summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2023-01-10selftests/net: l2_tos_ttl_inherit.sh: Ensure environment cleanup on failure.Guillaume Nault1-4/+36
Use 'set -e' and an exit handler to stop the script if a command fails and ensure the test environment is cleaned up in any case. Also, handle the case where the script is interrupted by SIGINT. The only command that's expected to fail is 'wait $ping_pid', since it's killed by the script. Handle this case with '|| true' to make it play well with 'set -e'. Finally, return the Kselftest SKIP code (4) when the script breaks because of an environment problem or a command line failure. The 0 and 1 return codes should now reliably indicate that all tests have been run (0: all tests run and passed, 1: all tests run but at least one failed, 4: test script didn't run completely). Fixes: b690842d12fd ("selftests/net: test l2 tunnel TOS/TTL inheriting") Reported-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr> Tested-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr> Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-01-10selftests/net: l2_tos_ttl_inherit.sh: Run tests in their own netns.Guillaume Nault1-69/+93
This selftest currently runs half in the current namespace and half in a netns of its own. Therefore, the test can fail if the current namespace is already configured with incompatible parameters (for example if it already has a veth0 interface). Adapt the script to put both ends of the veth pair in their own netns. Now veth0 is created in NS0 instead of the current namespace, while veth1 is set up in NS1 (instead of the 'testing' netns). The user visible netns names are randomised to minimise the risk of conflicts with already existing namespaces. The cleanup() function doesn't need to remove the virtual interface anymore: deleting NS0 and NS1 automatically removes the virtual interfaces they contained. We can remove $ns, which was only used to run ip commands in the 'testing' netns (let's use the builtin "-netns" option instead). However, we still need a similar functionality as ping and tcpdump now need to run in NS0. So we now have $RUN_NS0 for that. Fixes: b690842d12fd ("selftests/net: test l2 tunnel TOS/TTL inheriting") Reported-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr> Tested-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr> Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-01-10selftests/net: l2_tos_ttl_inherit.sh: Set IPv6 addresses with "nodad".Guillaume Nault1-4/+4
The ping command can run before DAD completes. In that case, ping may fail and break the selftest. We don't need DAD here since we're working on isolated device pairs. Fixes: b690842d12fd ("selftests/net: test l2 tunnel TOS/TTL inheriting") Signed-off-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-01-09Revert "r8169: disable detection of chip version 36"Heiner Kallweit1-4/+1
This reverts commit 42666b2c452ce87894786aae05e3fad3cfc6cb59. This chip version seems to be very rare, but it exits in consumer devices, see linked report. Link: https://stackoverflow.com/questions/75049473/cant-setup-a-wired-network-in-archlinux-fresh-install Fixes: 42666b2c452c ("r8169: disable detection of chip version 36") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/42e9674c-d5d0-a65a-f578-e5c74f244739@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-09net/sched: act_mpls: Fix warning during failed attribute validationIdo Schimmel1-1/+7
The 'TCA_MPLS_LABEL' attribute is of 'NLA_U32' type, but has a validation type of 'NLA_VALIDATE_FUNCTION'. This is an invalid combination according to the comment above 'struct nla_policy': " Meaning of `validate' field, use via NLA_POLICY_VALIDATE_FN: NLA_BINARY Validation function called for the attribute. All other Unused - but note that it's a union " This can trigger the warning [1] in nla_get_range_unsigned() when validation of the attribute fails. Despite being of 'NLA_U32' type, the associated 'min'/'max' fields in the policy are negative as they are aliased by the 'validate' field. Fix by changing the attribute type to 'NLA_BINARY' which is consistent with the above comment and all other users of NLA_POLICY_VALIDATE_FN(). As a result, move the length validation to the validation function. No regressions in MPLS tests: # ./tdc.py -f tc-tests/actions/mpls.json [...] # echo $? 0 [1] WARNING: CPU: 0 PID: 17743 at lib/nlattr.c:118 nla_get_range_unsigned+0x1d8/0x1e0 lib/nlattr.c:117 Modules linked in: CPU: 0 PID: 17743 Comm: syz-executor.0 Not tainted 6.1.0-rc8 #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-48-gd9c812dda519-prebuilt.qemu.org 04/01/2014 RIP: 0010:nla_get_range_unsigned+0x1d8/0x1e0 lib/nlattr.c:117 [...] Call Trace: <TASK> __netlink_policy_dump_write_attr+0x23d/0x990 net/netlink/policy.c:310 netlink_policy_dump_write_attr+0x22/0x30 net/netlink/policy.c:411 netlink_ack_tlv_fill net/netlink/af_netlink.c:2454 [inline] netlink_ack+0x546/0x760 net/netlink/af_netlink.c:2506 netlink_rcv_skb+0x1b7/0x240 net/netlink/af_netlink.c:2546 rtnetlink_rcv+0x18/0x20 net/core/rtnetlink.c:6109 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x5e9/0x6b0 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x739/0x860 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg net/socket.c:734 [inline] ____sys_sendmsg+0x38f/0x500 net/socket.c:2482 ___sys_sendmsg net/socket.c:2536 [inline] __sys_sendmsg+0x197/0x230 net/socket.c:2565 __do_sys_sendmsg net/socket.c:2574 [inline] __se_sys_sendmsg net/socket.c:2572 [inline] __x64_sys_sendmsg+0x42/0x50 net/socket.c:2572 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Link: https://lore.kernel.org/netdev/CAO4mrfdmjvRUNbDyP0R03_DrD_eFCLCguz6OxZ2TYRSv0K9gxA@mail.gmail.com/ Fixes: 2a2ea50870ba ("net: sched: add mpls manipulation actions to TC") Reported-by: Wei Chen <harperchen1110@gmail.com> Tested-by: Wei Chen <harperchen1110@gmail.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Link: https://lore.kernel.org/r/20230107171004.608436-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-09af_unix: selftest: Fix the size of the parameter to connect()Mirsad Goran Todorovac1-1/+1
