summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2019-07-15vfio-ccw: Fix misleading comment when setting orb.cmd.c64Farhan Ali1-6/+7
The comment is misleading because it tells us that we should set orb.cmd.c64 before calling ccwchain_calc_length, otherwise the function ccwchain_calc_length would return an error. This is not completely accurate. We want to allow an orb without cmd.c64, and this is fine as long as the channel program does not use IDALs. But we do want to reject any channel program that uses IDALs and does not set the flag, which is what we do in ccwchain_calc_length. After we have done the ccw processing, we need to set cmd.c64, as we use IDALs for all translated channel programs. Also for better code readability let's move the setting of cmd.c64 within the non error path. Fixes: fb9e7880af35 ("vfio: ccw: push down unsupported IDA check") Signed-off-by: Farhan Ali <alifm@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <f68636106aef0faeb6ce9712584d102d1b315ff8.1562854091.git.alifm@linux.ibm.com> Reviewed-by: Eric Farman <farman@linux.ibm.com> Signed-off-by: Cornelia Huck <cohuck@redhat.com>
2019-07-11s390/unwind: avoid int overflow in outside_of_stackVasily Gorbik1-1/+1
When current task is interrupted in-between stack frame allocation and backchain write instructions new stack frame backchain pointer is left uninitialized. That invalid backchain value is passed into outside_of_stack for sanity check. Make sure int overflow does not happen by subtracting stack_frame size from the stack "end" rather than adding it to "random" backchain value. Fixes: 41b0474c1b1c ("s390/unwind: introduce stack unwind API") Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-11s390/zcrypt: remove the exporting of ap_query_configurationDenis Efremov1-1/+0
The function ap_query_configuration is declared static and marked EXPORT_SYMBOL, which is at best an odd combination. Because the function is not used outside of the drivers/s390/crypto/ap_bus.c file it is defined in, this commit removes the EXPORT_SYMBOL() marking. Link: http://lkml.kernel.org/r/20190709122507.11158-1-efremov@linux.com Fixes: f1b0a4343c41 ("s390/zcrypt: Integrate ap_asm.h into include/asm/ap.h.") Fixes: 050349b5b71d ("s390/zcrypt: externalize AP config info query") Signed-off-by: Denis Efremov <efremov@linux.com> Reviewed-by: Harald Freudenberger <freude@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-11s390/pci: add mio_enabled attributeSebastian Ott1-0/+10
Provide an attribute to query the usage of mio instructions. Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-11s390: fix setting of mio addressing controlSebastian Ott3-13/+3
Move enablement of mio addressing control from detect_machine_facilities to pci_base_init. detect_machine_facilities runs so early that the static branches have not been toggled yet, thus mio addressing control was always off. In pci_base_init we have to use the SMP aware ctl_set_bit though. Fixes: 833b441ec0f6 ("s390: enable processes for mio instructions") Signed-off-by: Sebastian Ott <sebott@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-11s390/ipl: Fix detection of has_secure attributePhilipp Rudo3-8/+1
Use the correct bit for detection of the machine capability associated with the has_secure attribute. It is expected that the underlying platform (including hypervisors) unsets the bit when they don't provide secure ipl for their guests. Fixes: c9896acc7851 ("s390/ipl: Provide has_secure sysfs attribute") Cc: stable@vger.kernel.org # 5.2 Signed-off-by: Philipp Rudo <prudo@linux.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-11s390: vfio-ap: fix irq registrationChristian Borntraeger1-2/+1
vfio_ap_free_aqic_resources is called in two places: - during registration to have a "known state" - during interrupt disable We must not clear q->matrix_mdev in the registration phase as this will mess up the reference counting and can lead to some warning and other bugs. Fixes: ec89b55e3bce ("s390: ap: implement PAPQ AQIC interception in kernel") Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-11s390/cpumf: Add extended counter set definitions for model 8561 and 8562Thomas Richter1-0/+2
Add the extended counter set definitions for s390 machine types 8561 and 8262. They are identical with machine types 3906 and 3907. Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-11s390/dasd: Handle out-of-space constraintJan Höppner5-3/+243
The storage server issues three different types of out-of-space messages whenever the Extent Pool or Extent Repository space runs short. When a configured warning watermark is reached, the physical space is completeley exhausted, or the capacity constraints have been relieved, a message is received. A log entry for the sysadmin to react to is generated in any case. In case the physical space is completely exhausted, sense data that reads "no space left on device" is received. In this case, currently running I/O will be blocked until space has either been released or added to the extent pool, and a relieve message was received via an attention interrupt. Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-11s390/dasd: Add discard support for ESE volumesJan Höppner1-3/+54
