summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2022-04-16Merge tag 'scsi-fixes' of ↵Linus Torvalds12-311/+280
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "13 fixes, all in drivers. The most extensive changes are in the iscsi series (affecting drivers qedi, cxgbi and bnx2i), the next most is scsi_debug, but that's just a simple revert and then minor updates to pm80xx" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: iscsi: MAINTAINERS: Add Mike Christie as co-maintainer scsi: qedi: Fix failed disconnect handling scsi: iscsi: Fix NOP handling during conn recovery scsi: iscsi: Merge suspend fields scsi: iscsi: Fix unbound endpoint error handling scsi: iscsi: Fix conn cleanup and stop race during iscsid restart scsi: iscsi: Fix endpoint reuse regression scsi: iscsi: Release endpoint ID when its freed scsi: iscsi: Fix offload conn cleanup when iscsid restarts scsi: iscsi: Move iscsi_ep_disconnect() scsi: pm80xx: Enable upper inbound, outbound queues scsi: pm80xx: Mask and unmask upper interrupt vectors 32-63 Revert "scsi: scsi_debug: Address races following module load"
2022-04-16Merge tag 'intel-gpio-v5.18-2' of ↵Bartosz Golaszewski2-11/+19
gitolite.kernel.org:pub/scm/linux/kernel/git/andy/linux-gpio-intel into gpio/for-current intel-gpio for v5.18-2 * Couple of fixes related to handling unsigned value of the pin from ACPI gpiolib: - acpi: Convert type for pin to be unsigned - acpi: use correct format characters
2022-04-16Merge tag 'dma-mapping-5.18-2' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds1-1/+2
Pull dma-mapping fix from Christoph Hellwig: - avoid a double memory copy for swiotlb (Chao Gao) * tag 'dma-mapping-5.18-2' of git://git.infradead.org/users/hch/dma-mapping: dma-direct: avoid redundant memory sync for swiotlb
2022-04-16random: use memmove instead of memcpy for remaining 32 bytesJason A. Donenfeld1-1/+1
In order to immediately overwrite the old key on the stack, before servicing a userspace request for bytes, we use the remaining 32 bytes of block 0 as the key. This means moving indices 8,9,a,b,c,d,e,f -> 4,5,6,7,8,9,a,b. Since 4 < 8, for the kernel implementations of memcpy(), this doesn't actually appear to be a problem in practice. But relying on that characteristic seems a bit brittle. So let's change that to a proper memmove(), which is the by-the-books way of handling overlapping memory copies. Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-04-15Merge branch 'akpm' (patches from Andrew)Linus Torvalds25-168/+206
Merge misc fixes from Andrew Morton: "14 patches. Subsystems affected by this patch series: MAINTAINERS, binfmt, and mm (tmpfs, secretmem, kasan, kfence, pagealloc, zram, compaction, hugetlb, vmalloc, and kmemleak)" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm: kmemleak: take a full lowmem check in kmemleak_*_phys() mm/vmalloc: fix spinning drain_vmap_work after reading from /proc/vmcore revert "fs/binfmt_elf: use PT_LOAD p_align values for static PIE" revert "fs/binfmt_elf: fix PT_LOAD p_align values for loaders" hugetlb: do not demote poisoned hugetlb pages mm: compaction: fix compiler warning when CONFIG_COMPACTION=n mm: fix unexpected zeroed page mapping with zram swap mm, page_alloc: fix build_zonerefs_node() mm, kfence: support kmem_dump_obj() for KFENCE objects kasan: fix hw tags enablement when KUNIT tests are disabled irq_work: use kasan_record_aux_stack_noalloc() record callstack mm/secretmem: fix panic when growing a memfd_secret tmpfs: fix regressions from wider use of ZERO_PAGE MAINTAINERS: Broadcom internal lists aren't maintainers
2022-04-15Merge tag 'for-5.18/dm-fixes-2' of ↵Linus Torvalds4-40/+45
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - Fix memory corruption in DM integrity target when tag_size is less than digest size. - Fix DM multipath's historical-service-time path selector to not use sched_clock() and ktime_get_ns(); only use ktime_get_ns(). - Fix dm_io->orig_bio NULL pointer dereference in dm_zone_map_bio() due to 5.18 changes that overlooked DM zone's use of ->orig_bio - Fix for regression that broke the use of dm_accept_partial_bio() for "abnormal" IO (e.g. WRITE ZEROES) that does not need duplicate bios - Fix DM's issuing of empty flush bio so that it's size is 0. * tag 'for-5.18/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm: fix bio length of empty flush dm: allow dm_accept_partial_bio() for dm_io without duplicate bios dm zone: fix NULL pointer dereference in dm_zone_map_bio dm mpath: only use ktime_get_ns() in historical selector dm integrity: fix memory corruption when tag_size is less than digest size
2022-04-15mm: kmemleak: take a full lowmem check in kmemleak_*_phys()Patrick Wang1-4/+4
The kmemleak_*_phys() apis do not check the address for lowmem's min boundary, while the caller may pass an address below lowmem, which will trigger an oops: # echo scan > /sys/kernel/debug/kmemleak Unable to handle kernel paging request at virtual address ff5fffffffe00000 Oops [#1] Modules linked in: CPU: 2 PID: 134 Comm: bash Not tainted 5.18.0-rc1-next-20220407 #33 Hardware name: riscv-virtio,qemu (DT) epc : scan_block+0x74/0x15c ra : scan_block+0x72/0x15c epc : ffffffff801e5806 ra : ffffffff801e5804 sp : ff200000104abc30 gp : ffffffff815cd4e8 tp : ff60000004cfa340 t0 : 0000000000000200 t1 : 00aaaaaac23954cc t2 : 00000000000003ff s0 : ff200000104abc90 s1 : ffffffff81b0ff28 a0 : 0000000000000000 a1 : ff5fffffffe01000 a2 : ffffffff81b0ff28 a3 : 0000000000000002 a4 : 0000000000000001 a5 : 0000000000000000 a6 : ff200000104abd7c a7 : 0000000000000005 s2 : ff5fffffffe00ff9 s3 : ffffffff815cd998 s4 : ffffffff815d0e90 s5 : ffffffff81b0ff28 s6 : 0000000000000020 s7 : ffffffff815d0eb0 s8 : ffffffffffffffff s9 : ff5fffffffe00000 s10: ff5fffffffe01000 s11: 0000000000000022 t3 : 00ffffffaa17db4c t4 : 000000000000000f t5 : 0000000000000001 t6 : 0000000000000000 status: 0000000000000100 badaddr: ff5fffffffe00000 cause: 000000000000000d scan_gray_list+0x12e/0x1a6 kmemleak_scan+0x2aa/0x57e kmemleak_write+0x32a/0x40c full_proxy_write+0x56/0x82 vfs_write+0xa6/0x2a6 ksys_write+0x6c/0xe2 sys_write+0x22/0x2a ret_from_syscall+0x0/0x2 The callers may not quite know the actual address they pass(e.g. from devicetree). So the kmemleak_*_phys() apis should guarantee the address they finally use is in lowmem range, so check the address for lowmem's min boundary. Link: https://lkml.kernel.org/r/20220413122925.33856-1-patrick.wang.shcn@gmail.com Signed-off-by: Patrick Wang <patrick.wang.shcn@gmail.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-04-15mm/vmalloc: fix spinning drain_vmap_work after reading from /proc/vmcoreOmar Sandoval3-14/+0
