summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2012-07-31perf/trace: Add ability to set a target task for eventsAndrew Vagin11-14/+60
A few events are interesting not only for a current task. For example, sched_stat_* events are interesting for a task which wakes up. For this reason, it will be good if such events will be delivered to a target task too. Now a target task can be set by using __perf_task(). The original idea and a draft patch belongs to Peter Zijlstra. I need these events for profiling sleep times. sched_switch is used for getting callchains and sched_stat_* is used for getting time periods. These events are combined in user space, then it can be analyzed by perf tools. Inspired-by: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arun Sharma <asharma@fb.com> Signed-off-by: Andrew Vagin <avagin@openvz.org> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1342016098-213063-1-git-send-email-avagin@openvz.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-07-31perf/x86: Fix USER/KERNEL tagging of samples properlyPeter Zijlstra5-17/+114
Some PMUs don't provide a full register set for their sample, specifically 'advanced' PMUs like AMD IBS and Intel PEBS which provide 'better' than regular interrupt accuracy. In this case we use the interrupt regs as basis and over-write some fields (typically IP) with different information. The perf core however uses user_mode() to distinguish user/kernel samples, user_mode() relies on regs->cs. If the interrupt skid pushed us over a boundary the new IP might not be in the same domain as the interrupt. Commit ce5c1fe9a9e ("perf/x86: Fix USER/KERNEL tagging of samples") tried to fix this by making the perf core use kernel_ip(). This however is wrong (TM), as pointed out by Linus, since it doesn't allow for VM86 and non-zero based segments in IA32 mode. Therefore, provide a new helper to set the regs->ip field, set_linear_ip(), which massages the regs into a suitable state assuming the provided IP is in fact a linear address. Also modify perf_instruction_pointer() and perf_callchain_user() to deal with segments base offsets. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1341910954.3462.102.camel@twins Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-07-31perf/x86/intel/uncore: Make UNCORE_PMU_HRTIMER_INTERVAL 64-bitAndrew Morton1-1/+1
i386 allmodconfig: arch/x86/kernel/cpu/perf_event_intel_uncore.c: In function 'uncore_pmu_hrtimer': arch/x86/kernel/cpu/perf_event_intel_uncore.c:728: warning: integer overflow in expression arch/x86/kernel/cpu/perf_event_intel_uncore.c: In function 'uncore_pmu_start_hrtimer': arch/x86/kernel/cpu/perf_event_intel_uncore.c:735: warning: integer overflow in expression Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Zheng Yan <zheng.z.yan@intel.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-h84qlqj02zrojmxxybzmy9hi@git.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-07-30uprobes: __replace_page() needs munlock_vma_page()Oleg Nesterov1-2/+6
Like do_wp_page(), __replace_page() should do munlock_vma_page() for the case when the old page still has other !VM_LOCKED mappings. Unfortunately this needs mm/internal.h. Also, move put_page() outside of ptl lock. This doesn't really matter but looks a bit better. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar.vnet.ibm.com> Cc: Anton Arapov <anton@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20120729182249.GA20372@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-07-30uprobes: Rename vma_address() and make it return "unsigned long"Oleg Nesterov1-10/+5
1. vma_address() returns loff_t, this looks confusing and this is unnecessary after the previous change. Make it return "ulong", all callers truncate the result anyway. 2. Its name conflicts with mm/rmap.c:vma_address(), rename it to offset_to_vaddr(), this matches vaddr_to_offset(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar.vnet.ibm.com> Cc: Anton Arapov <anton@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20120729182247.GA20365@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-07-30uprobes: Fix register_for_each_vma()->vma_address() checkOleg Nesterov1-4/+5
1. register_for_each_vma() checks that vma_address() == vaddr, but this is not enough. We should also ensure that vaddr >= vm_start, find_vma() guarantees "vaddr < vm_end" only. 2. After the prevous changes, register_for_each_vma() is the only reason why vma_address() has to return loff_t, all other users know that we have the valid mapping at this offset and thus the overflow is not possible. Change the code to use vaddr_to_offset() instead, imho this looks more clean/understandable and now we can change vma_address(). 3. While at it, remove the unnecessary type-cast. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar.vnet.ibm.com> Cc: Anton Arapov <anton@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20120729182244.GA20362@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-07-30uprobes: Introduce vaddr_to_offset(vma, vaddr)Oleg Nesterov1-6/+8
