| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Patch series "nilfs2 lockdep warning fixes".
The first two are to resolve the lockdep warning issue, and the last one
is the accompanying cleanup and low priority.
Based on your comment, this series solves the issue by separating inode
object as needed. Since I was worried about the impact of the object
composition changes, I tested the series carefully not to cause
regressions especially for delicate functions such like disk space
reclamation and snapshots.
This patch (of 3):
If CONFIG_LOCKDEP is enabled, nilfs2 hits lockdep warnings at
inode_to_wb() during page/folio operations for btree nodes:
WARNING: CPU: 0 PID: 6575 at include/linux/backing-dev.h:269 inode_to_wb include/linux/backing-dev.h:269 [inline]
WARNING: CPU: 0 PID: 6575 at include/linux/backing-dev.h:269 folio_account_dirtied mm/page-writeback.c:2460 [inline]
WARNING: CPU: 0 PID: 6575 at include/linux/backing-dev.h:269 __folio_mark_dirty+0xa7c/0xe30 mm/page-writeback.c:2509
Modules linked in:
...
RIP: 0010:inode_to_wb include/linux/backing-dev.h:269 [inline]
RIP: 0010:folio_account_dirtied mm/page-writeback.c:2460 [inline]
RIP: 0010:__folio_mark_dirty+0xa7c/0xe30 mm/page-writeback.c:2509
...
Call Trace:
__set_page_dirty include/linux/pagemap.h:834 [inline]
mark_buffer_dirty+0x4e6/0x650 fs/buffer.c:1145
nilfs_btree_propagate_p fs/nilfs2/btree.c:1889 [inline]
nilfs_btree_propagate+0x4ae/0xea0 fs/nilfs2/btree.c:2085
nilfs_bmap_propagate+0x73/0x170 fs/nilfs2/bmap.c:337
nilfs_collect_dat_data+0x45/0xd0 fs/nilfs2/segment.c:625
nilfs_segctor_apply_buffers+0x14a/0x470 fs/nilfs2/segment.c:1009
nilfs_segctor_scan_file+0x47a/0x700 fs/nilfs2/segment.c:1048
nilfs_segctor_collect_blocks fs/nilfs2/segment.c:1224 [inline]
nilfs_segctor_collect fs/nilfs2/segment.c:1494 [inline]
nilfs_segctor_do_construct+0x14f3/0x6c60 fs/nilfs2/segment.c:2036
nilfs_segctor_construct+0x7a7/0xb30 fs/nilfs2/segment.c:2372
nilfs_segctor_thread_construct fs/nilfs2/segment.c:2480 [inline]
nilfs_segctor_thread+0x3c3/0xf90 fs/nilfs2/segment.c:2563
kthread+0x405/0x4f0 kernel/kthread.c:327
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295
This is because nilfs2 uses two page caches for each inode and
inode->i_mapping never points to one of them, the btree node cache.
This causes inode_to_wb(inode) to refer to a different page cache than
the caller page/folio operations such like __folio_start_writeback(),
__folio_end_writeback(), or __folio_mark_dirty() acquired the lock.
This patch resolves the issue by allocating and using an additional
inode to hold the page cache of btree nodes. The inode is attached
one-to-one to the traditional nilfs2 inode if it requires a block
mapping with b-tree. This setup change is in memory only and does not
affect the disk format.
Link: https://lkml.kernel.org/r/1647867427-30498-1-git-send-email-konishi.ryusuke@gmail.com
Link: https://lkml.kernel.org/r/1647867427-30498-2-git-send-email-konishi.ryusuke@gmail.com
Link: https://lore.kernel.org/r/YXrYvIo8YRnAOJCj@casper.infradead.org
Link: https://lore.kernel.org/r/9a20b33d-b38f-b4a2-4742-c1eb5b8e4d6c@redhat.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+0d5b462a6f07447991b3@syzkaller.appspotmail.com
Reported-by: syzbot+34ef28bb2aeb28724aa0@syzkaller.appspotmail.com
Reported-by: Hao Sun <sunhao.th@gmail.com>
Reported-by: David Hildenbrand <david@redhat.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There is a reported crash when mounting ocfs2 with quota enabled.
RIP: 0010:ocfs2_qinfo_lock_res_init+0x44/0x50 [ocfs2]
Call Trace:
ocfs2_local_read_info+0xb9/0x6f0 [ocfs2]
dquot_load_quota_sb+0x216/0x470
dquot_load_quota_inode+0x85/0x100
ocfs2_enable_quotas+0xa0/0x1c0 [ocfs2]
ocfs2_fill_super.cold+0xc8/0x1bf [ocfs2]
mount_bdev+0x185/0x1b0
legacy_get_tree+0x27/0x40
vfs_get_tree+0x25/0xb0
path_mount+0x465/0xac0
__x64_sys_mount+0x103/0x140
It is caused by when initializing dqi_gqlock, the corresponding dqi_type
and dqi_sb are not properly initialized.
This issue is introduced by commit 6c85c2c72819, which wants to avoid
accessing uninitialized variables in error cases. So make global quota
info properly initialized.
Link: https://lkml.kernel.org/r/20220323023644.40084-1-joseph.qi@linux.alibaba.com
Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1007141
Fixes: 6c85c2c72819 ("ocfs2: quota_local: fix possible uninitialized-variable access in ocfs2_local_read_info()")
Signed-off-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Reported-by: Dayvison <sathlerds@gmail.com>
Tested-by: Valentin Vidic <vvidic@valentin-vidic.from.hr>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This reverts commit 08095d6310a7 ("mm: madvise: skip unmapped vma holes
passed to process_madvise") as process_madvise() fails to return the
exact processed bytes in other cases too.