Adjust size parameter in connect() to match the type of the parameter, to fix "No such file or directory" error in selftests/net/af_unix/ test_oob_unix.c:127. The existing code happens to work provided that the autogenerated pathname is shorter than sizeof (struct sockaddr), which is why it hasn't been noticed earlier. Visible from the trace excerpt: bind(3, {sa_family=AF_UNIX, sun_path="unix_oob_453059"}, 110) = 0 clone(child_stack=NULL, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0x7fa6a6577a10) = 453060 [pid <child>] connect(6, {sa_family=AF_UNIX, sun_path="unix_oob_45305"}, 16) = -1 ENOENT (No such file or directory) BUG: The filename is trimmed to sizeof (struct sockaddr). Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Kuniyuki Iwashima <kuniyu@amazon.co.jp> Cc: Florian Westphal <fw@strlen.de> Reviewed-by: Florian Westphal <fw@strlen.de> Fixes: 314001f0bf92 ("af_unix: Add OOB support") Signed-off-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-09net: lan966x: Allow to add rules in TCAM even if not enabledHoratiu Vultur1-3/+0
The blamed commit implemented the vcap_operations to allow to add an entry in the TCAM. One of the callbacks is to validate the supported keysets. If the TCAM lookup was not enabled, then this will return failure so no entries could be added. This doesn't make much sense, as you can enable at a later point the TCAM. Therefore change it such to allow entries in TCAM even it is not enabled. Fixes: 4426b78c626d ("net: lan966x: Add port keyset config and callback interface") Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-09gro: take care of DODGY packetsEric Dumazet1-2/+3
Jaroslav reported a recent throughput regression with virtio_net caused by blamed commit. It is unclear if DODGY GSO packets coming from user space can be accepted by GRO engine in the future with minimal changes, and if there is any expected gain from it. In the meantime, make sure to detect and flush DODGY packets. Fixes: 5eddb24901ee ("gro: add support of (hw)gro packets to gro stack") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-and-bisected-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com> Cc: Coco Li <lixiaoyan@google.com> Cc: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-09nfc: pn533: Wait for out_urb's completion in pn533_usb_send_frame()Minsuk Kang1-3/+41
Fix a use-after-free that occurs in hcd when in_urb sent from pn533_usb_send_frame() is completed earlier than out_urb. Its callback frees the skb data in pn533_send_async_complete() that is used as a transfer buffer of out_urb. Wait before sending in_urb until the callback of out_urb is called. To modify the callback of out_urb alone, separate the complete function of out_urb and ack_urb. Found by a modified version of syzkaller. BUG: KASAN: use-after-free in dummy_timer Call Trace: memcpy (mm/kasan/shadow.c:65) dummy_perform_transfer (drivers/usb/gadget/udc/dummy_hcd.c:1352) transfer (drivers/usb/gadget/udc/dummy_hcd.c:1453) dummy_timer (drivers/usb/gadget/udc/dummy_hcd.c:1972) arch_static_branch (arch/x86/include/asm/jump_label.h:27) static_key_false (include/linux/jump_label.h:207) timer_expire_exit (include/trace/events/timer.h:127) call_timer_fn (kernel/time/timer.c:1475) expire_timers (kernel/time/timer.c:1519) __run_timers (kernel/time/timer.c:1790) run_timer_softirq (kernel/time/timer.c:1803) Fixes: c46ee38620a2 ("NFC: pn533: add NXP pn533 nfc device driver") Signed-off-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-09mlxsw: spectrum_router: Replace 0-length array with flexible arrayKees Cook1-1/+1
Zero-length arrays are deprecated[1]. Replace struct mlxsw_sp_nexthop_group_info's "nexthops" 0-length array with a flexible array. Detected with GCC 13, using -fstrict-flex-arrays=3: drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c: In function 'mlxsw_sp_nexthop_group_hash_obj': drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:3278:38: warning: array subscript i is outside array bounds of 'struct mlxsw_sp_nexthop[0]' [-Warray-bounds=] 3278 | val ^= jhash(&nh->ifindex, sizeof(nh->ifindex), seed); | ^~~~~~~~~~~~ drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:2954:33: note: while referencing 'nexthops' 2954 | struct mlxsw_sp_nexthop nexthops[0]; | ^~~~~~~~ [1] https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays Cc: Ido Schimmel <idosch@nvidia.com> Cc: Petr Machata <petrm@nvidia.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org> Cc: netdev@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Tested-by: Petr Machata <petrm@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-09net: ipa: correct IPA v4.7 IMEM offsetAlex Elder1-1/+1
Commit b310de784bacd ("net: ipa: add IPA v4.7 support") was merged despite an unresolved comment made by Konrad Dybcio. Konrad observed that the IMEM region specified for IPA v4.7 did not match that used downstream for the SM7225 SoC. In "lagoon.dtsi" present in a Sony Xperia source tree, a ipa_smmu_ap node was defined with a "qcom,additional-mapping" property that defined the IPA IMEM area starting at offset 0x146a8000 (not 0x146a9000 that was committed). The IPA v4.7 target system used for testing uses the SM7225 SoC, so we'll adhere what the downstream code specifies is the address of the IMEM region used for IPA. Link: https://lore.kernel.org/linux-arm-msm/20221208211529.757669-1-elder@linaro.org Fixes: b310de784bac ("net: ipa: add IPA v4.7 support") Tested-by: Luca Weiss <luca.weiss@fairphone.com> Signed-off-by: Alex Elder <elder@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-09brcmfmac: Prefer DT board type over DMI board typeIvan T. Ivanov1-2/+3
