summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2017-08-31pinctrl: intel: Read back TX buffer stateAndy Shevchenko1-1/+6
In the same way as it's done in pinctrl-cherryview.c we would provide a readback TX buffer state. Fixes: 17fab473693 ("pinctrl: intel: Set pin direction properly") Reported-by: "Bourque, Francis" <francis.bourque@intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: "Bourque, Francis" <francis.bourque@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-31pinctrl: rockchip: Add rv1108 recalculated iomux supportDavid Wu1-1/+67
The pins from GPIO1A0 to GPIO1B1 are special, need to recalculate iomux. And the register offset is larger than the u8 range, so changed to u32. Signed-off-by: David Wu <david.wu@rock-chips.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-31pinctrl: intel: Decrease indentation in intel_gpio_set()Andy Shevchenko1-12/+12
Decrease indentation in intel_gpio_set() to make it looking slightly better and be in align with intel_gpio_get(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-31pinctrl: rza1: Remove suffix from gpiochip labelJacopo Mondi1-2/+2
The OF node name already contains the gpio chip identifier, no need to append it when creating the label. The following debug message clearly shows the suffix is not required "pinctrl-rza1 fcfe3000.pin-controller: Parsed gpiochip gpio-0-0 with 6 pins" Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-31pinctrl: qcom: spmi-gpio: Correct power_source range checkFenglin Wu1-1/+1
Power source selection in DIG_VIN_CTL is indexed from 0, in the range check it shouldn't be equal to the total number of power sources. Signed-off-by: Fenglin Wu <fenglinw@codeaurora.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-31pinctrl: freescale: make mxs_regs constBhumika Goyal2-2/+2
Make these const as they are only stored in the const field of a mxs_pinctrl_soc_data structure. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-31pinctrl: aspeed: Rework strap register write logic for the AST2500Andrew Jeffery1-10/+16
Yong Li found that writes to the AST2500 strapping register were not properly supported by the Aspeed pinctrl core and provided a patch to rectify the problem. Several revisions of the patch were posted and ultimately v4 should have been applied, however some unfortunate liberal application of tags on my part lead to confusion between v3[1] and v4[2]. Generate the diff between v3 and v4 to apply as a fixup patch. [1] http://patchwork.ozlabs.org/patch/801662/ [2] http://patchwork.ozlabs.org/patch/802946/ Cc: Yong Li <sdliyong@gmail.com> Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-31pinctrl: rza1: off by one in rza1_parse_gpiochip()Dan Carpenter1-1/+1
The rza1_pctl->ports[] array has RZA1_NPORTS (12) elements. The > here should be >= to prevent an out of bounds access. Fixes: 5a49b644b307 ("pinctrl: Renesas RZ/A1 pin and gpio controller") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-31pinctrl: qcom: General Purpose clocks for apq8064Vinay Simha BN2-7/+38
Add support for general purpose (GP) clocks for apq8064 DT binding documentation updated for qcom,apq8064-pinctrl general purpose (GP) clocks. Signed-off-by: Vinay Simha BN <simhavcs@gmail.com> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-31pinctrl: sprd: Add Spreadtrum pin control driverBaolin Wang7-0/+2173
This patch adds the pin control driver for Spreadtrum SC9860 platform. Signed-off-by: Baolin Wang <baolin.wang@spreadtrum.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-31dt-bindings: pinctrl: Add DT bindings for Spreadtrum SC9860Baolin Wang2-0/+153
This patch adds the binding documentation for Spreadtrum SC9860 pin controller device. Signed-off-by: Baolin Wang <baolin.wang@spreadtrum.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-31pinctrl: Add sleep related state to indicate sleep related configsBaolin Wang3-0/+6
In some scenarios, we should set some pins as input/output/pullup/pulldown when the specified system goes into deep sleep mode, then when the system goes into deep sleep mode, these pins will be set automatically by hardware. That means some pins are not controlled by any specific driver in the OS, but need to be controlled when entering sleep mode. Thus we introduce one sleep state config into pinconf-generic for users to configure. Signed-off-by: Baolin Wang <baolin.wang@spreadtrum.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-31pinctrl: mediatek: update PCIe mux data for MT7623Ryder Lee1-0/+12
