summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2022-12-28Documentation: kvm: clarify SRCU locking orderPaolo Bonzini1-5/+14
Currently only the locking order of SRCU vs kvm->slots_arch_lock and kvm->slots_lock is documented. Extend this to kvm->lock since Xen emulation got it terribly wrong. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-12-28KVM: x86: fix deadlock for KVM_XEN_EVTCHN_RESETPaolo Bonzini2-3/+33
While KVM_XEN_EVTCHN_RESET is usually called with no vCPUs running, if that happened it could cause a deadlock. This is due to kvm_xen_eventfd_reset() doing a synchronize_srcu() inside a kvm->lock critical section. To avoid this, first collect all the evtchnfd objects in an array and free all of them once the kvm->lock critical section is over and th SRCU grace period has expired. Reported-by: Michal Luczaj <mhal@rbox.co> Cc: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-12-27arm64: dts: msm8992-bullhead: add memory hole regionDominik Kobinski1-0/+6
Add region for memory hole present on bullhead in order to fix a reboot issue on recent kernels Reported-by: Petr Vorel <petr.vorel@gmail.com> Signed-off-by: Dominik Kobinski <dominikkobinski314@gmail.com> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Tested-by: Petr Vorel <petr.vorel@gmail.com> Reviewed-by: Petr Vorel <petr.vorel@gmail.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221211100501.82323-1-dominikkobinski314@gmail.com
2022-12-27arm64: dts: qcom: sc8280xp: fix USB-DP PHY nodesJohan Hovold1-54/+23
Update the USB4-USB3-DP QMP PHY nodes to match the new binding which specifically includes the missing register regions (e.g. DP_PHY) and allows for supporting DisplayPort Alternate Mode. Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221121085058.31213-16-johan+linaro@kernel.org
2022-12-27arm64: dts: qcom: sc8280xp: fix primary USB-DP PHY resetJohan Hovold1-1/+1
The vendor kernel is using the GCC_USB4_DP_PHY_PRIM_BCR and GCC_USB4_1_DP_PHY_PRIM_BCR resets for the USB4-USB3-DP QMP PHYs. Update the primary USB-DP PHY node to match. Fixes: 152d1faf1e2f ("arm64: dts: qcom: add SC8280XP platform") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221121085058.31213-15-johan+linaro@kernel.org
2022-12-27uapi:io_uring.h: allow linux/time_types.h to be skippedStefan Metzmacher1-0/+8
include/uapi/linux/io_uring.h is synced 1:1 into liburing:src/include/liburing/io_uring.h. liburing has a configure check to detect the need for linux/time_types.h. It can opt-out by defining UAPI_LINUX_IO_URING_H_SKIP_LINUX_TIME_TYPES_H Fixes: 78a861b94959 ("io_uring: add sync cancelation API through io_uring_register()") Link: https://github.com/axboe/liburing/issues/708 Link: https://github.com/axboe/liburing/pull/709 Link: https://lore.kernel.org/io-uring/20221115212614.1308132-1-ammar.faizi@intel.com/T/#m9f5dd571cd4f6a5dee84452dbbca3b92ba7a4091 CC: Jens Axboe <axboe@kernel.dk> Cc: Ammar Faizi <ammarfaizi2@gnuweeb.org> Signed-off-by: Stefan Metzmacher <metze@samba.org> Reviewed-by: Ammar Faizi <ammarfaizi2@gnuweeb.org> Link: https://lore.kernel.org/r/7071a0a1d751221538b20b63f9160094fc7e06f4.1668630247.git.metze@samba.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-12-27futex: Fix futex_waitv() hrtimer debug object leak on kcalloc errorMathieu Desnoyers1-4/+7
In a scenario where kcalloc() fails to allocate memory, the futex_waitv system call immediately returns -ENOMEM without invoking destroy_hrtimer_on_stack(). When CONFIG_DEBUG_OBJECTS_TIMERS=y, this results in leaking a timer debug object. Fixes: bf69bad38cf6 ("futex: Implement sys_futex_waitv()") Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Davidlohr Bueso <dave@stgolabs.net> Cc: stable@vger.kernel.org Cc: stable@vger.kernel.org # v5.16+ Link: https://lore.kernel.org/r/20221214222008.200393-1-mathieu.desnoyers@efficios.com
2022-12-27x86/kprobes: Fix optprobe optimization check with CONFIG_RETHUNKMasami Hiramatsu (Google)1-20/+8
Since the CONFIG_RETHUNK and CONFIG_SLS will use INT3 for stopping speculative execution after function return, kprobe jump optimization always fails on the functions with such INT3 inside the function body. (It already checks the INT3 padding between functions, but not inside the function) To avoid this issue, as same as kprobes, check whether the INT3 comes from kgdb or not, and if so, stop decoding and make it fail. The other INT3 will come from CONFIG_RETHUNK/CONFIG_SLS and those can be treated as a one-byte instruction. Fixes: e463a09af2f0 ("x86: Add straight-line-speculation mitigation") Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/167146051929.1374301.7419382929328081706.stgit@devnote3