Add the new helper, vaddr_to_offset(vma, vaddr) which returns the offset in vma->vm_file this vaddr is mapped at. Change build_probe_list() and find_active_uprobe() to use the new helper, the next patch adds another user. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar.vnet.ibm.com> Cc: Anton Arapov <anton@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20120729182242.GA20355@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-07-30uprobes: Teach build_probe_list() to consider the rangeOleg Nesterov1-53/+50
Currently build_probe_list() builds the list of all uprobes attached to the given inode, and the caller should filter out those who don't fall into the [start,end) range, this is sub-optimal. This patch turns find_least_offset_node() into find_node_in_range() which returns the first node inside the [min,max] range, and changes build_probe_list() to use this node as a starting point for rb_prev() and rb_next() to find all other nodes the caller needs. The resulting list is no longer sorted but we do not care. This can speed up both build_probe_list() and the callers, but there is another reason to introduce find_node_in_range(). It can be used to figure out whether the given vma has uprobes or not, this will be needed soon. While at it, shift INIT_LIST_HEAD(tmp_list) into build_probe_list(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar.vnet.ibm.com> Cc: Anton Arapov <anton@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20120729182240.GA20352@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-07-30uprobes: Remove insert_vm_struct()->uprobe_mmap()Oleg Nesterov1-3/+0
Remove insert_vm_struct()->uprobe_mmap(). It is not needed, nobody except arch/ia64/kernel/perfmon.c uses insert_vm_struct(vma) with vma->vm_file != NULL. And it is wrong. Again, get_user_pages() can not succeed before vma_link(vma) makes is visible to find_vma(). And even if this worked, we must not insert the new bp before this mapping is visible to vma_prio_tree_foreach() for uprobe_unregister(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar.vnet.ibm.com> Cc: Anton Arapov <anton@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20120729182238.GA20349@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-07-30uprobes: Remove copy_vma()->uprobe_mmap()Oleg Nesterov1-3/+0
Remove copy_vma()->uprobe_mmap(new_vma), it is absolutely wrong. This new_vma was just initialized to represent the new unmapped area, [vm_start, vm_end) was returned by get_unmapped_area() in the caller. This means that uprobe_mmap()->get_user_pages() will fail for sure, simply because find_vma() can never succeed. And I verified that sys_mremap()->mremap_to() indeed always fails with the wrong ENOMEM code if [addr, addr+old_len] is probed. And why this uprobe_mmap() was added? I believe the intent was wrong. Note that the caller is going to do move_page_tables(), all registered uprobes are already faulted in, we only change the virtual addresses. NOTE: However, somehow we need to close the race with uprobe_register() which relies on map_info->vaddr. This needs another fix I'll try to do later. Probably we need uprobe_mmap() in move_vma() but we can not do this right now, this can confuse uprobes_state.counter (which I still hope we are going to kill). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar.vnet.ibm.com> Cc: Anton Arapov <anton@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20120729182236.GA20342@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-07-30uprobes: Fix overflow in vma_address()/find_active_uprobe()Oleg Nesterov1-2/+2
vma->vm_pgoff is "unsigned long", it should be promoted to loff_t before the multiplication to avoid the overflow. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar.vnet.ibm.com> Cc: Anton Arapov <anton@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20120729182233.GA20339@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-07-30uprobes: Suppress uprobe_munmap() from mmput()Oleg Nesterov1-0/+3
uprobe_munmap() does get_user_pages() and it is also called from the final mmput()->exit_mmap() path. This slows down exit/mmput() for no reason, and I think it is simply dangerous/wrong to try to fault-in a page into the dying mm. If nothing else, this happens after the last sync_mm_rss(), afaics handle_mm_fault() can change the task->rss_stat and make the subsequent check_mm() unhappy. Change uprobe_munmap() to check mm->mm_users != 0. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar.vnet.ibm.com> Cc: Anton Arapov <anton@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20120729182231.GA20336@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-07-30uprobes: Uprobe_mmap/munmap needs list_for_each_entry_safe()Oleg Nesterov1-4/+4
The bug was introduced by me in 449d0d7c ("uprobes: Simplify the usage of uprobe->pending_list"). Yes, we do not care about uprobe->pending_list after return and nobody can remove the current list entry, but put_uprobe(uprobe) can actually free it and thus we need list_for_each_safe(). Reported-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar.vnet.ibm.com> Cc: Anton Arapov <anton@redhat.com> Link: http://lkml.kernel.org/r/20120729182229.GA20329@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-07-30uprobes: Clean up and document write_opcode()->lock_page(old_page)Oleg Nesterov1-13/+14
