summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2008-01-31[ALSA] hda-codec - Avoid wrong speaker-auto mute via mic jackJiang Zhe1-5/+19
When a mic jack is set up as the multiple I/O, it may issue the automute function wrongly. This patch fixes the wrong automute detection. Signed-off-by: Jiang Zhe <zhe.jiang@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda-codec - Add workaround for multiple HPsJiang Zhe1-0/+32
Dell laptops have multiple HP jacks that can be used for multi-channel outputs. The current auto pincfg handles the speaker as the primary output and thus cannot handle the multi-channel configuration for such cases. This patch adds a workaround to fix this issue by swapping the HP and speaker during multi-channel setup routines. Signed-off-by: Jiang Zhe <zhe.jiang@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda-codec - Update dell-m82 model pin configJiang Zhe1-2/+2
Updated dell-m82 model pin config table. The old config doesn't work with Dell 1210 and co. Signed-off-by: Jiang Zhe <zhe.jiang@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] sound/pci: remove duplicated definesNicolas Kaiser2-5/+0
Remove duplicated defines. (From their use it looks like 'midiDataOutx are written to rather than read from.) Signed-off-by: Nicolas Kaiser <nikai@nikai.net> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] sound: remove dead config symbol from sound codeJiri Olsa3-106/+0
remove dead config symbols from sound code Signed-off-by: Jiri Olsa <olsajiri@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] use convenient treble scale on WM8750Stanislav Brabec1-1/+1
On Zaurus SL-C3200 (terrier/spitz) based on WM8750, treble scale is inconveniently reverted (increase level = decrease treble), in opposite to bass scale, which uses convenient scale. Fix ALSA WM8750 mixer treble to use convenient treble scale (increase = increase treble level) From: Stanislav Brabec <utx@penguin.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] Update SNDRV_HWDEP_IFACE_LASTTakashi Iwai1-1/+1
Updated the forgotten SNDRV_HWDEP_IFACE_LAST to point the really last member. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] sound/pci: remove line duplications in definesNicolas Kaiser2-2/+0
Remove line duplications in defines. Acked-by: Thomas Sailer <sailer@ife.ee.ethz.ch> Signed-off-by: Nicolas Kaiser <nikai@nikai.net> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda: STAC9228 Subsystem updateMatthew Ranostay1-2/+4
Added more laptops subsystem id's that have STAC9228 DMIC support. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] cmipci - allow capture of raw spdif subframesTimofei Bondarenko1-1/+8
Enable capturing of raw 32bit IEC958_SUBFRAME. The 24-bits PCM data can be obtained using iec958 plugin. Known problem: captured stream may begin with either left or right subframe. Since the iec958 plugin doesn't decode preamble it may swap the channels sometime. Signed-off-by: Timofei Bondarenko <tim@ipi.ac.ru> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] cmipci - utilize ADC48K44K bitTimofei Bondarenko1-0/+7
Setting the ADC48K44K greatly improves capture quality at 48k sampling rate. With this bit clear ADC does ZOH interpolation of every 22th sample at 48k. At frequencies higher than 48k there ADC performs a little better with ADC48K44K bit set. At 44.1k ADC performs a little better with this bit clear. At frequencies below 44.1k there is no difference. Signed-off-by: Timofei Bondarenko <tim@ipi.ac.ru> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda-codec - new PCI SSID for HP machinesTakashi Iwai1-0/+3
Added new PCI SSIDs for HP machines with ALC262 codec. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda: STAC92HD71 codec mixerMatthew Ranostay1-5/+28
Added analog loopback support and missing ADC capture mixer for the STAC92HD71 codec family. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] ASoC: sh: improve generated code for HAC module (AC97)Manuel Lauss1-8/+5
Change loops in ac97_read/write functions to count down to zero rather than up. Gcc will then use the 'dt' (decrement-and-test) op instead of an increment/compare op-pair. Signed-off-by: Manuel Lauss <mano@roarinelk.homelinux.net> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda: Added new IDT codec familyMatthew Ranostay1-0/+149