Commit 3ee48b6af49c ("mm, x86: Saving vmcore with non-lazy freeing of vmas") introduced set_iounmap_nonlazy(), which sets vmap_lazy_nr to lazy_max_pages() + 1, ensuring that any future vunmaps() immediately purge the vmap areas instead of doing it lazily. Commit 690467c81b1a ("mm/vmalloc: Move draining areas out of caller context") moved the purging from the vunmap() caller to a worker thread. Unfortunately, set_iounmap_nonlazy() can cause the worker thread to spin (possibly forever). For example, consider the following scenario: 1. Thread reads from /proc/vmcore. This eventually calls __copy_oldmem_page() -> set_iounmap_nonlazy(), which sets vmap_lazy_nr to lazy_max_pages() + 1. 2. Then it calls free_vmap_area_noflush() (via iounmap()), which adds 2 pages (one page plus the guard page) to the purge list and vmap_lazy_nr. vmap_lazy_nr is now lazy_max_pages() + 3, so the drain_vmap_work is scheduled. 3. Thread returns from the kernel and is scheduled out. 4. Worker thread is scheduled in and calls drain_vmap_area_work(). It frees the 2 pages on the purge list. vmap_lazy_nr is now lazy_max_pages() + 1. 5. This is still over the threshold, so it tries to purge areas again, but doesn't find anything. 6. Repeat 5. If the system is running with only one CPU (which is typicial for kdump) and preemption is disabled, then this will never make forward progress: there aren't any more pages to purge, so it hangs. If there is more than one CPU or preemption is enabled, then the worker thread will spin forever in the background. (Note that if there were already pages to be purged at the time that set_iounmap_nonlazy() was called, this bug is avoided.) This can be reproduced with anything that reads from /proc/vmcore multiple times. E.g., vmcore-dmesg /proc/vmcore. It turns out that improvements to vmap() over the years have obsoleted the need for this "optimization". I benchmarked `dd if=/proc/vmcore of=/dev/null` with 4k and 1M read sizes on a system with a 32GB vmcore. The test was run on 5.17, 5.18-rc1 with a fix that avoided the hang, and 5.18-rc1 with set_iounmap_nonlazy() removed entirely: |5.17 |5.18+fix|5.18+removal 4k|40.86s| 40.09s| 26.73s 1M|24.47s| 23.98s| 21.84s The removal was the fastest (by a wide margin with 4k reads). This patch removes set_iounmap_nonlazy(). Link: https://lkml.kernel.org/r/52f819991051f9b865e9ce25605509bfdbacadcd.1649277321.git.osandov@fb.com Fixes: 690467c81b1a ("mm/vmalloc: Move draining areas out of caller context") Signed-off-by: Omar Sandoval <osandov@fb.com> Acked-by: Chris Down <chris@chrisdown.name> Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Baoquan He <bhe@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-04-15revert "fs/binfmt_elf: use PT_LOAD p_align values for static PIE"Andrew Morton1-2/+2
Despite Mike's attempted fix (925346c129da117122), regressions reports continue: https://lore.kernel.org/lkml/cb5b81bd-9882-e5dc-cd22-54bdbaaefbbc@leemhuis.info/ https://bugzilla.kernel.org/show_bug.cgi?id=215720 https://lkml.kernel.org/r/b685f3d0-da34-531d-1aa9-479accd3e21b@leemhuis.info So revert this patch. Fixes: 9630f0d60fec ("fs/binfmt_elf: use PT_LOAD p_align values for static PIE") Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Chris Kennelly <ckennelly@google.com> Cc: David Rientjes <rientjes@google.com> Cc: Fangrui Song <maskray@google.com> Cc: H.J. Lu <hjl.tools@gmail.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Sandeep Patil <sspatil@google.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Song Liu <songliubraving@fb.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Thorsten Leemhuis <regressions@leemhuis.info> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-04-15revert "fs/binfmt_elf: fix PT_LOAD p_align values for loaders"Andrew Morton1-1/+1
Commit 925346c129da11 ("fs/binfmt_elf: fix PT_LOAD p_align values for loaders") was an attempt to fix regressions due to 9630f0d60fec5f ("fs/binfmt_elf: use PT_LOAD p_align values for static PIE"). But regressionss continue to be reported: https://lore.kernel.org/lkml/cb5b81bd-9882-e5dc-cd22-54bdbaaefbbc@leemhuis.info/ https://bugzilla.kernel.org/show_bug.cgi?id=215720 https://lkml.kernel.org/r/b685f3d0-da34-531d-1aa9-479accd3e21b@leemhuis.info This patch reverts the fix, so the original can also be reverted. Fixes: 925346c129da11 ("fs/binfmt_elf: fix PT_LOAD p_align values for loaders") Cc: H.J. Lu <hjl.tools@gmail.com> Cc: Chris Kennelly <ckennelly@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Song Liu <songliubraving@fb.com> Cc: David Rientjes <rientjes@google.com> Cc: Ian Rogers <irogers@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Sandeep Patil <sspatil@google.com> Cc: Fangrui Song <maskray@google.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Thorsten Leemhuis <regressions@leemhuis.info> Cc: Mike Rapoport <rppt@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-04-15hugetlb: do not demote poisoned hugetlb pagesMike Kravetz1-7/+10
It is possible for poisoned hugetlb pages to reside on the free lists. The huge page allocation routines which dequeue entries from the free lists make a point of avoiding poisoned pages. There is no such check and avoidance in the demote code path. If a hugetlb page on the is on a free list, poison will only be set in the head page rather then the page with the actual error. If such a page is demoted, then the poison flag may follow the wrong page. A page without error could have poison set, and a page with poison could not have the flag set. Check for poison before attempting to demote a hugetlb page. Also, return -EBUSY to the caller if only poisoned pages are on the free list. Link: https://lkml.kernel.org/r/20220307215707.50916-1-mike.kravetz@oracle.com Fixes: 8531fc6f52f5 ("hugetlb: add hugetlb demote page support") Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-04-15mm: compaction: fix compiler warning when CONFIG_COMPACTION=nCharan Teja Kalla1-5/+5
