summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2010-03-22rps: Fix build with CONFIG_SYSFS enabledTom Herbert1-0/+4
Fix build with CONFIG_SYSFS not enabled. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-22qeth: l3 fix build error in ipv6 addr list handlingFrank Blaschka1-1/+1
Adapt qeth l3 to: commit c2e21293c054817c42eb5fa9c613d2ad51954136 (ipv6: convert addrconf list to hlist) converted lst_next member of inet6_ifaddr struct to a hlist. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-21bridge: cleanup: remove unused assignmentDan Carpenter1-2/+0
We never actually use iph again so this assignment can be removed. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-21can: sja1000: add read/write routines for 8, 16 and 32-bit register accessYegor Yefremov1-4/+38
add routines for 8, 16 and 32-bit access like in drivers/i2c/busses/i2c-pca-platform.c Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-21can: sja1000: allow shared interrupt definitionYegor Yefremov1-1/+1
extend the AND mask, so that IRQF_SHARED flag remains Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-21pktgen node allocationRobert Olsson1-5/+53
Here is patch to manipulate packet node allocation and implicitly how packets are DMA'd etc. The flag NODE_ALLOC enables the function and numa_node_id(); when enabled it can also be explicitly controlled via a new node parameter Tested this with 10 Intel 82599 ports w. TYAN S7025 E5520 CPU's. Was able to TX/DMA ~80 Gbit/s to Ethernet wires. Signed-off-by: Robert Olsson <robert.olsson@its.uu.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-21net: dev_getfirstbyhwtype() optimizationEric Dumazet1-7/+10
Use RCU to avoid RTNL use in dev_getfirstbyhwtype() Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-21net: snmp mib cleanupEric Dumazet4-26/+11
There is no point to align or pad mibs to cache lines, they are per cpu allocated with a 8 bytes alignment anyway. This wastes space for no gain. This patch removes __SNMP_MIB_ALIGN__ Since SNMP mibs contain "unsigned long" fields only, we can relax the allocation alignment from "unsigned long long" to "unsigned long" Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-21atm: Use kasprintfEric Dumazet1-9/+1
Use kasprintf in atm_proc_dev_register() Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-21net: speedup netdev_set_master()Eric Dumazet1-4/+3
We currently force a synchronize_net() in netdev_set_master() This seems necessary only when a slave had a master and we dismantle it. In the other case ("ifenslave bond0 ethO"), we dont need this long delay. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-21tcp: Add SNMP counter for DEFER_ACCEPTEric Dumazet3-0/+3
Its currently hard to diagnose when ACK frames are dropped because an application set TCP_DEFER_ACCEPT on its listening socket. See http://bugzilla.kernel.org/show_bug.cgi?id=15507 This patch adds a SNMP value, named TCPDeferAcceptDrop netstat -s | grep TCPDeferAcceptDrop TCPDeferAcceptDrop: 0 This counter is incremented every time we drop a pure ACK frame received by a socket in SYN_RECV state because its SYNACK retrans count is lower than defer_accept value. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-21bonding: flush unicast and multicast lists when changing typeJiri Pirko3-2/+10
After the type change, addresses in unicast and multicast lists wouldn't make sense, not to mention possible different lenghts. So flush both lists here. Note "dev_addr_discard" will be very soon replaced by "dev_mc_flush" (once mc_list conversion will be done). Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-21net: rtnetlink: ignore NETDEV_PRE_TYPE_CHANGE in rtnetlink_event()Patrick McHardy2-1/+5
Ignore the new NETDEV_PRE_TYPE_CHANGE event in rtnetlink_event() since there have been no changes userspace needs to be notified of. Also add a comment to the netdev notifier event definitions to remind people to update the exclusion list when adding new event types. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20ipv6: Fix bug in ipv6_chk_same_addr().David S. Miller1-8/+7
hlist_for_each_entry(p...) will not necessarily initialize 'p' to anything if the hlist is empty. GCC notices this and emits a warning. Just return true explicitly when we hit a match, and return false is we fall out of the loop without one. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20ipv6: Reduce timer events for addrconf_verify().YOSHIFUJI Hideaki1-4/+23