As an example: if process_madvise() hits mlocked pages after processing
some initial bytes passed in [start, end), it just returns EINVAL
although some bytes are processed. Thus making an exception only for
ENOMEM is partially fixing the problem of returning the proper advised
bytes.
Thus revert this patch and return proper bytes advised.
Link: https://lkml.kernel.org/r/e73da1304a88b6a8a11907045117cccf4c2b8374.1648046642.git.quic_charante@quicinc.com
Fixes: 08095d6310a7ce ("mm: madvise: skip unmapped vma holes passed to process_madvise")
Signed-off-by: Charan Teja Kalla <quic_charante@quicinc.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml
Pull UML updates from Richard Weinberger:
- Devicetree support (for testing)
- Various cleanups and fixes: UBD, port_user, uml_mconsole
- Maintainer update
* tag 'for-linus-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
um: run_helper: Write error message to kernel log on exec failure on host
um: port_user: Improve error handling when port-helper is not found
um: port_user: Allow setting path to port-helper using UML_PORT_HELPER envvar
um: port_user: Search for in.telnetd in PATH
um: clang: Strip out -mno-global-merge from USER_CFLAGS
docs: UML: Mention telnetd for port channel
um: Remove unused timeval_to_ns() function
um: Fix uml_mconsole stop/go
um: Cleanup syscall_handler_t definition/cast, fix warning
uml: net: vector: fix const issue
um: Fix WRITE_ZEROES in the UBD Driver
um: Migrate vector drivers to NAPI
um: Fix order of dtb unflatten/early init
um: fix and optimize xor select template for CONFIG64 and timetravel mode
um: Document dtb command line option
lib/logic_iomem: correct fallback config references
um: Remove duplicated include in syscalls_64.c
MAINTAINERS: Update UserModeLinux entry
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs
Pull JFFS2, UBI and UBIFS updates from Richard Weinberger:
"JFFS2:
- Fixes for various memory issues
UBI:
- Fix for a race condition in cdev ioctl handler
UBIFS:
- Fixes for O_TMPFILE and whiteout handling
- Fixes for various memory issues"
* tag 'for-linus-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
ubifs: rename_whiteout: correct old_dir size computing
jffs2: fix memory leak in jffs2_scan_medium
jffs2: fix memory leak in jffs2_do_mount_fs
jffs2: fix use-after-free in jffs2_clear_xattr_subsystem
fs/jffs2: fix comments mentioning i_mutex
ubi: fastmap: Return error code if memory allocation fails in add_aeb()
ubifs: Fix to add refcount once page is set private
ubifs: Fix read out-of-bounds in ubifs_wbuf_write_nolock()
ubifs: setflags: Make dirtied_ino_d 8 bytes aligned
ubifs: Rectify space amount budget for mkdir/tmpfile operations
ubifs: Fix 'ui->dirty' race between do_tmpfile() and writeback work
ubifs: Rename whiteout atomically
ubifs: Add missing iput if do_tmpfile() failed in rename whiteout
ubifs: Fix wrong number of inodes locked by ui_mutex in ubifs_inode comment
ubifs: Fix deadlock in concurrent rename whiteout and inode writeback
ubifs: rename_whiteout: Fix double free for whiteout_ui->data
ubi: Fix race condition between ctrl_cdev_ioctl and ubi_cdev_ioctl
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 fixes from Andreas Gruenbacher:
- To avoid deadlocks, actively cancel dlm locking requests when we give
up on them.
Further dlm operations on the same lock will return -EBUSY until the
cancel has been completed, so in that case, wait and repeat. (This is
rare.)
- Lock inversion fixes in gfs2_inode_lookup() and gfs2_create_inode().
- Some more fallout from the gfs2 mmap + page fault deadlock fixes
(merged in commit c03098d4b9ad7: "Merge tag 'gfs2-v5.15-rc5-mmap-fault'").
- Various other minor bug fixes and cleanups.
* tag 'gfs2-v5.17-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Make sure FITRIM minlen is rounded up to fs block size
gfs2: Make sure not to return short direct writes
gfs2: Remove dead code in gfs2_file_read_iter
gfs2: Fix gfs2_file_buffered_write endless loop workaround
gfs2: Minor retry logic cleanup
gfs2: Disable page faults during lockless buffered reads
gfs2: Fix should_fault_in_pages() logic
gfs2: Remove return value for gfs2_indirect_init
gfs2: Initialize gh_error in gfs2_glock_nq
gfs2: Make use of list_is_first
gfs2: Switch lock order of inode and iopen glock
gfs2: cancel timed-out glock requests
gfs2: Expect -EBUSY after canceling dlm locking requests
gfs2: gfs2_setattr_size error path fix
gfs2: assign rgrp glock before compute_bitstructs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull netfs updates from David Howells:
"Netfs prep for write helpers.
Having had a go at implementing write helpers and content encryption
support in netfslib, it seems that the netfs_read_{,sub}request
structs and the equivalent write request structs were almost the same
and so should be merged, thereby requiring only one set of
alloc/get/put functions and a common set of tracepoints.
Merging the structs also has the advantage that if a bounce buffer is
added to the request struct, a read operation can be performed to fill
the bounce buffer, the contents of the buffer can be modified and then
a write operation can be performed on it to send the data wherever it
needs to go using the same request structure all the way through. The
I/O handlers would then transparently perform any required crypto.