2022-12-27x86/kprobes: Fix kprobes instruction boudary check with CONFIG_RETHUNKMasami Hiramatsu (Google)1-3/+7
Since the CONFIG_RETHUNK and CONFIG_SLS will use INT3 for stopping speculative execution after RET instruction, kprobes always failes to check the probed instruction boundary by decoding the function body if the probed address is after such sequence. (Note that some conditional code blocks will be placed after function return, if compiler decides it is not on the hot path.) This is because kprobes expects kgdb puts the INT3 as a software breakpoint and it will replace the original instruction. But these INT3 are not such purpose, it doesn't need to recover the original instruction. To avoid this issue, kprobes checks whether the INT3 is owned by kgdb or not, and if so, stop decoding and make it fail. The other INT3 will come from CONFIG_RETHUNK/CONFIG_SLS and those can be treated as a one-byte instruction. Fixes: e463a09af2f0 ("x86: Add straight-line-speculation mitigation") Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/167146051026.1374301.392728975473572291.stgit@devnote3
2022-12-27x86/calldepth: Fix incorrect init section referencesArnd Bergmann1-2/+2
The addition of callthunks_translate_call_dest means that skip_addr() and patch_dest() can no longer be discarded as part of the __init section freeing: WARNING: modpost: vmlinux.o: section mismatch in reference: callthunks_translate_call_dest.cold (section: .text.unlikely) -> skip_addr (section: .init.text) WARNING: modpost: vmlinux.o: section mismatch in reference: callthunks_translate_call_dest.cold (section: .text.unlikely) -> patch_dest (section: .init.text) WARNING: modpost: vmlinux.o: section mismatch in reference: is_callthunk.cold (section: .text.unlikely) -> skip_addr (section: .init.text) ERROR: modpost: Section mismatches detected. Set CONFIG_SECTION_MISMATCH_WARN_ONLY=y to allow them. Fixes: b2e9dfe54be4 ("x86/bpf: Emit call depth accounting if required") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20221215164334.968863-1-arnd@kernel.org
2022-12-27perf/core: Call LSM hook after copying perf_event_attrNamhyung Kim1-3/+3
It passes the attr struct to the security_perf_event_open() but it's not initialized yet. Fixes: da97e18458fb ("perf_event: Add support for LSM and SELinux checks") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20221220223140.4020470-1-namhyung@kernel.org
2022-12-27perf: Fix use-after-free in error pathPeter Zijlstra1-1/+3
The syscall error path has a use-after-free; put_pmu_ctx() will reference ctx, therefore we must ensure ctx is destroyed after pmu_ctx is. Fixes: bd2756811766 ("perf: Rewrite core context handling") Reported-by: syzbot+b8e8c01c8ade4fe6e48f@syzkaller.appspotmail.com Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Chengming Zhou <zhouchengming@bytedance.com> Link: https://lkml.kernel.org/r/Y6B3xEgkbmFUCeni@hirez.programming.kicks-ass.net
2022-12-27perf/x86/amd: fix potential integer overflow on shift of a intColin Ian King1-1/+1
The left shift of int 32 bit integer constant 1 is evaluated using 32 bit arithmetic and then passed as a 64 bit function argument. In the case where i is 32 or more this can lead to an overflow. Avoid this by shifting using the BIT_ULL macro instead. Fixes: 471af006a747 ("perf/x86/amd: Constrain Large Increment per Cycle events") Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Ian Rogers <irogers@google.com> Acked-by: Kim Phillips <kim.phillips@amd.com> Link: https://lore.kernel.org/r/20221202135149.1797974-1-colin.i.king@gmail.com
2022-12-27perf/core: Fix cgroup events trackingChengming Zhou1-32/+10