This patch reduces timer events while keeping accuracy by rounding our timer and/or batching several address validations in addrconf_verify(). addrconf_verify() is called at earliest timeout among interface addresses' timeouts, but at maximum ADDR_CHECK_FREQUENCY (120 secs). In most cases, all of timeouts of interface addresses are long enough (e.g. several hours or days vs 2 minutes), this timer is usually called every ADDR_CHECK_FREQUENCY, and it is okay to be lazy. (Note this timer could be eliminated if all code paths which modifies variables related to timeouts call us manually, but it is another story.) However, in other least but important cases, we try keeping accuracy. When the real interface address timeout is coming, and the timeout is just before the rounded timeout, we accept some error. When a timeout has been reached, we also try batching other several events in very near future. Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20IPv6: addrconf cleanup addrconf_verifystephen hemminger1-9/+4
The variable regen_advance is only used in the privacy case. Move it to simplify code and eliminate ifdef's Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20addrconf: checkpatch fixesStephen Hemminger1-173/+179
Fix some of the checkpatch complaints. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20IPv6: addrconf cleanupsStephen Hemminger1-23/+28
Some minor stuff, reformat comments and add whitespace for clarity Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20ipv6: convert idev_list to list macrosstephen hemminger4-47/+48
Convert to list macro's for the list of addresses per interface in IPv6. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20ipv6: user better hash for addrconfstephen hemminger1-17/+8
The existing hash function has a couple of issues: * it is hardwired to 16 for IN6_ADDR_HSIZE * limited to 256 and callers using int * use jhash2 rather than some old BSD algorithm No need for random seed since this is local only (based on assigned addresses) table. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20IPv6: convert addrconf hash list to RCUstephen hemminger3-41/+58
Convert from reader/writer lock to RCU and spinlock for addrconf hash list. Adds an additional helper macro for hlist_for_each_entry_continue_rcu to handle the continue case. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20ipv6: convert addrconf list to hliststephen hemminger2-76/+54
Using hash list macros, simplifies code and helps later RCU. This patch includes some initialization that is not strictly necessary, since an empty hlist node/list is all zero; and list is in BSS and node is allocated with kzalloc. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20ipv6: convert temporary address list to list macrosstephen hemminger2-20/+14
Use list macros instead of open coded linked list. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20Merge branch 'master' of ↵David S. Miller37-184/+346
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2010-03-20Merge branch 'vhost' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostDavid S. Miller2-10/+18
2010-03-20netfilter: ctnetlink: fix reliable event delivery if message building failsPablo Neira Ayuso3-4/+6
This patch fixes a bug that allows to lose events when reliable event delivery mode is used, ie. if NETLINK_BROADCAST_SEND_ERROR and NETLINK_RECV_NO_ENOBUFS socket options are set. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20netlink: fix NETLINK_RECV_NO_ENOBUFS in netlink_set_err()Pablo Neira Ayuso2-4/+15
Currently, ENOBUFS errors are reported to the socket via netlink_set_err() even if NETLINK_RECV_NO_ENOBUFS is set. However, that should not happen. This fixes this problem and it changes the prototype of netlink_set_err() to return the number of sockets that have set the NETLINK_RECV_NO_ENOBUFS socket option. This return value is used in the next patch in these bugfix series. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-20NET_DMA: free skbs periodicallySteven J. Magnani1-20/+43