This should make it easier to perform RMW cycles if needed.
The potentially common functions and structs, however, by their names
all proclaim themselves to be associated with the read side of things.
The bulk of these changes alter this in the following ways:
- Rename struct netfs_read_{,sub}request to netfs_io_{,sub}request.
- Rename some enums, members and flags to make them more appropriate.
- Adjust some comments to match.
- Drop "read"/"rreq" from the names of common functions. For
instance, netfs_get_read_request() becomes netfs_get_request().
- The ->init_rreq() and ->issue_op() methods become ->init_request()
and ->issue_read(). I've kept the latter as a read-specific
function and in another branch added an ->issue_write() method.
The driver source is then reorganised into a number of files:
fs/netfs/buffered_read.c Create read reqs to the pagecache
fs/netfs/io.c Dispatchers for read and write reqs
fs/netfs/main.c Some general miscellaneous bits
fs/netfs/objects.c Alloc, get and put functions
fs/netfs/stats.c Optional procfs statistics.
and future development can be fitted into this scheme, e.g.:
fs/netfs/buffered_write.c Modify the pagecache
fs/netfs/buffered_flush.c Writeback from the pagecache
fs/netfs/direct_read.c DIO read support
fs/netfs/direct_write.c DIO write support
fs/netfs/unbuffered_write.c Write modifications directly back
Beyond the above changes, there are also some changes that affect how
things work:
- Make fscache_end_operation() generally available.
- In the netfs tracing header, generate enums from the symbol ->
string mapping tables rather than manually coding them.
- Add a struct for filesystems that uses netfslib to put into their
inode wrapper structs to hold extra state that netfslib is
interested in, such as the fscache cookie. This allows netfslib
functions to be set in filesystem operation tables and jumped to
directly without having to have a filesystem wrapper.
- Add a member to the struct added above to track the remote inode
length as that may differ if local modifications are buffered. We
may need to supply an appropriate EOF pointer when storing data (in
AFS for example).
- Pass extra information to netfs_alloc_request() so that the
->init_request() hook can access it and retain information to
indicate the origin of the operation.
- Make the ->init_request() hook return an error, thereby allowing a
filesystem that isn't allowed to cache an inode (ceph or cifs, for
example) to skip readahead.
- Switch to using refcount_t for subrequests and add tracepoints to
log refcount changes for the request and subrequest structs.
- Add a function to consolidate dispatching a read request. Similar
code is used in three places and another couple are likely to be
added in the future"
Link: https://lore.kernel.org/all/2639515.1648483225@warthog.procyon.org.uk/
* tag 'netfs-prep-20220318' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
afs: Maintain netfs_i_context::remote_i_size
netfs: Keep track of the actual remote file size
netfs: Split some core bits out into their own file
netfs: Split fs/netfs/read_helper.c
netfs: Rename read_helper.c to io.c
netfs: Prepare to split read_helper.c
netfs: Add a function to consolidate beginning a read
netfs: Add a netfs inode context
ceph: Make ceph_init_request() check caps on readahead
netfs: Change ->init_request() to return an error code
netfs: Refactor arguments for netfs_alloc_read_request
netfs: Adjust the netfs_failure tracepoint to indicate non-subreq lines
netfs: Trace refcounting on the netfs_io_subrequest struct
netfs: Trace refcounting on the netfs_io_request struct
netfs: Adjust the netfs_rreq tracepoint slightly
netfs: Split netfs_io_* object handling out
netfs: Finish off rename of netfs_read_request to netfs_io_request
netfs: Rename netfs_read_*request to netfs_io_*request
netfs: Generate enums from trace symbol mapping lists
fscache: export fscache_end_operation()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator fixes from Jason Donenfeld:
- If a hardware random number generator passes a sufficiently large
chunk of entropy to random.c during early boot, we now skip the
"fast_init" business and let it initialize the RNG.
This makes CONFIG_RANDOM_TRUST_BOOTLOADER=y actually useful.
- We already have the command line `random.trust_cpu=0/1` option for
RDRAND, which let distros enable CONFIG_RANDOM_TRUST_CPU=y while
placating concerns of more paranoid users.
Now we add `random.trust_bootloader=0/1` so that distros can
similarly enable CONFIG_RANDOM_TRUST_BOOTLOADER=y.
- Re-add a comment that got removed by accident in the recent revert.
- Add the spec-compliant ACPI CID for vmgenid, which Microsoft added to
the vmgenid spec at Ard's request during earlier review.
- Restore build-time randomness via the latent entropy plugin, which
was lost when we transitioned to using a hash function.
