summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2014-07-13Merge branch 'clk-fixes' into clk-nextMike Turquette1-5/+11
2014-07-13clk: spear3xx: Set proper clock parent of uart1/2Thomas Gleixner1-4/+10
The uarts only work when the parent is ras_ahb_clk. The stale 3.5 based ST tree does this in the board file. Add it to the clk init function. Not pretty, but the mess there is amazing anyway. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-13clk: spear3xx: Use proper control register offsetThomas Gleixner1-1/+1
The control register is at offset 0x10, not 0x0. This is wreckaged since commit 5df33a62c (SPEAr: Switch to common clock framework). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-11ARM: SPEAr13xx: Fix pcie clock namePratyush Anand2-4/+4
Follow dt clock naming convention for PCIe clocks. Signed-off-by: Pratyush Anand <pratyush.anand@st.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> [viresh: fixed logs/cclist] Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-08Merge tag 'tegra-clk-3.17-1' of ↵Mike Turquette5-4/+66
git://nv-tegra.nvidia.com/user/pdeschrijver/linux into clk-next-tegra tegra clk updates for 3.17 including PLLE fixes for xusb
2014-07-08clk: tegra: Use XUSB-compatible SATA PLL sequenceMikko Perttunen1-0/+11
Use a sequence for enabling hardware control of the SATA PLL that works both when using the SATA lane with SATA and when using it with XUSB. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
2014-07-03Merge branch 'clk-fixes' into clk-nextMike Turquette12-63/+82
2014-07-02clk: qcom: HDMI source sel is 3 not 2Stephen Boyd1-1/+1
The HDMI PLL input to the tv mux is supposed to be 3, not 2. Fix the code so that we can properly select the HDMI PLL. Fixes: 6d00b56fe "clk: qcom: Add support for MSM8960's multimedia clock controller (MMCC)" Reported-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-02clk: define and export clk_debugs_add_filePeter De Schrijver2-0/+17
Define and export a new function clk_debugs_add_file which adds a file to a existing clock's debugfs directory. This can be used by clock providers to add debugfs entries which are not related to a specific clock type. Examples include the ability to measure the rate of a clock. It can also be used by modules to create new debugfs entries. This is useful if you want to expose features for testing which can potentially cause system instability such as allowing to change a clock's rate from userspace. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-02Merge tag 'for_3.16/samsung-clk-fixes' of ↵Mike Turquette6-48/+71
git://git.kernel.org/pub/scm/linux/kernel/git/tfiga/samsung-clk into clk-fixes-samsung Samsung clock fixes for v3.16. This pull request contains fixes for various issues found while testing -rc versions of Linux 3.16. Mostly two kinds of patches: * Fixes of incorrectly defined clocks 1) a37c82a clk: samsung: exynos4: Remove SRC_MASK_ISP gates Issue present since v3.10. 2) 0b1643b clk/exynos5250: fix bit number for tv sysmmu clock Issue present since v3.16. 3) 44ff025 clk: exynos5420: Remove aclk66_peric from the clock tree description Issue present since v3.11. * Adding things missed by original patches 1) cec1cde clk: samsung: fix several typos to fix boot on s3c2410 2) 34ece9e clk: samsung: add more aliases for s3c24xx Both issues present since the driver was added in v3.16. 3) a92dda4 clk: s3c64xx: Hookup SPI clocks correctly Issue present since v3.12.
