summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2012-02-22dmaengine: Add flow controller information to dma_slave_configViresh Kumar1-0/+5
Flow controller is programmable for few controllers and there are few intelligent peripherals like, Synopsys JPEG controller, that needs to be a flow controller of DMA transfers on dest side. For this, currently two drivers, pl08x and dw_dmac, support flow controller to be passed from platform to these drivers. Perhaps, this should be a part of struct dma_slave_config. This patch adds another field device_fc to this structure. User drivers must pass this as true if they want to be flow controller of certain transfers. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-02-22dmaengine/dw_dmac: Hibernation support in dw_dmacRajeev KUMAR1-0/+4
The suspend and resume implementation is through dev_pm_ops in dmac. So in order to support hibernation, freeze, thaw, restore and poweroff features are required. Signed-off-by: Rajeev Kumar <rajeev-dlh.kumar@st.com> Acked-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-02-22dmaengine: intel_mid_dma: move pm_runtime_putAdrian Hunter1-1/+1
Move pm_runtime_put() to the end of intel_mid_dma_free_chan_resources() because there is no sense in allowing runtime suspend while the driver is still accessing the device. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-02-22dmaengine: intel_mid_dma: fix error status maskAdrian Hunter1-1/+2
The error status mask (MASK_ERR) has the same format as the other masks (MASK_TFR, MASK_BLOCK etc) and must be cleared the same way. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-02-02i.MX SDMA: Fix burstsize settingsPhilippe Rétornaz1-2/+4
Commit 6584cb88 (ARM i.MX dma: Fix burstsize settings) fixed the mxcmmc driver but forgot to fix the SDMA driver to handle the correct burtsize. This make the SD card access works again with DMA on i.MX31 boards. Signed-off-by: Philippe Rétornaz <philippe.retornaz@epfl.ch> Tested-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-02-01Merge branch 'fixes' into nextVinod Koul3-1/+5
2012-02-01ARM: mach-shmobile: both USB DMAC instances on sh7372 are slave-onlyGuennadi Liakhovetski1-0/+2
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-02-01dma: sh_dma: not all SH DMAC implementations support MEMCPYGuennadi Liakhovetski2-1/+3
Add a flag to allow platforms to specify, whether a DMAC instance supports the MEMCPY operation. To avoid regressions, preserve the current default. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-01-31Merge branch 'fixes' into nextVinod Koul3-12/+11
2012-01-31Merge branch fixes of ↵Vinod Koul1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/dmaengine.git
2012-01-31at_hdmac: bugfix for enabling channel irqNikolaus Voss2-11/+10
commit 463894705e4089d0ff69e7d877312d496ac70e5b deleted redundant chan_id and chancnt initialization in dma drivers as this is done in dma_async_device_register(). However, atc_enable_irq() relied on chan_id set before registering the device, what left only channel 0 functional for this driver. This patch introduces atc_enable/disable_chan_irq() as a variant of atc_enable/disable_irq() with the channel as explicit argument. Signed-off-by: Nikolaus Voss <n.voss@weinmann.de> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-01-31dma/imx-sdma: convernt to use bit opsRichard Zhao1-34/+34
We don't need extra lock, so we use non-atomic bit ops to set/clear bits, merge event_mask0 and event_mask1 into an array, it helps use bit ops. It also fixs the issue: sdmac->event_mask0 = 1 << sdmac->event_id0; sdmac->event_mask1 = 1 << (sdmac->event_id0 - 32); It event_id0 < 32, it shifts negative number. If event_id0 >= 32, it shifts number >= sizeof(int). Both the cases behavior is undefined. Signed-off-by: Richard Zhao <richard.zhao@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-01-31dma/imx-sdma: use num_events to validate event_id0Richard Zhao1-1/+1
event number is not always 32. use num_events for checking instead. Signed-off-by: Richard Zhao <richard.zhao@linaro.org> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-01-31dma/imx-sdma: move clk_enable out of sdma_request_channelRichard Zhao1-2/+3
It makes clk_enable/disable pair more readable, and fix one bug: sdma_init calls sdma_request_channel, but seems don't know sdma_request_channel enabled the clock. Signed-off-by: Richard Zhao <richard.zhao@linaro.org> Acked-by: Shawn Guo <shawn.guo@linaro.org> [fixed typo in commit log] Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-01-31dma/imx-sdma: call sdma_set_channel_priority after sdma_request_channelRichard Zhao1-2/+2
sdma_request_channel sets the default priority. sdma_alloc_chan_resources should call sdma_set_channel_priority thereafter to over write it. Signed-off-by: Richard Zhao <richard.zhao@linaro.org> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-01-31dma/imx-sdma: use readl_relaxed/writel_relaxed and use writel when necessaryRichard Zhao1-22/+22