* tag 'random-5.18-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
random: mix build-time latent entropy into pool at init
virt: vmgenid: recognize new CID added by Hyper-V
random: re-add removed comment about get_random_{u32,u64} reseeding
random: treat bootloader trust toggle the same way as cpu trust toggle
random: skip fast_init if hwrng provides large chunk of entropy
|
|
git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- add support for BCM4908
- renesas_wdt: add R-Car Gen4 support
- improve watchdog_dev function documentation
- sp5100_tco: replace the cd6h/cd7h port I/O with MMIO accesses during
initialization
- several other small improvements and fixes
* tag 'linux-watchdog-5.18-rc1' of git://www.linux-watchdog.org/linux-watchdog:
Watchdog: sp5100_tco: Enable Family 17h+ CPUs
Watchdog: sp5100_tco: Add initialization using EFCH MMIO
Watchdog: sp5100_tco: Refactor MMIO base address initialization
Watchdog: sp5100_tco: Move timer initialization into function
watchdog: ixp4xx: Implement restart
watchdog: orion_wdt: support pretimeout on Armada-XP
watchdog: allow building BCM7038_WDT for BCM4908
watchdog: renesas_wdt: Add R-Car Gen4 support
dt-bindings: watchdog: renesas-wdt: Document r8a779f0 support
watchdog: Improve watchdog_dev function documentation
watchdog: aspeed: add nowayout support
watchdog: rti-wdt: Add missing pm_runtime_disable() in probe function
watchdog: imx2_wdg: Alow ping on suspend
|
|
Pull auxdisplay updates from Miguel Ojeda:
"A few auxdisplay lcd2s improvements from Andy Shevchenko"
* tag 'auxdisplay-for-linus-v5.18-rc1' of https://github.com/ojeda/linux:
auxdisplay: lcd2s: Use array size explicitly in lcd2s_gotoxy()
auxdisplay: lcd2s: Switch to i2c ->probe_new()
auxdisplay: lcd2s: use module_i2c_driver to simplify the code
auxdisplay: lcd2s: make use of device property API
auxdisplay: lcd2s: Fix multi-line comment style
|
|
Pull virtio updates from Michael Tsirkin:
- vdpa generic device type support
- more virtio hardening for broken devices (but on the same theme,
revert some virtio hotplug hardening patches - they were misusing
some interrupt flags and had to be reverted)
- RSS support in virtio-net
- max device MTU support in mlx5 vdpa
- akcipher support in virtio-crypto
- shared IRQ support in ifcvf vdpa
- a minor performance improvement in vhost
- enable virtio mem for ARM64
- beginnings of advance dma support
- cleanups, fixes all over the place
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (33 commits)
vdpa/mlx5: Avoid processing works if workqueue was destroyed
vhost: handle error while adding split ranges to iotlb
vdpa: support exposing the count of vqs to userspace
vdpa: change the type of nvqs to u32
vdpa: support exposing the config size to userspace
vdpa/mlx5: re-create forwarding rules after mac modified
virtio: pci: check bar values read from virtio config space
Revert "virtio_pci: harden MSI-X interrupts"
Revert "virtio-pci: harden INTX interrupts"
drivers/net/virtio_net: Added RSS hash report control.
drivers/net/virtio_net: Added RSS hash report.
drivers/net/virtio_net: Added basic RSS support.
drivers/net/virtio_net: Fixed padded vheader to use v1 with hash.
virtio: use virtio_device_ready() in virtio_device_restore()
tools/virtio: compile with -pthread
tools/virtio: fix after premapped buf support
virtio_ring: remove flags check for unmap packed indirect desc
virtio_ring: remove flags check for unmap split indirect desc
virtio_ring: rename vring_unmap_state_packed() to vring_unmap_extra_packed()
net/mlx5: Add support for configuring max device MTU
...
|
|
Prior, the "input_pool_data" array needed no real initialization, and so
it was easy to mark it with __latent_entropy to populate it during
compile-time. In switching to using a hash function, this required us to
specifically initialize it to some specific state, which means we
dropped the __latent_entropy attribute. An unfortunate side effect was
this meant the pool was no longer seeded using compile-time random data.
In order to bring this back, we declare an array in rand_initialize()
with __latent_entropy and call mix_pool_bytes() on that at init, which
accomplishes the same thing as before. We make this __initconst, so that
it doesn't take up space at runtime after init.
Fixes: 6e8ec2552c7d ("random: use computational hash for entropy extraction")
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These are fixes and cleanup on top of the previously merged ACPI
material.
Specifics:
- Avoid out-of-bounds access when parsing _CPC data (Rafael Wysocki)
- Change default error code and clean up debug messages in ACPI CPPC
probe (Rafael Wysocki)
- Replace usage of found with dedicated list iterator variable in the
ACPI IPMI driver (Jakob Koschel)
- Clean up variable name confusion in APEI (Jakob Koschel)
- Make LAPIC_ADDR_OVR address readable in a message parsed during
MADT parsing (Vasant Hegde)"
* tag 'acpi-5.18-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: CPPC: Change default error code and clean up debug messages in probe
ACPI: CPPC: Avoid out of bounds access when parsing _CPC data
ACPI: tables: Make LAPIC_ADDR_OVR address readable in message
ACPI: IPMI: replace usage of found with dedicated list iterator variable
ACPI, APEI: Use the correct variable for sizeof()
|
|
Pull more documentation updates from Jonathan Corbet:
"Some late-arriving documentation improvements.
This is mostly build-system fixes from Mauro and Akira; I also took
the liberty of dropping in my 'messy diffstat' document"
* tag 'docs-5.18-2' of git://git.lwn.net/linux:
docs: Add a document on how to fix a messy diffstat
docs: sphinx/requirements: Limit jinja2<3.1
Documentation: kunit: Fix cross-referencing warnings
scripts/kernel-doc: change the line number meta info
scripts/get_abi: change the file/line number meta info
docs: kernel_include.py: add sphinx build dependencies
docs: kernel_abi.py: add sphinx build dependencies
docs: kernel_feat.py: add build dependencies
scripts/get_feat.pl: allow output the parsed file names
docs: kfigure.py: Don't warn of missing PDF converter in 'make htmldocs'
Documentation: Fix duplicate statement about raw_spinlock_t type
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add new environment variables, USERCFLAGS and USERLDFLAGS to allow
additional flags to be passed to user-space programs.