The below warning is reported when CONFIG_COMPACTION=n: mm/compaction.c:56:27: warning: 'HPAGE_FRAG_CHECK_INTERVAL_MSEC' defined but not used [-Wunused-const-variable=] 56 | static const unsigned int HPAGE_FRAG_CHECK_INTERVAL_MSEC = 500; | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Fix it by moving 'HPAGE_FRAG_CHECK_INTERVAL_MSEC' under CONFIG_COMPACTION defconfig. Also since this is just a 'static const int' type, use #define for it. Link: https://lkml.kernel.org/r/1647608518-20924-1-git-send-email-quic_charante@quicinc.com Signed-off-by: Charan Teja Kalla <quic_charante@quicinc.com> Reported-by: kernel test robot <lkp@intel.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Nitin Gupta <nigupta@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-04-15mm: fix unexpected zeroed page mapping with zram swapMinchan Kim1-54/+0
Two processes under CLONE_VM cloning, user process can be corrupted by seeing zeroed page unexpectedly. CPU A CPU B do_swap_page do_swap_page SWP_SYNCHRONOUS_IO path SWP_SYNCHRONOUS_IO path swap_readpage valid data swap_slot_free_notify delete zram entry swap_readpage zeroed(invalid) data pte_lock map the *zero data* to userspace pte_unlock pte_lock if (!pte_same) goto out_nomap; pte_unlock return and next refault will read zeroed data The swap_slot_free_notify is bogus for CLONE_VM case since it doesn't increase the refcount of swap slot at copy_mm so it couldn't catch up whether it's safe or not to discard data from backing device. In the case, only the lock it could rely on to synchronize swap slot freeing is page table lock. Thus, this patch gets rid of the swap_slot_free_notify function. With this patch, CPU A will see correct data. CPU A CPU B do_swap_page do_swap_page SWP_SYNCHRONOUS_IO path SWP_SYNCHRONOUS_IO path swap_readpage original data pte_lock map the original data swap_free swap_range_free bd_disk->fops->swap_slot_free_notify swap_readpage read zeroed data pte_unlock pte_lock if (!pte_same) goto out_nomap; pte_unlock return on next refault will see mapped data by CPU B The concern of the patch would increase memory consumption since it could keep wasted memory with compressed form in zram as well as uncompressed form in address space. However, most of cases of zram uses no readahead and do_swap_page is followed by swap_free so it will free the compressed form from in zram quickly. Link: https://lkml.kernel.org/r/YjTVVxIAsnKAXjTd@google.com Fixes: 0bcac06f27d7 ("mm, swap: skip swapcache for swapin of synchronous device") Reported-by: Ivan Babrou <ivan@cloudflare.com> Tested-by: Ivan Babrou <ivan@cloudflare.com> Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: David Hildenbrand <david@redhat.com> Cc: <stable@vger.kernel.org> [4.14+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-04-15mm, page_alloc: fix build_zonerefs_node()Juergen Gross1-1/+1
Since commit 6aa303defb74 ("mm, vmscan: only allocate and reclaim from zones with pages managed by the buddy allocator") only zones with free memory are included in a built zonelist. This is problematic when e.g. all memory of a zone has been ballooned out when zonelists are being rebuilt. The decision whether to rebuild the zonelists when onlining new memory is done based on populated_zone() returning 0 for the zone the memory will be added to. The new zone is added to the zonelists only, if it has free memory pages (managed_zone() returns a non-zero value) after the memory has been onlined. This implies, that onlining memory will always free the added pages to the allocator immediately, but this is not true in all cases: when e.g. running as a Xen guest the onlined new memory will be added only to the ballooned memory list, it will be freed only when the guest is being ballooned up afterwards. Another problem with using managed_zone() for the decision whether a zone is being added to the zonelists is, that a zone with all memory used will in fact be removed from all zonelists in case the zonelists happen to be rebuilt. Use populated_zone() when building a zonelist as it has been done before that commit. There was a report that QubesOS (based on Xen) is hitting this problem. Xen has switched to use the zone device functionality in kernel 5.9 and QubesOS wants to use memory hotplugging for guests in order to be able to start a guest with minimal memory and expand it as needed. This was the report leading to the patch. Link: https://lkml.kernel.org/r/20220407120637.9035-1-jgross@suse.com Fixes: 6aa303defb74 ("mm, vmscan: only allocate and reclaim from zones with pages managed by the buddy allocator") Signed-off-by: Juergen Gross <jgross@suse.com> Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Reviewed-by: Wei Yang <richard.weiyang@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-04-15mm, kfence: support kmem_dump_obj() for KFENCE objectsMarco Elver9-25/+105
Calling kmem_obj_info() via kmem_dump_obj() on KFENCE objects has been producing garbage data due to the object not actually being maintained by SLAB or SLUB. Fix this by implementing __kfence_obj_info() that copies relevant information to struct kmem_obj_info when the object was allocated by KFENCE; this is called by a common kmem_obj_info(), which also calls the slab/slub/slob specific variant now called __kmem_obj_info(). For completeness, kmem_dump_obj() now displays if the object was allocated by KFENCE. Link: https://lore.kernel.org/all/20220323090520.GG16885@xsang-OptiPlex-9020/ Link: https://lkml.kernel.org/r/20220406131558.3558585-1-elver@google.com Fixes: b89fb5ef0ce6 ("mm, kfence: insert KFENCE hooks for SLUB") Fixes: d3fb45f370d9 ("mm, kfence: insert KFENCE hooks for SLAB") Signed-off-by: Marco Elver <elver@google.com> Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Reported-by: kernel test robot <oliver.sang@intel.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> [slab] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-04-15kasan: fix hw tags enablement when KUNIT tests are disabledVincenzo Frascino2-6/+9