use readl_relaxed/writel_relaxed in most places, and use writel when enable channel, because it needs memory barrier. Signed-off-by: Richard Zhao <richard.zhao@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-01-31dma/imx-sdma: let sdma_run_channel call sdma_enable_channelRichard Zhao1-6/+6
Let all enable channel code call sdma_enable_channel. Signed-off-by: Richard Zhao <richard.zhao@linaro.org> Acked-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-01-31drivers/dma/amba-pl08x.c: adjust double testJulia Lawall1-1/+1
Rewrite a duplicated test to test the correct value The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression E; @@ ( * E || ... || E | * E && ... && E ) // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-01-31drivers/dma/pl330.c: add missing iounmapJulia Lawall1-6/+11
Add missing iounmap in error handling code, in a case where the function already preforms iounmap on some other execution path. This patch additionally adds calls to clk_disable and clk_put. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e; statement S,S1; int ret; @@ e = \(ioremap\|ioremap_nocache\)(...) ... when != iounmap(e) if (<+...e...+>) S ... when any when != iounmap(e) *if (...) { ... when != iounmap(e) return ...; } ... when any iounmap(e); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-01-30dma: imx-sdma: start transfer in issue_pendingSascha Hauer1-6/+5
The DMA engine API requires that transfers are started in issue_pending instead of tx_submit. Fix this. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> [corrected change log to DMA engine API insteadof DMA API] Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-01-30dma: imx-dma: start transfer in issue_pendingSascha Hauer1-5/+4
The DMA engine API requires that transfers are started in issue_pending instead of tx_submit. Fix this. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> [corrected change log to DMA engine API insteadof DMA API] Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-01-30ASoC: i.MX: Add missing dma_async_issue_pendingSascha Hauer1-0/+1
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-01-30mmc: mxcmmc: add missing dma_async_issue_pendingSascha Hauer1-0/+1
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2012-01-23dmaengine: fix missing 'cnt' in ?: in dmatestDr. David Alan Gilbert1-1/+1
Hi, On the latest tree my compiler has started giving the warning: drivers/dma/dmatest.c:575:28: warning: the omitted middle operand in ?: will always be ?true?, suggest explicit middle operand [-Wparentheses] The following patch fixes the missing middle clause with the same fix that Nicolas Ferre used in the similar clauses. (There seems to have been a race between him fixing that and the extra clause going in a little later). I don't actually know the dmatest code/structures, nor do I own any hardware to test it on (assuming it needs a DMA engine); but this patch builds, the existing code is almost certainly wrong and the fix is the same as the corresponding lines above it. (WTH is x=y?:z legal C anyway?) Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2012-01-19Linux 3.3-rc1v3.3-rc1Linus Torvalds1-2/+2
2012-01-19Merge branches 'sched-urgent-for-linus', 'perf-urgent-for-linus' and ↵Linus Torvalds9-104/+444
'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/accounting, proc: Fix /proc/stat interrupts sum * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tracepoints/module: Fix disabling tracepoints with taint CRAP or OOT x86/kprobes: Add arch/x86/tools/insn_sanity to .gitignore x86/kprobes: Fix typo transferred from Intel manual * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, syscall: Need __ARCH_WANT_SYS_IPC for 32 bits x86, tsc: Fix SMI induced variation in quick_pit_calibrate() x86, opcode: ANDN and Group 17 in x86-opcode-map.txt x86/kconfig: Move the ZONE_DMA entry under a menu x86/UV2: Add accounting for BAU strong nacks x86/UV2: Ack BAU interrupt earlier x86/UV2: Remove stale no-resources test for UV2 BAU x86/UV2: Work around BAU bug x86/UV2: Fix BAU destination timeout initialization x86/UV2: Fix new UV2 hardware by using native UV2 broadcast mode x86: Get rid of dubious one-bit signed bitfield
2012-01-19Merge tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds4-7/+8
gpio bug fixes for v3.3 * tag 'gpio-for-linus' of git://git.secretlab.ca/git/linux-2.6: gpio: tps65910: Use correct offset for gpio initialization gpio/it8761e: Restrict it8761e gpio driver to x86. gpio-ml-ioh: cleanup __iomem annotation usage gpio-ml-ioh: cleanup NULL pointer checking gpio-pch: cleanup __iomem annotation usage gpio-pch: cleanup NULL pointer checking