2014-07-02clk: s2mps11: Fix clk_opsKarol Wrona1-22/+11
s2mps11 clocks had registered callbacks for prepare ,unprepare and is_enabled. During disabling unused clocks the lack of is_prepared caused that unused s2mps11 clocks were not unprepared and stayed active. Regmap_read is cached so it can be called in is_prepare callback to achieve this information. Enabled field was removed from struct s2mps11_clk. Signed-off-by: Karol Wrona <k.wrona@samsung.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-02clk: at91: main: warn when the main crystal frequency is not setAlexandre Belloni1-0/+1
When the main crystal frequency is not set, the main clock is approximated using the MAINF value in the CKGR_MCFR register. Warn the user in that case. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris BREZILLON <boris.brezillon@overkiz.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-01Merge branch 'for-v3.16-rc/ti-clk-drv' of github.com:t-kristo/linux-pm into ↵Mike Turquette2-6/+4
clk-fixes-ti
2014-07-01clk: sunxi: fix devm_ioremap_resource error detection codeHimangi Saraogi1-1/+1
devm_ioremap_resource returns an ERR_PTR value, not NULL, on failure. A simplified version of the semantic match that finds this problem is as follows: // <smpl> @@ expression e,e1; statement S; @@ *e = devm_ioremap_resource(...); if (!e1) S // </smpl> Signed-off-by: Himangi Saraogi <himangi774@gmail.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Acked-by Boris BREZILLON <boris.brezillon@free-electrons.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-01clk: s2mps11: Fix double free corruption during driver unbindKrzysztof Kozlowski1-5/+2
After unbinding the driver memory was corrupted by double free of clk_lookup structure. This lead to OOPS when re-binding the driver again. The driver allocated memory for 'clk_lookup' with devm_kzalloc. During driver removal this memory was freed twice: once by clkdev_drop() and second by devm code. Kernel panic log: [ 30.839284] Unable to handle kernel paging request at virtual address 5f343173 [ 30.846476] pgd = dee14000 [ 30.849165] [5f343173] *pgd=00000000 [ 30.852703] Internal error: Oops: 805 [#1] PREEMPT SMP ARM [ 30.858166] Modules linked in: [ 30.861208] CPU: 0 PID: 1 Comm: bash Not tainted 3.16.0-rc2-00239-g94bdf617b07e-dirty #40 [ 30.869364] task: df478000 ti: df480000 task.ti: df480000 [ 30.874752] PC is at clkdev_add+0x2c/0x38 [ 30.878738] LR is at clkdev_add+0x18/0x38 [ 30.882732] pc : [<c0350908>] lr : [<c03508f4>] psr: 60000013 [ 30.882732] sp : df481e78 ip : 00000001 fp : c0700ed8 [ 30.894187] r10: 0000000c r9 : 00000000 r8 : c07b0e3c [ 30.899396] r7 : 00000002 r6 : df45f9d0 r5 : df421390 r4 : c0700d6c [ 30.905906] r3 : 5f343173 r2 : c0700d84 r1 : 60000013 r0 : c0700d6c [ 30.912417] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 30.919534] Control: 10c53c7d Table: 5ee1406a DAC: 00000015 [ 30.925262] Process bash (pid: 1, stack limit = 0xdf480240) [ 30.930817] Stack: (0xdf481e78 to 0xdf482000) [ 30.935159] 1e60: 00001000 df6de610 [ 30.943321] 1e80: df7f4558 c0355650 c05ec6ec c0700eb0 df6de600 df7f4510 dec9d69c 00000014 [ 30.951480] 1ea0: 00167b48 df6de610 c0700e30 c0713518 00000000 c0700e30 dec9d69c 00000006 [ 30.959639] 1ec0: 00167b48 c02c1b7c c02c1b64 df6de610 c07aff48 c02c0420 c06fb150 c047cc20 [ 30.967798] 1ee0: df6de610 df6de610 c0700e30 df6de644 c06fb150 0000000c dec9d690 c02bef90 [ 30.975957] 1f00: dec9c6c0 dece4c00 df481f80 dece4c00 0000000c c02be73c 0000000c c016ca8c [ 30.984116] 1f20: c016ca48 00000000 00000000 c016c1f4 00000000 00000000 b6f18000 df481f80 [ 30.992276] 1f40: df7f66c0 0000000c df480000 df480000 b6f18000 c011094c df47839c 60000013 [ 31.000435] 1f60: 00000000 00000000 df7f66c0 df7f66c0 0000000c df480000 b6f18000 c0110dd4 [ 31.008594] 1f80: 00000000 00000000 0000000c b6ec05d8 0000000c b6f18000 00000004 c000f2a8 [ 31.016753] 1fa0: 00001000 c000f0e0 b6ec05d8 0000000c 00000001 b6f18000 0000000c 00000000 [ 31.024912] 1fc0: b6ec05d8 0000000c b6f18000 00000004 0000000c 00000001 00000000 00167b48 [ 31.033071] 1fe0: 00000000 bed83a80 b6e004f0 b6e5122c 60000010 00000001 ffffffff ffffffff [ 31.041248] [<c0350908>] (clkdev_add) from [<c0355650>] (s2mps11_clk_probe+0x2b4/0x3b4) [ 31.049223] [<c0355650>] (s2mps11_clk_probe) from [<c02c1b7c>] (platform_drv_probe+0x18/0x48) [ 31.057728] [<c02c1b7c>] (platform_drv_probe) from [<c02c0420>] (driver_probe_device+0x13c/0x384) [ 31.066579] [<c02c0420>] (driver_probe_device) from [<c02bef90>] (bind_store+0x88/0xd8) [ 31.074564] [<c02bef90>] (bind_store) from [<c02be73c>] (drv_attr_store+0x20/0x2c) [ 31.082118] [<c02be73c>] (drv_attr_store) from [<c016ca8c>] (sysfs_kf_write+0x44/0x48) [ 31.090016] [<c016ca8c>] (sysfs_kf_write) from [<c016c1f4>] (kernfs_fop_write+0xc0/0x17c) [ 31.098176] [<c016c1f4>] (kernfs_fop_write) from [<c011094c>] (vfs_write+0xa0/0x1c4) [ 31.105899] [<c011094c>] (vfs_write) from [<c0110dd4>] (SyS_write+0x40/0x8c) [ 31.112931] [<c0110dd4>] (SyS_write) from [<c000f0e0>] (ret_fast_syscall+0x0/0x3c) [ 31.120481] Code: e2842018 e584501c e1a00004 e885000c (e5835000) [ 31.126596] ---[ end trace efad45bfa3a61b05 ]--- [ 31.131181] Kernel panic - not syncing: Fatal exception [ 31.136368] CPU1: stopping [ 31.139054] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 3.16.0-rc2-00239-g94bdf617b07e-dirty #40 [ 31.148697] [<c0016480>] (unwind_backtrace) from [<c0012950>] (show_stack+0x10/0x14) [ 31.156419] [<c0012950>] (show_stack) from [<c0480db8>] (dump_stack+0x80/0xcc) [ 31.163622] [<c0480db8>] (dump_stack) from [<c001499c>] (handle_IPI+0x130/0x15c) [ 31.170998] [<c001499c>] (handle_IPI) from [<c000862c>] (gic_handle_irq+0x60/0x68) [ 31.178549] [<c000862c>] (gic_handle_irq) from [<c0013480>] (__irq_svc+0x40/0x70) [ 31.186009] Exception stack(0xdf4bdf88 to 0xdf4bdfd0) [ 31.191046] df80: ffffffed 00000000 00000000 00000000 df4bc000 c06d042c [ 31.199207] dfa0: 00000000 ffffffed c06d03c0 00000000 c070c288 00000000 00000000 df4bdfd0 [ 31.207363] dfc0: c0010324 c0010328 60000013 ffffffff [ 31.212402] [<c0013480>] (__irq_svc) from [<c0010328>] (arch_cpu_idle+0x28/0x30) [ 31.219783] [<c0010328>] (arch_cpu_idle) from [<c005f150>] (cpu_startup_entry+0x2c4/0x3f0) [ 31.228027] [<c005f150>] (cpu_startup_entry) from [<400086c4>] (0x400086c4) [ 31.234968] ---[ end Kernel panic - not syncing: Fatal exception Fixes: 7cc560dea415 ("clk: s2mps11: Add support for s2mps11") Cc: <stable@vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Reviewed-by: Yadwinder Singh Brar <yadi.brar@samsung.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-01clk: Add driver for Palmas clk32kg and clk32kgaudio clocksPeter Ujfalusi3-0/+315
Palmas class of devices can provide 32K clock(s) to be used by other devices on the board. Depending on the actual device the provided clocks can be: CLK32K_KG and CLK32K_KGAUDIO or only one: CLK32K_KG (TPS659039 for example) Use separate compatible flags for the two 32K clock. A system which needs or have only one of the 32k clock from Palmas will need to add node(s) for each clock as separate section in the dts file. The two compatible property is: "ti,palmas-clk32kg" for clk32kg clock "ti,palmas-clk32kgaudio" for clk32kgaudio clock Apart from the register control of the clocks - which is done via the clock API there is a posibility to enable the external sleep control. In this way the clock can be enabled/disabled on demand by the user of the clock. See the documentation for more details. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Nishanth Menon <nm@ti.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-01dt/bindings: Binding documentation for Palmas clk32kg and clk32kgaudio clocksPeter Ujfalusi2-0/+53
Palmas class of devices can provide 32K clock(s) to be used by other devices on the board. Depending on the actual device the provided clocks can be: CLK32K_KG and CLK32K_KGAUDIO or only one: CLK32K_KG (TPS659039 for example) Use separate compatible flags for the two 32K clock. A system which needs or have only one of the 32k clock from Palmas will need to add node(s) for each clock as separate section in the dts file. The two compatible property is: "ti,palmas-clk32kg" for clk32kg clock "ti,palmas-clk32kgaudio" for clk32kgaudio clock Apart from the register control of the clocks - which is done via the clock API there is a posibility to enable the external sleep control. In this way the clock can be enabled/disabled on demand by the user of the clock. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Nishanth Menon <nm@ti.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-01clk: ti: am43x: Fix boot with CONFIG_SOC_AM33XX disabledRoger Quadros1-2/+3