The introduction of support for Apple board types inadvertently changed the precedence order, causing hybrid SMBIOS+DT platforms to look up the firmware using the DMI information instead of the device tree compatible to generate the board type. Revert back to the old behavior, as affected platforms use firmwares named after the DT compatible. Fixes: 7682de8b3351 ("wifi: brcmfmac: of: Fetch Apple properties") [1] https://bugzilla.opensuse.org/show_bug.cgi?id=1206697#c13 Cc: stable@vger.kernel.org Signed-off-by: Ivan T. Ivanov <iivanov@suse.de> Reviewed-by: Hector Martin <marcan@marcan.st> Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Tested-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-07Merge tag 'rxrpc-fixes-20230107' of ↵David S. Miller29-1760/+1592
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs David Howells says: ==================== rxrpc: Fix race between call connection, data transmit and call disconnect Here are patches to fix an oops[1] caused by a race between call connection, initial packet transmission and call disconnection which results in something like: kernel BUG at net/rxrpc/peer_object.c:413! when the syzbot test is run. The problem is that the connection procedure is effectively split across two threads and can get expanded by taking an interrupt, thereby adding the call to the peer error distribution list *after* it has been disconnected (say by the rxrpc socket shutting down). The easiest solution is to look at the fourth set of I/O thread conversion/SACK table expansion patches that didn't get applied[2] and take from it those patches that move call connection and disconnection into the I/O thread. Moving these things into the I/O thread means that the sequencing is managed by all being done in the same thread - and the race can no longer happen. This is preferable to introducing an extra lock as adding an extra lock would make the I/O thread have to wait for the app thread in yet another place. The changes can be considered as a number of logical parts: (1) Move all of the call state changes into the I/O thread. (2) Make client connection ID space per-local endpoint so that the I/O thread doesn't need locks to access it. (3) Move actual abort generation into the I/O thread and clean it up. If sendmsg or recvmsg want to cause an abort, they have to delegate it. (4) Offload the setting up of the security context on a connection to the thread of one of the apps that's starting a call. We don't want to be doing any sort of crypto in the I/O thread. (5) Connect calls (ie. assign them to channel slots on connections) in the I/O thread. Calls are set up by sendmsg/kafs and passed to the I/O thread to connect. Connections are allocated in the I/O thread after this. (6) Disconnect calls in the I/O thread. I've also added a patch for an unrelated bug that cropped up during testing, whereby a race can occur between an incoming call and socket shutdown. Note that whilst this fixes the original syzbot bug, another bug may get triggered if this one is fixed: INFO: rcu detected stall in corrupted rcu: INFO: rcu_preempt detected expedited stalls on CPUs/tasks: { P5792 } 2657 jiffies s: 2825 root: 0x0/T rcu: blocking rcu_node structures (internal RCU debug): It doesn't look this should be anything to do with rxrpc, though, as I've tested an additional patch[3] that removes practically all the RCU usage from rxrpc and it still occurs. It seems likely that it is being caused by something in the tunnelling setup that the syzbot test does, but there's not enough info to go on. It also seems unlikely to be anything to do with the afs driver as the test doesn't use that. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-07rxrpc: Fix incoming call setup raceDavid Howells4-15/+15
An incoming call can race with rxrpc socket destruction, leading to a leaked call. This may result in an oops when the call timer eventually expires: BUG: kernel NULL pointer dereference, address: 0000000000000874 RIP: 0010:_raw_spin_lock_irqsave+0x2a/0x50 Call Trace: <IRQ> try_to_wake_up+0x59/0x550 ? __local_bh_enable_ip+0x37/0x80 ? rxrpc_poke_call+0x52/0x110 [rxrpc] ? rxrpc_poke_call+0x110/0x110 [rxrpc] ? rxrpc_poke_call+0x110/0x110 [rxrpc] call_timer_fn+0x24/0x120 with a warning in the kernel log looking something like: rxrpc: Call 00000000ba5e571a still in use (1,SvAwtACK,1061d,0)! incurred during rmmod of rxrpc. The 1061d is the call flags: RECVMSG_READ_ALL, RX_HEARD, BEGAN_RX_TIMER, RX_LAST, EXPOSED, IS_SERVICE, RELEASED but no DISCONNECTED flag (0x800), so it's an incoming (service) call and it's still connected. The race appears to be that: (1) rxrpc_new_incoming_call() consults the service struct, checks sk_state and allocates a call - then pauses, possibly for an interrupt. (2) rxrpc_release_sock() sets RXRPC_CLOSE, nulls the service pointer, discards the prealloc and releases all calls attached to the socket. (3) rxrpc_new_incoming_call() resumes, launching the new call, including its timer and attaching it to the socket. Fix this by read-locking local->services_lock to access the AF_RXRPC socket providing the service rather than RCU in rxrpc_new_incoming_call(). There's no real need to use RCU here as local->services_lock is only write-locked by the socket side in two places: when binding and when shutting down. Fixes: 5e6ef4f1017c ("rxrpc: Make the I/O thread take over the call and local processor work") Reported-by: Marc Dionne <marc.dionne@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> cc: linux-afs@lists.infradead.org
2023-01-06octeontx2-af: Fix LMAC config in cgx_lmac_rx_tx_enableAngela Czubak2-3/+2
PF netdev can request AF to enable or disable reception and transmission on assigned CGX::LMAC. The current code instead of disabling or enabling 'reception and transmission' also disables/enable the LMAC. This patch fixes this issue. Fixes: 1435f66a28b4 ("octeontx2-af: CGX Rx/Tx enable/disable mbox handlers") Signed-off-by: Angela Czubak <aczubak@marvell.com> Signed-off-by: Hariprasad Kelam <hkelam@marvell.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20230105160107.17638-1-hkelam@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-06tipc: fix unexpected link reset due to discovery messagesTung Nguyen1-4/+8