Kasan enables hw tags via kasan_enable_tagging() which based on the mode passed via kernel command line selects the correct hw backend. kasan_enable_tagging() is meant to be invoked indirectly via the cpu features framework of the architectures that support these backends. Currently the invocation of this function is guarded by CONFIG_KASAN_KUNIT_TEST which allows the enablement of the correct backend only when KUNIT tests are enabled in the kernel. This inconsistency was introduced in commit: ed6d74446cbf ("kasan: test: support async (again) and asymm modes for HW_TAGS") ... and prevents to enable MTE on arm64 when KUNIT tests for kasan hw_tags are disabled. Fix the issue making sure that the CONFIG_KASAN_KUNIT_TEST guard does not prevent the correct invocation of kasan_enable_tagging(). Link: https://lkml.kernel.org/r/20220408124323.10028-1-vincenzo.frascino@arm.com Fixes: ed6d74446cbf ("kasan: test: support async (again) and asymm modes for HW_TAGS") Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-04-15irq_work: use kasan_record_aux_stack_noalloc() record callstackZqiang1-1/+1
On PREEMPT_RT kernel and KASAN is enabled. the kasan_record_aux_stack() may call alloc_pages(), and the rt-spinlock will be acquired, if currently in atomic context, will trigger warning: BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:46 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 239, name: bootlogd Preemption disabled at: [<ffffffffbab1a531>] rt_mutex_slowunlock+0xa1/0x4e0 CPU: 3 PID: 239 Comm: bootlogd Tainted: G W 5.17.1-rt17-yocto-preempt-rt+ #105 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014 Call Trace: __might_resched.cold+0x13b/0x173 rt_spin_lock+0x5b/0xf0 get_page_from_freelist+0x20c/0x1610 __alloc_pages+0x25e/0x5e0 __stack_depot_save+0x3c0/0x4a0 kasan_save_stack+0x3a/0x50 __kasan_record_aux_stack+0xb6/0xc0 kasan_record_aux_stack+0xe/0x10 irq_work_queue_on+0x6a/0x1c0 pull_rt_task+0x631/0x6b0 do_balance_callbacks+0x56/0x80 __balance_callbacks+0x63/0x90 rt_mutex_setprio+0x349/0x880 rt_mutex_slowunlock+0x22a/0x4e0 rt_spin_unlock+0x49/0x80 uart_write+0x186/0x2b0 do_output_char+0x2e9/0x3a0 n_tty_write+0x306/0x800 file_tty_write.isra.0+0x2af/0x450 tty_write+0x22/0x30 new_sync_write+0x27c/0x3a0 vfs_write+0x3f7/0x5d0 ksys_write+0xd9/0x180 __x64_sys_write+0x43/0x50 do_syscall_64+0x44/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae Fix it by using kasan_record_aux_stack_noalloc() to avoid the call to alloc_pages(). Link: https://lkml.kernel.org/r/20220402142555.2699582-1-qiang1.zhang@intel.com Signed-off-by: Zqiang <qiang1.zhang@intel.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-04-15mm/secretmem: fix panic when growing a memfd_secretAxel Rasmussen1-0/+17
When one tries to grow an existing memfd_secret with ftruncate, one gets a panic [1]. For example, doing the following reliably induces the panic: fd = memfd_secret(); ftruncate(fd, 10); ptr = mmap(NULL, 10, PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0); strcpy(ptr, "123456789"); munmap(ptr, 10); ftruncate(fd, 20); The basic reason for this is, when we grow with ftruncate, we call down into simple_setattr, and then truncate_inode_pages_range, and eventually we try to zero part of the memory. The normal truncation code does this via the direct map (i.e., it calls page_address() and hands that to memset()). For memfd_secret though, we specifically don't map our pages via the direct map (i.e. we call set_direct_map_invalid_noflush() on every fault). So the address returned by page_address() isn't useful, and when we try to memset() with it we panic. This patch avoids the panic by implementing a custom setattr for memfd_secret, which detects resizes specifically (setting the size for the first time works just fine, since there are no existing pages to try to zero), and rejects them with EINVAL. One could argue growing should be supported, but I think that will require a significantly more lengthy change. So, I propose a minimal fix for the benefit of stable kernels, and then perhaps to extend memfd_secret to support growing in a separate patch. [1]: BUG: unable to handle page fault for address: ffffa0a889277028 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD afa01067 P4D afa01067 PUD 83f909067 PMD 83f8bf067 PTE 800ffffef6d88060 Oops: 0002 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI CPU: 0 PID: 281 Comm: repro Not tainted 5.17.0-dbg-DEV #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:memset_erms+0x9/0x10 Code: c1 e9 03 40 0f b6 f6 48 b8 01 01 01 01 01 01 01 01 48 0f af c6 f3 48 ab 89 d1 f3 aa 4c 89 c8 c3 90 49 89 f9 40 88 f0 48 89 d1 <f3> aa 4c 89 c8 c3 90 49 89 fa 40 0f b6 ce 48 b8 01 01 01 01 01 01 RSP: 0018:ffffb932c09afbf0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffffda63c4249dc0 RCX: 0000000000000fd8 RDX: 0000000000000fd8 RSI: 0000000000000000 RDI: ffffa0a889277028 RBP: ffffb932c09afc00 R08: 0000000000001000 R09: ffffa0a889277028 R10: 0000000000020023 R11: 0000000000000000 R12: ffffda63c4249dc0 R13: ffffa0a890d70d98 R14: 0000000000000028 R15: 0000000000000fd8 FS: 00007f7294899580(0000) GS:ffffa0af9bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffa0a889277028 CR3: 0000000107ef6006 CR4: 0000000000370ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? zero_user_segments+0x82/0x190 truncate_inode_partial_folio+0xd4/0x2a0 truncate_inode_pages_range+0x380/0x830 truncate_setsize+0x63/0x80 simple_setattr+0x37/0x60 notify_change+0x3d8/0x4d0 do_sys_ftruncate+0x162/0x1d0 __x64_sys_ftruncate+0x1c/0x20 do_syscall_64+0x44/0xa0 entry_SYSCALL_64_after_hwframe+0x44/0xae Modules linked in: xhci_pci xhci_hcd virtio_net net_failover failover virtio_blk virtio_balloon uhci_hcd ohci_pci ohci_hcd evdev ehci_pci ehci_hcd 9pnet_virtio 9p netfs 9pnet CR2: ffffa0a889277028 [lkp@intel.com: secretmem_iops can be static] Signed-off-by: kernel test robot <lkp@intel.com> [axelrasmussen@google.com: return EINVAL] Link: https://lkml.kernel.org/r/20220324210909.1843814-1-axelrasmussen@google.com Link: https://lkml.kernel.org/r/20220412193023.279320-1-axelrasmussen@google.com Signed-off-by: Axel Rasmussen <axelrasmussen@google.com> Cc: Mike Rapoport <rppt@kernel.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: <stable@vger.kernel.org> Cc: kernel test robot <lkp@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-04-15tmpfs: fix regressions from wider use of ZERO_PAGEHugh Dickins2-17/+20