Added initial support for the STAC92HD71BXX family of codecs. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] HDA-Intel - Add support for RV610/RV630 HDMI audioHerton Ronaldo Krzesinski1-0/+4
The Audio interface on HD2400/HD2600 cards isn't currently detected by snd-hda-intel. I added missing pci device ids for RV610 and RV630, but I only had a HD2400 pro card to test, where now the audio interface is detected (and no need to change patch_atihdmi.c, as the codec vendor id remains 0x1002aa01 for which we already have an entry there). I also couldn't test if sound pass-trough is ok (and I don't know how to), but at least now the device is detected. Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] [ML403-AC97CR] Fix capture/periodic overrun bugJoachim Foerster2-22/+4
We have to do fairly accurate counting of the minimal periods, instead of being lazy and just setting the number to zero as soon as one period elapses. Signed-off-by: Joachim Foerster <JOFT@gmx.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] Xilinx ML403 AC97 Controller Reference device driverJoachim Foerster5-0/+2098
Add ALSA support for the opb_ac97_controller_ref_v1_00_a ip core found in Xilinx' ML403 reference design. Known issue: Currently this driver hits a WARN_ON_ONCE(1) statement in kernel/irq/resend.c (line 70). According to Linus (http://lkml.org/lkml/2007/8/5/5) this may be ignored, right? I haven't had a look into this 'problem' yet. Signed-off-by: Joachim Foerster <JOFT@gmx.de> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda: STAC9228 DMICMatthew Ranostay1-3/+10
Added support for the dmics and enabled EAPD for several laptops with STAC9228 cards. Signed-off-by: Matthew Ranostay <mranostay@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] HDA: Add Asus VX1 supportTobin Davis1-0/+1
Simple patch to add the Asus VX1 laptop to the Analog Devices pci quirk list. Signed-off-by: Tobin Davis <tdavis@dsl-only.net> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] cmipci at 96kHzTimofei Bondarenko1-19/+64
This patch adds support for 88.2k, 96k, and 128k samplerates on cmi8738-55 chip. Analog playback works fine on all channels. Analog capture works well too, though the extra samples seems interpolated by hardware. spdif playback and capture works fine. Signed-off-by: Timofei Bondarenko <tim@ipi.ac.ru> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda-codec - Improve the auto-configurationTakashi Iwai1-0/+22
Some small improvements on autocfg stuff: - sort HP pins by sequence number, too - move sole mic pin to AUTO_PIN_MIC instead of AUTO_PIN_FRONT_MIC - ditto for line-in pin Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] usb-audio - SB Live24-External better handlingTimofei Bondarenko2-5/+39
This patch improves support for 'SB Live 24-bit Extarnal' USB card. 1) This card can go into muted state when a headphones connected or disconnected. So notify mixer about changes in headphone jack. 2) Add LED controls and procfs support just as in similar Audigy 2 NX card. 3) Rename 'PCM Capture' conrol to 'Mic Capture' to reflect reality: the card may adjust microphone input level only. Signed-off-by: Timofei Bondarenko <tim@ipi.ac.ru> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] opl3 - Fix build errorsTakashi Iwai3-0/+3
I applied a wrong patch for 'opl3 - simplify exclusive access lock'. Fixed now. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] Remove sequencer instrument layerTakashi Iwai26-5603/+5
Remove sequencer instrument layer from the tree. This mechanism hasn't been used much with the actual devices. The only reasonable user was OPL3 loader, and now it was rewritten to use hwdep instead. So, let's remove the rest of rotten codes. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] opl3 - simplify exclusive access lockTakashi Iwai4-25/+12
Use the exclusive access lock in hwdep instead of the own one. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] opl3 - Use hwdep for patch loadingTakashi Iwai7-156/+289