Under NET_DMA, data transfer can grind to a halt when userland issues a large read on a socket with a high RCVLOWAT (i.e., 512 KB for both). This appears to be because the NET_DMA design queues up lots of memcpy operations, but doesn't issue or wait for them (and thus free the associated skbs) until it is time for tcp_recvmesg() to return. The socket hangs when its TCP window goes to zero before enough data is available to satisfy the read. Periodically issue asynchronous memcpy operations, and free skbs for ones that have completed, to prevent sockets from going into zero-window mode. Signed-off-by: Steven J. Magnani <steve@digidescorp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-19netlink: fix unaligned access in nla_get_be64()Pablo Neira Ayuso1-1/+5
This patch fixes a unaligned access in nla_get_be64() that was introduced by myself in a17c859849402315613a0015ac8fbf101acf0cc1. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-19tcp: Fix tcp_mark_head_lost() with packets == 0Lennart Schulte1-0/+3
A packet is marked as lost in case packets == 0, although nothing should be done. This results in a too early retransmitted packet during recovery in some cases. This small patch fixes this issue by returning immediately. Signed-off-by: Lennart Schulte <lennart.schulte@nets.rwth-aachen.de> Signed-off-by: Arnd Hannemann <hannemann@nets.rwth-aachen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-19net: ipmr/ip6mr: fix potential out-of-bounds vif_table accessPatrick McHardy2-0/+6
mfc_parent of cache entries is used to index into the vif_table and is initialised from mfcctl->mfcc_parent. This can take values of to 2^16-1, while the vif_table has only MAXVIFS (32) entries. The same problem affects ip6mr. Refuse invalid values to fix a potential out-of-bounds access. Unlike the other validity checks, this is checked in ipmr_mfc_add() instead of the setsockopt handler since its unused in the delete path and might be uninitialized. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-19KS8695: update ksp->next_rx_desc_read at the end of rx loopYegor Yefremov1-15/+9
There is no need to adjust the next rx descriptor after each packet, so do it only once at the end of the routine. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
2010-03-19igb: Add support for 82576 ET2 Quad Port Server AdapterCarolyn Wyborny3-0/+3
Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-19ixgbevf: Message formatting cleanupsGreg Rose1-2/+2
Clean up some text output formatting. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-19ixgbevf: Shorten up delay timer for watchdog taskGreg Rose1-1/+1
The recovery from PF reset works better when you shorten up the delay until the watchdog task executes. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-19ixgbevf: Fix VF Stats accounting after resetGreg Rose3-38/+78
The counters in the 82599 Virtual Function are not clear on read. They accumulate to the maximum value and then roll over. They are also not cleared when the VF executes a soft reset, so it is possible they are non-zero when the driver loads and starts. This has all been accounted for in the code that keeps the stats up to date but there is one case that is not. When the PF driver is reset the counters in the VF are all reset to zero. This adds an additional accounting overhead into the VF driver when the PF is reset under its feet. This patch adds additional counters that are used by the VF driver to accumulate and save stats after a PF reset has been detected. Prior to this patch displaying the stats in the VF after the PF has reset would show bogus data. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-19ixgbe: Set IXGBE_RSC_CB(skb)->DMA field to zero after unmapping the addressMallikarjuna R Chilakala1-2/+6
As per Simon Horman's feedback set IXGBE_RSC_CB(skb)->dma to zero after unmapping HWRSC DMA address to avoid double freeing. Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-19ixgbe: fix for real_num_tx_queues update issueVasu Dev1-3/+3
Currently netdev_features_change is called before fcoe tx queues setup is done, so this patch moves calling of netdev_features_change after tx queues setup is done in ixgbe_init_interrupt_scheme, so that real_num_tx_queues is updated correctly on each fcoe enable or disable. This allows additional fcoe queues updated correctly in vlan driver for their correct queue selection. Signed-off-by: Vasu Dev <vasu.dev@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-19TCP: check min TTL on received ICMP packetsstephen hemminger1-0/+5
This adds RFC5082 checks for TTL on received ICMP packets. It adds some security against spoofed ICMP packets disrupting GTSM protected sessions. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-19ipv6: Remove redundant dst NULL check in ip6_dst_checkHerbert Xu1-1/+1