Chuck Lever reported fsx-based xfstests generic 075 091 112 127 failing when 5.18-rc1 NFS server exports tmpfs: bisected to recent tmpfs change. Whilst nfsd_splice_action() does contain some questionable handling of repeated pages, and Chuck was able to work around there, history from Mark Hemment makes clear that there might be similar dangers elsewhere: it was not a good idea for me to pass ZERO_PAGE down to unknown actors. Revert shmem_file_read_iter() to using ZERO_PAGE for holes only when iter_is_iovec(); in other cases, use the more natural iov_iter_zero() instead of copy_page_to_iter(). We would use iov_iter_zero() throughout, but the x86 clear_user() is not nearly so well optimized as copy to user (dd of 1T sparse tmpfs file takes 57 seconds rather than 44 seconds). And now pagecache_init() does not need to SetPageUptodate(ZERO_PAGE(0)): which had caused boot failure on arm noMMU STM32F7 and STM32H7 boards Link: https://lkml.kernel.org/r/9a978571-8648-e830-5735-1f4748ce2e30@google.com Fixes: 56a8c8eb1eaf ("tmpfs: do not allocate pages on read") Signed-off-by: Hugh Dickins <hughd@google.com> Reported-by: Patrice CHOTARD <patrice.chotard@foss.st.com> Reported-by: Chuck Lever III <chuck.lever@oracle.com> Tested-by: Chuck Lever III <chuck.lever@oracle.com> Cc: Mark Hemment <markhemm@googlemail.com> Cc: Patrice CHOTARD <patrice.chotard@foss.st.com> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: Lukas Czerner <lczerner@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: "Darrick J. Wong" <djwong@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-04-15MAINTAINERS: Broadcom internal lists aren't maintainersJoe Perches1-32/+32
Convert the broadcom internal list M: and L: entries to R: as exploder email addresses are neither maintainers nor mailing lists. Reorder the entries as necessary. Link: https://lkml.kernel.org/r/04eb301f5b3adbefdd78e76657eff0acb3e3d87f.camel@perches.com Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-04-15i2c: ismt: Fix undefined behavior due to shift overflowing the constantBorislav Petkov1-2/+2
Fix: drivers/i2c/busses/i2c-ismt.c: In function ‘ismt_hw_init’: drivers/i2c/busses/i2c-ismt.c:770:2: error: case label does not reduce to an integer constant case ISMT_SPGT_SPD_400K: ^~~~ drivers/i2c/busses/i2c-ismt.c:773:2: error: case label does not reduce to an integer constant case ISMT_SPGT_SPD_1M: ^~~~ See https://lore.kernel.org/r/YkwQ6%2BtIH8GQpuct@zn.tnic for the gory details as to why it triggers with older gccs only. Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-04-15i2c: dev: Force case user pointers in compat_i2cdev_ioctl()Andy Shevchenko1-1/+1
Sparse has warned us about wrong address space for user pointers: i2c-dev.c:561:50: warning: incorrect type in initializer (different address spaces) i2c-dev.c:561:50: expected unsigned char [usertype] *buf i2c-dev.c:561:50: got void [noderef] __user * Force cast the pointer to (__u8 *) that is used by I²C core code. Note, this is an additional fix to the previously addressed similar issue in the I2C_RDWR case in the same function. Fixes: 3265a7e6b41b ("i2c: dev: Add __user annotation") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-04-15i2c: dev: check return value when calling dev_set_name()Andy Shevchenko1-5/+10
If dev_set_name() fails, the dev_name() is null, check the return value of dev_set_name() to avoid the null-ptr-deref. Fixes: 1413ef638aba ("i2c: dev: Fix the race between the release of i2c_dev and cdev") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-04-15i2c: qcom-geni: Use dev_err_probe() for GPI DMA errorBjorn Andersson1-4/+2
The GPI DMA engine driver can be compiled as a module, in which case the likely probe deferral "error" shows up in the kernel log. Switch to using dev_err_probe() to silence this warning and to ensure that "devices_deferred" in debugfs carries this information. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-04-15i2c: imx: Implement errata ERR007805 or e7805 bus frequency limitMarek Vasut1-0/+33
The i.MX8MP Mask Set Errata for Mask 1P33A, Rev. 2.0 has description of errata ERR007805 as below. This errata is found on all MX8M{M,N,P,Q}, MX7{S,D}, MX6{UL{,L,Z},S{,LL,X},S,D,DL,Q,DP,QP} . MX7ULP, MX8Q, MX8X are not affected. MX53 and older status is unknown, as the errata first appears in MX6 errata sheets from 2016 and the latest errata sheet for MX53 is from 2015. Older SoC errata sheets predate the MX53 errata sheet. MX8ULP and MX9 status is unknown as the errata sheet is not available yet. " ERR007805 I2C: When the I2C clock speed is configured for 400 kHz, the SCL low period violates the I2C spec of 1.3 uS min Description: When the I2C module is programmed to operate at the maximum clock speed of 400 kHz (as defined by the I2C spec), the SCL clock low period violates the I2C spec of 1.3 uS min. The user must reduce the clock speed to obtain the SCL low time to meet the 1.3us I2C minimum required. This behavior means the SoC is not compliant to the I2C spec at 400kHz. Workaround: To meet the clock low period requirement in fast speed mode, SCL must be configured to 384KHz or less. " Implement the workaround by matching on the affected SoC specific compatible strings and by limiting the maximum bus frequency in case the SoC is affected. Signed-off-by: Marek Vasut <marex@denx.de> To: linux-i2c@vger.kernel.org Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-04-15i2c: pasemi: Wait for write xfers to finishMartin Povišer1-0/+6
Wait for completion of write transfers before returning from the driver. At first sight it may seem advantageous to leave write transfers queued for the controller to carry out on its own time, but there's a couple of issues with it: * Driver doesn't check for FIFO space. * The queued writes can complete while the driver is in its I2C read transfer path which means it will get confused by the raising of XEN (the 'transaction ended' signal). This can cause a spurious ENODATA error due to premature reading of the MRXFIFO register. Adding the wait fixes some unreliability issues with the driver. There's some efficiency cost to it (especially with pasemi_smb_waitready doing its polling), but that will be alleviated once the driver receives interrupt support. Fixes: beb58aa39e6e ("i2c: PA Semi SMBus driver") Signed-off-by: Martin Povišer <povik+lin@cutebit.org> Reviewed-by: Sven Peter <sven@svenpeter.dev> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-04-15dm: fix bio length of empty flushShin'ichiro Kawasaki1-0/+1