ESE (Extent Space Efficient) volumes are thin-provisioned and therefore space is only occupied with real data. In order to make previously used space available for re-allocation again, discard support is enabled for ESE volumes allowing the DASD driver to release said space. Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-11s390/dasd: Use ALIGN_DOWN macroJan Höppner1-1/+1
There is now an ALIGN_DOWN macro available. Let's rather use kernel provided macros that do the things we want. Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-11s390/dasd: Make dasd_setup_queue() a discipline functionJan Höppner7-80/+103
ECKD, FBA, and the DIAG discipline use slightly different block layer settings. In preparation of even more diverse queue settings, make dasd_setup_queue() a discipline function. Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-11s390/dasd: Add new ioctl to release spaceJan Höppner5-0/+364
Userspace tools might have the need to release space for Extent Space Efficient (ESE) volumes when working with such a device. Provide the necessarry interface for such a task by implementing a new ioctl BIODASDRAS. The ioctl uses the format_data_t data structure for data input: typedef struct format_data_t { unsigned int start_unit; /* from track */ unsigned int stop_unit; /* to track */ unsigned int blksize; /* sectorsize */ unsigned int intensity; } format_data_t; If the intensity is set to 0x40, start_unit and stop_unit are ignored and space for the entire volume is released. Otherwise, if intensity is set to 0, the respective range is released (if possible). Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-11s390/dasd: Add dasd_sleep_on_queue_interruptible()Jan Höppner2-0/+10
There is dasd_sleep_on() and dasd_sleep_on_interruptible() to start CCW requests uninterruptible and interruptible. However, there is only dasd_sleep_on_queue() to start requests from CCW queues uninterruptible. Add dasd_sleep_on_queue_interruptible() to provide a way to start requests from CCW queues interruptible. _dasd_sleep_on_queue() already provides this functionality. Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-11s390/dasd: Add missing intensity definitionJan Höppner1-0/+1
The definition for the bit that removes the write permission for record zero when formatting was missing. Add it to complete the list. Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-11s390/dasd: Fix whitespaceJan Höppner1-75/+75
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-11s390/dasd: Add dynamic formatting support for ESE volumesJan Höppner3-14/+239
A dynamic formatting is issued whenever a write request returns with either a No Record Found error (Command Mode), Incorrect Length error (Transport Mode), or File Protected error (Transport Mode). All three cases mean that the tracks in question haven't been initialized in a desired format yet. The part of the volume that was tried to be written on is then formatted and the original request is re-queued. As the formatting will happen during normal I/O operations, it is quite likely that there won't be any memory available to build the respective request. Another two pages of memory are allocated per volume specifically for the dynamic formatting. The dasd_eckd_build_format() function is extended to make sure that the original startdev is reused. Also, all formatting and format check functions use the new memory pool exclusively now to reduce complexity. Read operations will always return zero data when unformatted areas are read. Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-11s390/dasd: Recognise data for ESE volumesJan Höppner4-4/+430
In order to work with Extent Space Efficient (ESE) volumes, certain viable information about those volumes and the corresponding extent pool (such as extent size, configured space, allocated space, etc.) can be provided. Use the CCW commands Volume Storage Query and Logical Configuration Query to receive detailed information about ESE volumes and the extent pool respectively. These information are made accessible via internal functions for subsequent users, and via sysfs attributes for userpsace usage. The new sysfs attributes reside in separate directories called capacity and extent_pool. attributes: ese: 0/1 depending on whether the volume is an ESE volume Capacity related attributes: space_allocated: Space currently allocated by the volume (in cyl) space_configured: Remaining space in the extent pool (in cyl) logical_capacity: The entire addressable space for this volume (in cyl) Extent Pool related attributes: pool_id: ID of the extent pool the volume in question resides in pool_oos: Extent pool is out-of-space extent_size: Size of a single extent in this pool cap_at_warnlevel Extent pool capacity at warn level warn_threshold: Threshold at which percentage of remaining extent pool space a warning message is issued Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-11s390/dasd: Put sub-order definitions in a separate sectionJan Höppner1-2/+6
There are orders and sub-orders. Put them in different sections for a better overview. Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-11s390/dasd: Make layout analysis ESE compatibleJan Höppner1-6/+6