This unexpected behavior is observed: node 1 | node 2 ------ | ------ link is established | link is established reboot | link is reset up | send discovery message receive discovery message | link is established | link is established send discovery message | | receive discovery message | link is reset (unexpected) | send reset message link is reset | It is due to delayed re-discovery as described in function tipc_node_check_dest(): "this link endpoint has already reset and re-established contact with the peer, before receiving a discovery message from that node." However, commit 598411d70f85 has changed the condition for calling tipc_node_link_down() which was the acceptance of new media address. This commit fixes this by restoring the old and correct behavior. Fixes: 598411d70f85 ("tipc: make resetting of links non-atomic") Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-01-06rxrpc: Move client call connection to the I/O threadDavid Howells14-530/+297
Move the connection setup of client calls to the I/O thread so that a whole load of locking and barrierage can be eliminated. This necessitates the app thread waiting for connection to complete before it can begin encrypting data. This also completes the fix for a race that exists between call connection and call disconnection whereby the data transmission code adds the call to the peer error distribution list after the call has been disconnected (say by the rxrpc socket getting closed). The fix is to complete the process of moving call connection, data transmission and call disconnection into the I/O thread and thus forcibly serialising them. Note that the issue may predate the overhaul to an I/O thread model that were included in the merge window for v6.2, but the timing is very much changed by the change given below. Fixes: cf37b5987508 ("rxrpc: Move DATA transmission into call processor work item") Reported-by: syzbot+c22650d2844392afdcfd@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org
2023-01-06rxrpc: Move the client conn cache management to the I/O threadDavid Howells6-86/+62
Move the management of the client connection cache to the I/O thread rather than managing it from the namespace as an aggregate across all the local endpoints within the namespace. This will allow a load of locking to be got rid of in a future patch as only the I/O thread will be looking at the this. The downside is that the total number of cached connections on the system can get higher because the limit is now per-local rather than per-netns. We can, however, keep the number of client conns in use across the entire netfs and use that to reduce the expiration time of idle connection. Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org
2023-01-06rxrpc: Remove call->state_lockDavid Howells12-184/+142
All the setters of call->state are now in the I/O thread and thus the state lock is now unnecessary. Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org
2023-01-06rxrpc: Move call state changes from recvmsg to I/O threadDavid Howells5-111/+109
Move the call state changes that are made in rxrpc_recvmsg() to the I/O thread. This means that, thenceforth, only the I/O thread does this and the call state lock can be removed. This requires the Rx phase to be ended when the last packet is received, not when it is processed. Since this now changes the rxrpc call state to SUCCEEDED before we've consumed all the data from it, rxrpc_kernel_check_life() mustn't say the call is dead until the recvmsg queue is empty (unless the call has failed). Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org
2023-01-06rxrpc: Move call state changes from sendmsg to I/O threadDavid Howells3-60/+63
Move all the call state changes that are made in rxrpc_sendmsg() to the I/O thread. This is a step towards removing the call state lock. This requires the switch to the RXRPC_CALL_CLIENT_AWAIT_REPLY and RXRPC_CALL_SERVER_SEND_REPLY states to be done when the last packet is decanted from ->tx_sendmsg to ->tx_buffer in the I/O thread, not when it is added to ->tx_sendmsg by sendmsg(). Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org
2023-01-06rxrpc: Wrap accesses to get call state to put the barrier in one placeDavid Howells5-24/+38
Wrap accesses to get the state of a call from outside of the I/O thread in a single place so that the barrier needed to order wrt the error code and abort code is in just that place. Also use a barrier when setting the call state and again when reading the call state such that the auxiliary completion info (error code, abort code) can be read without taking a read lock on the call state lock. Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org
2023-01-06rxrpc: Split out the call state changing functions into their own fileDavid Howells4-89/+108
Split out the functions that change the state of an rxrpc call into their own file. The idea being to remove anything to do with changing the state of a call directly from the rxrpc sendmsg() and recvmsg() paths and have all that done in the I/O thread only, with the ultimate aim of removing the state lock entirely. Moving the code out of sendmsg.c and recvmsg.c makes that easier to manage. Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org
2023-01-06rxrpc: Set up a connection bundle from a call, not rxrpc_conn_parametersDavid Howells7-75/+76
Use the information now stored in struct rxrpc_call to configure the connection bundle and thence the connection, rather than using the rxrpc_conn_parameters struct. Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org
2023-01-06rxrpc: Offload the completion of service conn security to the I/O threadDavid Howells4-14/+40