The commit 92986f6b4c8a ("dm: use bio_clone_fast in alloc_io/alloc_tio") removed bio_clone_fast() call from alloc_tio() when ci->io->tio is available. In this case, ci->bio is not copied to ci->io->tio.clone. This is fine since init_clone_info() sets same values to ci->bio and ci->io->tio.clone. However, when incoming bios have REQ_PREFLUSH flag, __send_empty_flush() prepares a zero length bio on stack and set it to ci->bio. At this time, ci->io->tio.clone still keeps non-zero length. When alloc_tio() chooses this ci->io->tio.clone as the bio to map, it is passed to targets as non-empty flush bio. It causes bio length check failure in dm-zoned and unexpected operation such as dm_accept_partial_bio() call. To avoid the non-empty flush bio, set zero length to ci->io->tio.clone in __send_empty_flush(). Fixes: 92986f6b4c8a ("dm: use bio_clone_fast in alloc_io/alloc_tio") Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2022-04-15Merge tag 'block-5.18-2022-04-15' of git://git.kernel.dk/linux-blockLinus Torvalds10-22/+48
Pull block fixes from Jens Axboe: - Moving of lower_48_bits() to the block layer and a fix for the unaligned_be48 added with that originally (Alexander, Keith) - Fix a bad WARN_ON() for trim size checking (Ming) - A polled IO timeout fix for null_blk (Ming) - Silence IO error printing for dead disks (Christoph) - Compat mode range fix (Khazhismel) - NVMe pull request via Christoph: - Tone down the error logging added this merge window a bit (Chaitanya Kulkarni) - Quirk devices with non-unique unique identifiers (Christoph) * tag 'block-5.18-2022-04-15' of git://git.kernel.dk/linux-block: block: don't print I/O error warning for dead disks block/compat_ioctl: fix range check in BLKGETSIZE nvme-pci: disable namespace identifiers for Qemu controllers nvme-pci: disable namespace identifiers for the MAXIO MAP1002/1202 nvme: add a quirk to disable namespace identifiers nvme: don't print verbose errors for internal passthrough requests block: null_blk: end timed out poll request block: fix offset/size check in bio_trim() asm-generic: fix __get_unaligned_be48() on 32 bit platforms block: move lower_48_bits() to block
2022-04-15Merge tag 'io_uring-5.18-2022-04-14' of git://git.kernel.dk/linux-blockLinus Torvalds3-41/+59
Pull io_uring fixes from Jens Axboe: - Ensure we check and -EINVAL any use of reserved or struct padding. Although we generally always do that, it's missed in two spots for resource updates, one for the ring fd registration from this merge window, and one for the extended arg. Make sure we have all of them handled. (Dylan) - A few fixes for the deferred file assignment (me, Pavel) - Add a feature flag for the deferred file assignment so apps can tell we handle it correctly (me) - Fix a small perf regression with the current file position fix in this merge window (me) * tag 'io_uring-5.18-2022-04-14' of git://git.kernel.dk/linux-block: io_uring: abort file assignment prior to assigning creds io_uring: fix poll error reporting io_uring: fix poll file assign deadlock io_uring: use right issue_flags for splice/tee io_uring: verify pad field is 0 in io_get_ext_arg io_uring: verify resv is 0 in ringfd register/unregister io_uring: verify that resv2 is 0 in io_uring_rsrc_update2 io_uring: move io_uring_rsrc_update2 validation io_uring: fix assign file locking issue io_uring: stop using io_wq_work as an fd placeholder io_uring: move apoll->events cache io_uring: io_kiocb_update_pos() should not touch file for non -1 offset io_uring: flag the fact that linked file assignment is sane
2022-04-15Merge tag 'linux-kselftest-fixes-5.18-rc3' of ↵Linus Torvalds1-8/+17
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest fixes from Shuah Khan: "A mqueue perf test memory leak bug fix. mq_perf_tests failed to call CPU_FREE to free memory allocated by CPU_SET" * tag 'linux-kselftest-fixes-5.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: testing/selftests/mqueue: Fix mq_perf_tests to free the allocated cpu set
2022-04-15Merge tag 'perf-tools-fixes-for-v5.18-2022-04-14' of ↵Linus Torvalds7-45/+176
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - 'perf record --per-thread' mode doesn't have the CPU mask setup, so it can use it to figure out the number of mmaps, fix it. - Fix segfault accessing sample_id xyarray out of bounds, noticed while using Intel PT where we have a dummy event to capture text poke perf metadata events and we mixup the set of CPUs specified by the user with the all CPUs map needed for text poke. - Fix 'perf bench numa' to check if CPU used to bind task is online. - Fix 'perf bench numa' usage of affinity for machines with more than 1000 CPUs. - Fix misleading add event PMU debug message, noticed while using the 'intel_pt' PMU. - Fix error check return value of hashmap__new() in 'perf stat', it must use IS_ERR(). * tag 'perf-tools-fixes-for-v5.18-2022-04-14' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf bench: Fix numa bench to fix usage of affinity for machines with #CPUs > 1K perf bench: Fix numa testcase to check if CPU used to bind task is online perf record: Fix per-thread option perf tools: Fix segfault accessing sample_id xyarray perf stat: Fix error check return value of hashmap__new(), must use IS_ERR() perf tools: Fix misleading add event PMU debug message
2022-04-15Merge tag 'nvme-5.18-2022-04-15' of git://git.infradead.org/nvme into block-5.18Jens Axboe3-8/+33
Pull NVMe fixes from Christoph: "nvme fixes for Linux 5.18 - tone down the error logging added this merge window a bit (Chaitanya Kulkarni) - quirk devices with non-unique unique identifiers (me)" * tag 'nvme-5.18-2022-04-15' of git://git.infradead.org/nvme: nvme-pci: disable namespace identifiers for Qemu controllers nvme-pci: disable namespace identifiers for the MAXIO MAP1002/1202 nvme: add a quirk to disable namespace identifiers nvme: don't print verbose errors for internal passthrough requests