As the only path leading to ip6_dst_check makes an indirect call through dst->ops, dst cannot be NULL in ip6_dst_check. This patch removes this check in case it misleads people who come across this code. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-19ipv4: check rt_genid in dst_checkTimo Teräs1-4/+10
Xfrm_dst keeps a reference to ipv4 rtable entries on each cached bundle. The only way to renew xfrm_dst when the underlying route has changed, is to implement dst_check for this. This is what ipv6 side does too. The problems started after 87c1e12b5eeb7b30b4b41291bef8e0b41fc3dde9 ("ipsec: Fix bogus bundle flowi") which fixed a bug causing xfrm_dst to not get reused, until that all lookups always generated new xfrm_dst with new route reference and path mtu worked. But after the fix, the old routes started to get reused even after they were expired causing pmtu to break (well it would occationally work if the rtable gc had run recently and marked the route obsolete causing dst_check to get called). Signed-off-by: Timo Teras <timo.teras@iki.fi> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-18smsc95xx: Fix tx checksum offload for small packetsSteve Glendinning1-3/+15
TX checksum offload does not work properly when transmitting UDP packets with 0, 1 or 2 bytes of data. This patch works around the problem by calculating checksums for these packets in the driver. Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-18ixgbe: Fix 82599 KX4 Wake on LAN issue after an improper system shutdownMallikarjuna R Chilakala1-3/+0
Advanced Power Management is disabled for 82599 KX4 connections by clearing GRC.APME bit, causing it to not wake the system from an improper system shutdown. By default GRC.APME is enabled and software is not supposed to clear these settings during adapter probe. Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-18ixgbe: Fix 82599 multispeed fiber link issues due to Tx laser flappingMallikarjuna R Chilakala3-36/+54
Fix 82599 link issues during driver load and unload test using multi-speed 10G & 1G fiber modules. When connected back to back sometime 82599 multispeed fiber modules would link at 1G speed instead of 10G highest speed, due to a race condition in autotry process involving Tx laser flapping. Move autotry autoneg-37 tx laser flapping process from multispeed module init setup to driver unload. This will alert the link partner to restart its autotry process when it tries to establish the link with the link partner Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-18enic: Clean up: Change driver description; Fix tab space; Update MAINTAINERSVasanthy Kolluri4-6/+7
1) Change enic driver description to "Cisco VIC Ethernet NIC Driver" 2) Fix tab space 3) Update MAINTAINERS list Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-18enic: Clean up: Add wrapper functionsVasanthy Kolluri2-11/+44
Add wrapper functions vnic_dev_notify_setcmd and vnic_dev_notify_unsetcmd for firmware notify commands. Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-18enic: Do not advertise NETIF_F_HW_VLAN_RXVasanthy Kolluri1-2/+1
Hardware does not honor vlan filters from the host and so the driver does not need to advertise this. Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-18enic: Bug Fix: Fix timeout for hardware Tx and Rx queue disable operationsVasanthy Kolluri2-4/+4
The timeout for hardware Tx and Rx queue disable operations is increased to work-around an erratum for "unnamed" chipset where a DMA completion may take upto 10ms. We have to wait atleast this long for hardware to signal that Tx and Rx queues are quiesced. Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-18enic: Bug Fix: Fix hardware descriptor readsVasanthy Kolluri2-5/+9
The last bit written to a completion descriptor by hardware is the color bit. Driver must read all other descriptor fields only after reading the color bit to avoid reading stale descriptor fields. There is a rmb() after reading the color bit to avoid any compiler/cpu reordering of the reads. The color bit is the generation bit that toggles each pass through the completion descriptor ring. Signed-off-by: Scott Feldman <scofeldm@cisco.com> Signed-off-by: Vasanthy Kolluri <vkolluri@cisco.com> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-03-18Merge branch 'master' of ↵David S. Miller3-22/+4
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-16 22:21:59 +0000