Use the hwdep device for loading OPL2/3 patch data instead of the messy sequencer instrument layer. Due to this change, the sbiload program should be updated, too. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] Dreamcast AICA sound - Get rid of annoying compiler warningTakashi Iwai1-0/+1
This patch supresses an annoying compiler warning that the variable err may be used uninitialised. Signed-off by: Adrian McMenamin <adrian@mcmen.demon.co.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] ac97_patch: compilation warning fixKrzysztof Helt1-0/+2
This patch kills these two compilation warnings if power management is disabled: sound/pci/ac97/ac97_patch.h:86: warning: 'snd_ac97_restore_status' declared 'static' but never defined sound/pci/ac97/ac97_patch.h:87: warning: 'snd_ac97_restore_iec958' declared 'static' but never defined Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] Introduce slots option to snd moduleTakashi Iwai2-1/+56
Introduced the global 'slots' option to snd module. This option provides an alternative way to handle the order of multiple sound card instances. It's an easier approach to avoid conflict with hotplug devices, and can be used together with the existing 'order' option of each card driver. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda-codec - Show more information in proc fileTakashi Iwai1-9/+22
Show the current EAPD status and volume-knob status in proc file. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] soc - ln2440sbc ac97 supportIvan Kuten5-2/+104
This patch adds ac97 support for ln2440sbc board from LittleChips. This board is based on s3c2440 SoC + AC97 Realtek ALC650 codec. Existing s3c2443 implementation is slightly modified because s3c2440 and s3c2443 have different AC97 interrupts. Signed-off-by: Ivan Kuten <ivan.kuten@promwad.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] HDA: Add support for Samsung Q1 Ultra Vista editionTobin Davis2-0/+83
This patch adds full record and playback support for the Samsung Q1 Ultra - Vista model (different codec than the earlier Q1 Ultra models). Signed-off-by: Tobin Davis <tdavis@dsl-only.net> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] via82xx - Fix quirk for Shuttle AK32VNTakashi Iwai1-2/+8
Fix quirk for Shuttle AK32VN. It works better with DXS_SRC, and needs HP_ONLY ac97 quirk. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] ad1848 - Fix print formatTakashi Iwai1-1/+1
Fixed the print format for debug message. Spotted by Matthew Wilcox. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] writing-an-alsa-driver.tmpl: English style improvementsMichael Opdenacker1-462/+458
This patch brings some English style improvements throughout the document, as well as 1 or 2 extra technical details. Signed-off-by: Michael Opdenacker <michael@free-electrons.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] ice1724 - Add support of Onkyo SE-90PCI and SE-200PCIShin-ya Okada6-2/+729
Added the support for Onkyo SE-90PCI and SE-200PCI boards. Signed-off-by: Shin-ya Okada <sh_okada at d4.dion.ne.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] soc - Add 'Mono Playback Switch' to WM9712 codec driverMike Rapoport1-3/+4
The following patch adds 'Mono Playback Switch' control to WM9712 codec SoC driver. Also, it fixes Treble, Bass and Mono playback volume inversion bits. Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda-codec - Add model for Fujitsu V5505Takashi Iwai1-0/+1
Added model=laptop for Fujitsu V5505 with Cxt5405 codec. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda: STAC9228 updated DMUX nidMatthew Ranostay1-1/+1
Changed the dmux for STAC9228 from ADC1MUX to ADC0MUX to avoid confusion. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda: Add dmux to STAC 9228Matthew Ranostay1-8/+13
Added a dmux to the STAC9228 cards with DMIC support. And added a STAC_DIGITAL_INPUT_SOURCE macro for repeating mixer code. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda-codec - Add STAC9228 DMIC supportMatthew Ranostay2-3/+16
Added the missing STAC9228 DMIC support. Also added a new vendor id tag for IDT. Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31[ALSA] hda-codec - Add missing eeepc-p701 model for ALC662Takashi Iwai2-0/+2
Added the missing model string 'eeepc-p701' for ALC662 codec. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31Merge branch 'for-2.6.25' of ↵Linus Torvalds612-24195/+59494