The comment above write_opcode()->lock_page(old_page) tells about the race with do_wp_page(). I don't really understand which exactly race it means, but afaics this lock_page() was not enough to close all races with do_wp_page(). Anyway, since: 77fc4af1b59d uprobes: Change register_for_each_vma() to take mm->mmap_sem for writing this code is always called with ->mmap_sem held for writing, so we can forget about do_wp_page(). However, we can't simply remove this lock_page(), and the only (afaics) reason is __replace_page()->try_to_free_swap(). Nothing in write_opcode() needs it, move it into __replace_page() and fix the comment. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar.vnet.ibm.com> Cc: Anton Arapov <anton@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20120729182220.GA20322@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-07-30uprobes: Kill write_opcode()->lock_page(new_page)Oleg Nesterov1-2/+0
write_opcode() does lock_page(new_page) for no reason. Nobody can see this page until __replace_page() exposes it under ptl lock, and we do nothing with this page after pte_unmap_unlock(). If nothing else, the similar code in do_wp_page() doesn't lock the new page for page_add_new_anon_rmap/set_pte_at_notify. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar.vnet.ibm.com> Cc: Anton Arapov <anton@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20120729182218.GA20315@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-07-30uprobes: __replace_page() should not use page_address_in_vma()Oleg Nesterov1-7/+4
page_address_in_vma(old_page) in __replace_page() is ugly and wrong. The caller already knows the correct virtual address, this page was found by get_user_pages(vaddr). However, page_address_in_vma() can actually fail if page->mapping was cleared by __delete_from_page_cache() after get_user_pages() returns. But this means the race with page reclaim, write_opcode() should not fail, it should retry and read this page again. Probably the race with remove_mapping() is not possible due to page_freeze_refs() logic, but afaics at least shmem_writepage()->shmem_delete_from_page_cache() can clear ->mapping. We could change __replace_page() to return -EAGAIN in this case, but it would be better to simply use the caller's vaddr and rely on page_check_address(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar.vnet.ibm.com> Cc: Anton Arapov <anton@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20120729182216.GA20311@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-07-30uprobes: Don't recheck vma/f_mapping in write_opcode()Oleg Nesterov1-18/+1
write_opcode() rechecks valid_vma() and ->f_mapping, this is pointless. The caller, register_for_each_vma() or uprobe_mmap(), has already done these checks under mmap_sem. To clarify, uprobe_mmap() checks valid_vma() only, but we can rely on build_probe_list(vm_file->f_mapping->host). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Srikar Dronamraju <srikar.vnet.ibm.com> Cc: Anton Arapov <anton@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20120729182212.GA20304@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-07-26perf/x86: Fix missing struct before structure nameJovi Zhang1-1/+1
When CONFIG_PERF_EVENTS disabled, there will have a compiliation error, because missing struct before structure name. Signed-off-by: Jovi Zhang <bookjovi@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Jiri Kosina <trivial@kernel.org> Link: http://lkml.kernel.org/r/CACV3sbKF%3DCX%2B2jWEWesfCA6rBoQ3wDM4-5ac9MuBtVbCtMRHdQ@mail.gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-07-26perf/x86: Fix format definition of SNB-EP uncore QPI boxYan, Zheng2-1/+25
The event control register of SNB-EP uncore QPI box has a one bit extension at bit position 21. Reported-by: Stephane Eranian <eranian@google.com> Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1343097850-4348-1-git-send-email-zheng.z.yan@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-07-26perf/x86: Make bitfield unsignedPeter Zijlstra1-1/+1
Fix: arch/x86/kernel/cpu/perf_event.h:377:43: sparse: dubious one-bit signed bitfield Cc: Borislav Petkov <bp@amd64.org> Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-2jxkmktkppkclj1qe6qxd7ah@git.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-07-26perf/x86: Fix LLC-* and node-* events on Intel SandyBridgeYan, Zheng1-6/+86
LLC-* and node-* events require using the OFFCORE_RESPONSE events on SandyBridge, but the hw_cache_extra_regs is left uninitialized. This patch adds the missing extra register configure table for SandyBridge. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1342517275-2875-1-git-send-email-zheng.z.yan@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-07-26perf/x86: Add Intel Nehalem-EX uncore supportYan, Zheng2-129/+1352