The disk layout and volume information of a DASD reside in the first two tracks of cylinder 0. When a DASD is set online, currently the first three tracks are read and analysed to confirm an expected layout. For CDL (Compatible Disk Layout) only count area data of the first track is evaluated and checked against expected key and data lengths. For LDL (Linux Disk Layout) the first and third track is evaluated. However, an LDL formatted volume is expected to be in the same format across all tracks. Checking the third track therefore doesn't have any more value than checking any other track at random. Now, an Extent Space Efficient (ESE) DASD is initialised by only formatting the first two tracks, as those tracks always contain all information necessarry. Checking the third track on an ESE volume will therefore most likely fail with a record not found error, as the third track will be empty. This in turn leads to the device being recognised with a volume size of 0. Attempts to write volume information on the first two tracks then fail with "no space left on device" errors. Initialising the first three tracks for an ESE volume is not a viable solution, because the third track is already a regular track and could contain user data. With that there is potential for data corruption. Instead, always only analyse the first two tracks, as it is sufficiant for both CDL and LDL, and allow ESE volumes to be recognised as well. Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-11s390/dasd: Remove old defines and functionJan Höppner1-21/+0
Commit 4d284cac76d0 ("[S390] Avoid excessive inlining.") removed bytes_per_record() which was the only user of the defines ECKD_C0 and ECKD_F*, and round_up_multiple(). Let's get rid of those. Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-11s390/dasd: Remove unused structs and function prototypesJan Höppner1-25/+0
There are structs that have never been used. There are also two function prototypes which were forgotton in commit f9f8d02fae0d ("[S390] dasd: revert LCU optimization"). Clean up and keep the header file tidy. Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com> Reviewed-by: Stefan Haberland <sth@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-08Merge tag 's390-5.3-1' of ↵Linus Torvalds109-5239/+6307
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Vasily Gorbik: - Improve stop_machine wait logic: replace cpu_relax_yield call in generic stop_machine function with a weak stop_machine_yield function. This is overridden on s390, which yields the current cpu to the neighbouring cpu after a couple of retries, instead of blindly giving up the cpu to the hipervisor. This significantly improves stop_machine performance on s390 in overcommitted scenarios. This includes common code changes which have been Acked by Peter Zijlstra and Thomas Gleixner. - Improve jump label transformation speed: transform jump labels without using stop_machine. - Refactoring of the vfio-ccw cp handling, simplifying the code and avoiding unneeded allocating/copying. - Various vfio-ccw fixes (ccw translation, state machine). - Add support for vfio-ap queue interrupt control in the guest. This includes s390 kvm changes which have been Acked by Christian Borntraeger. - Add protected virtualization support for virtio-ccw. - Enforce both CONFIG_SMP and CONFIG_HOTPLUG_CPU, which allows to remove some code which most likely isn't working at all, besides that s390 didn't even compile for !CONFIG_SMP. - Support for special flagged EP11 CPRBs for zcrypt. - Handle PCI devices with no support for new MIO instructions. - Avoid KASAN false positives in reworked stack unwinder. - Couple of fixes for the QDIO layer. - Convert s390 specific documentation to ReST format. - Let s390 crypto modules return -ENODEV instead of -EOPNOTSUPP if hardware is missing. This way our modules behave like most other modules and which is also what systemd's systemd-modules-load.service expects. - Replace defconfig with performance_defconfig, so there is one config file less to maintain. - Remove the SCLP call home device driver, which was never useful. - Cleanups all over the place. * tag 's390-5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (83 commits) docs: s390: s390dbf: typos and formatting, update crash command docs: s390: unify and update s390dbf kdocs at debug.c docs: s390: restore important non-kdoc parts of s390dbf.rst vfio-ccw: Fix the conversion of Format-0 CCWs to Format-1 s390/pci: correctly handle MIO opt-out s390/pci: deal with devices that have no support for MIO instructions s390: ap: kvm: Enable PQAP/AQIC facility for the guest s390: ap: implement PAPQ AQIC interception in kernel vfio: ap: register IOMMU VFIO notifier s390: ap: kvm: add PQAP interception for AQIC s390/unwind: cleanup unused READ_ONCE_TASK_STACK s390/kasan: avoid false positives during stack unwind s390/qdio: don't touch the dsci in tiqdio_add_input_queues() s390/qdio: (re-)initialize tiqdio list entries s390/dasd: Fix a precision vs width bug in dasd_feature_list() s390/cio: introduce driver_override on the css bus vfio-ccw: make convert_ccw0_to_ccw1 static vfio-ccw: Remove copy_ccw_from_iova() vfio-ccw: Factor out the ccw0-to-ccw1 transition vfio-ccw: Copy CCW data outside length calculation ...