Define ti_clk_register_dpll_x2() and of_ti_am3_dpll_x2_setup() if AM43XX is defined. Fixes the below boot issue. [ 2.157258] gpmc_l3_clk not enabled [ 2.161194] gpmc_l3_clk not enabled [ 2.164896] Division by zero in kernel. [ 2.169055] CPU: 0 PID: 321 Comm: kworker/u2:2 Tainted: G W 3.16.0-rc1-00008-g4c0e520 #273 [ 2.178880] Workqueue: deferwq deferred_probe_work_func [ 2.184459] [<c001477c>] (unwind_backtrace) from [<c001187c>] (show_stack+0x10/0x14) [ 2.192752] [<c001187c>] (show_stack) from [<c0530f28>] (dump_stack+0x80/0x9c) [ 2.200486] [<c0530f28>] (dump_stack) from [<c02c867c>] (Ldiv0+0x8/0x10) [ 2.207678] [<c02c867c>] (Ldiv0) from [<c0022da0>] (gpmc_calc_divider+0x24/0x40) [ 2.215490] [<c0022da0>] (gpmc_calc_divider) from [<c0022e20>] (gpmc_cs_set_timings+0x18/0x474) [ 2.224783] [<c0022e20>] (gpmc_cs_set_timings) from [<c003069c>] (gpmc_nand_init+0x74/0x1a8) [ 2.233791] [<c003069c>] (gpmc_nand_init) from [<c0024668>] (gpmc_probe+0x52c/0x874) [ 2.242089] [<c0024668>] (gpmc_probe) from [<c0349218>] (platform_drv_probe+0x18/0x48) [ 2.250534] [<c0349218>] (platform_drv_probe) from [<c0347d88>] (driver_probe_device+0x104/0x22c) [ 2.259988] [<c0347d88>] (driver_probe_device) from [<c03464dc>] (bus_for_each_drv+0x44/0x8c) [ 2.269087] [<c03464dc>] (bus_for_each_drv) from [<c0347c4c>] (device_attach+0x74/0x8c) [ 2.277620] [<c0347c4c>] (device_attach) from [<c0347380>] (bus_probe_device+0x88/0xb0) [ 2.286074] [<c0347380>] (bus_probe_device) from [<c0347768>] (deferred_probe_work_func+0x60/0x90) [ 2.295611] [<c0347768>] (deferred_probe_work_func) from [<c004ef50>] (process_one_work+0x1b4/0x4bc) [ 2.305288] [<c004ef50>] (process_one_work) from [<c004f3d4>] (worker_thread+0x148/0x550) [ 2.313954] [<c004f3d4>] (worker_thread) from [<c0055a48>] (kthread+0xc8/0xe4) [ 2.321628] [<c0055a48>] (kthread) from [<c000e648>] (ret_from_fork+0x14/0x2c) Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-01clk: Fix build warningsSachin Kamat1-11/+11
‘all_lists’ and ‘orphan_list’ is accessed only when DEBUG_FS is defined. Thus, make their compilation conditional to fix the below warnings introduced by commit 27b8d5f723 ("clk: flatten clk tree in debugfs"): drivers/clk/clk.c:40:27: warning: ‘all_lists’ defined but not used [-Wunused-variable] drivers/clk/clk.c:46:27: warning: ‘orphan_list’ defined but not used [-Wunused-variable] Signed-off-by: Sachin Kamat <sachin.kamat@samsung.com> Cc: Peter De Schrijver <pdeschrijver@nvidia.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-01clk: ppc-corenet: Fix Section mismatch warningJingchang Lu1-1/+1
WARNING: drivers/built-in.o(.data+0x10258): Section mismatch in reference from the variable ppc_corenet_clk_driver to the (unknown reference) .init.rodata:(unknown) The variable ppc_corenet_clk_driver references the (unknown reference) __initconst (unknown) If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console Signed-off-by: Jingchang Lu <jingchang.lu@freescale.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
2014-07-01Merge remote-tracking branch 'linaro/clk-next' into clk-nextMike Turquette2-81/+38
2014-06-30clk: tegra: export clock names for debuggingPeter De Schrijver1-0/+6
When writing a module for testing or debugging purposes, there is no way to get hold of clk handles. This patch solves this by exposing all valid clocks as clkdev's for the virtual device tegra-clk-debug. Signed-off-by: Peter De Schrijver <pdeschrijver@nvidia.com>
2014-06-30clk: exynos5420: Remove aclk66_peric from the clock tree descriptionDoug Anderson2-31/+55
The "aclk66_peric" clock is a gate clock with a whole bunch of gates underneath it. This big gate isn't very useful to include in our clock tree. If any of the children need to be turned on then the big gate will need to be on anyway. ...and there are plenty of other "big gates" that aren't described in our clock tree, some of which shut off collections of clocks that have no relationship in the hierarchy so are hard to model. "aclk66_peric" is causing earlyprintk problems since it gets disabled as part of the boot process, so let's just remove it. Strangely (and for no good reason) this clock is exported as part of the common clock bindings. Remove it since there are no in-kernel device trees using it and no reason anyone out of tree should refer to it either. Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Tomasz Figa <t.figa@samsung.com>