The uncore subsystem in Nehalem-EX consists of 7 components (U-Box, C-Box, B-Box, S-Box, R-Box, M-Box and W-Box). This patch is large because the way to program these boxes is diverse. Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/4FF534F1.3030307@intel.com [ Improved the code. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-07-26perf/x86: Fix typo in format definition of uncore PCU filterYan, Zheng1-8/+8
The format definition of uncore PCU filter should be filter_band* instead of filter_brand*. Reported-by: Stephane Eranian <eranian@google.com> Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1343024611-4692-1-git-send-email-zheng.z.yan@intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-07-26sched: Deliver sched_switch events to the current taskAndrew Vagin1-1/+1
Otherwise they can't be filtered for a defined task: perf record -e sched:sched_switch ./foo This command doesn't report any events without this patch. I think it isn't a security concern if someone knows who will be executed next - this can already be observed by polling /proc state. By default perf is disabled for non-root users in any case. I need these events for profiling sleep times. sched_switch is used for getting callchains and sched_stat_* is used for getting time periods. These events are combined in user space, then it can be analyzed by perf tools. Signed-off-by: Andrew Vagin <avagin@openvz.org> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Arun Sharma <asharma@fb.com> Link: http://lkml.kernel.org/r/1342088069-1005148-1-git-send-email-avagin@openvz.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-07-25Merge tag 'perf-core-for-mingo' of ↵Ingo Molnar18-116/+657
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core fixes and improvements from Arnaldo Carvalho de Melo: * libtraceevent build fixes from Namhyung Kim * Prevent overflow when calculating annotation buckets size, from Cody Schafer * Set breakpoint events sample period to 1, just like trace events, from Jovi Zhang * Fix strerror_r usage, from Kirill Shutemov * Fix duplicate function declaration problems with bison 2.6, from Kirill Shutemov * Add DSO caching facility (and perf test entry) to speed up binary file reading, will be used by the DWARF unwind code, from Jiri Olsa * Fix trace event storms by setting PERF_SAMPLE_PERIOD, from Frederic Weisbecker * perf kvm fixes from David Ahern Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-07-25perf annotate: Prevent overflow in size calculationCody Schafer1-1/+12
A large enough symbol size causes an overflow in the size parameter to the histogram allocation, leading to a segfault in symbol__inc_addr_samples later on when this histogram is accessed. In the case of being called via perf-report, this returns back and gracefully ignores the sample, eventually ignoring the chained return value of perf_session_deliver_event in flush_sample_queue. Signed-off-by: Cody Schafer <cody@linux.vnet.ibm.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1342753525-4521-1-git-send-email-cody@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-07-25tools lib traceevent: Ignore TRACEEVENT-CFLAGS fileNamhyung Kim1-0/+1
The TRACEEVENT-CFLAGS file is used to detect any change on compiler flags. Just ignore it. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1341559297-25725-3-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-07-25tools lib traceevent: Detect build environment changesNamhyung Kim1-2/+12
Cross compiling perf requires setting ARCH and CROSS_COMPILE variables, but libtraceevent couldn't detect the changes so it ends up believing no recompiling is required. Thus the linker failed like: LINK perf ../lib/traceevent//libtraceevent.a: member ../lib/traceevent//libtraceevent.a(event-parse.o) in archive is not an object collect2: ld returned 1 exit status make: *** [perf] Error 1 This patch fixes this by adding TRACEEVENT-CFLAGS file like PERF-CFLAGS to track those changes. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1341559297-25725-2-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-07-25perf tools: Fix build error with bison 2.6Kirill A. Shutemov1-0/+3
Bison 2.6 started to generate parse_events_parse() declaration in header. In this case we have redundant redeclaration: util/parse-events.c:29:5: error: redundant redeclaration of ‘parse_events_parse’ [-Werror=redundant-decls] In file included from util/parse-events.c:14:0: util/parse-events-bison.h:99:5: note: previous declaration of ‘parse_events_parse’ was here cc1: all warnings being treated as errors Let's disable -Wredundant-decls for util/parse-events.c since it includes header we can't control. Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20120723210407.GA25186@shutemov.name Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-07-25perf tools: use XSI-complaint version of strerror_r() instead of GNU-specificKirill A. Shutemov2-3/+12
