summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2019-06-11Input: imx_keypad - make sure keyboard can always wake up systemAnson Huang1-4/+14
There are several scenarios that keyboard can NOT wake up system from suspend, e.g., if a keyboard is depressed between system device suspend phase and device noirq suspend phase, the keyboard ISR will be called and both keyboard depress and release interrupts will be disabled, then keyboard will no longer be able to wake up system. Another scenario would be, if a keyboard is kept depressed, and then system goes into suspend, the expected behavior would be when keyboard is released, system will be waked up, but current implementation can NOT achieve that, because both depress and release interrupts are disabled in ISR, and the event check is still in progress. To fix these issues, need to make sure keyboard's depress or release interrupt is enabled after noirq device suspend phase, this patch moves the suspend/resume callback to noirq suspend/resume phase, and enable the corresponding interrupt according to current keyboard status. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-06-09Input: iqs5xx - get axis info before calling input_mt_init_slots()Jeff LaBundy1-11/+13
Calling input_mt_init_slots() copies ABS_MT_POSITION_X to ABS_X and so on, but doing so before calling touchscreen_parse_properties() leaves ABS_X min = max = 0 which may prompt an X server to ignore the device. To solve this problem, wait to call input_mt_init_slots() until all absolute axis information has been resolved (whether that's through device tree via touchscreen_parse_properties() or from reading from the device directly). Signed-off-by: Jeff LaBundy <jeff@labundy.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-05-23Input: uinput - add compat ioctl number translation for UI_*_FF_UPLOADAndrey Smirnov1-2/+20
In the case of compat syscall ioctl numbers for UI_BEGIN_FF_UPLOAD and UI_END_FF_UPLOAD need to be adjusted before being passed on uinput_ioctl_handler() since code built with -m32 will be passing slightly different values. Extend the code already covering UI_SET_PHYS to cover UI_BEGIN_FF_UPLOAD and UI_END_FF_UPLOAD as well. Reported-by: Pierre-Loup A. Griffais <pgriffais@valvesoftware.com> Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-05-23Input: silead - add MSSL0017 to acpi_device_idDaniel Smith1-0/+1
On Chuwi Hi10 Plus, the Silead device id is MSSL0017. Signed-off-by: Daniel Smith <danct12@disroot.org> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-05-20Input: elantech - enable middle button support on 2 ThinkPadsAaron Ma1-0/+2
Adding 2 new touchpad PNPIDs to enable middle button support. Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-05-15Input: elan_i2c - increment wakeup count if wake sourceRavi Chandra Sadineni1-0/+2
Notify the PM core that this device is the wake source. This helps userspace daemon tracking the wake sources to identify the origin of the wake. Signed-off-by: Ravi Chandra Sadineni <ravisadineni@chromium.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-05-10Merge branch 'next' into for-linusDmitry Torokhov30-74/+2297
Prepare input updates for 5.2 merge window.