2019-07-08Merge tag 'm68k-for-v5.3-tag1' of ↵Linus Torvalds14-166/+98
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k updates from Geert Uytterhoeven: - switch to using the generic remapping DMA allocator - defconfig updates * tag 'm68k-for-v5.3-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Implement arch_dma_prep_coherent() m68k: Use the generic dma coherent remap allocator m68k: defconfig: Update defconfigs for v5.2-rc1
2019-07-08Merge tag 'arm64-upstream' of ↵Linus Torvalds64-312/+1318
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: - arm64 support for syscall emulation via PTRACE_SYSEMU{,_SINGLESTEP} - Wire up VM_FLUSH_RESET_PERMS for arm64, allowing the core code to manage the permissions of executable vmalloc regions more strictly - Slight performance improvement by keeping softirqs enabled while touching the FPSIMD/SVE state (kernel_neon_begin/end) - Expose a couple of ARMv8.5 features to user (HWCAP): CondM (new XAFLAG and AXFLAG instructions for floating point comparison flags manipulation) and FRINT (rounding floating point numbers to integers) - Re-instate ARM64_PSEUDO_NMI support which was previously marked as BROKEN due to some bugs (now fixed) - Improve parking of stopped CPUs and implement an arm64-specific panic_smp_self_stop() to avoid warning on not being able to stop secondary CPUs during panic - perf: enable the ARM Statistical Profiling Extensions (SPE) on ACPI platforms - perf: DDR performance monitor support for iMX8QXP - cache_line_size() can now be set from DT or ACPI/PPTT if provided to cope with a system cache info not exposed via the CPUID registers - Avoid warning on hardware cache line size greater than ARCH_DMA_MINALIGN if the system is fully coherent - arm64 do_page_fault() and hugetlb cleanups - Refactor set_pte_at() to avoid redundant READ_ONCE(*ptep) - Ignore ACPI 5.1 FADTs reported as 5.0 (infer from the 'arm_boot_flags' introduced in 5.1) - CONFIG_RANDOMIZE_BASE now enabled in defconfig - Allow the selection of ARM64_MODULE_PLTS, currently only done via RANDOMIZE_BASE (and an erratum workaround), allowing modules to spill over into the vmalloc area - Make ZONE_DMA32 configurable * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (54 commits) perf: arm_spe: Enable ACPI/Platform automatic module loading arm_pmu: acpi: spe: Add initial MADT/SPE probing ACPI/PPTT: Add function to return ACPI 6.3 Identical tokens ACPI/PPTT: Modify node flag detection to find last IDENTICAL x86/entry: Simplify _TIF_SYSCALL_EMU handling arm64: rename dump_instr as dump_kernel_instr arm64/mm: Drop [PTE|PMD]_TYPE_FAULT arm64: Implement panic_smp_self_stop() arm64: Improve parking of stopped CPUs arm64: Expose FRINT capabilities to userspace arm64: Expose ARMv8.5 CondM capability to userspace arm64: defconfig: enable CONFIG_RANDOMIZE_BASE arm64: ARM64_MODULES_PLTS must depend on MODULES arm64: bpf: do not allocate executable memory arm64/kprobes: set VM_FLUSH_RESET_PERMS on kprobe instruction pages arm64/mm: wire up CONFIG_ARCH_HAS_SET_DIRECT_MAP arm64: module: create module allocations without exec permissions arm64: Allow user selection of ARM64_MODULE_PLTS acpi/arm64: ignore 5.1 FADTs that are reported as 5.0 arm64: Allow selecting Pseudo-NMI again ...