2012-01-19Merge branch 'for-linus' of ↵Linus Torvalds3-40/+27
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: qnx4: don't leak ->BitMap on late failure exits qnx4: reduce the insane nesting in qnx4_checkroot() qnx4: di_fname is an array, for crying out loud... vfs: remove printk from set_nlink() wake up s_wait_unfrozen when ->freeze_fs fails
2012-01-19x86, syscall: Need __ARCH_WANT_SYS_IPC for 32 bitsH. Peter Anvin1-0/+1
In checkin 303395ac3bf3 x86: Generate system call tables and unistd_*.h from tables the feature macros in <asm/unistd.h> were unified between 32 and 64 bits. Unfortunately 32 bits requires __ARCH_WANT_SYS_IPC and this was inadvertently dropped. Reported-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Link: http://lkml.kernel.org/r/CALLzPKbeXN5gdngo8uYYU8mAow=XhrwBFBhKfG811f37BubQOg@mail.gmail.com
2012-01-19Merge remote-tracking branch 'linus/master' into x86/urgentH. Peter Anvin9587-258975/+463528
2012-01-19Merge branch 'for-linus' of ↵Linus Torvalds4-5/+8
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: KEYS: Permit key_serial() to be called with a const key pointer keys: fix user_defined key sparse messages ima: fix cred sparse warning MPILIB: Add a missing ENOMEM check
2012-01-19qnx4: don't leak ->BitMap on late failure exitsAl Viro1-1/+3
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-19qnx4: reduce the insane nesting in qnx4_checkroot()Al Viro1-34/+22
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-19qnx4: di_fname is an array, for crying out loud...Al Viro1-14/+12
(struct qnx4_inode_entry *)(bh->b_data + some_offset)->di_fname is not going to be NULL, TYVM... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-01-19KEYS: Permit key_serial() to be called with a const key pointerDavid Howells1-1/+1
Permit key_serial() to be called with a const key pointer. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2012-01-19keys: fix user_defined key sparse messagesMimi Zohar1-3/+3
Replace the rcu_assign_pointer() calls with rcu_assign_keypointer(). Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
2012-01-19ima: fix cred sparse warningMimi Zohar1-1/+2
Fix ima_policy.c sparse "warning: dereference of noderef expression" message, by accessing cred->uid using current_cred(). Changelog v1: - Change __cred to just cred (based on David Howell's comment) Signed-off-by: Mimi Zohar <zohar@us.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
2012-01-18uml: fix compile for x86-64Linus Torvalds1-0/+5
Randy Dunlap reports that we get arch/x86/um/shared/sysdep/ptrace.h:7:20: error: redefinition of 'regs_return_value' arch/x86/um/shared/sysdep/ptrace.h:7:20: note: previous definition of 'regs_return_value' was here when compiling UML for x86-64. Stephen Rothwell root-caused it and says: "Caused by commit d7e7528bcd45 ("Audit: push audit success and retcode into arch ptrace.h") (another patch that was never in linux-next :-(). This file now needs protection against double inclusion." so let's do as the man says. Reported-by: Randy Dunlap <rdunlap@xenotime.net> Analyzed-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-19MPILIB: Add a missing ENOMEM checkDavid Howells1-0/+2
Add a missing ENOMEM check. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Mimi Zohar <zohar@us.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
2012-01-18Merge branch 'for-next-merge' of ↵Linus Torvalds7-0/+4672
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending * 'for-next-merge' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: ib_srpt: Initial SRP Target merge for v3.3-rc1
2012-01-18Merge branch 'for-next' of ↵Linus Torvalds51-1014/+829
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (26 commits) target: Set additional sense length field in sense data target: Remove legacy device status check from transport_execute_tasks target: Remove __transport_execute_tasks() for each processing context target: Remove extra se_device->execute_task_lock access in fast path target: Drop se_device TCQ queue_depth usage from I/O path target: Fix possible NULL pointer with __transport_execute_tasks target: Remove TFO->check_release_cmd() fabric API caller tcm_fc: Convert ft_send_work to use target_submit_cmd target: Add target_submit_cmd() for process context fabric submission target: Make target_put_sess_cmd use target_release_cmd_kref target: Set response format in INQUIRY response target: tcm_mod_builder: small fixups Documentation/target: Fix tcm_mod_builder.py build breakage target: remove overagressive ____cacheline_aligned annoations tcm_loop: bump max_sectors target/configs: remove trailing newline from udev_path and alias iscsi-target: fix chap identifier simple_strtoul usage target: remove useless casts target: simplify target_check_cdb_and_preempt target: Move core_scsi3_check_cdb_abort_and_preempt ...