- Fix missing fflush() bugs in Kconfig and fixdep
- Fix a minor bug in the comment format of the .config file
- Make kallsyms ignore llvm's local labels, .L*
- Fix UAPI compile-test for cross-compiling with Clang
- Extend the LLVM= syntax to support LLVM=<suffix> form for using a
particular version of LLVm, and LLVM=<prefix> form for using custom
LLVM in a particular directory path.
- Clean up Makefiles
* tag 'kbuild-v5.18-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: Make $(LLVM) more flexible
kbuild: add --target to correctly cross-compile UAPI headers with Clang
fixdep: use fflush() and ferror() to ensure successful write to files
arch: syscalls: simplify uapi/kapi directory creation
usr/include: replace extra-y with always-y
certs: simplify empty certs creation in certs/Makefile
certs: include certs/signing_key.x509 unconditionally
kallsyms: ignore all local labels prefixed by '.L'
kconfig: fix missing '# end of' for empty menu
kconfig: add fflush() before ferror() check
kbuild: replace $(if A,A,B) with $(or A,B)
kbuild: Add environment variables for userprogs flags
kbuild: unify cmd_copy and cmd_shipped
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"This addresses an -Warray-bounds warning found under a few ARM
defconfigs, and disables long-broken HARDENED_USERCOPY_PAGESPAN"
* tag 'hardening-v5.18-rc1-fix1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
ARM/dma-mapping: Remove CMA code when not built with CMA
usercopy: Disable CONFIG_HARDENED_USERCOPY_PAGESPAN
|
|
Per fstrim(8) we must round up the minlen argument to the fs block size.
The current calculation doesn't take into account devices that have a
discard granularity and requested minlen less than 1 fs block, so the
value can get shifted away to zero in the translation to fs blocks.
The zero minlen passed to gfs2_rgrp_send_discards() then allows
sb_issue_discard() to be called with nr_sects == 0 which returns -EINVAL
and results in gfs2_rgrp_send_discards() returning -EIO.
Make sure minlen is never < 1 fs block by taking the max of the
requested minlen and the fs block size before comparing to the device's
discard granularity and shifting to fs blocks.
Fixes: 076f0faa764ab ("GFS2: Fix FITRIM argument handling")
Signed-off-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull more networking updates from Jakub Kicinski:
"Networking fixes and rethook patches.
Features:
- kprobes: rethook: x86: replace kretprobe trampoline with rethook
Current release - regressions:
- sfc: avoid null-deref on systems without NUMA awareness in the new
queue sizing code
Current release - new code bugs:
- vxlan: do not feed vxlan_vnifilter_dump_dev with non-vxlan devices
- eth: lan966x: fix null-deref on PHY pointer in timestamp ioctl when
interface is down
Previous releases - always broken:
- openvswitch: correct neighbor discovery target mask field in the
flow dump
- wireguard: ignore v6 endpoints when ipv6 is disabled and fix a leak
- rxrpc: fix call timer start racing with call destruction
- rxrpc: fix null-deref when security type is rxrpc_no_security
- can: fix UAF bugs around echo skbs in multiple drivers
Misc:
- docs: move netdev-FAQ to the 'process' section of the
documentation"
* tag 'net-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (57 commits)
vxlan: do not feed vxlan_vnifilter_dump_dev with non vxlan devices
openvswitch: Add recirc_id to recirc warning
rxrpc: fix some null-ptr-deref bugs in server_key.c
rxrpc: Fix call timer start racing with call destruction
net: hns3: fix software vlan talbe of vlan 0 inconsistent with hardware
net: hns3: fix the concurrency between functions reading debugfs
docs: netdev: move the netdev-FAQ to the process pages
docs: netdev: broaden the new vs old code formatting guidelines
docs: netdev: call out the merge window in tag checking
docs: netdev: add missing back ticks
docs: netdev: make the testing requirement more stringent
docs: netdev: add a question about re-posting frequency
docs: netdev: rephrase the 'should I update patchwork' question
docs: netdev: rephrase the 'Under review' question
docs: netdev: shorten the name and mention msgid for patch status
docs: netdev: note that RFC postings are allowed any time
docs: netdev: turn the net-next closed into a Warning
docs: netdev: move the patch marking section up
docs: netdev: minor reword
docs: netdev: replace references to old archives
...
|
|
The MAX_CMA_AREAS could be set to 0, which would result in code that would
attempt to operate beyond the end of a zero-sized array. If CONFIG_CMA
is disabled, just remove this code entirely. Found when building arm
on GCC 10.x for several defconfigs (e.g. axm55xx_defconfig) under
-Warray-bounds:
arch/arm/mm/dma-mapping.c:396:22: warning: array subscript <unknown> is outside array bounds of 'struct dma_contig_early_reserve[0]' [-Warray-bounds]
396 | dma_mmu_remap[dma_mmu_remap_num].size = size;
| ~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~
arch/arm/mm/dma-mapping.c:389:40: note: while referencing 'dma_mmu_remap'
389 | static struct dma_contig_early_reserve dma_mmu_remap[MAX_CMA_AREAS] __initdata;
| ^~~~~~~~~~~~~
Cc: Russell King <linux@armlinux.org.uk>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Martin Oliveira <martin.oliveira@eideticom.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/all/6243ee60.1c69fb81.16de6.7dbf@mx.google.com/
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/lkml/20220310070041.GA24874@lst.de
Reviewed-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/lkml/9059fa71-330f-f04f-b155-2850abb72a71@redhat.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
- Missing Kconfig dependency on arm that leads to boot failure
- x86 SLS fixes
- Reference leak in the stm32 driver
* tag 'v5.18-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: x86/sm3 - Fixup SLS
crypto: x86/poly1305 - Fixup SLS
crypto: x86/chacha20 - Avoid spurious jumps to other functions
crypto: stm32 - fix reference leak in stm32_crc_remove
crypto: arm/aes-neonbs-cbc - Select generic cbc and aes
|
|
Merge IMPI driver changes, ACPI tables parsing code changes and
additional APEI changes for v5.18-rc1:
- Replace usage of found with dedicated list iterator variable
in the ACPI IPMI driver (Jakob Koschel).