We encounter perf warnings when using cgroup events like: cd /sys/fs/cgroup mkdir test perf stat -e cycles -a -G test Which then triggers: WARNING: CPU: 0 PID: 690 at kernel/events/core.c:849 perf_cgroup_switch+0xb2/0xc0 Call Trace: <TASK> __schedule+0x4ae/0x9f0 ? _raw_spin_unlock_irqrestore+0x23/0x40 ? __cond_resched+0x18/0x20 preempt_schedule_common+0x2d/0x70 __cond_resched+0x18/0x20 wait_for_completion+0x2f/0x160 ? cpu_stop_queue_work+0x9e/0x130 affine_move_task+0x18a/0x4f0 WARNING: CPU: 0 PID: 690 at kernel/events/core.c:829 ctx_sched_in+0x1cf/0x1e0 Call Trace: <TASK> ? ctx_sched_out+0xb7/0x1b0 perf_cgroup_switch+0x88/0xc0 __schedule+0x4ae/0x9f0 ? _raw_spin_unlock_irqrestore+0x23/0x40 ? __cond_resched+0x18/0x20 preempt_schedule_common+0x2d/0x70 __cond_resched+0x18/0x20 wait_for_completion+0x2f/0x160 ? cpu_stop_queue_work+0x9e/0x130 affine_move_task+0x18a/0x4f0 The above two warnings are not complete here since I remove other unimportant information. The problem is caused by the perf cgroup events tracking: CPU0 CPU1 perf_event_open() perf_event_alloc() account_event() account_event_cpu() atomic_inc(perf_cgroup_events) __perf_event_task_sched_out() if (atomic_read(perf_cgroup_events)) perf_cgroup_switch() // kernel/events/core.c:849 WARN_ON_ONCE(cpuctx->ctx.nr_cgroups == 0) if (READ_ONCE(cpuctx->cgrp) == cgrp) // false return perf_ctx_lock() ctx_sched_out() cpuctx->cgrp = cgrp ctx_sched_in() perf_cgroup_set_timestamp() // kernel/events/core.c:829 WARN_ON_ONCE(!ctx->nr_cgroups) perf_ctx_unlock() perf_install_in_context() cpu_function_call() __perf_install_in_context() add_event_to_ctx() list_add_event() perf_cgroup_event_enable() ctx->nr_cgroups++ cpuctx->cgrp = X We can see from above that we wrongly use percpu atomic perf_cgroup_events to check if we need to perf_cgroup_switch(), which should only be used when we know this CPU has cgroup events enabled. The commit bd2756811766 ("perf: Rewrite core context handling") change to have only one context per-CPU, so we can just use cpuctx->cgrp to check if this CPU has cgroup events enabled. So percpu atomic perf_cgroup_events is not needed. Fixes: bd2756811766 ("perf: Rewrite core context handling") Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Ravi Bangoria <ravi.bangoria@amd.com> Link: https://lkml.kernel.org/r/20221207124023.66252-1-zhouchengming@bytedance.com
2022-12-27perf core: Return error pointer if inherit_event() fails to find pmu_ctxRavi Bangoria1-1/+1
inherit_event() returns NULL only when it finds orphaned events otherwise it returns either valid child_event pointer or an error pointer. Follow the same when it fails to find pmu_ctx. Fixes: bd2756811766 ("perf: Rewrite core context handling") Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Ravi Bangoria <ravi.bangoria@amd.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20221118051539.820-1-ravi.bangoria@amd.com
2022-12-27KVM: x86/xen: Documentation updates and clarificationsDavid Woodhouse1-15/+26
Most notably, the KVM_XEN_EVTCHN_RESET feature had escaped documentation entirely. Along with how to turn most stuff off on SHUTDOWN_soft_reset. Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Message-Id: <20221226120320.1125390-6-dwmw2@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-12-27KVM: x86/xen: Add KVM_XEN_INVALID_GPA and KVM_XEN_INVALID_GFN to uapiDavid Woodhouse2-7/+10
These are (uint64_t)-1 magic values are a userspace ABI, allowing the shared info pages and other enlightenments to be disabled. This isn't a Xen ABI because Xen doesn't let the guest turn these off except with the full SHUTDOWN_soft_reset mechanism. Under KVM, the userspace VMM is expected to handle soft reset, and tear down the kernel parts of the enlightenments accordingly. Suggested-by: Sean Christopherson <seanjc@google.com> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Message-Id: <20221226120320.1125390-5-dwmw2@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-12-27KVM: x86/xen: Simplify eventfd IOCTLsMichal Luczaj1-7/+1
Port number is validated in kvm_xen_setattr_evtchn(). Remove superfluous checks in kvm_xen_eventfd_assign() and kvm_xen_eventfd_update(). Signed-off-by: Michal Luczaj <mhal@rbox.co> Message-Id: <20221222203021.1944101-3-mhal@rbox.co> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Message-Id: <20221226120320.1125390-4-dwmw2@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-12-27KVM: x86/xen: Fix SRCU/RCU usage in readers of evtchn_portsPaolo Bonzini1-11/+18
The evtchnfd structure itself must be protected by either kvm->lock or SRCU. Use the former in kvm_xen_eventfd_update(), since the lock is being taken anyway; kvm_xen_hcall_evtchn_send() instead is a reader and does not need kvm->lock, and is called in SRCU critical section from the kvm_x86_handle_exit function. It is also important to use rcu_read_{lock,unlock}() in kvm_xen_hcall_evtchn_send(), because idr_remove() will *not* use synchronize_srcu() to wait for readers to complete. Remove a superfluous if (kvm) check before calling synchronize_srcu() in kvm_xen_eventfd_deassign() where kvm has been dereferenced already. Co-developed-by: Michal Luczaj <mhal@rbox.co> Signed-off-by: Michal Luczaj <mhal@rbox.co> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Message-Id: <20221226120320.1125390-3-dwmw2@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-12-27KVM: x86/xen: Use kvm_read_guest_virt() instead of open-coding it badlyDavid Woodhouse1-38/+18