2014-06-30clk/exynos5250: fix bit number for tv sysmmu clockRahul Sharma1-1/+1
Change bit from 2 to 9 for tv (mixer) sysmmu clock. Signed-off-by: Rahul Sharma <rahul.sharma@samsung.com> Reviewed-by: Sachin Kamat <sachin.kamat@samsung.com> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Tomasz Figa <t.figa@samsung.com>
2014-06-30clk: s3c64xx: Hookup SPI clocks correctlyCharles Keepax1-2/+4
In the move to this clock driver the hookups for the SPI clocks were dropped, which causes my system Cragganmore (s3c6410 based) to be unable to locate any spibus clocks. This patch adds them back in. When taking the clock from the epll clock (SCLK) the rates on the SPI bus are incorrect, this needs further debugging but the hookup here should be correct and the problem should be else where. The USBCLK case has been dropped because this requires the USB PHY to be enabled. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Tomasz Figa <t.figa@samsung.com>
2014-06-30clk: samsung: exynos4: Remove SRC_MASK_ISP gatesTomasz Figa1-12/+4
ISP special clocks have dedicated gating registers and so MUX SRC_MASK register should not be used. This patch fixes the problem of Exynos4x12-based boards freezing on system suspend, because those mux outputs need not to be masked while suspending. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Cc: Mike Turquette <mturquette@linaro.org>
2014-06-30clk: samsung: add more aliases for s3c24xxVasily Khoruzhick1-0/+5
Without these aliases clock lookup fails in s3c2410fb, s3cmci, s3c2410-nand, s3c24xx-i2s, and i2c-s3c2410 drivers. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Tomasz Figa <t.figa@samsung.com>
2014-06-30clk: samsung: fix several typos to fix boot on s3c2410Vasily Khoruzhick1-2/+2
There's a several typos in a driver: 2410 instead of S3C2410 and wrong argument to ARRAY_SIZE(). They prevent s3c2410 from properly booting. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Tomasz Figa <t.figa@samsung.com>
2014-06-29Linux 3.16-rc3v3.16-rc3Linus Torvalds1-1/+1
2014-06-29Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds6-6/+45
Pull ARM fixes from Russell King: "Another round of ARM fixes. The largest change here is the L2 changes to work around problems for the Armada 37x/380 devices, where most of the size comes down to comments rather than code. The other significant fix here is for the ptrace code, to ensure that rewritten syscalls work as intended. This was pointed out by Kees Cook, but Will Deacon reworked the patch to be more elegant. The remainder are fairly trivial changes" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8087/1: ptrace: reload syscall number after secure_computing() check ARM: 8086/1: Set memblock limit for nommu ARM: 8085/1: sa1100: collie: add top boot mtd partition ARM: 8084/1: sa1100: collie: revert back to cfi_probe ARM: 8080/1: mcpm.h: remove unused variable declaration ARM: 8076/1: mm: add support for HW coherent systems in PL310 cache
2014-06-29MAINTAINERS: exceptions for Documentation maintainerRandy Dunlap1-0/+3
Note that I don't maintain Documentation/ABI/, Documentation/devicetree/, or the language translation files. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-29Documentation: add section about git to email-clients.txtDan Carpenter1-0/+11
These days most people use git to send patches so I have added a section about that. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-29ARM: 8087/1: ptrace: reload syscall number after secure_computing() checkWill Deacon1-3/+4
On the syscall tracing path, we call out to secure_computing() to allow seccomp to check the syscall number being attempted. As part of this, a SIGTRAP may be sent to the tracer and the syscall could be re-written by a subsequent SET_SYSCALL ptrace request. Unfortunately, this new syscall is ignored by the current code unless TIF_SYSCALL_TRACE is also set on the current thread. This patch slightly reworks the enter path of the syscall tracing code so that we always reload the syscall number from current_thread_info()->syscall after the potential ptrace traps. Acked-by: Kees Cook <keescook@chromium.org> Tested-by: Kees Cook <keescook@chromium.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-06-29ARM: 8086/1: Set memblock limit for nommuLaura Abbott1-0/+1