2019-05-07Input: libps2 - mark expected switch fall-throughGustavo A. R. Silva1-0/+1
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warning: drivers/input/serio/libps2.c: In function ‘ps2_handle_ack’: drivers/input/serio/libps2.c:407:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (ps2dev->flags & PS2_FLAG_NAK) { ^ drivers/input/serio/libps2.c:417:2: note: here case 0x00: ^~~~ Warning level 3 was used: -Wimplicit-fallthrough=3 This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-05-07Input: qt1050 - add Microchip AT42QT1050 supportMarco Felsch4-0/+688
Add initial support for the AT42QT1050 (QT1050) device. The device supports up to five input keys, dependent on the mode. Since it adds only the initial support, the "1 to 4 keys plus Guard Channel" mode isn't supported. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-04-30Input: add support for Azoteq IQS550/572/525Jeff LaBundy5-0/+1225
This patch adds support for the Azoteq IQS550/572/525 family of trackpad/touchscreen controllers. The driver has been tested with an IQS550EV02 evaluation board. A demonstration of the driver's capabilities is available here: https://youtu.be/sRNNx4XZBts Signed-off-by: Jeff LaBundy <jeff@labundy.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-04-30Input: add a driver for GPIO controllable vibratorsLuca Weiss4-0/+257
Provide a simple driver for GPIO controllable vibrators. It will be used by the Fairphone 2. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-04-26Input: synaptics-rmi4 - write config register values to the right offsetLucas Stach1-1/+1
Currently any changed config register values don't take effect, as the function to write them back is called with the wrong register offset. Fixes: ff8f83708b3e (Input: synaptics-rmi4 - add support for 2D sensors and F11) Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-04-26Input: synaptics-rmi4 - fix enum_fmtPhilipp Zabel1-15/+5
Do not enumerate all formats, some of which the device may not even support. Instead, only report the one fixed format of the currently selected input that will survive try_fmt/s_fmt. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-04-26Input: synaptics-rmi4 - fill initial formatPhilipp Zabel1-0/+1
The driver doesn't set an initial video format until s_input is called: $ v4l2-ctl -d /dev/v4l-touch0 --get-input Video input : 0 (Normalized 16-Bit Image: ok) $ v4l2-ctl -d /dev/v4l-touch0 --get-fmt-video Width/Height : 0/0 Pixel Format : '' [...] $ v4l2-ctl -d /dev/v4l-touch0 --set-input 0 Video input set to 0 (Normalized 16-Bit Image: Touch, ok) $ v4l2-ctl -d /dev/v4l-touch0 --get-fmt-video Width/Height : 71/40 Pixel Format : 'TD16' [...] To fix this, initialize the video format to input 0 during probe. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-04-26HID: input: add mapping for KEY_KBD_LAYOUT_NEXTDmitry Torokhov1-0/+2
HUTRR56 defined a new usage code on consumer page to cycle through set of keyboard layouts, let's add this mapping. Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-04-26Input: add KEY_KBD_LAYOUT_NEXTDmitry Torokhov1-0/+1
The HID usage tables define a key to cycle through a set of keyboard layouts, let's add corresponding keycode. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-04-24Input: synaptics-rmi4 - fix possible double freePan Bian1-5/+1
The RMI4 function structure has been released in rmi_register_function if error occurs. However, it will be released again in the function rmi_create_function, which may result in a double-free bug. Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-04-24Input: snvs_pwrkey - make it depend on ARCH_MXCJacky Bai1-1/+1
The SNVS power key is not only used on i.MX6SX and i.MX7D, it is also used by i.MX6UL and NXP's latest ARMv8 based i.MX8M series SOC. So update the config dependency to use ARCH_MXC, and add the COMPILE_TEST too. Signed-off-by: Jacky Bai <ping.bai@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-04-23Input: hyperv-keyboard - add module descriptionJoseph Salisbury1-0/+2
Signed-off-by: Joseph Salisbury <joseph.salisbury@microsoft.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-04-23Input: olpc_apsp - depend on ARCH_MMPJean Delvare1-0/+1
The OLPC XO-1.75 and XO-4 are ARM-based laptops, using the Marvell MMP architecture, so don't present this driver on other architectures except for build-testing purposes. Signed-off-by: Jean Delvare <jdelvare@suse.de> Reviewed-by: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-04-04Input: sun4i-a10-lradc-keys - add support for A83TZiping Chen2-6/+38
Allwinner A83T SoC has a low res adc like the one in Allwinner A10 SoC, however, the A10 SoC's vref of lradc internally is divided by 2/3 and the A83T SoC's vref of lradc internally is divided by 3/4, thus add a hardware variant for it to be compatible with various devices. Signed-off-by: Ziping Chen <techping.chan@gmail.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-04-04Input: snvs_pwrkey - use dev_pm_set_wake_irq() to simplify codeAnson Huang1-26/+4