In particular, we shouldn't assume that being contiguous in guest virtual address space means being contiguous in guest *physical* address space. In dropping the manual calls to kvm_mmu_gva_to_gpa_system(), also drop the srcu_read_lock() that was around them. All call sites are reached from kvm_xen_hypercall() which is called from the handle_exit function with the read lock already held. 536395260 ("KVM: x86/xen: handle PV timers oneshot mode") 1a65105a5 ("KVM: x86/xen: handle PV spinlocks slowpath") Fixes: 2fd6df2f2 ("KVM: x86/xen: intercept EVTCHNOP_send from guests") Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Message-Id: <20221226120320.1125390-2-dwmw2@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-12-27KVM: x86/xen: Fix memory leak in kvm_xen_write_hypercall_page()Michal Luczaj1-3/+4
Release page irrespectively of kvm_vcpu_write_guest() return value. Suggested-by: Paul Durrant <paul@xen.org> Fixes: 23200b7a30de ("KVM: x86/xen: intercept xen hypercalls if enabled") Signed-off-by: Michal Luczaj <mhal@rbox.co> Message-Id: <20221220151454.712165-1-mhal@rbox.co> Reviewed-by: Paul Durrant <paul@xen.org> Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Message-Id: <20221226120320.1125390-1-dwmw2@infradead.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-12-27KVM: Delete extra block of "};" in the KVM API documentationSean Christopherson1-5/+0
Delete an extra block of code/documentation that snuck in when KVM's documentation was converted to ReST format. Fixes: 106ee47dc633 ("docs: kvm: Convert api.txt to ReST format") Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20221207003637.2041211-1-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-12-27kvm: x86/mmu: Remove duplicated "be split" in spte.hLai Jiangshan1-1/+1
"be split be split" -> "be split" Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com> Message-Id: <20221207120505.9175-1-jiangshanlai@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-12-27kvm: Remove the unused macro KVM_MMU_READ_{,UN}LOCK()Lai Jiangshan1-4/+0
No code is using KVM_MMU_READ_LOCK() or KVM_MMU_READ_UNLOCK(). They used to be in virt/kvm/pfncache.c: KVM_MMU_READ_LOCK(kvm); retry = mmu_notifier_retry_hva(kvm, mmu_seq, uhva); KVM_MMU_READ_UNLOCK(kvm); However, since 58cd407ca4c6 ("KVM: Fix multiple races in gfn=>pfn cache refresh", 2022-05-25) the code is only relying on the MMU notifier's invalidation count and sequence number. Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com> Message-Id: <20221207120617.9409-1-jiangshanlai@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-12-27MAINTAINERS: adjust entry after renaming the vmx hyperv filesLukas Bulwahn1-1/+1
Commit a789aeba4196 ("KVM: VMX: Rename "vmx/evmcs.{ch}" to "vmx/hyperv.{ch}"") renames the VMX specific Hyper-V files, but does not adjust the entry in MAINTAINERS. Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a broken reference. Repair this file reference in KVM X86 HYPER-V (KVM/hyper-v). Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Fixes: a789aeba4196 ("KVM: VMX: Rename "vmx/evmcs.{ch}" to "vmx/hyperv.{ch}"") Reviewed-by: Sean Christopherson <seanjc@google.com> Message-Id: <20221205082044.10141-1-lukas.bulwahn@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-12-27KVM: selftests: Mark correct page as mapped in virt_map()Oliver Upton1-2/+2
The loop marks vaddr as mapped after incrementing it by page size, thereby marking the *next* page as mapped. Set the bit in vpages_mapped first instead. Fixes: 56fc7732031d ("KVM: selftests: Fill in vm->vpages_mapped bitmap in virt_map() too") Signed-off-by: Oliver Upton <oliver.upton@linux.dev> Message-Id: <20221209015307.1781352-4-oliver.upton@linux.dev> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-12-27KVM: arm64: selftests: Don't identity map the ucall MMIO holeOliver Upton1-2/+4