2019-07-07Linux 5.2v5.2Linus Torvalds1-1/+1
2019-07-06Merge tag 'for-linus-20190706' of git://git.kernel.dk/linux-blockLinus Torvalds1-0/+7
Pull block fix from Jens Axboe: "Just a single fix for a patch from Greg KH, which reportedly break block debugfs locations for certain setups. Trivial enough that I think we should include it now, rather than wait and release 5.2 with it, since it's a regression in this series" * tag 'for-linus-20190706' of git://git.kernel.dk/linux-block: blk-mq: fix up placement of debugfs directory of queue files
2019-07-06Merge tag 'mips_fixes_5.2_2' of ↵Linus Torvalds7-15/+29
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fixes from Paul Burton: "A few more MIPS fixes: - Fix a silly typo in virt_addr_valid which led to completely bogus behavior (that happened to stop tripping up hardened usercopy despite being broken). - Fix UART parity setup on AR933x systems. - A build fix for non-Linux build machines. - Have the 'all' make target build DTBs, primarily to fit in with the behavior of scripts/package/builddeb. - Handle an execution hazard in TLB exceptions that use KScratch registers, which could inadvertently clobber the $1 register on some generally higher-end out-of-order CPUs. - A MAINTAINERS update to fix the path to the NAND driver for Ingenic systems" * tag 'mips_fixes_5.2_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MAINTAINERS: Correct path to moved files MIPS: Add missing EHB in mtc0 -> mfc0 sequence. MIPS: have "plain" make calls build dtbs for selected platforms MIPS: fix build on non-linux hosts MIPS: ath79: fix ar933x uart parity mode MIPS: Fix bounds check virt_addr_valid
2019-07-06Merge tag 'dmaengine-fix-5.2' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds3-25/+35
Pull dmaengine fixes from Vinod Koul: - bam_dma fix for completed descriptor count - fix for imx-sdma remove BD_INTR for channel0 and use-after-free on probe error path - endian bug fix in jz4780 IRQ handler * tag 'dmaengine-fix-5.2' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: qcom: bam_dma: Fix completed descriptors count dmaengine: imx-sdma: remove BD_INTR for channel0 dmaengine: imx-sdma: fix use-after-free on probe error path dmaengine: jz4780: Fix an endian bug in IRQ handler
2019-07-06Merge tag 'scsi-fixes' of ↵Linus Torvalds2-9/+9
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Two iscsi fixes. One for an oops in the client which can be triggered by the server authentication protocol and the other in the target code which causes data corruption" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: iscsi: set auth_protocol back to NULL if CHAP_A value is not supported scsi: target/iblock: Fix overrun in WRITE SAME emulation
2019-07-06Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds1-1/+0
Pull vfs fixlet from Al Viro: "Fix bogus default y in Kconfig (VALIDATE_FS_PARSER) That thing should not be turned on by default, especially since it's not quiet in case it finds no problems. Geert has sent the obvious fix quite a few times, but it fell through the cracks" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs: VALIDATE_FS_PARSER should default to n
2019-07-06blk-mq: fix up placement of debugfs directory of queue filesGreg Kroah-Hartman1-0/+7
When the blk-mq debugfs file creation logic was "cleaned up" it was cleaned up too much, causing the queue file to not be created in the correct location. Turns out the check for the directory being present is needed as if that has not happened yet, the files should not be created, and the function will be called later on in the initialization code so that the files can be created in the correct location. Fixes: 6cfc0081b046 ("blk-mq: no need to check return value of debugfs_create functions") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: linux-block@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-05Revert "mm: page cache: store only head pages in i_pages"Linus Torvalds8-82/+94