Perf uses GNU-specific version of strerror_r(). The GNU-specific strerror_r() returns a pointer to a string containing the error message. This may be either a pointer to a string that the function stores in buf, or a pointer to some (immutable) static string (in which case buf is unused). In glibc-2.16 GNU version was marked with attribute warn_unused_result. It triggers few warnings in perf: util/target.c: In function ‘perf_target__strerror’: util/target.c:114:13: error: ignoring return value of ‘strerror_r’, declared with attribute warn_unused_result [-Werror=unused-result] ui/browsers/hists.c: In function ‘hist_browser__dump’: ui/browsers/hists.c:981:13: error: ignoring return value of ‘strerror_r’, declared with attribute warn_unused_result [-Werror=unused-result] They are bugs. Let's fix strerror_r() usage. Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name> Acked-by: Ulrich Drepper <drepper@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ulrich Drepper <drepper@gmail.com> Link: http://lkml.kernel.org/r/20120723210654.GA25248@shutemov.name [ committer note: s/assert/BUG_ON/g ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-07-25perf tools: Make the breakpoint events sample period default to 1Jovi Zhang1-0/+1
There have one problem about hw_breakpoint perf event, as watched, the events reported to userspace is not correctly, sometime one trigger bp_event report several events, sometime bp_event cannot go through to user. The root cause is attr->freq is 1 passed to kernel defaultly in bp events, this make kernel calculate event period not as expect, make sample period to 1 will change attr->freq to 0, to fix this problem. This patch is similar with commit f92128 about tracepoint events: perf: Make the trace events sample period default to 1 Signed-off-by: Jovi Zhang <bookjovi@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/CACV3sbLF8taiCq_VYW-sgRJyupeMzg58C7ZXfMe3xZUiH_Mx6w@mail.gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-07-25perf test: Add dso data caching testsJiri Olsa4-0/+159
Adding automated test for DSO data reading. Testing raw/cached reads from different file/cache locations. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Arun Sharma <asharma@fb.com> Cc: Benjamin Redelings <benjamin.redelings@nescent.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Ulrich Drepper <drepper@gmail.com> Link: http://lkml.kernel.org/r/1342959280-5361-18-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-07-25perf symbols: Add dso data cachingJiri Olsa2-18/+147
Adding dso data caching so we don't need to open/read/close, each time we want dso data. The DSO data caching affects following functions: dso__data_read_offset dso__data_read_addr Each DSO read tries to find the data (based on offset) inside the cache. If it's not present it fills the cache from file, and returns the data. If it is present, data are returned with no file read. Each data read is cached by reading cache page sized/aligned amount of DSO data. The cache page size is hardcoded to 4096. The cache is using RB tree with file offset as a sort key. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Arun Sharma <asharma@fb.com> Cc: Benjamin Redelings <benjamin.redelings@nescent.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Ulrich Drepper <drepper@gmail.com> Link: http://lkml.kernel.org/r/1342959280-5361-17-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-07-25perf symbols: Add interface to read DSO image dataJiri Olsa2-0/+117
Adding following interface for DSO object to allow reading of DSO image data: dso__data_fd - opens DSO and returns file descriptor Binary types are used to locate/open DSO in following order: DSO_BINARY_TYPE__BUILD_ID_CACHE DSO_BINARY_TYPE__SYSTEM_PATH_DSO In other word we first try to open DSO build-id path, and if that fails we try to open DSO system path. dso__data_read_offset - reads DSO data from specified offset dso__data_read_addr - reads DSO data from specified address/map. Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Arun Sharma <asharma@fb.com> Cc: Benjamin Redelings <benjamin.redelings@nescent.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Ulrich Drepper <drepper@gmail.com> Link: http://lkml.kernel.org/r/1342959280-5361-11-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-07-25perf symbols: Factor DSO symtab types to generic binary typesJiri Olsa4-102/+145
Adding interface to access DSOs so it could be used from another place. New DSO binary type is added - making current SYMTAB__* types more general: DSO_BINARY_TYPE__* = SYMTAB__* Following function is added to return path based on the specified binary type: dso__binary_type_file Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Arun Sharma <asharma@fb.com> Cc: Benjamin Redelings <benjamin.redelings@nescent.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Frank Ch. Eigler <fche@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Robert Richter <robert.richter@amd.com> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Ulrich Drepper <drepper@gmail.com> Link: http://lkml.kernel.org/r/1342959280-5361-10-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-07-25perf hists: Print newline between hists callchainsFrederic Weisbecker1-0/+2