Currently the ucall MMIO hole is placed immediately after slot0, which is a relatively safe address in the PA space. However, it is possible that the same address has already been used for something else (like the guest program image) in the VA space. At least in my own testing, building the vgic_irq test with clang leads to the MMIO hole appearing underneath gicv3_ops. Stop identity mapping the MMIO hole and instead find an unused VA to map to it. Yet another subtle detail of the KVM selftests library is that virt_pg_map() does not update vm->vpages_mapped. Switch over to virt_map() instead to guarantee that the chosen VA isn't to something else. Signed-off-by: Oliver Upton <oliver.upton@linux.dev> Message-Id: <20221209015307.1781352-6-oliver.upton@linux.dev> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-12-27KVM: selftests: document the default implementation of vm_vaddr_populate_bitmapPaolo Bonzini1-0/+9
Explain the meaning of the bit manipulations of vm_vaddr_populate_bitmap. These correspond to the "canonical addresses" of x86 and other architectures, but that is not obvious. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-12-27KVM: selftests: Use magic value to signal ucall_alloc() failureSean Christopherson1-2/+14
Use a magic value to signal a ucall_alloc() failure instead of simply doing GUEST_ASSERT(). GUEST_ASSERT() relies on ucall_alloc() and so a failure puts the guest into an infinite loop. Use -1 as the magic value, as a real ucall struct should never wrap. Reported-by: Oliver Upton <oliver.upton@linux.dev> Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-12-27KVM: selftests: Disable "gnu-variable-sized-type-not-at-end" warningSean Christopherson1-0/+1
Disable gnu-variable-sized-type-not-at-end so that tests and libraries can create overlays of variable sized arrays at the end of structs when using a fixed number of entries, e.g. to get/set a single MSR. It's possible to fudge around the warning, e.g. by defining a custom struct that hardcodes the number of entries, but that is a burden for both developers and readers of the code. lib/x86_64/processor.c:664:19: warning: field 'header' with variable sized type 'struct kvm_msrs' not at the end of a struct or class is a GNU extension [-Wgnu-variable-sized-type-not-at-end] struct kvm_msrs header; ^ lib/x86_64/processor.c:772:19: warning: field 'header' with variable sized type 'struct kvm_msrs' not at the end of a struct or class is a GNU extension [-Wgnu-variable-sized-type-not-at-end] struct kvm_msrs header; ^ lib/x86_64/processor.c:787:19: warning: field 'header' with variable sized type 'struct kvm_msrs' not at the end of a struct or class is a GNU extension [-Wgnu-variable-sized-type-not-at-end] struct kvm_msrs header; ^ 3 warnings generated. x86_64/hyperv_tlb_flush.c:54:18: warning: field 'hv_vp_set' with variable sized type 'struct hv_vpset' not at the end of a struct or class is a GNU extension [-Wgnu-variable-sized-type-not-at-end] struct hv_vpset hv_vp_set; ^ 1 warning generated. x86_64/xen_shinfo_test.c:137:25: warning: field 'info' with variable sized type 'struct kvm_irq_routing' not at the end of a struct or class is a GNU extension [-Wgnu-variable-sized-type-not-at-end] struct kvm_irq_routing info; ^ 1 warning generated. Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20221213001653.3852042-12-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-12-27KVM: selftests: Include lib.mk before consuming $(CC)Sean Christopherson1-4/+5
Include lib.mk before consuming $(CC) and document that lib.mk overwrites $(CC) unless make was invoked with -e or $(CC) was specified after make (which makes the environment override the Makefile). Including lib.mk after using it for probing, e.g. for -no-pie, can lead to weirdness. Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20221213001653.3852042-11-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-12-27KVM: selftests: Explicitly disable builtins for mem*() overridesSean Christopherson1-0/+1
Explicitly disable the compiler's builtin memcmp(), memcpy(), and memset(). Because only lib/string_override.c is built with -ffreestanding, the compiler reserves the right to do what it wants and can try to link the non-freestanding code to its own crud. /usr/bin/x86_64-linux-gnu-ld: /lib/x86_64-linux-gnu/libc.a(memcmp.o): in function `memcmp_ifunc': (.text+0x0): multiple definition of `memcmp'; tools/testing/selftests/kvm/lib/string_override.o: tools/testing/selftests/kvm/lib/string_override.c:15: first defined here clang: error: linker command failed with exit code 1 (use -v to see invocation) Fixes: 6b6f71484bf4 ("KVM: selftests: Implement memcmp(), memcpy(), and memset() for guest use") Reported-by: Aaron Lewis <aaronlewis@google.com> Reported-by: Raghavendra Rao Ananta <rananta@google.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20221213001653.3852042-10-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-12-27KVM: selftests: Probe -no-pie with actual CFLAGS used to compileSean Christopherson1-1/+1