MT2701 shares the same driver with MT7623, but there is a slight difference between their pin functions (e.g., PCIe), so we update the different parts in pinmux table. Doing so, SoC could choose the correct mux setting via their own pinfun.h. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> Cc: Biao Huang <biao.huang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-22pinctrl: intel: Add Intel Lewisburg GPIO supportMika Westerberg3-0/+352
Intel Lewisburg has the same GPIO hardware than Intel Sunrisepoint-H except few differences in register offsets and pin lists. Because of this we add a separate pinctrl driver for Lewisburg. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-22pinctrl: intel: Add Intel Cannon Lake PCH-H pin controller supportMika Westerberg1-1/+423
This is desktop version Intel Cannon Lake PCH. The GPIO hardware is the same but pin list differs a bit. Add support for this to the existing Cannon Lake pin controller driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-22Merge tag 'sh-pfc-for-v4.14-tag1' of ↵Linus Walleij10-122/+2978
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel pinctrl: sh-pfc: Updates for v4.14 - Propagate errors on group config, now r8a7740-armadillo800eva.dts is fixed, - Add MSIOF and USB2.0 pin groups on R-Car H3 ES2.0, - Add USB2.0 and USB3.0 pin groups on R-Car M3-W, - Add a missing MMC pin group on R-Car M2-W and RZ/G1M, - Add initial support for R-Car D3, - Small fixes and cleanups.
2017-08-22pinctrl: aspeed: Fix ast2500 strap register write logicYong Li2-2/+18
On AST2500, the hardware strap register(SCU70) only accepts write ‘1’, to clear it to ‘0’, must set bits(write ‘1’) to SCU7C Signed-off-by: Yong Li <sdliyong@gmail.com> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Tested-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-22pinctrl: sunxi: fix wrong irq_banks number for H5 pinctrlIcenowy Zheng1-3/+23
The pin controller of Allwinner H5 has three IRQ banks, however in old versions of drivers and device trees, only two are set, which makes PG bank IRQ not available. If it's directly set to 3, the old device trees will fail to boot. Add a workaround (and a warning) for older device trees, and allow new device trees to use correct 3 IRQ banks. Fixes: 838adb576d4a ("drivers: pinctrl: add driver for Allwinner H5 SoC") Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-22pinctrl: intel: Disable GPIO pin interrupts in suspendRushikesh S Kadam1-0/+1
The fix prevents unintended wakes from second level GPIO pin interrupts. On some Intel Kabylake platforms, it is observed that GPIO pin interrupts can wake the platform from suspend-to-idle, even though the IRQ is not configured as IRQF_NO_SUSPEND or enable_irq_wake(). This can cause undesired wakes on Mobile devices such as Laptops and Chromebook devices. For example a headset jack insertion is not a desired wake source on Chromebook devices. The pinctrl-intel (GPIO controller) driver implements a "Shared IRQ" model. All GPIO pin interrupts are OR'ed and mapped to a first level IRQ14 (or IRQ15). The driver registers an irq_chip struct and maps an irq_domain for the GPIO pin interrupts. The IRQ14 handler demuxes and calls the second level IRQ for the respective pin. In the suspend entry flow, at suspend_noirq stage, the kernel disables IRQs that are not marked for wake. The pinctrl-intel driver does not implement a irq_disable() callback (to take advantage of lazy disabling). The pinctrl-intel GPIO interrupts are not disabled in hardware during suspend entry, and thus are able to wake the SoC out of suspend-to-idle. This patch sets the IRQCHIP_MASK_ON_SUSPEND flag for the GPIO irq_chip, to disable the second level interrupts at suspend_noirq stage via the irq_mask callbacks. The irq_mask callback disables the IRQs in hardware by programming the corresponding GPIO pad registers. Only IRQs that are not marked for wake are disabled. Signed-off-by: Rushikesh S Kadam <rushikesh.s.kadam@intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-and-tested-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-22pinctrl: vt8500: constify pinconf_ops, pinctrl_ops, and pinmux_ops structuresJulia Lawall1-3/+3
These structures are only stored in fields of a pinctrl_desc structure (confops, pctlops, and pmxops) that are const. Make the structures const as well. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-22pinctrl: ti-iodelay: constify pinconf_ops, pinctrl_ops, and pinmux_ops ↵Julia Lawall1-2/+2