Offload the completion of the challenge/response cycle on a service connection to the I/O thread. After the RESPONSE packet has been successfully decrypted and verified by the work queue, offloading the changing of the call states to the I/O thread makes iteration over the conn's channel list simpler. Do this by marking the RESPONSE skbuff and putting it onto the receive queue for the I/O thread to collect. We put it on the front of the queue as we've already received the packet for it. Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org
2023-01-06rxrpc: Make the set of connection IDs per local endpointDavid Howells5-38/+35
Make the set of connection IDs per local endpoint so that endpoints don't cause each other's connections to get dismissed. Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org
2023-01-06rxrpc: Tidy up abort generation infrastructureDavid Howells17-444/+484
Tidy up the abort generation infrastructure in the following ways: (1) Create an enum and string mapping table to list the reasons an abort might be generated in tracing. (2) Replace the 3-char string with the values from (1) in the places that use that to log the abort source. This gets rid of a memcpy() in the tracepoint. (3) Subsume the rxrpc_rx_eproto tracepoint with the rxrpc_abort tracepoint and use values from (1) to indicate the trace reason. (4) Always make a call to an abort function at the point of the abort rather than stashing the values into variables and using goto to get to a place where it reported. The C optimiser will collapse the calls together as appropriate. The abort functions return a value that can be returned directly if appropriate. Note that this extends into afs also at the points where that generates an abort. To aid with this, the afs sources need to #define RXRPC_TRACE_ONLY_DEFINE_ENUMS before including the rxrpc tracing header because they don't have access to the rxrpc internal structures that some of the tracepoints make use of. Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org
2023-01-06rxrpc: Clean up connection abortDavid Howells8-213/+188
Clean up connection abort, using the connection state_lock to gate access to change that state, and use an rxrpc_call_completion value to indicate the difference between local and remote aborts as these can be pasted directly into the call state. Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org
2023-01-06rxrpc: Implement a mechanism to send an event notification to a connectionDavid Howells6-9/+55
Provide a means by which an event notification can be sent to a connection through such that the I/O thread can pick it up and handle it rather than doing it in a separate workqueue. This is then used to move the deferred final ACK of a call into the I/O thread rather than a separate work queue as part of the drive to do all transmission from the I/O thread. Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org
2023-01-06rxrpc: Only disconnect calls in the I/O threadDavid Howells5-15/+9
Only perform call disconnection in the I/O thread to reduce the locking requirement. This is the first part of a fix for a race that exists between call connection and call disconnection whereby the data transmission code adds the call to the peer error distribution list after the call has been disconnected (say by the rxrpc socket getting closed). The fix is to complete the process of moving call connection, data transmission and call disconnection into the I/O thread and thus forcibly serialising them. Note that the issue may predate the overhaul to an I/O thread model that were included in the merge window for v6.2, but the timing is very much changed by the change given below. Fixes: cf37b5987508 ("rxrpc: Move DATA transmission into call processor work item") Reported-by: syzbot+c22650d2844392afdcfd@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org
2023-01-06rxrpc: Only set/transmit aborts in the I/O threadDavid Howells7-18/+50
Only set the abort call completion state in the I/O thread and only transmit ABORT packets from there. rxrpc_abort_call() can then be made to actually send the packet. Further, ABORT packets should only be sent if the call has been exposed to the network (ie. at least one attempted DATA transmission has occurred for it). Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org
2023-01-06rxrpc: Separate call retransmission from other conn eventsDavid Howells3-30/+8
Call the rxrpc_conn_retransmit_call() directly from rxrpc_input_packet() rather than calling it via connection event handling. Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org
2023-01-06rxrpc: Make the local endpoint hold a ref on a connected callDavid Howells4-13/+23
Make the local endpoint and it's I/O thread hold a reference on a connected call until that call is disconnected. Without this, we're reliant on either the AF_RXRPC socket to hold a ref (which is dropped when the call is released) or a queued work item to hold a ref (the work item is being replaced with the I/O thread). Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org
2023-01-06rxrpc: Stash the network namespace pointer in rxrpc_localDavid Howells5-23/+21
Stash the network namespace pointer in the rxrpc_local struct in addition to a pointer to the rxrpc-specific net namespace info. Use this to remove some places where the socket is passed as a parameter. Signed-off-by: David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org
2023-01-05net: usb: cdc_ether: add support for Thales Cinterion PLS62-W modemHui Wang1-0/+6
This modem has 7 interfaces, 5 of them are serial interfaces and are driven by cdc_acm, while 2 of them are wwan interfaces and are driven by cdc_ether: If 0: Abstract (modem) If 1: Abstract (modem) If 2: Abstract (modem) If 3: Abstract (modem) If 4: Abstract (modem) If 5: Ethernet Networking If 6: Ethernet Networking Without this change, the 2 network interfaces will be named to usb0 and usb1, our QA think the names are confusing and filed a bug on it. After applying this change, the name will be wwan0 and wwan1, and they could work well with modem manager. Signed-off-by: Hui Wang <hui.wang@canonical.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20230105034249.10433-1-hui.wang@canonical.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-05stmmac: dwmac-mediatek: remove the dwmac_fix_mac_speedBiao Huang1-26/+0