2012-01-18Merge branch 'release' of ↵Linus Torvalds182-795/+4824
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux This includes initial support for the recently published ACPI 5.0 spec. In particular, support for the "hardware-reduced" bit that eliminates the dependency on legacy hardware. APEI has patches resulting from testing on real hardware. Plus other random fixes. * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (52 commits) acpi/apei/einj: Add extensions to EINJ from rev 5.0 of acpi spec intel_idle: Split up and provide per CPU initialization func ACPI processor: Remove unneeded variable passed by acpi_processor_hotadd_init V2 ACPI processor: Remove unneeded cpuidle_unregister_driver call intel idle: Make idle driver more robust intel_idle: Fix a cast to pointer from integer of different size warning in intel_idle ACPI: kernel-parameters.txt : Add intel_idle.max_cstate intel_idle: remove redundant local_irq_disable() call ACPI processor: Fix error path, also remove sysdev link ACPI: processor: fix acpi_get_cpuid for UP processor intel_idle: fix API misuse ACPI APEI: Convert atomicio routines ACPI: Export interfaces for ioremapping/iounmapping ACPI registers ACPI: Fix possible alignment issues with GAS 'address' references ACPI, ia64: Use SRAT table rev to use 8bit or 16/32bit PXM fields (ia64) ACPI, x86: Use SRAT table rev to use 8bit or 32bit PXM fields (x86/x86-64) ACPI: Store SRAT table revision ACPI, APEI, Resolve false conflict between ACPI NVS and APEI ACPI, Record ACPI NVS regions ACPI, APEI, EINJ, Refine the fix of resource conflict ...
2012-01-18tpm: fix (ACPI S3) suspend regressionStefan Berger2-0/+12
This patch fixes an (ACPI S3) suspend regression introduced in commit 68d6e6713fcb ("tpm: Introduce function to poll for result of self test") and occurring with an Infineon TPM and tpm_tis and tpm_infineon drivers active. The suspend problem occurred if the TPM was disabled and/or deactivated and therefore the TPM_PCRRead checking the result of the (asynchronous) self test returned an error code which then caused the tpm_tis driver to become inactive and this then seemed to have negatively influenced the suspend support by the tpm_infineon driver... Besides that the tpm_tis drive may stay active even if the TPM is disabled and/or deactivated. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Tested-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-18nvme: fix merge error due to change of 'make_request_fn' fn typeLinus Torvalds1-7/+1
The type of 'make_request_fn' changed in 5a7bbad27a4 ("block: remove support for bio remapping from ->make_request"), but the merge of the nvme driver didn't take that into account, and as a result the driver would compile with a warning: drivers/block/nvme.c: In function 'nvme_alloc_ns': drivers/block/nvme.c:1336:2: warning: passing argument 2 of 'blk_queue_make_request' from incompatible pointer type [enabled by default] include/linux/blkdev.h:830:13: note: expected 'void (*)(struct request_queue *, struct bio *)' but argument is of type 'int (*)(struct request_queue *, struct bio *)' It's benign, but the warning is annoying. Reported-by: Stephen Rothwell <sfr@canb.auug.org> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-18xen: using EXPORT_SYMBOL requires including export.hStephen Rothwell1-0/+1
Fix these warnings: drivers/xen/biomerge.c:14:1: warning: data definition has no type or storage class [enabled by default] drivers/xen/biomerge.c:14:1: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL' [-Wimplicit-int] drivers/xen/biomerge.c:14:1: warning: parameter names (without types) in function declaration [enabled by default] And this build error: ERROR: "xen_biovec_phys_mergeable" [drivers/block/nvme.ko] undefined! Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-18Merge branch 'for-linus/i2c-33' of git://git.fluff.org/bjdooks/linuxLinus Torvalds4-54/+119