With calling dev_pm_set_wake_irq() to set SNVS ON/OFF button as wakeup source for suspend, generic wake irq mechanism will automatically enable it as wakeup source when suspend, then the enable_irq_wake()/disable_irq_wake() can be removed in suspend/resume callback, it simplifies the code. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-04-04Input: lpc32xx-key - add clocks property and fix DT binding exampleVladimir Zapolskiy1-1/+4
The keypad controller on NXP LPC32xx requires its clock gate to be open, therefore add description of the requires 'clocks' property. In addition adjust the example by adding description of required 'clocks' property and by fixing 'interrupts' property. Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-04-04Input: i8042 - signal wakeup from atkbd/psmouseDmitry Torokhov3-3/+4
Instead of signalling wakeup directly from i8042, let psmouse and atkbd drivers execute basic protocol handling and only then signal wakeup condition. This solves the issue where we increment wakeup counter simply because we are getting responses from keyboard/mouse to the commands we ourselves send to them as part of suspend transition. Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-04-03Input: snvs_pwrkey - initialize necessary driver data before enabling IRQAnson Huang1-3/+3
SNVS IRQ is requested before necessary driver data initialized, if there is a pending IRQ during driver probe phase, kernel NULL pointer panic will occur in IRQ handler. To avoid such scenario, just initialize necessary driver data before enabling IRQ. This patch is inspired by NXP's internal kernel tree. Fixes: d3dc6e232215 ("input: keyboard: imx: add snvs power key driver") Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-04-03Input: goodix - add GT5663 CTP supportJagan Teki2-0/+3
GT5663 is capacitive touch controller with customized smart wakeup gestures. Add support for it by adding compatible and supported chip data. The chip data on GT5663 is similar to GT1151, like - config data register has 0x8050 address - config data register max len is 240 - config data checksum has 16-bit Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-04-03Input: goodix - add regulators suppotJagan Teki2-0/+54
Goodix CTP controllers require AVDD28, VDDIO regulators for power-on sequence. The delay between these regualtor operations as per Power-on Timing from datasheet[1] is 0 (T1 >= 0 usec). So, enable and disable these regulators in proper order using normal regulator functions without any delay in between. [1] GT5663 Datasheet_English_20151106_Rev.01 Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-04-03Input: evdev - use struct_size() in kzalloc() and vzalloc()Gustavo A. R. Silva1-4/+3
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; struct boo entry[]; }; size = sizeof(struct foo) + count * sizeof(struct boo); instance = kzalloc(size, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL); Notice that, in this case, variable size is not necessary, hence it is removed. This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-03-26HID: input: add mapping for "Toggle Display" keyDmitry Torokhov1-0/+8
According to HUT 1.12 usage 0xb5 from the generic desktop page is reserved for switching between external and internal display, so let's add the mapping. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-03-26HID: input: add mapping for "Full Screen" keyDmitry Torokhov1-0/+1
According to HUT 1.12 usage 0x232 from the consumer page is reserved for switching application between full screen and windowed mode, so let's add the mapping. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-03-26HID: input: add mapping for keyboard Brightness Up/Down/Toggle keysDmitry Torokhov1-0/+4
According to HUTRR73 usages 0x79, 0x7a and 0x7c from the consumer page correspond to Brightness Up/Down/Toggle keys, so let's add the mappings. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-03-26HID: input: add mapping for Expose/Overview keyDmitry Torokhov1-0/+2
According to HUTRR77 usage 0x29f from the consumer page is reserved for the Desktop application to present all running user’s application windows. Linux defines KEY_SCALE to request Compiz Scale (Expose) mode, so let's add the mapping. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-03-26HID: input: fix mapping of aspect ratio keyDmitry Torokhov1-1/+1