Commit 1c2f87c (ARM: 8025/1: Get rid of meminfo) changed find_limits to use memblock_get_current_limit for calculating the max_low pfn. nommu targets never actually set a limit on memblock though which means memblock_get_current_limit will just return the default value. Set the memblock_limit to be the end of DDR to make sure bounds are calculated correctly. Signed-off-by: Laura Abbott <lauraa@codeaurora.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-06-29ARM: 8085/1: sa1100: collie: add top boot mtd partitionAndrea Adami1-0/+5
The CFI mapping is now perfect so we can expose the top block, read only. There isn't much to read, though, just the sharpsl_params values. Signed-off-by: Andrea Adami <andrea.adami@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-06-29ARM: 8084/1: sa1100: collie: revert back to cfi_probeAndrea Adami1-1/+1
Reverts commit d26b17edafc45187c30cae134a5e5429d58ad676 ARM: sa1100: collie.c: fall back to jedec_probe flash detection Unfortunately the detection was challenged on the defective unit used for tests: one of the NOR chips did not respond to the CFI query. Moreover that bad device needed extra delays on erase-suspend/resume cycles. Tested personally on 3 different units and with feedback of two other users. Signed-off-by: Andrea Adami <andrea.adami@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-06-29ARM: 8080/1: mcpm.h: remove unused variable declarationNicolas Pitre1-2/+0
The sync_phys variable has been replaced by link time computation in mcpm_head.S before the code was submitted upstream. Signed-off-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-06-29ARM: 8076/1: mm: add support for HW coherent systems in PL310 cacheThomas Petazzoni2-0/+34
When a PL310 cache is used on a system that provides hardware coherency, the outer cache sync operation is useless, and can be skipped. Moreover, on some systems, it is harmful as it causes deadlocks between the Marvell coherency mechanism, the Marvell PCIe controller and the Cortex-A9. To avoid this, this commit introduces a new Device Tree property 'arm,io-coherent' for the L2 cache controller node, valid only for the PL310 cache. It identifies the usage of the PL310 cache in an I/O coherent configuration. Internally, it makes the driver disable the outer cache sync operation. Note that technically speaking, a fully coherent system wouldn't require any of the other .outer_cache operations. However, in practice, when booting secondary CPUs, these are not yet coherent, and therefore a set of cache maintenance operations are necessary at this point. This explains why we keep the other .outer_cache operations and only ->sync is disabled. While in theory any write to a PL310 register could cause the deadlock, in practice, disabling ->sync is sufficient to workaround the deadlock, since the other cache maintenance operations are only used in very specific situations. Contrary to previous versions of this patch, this new version does not simply NULL-ify the ->sync member, because the l2c_init_data structures are now 'const' and therefore cannot be modified, which is a good thing. Therefore, this patch introduces a separate l2c_init_data instance, called of_l2c310_coherent_data. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-06-28Merge tag 'spi-v3.16-rc2' of ↵Linus Torvalds4-35/+27
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A few driver specific fixes, the biggest one being a fix for the newly added Qualcomm SPI controller driver to make it not use its internal chip select due to hardware bugs, replacing it with GPIOs" * tag 'spi-v3.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: qup: Remove chip select function spi: qup: Fix order of spi_register_master spi: sh-sci: fix use-after-free in sh_sci_spi_remove() spi/pxa2xx: fix incorrect SW mode chipselect setting for BayTrail LPSS SPI
2014-06-28Merge tag 'regulator-v3.16-rc2' of ↵Linus Torvalds3-1/+19