* 'for-linus/i2c-33' of git://git.fluff.org/bjdooks/linux: i2c-eg20t: Change-company-name-OKI-SEMICONDUCTOR to LAPIS Semiconductor i2c-eg20t: Support new device LAPIS Semiconductor ML7831 IOH i2c-eg20t: modified the setting of transfer rate. i2c-eg20t: use i2c_add_numbered_adapter to get a fixed bus number i2c: OMAP: Add DT support for i2c controller I2C: OMAP: NACK without STP I2C: OMAP: correct SYSC register offset for OMAP4
2012-01-18Merge branch 'v4l_for_linus' of ↵Linus Torvalds56-679/+727
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (57 commits) [media] as3645a: Fix compilation by including slab.h [media] s5p-fimc: Remove linux/version.h include from fimc-mdevice.c [media] s5p-mfc: Remove linux/version.h include from s5p_mfc.c [media] ds3000: using logical && instead of bitwise & [media] v4l2-ctrls: make control names consistent [media] DVB: dib0700, add support for Nova-TD LEDs [media] DVB: dib0700, add corrected Nova-TD frontend_attach [media] DVB: dib0700, separate stk7070pd initialization [media] DVB: dib0700, move Nova-TD Stick to a separate set [media] : add MODULE_FIRMWARE to dib0700 [media] DVB-CORE: remove superfluous DTV_CMDs [media] s5p-jpeg: adapt to recent videobuf2 changes [media] s5p-g2d: fixed a bug in controls setting function [media] s5p-mfc: Fix volatile controls setup [media] drivers/media/video/s5p-mfc/s5p_mfc.c: adjust double test [media] drivers/media/video/s5p-fimc/fimc-capture.c: adjust double test [media] s5p-fimc: Fix incorrect control ID assignment [media] dvb_frontend: Don't call get_frontend() if idle [media] DocBook/dvbproperty.xml: Remove DTV_MODULATION from ISDB-T [media] DocBook/dvbproperty.xml: Fix ISDB-T delivery system parameters ...
2012-01-18Merge branch 'fix/asoc' of ↵Linus Torvalds5-7/+19
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound * 'fix/asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ASoC: Wait for WM8993 FLL to stabilise ASoC: core - Free platform DAPM context at platform removal. ASoC: dapm - Fix check for codec context in dapm_power_widgets(). ASoC: sgtl5000: update author email address ASoC: Fix DMA channel leak in imx-pcm-dma-mx2 driver.
2012-01-18gpio: tps65910: Use correct offset for gpio initializationLaxman Dewangan1-1/+1
Using the correct gpio offset for setting the initial value of gpio when setting output direction. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-01-18Merge tag 'scsi-misc' of ↵Linus Torvalds62-1482/+1192
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6 SCSI updates on 20120118 * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (49 commits) [SCSI] libfc: remove redundant timer init for fcp [SCSI] fcoe: Move fcoe_debug_logging from fcoe.h to fcoe.c [SCSI] libfc: Declare local functions static [SCSI] fcoe: fix regression on offload em matching function for initiator/target [SCSI] qla4xxx: Update driver version to 5.02.00-k12 [SCSI] qla4xxx: Cleanup modinfo display [SCSI] qla4xxx: Update license [SCSI] qla4xxx: Clear the RISC interrupt bit during FW init [SCSI] qla4xxx: Added error logging for firmware abort [SCSI] qla4xxx: Disable generating pause frames in case of FW hung [SCSI] qla4xxx: Temperature monitoring for ISP82XX core. [SCSI] megaraid: fix sparse warnings [SCSI] sg: convert to kstrtoul_from_user() [SCSI] don't change sdev starvation list order without request dispatched [SCSI] isci: fix, prevent port from getting stuck in the 'configuring' state [SCSI] isci: fix start OOB [SCSI] isci: fix io failures while wide port links are coming up [SCSI] isci: allow more time for wide port targets [SCSI] isci: enable wide port targets [SCSI] isci: Fix IO fails when pull cable from phy in x4 wideport in MPC mode. ...
generated by cgit v1.2.3 (git 2.39.1) at 2025-01-26 00:28:10 +0000