- Make LAPIC_ADDR_OVR address readable in a message parsed during
MADT parsing (Vasant Hegde).
- Clean up variable name confusion in APEI (Jakob Koschel).
* acpi-ipmi:
ACPI: IPMI: replace usage of found with dedicated list iterator variable
* acpi-tables:
ACPI: tables: Make LAPIC_ADDR_OVR address readable in message
* acpi-apei:
ACPI, APEI: Use the correct variable for sizeof()
|
|
vxlan_vnifilter_dump_dev() assumes it is called only
for vxlan devices. Make sure it is the case.
BUG: KASAN: slab-out-of-bounds in vxlan_vnifilter_dump_dev+0x9a0/0xb40 drivers/net/vxlan/vxlan_vnifilter.c:349
Read of size 4 at addr ffff888060d1ce70 by task syz-executor.3/17662
CPU: 0 PID: 17662 Comm: syz-executor.3 Tainted: G W 5.17.0-syzkaller-12888-g77c9387c0c5b #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
print_address_description.constprop.0.cold+0xeb/0x495 mm/kasan/report.c:313
print_report mm/kasan/report.c:429 [inline]
kasan_report.cold+0xf4/0x1c6 mm/kasan/report.c:491
vxlan_vnifilter_dump_dev+0x9a0/0xb40 drivers/net/vxlan/vxlan_vnifilter.c:349
vxlan_vnifilter_dump+0x3ff/0x650 drivers/net/vxlan/vxlan_vnifilter.c:428
netlink_dump+0x4b5/0xb70 net/netlink/af_netlink.c:2270
__netlink_dump_start+0x647/0x900 net/netlink/af_netlink.c:2375
netlink_dump_start include/linux/netlink.h:245 [inline]
rtnetlink_rcv_msg+0x70c/0xb80 net/core/rtnetlink.c:5953
netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2496
netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
netlink_unicast+0x543/0x7f0 net/netlink/af_netlink.c:1345
netlink_sendmsg+0x904/0xe00 net/netlink/af_netlink.c:1921
sock_sendmsg_nosec net/socket.c:705 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:725
____sys_sendmsg+0x6e2/0x800 net/socket.c:2413
___sys_sendmsg+0xf3/0x170 net/socket.c:2467
__sys_sendmsg+0xe5/0x1b0 net/socket.c:2496
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0x80 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f87b8e89049
Fixes: f9c4bb0b245c ("vxlan: vni filtering support on collect metadata device")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Acked-by: Roopa Prabhu <roopa@nvidia.com>
Link: https://lore.kernel.org/r/20220330194643.2706132-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When hitting the recirculation limit, the kernel would currently log
something like this:
[ 58.586597] openvswitch: ovs-system: deferred action limit reached, drop recirc action
Which isn't all that useful to debug as we only have the interface name
to go on but can't track it down to a specific flow.
With this change, we now instead get:
[ 58.586597] openvswitch: ovs-system: deferred action limit reached, drop recirc action (recirc_id=0x9e)
Which can now be correlated with the flow entries from OVS.
Suggested-by: Frode Nordahl <frode.nordahl@canonical.com>
Signed-off-by: Stéphane Graber <stgraber@ubuntu.com>
Tested-by: Stephane Graber <stgraber@ubuntu.com>
Acked-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://lore.kernel.org/r/20220330194244.3476544-1-stgraber@ubuntu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2022-03-31
The first patch is by Oliver Hartkopp and fixes MSG_PEEK feature in
the CAN ISOTP protocol (broken in net-next for v5.18 only).
Tom Rix's patch for the mcp251xfd driver fixes the propagation of an
error value in case of an error.
A patch by me for the m_can driver fixes a use-after-free in the xmit
handler for m_can IP cores v3.0.x.
Hangyu Hua contributes 3 patches fixing the same double free in the
error path of the xmit handler in the ems_usb, usb_8dev and mcba_usb
USB CAN driver.
Pavel Skripkin contributes a patch for the mcba_usb driver to properly
check the endpoint type.
The last patch is by me and fixes a mem leak in the gs_usb, which was
introduced in net-next for v5.18.
* tag 'linux-can-fixes-for-5.18-20220331' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: gs_usb: gs_make_candev(): fix memory leak for devices with extended bit timing configuration
can: mcba_usb: properly check endpoint type
can: mcba_usb: mcba_usb_start_xmit(): fix double dev_kfree_skb in error path
can: usb_8dev: usb_8dev_start_xmit(): fix double dev_kfree_skb() in error path
can: ems_usb: ems_usb_start_xmit(): fix double dev_kfree_skb() in error path
can: m_can: m_can_tx_handler(): fix use after free of skb
can: mcp251xfd: mcp251xfd_register_get_dev_id(): fix return of error value
can: isotp: restore accidentally removed MSG_PEEK feature
====================
Link: https://lore.kernel.org/r/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some function calls are not implemented in rxrpc_no_security, there are
preparse_server_key, free_preparse_server_key and destroy_server_key.