According to HUTRR37 usage 0x6d from the consumer usage page corresponds to action that selects the next available supported aspect ratio option on a device which outputs or displays video. However KEY_ZOOM means activate "Full Screen" mode, KEY_ASPECT_RATIO should be used instead. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-03-26[media] doc-rst: switch to new names for Full Screen/Aspect keysDmitry Torokhov1-2/+2
We defined better names for keys to activate full screen mode or change aspect ratio (while keeping the existing keycodes to avoid breaking userspace), so let's use them in the document. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-03-26Input: document meanings of KEY_SCREEN and KEY_ZOOMDmitry Torokhov1-2/+4
It is hard to say what KEY_SCREEN and KEY_ZOOM mean, but historically DVB folks have used them to indicate switch to full screen mode. Later, they converged on using KEY_ZOOM to switch into full screen mode and KEY)SCREEN to control aspect ratio (see Documentation/media/uapi/rc/rc-tables.rst). Let's commit to these uses, and define: - KEY_FULL_SCREEN (and make KEY_ZOOM its alias) - KEY_ASPECT_RATIO (and make KEY_SCREEN its alias) Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-03-26Input: elan_i2c - add hardware ID for multiple Lenovo laptopsKT Liao1-0/+25
There are many Lenovo laptops which need elan_i2c support, this patch adds relevant IDs to the Elan driver so that touchpads are recognized. Signed-off-by: KT Liao <kt.liao@emc.com.tw> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-03-09Input: wacom_serial4 - add support for Wacom ArtPad II tabletJason Gerecke1-0/+2
Tablet initially begins communicating at 9600 baud, so this command should be used to connect to the device: $ inputattach --daemon --baud 9600 --wacom_iv /dev/ttyS0 https://github.com/linuxwacom/xf86-input-wacom/issues/40 Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-03-09Input: elan_i2c - add id for touchpad found in Lenovo s21e-20Vincent Batts1-0/+1
Lenovo s21e-20 uses ELAN0601 in its ACPI tables for the Elan touchpad. Signed-off-by: Vincent Batts <vbatts@hashbangbash.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-03-09Input: raspberrypi-ts - select CONFIG_INPUT_POLLDEVArnd Bergmann1-0/+1
When CONFIG_INPUT_POLLDEV is disabled, we get a link error: drivers/input/touchscreen/raspberrypi-ts.o: In function `rpi_ts_probe': raspberrypi-ts.c:(.text+0xec): undefined reference to `devm_input_allocate_polled_device' raspberrypi-ts.c:(.text+0xec): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `devm_input_allocate_polled_device' raspberrypi-ts.c:(.text+0x19c): undefined reference to `input_register_polled_device' raspberrypi-ts.c:(.text+0x19c): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `input_register_polled_device' Select that symbol like we do from the other similar drivers. Fixes: 0b9f28fed3f7 ("Input: add official Raspberry Pi's touchscreen driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-03-09Input: msm-vibrator - use correct gpio headerArnd Bergmann1-1/+1
When CONFIG_GPIOLIB is not set, we get a couple of build errors during test building: drivers/input/misc/msm-vibrator.c: In function 'msm_vibrator_start': drivers/input/misc/msm-vibrator.c:79:3: error: implicit declaration of function 'gpiod_set_value_cansleep'; did you mean 'gpio_set_value_cansleep'? [-Werror=implicit-function-declaration] gpiod_set_value_cansleep(vibrator->enable_gpio, 1); ^~~~~~~~~~~~~~~~~~~~~~~~ gpio_set_value_cansleep drivers/input/misc/msm-vibrator.c: In function 'msm_vibrator_probe': drivers/input/misc/msm-vibrator.c:176:26: error: implicit declaration of function 'devm_gpiod_get'; did you mean 'devm_gpio_free'? [-Werror=implicit-function-declaration] vibrator->enable_gpio = devm_gpiod_get(&pdev->dev, "enable", ^~~~~~~~~~~~~~ devm_gpio_free drivers/input/misc/msm-vibrator.c:177:13: error: 'GPIOD_OUT_LOW' undeclared (first use in this function); did you mean 'GPIOF_INIT_LOW'? GPIOD_OUT_LOW); ^~~~~~~~~~~~~ GPIOF_INIT_LOW drivers/input/misc/msm-vibrator.c:177:13: note: each undeclared identifier is reported only once for each function it appears in This is easy to avoid when we use gpio/consumer.h as the documented interface. Fixes: 0f681d09e66e ("Input: add new vibrator driver for various MSM SOCs") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-03-03Input: edt-ft5x06 - convert to use SPDX identifierAndy Shevchenko1-14/+2
Reduce size of duplicated comments by switching to use SPDX identifier. No functional change. While here, correct MODULE_LICENSE() string to be aligned with license text. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-03-03Input: edt-ft5x06 - enable ACPI enumerationAndy Shevchenko1-5/+2
ACPI allows to enumerate specific devices by using compatible strings. Enable that enumeration for EDT touchscreen devices. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-03-03Merge branch 'next' into for-linusDmitry Torokhov31-367/+1203
Prepare input updates for 5.1 merge window.