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'for-2.6.25' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (454 commits) [POWERPC] Cell IOMMU fixed mapping support [POWERPC] Split out the ioid fetching/checking logic [POWERPC] Add support to cell_iommu_setup_page_tables() for multiple windows [POWERPC] Split out the IOMMU logic from cell_dma_dev_setup() [POWERPC] Split cell_iommu_setup_hardware() into two parts [POWERPC] Split out the logic that allocates struct iommus [POWERPC] Allocate the hash table under 1G on cell [POWERPC] Add set_dma_ops() to match get_dma_ops() [POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format. [POWERPC] 85xx: Only invalidate TLB0 and TLB1 [POWERPC] 83xx: Fix typo in mpc837x compatible entries [POWERPC] 85xx: convert sbc85* boards to use machine_device_initcall [POWERPC] 83xx: rework platform Kconfig [POWERPC] 85xx: rework platform Kconfig [POWERPC] 86xx: Remove unused IRQ defines [POWERPC] QE: Explicitly set address-cells and size cells for muram [POWERPC] Convert StorCenter DTS file to /dts-v1/ format. [POWERPC] 86xx: Convert all 86xx DTS files to /dts-v1/ format. [PPC] Remove 85xx from arch/ppc [PPC] Remove 83xx from arch/ppc ...
2008-01-31[POWERPC] Cell IOMMU fixed mapping supportMichael Ellerman1-2/+267
This patch adds support for setting up a fixed IOMMU mapping on certain cell machines. For 64-bit devices this avoids the performance overhead of mapping and unmapping pages at runtime. 32-bit devices are unable to use the fixed mapping. The fixed mapping is established at boot, and maps all of physical memory 1:1 into device space at some offset. On machines with < 30 GB of memory we setup the fixed mapping immediately above the normal IOMMU window. For example a machine with 4GB of memory would end up with the normal IOMMU window from 0-2GB and the fixed mapping window from 2GB to 6GB. In this case a 64-bit device wishing to DMA to 1GB would be told to DMA to 3GB, plus any offset required by firmware. The firmware offset is encoded in the "dma-ranges" property. On machines with 30GB or more of memory, we are unable to place the fixed mapping above the normal IOMMU window as we would run out of address space. Instead we move the normal IOMMU window to coincide with the hash page table, this region does not need to be part of the fixed mapping as no device should ever be DMA'ing to it. We then setup the fixed mapping from 0 to 32GB. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-31[POWERPC] Split out the ioid fetching/checking logicMichael Ellerman1-6/+17
Split out the ioid fetching and checking logic so we can use it elsewhere in a subsequent patch. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-31[POWERPC] Add support to cell_iommu_setup_page_tables() for multiple windowsMichael Ellerman1-5/+10
Add support to cell_iommu_setup_page_tables() for handling two windows, the dynamic window and the fixed window. A fixed window size of 0 indicates that there is no fixed window at all. Currently there are no callers who pass a non-zero fixed window, but the upcoming fixed IOMMU mapping patch will change that. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-31[POWERPC] Split out the IOMMU logic from cell_dma_dev_setup()Michael Ellerman1-6/+13
Split the IOMMU logic out from cell_dma_dev_setup() into a separate function. If we're not using dma_direct_ops or dma_iommu_ops we don't know what the hell's going on, so BUG. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-31[POWERPC] Split cell_iommu_setup_hardware() into two partsMichael Ellerman1-12/+26
Split cell_iommu_setup_hardware() into two parts. Split the page table setup into cell_iommu_setup_page_tables() and the bits that kick the hardware into cell_iommu_enable_hardware(). Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-31[POWERPC] Split out the logic that allocates struct iommusMichael Ellerman1-4/+16
Split out the logic that allocates a struct iommu into a separate function. This can fail however the calling code has never cared - so just return if we can't allocate an iommu. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-30 23:31:45 +0000