This reverts commit 5fd4ca2d84b249f0858ce28cf637cf25b61a398f. Mikhail Gavrilov reports that it causes the VM_BUG_ON_PAGE() in __delete_from_swap_cache() to trigger: page:ffffd6d34dff0000 refcount:1 mapcount:1 mapping:ffff97812323a689 index:0xfecec363 anon flags: 0x17fffe00080034(uptodate|lru|active|swapbacked) raw: 0017fffe00080034 ffffd6d34c67c508 ffffd6d3504b8d48 ffff97812323a689 raw: 00000000fecec363 0000000000000000 0000000100000000 ffff978433ace000 page dumped because: VM_BUG_ON_PAGE(entry != page) page->mem_cgroup:ffff978433ace000 ------------[ cut here ]------------ kernel BUG at mm/swap_state.c:170! invalid opcode: 0000 [#1] SMP NOPTI CPU: 1 PID: 221 Comm: kswapd0 Not tainted 5.2.0-0.rc2.git0.1.fc31.x86_64 #1 Hardware name: System manufacturer System Product Name/ROG STRIX X470-I GAMING, BIOS 2202 04/11/2019 RIP: 0010:__delete_from_swap_cache+0x20d/0x240 Code: 30 65 48 33 04 25 28 00 00 00 75 4a 48 83 c4 38 5b 5d 41 5c 41 5d 41 5e 41 5f c3 48 c7 c6 2f dc 0f 8a 48 89 c7 e8 93 1b fd ff <0f> 0b 48 c7 c6 a8 74 0f 8a e8 85 1b fd ff 0f 0b 48 c7 c6 a8 7d 0f RSP: 0018:ffffa982036e7980 EFLAGS: 00010046 RAX: 0000000000000021 RBX: 0000000000000040 RCX: 0000000000000006 RDX: 0000000000000000 RSI: 0000000000000086 RDI: ffff97843d657900 RBP: 0000000000000001 R08: ffffa982036e7835 R09: 0000000000000535 R10: ffff97845e21a46c R11: ffffa982036e7835 R12: ffff978426387120 R13: 0000000000000000 R14: ffffd6d34dff0040 R15: ffffd6d34dff0000 FS: 0000000000000000(0000) GS:ffff97843d640000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00002cba88ef5000 CR3: 000000078a97c000 CR4: 00000000003406e0 Call Trace: delete_from_swap_cache+0x46/0xa0 try_to_free_swap+0xbc/0x110 swap_writepage+0x13/0x70 pageout.isra.0+0x13c/0x350 shrink_page_list+0xc14/0xdf0 shrink_inactive_list+0x1e5/0x3c0 shrink_node_memcg+0x202/0x760 shrink_node+0xe0/0x470 balance_pgdat+0x2d1/0x510 kswapd+0x220/0x420 kthread+0xfb/0x130 ret_from_fork+0x22/0x40 and it's not immediately obvious why it happens. It's too late in the rc cycle to do anything but revert for now. Link: https://lore.kernel.org/lkml/CABXGCsN9mYmBD-4GaaeW_NrDu+FDXLzr_6x+XNxfmFV6QkYCDg@mail.gmail.com/ Reported-and-bisected-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Suggested-by: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Matthew Wilcox <willy@infradead.org> Cc: Kirill Shutemov <kirill@shutemov.name> Cc: William Kucharski <william.kucharski@oracle.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-05Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds5-15/+26
Pull kvm fixes from Paolo Bonzini: "x86 bugfix patches and one compilation fix for ARM" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: arm64/sve: Fix vq_present() macro to yield a bool KVM: LAPIC: Fix pending interrupt in IRR blocked by software disable LAPIC KVM: nVMX: Change KVM_STATE_NESTED_EVMCS to signal vmcs12 is copied from eVMCS KVM: nVMX: Allow restore nested-state to enable eVMCS when vCPU in SMM KVM: x86: degrade WARN to pr_warn_ratelimited
2019-07-05Merge tag 'mtd/fixes-for-5.2-final' of ↵Linus Torvalds7-39/+22
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull mtf fixes from Miquel Raynal: - Fix the memory organization structure of a Macronix SPI-NAND chip. - Fix a build dependency wrongly described. - Fix the sunxi NAND driver for A23/A33 SoCs by (a) reverting the faulty commit introducing broken DMA support and (b) applying another commit bringing working DMA support. * tag 'mtd/fixes-for-5.2-final' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: mtd: rawnand: sunxi: Add A23/A33 DMA support with extra MBUS configuration Revert "mtd: rawnand: sunxi: Add A23/A33 DMA support" mtd: rawnand: ingenic: Fix ingenic_ecc dependency mtd: spinand: Fix max_bad_eraseblocks_per_lun info in memorg
2019-07-05Merge branch 'i2c/for-current' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fixlet from Wolfram Sang: "I2C has a MAINTAINERS update which will be benfitial for developers, so let's add it right away" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: tegra: Add Dmitry as a reviewer
2019-07-05Merge tag 'nfsd-5.2-2' of git://linux-nfs.org/~bfields/linuxLinus Torvalds2-2/+7
Pull nfsd fixes from Bruce Fields: "Two more quick bugfixes for nfsd: fixing a regression causing mount failures on high-memory machines and fixing the DRC over RDMA" * tag 'nfsd-5.2-2' of git://linux-nfs.org/~bfields/linux: nfsd: Fix overflow causing non-working mounts on 1 TB machines svcrdma: Ignore source port when computing DRC hash