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "Several driver specific fixes here, the palmas fixes being especially important for a range of boards - the recent updates to support new devices have introduced several regressions" * tag 'regulator-v3.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: tps65218: Correct the the config register for LDO1 regulator: tps65218: Add the missing of_node assignment in probe regulator: palmas: fix typo in enable_reg calculation regulator: bcm590xx: fix vbus name regulator: palmas: Fix SMPS enable/disable/is_enabled
2014-06-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds10-70/+82
Pull SCSI target fixes from Nicholas Bellinger: "Mostly minor fixes this time around. The highlights include: - iscsi-target CHAP authentication fixes to enforce explicit key values (Tejas Vaykole + rahul.rane) - fix a long-standing OOPs in target-core when a alua configfs attribute is accessed after port symlink has been removed. (Sebastian Herbszt) - fix a v3.10.y iscsi-target regression causing the login reject status class/detail to be ignored (Christoph Vu-Brugier) - fix a v3.10.y iscsi-target regression to avoid rejecting an existing ITT during Data-Out when data-direction is wrong (Santosh Kulkarni + Arshad Hussain) - fix a iscsi-target related shutdown deadlock on UP kernels (Mikulas Patocka) - fix a v3.16-rc1 build issue with vhost-scsi + !CONFIG_NET (MST)" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: iscsi-target: fix iscsit_del_np deadlock on unload iovec: move memcpy_from/toiovecend to lib/iovec.c iscsi-target: Avoid rejecting incorrect ITT for Data-Out tcm_loop: Fix memory leak in tcm_loop_submission_work error path iscsi-target: Explicily clear login response PDU in exception path target: Fix left-over se_lun->lun_sep pointer OOPs iscsi-target; Enforce 1024 byte maximum for CHAP_C key value iscsi-target: Convert chap_server_compute_md5 to use kstrtoul
2014-06-28Merge remote-tracking branches 'spi/fix/pxa2xx', 'spi/fix/qup' and ↵Mark Brown4-35/+27
'spi/fix/sh-sci' into spi-linus
2014-06-28Merge remote-tracking branches 'regulator/fix/bcm590xx', ↵Mark Brown3-1/+19
'regulator/fix/palmas' and 'regulator/fix/tps65218' into regulator-linus
2014-06-27iscsi-target: fix iscsit_del_np deadlock on unloadMikulas Patocka1-6/+7
On uniprocessor preemptible kernel, target core deadlocks on unload. The following events happen: * iscsit_del_np is called * it calls send_sig(SIGINT, np->np_thread, 1); * the scheduler switches to the np_thread * the np_thread is woken up, it sees that kthread_should_stop() returns false, so it doesn't terminate * the np_thread clears signals with flush_signals(current); and goes back to sleep in iscsit_accept_np * the scheduler switches back to iscsit_del_np * iscsit_del_np calls kthread_stop(np->np_thread); * the np_thread is waiting in iscsit_accept_np and it doesn't respond to kthread_stop The deadlock could be resolved if the administrator sends SIGINT signal to the np_thread with killall -INT iscsi_np The reproducible deadlock was introduced in commit db6077fd0b7dd41dc6ff18329cec979379071f87, but the thread-stopping code was racy even before. This patch fixes the problem. Using kthread_should_stop to stop the np_thread is unreliable, so we test np_thread_state instead. If np_thread_state equals ISCSI_NP_THREAD_SHUTDOWN, the thread exits. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2014-06-27Merge tag 'iommu-fixes-v3.16-rc1' of ↵Linus Torvalds2-11/+16
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU fixes from Joerg Roedel: - fix VT-d regression with handling multiple RMRR entries per device - fix a small race that was left in the mmu_notifier handling in the AMD IOMMUv2 driver * tag 'iommu-fixes-v3.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/amd: Fix small race between invalidate_range_end/start iommu/vt-d: fix bug in handling multiple RMRRs for the same PCI device
2014-06-27Merge branch 'x86/urgent' of ↵Linus Torvalds14-129/+302