Tiny cosmetic fix. The lack of a newline between hists callchains was looking slightly messy. Before: 0.24% swapper [kernel.kallsyms] [k] _raw_spin_lock_irq | --- _raw_spin_lock_irq run_timer_softirq __do_softirq call_softirq do_softirq irq_exit smp_apic_timer_interrupt apic_timer_interrupt default_idle amd_e400_idle cpu_idle start_secondary 0.10% perf [kernel.kallsyms] [k] lock_is_held | --- lock_is_held __might_sleep mutex_lock_nested perf_event_for_each_child perf_ioctl do_vfs_ioctl sys_ioctl system_call_fastpath ioctl cmd_record run_builtin main __libc_start_main After: 0.24% swapper [kernel.kallsyms] [k] _raw_spin_lock_irq | --- _raw_spin_lock_irq run_timer_softirq __do_softirq call_softirq do_softirq irq_exit smp_apic_timer_interrupt apic_timer_interrupt default_idle amd_e400_idle cpu_idle start_secondary 0.10% perf [kernel.kallsyms] [k] lock_is_held | --- lock_is_held __might_sleep mutex_lock_nested perf_event_for_each_child perf_ioctl do_vfs_ioctl sys_ioctl system_call_fastpath ioctl cmd_record run_builtin main __libc_start_main Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1342631456-7233-3-git-send-email-fweisbec@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-07-25perf tools: Fix trace events storms due to weight demuxFrederic Weisbecker2-1/+2
Trace events have a period (weight) of 1 by default. This can be overriden on events definition by using the __perf_count() macro. For example, the sched_stat_runtime() is weighted with the runtime of the task that fired the event. By default, perf handles such weighted event by dividing it into individual events carrying a weight of 1. For example if sched_stat_runtime is fired and the task has run 5000000 nsecs, perf divides it into 5000000 events in the buffer. This behaviour makes weighted events unusable because they quickly fullfill the buffers and we lose most events. The commit 5d81e5cfb37a174e8ddc0413e2e70cdf05807ace ("events: Don't divide events if it has field period") solves this problem by sending only one event when PERF_SAMPLE_PERIOD flag is set. The weight is carried in the sample itself such that we don't need to demultiplex it anymore. This patch provides the last missing piece to use this feature by setting PERF_SAMPLE_PERIOD from perf tools when we deal with trace events. Before: $ ./perf record -e sched:* -a sleep 1 [ perf record: Woken up 3 times to write data ] [ perf record: Captured and wrote 1.619 MB perf.data (~70749 samples) ] Warning: Processed 16909 events and lost 1 chunks! Check IO/CPU overload! $ ./perf script perf 1894 [003] 824.898327: sched_migrate_task: comm=perf pid=1898 prio=120 orig_cpu=2 dest_cpu=0 perf 1894 [003] 824.898335: sched_stat_sleep: comm=perf pid=1898 delay=113179500 [ns] perf 1894 [003] 824.898336: sched_stat_sleep: comm=perf pid=1898 delay=113179500 [ns] perf 1894 [003] 824.898337: sched_stat_sleep: comm=perf pid=1898 delay=113179500 [ns] perf 1894 [003] 824.898338: sched_stat_sleep: comm=perf pid=1898 delay=113179500 [ns] perf 1894 [003] 824.898339: sched_stat_sleep: comm=perf pid=1898 delay=113179500 [ns] perf 1894 [003] 824.898340: sched_stat_sleep: comm=perf pid=1898 delay=113179500 [ns] perf 1894 [003] 824.898341: sched_stat_sleep: comm=perf pid=1898 delay=113179500 [ns] [...] After: $ ./perf record -e sched:* -a sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.074 MB perf.data (~3228 samples) ] $ ./perf script perf 1461 [000] 554.286957: sched_migrate_task: comm=perf pid=1465 prio=120 orig_cpu=3 dest_cpu=1 perf 1461 [000] 554.286964: sched_stat_sleep: comm=perf pid=1465 delay=133047190 [ns] perf 1461 [000] 554.286967: sched_wakeup: comm=perf pid=1465 prio=120 success=1 target_cpu=001 swapper 0 [001] 554.286976: sched_stat_wait: comm=perf pid=1465 delay=0 [ns] swapper 0 [001] 554.286983: sched_switch: prev_comm=swapper/1 prev_pid=0 prev_prio=120 prev_state=R ==> next_comm=perf [...] Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1342631456-7233-1-git-send-email-fweisbec@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-07-25perf hists: Return correct number of characters printed in callchainFrederic Weisbecker1-2/+3
Include the omitted number of characters printed for the first entry. Not that it really matters because nobody seem to care about the number of printed characters for now. But just in case. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1342631456-7233-2-git-send-email-fweisbec@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-07-25perf tools: Dump exclude_{guest,host}, precise_ip header info tooDavid Ahern1-0/+6
Adds the attributes to the event line in the header dump. From: event : name = cycles, type = 0, config = 0x0, config1 = 0x0, config2 = 0x0, excl_usr = 0, excl_kern = 0, ... to event : name = cycles, type = 0, config = 0x0, config1 = 0x0, config2 = 0x0, excl_usr = 0, excl_kern = 0, excl_host = 0, excl_guest = 0, precise_ip = 0, ... Signed-off-by: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1342826756-64663-8-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-07-25perf kvm: Limit repetitive guestmount message to once per directoryDavid Ahern1-1/+10