2022-04-15block: don't print I/O error warning for dead disksChristoph Hellwig1-1/+2
When a disk has been marked dead, don't print warnings for I/O errors as they are very much expected. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20220323163815.1526998-1-hch@lst.de Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-04-15block/compat_ioctl: fix range check in BLKGETSIZEKhazhismel Kumykov1-1/+1
kernel ulong and compat_ulong_t may not be same width. Use type directly to eliminate mismatches. This would result in truncation rather than EFBIG for 32bit mode for large disks. Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Khazhismel Kumykov <khazhy@google.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Link: https://lore.kernel.org/r/20220414224056.2875681-1-khazhy@google.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-04-15nvme-pci: disable namespace identifiers for Qemu controllersChristoph Hellwig1-1/+4
Qemu unconditionally reports a UUID, which depending on the qemu version is either all-null (which is incorrect but harmless) or contains a single bit set for all controllers. In addition it can also optionally report a eui64 which needs to be manually set. Disable namespace identifiers for Qemu controlles entirely even if in some cases they could be set correctly through manual intervention. Reported-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
2022-04-15nvme-pci: disable namespace identifiers for the MAXIO MAP1002/1202Christoph Hellwig1-0/+4
The MAXIO MAP1002/1202 controllers reports completely bogus Namespace identifiers that even change after suspend cycles. Disable using the Identifiers entirely. Reported-by: 金韬 <me@kingtous.cn> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <kbusch@kernel.org> Tested-by: 金韬 <me@kingtous.cn>
2022-04-15nvme: add a quirk to disable namespace identifiersChristoph Hellwig2-6/+23
Add a quirk to disable using and exporting namespace identifiers for controllers where they are broken beyond repair. The most directly visible problem with non-unique namespace identifiers is that they break the /dev/disk/by-id/ links, with the link for a supposedly unique identifier now pointing to one of multiple possible namespaces that share the same ID, and a somewhat random selection of which one actually shows up. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
2022-04-15nvme: don't print verbose errors for internal passthrough requestsChaitanya Kulkarni1-1/+2
Use the RQF_QUIET flag to skip the newly added verbose error reporting, and set the flag in __nvme_submit_sync_cmd, which is used for most internal passthrough requests where we do expect errors (e.g. due to probing for optional functionality). This is similar to what the SCSI verbose error logging does. Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Alan Adamson <alan.adamson@oracle.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Tested-by: Alan Adamson <alan.adamson@oracle.com> Tested-by: Yi Zhang <yi.zhang@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2022-04-14io_uring: abort file assignment prior to assigning credsJens Axboe1-2/+3
We need to either restore creds properly if we fail on the file assignment, or just do the file assignment first instead. Let's do the latter as it's simpler, should make no difference here for file assignment. Link: https://lore.kernel.org/lkml/000000000000a7edb305dca75a50@google.com/ Reported-by: syzbot+60c52ca98513a8760a91@syzkaller.appspotmail.com Fixes: 6bf9c47a3989 ("io_uring: defer file assignment") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-04-14dm: allow dm_accept_partial_bio() for dm_io without duplicate biosMike Snitzer1-11/+6
The intent behind commit e6fc9f62ce6e ("dm: flag clones created by __send_duplicate_bios") was to formally disallow the use of dm_accept_partial_bio() where it simply isn't possible -- due to constraint that multiple bios cannot meaningfully update a shared tio->len_ptr. But that commit went too far and disallowed the case where "abormal" IO (e.g. WRITE_ZEROES) is only using a single bio. Fix this by not marking a dm_io with a single dm_target_io (and bio), that happens to be created by __send_duplicate_bios, as DM_TIO_IS_DUPLICATE_BIO. Also remove 'unsigned *len' parameter from alloc_multiple_bios(). This commit fixes a dm_accept_partial_bio() BUG_ON() with dm-zoned when a WRITE_ZEROES bio is issued. Fixes: 655f3aad7aa4 ("dm: switch dm_target_io booleans over to proper flags") Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com> Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Mike Snitzer <snitzer@kernel.org>
2022-04-14Merge tag 'drm-fixes-2022-04-15' of git://anongit.freedesktop.org/drm/drmLinus Torvalds21-70/+147
Pull drm fixes from Dave Airlie: "Eggs season holidays are among us, and I think I'd expect some smaller pulls for two weeks then. This seems eerily quiet. One i915 fix, amdgpu has a bunch and msm. I didn't see a misc pull this week, so I expect that will catch up next week. i915: - Correct legacy mmap disabling to use GRAPHICS_VER_FULL msm: - system suspend fix - kzalloc return checks - misc display fix - iommu_present removal amdgpu: - Fix for alpha properly in pre-multiplied mode - Fix VCN 3.1.2 firmware name - Suspend/resume fix - Add a gfxoff quirk for Mac vega20 board - DCN 3.1.6 spread spectrum fix" * tag 'drm-fixes-2022-04-15' of git://anongit.freedesktop.org/drm/drm: drm/amd/display: remove dtbclk_ss compensation for dcn316 drm/amdgpu: Enable gfxoff quirk on MacBook Pro drm/amdgpu: Ensure HDA function is suspended before ASIC reset drm/amdgpu: fix VCN 3.1.2 firmware name drm/amd/display: don't ignore alpha property on pre-multiplied mode drm/msm/gpu: Avoid -Wunused-function with !CONFIG_PM_SLEEP drm/msm/dp: add fail safe mode outside of event_mutex context drm/msm/dsi: Use connector directly in msm_dsi_manager_connector_init() drm/msm: Stop using iommu_present() drm/msm/mdp5: check the return of kzalloc() drm/msm: Fix range size vs end confusion drm/i915: Sunset igpu legacy mmap support based on GRAPHICS_VER_FULL drm/msm/dpu: Use indexed array initializer to prevent mismatches drm/msm/disp: check the return value of kzalloc() dt-bindings: display/msm: another fix for the dpu-qcm2290 example drm/msm: Add missing put_task_struct() in debugfs path drm/msm/gpu: Remove mutex from wait_event condition drm/msm/gpu: Park scheduler threads for system suspend drm/msm/gpu: Rename runtime suspend/resume functions