When rxrpc security type is rxrpc_no_security, user can easily trigger a
null-ptr-deref bug via ioctl. So judgment should be added to prevent it
The crash log:
user@syzkaller:~$ ./rxrpc_preparse_s
[ 37.956878][T15626] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 37.957645][T15626] #PF: supervisor instruction fetch in kernel mode
[ 37.958229][T15626] #PF: error_code(0x0010) - not-present page
[ 37.958762][T15626] PGD 4aadf067 P4D 4aadf067 PUD 4aade067 PMD 0
[ 37.959321][T15626] Oops: 0010 [#1] PREEMPT SMP
[ 37.959739][T15626] CPU: 0 PID: 15626 Comm: rxrpc_preparse_ Not tainted 5.17.0-01442-gb47d5a4f6b8d #43
[ 37.960588][T15626] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014
[ 37.961474][T15626] RIP: 0010:0x0
[ 37.961787][T15626] Code: Unable to access opcode bytes at RIP 0xffffffffffffffd6.
[ 37.962480][T15626] RSP: 0018:ffffc9000d9abdc0 EFLAGS: 00010286
[ 37.963018][T15626] RAX: ffffffff84335200 RBX: ffff888012a1ce80 RCX: 0000000000000000
[ 37.963727][T15626] RDX: 0000000000000000 RSI: ffffffff84a736dc RDI: ffffc9000d9abe48
[ 37.964425][T15626] RBP: ffffc9000d9abe48 R08: 0000000000000000 R09: 0000000000000002
[ 37.965118][T15626] R10: 000000000000000a R11: f000000000000000 R12: ffff888013145680
[ 37.965836][T15626] R13: 0000000000000000 R14: ffffffffffffffec R15: ffff8880432aba80
[ 37.966441][T15626] FS: 00007f2177907700(0000) GS:ffff88803ec00000(0000) knlGS:0000000000000000
[ 37.966979][T15626] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 37.967384][T15626] CR2: ffffffffffffffd6 CR3: 000000004aaf1000 CR4: 00000000000006f0
[ 37.967864][T15626] Call Trace:
[ 37.968062][T15626] <TASK>
[ 37.968240][T15626] rxrpc_preparse_s+0x59/0x90
[ 37.968541][T15626] key_create_or_update+0x174/0x510
[ 37.968863][T15626] __x64_sys_add_key+0x139/0x1d0
[ 37.969165][T15626] do_syscall_64+0x35/0xb0
[ 37.969451][T15626] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 37.969824][T15626] RIP: 0033:0x43a1f9
Signed-off-by: Xiaolong Huang <butterflyhuangxx@gmail.com>
Tested-by: Xiaolong Huang <butterflyhuangxx@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: http://lists.infradead.org/pipermail/linux-afs/2022-March/005069.html
Fixes: 12da59fcab5a ("rxrpc: Hand server key parsing off to the security class")
Link: https://lore.kernel.org/r/164865013439.2941502.8966285221215590921.stgit@warthog.procyon.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The rxrpc_call struct has a timer used to handle various timed events
relating to a call. This timer can get started from the packet input
routines that are run in softirq mode with just the RCU read lock held.
Unfortunately, because only the RCU read lock is held - and neither ref or
other lock is taken - the call can start getting destroyed at the same time
a packet comes in addressed to that call. This causes the timer - which
was already stopped - to get restarted. Later, the timer dispatch code may
then oops if the timer got deallocated first.
Fix this by trying to take a ref on the rxrpc_call struct and, if
successful, passing that ref along to the timer. If the timer was already
running, the ref is discarded.
The timer completion routine can then pass the ref along to the call's work
item when it queues it. If the timer or work item where already
queued/running, the extra ref is discarded.
Fixes: a158bdd3247b ("rxrpc: Fix call timeouts")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: http://lists.infradead.org/pipermail/linux-afs/2022-March/005073.html
Link: https://lore.kernel.org/r/164865115696.2943015.11097991776647323586.stgit@warthog.procyon.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Guangbin Huang says:
====================
net: hns3: add two fixes for -net
This series adds two fixes for the HNS3 ethernet driver.
====================
Link: https://lore.kernel.org/r/20220330134506.36635-1-huangguangbin2@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
When user delete vlan 0, as driver will not delete vlan 0 for hardware in
function hclge_set_vlan_filter_hw(), so vlan 0 in software vlan talbe should
not be deleted.
Fixes: fe4144d47eef ("net: hns3: sync VLAN filter entries when kill VLAN ID failed")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently, the debugfs mechanism is that all functions share a
global variable to save the pointer for obtaining data. When
different functions concurrently access the same file node,
repeated release exceptions occur. Therefore, the granularity
of the pointer for storing the obtained data is adjusted to be
private for each function.
Fixes: 5e69ea7ee2a6 ("net: hns3: refactor the debugfs process")
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Jakub Kicinski says:
====================
docs: update and move the netdev-FAQ
A section of documentation for tree-specific process quirks had
been created a while back. There's only one tree in it, so far,
the tip tree, but the contents seem to answer similar questions
as we answer in the netdev-FAQ. Move the netdev-FAQ.