structures These structures are only stored in fields of a pinctrl_desc structure (confops and pctlops) that are const. Make the structures const as well. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-22pinctrl: tz1090: constify pinconf_ops, pinctrl_ops, and pinmux_ops structuresJulia Lawall1-3/+3
These structures are only stored in fields of a pinctrl_desc structure (confops, pctlops, and pmxops) that are const. Make the structures const as well. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-22pinctrl: tz1090-pdc: constify pinconf_ops, pinctrl_ops, and pinmux_ops ↵Julia Lawall1-3/+3
structures These structures are only stored in fields of a pinctrl_desc structure (confops, pctlops, and pmxops) that are const. Make the structures const as well. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-22pinctrl: tb10x: constify pinconf_ops, pinctrl_ops, and pinmux_ops structuresJulia Lawall1-2/+2
These structures are only stored in fields of a pinctrl_desc structure (pctlops and pmxops) that are const. Make the structures const as well. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-22pinctrl: rza1: constify pinconf_ops, pinctrl_ops, and pinmux_ops structuresJulia Lawall1-1/+1
This pinmux_ops structure is only stored in the const pmxops field of a pinctrl_desc structure. Make the pinmux_ops structure const as well. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-22pinctrl: ingenic: constify pinconf_ops, pinctrl_ops, and pinmux_ops structuresJulia Lawall1-3/+3
These structures are only stored in fields of a pinctrl_desc structure (confops, pctlops, and pmxops) that are const. Make the structures const as well. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-22pinctrl: adi2: constify pinconf_ops, pinctrl_ops, and pinmux_ops structuresJulia Lawall1-2/+2
These structures are only stored in fields of a pinctrl_desc structure (pctlops and pmxops) that are const. Make the structures const as well. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-22pinctrl: aspeed: g5: constify pinconf_ops, pinctrl_ops, and pinmux_ops ↵Julia Lawall1-3/+3
structures These structures are only stored in fields of a pinctrl_desc structure (confops, pctlops, and pmxops) that are const. Make the structures const as well. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-22pinctrl: aspeed: g4: constify pinconf_ops, pinctrl_ops, and pinmux_ops ↵Julia Lawall1-2/+2
structures These structures are only stored in fields of a pinctrl_desc structure (pctlops, and pmxops) that are const. Make the structures const as well. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-22pinctrl: digicolor: constify pinconf_ops, pinctrl_ops, and pinmux_ops structuresJulia Lawall1-2/+2
These structures are only stored in fields of a pinctrl_desc structure (pctlops and pmxops) that are const. Make the structures const as well. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-22pinctrl: sirf: constify pinconf_ops, pinctrl_ops, and pinmux_ops structuresJulia Lawall1-2/+2
These structures are only stored in fields of a pinctrl_desc structure (pctlops and pmxops) that are const. Make the structures const as well. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-22pinctrl: sirf: atlas7: constify pinconf_ops, pinctrl_ops, and pinmux_ops ↵Julia Lawall1-1/+1
structures This pinmux_ops structure is only stored in the const pmxops field of a pinctrl_desc structure. Make the pinmux_ops structure const as well. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-22pinctrl: st: constify pinconf_ops, pinctrl_ops, and pinmux_ops structuresJulia Lawall1-3/+3
These structures are only stored in fields of a pinctrl_desc structure (confops, pctlops, and pmxops) that are const. Make the structures const as well. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-22pinctrl: armada-37xx: constify pinconf_ops, pinctrl_ops, and pinmux_ops ↵Julia Lawall1-1/+1
structures This pinconf_ops structure is only stored in the const pinconf_ops field of a pinctrl_desc structure. Make the pinconf_ops structure const as well. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-22pinctrl: artpec6: constify pinconf_ops, pinctrl_ops, and pinmux_ops structuresJulia Lawall1-1/+1
This pinctrl_ops structure is only stored in the const pctlops field of a pinctrl_desc structure. Make the pinctrl_ops structure const as well. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Lars Persson <lars.persson@axis.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-22pinctrl: bcm281xx: constify pinconf_ops, pinctrl_ops, and pinmux_ops structuresJulia Lawall1-1/+1