2022-04-14Merge tag 'vfio-v5.18-rc3' of https://github.com/awilliam/linux-vfioLinus Torvalds2-50/+76
Pull vfio fix from Alex Williamson: - Fix VF token checking for vfio-pci variant drivers (Jason Gunthorpe) * tag 'vfio-v5.18-rc3' of https://github.com/awilliam/linux-vfio: vfio/pci: Fix vf_token mechanism when device-specific VF drivers are used
2022-04-14Merge tag '5.18-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds6-20/+35
Pull cifs fixes from Steve French: - two fixes related to unmount - symlink overflow fix - minor netfs fix - improved tracing for crediting (flow control) * tag '5.18-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: verify that tcon is valid before dereference in cifs_kill_sb cifs: potential buffer overflow in handling symlinks cifs: Split the smb3_add_credits tracepoint cifs: release cached dentries only if mount is complete cifs: Check the IOCB_DIRECT flag, not O_DIRECT
2022-04-14VFS: filename_create(): fix incorrect intent.NeilBrown1-12/+10
When asked to create a path ending '/', but which is not to be a directory (LOOKUP_DIRECTORY not set), filename_create() will never try to create the file. If it doesn't exist, -ENOENT is reported. However, it still passes LOOKUP_CREATE|LOOKUP_EXCL to the filesystems ->lookup() function, even though there is no intent to create. This is misleading and can cause incorrect behaviour. If you try ln -s foo /path/dir/ where 'dir' is a directory on an NFS filesystem which is not currently known in the dcache, this will fail with ENOENT. But as the name is not in the dcache, nfs_lookup gets called with LOOKUP_CREATE|LOOKUP_EXCL and so it returns NULL without performing any lookup, with the expectation that a subsequent call to create the target will be made, and the lookup can be combined with the creation. In the case with a trailing '/' and no LOOKUP_DIRECTORY, that call is never made. Instead filename_create() sees that the dentry is not (yet) positive and returns -ENOENT - even though the directory actually exists. So only set LOOKUP_CREATE|LOOKUP_EXCL if there really is an intent to create, and use the absence of these flags to decide if -ENOENT should be returned. Note that filename_parentat() is only interested in LOOKUP_REVAL, so we split that out and store it in 'reval_flag'. __lookup_hash() then gets reval_flag combined with whatever create flags were determined to be needed. Reviewed-by: David Disseldorp <ddiss@suse.de> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: NeilBrown <neilb@suse.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-04-15Merge tag 'amd-drm-fixes-5.18-2022-04-13' of ↵Dave Airlie8-21/+37
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-5.18-2022-04-13: amdgpu: - Fix for alpha properly in pre-multiplied mode - Fix VCN 3.1.2 firmware name - Suspend/resume fix - Add a gfxoff quirk for Mac vega20 board - DCN 3.1.6 spread spectrum fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220414025821.5811-1-alexander.deucher@amd.com
2022-04-14dt-bindings: display: panel-timing: Define a single type for propertiesRob Herring1-24/+18
It's not good practice to define multiple types for the same property, so factor out the type reference making the properties always an uint32-array with a length of 1 or 3 items. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://lore.kernel.org/r/20220413140016.3131013-1-robh@kernel.org
2022-04-14ARM: config: Update Gemini defconfigLinus Walleij1-1/+4
The Gemini defconfig needs to be updated due to DSA driver Kconfig changes in the v5.18 merge window: CONFIG_NET_DSA_REALTEK_SMI is now behind CONFIG_NET_DSA_REALTEK and the desired DSA switch need to be selected explicitly with CONFIG_NET_DSA_REALTEK_RTL8366RB. Take this opportunity to update some other minor config options: - CONFIG_MARVELL_PHY moved around because of Kconfig changes. - CONFIG_SENSORS_DRIVETEMP should be selected since is regulates the system critical alert temperature on some devices, which is nice if it is handled even if initramfs or root fails to mount. Fixes: 319a70a5fea9 ("net: dsa: realtek-smi: move to subdirectory") Fixes: 765c39a4fafe ("net: dsa: realtek: convert subdrivers into modules") Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com> Cc: Luiz Angelo Daros de Luca <luizluca@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-14arm64: dts: qcom/sdm845-shift-axolotl: Fix boolean properties with valuesRob Herring1-1/+1
Boolean properties in DT are present or not present and don't take a value. A property such as 'foo = <0>;' evaluated to true. IOW, the value doesn't matter. It may have been intended that 0 values are false, but there is no change in behavior with this patch. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Krzysztof Kozlowski <krzk+dt@kernel.org> Cc: linux-arm-msm@vger.kernel.org Link: https://lore.kernel.org/r/20220407225254.2178644-1-robh@kernel.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-14ARM: dts: align SPI NOR node name with dtschemaKrzysztof Kozlowski6-7/+7
The node names should be generic and SPI NOR dtschema expects "flash". Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Link: https://lore.kernel.org/r/20220407143027.294678-1-krzysztof.kozlowski@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-04-14ARM: dts: Fix more boolean properties with valuesRob Herring4-8/+8
Boolean properties in DT are present or not present and don't take a value. A property such as 'foo = <0>;' evaluated to true. IOW, the value doesn't matter. It may have been intended that 0 values are false, but there is no change in behavior with this patch. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Krzysztof Kozlowski <krzk+dt@kernel.org> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Claudiu Beznea <claudiu.beznea@microchip.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: "Benoît Cousson" <bcousson@baylibre.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-arm-msm@vger.kernel.org Link: https://lore.kernel.org/r/20220407225107.2175958-1-robh@kernel.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>