Probe -no-pie with the actual set of CFLAGS used to compile the tests, clang whines about -no-pie being unused if the tests are compiled with -static. clang: warning: argument unused during compilation: '-no-pie' [-Wunused-command-line-argument] Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20221213001653.3852042-9-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-12-27KVM: selftests: Use proper function prototypes in probing codeSean Christopherson1-2/+2
Make the main() functions in the probing code proper prototypes so that compiling the probing code with more strict flags won't generate false negatives. <stdin>:1:5: error: function declaration isn’t a prototype [-Werror=strict-prototypes] Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20221213001653.3852042-8-seanjc@google.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-12-27KVM: selftests: Rename UNAME_M to ARCH_DIR, fill explicitly for x86Sean Christopherson1-34/+13
Rename UNAME_M to ARCH_DIR and explicitly set it directly for x86. At this point, the name of the arch directory really doesn't have anything to do with `uname -m`, and UNAME_M is unnecessarily confusing given that its purpose is purely to identify the arch specific directory. Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20221213001653.3852042-7-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-12-27KVM: selftests: Fix a typo in x86-64's kvm_get_cpu_address_width()Sean Christopherson1-1/+1
Fix a == vs. = typo in kvm_get_cpu_address_width() that results in @pa_bits being left unset if the CPU doesn't support enumerating its MAX_PHY_ADDR. Flagged by clang's unusued-value warning. lib/x86_64/processor.c:1034:51: warning: expression result unused [-Wunused-value] *pa_bits == kvm_cpu_has(X86_FEATURE_PAE) ? 36 : 32; Fixes: 3bd396353d18 ("KVM: selftests: Add X86_FEATURE_PAE and use it calc "fallback" MAXPHYADDR") Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20221213001653.3852042-6-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-12-27KVM: selftests: Use pattern matching in .gitignoreSean Christopherson1-85/+6
Use pattern matching to exclude everything except .c, .h, .S, and .sh files from Git. Manually adding every test target has an absurd maintenance cost, is comically error prone, and leads to bikeshedding over whether or not the targets should be listed in alphabetical order. Deliberately do not include the one-off assets, e.g. config, settings, .gitignore itself, etc as Git doesn't ignore files that are already in the repository. Adding the one-off assets won't prevent mistakes where developers forget to --force add files that don't match the "allowed". Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20221213001653.3852042-5-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-12-27KVM: selftests: Fix divide-by-zero bug in memslot_perf_testSean Christopherson1-0/+3
Check that the number of pages per slot is non-zero in get_max_slots() prior to computing the remaining number of pages. clang generates code that uses an actual DIV for calculating the remaining, which causes a #DE if the total number of pages is less than the number of slots. traps: memslot_perf_te[97611] trap divide error ip:4030c4 sp:7ffd18ae58f0 error:0 in memslot_perf_test[401000+cb000] Fixes: a69170c65acd ("KVM: selftests: memslot_perf_test: Report optimal memory slots") Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20221213001653.3852042-4-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-12-27KVM: selftests: Delete dead code in x86_64/vmx_tsc_adjust_test.cSean Christopherson1-5/+0
Delete an unused struct definition in x86_64/vmx_tsc_adjust_test.c. Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20221213001653.3852042-3-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-12-27KVM: selftests: Define literal to asm constraint in aarch64 as unsigned longSean Christopherson1-1/+1