After 7ed97ad use of the guestmount option without a subdir for *each* VM generates an error message for each sample related to that VM. Once per VM is enough. Signed-off-by: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1342826756-64663-7-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-07-25perf kvm: Fix bug resolving guest kernel symsDavid Ahern3-0/+15
Guest kernel symbols are not resolved despite passing the information needed to resolve them. e.g., perf kvm --guest --guestmount=/tmp/guest-mount record -a -- sleep 1 perf kvm --guest --guestmount=/tmp/guest-mount report --stdio 36.55% [guest/11399] [unknown] [g] 0xffffffff81600bc8 33.19% [guest/10474] [unknown] [g] 0x00000000c0116e00 30.26% [guest/11094] [unknown] [g] 0xffffffff8100a288 43.69% [guest/10474] [unknown] [g] 0x00000000c0103d90 37.38% [guest/11399] [unknown] [g] 0xffffffff81600bc8 12.24% [guest/11094] [unknown] [g] 0xffffffff810aa91d 6.69% [guest/11094] [unknown] [u] 0x00007fa784d721c3 which is just pathetic. After a maddening 2 days sifting through perf minutia I found it -- id_hdr_size is not initialized for guest machines. This shows up on the report side as random garbage for the cpu and timestamp, e.g., 29816 7310572949125804849 0x1ac0 [0x50]: PERF_RECORD_MMAP ... That messes up the sample sorting such that synthesized guest maps are processed last. With this patch you get a much more helpful report: 12.11% [guest/11399] [guest.kernel.kallsyms.11399] [g] irqtime_account_process_tick 10.58% [guest/11399] [guest.kernel.kallsyms.11399] [g] run_timer_softirq 6.95% [guest/11094] [guest.kernel.kallsyms.11094] [g] printk_needs_cpu 6.50% [guest/11094] [guest.kernel.kallsyms.11094] [g] do_timer 6.45% [guest/11399] [guest.kernel.kallsyms.11399] [g] idle_balance 4.90% [guest/11094] [guest.kernel.kallsyms.11094] [g] native_read_tsc ... v2: - changed rbtree walk to use rb_first per Namhyung's suggestion Tested-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1342826756-64663-5-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-07-25perf kvm: Guest userspace samples should not be lumped with host uspaceDavid Ahern1-1/+3
e.g., perf kvm --host --guest report -i perf.data --stdio -D shows: 1 599127912065356 0x143b8 [0x48]: PERF_RECORD_SAMPLE(IP, 5): 5671/5676: 0x7fdf95a061c0 period: 1 addr: 0 ... chain: nr:2 ..... 0: ffffffffffffff80 ..... 1: fffffffffffffe00 ... thread: qemu-kvm:5671 ...... dso: <not found> (IP, 5) means sample in guest userspace. Those samples should not be lumped into the VMM's host thread. i.e, the report output: 56.86% qemu-kvm [unknown] [u] 0x00007fdf95a061c0 With this patch the output emphasizes it is a guest userspace hit: 56.86% [guest/5671] [unknown] [u] 0x00007fdf95a061c0 Looking at 3 VMs (2 64-bit, 1 32-bit) with each running a CPU bound process (openssl speed), perf report currently shows: 93.84% 117726 qemu-kvm [unknown] [u] 0x00007fd7dcaea8e5 which is wrong. With this patch you get: 31.50% 39258 [guest/18772] [unknown] [u] 0x00007fd7dcaea8e5 31.50% 39236 [guest/11230] [unknown] [u] 0x0000000000a57340 30.84% 39232 [guest/18395] [unknown] [u] 0x00007f66f641e107 Tested-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1342826756-64663-4-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-07-25perf kvm: Set name for VM process in guest machineDavid Ahern1-1/+16
COMM events are not generated in the context of a guest machine, so the thread name is never set for the VMM process. For example, the qemu-kvm name applies to the process in the host machine, not the guest machine. So, samples for guest machines are currently displayed as: 99.67% :5671 [unknown] [g] 0xffffffff81366b41 where 5671 is the pid of the VMM. With this patch the samples in the guest machine are shown as: 18.43% [guest/5671] [unknown] [g] 0xffffffff810d68b7 Tested-by: Jiri Olsa <jolsa@redhat.com> Signed-off-by: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1342826756-64663-3-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-07-23perf symbols: Add machine id to modules debug messageDavid Ahern1-2/+9
Current debug message is: Problems creating module maps, continuing anyway... When running multiple VMs it would be nice to know which machine the message is referring to: $ perf kvm --guest --guestmount=/tmp/guest-mount record -av -- sleep 10 Problems creating module maps for guest 6613, continuing anyway... Signed-off-by: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1342826756-64663-2-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-07-22Merge branch 'x86-build-for-linus' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull a x86/build change from Ingo Molnar. This makes the default stack alignment on x86-64 be just 8, allowing for improved code generation (it can avoid some unnecessary extra alignment logic and use just pure push/pop sequences) and smaller stack frames. We can't generally do SSE with 16-byte alignment issues in the kernel anyway. * 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86-64, gcc: Use -mpreferred-stack-boundary=3 if supported