2019-02-19Input: ti_am335x_tsc - remove set but not used variable 'tscadc_dev'YueHaibing1-4/+0
Fixes gcc '-Wunused-but-set-variable' warning: drivers/input/touchscreen/ti_am335x_tsc.c: In function 'titsc_suspend': drivers/input/touchscreen/ti_am335x_tsc.c:510:24: warning: variable 'tscadc_dev' set but not used [-Wunused-but-set-variable] drivers/input/touchscreen/ti_am335x_tsc.c: In function 'titsc_resume': drivers/input/touchscreen/ti_am335x_tsc.c:527:24: warning: variable 'tscadc_dev' set but not used [-Wunused-but-set-variable] It's not used any more after 333e07ec4b33 ("Input: ti_am335x_tsc: Mark TSC device as wakeup source") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-02-18Input: i8042 - rework DT node name comparisonsRob Herring1-11/+10
Convert string compares of DT node names to use of_node_name_eq helper instead. For the root node on SUN DT, we need to retrieve the 'name' property as it is the rare case where the 'name' property and node name differ. With both changes, it removes direct access to the node name pointer. While at it, convert the open coded loop to use for_each_child_of_node(). Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-02-16Input: goodix - print values in case of inconsistenciesGuido Günther1-1/+3
"Invalid config" gives little idea what's wrong. Print the values that must not be 0 so we know which ones are off. Signed-off-by: Guido Günther <agx@sigxcpu.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-02-16Input: goodix - refer to touchscreen.txt in device tree bindingsGuido Günther1-5/+8
Refer to touchscreen.txt for generic touch properties. This avoids duplication and we're using the generic code to parse these in the driver. While at that add touchscreen-size-{x,y} which are respected by the driver as well. Signed-off-by: Guido Günther <agx@sigxcpu.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-02-16Input: goodix - support Goodix gt5688Guido Günther2-0/+3
From what I've seen in vendor trees it's fine to treat this as gt1x¹. Tested on the Purism Librem 5 Devkit (Rocktech JH057N00900 panel). [1]: https://github.com/TadiT7/android_kernel_mtk-4.4/tree/master/drivers/input/touchscreen/mediatek/GT5688 Signed-off-by: Guido Günther <agx@sigxcpu.org> Reviewed-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-02-16Input: synaptics_i2c - remove redundant spinlockSven Van Asbroeck1-18/+4
Remove a leftover spinlock. This was required back when mod_delayed_work() did not exist, and had to be implemented with a cancel + queue. See commit e7c2f967445d ("workqueue: use mod_delayed_work() instead of __cancel + queue") schedule_delayed_work() and mod_delayed_work() can now be used concurrently. So the spinlock is no longer needed. Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2019-02-16Input: elan_i2c - add ACPI ID for touchpad in Lenovo V330-15ISKMauro Ciancio1-0/+1
This adds ELAN0617 to the ACPI table to support Elan touchpad found in Lenovo V330-15ISK. Signed-off-by: Mauro Ciancio <mauro@acadeu.com> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-13 15:08:13 +0000