Define a literal '0' asm input constraint to aarch64/page_fault_test's guest_cas() as an unsigned long to make clang happy. tools/testing/selftests/kvm/aarch64/page_fault_test.c:120:16: error: value size does not match register size specified by the constraint and modifier [-Werror,-Wasm-operand-widths] :: "r" (0), "r" (TEST_DATA), "r" (guest_test_memory)); ^ tools/testing/selftests/kvm/aarch64/page_fault_test.c:119:15: note: use constraint modifier "w" "casal %0, %1, [%2]\n" ^~ %w0 Fixes: 35c581015712 ("KVM: selftests: aarch64: Add aarch64/page_fault_test") Cc: Ricardo Koller <ricarkol@google.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20221213001653.3852042-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-12-27memory: mvebu-devbus: Fix missing clk_disable_unprepare in mvebu_devbus_probe()Gaosheng Cui1-2/+1
The clk_disable_unprepare() should be called in the error handling of devbus_get_timing_params() and of_platform_populate(), fix it by replacing devm_clk_get and clk_prepare_enable by devm_clk_get_enabled. Fixes: e81b6abebc87 ("memory: add a driver for atmel ram controllers") Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Link: https://lore.kernel.org/r/20221126044911.7226-1-cuigaosheng1@huawei.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2022-12-27memory: atmel-sdramc: Fix missing clk_disable_unprepare in atmel_ramc_probe()Gaosheng Cui1-4/+2
The clk_disable_unprepare() should be called in the error handling of caps->has_mpddr_clk, fix it by replacing devm_clk_get and clk_prepare_enable by devm_clk_get_enabled. Fixes: e81b6abebc87 ("memory: add a driver for atmel ram controllers") Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Link: https://lore.kernel.org/r/20221125073757.3535219-1-cuigaosheng1@huawei.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2022-12-27memory: tegra: Remove clients SID override programmingAshish Mhetre1-36/+0
On newer Tegra releases, early boot SID override programming and SID override programming during resume is handled by bootloader. In the function tegra186_mc_program_sid() which is getting removed, SID override register of all clients is written without checking if secure firmware has allowed write on it or not. If write is disabled by secure firmware then it can lead to errors coming from secure firmware and hang in kernel boot. Also, SID override is programmed on-demand during probe_finalize() call of IOMMU which is done in tegra186_mc_client_sid_override() in this same file. This function does it correctly by checking if write is permitted on SID override register. It also checks if SID override register is already written with correct value and skips re-writing it in that case. Fixes: 393d66fd2cac ("memory: tegra: Implement SID override programming") Signed-off-by: Ashish Mhetre <amhetre@nvidia.com> Acked-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20221125040752.12627-1-amhetre@nvidia.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2022-12-27memory: omap-gpmc: fix wait pin validationBenedikt Niedermayr1-1/+2
This bug has been introduced after switching from -1 to UINT_MAX for GPMC_WAITPIN_INVALID. The bug leads to an error when the optional gpmc,wait-pin dt-property is not used: ... gpmc_cs_program_settings: invalid wait-pin (-1) ... Signed-off-by: Benedikt Niedermayr <benedikt.niedermayr@siemens.com> Fixes: 8dd7e4af5853 ("memory: omap-gpmc: fix coverity issue "Control flow issues"") Acked-by: Roger Quadros <rogerq@kernel.org> Tested-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20221209112828.581491-1-benedikt.niedermayr@siemens.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
2022-12-27ata: ahci: Fix PCS quirk application for suspendAdam Vodopjan1-9/+23
Since kernel 5.3.4 my laptop (ICH8M controller) does not see Kingston SV300S37A60G SSD disk connected into a SATA connector on wake from suspend. The problem was introduced in c312ef176399 ("libata/ahci: Drop PCS quirk for Denverton and beyond"): the quirk is not applied on wake from suspend as it originally was. It is worth to mention the commit contained another bug: the quirk is not applied at all to controllers which require it. The fix commit 09d6ac8dc51a ("libata/ahci: Fix PCS quirk application") landed in 5.3.8. So testing my patch anywhere between commits c312ef176399 and 09d6ac8dc51a is pointless. Not all disks trigger the problem. For example nothing bad happens with Western Digital WD5000LPCX HDD. Test hardware: - Acer 5920G with ICH8M SATA controller - sda: some SATA HDD connnected into the DVD drive IDE port with a SATA-IDE caddy. It is a boot disk - sdb: Kingston SV300S37A60G SSD connected into the only SATA port Sample "dmesg --notime | grep -E '^(sd |ata)'" output on wake: sd 0:0:0:0: [sda] Starting disk sd 2:0:0:0: [sdb] Starting disk ata4: SATA link down (SStatus 4 SControl 300) ata3: SATA link down (SStatus 4 SControl 300) ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out ata1.