2019-07-05mtd: rawnand: sunxi: Add A23/A33 DMA support with extra MBUS configurationMiquel Raynal1-0/+24
Allwinner NAND controllers can make use of DMA to enhance the I/O throughput thanks to ECC pipelining. DMA handling with A23/A33 NAND IP is a bit different than with the older SoCs, hence the introduction of a new compatible to handle: * the differences between register offsets, * the burst length change from 4 to minimum 8, * manage SRAM accesses through MBUS with extra configuration. Fixes: c49836f05aa1 ("mtd: rawnand: sunxi: Add A23/A33 DMA support") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-07-05Revert "mtd: rawnand: sunxi: Add A23/A33 DMA support"Miquel Raynal1-36/+2
This reverts commit c49836f05aa15282f7280e06ede3f6f8a6324833. The commit is wrong and its approach actually does not work. Let's revert it in order to add the feature with a clean patch. Fixes: c49836f05aa1 ("mtd: rawnand: sunxi: Add A23/A33 DMA support") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-07-05i2c: tegra: Add Dmitry as a reviewerDmitry Osipenko1-0/+1
I'm contributing to Tegra's upstream development in general and happened to review the Tegra's I2C patches for awhile because I'm actively using upstream kernel on all of my Tegra-powered devices and initially some of the submitted patches were getting my attention since they were causing problems. Recently Wolfram Sang asked whether I'm interested in becoming a reviewer for the driver and I don't mind at all. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> [wsa: ack was expressed by Thierry Reding in a mail thread] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-07-05fs: VALIDATE_FS_PARSER should default to nGeert Uytterhoeven1-1/+0
CONFIG_VALIDATE_FS_PARSER is a debugging tool to check that the parser tables are vaguely sane. It was set to default to 'Y' for the moment to catch errors in upcoming fs conversion development. Make sure it is not enabled by default in the final release of v5.1. Fixes: 31d921c7fb969172 ("vfs: Add configuration parser helpers") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-07-05docs: s390: s390dbf: typos and formatting, update crash commandSteffen Maier1-54/+68
Signed-off-by: Steffen Maier <maier@linux.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Message-Id: <1562149189-1417-4-git-send-email-maier@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-05docs: s390: unify and update s390dbf kdocs at debug.cSteffen Maier3-116/+102
For non-static-inlines, debug.c already had non-compliant function header docs. So move the pure prototype kdocs of ("s390: include/asm/debug.h add kerneldoc markups") from debug.h to debug.c and merge them with the old function docs. Also, I had the impression that kdoc typically is at the implementation in the compile unit rather than at the prototype in the header file. While at it, update the short kdoc description to distinguish the different functions. And a few more consistency cleanups. Added a new kdoc for debug_set_critical() since debug.h comments it as part of the API. Signed-off-by: Steffen Maier <maier@linux.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Message-Id: <1562149189-1417-3-git-send-email-maier@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-05docs: s390: restore important non-kdoc parts of s390dbf.rstSteffen Maier1-0/+339
Complements previous ("s390: include/asm/debug.h add kerneldoc markups") which seemed to have dropped important non-kdoc parts such as user space interface (level, size, flush) as well as views and caution regarding strings in the sprintf view. Signed-off-by: Steffen Maier <maier@linux.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Message-Id: <1562149189-1417-2-git-send-email-maier@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-05Merge tag 'vfio-ccw-20190705' of ↵Vasily Gorbik1-1/+1
https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/vfio-ccw into features Fix a bug introduced in the refactoring. * tag 'vfio-ccw-20190705' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/vfio-ccw: vfio-ccw: Fix the conversion of Format-0 CCWs to Format-1 Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2019-07-05KVM: arm64/sve: Fix vq_present() macro to yield a boolZhang Lei1-1/+1