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Peter Anvin: "A pile of fixes related to the VDSO, EFI and 32-bit badsys handling. It turns out that removing the section headers from the VDSO breaks gdb, so this puts back most of them. A very simple typo broke rt_sigreturn on some versions of glibc, with obviously disastrous results. The rest is pretty much fixes for the corresponding fallout. The EFI fixes fixes an arithmetic overflow on 32-bit systems and quiets some build warnings. Finally, when invoking an invalid system call number on x86-32, we bypass a bunch of handling, which can make the audit code oops" * 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi-pstore: Fix an overflow on 32-bit builds x86/vdso: Error out in vdso2c if DT_RELA is present x86/vdso: Move DISABLE_BRANCH_PROFILING into the vdso makefile x86_32, signal: Fix vdso rt_sigreturn x86_32, entry: Do syscall exit work on badsys (CVE-2014-4508) x86/vdso: Create .build-id links for unstripped vdso files x86/vdso: Remove some redundant in-memory section headers x86/vdso: Improve the fake section headers x86/vdso2c: Use better macros for ELF bitness x86/vdso: Discard the __bug_table section efi: Fix compiler warnings (unused, const, type)
2014-06-27Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds19-499/+211
Pull MIPS fixes from Ralf Baechle: "This is dominated by a large number of changes necessary for the MIPS BPF code. code. Aside of that there are - a fix for the MSC system controller support code. - a Turbochannel fix. - a recordmcount fix that's MIPS-specific. - barrier fixes to smp-cps / pm-cps after unrelated changes elsewhere in the kernel. - revert support for MSA registers in the signal frames. The reverted patch did modify the signal stack frame which of course is inacceptable. - fix math-emu build breakage with older compilers. - some related cleanup. - fix Lasat build error if CONFIG_CRC32 isn't set to y by the user" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (27 commits) MIPS: Lasat: Fix build error if CRC32 is not enabled. TC: Handle device_register() errors. MIPS: MSC: Prevent out-of-bounds writes to MIPS SC ioremap'd region MIPS: bpf: Fix stack space allocation for BPF memwords on MIPS64 MIPS: BPF: Use 32 or 64-bit load instruction to load an address to register MIPS: bpf: Fix PKT_TYPE case for big-endian cores MIPS: BPF: Prevent kernel fall over for >=32bit shifts MIPS: bpf: Drop update_on_xread and always initialize the X register MIPS: bpf: Fix is_range() semantics MIPS: bpf: Use pr_debug instead of pr_warn for unhandled opcodes MIPS: bpf: Fix return values for VLAN_TAG_PRESENT case MIPS: bpf: Use correct mask for VLAN_TAG case MIPS: bpf: Fix branch conditional for BPF_J{GT/GE} cases MIPS: bpf: Add SEEN_SKB to flags when looking for the PKT_TYPE MIPS: bpf: Use 'andi' instead of 'and' for the VLAN cases MIPS: bpf: Return error code if the offset is a negative number MIPS: bpf: Use the LO register to get division's quotient MIPS: mm: uasm: Fix lh micro-assembler instruction MIPS: uasm: Add SLT uasm instruction MIPS: uasm: Add s3s1s2 instruction builder ...
2014-06-27Merge tag 'arc-fixes-for-3.16' of ↵Linus Torvalds9-16/+46
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC fixes from Vineet Gupta: "Some SMP changes, a ptrace request for NPTL debugging, bunch of build breakages/warnings" * tag 'arc-fixes-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: [SMP] Enable icache coherency ARC: [SMP] Fix IPI IRQ registration ARC: Implement ptrace(PTRACE_GET_THREAD_AREA) ARC: optimize kernel bss clearing in early boot code ARC: Fix build breakage for !CONFIG_ARC_DW2_UNWIND ARC: fix build warning in devtree ARC: remove checks for CONFIG_ARC_MMU_V4
2014-06-27Merge tag 'compress-3.16-rc3' of ↵Linus Torvalds1-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull compress bugfix from Greg KH: "Here is another lz4 bugfix for 3.16-rc3 that resolves a reported issue with that compression algorithm" * tag 'compress-3.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: lz4: fix another possible overrun
2014-06-27Merge tag 'stable/for-linus-3.16-rc1-tag' of ↵Linus Torvalds1-10/+18
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb Pull swiotlb bugfix from Konrad Rzeszutek Wilk: "One bug-fix that had been in tree for quite some time. We had assumed that the physical address zero was invalid and would fail it. But that is not true and on some architectures it is not reserved and valid. This fixes it" * tag 'stable/for-linus-3.16-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb: swiotlb: don't assume PA 0 is invalid
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-16 19:32:04 +0000