Take this opportunity to touch up and update a few sections.
v3: remove some confrontational? language from patch 7
v2: remove non-git in patch 3
add patch 5
====================
Link: https://lore.kernel.org/r/20220330042505.2902770-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The documentation for the tip tree is really in quite a similar
spirit to the netdev-FAQ. Move the netdev-FAQ to the process docs
as well.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Convert the "should I use new or old comment formatting" to cover
all formatting. This makes the question itself shorter.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add the most important case to the question about "where are we
in the cycle" - the case of net-next being closed.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
I think double back ticks are more correct. Add where they are missing.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
These days we often ask for selftests so let's update our
testing requirements.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
We have to tell people to stop reposting to often lately,
or not to repost while the discussion is ongoing.
Document this.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Make the question shorter and adjust the start of the answer accordingly.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The semantics of "Under review" have shifted. Reword the question
about it a bit and focus it on the response time.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Cut down the length of the question so it renders better in docs.
Mention that Message-ID can be used to search patchwork.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Document that RFCs are allowed during the merge window.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Use the sphinx Warning box to make the net-next being closed
stand out more.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
We want people to mark their patches with net and net-next in the subject.
Many miss doing that. Move the FAQ section which points that out up, and
place it after the section which enumerates the trees, that seems like
a pretty logical place for it. Since the two sections are together we
can remove a little bit (not too much) of the repetition.
v2: also remove the text for non-git setups, we want people to use git.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
that -> those
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Most people use (or should use) lore at this point.
Replace the pointers to older archiving systems.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
timing configuration
Some CAN-FD capable devices offer extended bit timing information for
the data bit timing. The information must be read with an USB control
message. The memory for this message is allocated but not free()ed (in
the non error case). This patch adds the missing free.
Fixes: 6679f4c5e5a6 ("can: gs_usb: add extended bt_const feature")
Link: https://lore.kernel.org/all/20220329193450.659726-1-mkl@pengutronix.de
Reported-by: syzbot+4d0ae90a195b269f102d@syzkaller.appspotmail.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Syzbot reported warning in usb_submit_urb() which is caused by wrong
endpoint type. We should check that in endpoint is actually present to
prevent this warning.
Found pipes are now saved to struct mcba_priv and code uses them
directly instead of making pipes in place.
Fail log:
| usb 5-1: BOGUS urb xfer, pipe 3 != type 1
| WARNING: CPU: 1 PID: 49 at drivers/usb/core/urb.c:502 usb_submit_urb+0xed2/0x18a0 drivers/usb/core/urb.c:502
| Modules linked in:
| CPU: 1 PID: 49 Comm: kworker/1:2 Not tainted 5.17.0-rc6-syzkaller-00184-g38f80f42147f #0
| Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014
| Workqueue: usb_hub_wq hub_event
| RIP: 0010:usb_submit_urb+0xed2/0x18a0 drivers/usb/core/urb.c:502
| ...
| Call Trace:
| <TASK>
| mcba_usb_start drivers/net/can/usb/mcba_usb.c:662 [inline]
| mcba_usb_probe+0x8a3/0xc50 drivers/net/can/usb/mcba_usb.c:858
| usb_probe_interface+0x315/0x7f0 drivers/usb/core/driver.c:396
| call_driver_probe drivers/base/dd.c:517 [inline]
Fixes: 51f3baad7de9 ("can: mcba_usb: Add support for Microchip CAN BUS Analyzer")
Link: https://lore.kernel.org/all/20220313100903.10868-1-paskripkin@gmail.com
Reported-and-tested-by: syzbot+3bc1dce0cc0052d60fde@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
There is no need to call dev_kfree_skb() when usb_submit_urb() fails
because can_put_echo_skb() deletes original skb and
can_free_echo_skb() deletes the cloned skb.
Fixes: 51f3baad7de9 ("can: mcba_usb: Add support for Microchip CAN BUS Analyzer")
Link: https://lore.kernel.org/all/20220311080208.45047-1-hbh25y@gmail.com
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
There is no need to call dev_kfree_skb() when usb_submit_urb() fails
because can_put_echo_skb() deletes original skb and
can_free_echo_skb() deletes the cloned skb.
Fixes: 0024d8ad1639 ("can: usb_8dev: Add support for USB2CAN interface from 8 devices")
Link: https://lore.kernel.org/all/20220311080614.45229-1-hbh25y@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
There is no need to call dev_kfree_skb() when usb_submit_urb() fails
beacause can_put_echo_skb() deletes the original skb and
can_free_echo_skb() deletes the cloned skb.
Link: https://lore.kernel.org/all/20220228083639.38183-1-hbh25y@gmail.com
Fixes: 702171adeed3 ("ems_usb: Added support for EMS CPC-USB/ARM7 CAN/USB interface")
Cc: stable@vger.kernel.org
Cc: Sebastian Haas <haas@ems-wuensche.com>
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
can_put_echo_skb() will clone skb then free the skb. Move the
can_put_echo_skb() for the m_can version 3.0.x directly before the
start of the xmit in hardware, similar to the 3.1.x branch.
Fixes: 80646733f11c ("can: m_can: update to support CAN FD features")
Link: https://lore.kernel.org/all/20220317081305.739554-1-mkl@pengutronix.de
Cc: stable@vger.kernel.org
Reported-by: Hangyu Hua <hbh25y@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