The original implementation of vq_present() relied on aggressive inlining in order for the compiler to know that the code is correct, due to some const-casting issues. This was causing sparse and clang to complain, while GCC compiled cleanly. Commit 0c529ff789bc addressed this problem, but since vq_present() is no longer a function, there is now no implicit casting of the returned value to the return type (bool). In set_sve_vls(), this uncast bit value is compared against a bool, and so may spuriously compare as unequal when both are nonzero. As a result, KVM may reject valid SVE vector length configurations as invalid, and vice versa. Fix it by forcing the returned value to a bool. Signed-off-by: Zhang Lei <zhang.lei@jp.fujitsu.com> Fixes: 0c529ff789bc ("KVM: arm64: Implement vq_present() as a macro") Signed-off-by: Dave Martin <Dave.Martin@arm.com> [commit message rewrite] Cc: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-07-05dmaengine: qcom: bam_dma: Fix completed descriptors countSricharan R1-0/+3
One space is left unused in circular FIFO to differentiate 'full' and 'empty' cases. So take that in to account while counting for the descriptors completed. Fixes the issue reported here, https://lkml.org/lkml/2019/6/18/669 Cc: stable@vger.kernel.org Reported-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Sricharan R <sricharan@codeaurora.org> Tested-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-05dmaengine: imx-sdma: remove BD_INTR for channel0Robin Gong1-2/+2
It is possible for an irq triggered by channel0 to be received later after clks are disabled once firmware loaded during sdma probe. If that happens then clearing them by writing to SDMA_H_INTR won't work and the kernel will hang processing infinite interrupts. Actually, don't need interrupt triggered on channel0 since it's pollling SDMA_H_STATSTOP to know channel0 done rather than interrupt in current code, just clear BD_INTR to disable channel0 interrupt to avoid the above case. This issue was brought by commit 1d069bfa3c78 ("dmaengine: imx-sdma: ack channel 0 IRQ in the interrupt handler") which didn't take care the above case. Fixes: 1d069bfa3c78 ("dmaengine: imx-sdma: ack channel 0 IRQ in the interrupt handler") Cc: stable@vger.kernel.org #5.0+ Signed-off-by: Robin Gong <yibin.gong@nxp.com> Reported-by: Sven Van Asbroeck <thesven73@gmail.com> Tested-by: Sven Van Asbroeck <thesven73@gmail.com> Reviewed-by: Michael Olbrich <m.olbrich@pengutronix.de> Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-05dmaengine: imx-sdma: fix use-after-free on probe error pathSven Van Asbroeck1-21/+27
If probe() fails anywhere beyond the point where sdma_get_firmware() is called, then a kernel oops may occur. Problematic sequence of events: 1. probe() calls sdma_get_firmware(), which schedules the firmware callback to run when firmware becomes available, using the sdma instance structure as the context 2. probe() encounters an error, which deallocates the sdma instance structure 3. firmware becomes available, firmware callback is called with deallocated sdma instance structure 4. use after free - kernel oops ! Solution: only attempt to load firmware when we're certain that probe() will succeed. This guarantees that the firmware callback's context will remain valid. Note that the remove() path is unaffected by this issue: the firmware loader will increment the driver module's use count, ensuring that the module cannot be unloaded while the firmware callback is pending or running. Signed-off-by: Sven Van Asbroeck <TheSven73@gmail.com> Reviewed-by: Robin Gong <yibin.gong@nxp.com> [vkoul: fixed braces for if condition] Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-05dmaengine: jz4780: Fix an endian bug in IRQ handlerDan Carpenter1-2/+3
The "pending" variable was a u32 but we cast it to an unsigned long pointer when we do the for_each_set_bit() loop. The problem is that on big endian 64bit systems that results in an out of bounds read. Fixes: 4e4106f5e942 ("dmaengine: jz4780: Fix transfers being ACKed too soon") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Vinod Koul <vkoul@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-21 20:17:23 +0000