This pinconf_ops structure is only stored in the const confops field of a pinctrl_desc structure. Make the pinconf_ops structure const as well. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-22pinctrl: uniphier: add Audio out pin-mux settingsKatsuhiro Suzuki2-0/+10
The UniPhier LD11/20 SoC audio core use following 8 pins: AO1IEC, AO1ARC, AO1DACCK, AO1BCK, AO1LRCK, AO1D[0-2] Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-22pinctrl: amd: fix error return code in amd_gpio_probe()Gustavo A. R. Silva1-2/+2
platform_get_irq() returns an error code, but the pinctrl-amd driver ignores it and always returns -EINVAL. This is not correct and, prevents -EPROBE_DEFER from being propagated properly. Print and propagate the return value of platform_get_irq on failure. This issue was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-18MAINTAINERS: Update the Gemini maintainer listLinus Walleij1-0/+5
This patch: - Adds myself as comaintainer for the Gemini. - Adds the Gemini main bindings to the file list. - Adds the pin controller plus bindings to the Gemini file list. - Fixes up the path of the RTC binding and driver. Acked-by: Hans Ulli Kroll <ulli.kroll@googlemail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-16pinctrl: sh-pfc: r8a77995: Add voltage switch operations for MMCTakeshi Kihara1-1/+18
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-08-16pinctrl: sh-pfc: r8a77995: Add MMC pins, groups and functionsTakeshi Kihara1-0/+50
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-08-16pinctrl: sh-pfc: r8a77995: Add I2C pins, groups and functionsTakeshi Kihara1-0/+71
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-08-16pinctrl: sh-pfc: r8a77995: Add SCIF pins, groups and functionsTakeshi Kihara1-0/+262
This patch adds SCIF{0,1,2,3,4,5} pins, groups and functions to R8A77995 SoC. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> [geert: Fix swapped RX3_B and SCK3_B pins] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-08-16pinctrl: sh-pfc: Initial R8A77995 PFC supportTakeshi Kihara6-0/+1426
This patch adds initial pinctrl driver to support for the R8A77995 SoC. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> [geert: whitespace] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-08-16pinctrl: sh-pfc: Add PORT_GP_{10,2[01]} helper macrosYoshihiro Shimoda1-5/+17
This follows the style of existion PORT_GP_X macros and will be used by a follow-up patch for the r8a77995 SoC. Extracted from the initial r8a77995 patch in the BSP by Takeshi Kihara. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-08-16pinctrl: sh-pfc: r8a7796: Add USB3.0 host pins, groups and functionsTakeshi Kihara1-0/+15
This patch adds USB30 (USB3.0 host) pin, group and function to R8A7796 SoC. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-08-16pinctrl: sh-pfc: r8a7796: Add USB2.0 host pins, groups and functionsTakeshi Kihara1-0/+29
This patch adds USB{0,1} (USB2.0 host) pins, groups and functions to R8A7796 SoC. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-08-16pinctrl: sh-pfc: r8a7795: Fix to reserved MOD_SEL2 bit22Takeshi Kihara1-9/+9
This is a correction because MOD_SEL register specification for R8A7795 ES2.0 SoC was changed in R-Car Gen3 Hardware User's Manual Rev.0.54E. Fixes: b205914c8f822ef2 ("pinctrl: sh-pfc: r8a7795: Add support for R-Car H3 ES2.0") Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-08-16pinctrl: sh-pfc: r8a7795: Rename CS1# pin function definitionsTakeshi Kihara1-4/+4
This patch renames the pin function macro definitions of the GPSR1 and IPSR4 registers value for the CS1# pin. This is a correction because GPSR and IPSR register specification for R8A7795 ES2.0 SoC was changed in R-Car Gen3 Hardware User's Manual Rev.0.54E. Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2017-08-16pinctrl: sh-pfc: r8a7795: Fix to delete FSCLKST pin and IPSR7 bit[15:12] ↵Takeshi Kihara1-5/+2
register definitions This patch fixes the macro definitions of FSCLKST pins function and IPSR7 bit[15:12] register deleted. This is a correction because IPSR register specification for R8A7795 ES2.0 SoC was changed in R-Car Gen3 Hardware User's Manual Rev.0.53E or later. Fixes: b205914c8f822ef2 ("pinctrl: sh-pfc: r8a7795: Add support for R-Car H3 ES2.0") Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-12 04:58:00 +0000