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out ata1: FORCE: cable set to 80c ata5: SATA link down (SStatus 0 SControl 300) ata3: SATA link down (SStatus 4 SControl 300) ata3: SATA link down (SStatus 4 SControl 300) ata3.00: disabled sd 2:0:0:0: rejecting I/O to offline device ata3.00: detaching (SCSI 2:0:0:0) sd 2:0:0:0: [sdb] Start/Stop Unit failed: Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK sd 2:0:0:0: [sdb] Synchronizing SCSI cache sd 2:0:0:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK sd 2:0:0:0: [sdb] Stopping disk sd 2:0:0:0: [sdb] Start/Stop Unit failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK Commit c312ef176399 dropped ahci_pci_reset_controller() which internally calls ahci_reset_controller() and applies the PCS quirk if needed after that. It was called each time a reset was required instead of just ahci_reset_controller(). This patch puts the function back in place. Fixes: c312ef176399 ("libata/ahci: Drop PCS quirk for Denverton and beyond") Signed-off-by: Adam Vodopjan <grozzly@protonmail.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
2022-12-26kunit: alloc_string_stream_fragment error handling bug fixYoungJun.park1-1/+3
When it fails to allocate fragment, it does not free and return error. And check the pointer inappropriately. Fixed merge conflicts with commit 618887768bb7 ("kunit: update NULL vs IS_ERR() tests") Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: YoungJun.park <her0gyugyu@gmail.com> Reviewed-by: David Gow <davidgow@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2022-12-26nvme-pci: update sqsize when adjusting the queue depthChristoph Hellwig1-4/+5
Update the core sqsize field in addition to the PCIe-specific q_depth field as the core tagset allocation helpers rely on it. Fixes: 0da7feaa5913 ("nvme-pci: use the tagset alloc/free helpers") Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Hugh Dickins <hughd@google.com> Link: https://lore.kernel.org/r/20221225103234.226794-3-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-12-26nvme: fix setting the queue depth in nvme_alloc_io_tag_setChristoph Hellwig1-1/+1
While the CAP.MQES field in NVMe is a 0s based filed with a natural one off, we also need to account for the queue wrap condition and fix undo the one off again in nvme_alloc_io_tag_set. This was never properly done by the fabrics drivers, but they don't seem to care because there is no actual physical queue that can wrap around, but it became a problem when converting over the PCIe driver. Also add back the BLK_MQ_MAX_DEPTH check that was lost in the same commit. Fixes: 0da7feaa5913 ("nvme-pci: use the tagset alloc/free helpers") Reported-by: Hugh Dickins <hughd@google.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Hugh Dickins <hughd@google.com> Link: https://lore.kernel.org/r/20221225103234.226794-2-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-12-26block, bfq: fix uaf for bfqq in bfq_exit_icq_bfqqYu Kuai1-1/+1
Commit 64dc8c732f5c ("block, bfq: fix possible uaf for 'bfqq->bic'") will access 'bic->bfqq' in bic_set_bfqq(), however, bfq_exit_icq_bfqq() can free bfqq first, and then call bic_set_bfqq(), which will cause uaf. Fix the problem by moving bfq_exit_bfqq() behind bic_set_bfqq(). Fixes: 64dc8c732f5c ("block, bfq: fix possible uaf for 'bfqq->bic'") Reported-by: Yi Zhang <yi.zhang@redhat.com> Signed-off-by: Yu Kuai <yukuai3@huawei.com> Link: https://lore.kernel.org/r/20221226030605.1437081-1-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-12-26ALSA: hda/realtek: Apply dual codec fixup for Dell Latitude laptopsChris Chiu1-0/+13
The Dell Latiture 3340/3440/3540 laptops with Realtek ALC3204 have dual codecs and need the ALC1220_FIXUP_GB_DUAL_CODECS to fix the conflicts of Master controls. The existing headset mic fixup for Dell is also required to enable the jack sense and the headset mic. Introduce a new fixup to fix the dual codec and headset mic issues for particular Dell laptops since other old Dell laptops with the same codec configuration are already well handled by the fixup in alc269_fallback_pin_fixup_tbl[]. Signed-off-by: Chris Chiu <chris.chiu@canonical.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20221226114303.4027500-1-chris.chiu@canonical.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-21 06:54:49 +0000