In current driver, MAC will always enable 2ns delay in RGMII mode, but that's not the correct usage. Remove the dwmac_fix_mac_speed() in driver, and recommend "rgmii-id" for phy-mode in device tree. Fixes: f2d356a6ab71 ("stmmac: dwmac-mediatek: add support for mt8195") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Biao Huang <biao.huang@mediatek.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-05Merge tag 'net-6.2-rc3' of ↵Linus Torvalds128-840/+1984
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bpf, wifi, and netfilter. Current release - regressions: - bpf: fix nullness propagation for reg to reg comparisons, avoid null-deref - inet: control sockets should not use current thread task_frag - bpf: always use maximal size for copy_array() - eth: bnxt_en: don't link netdev to a devlink port for VFs Current release - new code bugs: - rxrpc: fix a couple of potential use-after-frees - netfilter: conntrack: fix IPv6 exthdr error check - wifi: iwlwifi: fw: skip PPAG for JF, avoid FW crashes - eth: dsa: qca8k: various fixes for the in-band register access - eth: nfp: fix schedule in atomic context when sync mc address - eth: renesas: rswitch: fix getting mac address from device tree - mobile: ipa: use proper endpoint mask for suspend Previous releases - regressions: - tcp: add TIME_WAIT sockets in bhash2, fix regression caught by Jiri / python tests - net: tc: don't intepret cls results when asked to drop, fix oob-access - vrf: determine the dst using the original ifindex for multicast - eth: bnxt_en: - fix XDP RX path if BPF adjusted packet length - fix HDS (header placement) and jumbo thresholds for RX packets - eth: ice: xsk: do not use xdp_return_frame() on tx_buf->raw_buf, avoid memory corruptions Previous releases - always broken: - ulp: prevent ULP without clone op from entering the LISTEN status - veth: fix race with AF_XDP exposing old or uninitialized descriptors - bpf: - pull before calling skb_postpull_rcsum() (fix checksum support and avoid a WARN()) - fix panic due to wrong pageattr of im->image (when livepatch and kretfunc coexist) - keep a reference to the mm, in case the task is dead - mptcp: fix deadlock in fastopen error path - netfilter: - nf_tables: perform type checking for existing sets - nf_tables: honor set timeout and garbage collection updates - ipset: fix hash:net,port,net hang with /0 subnet - ipset: avoid hung task warning when adding/deleting entries - selftests: net: - fix cmsg_so_mark.sh test hang on non-x86 systems - fix the arp_ndisc_evict_nocarrier test for IPv6 - usb: rndis_host: secure rndis_query check against int overflow - eth: r8169: fix dmar pte write access during suspend/resume with WOL - eth: lan966x: fix configuration of the PCS - eth: sparx5: fix reading of the MAC address - eth: qed: allow sleep in qed_mcp_trace_dump() - eth: hns3: - fix interrupts re-initialization after VF FLR - fix handling of promisc when MAC addr table gets full - refine the handling for VF heartbeat - eth: mlx5: - properly handle ingress QinQ-tagged packets on VST - fix io_eq_size and event_eq_size params validation on big endian - fix RoCE setting at HCA level if not supported at all - don't turn CQE compression on by default for IPoIB - eth: ena: - fix toeplitz initial hash key value - account for the number of XDP-processed bytes in interface stats - fix rx_copybreak value update Misc: - ethtool: harden phy stat handling against buggy drivers - docs: netdev: convert maintainer's doc from FAQ to a normal document" * tag 'net-6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (112 commits) caif: fix memory leak in cfctrl_linkup_request() inet: control sockets should not use current thread task_frag net/ulp: prevent ULP without clone op from entering the LISTEN status qed: allow sleep in qed_mcp_trace_dump() MAINTAINERS: Update maintainers for ptp_vmw driver usb: rndis_host: Secure rndis_query check against int overflow net: dpaa: Fix dtsec check for PCS availability octeontx2-pf: Fix lmtst ID used in aura free drivers/net/bonding/bond_3ad: return when there's no aggregator netfilter: ipset: Rework long task execution when adding/deleting entries netfilter: ipset: fix hash:net,port,net hang with /0 subnet net: sparx5: Fix reading of the MAC address vxlan: Fix memory leaks in error path net: sched: htb: fix htb_classify() kernel-doc net: sched: cbq: dont intepret cls results when asked to drop net: sched: atm: dont intepret cls results when asked to drop dt-bindings: net: marvell,orion-mdio: Fix examples dt-bindings: net: sun8i-emac: Add phy-supply property net: ipa: use proper endpoint mask for suspend selftests: net: return non-zero for failures reported in arp_ndisc_evict_nocarrier ...
2023-01-05Merge tag 'gpio-fixes-for-v6.2-rc3' of ↵Linus Torvalds6-24/+43
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fixes from Bartosz Golaszewski: "A reference leak fix, two fixes for using uninitialized variables and more drivers converted to using immutable irqchips: - fix a reference leak in gpio-sifive - fix a potential use of an uninitialized variable in core gpiolib - fix a potential use of an uninitialized variable in gpio-pca953x - make GPIO irqchips immutable in gpio-pmic-eic-sprd, gpio-eic-sprd and gpio-sprd" * tag 'gpio-fixes-for-v6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpio: sifive: Fix refcount leak in sifive_gpio_probe gpio: sprd: Make the irqchip immutable gpio: pmic-eic-sprd: Make the irqchip immutable gpio: eic-sprd: Make the irqchip immutable gpio: pca953x: avoid to use uninitialized value pinctrl gpiolib: Fix using uninitialized lookup-flags on ACPI platforms
2023-01-05Merge tag 'fbdev-for-6.2-rc3' of ↵Linus Torvalds5-19/+25