2012-07-22Merge branch 'x86-uv-for-linus' of ↵Linus Torvalds2-224/+257
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86/uv changes from Ingo Molnar: "UV2 BAU productization fixes. The BAU (Broadcast Assist Unit) is SGI's fancy out of line way on UV hardware to do TLB flushes, instead of the normal APIC IPI methods. The commits here fix / work around hangs in their latest hardware iteration (UV2). My understanding is that the main purpose of the out of line signalling channel is to improve scalability: the UV APIC hardware glue does not handle broadcasting to many CPUs very well, and this matters most for TLB shootdowns. [ I don't agree with all aspects of the current approach: in hindsight it would have been better to link the BAU at the IPI/APIC driver level instead of the TLB shootdown level, where TLB flushes are really just one of the uses of broadcast SMP messages. Doing that would improve scalability in some other ways and it would also remove a few uglies from the TLB path. It would also be nice to push more is_uv_system() tests into proper x86_init or x86_platform callbacks. Cliff? ]" * 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/uv: Work around UV2 BAU hangs x86/uv: Implement UV BAU runtime enable and disable control via /proc/sgi_uv/ x86/uv: Fix the UV BAU destination timeout period
2012-07-22Merge branch 'x86-reboot-for-linus' of ↵Linus Torvalds7-46/+59
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86/reboot changes from Ingo Molnar: "Now that the revampted x86 real-mode trampoline code is upstream and seems to be working well, we can extend the 64-bit reboot code to be as capable as the 32-bit one." * 'x86-reboot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86-64, reboot: Be more paranoid in 64-bit reboot=bios x86, reboot: Drop redundant write of reboot_mode x86-64, reboot: Allow reboot=bios and reboot-cpu override on x86-64
2012-07-22Merge branch 'x86-platform-for-linus' of ↵Linus Torvalds25-581/+429
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 platform changes from Ingo Molnar: "This tree mostly involves various APIC driver cleanups/robustization, and vSMP motivated platform callback improvements/cleanups" Fix up trivial conflict due to printk cleanup right next to return value change. * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (29 commits) Revert "x86/early_printk: Replace obsolete simple_strtoul() usage with kstrtoint()" x86/apic/x2apic: Use multiple cluster members for the irq destination only with the explicit affinity x86/apic/x2apic: Limit the vector reservation to the user specified mask x86/apic: Optimize cpu traversal in __assign_irq_vector() using domain membership x86/vsmp: Fix vector_allocation_domain's return value irq/apic: Use config_enabled(CONFIG_SMP) checks to clean up irq_set_affinity() for UP x86/vsmp: Fix linker error when CONFIG_PROC_FS is not set x86/apic/es7000: Make apicid of a cluster (not CPU) from a cpumask x86/apic/es7000+summit: Always make valid apicid from a cpumask x86/apic/es7000+summit: Fix compile warning in cpu_mask_to_apicid() x86/apic: Fix ugly casting and branching in cpu_mask_to_apicid_and() x86/apic: Eliminate cpu_mask_to_apicid() operation x86/x2apic/cluster: Vector_allocation_domain() should return a value x86/apic/irq_remap: Silence a bogus pr_err() x86/vsmp: Ignore IOAPIC IRQ affinity if possible x86/apic: Make cpu_mask_to_apicid() operations check cpu_online_mask x86/apic: Make cpu_mask_to_apicid() operations return error code x86/apic: Avoid useless scanning thru a cpumask in assign_irq_vector() x86/apic: Try to spread IRQ vectors to different priority levels x86/apic: Factor out default vector_allocation_domain() operation ...
2012-07-22Merge branch 'x86-debug-for-linus' of ↵Linus Torvalds35-316/+363
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull debug-for-linus git tree from Ingo Molnar. Fix up trivial conflict in arch/x86/kernel/cpu/perf_event_intel.c due to a printk() having changed to a pr_info() differently in the two branches. * 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Move call to print_modules() out of show_regs() x86/mm: Mark free_initrd_mem() as __init x86/microcode: Mark microcode_id[] as __initconst x86/nmi: Clean up register_nmi_handler() usage x86: Save cr2 in NMI in case NMIs take a page fault (for i386) x86: Remove cmpxchg from i386 NMI nesting code x86: Save cr2 in NMI in case NMIs take a page fault x86/debug: Add KERN_<LEVEL> to bare printks, convert printks to pr_<level>
2012-07-22Merge branch 'x86-asm-for-linus' of ↵Linus Torvalds6-25/+75
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86/asm changes from Ingo Molnar: "Assorted single-commit improvements, as usual" * 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm/mtrr: Slightly simplify print_mtrr_state() x86/mm/mtrr: Fix alignment determination in range_to_mtrr() x86/copy_user_generic: Optimize copy_user_generic with CPU erms feature x86/alternatives: Use atomic_xchg() instead atomic_dec_and_test() for stop_machine_text_poke()
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-06 12:49:54 +0000