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev Pull fbdev fixes from Helge Deller: - Fix Matrox G200eW initialization failure - Fix build failure of offb driver when built as module - Optimize stack usage in omapfb * tag 'fbdev-for-6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev: fbdev: omapfb: avoid stack overflow warning fbdev: matroxfb: G200eW: Increase max memory from 1 MB to 16 MB fbdev: atyfb: use strscpy() to instead of strncpy() fbdev: omapfb: use strscpy() to instead of strncpy() fbdev: make offb driver tristate
2023-01-05fbdev: omapfb: avoid stack overflow warningArnd Bergmann1-10/+18
The dsi_irq_stats structure is a little too big to fit on the stack of a 32-bit task, depending on the specific gcc options: fbdev/omap2/omapfb/dss/dsi.c: In function 'dsi_dump_dsidev_irqs': fbdev/omap2/omapfb/dss/dsi.c:1621:1: error: the frame size of 1064 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] Since this is only a debugfs file, performance is not critical, so just dynamically allocate it, and print an error message in there in place of a failure code when the allocation fails. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Helge Deller <deller@gmx.de>
2023-01-05caif: fix memory leak in cfctrl_linkup_request()Zhengchao Shao1-1/+5
When linktype is unknown or kzalloc failed in cfctrl_linkup_request(), pkt is not released. Add release process to error path. Fixes: b482cd2053e3 ("net-caif: add CAIF core protocol stack") Fixes: 8d545c8f958f ("caif: Disconnect without waiting for response") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20230104065146.1153009-1-shaozhengchao@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-01-04inet: control sockets should not use current thread task_fragEric Dumazet1-0/+1
Because ICMP handlers run from softirq contexts, they must not use current thread task_frag. Previously, all sockets allocated by inet_ctl_sock_create() would use the per-socket page fragment, with no chance of recursion. Fixes: 98123866fcf3 ("Treewide: Stop corrupting socket's task_frag") Reported-by: syzbot+bebc6f1acdf4cbb79b03@syzkaller.appspotmail.com Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Benjamin Coddington <bcodding@redhat.com> Acked-by: Guillaume Nault <gnault@redhat.com> Link: https://lore.kernel.org/r/20230103192736.454149-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-04net/ulp: prevent ULP without clone op from entering the LISTEN statusPaolo Abeni2-0/+18
When an ULP-enabled socket enters the LISTEN status, the listener ULP data pointer is copied inside the child/accepted sockets by sk_clone_lock(). The relevant ULP can take care of de-duplicating the context pointer via the clone() operation, but only MPTCP and SMC implement such op. Other ULPs may end-up with a double-free at socket disposal time. We can't simply clear the ULP data at clone time, as TLS replaces the socket ops with custom ones assuming a valid TLS ULP context is available. Instead completely prevent clone-less ULP sockets from entering the LISTEN status. Fixes: 734942cc4ea6 ("tcp: ULP infrastructure") Reported-by: slipper <slipper.alive@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/4b80c3d1dbe3d0ab072f80450c202d9bc88b4b03.1672740602.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-04qed: allow sleep in qed_mcp_trace_dump()Caleb Sander1-8/+20
By default, qed_mcp_cmd_and_union() delays 10us at a time in a loop that can run 500K times, so calls to qed_mcp_nvm_rd_cmd() may block the current thread for over 5s. We observed thread scheduling delays over 700ms in production, with stacktraces pointing to this code as the culprit. qed_mcp_trace_dump() is called from ethtool, so sleeping is permitted. It already can sleep in qed_mcp_halt(), which calls qed_mcp_cmd(). Add a "can sleep" parameter to qed_find_nvram_image() and qed_nvram_read() so they can sleep during qed_mcp_trace_dump(). qed_mcp_trace_get_meta_info() and qed_mcp_trace_read_meta(), called only by qed_mcp_trace_dump(), allow these functions to sleep. I can't tell if the other caller (qed_grc_dump_mcp_hw_dump()) can sleep, so keep b_can_sleep set to false when it calls these functions. An example stacktrace from a custom warning we added to the kernel showing a thread that has not scheduled despite long needing resched: [ 2745.362925,17] ------------[ cut here ]------------ [ 2745.362941,17] WARNING: CPU: 23 PID: 5640 at arch/x86/kernel/irq.c:233 do_IRQ+0x15e/0x1a0() [ 2745.362946,17] Thread not rescheduled for 744 ms after irq 99 [ 2745.362956,17] Modules linked in: ... [ 2745.363339,17] CPU: 23 PID: 5640 Comm: lldpd Tainted: P O 4.4.182+ #202104120910+6d1da174272d.61x [ 2745.363343,17] Hardware name: FOXCONN MercuryB/Quicksilver Controller, BIOS H11P1N09 07/08/2020 [ 2745.363346,17] 0000000000000000 ffff885ec07c3ed8 ffffffff8131eb2f ffff885ec07c3f20 [ 2745.363358,17] ffffffff81d14f64 ffff885ec07c3f10 ffffffff81072ac2 ffff88be98ed0000 [ 2745.363369,17] 0000000000000063 0000000000000174 0000000000000074 0000000000000000 [ 2745.363379,17] Call Trace: [ 2745.363382,17] <IRQ> [<ffffffff8131eb2f>] dump_stack+0x8e/0xcf [ 2745.363393,17] [<ffffffff81072ac2>] warn_slowpath_common+0x82/0xc0 [ 2745.363398,17] [<ffffffff81072b4c>] warn_slowpath_fmt+0x4c/0x50 [ 2745.363404,17] [<ffffffff810d5a8e>] ? rcu_irq_exit+0xae/0xc0 [ 2745.363408,17] [<ffffffff817c99fe>] do_IRQ+0x15e/0x1a0 [ 2745.363413,17] [<ffffffff817c7ac9>] common_interrupt+0x89/0x89 [ 2745.363416,17] <EOI> [<ffffffff8132aa74>] ? delay_tsc+0x24/0x50 [ 2745.363425,17] [<ffffffff8132aa04>] __udelay+0x34/0x40 [ 2745.363457,17] [<ffffffffa04d45ff>] qed_mcp_cmd_and_union+0x36f/0x7d0 [qed] [ 2745.363473,17] [<ffffffffa04d5ced>] qed_mcp_nvm_rd_cmd+0x4d/0x90 [qed] [ 2745.363490,17] [<ffffffffa04e1dc7>] qed_mcp_trace_dump+0x4a7/0x630 [qed] [ 2745.363504,17] [<ffffffffa04e2556>] ? qed_fw_asserts_dump+0x1d6/0x1f0 [qed] [ 2745.363520,17] [<ffffffffa04e4ea7>] qed_dbg_mcp_trace_get_dump_buf_size+0x37/0x80 [qed] [ 2745.363536,17] [<ffffffffa04ea881>] qed_dbg_feature_size+0x61/0xa0 [qed] [ 2745.363551,17] [<ffffffffa04eb427>] qed_dbg_all_data_size+0x247/0x260 [qed] [ 2745.363560,17] [<ffffffffa0482c10>] qede_get_regs_len+0x30/0x40 [qede] [ 2745.363566,17] [<ffffffff816c9783>] ethtool_get_drvinfo+0xe3/0x190 [ 2745.363570,17] [<ffffffff816cc152>] dev_ethtool+0x1362/0x2140 [ 2745.363575,17] [<ffffffff8109bcc6>] ? finish_task_switch+0x76/0x260 [ 2745.363580,17] [<ffffffff817c2116>] ? __schedule+0x3c6/0x9d0 [ 2745.363585,17] [<ffffffff810dbd50>] ? hrtimer_start_range_ns+0x1d0/0x370 [ 2745.363589,17] [<ffffffff816c1e5b>] ? dev_get_by_name_rcu+0x6b/0x90 [ 2745.363594,17] [<ffffffff816de6a8>] dev_ioctl+0xe8/0x710 [ 2745.363599,17] [<ffffffff816a58a8>] sock_do_ioctl+0x48/0x60 [ 2745.363603,17] [<ffffffff816a5d87>] sock_ioctl+0x1c7/0x280 [ 2745.363608,17] [<ffffffff8111f393>] ? seccomp_phase1+0x83/0x220 [ 2745.363612,17] [<ffffffff811e3503>] do_vfs_ioctl+0x2b3/0x4e0 [ 2745.363616,17] [<ffffffff811e3771>] SyS_ioctl+0x41/0x70 [ 2745.363619,17] [<ffffffff817c6ffe>] entry_SYSCALL_64_fastpath+0x1e/0x79 [ 2745.363622,17] ---[ end trace f6954aa440266421 ]--- Fixes: c965db4446291 ("qed: Add support for debug data collection") Signed-off-by: Caleb Sander <csander@purestorage.com> Acked-by: Alok Prasad <palok@marvell.com> Link: https://lore.kernel.org/r/20230103233021.1457646-1-csander@purestorage.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-04Merge tag 'for-netdev' of ↵Jakub Kicinski5-18/+112
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Alexei Starovoitov says: ==================== bpf 2023-01-04 We've added 5 non-merge commits during the last 8 day(s) which contain a total of 5 files changed, 112 insertions(+), 18 deletions(-). The main changes are: 1) Always use maximal size for copy_array in the verifier to fix KASAN tracking, from Kees. 2) Fix bpf task iterator walking through dead tasks, from Kui-Feng. 3) Make sure livepatch and bpf fexit can coexist, from Chuang. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf: Always use maximal size for copy_array() selftests/bpf: add a test for iter/task_vma for short-lived processes bpf: keep a reference to the mm, in case the task is dead. selftests/bpf: Temporarily disable part of btf_dump:var_data test. bpf: Fix panic due to wrong pageattr of im->image ==================== Link: https://lore.kernel.org/r/20230104215500.79435-1-alexei.starovoitov@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-01-04Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds23-163/+173
Pull virtio updates from Michael Tsirkin: "Mostly fixes all over the place, a couple of cleanups" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (32 commits) virtio_blk: Fix signedness bug in virtblk_prep_rq() vdpa_sim_net: should not drop the multicast/broadcast packet vdpasim: fix memory leak when freeing IOTLBs vdpa: conditionally fill max max queue pair for stats vdpa/vp_vdpa: fix kfree a wrong pointer in vp_vdpa_remove vduse: Validate vq_num in vduse_validate_config() tools/virtio: remove smp_read_barrier_depends() tools/virtio: remove stray characters vhost_vdpa: fix the crash in unmap a large memory virtio: Implementing attribute show with sysfs_emit virtio-crypto: fix memory leak in virtio_crypto_alg_skcipher_close_session() tools/virtio: Variable type completion vdpa_sim: fix vringh initialization in vdpasim_queue_ready() virtio_blk: use UINT_MAX instead of -1U vhost-vdpa: fix an iotlb memory leak vhost: fix range used in translate_desc() vringh: fix range used in iotlb_translate() vhost/vsock: Fix error handling in vhost_vsock_init() vdpa_sim: fix possible memory leak in vdpasim_net_init() and vdpasim_blk_init() tools: Delete the unneeded semicolon after curly braces ...
2023-01-04Merge tag 'x86-urgent-2023-01-04' of ↵Linus Torvalds7-45/+45
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull misc x86 fixes from Ingo Molnar: "Fix a double-free bug, a binutils warning, a header namespace clash and a bug in ib_prctl_set()" * tag 'x86-urgent-2023-01-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/bugs: Flush IBP in ib_prctl_set() x86/insn: Avoid namespace clash by separating instruction decoder MMIO type from MMIO trace type x86/asm: Fix an assembler warning with current binutils x86/kexec: Fix double-free of elf header buffer
2023-01-04Merge tag 'f2fs-fix-6.2-rc3' of ↵Linus Torvalds4-26/+25
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs Pull f2fs fixes from Jaegeuk Kim: - fix a null pointer dereference in f2fs_issue_flush, which occurs by the combination of mount/remount options. - fix a bug in per-block age-based extent_cache newly introduced in 6.2-rc1, which reported a wrong age information in extent_cache. - fix a kernel panic if extent_tree was not created, which was caught by a wrong BUG_ON * tag 'f2fs-fix-6.2-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: f2fs: let's avoid panic if extent_tree is not created f2fs: should use a temp extent_info for lookup f2fs: don't mix to use union values in extent_info f2fs: initialize extent_cache parameter f2fs: fix to avoid NULL pointer dereference in f2fs_issue_flush()
2023-01-04Merge tag 'nfsd-6.2-2' of ↵Linus Torvalds2-1/+12
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux Pull nfsd fixes from Chuck Lever: - Fix a filecache UAF during NFSD shutdown - Avoid exposing automounted mounts on NFS re-exports * tag 'nfsd-6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: nfsd: fix handling of readdir in v4root vs. mount upcall timeout nfsd: shut down the NFSv4 state objects before the filecache
2023-01-04x86/bugs: Flush IBP in ib_prctl_set()Rodrigo Branco1-0/+2
We missed the window between the TIF flag update and the next reschedule. Signed-off-by: Rodrigo Branco <bsdaemon@google.com> Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: <stable@vger.kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-01 01:09:23 +0000