summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2022-02-02Partially revert "net/smc: Add netlink net namespace support"Dmitry V. Levin2-8/+5
The change of sizeof(struct smc_diag_linkinfo) by commit 79d39fc503b4 ("net/smc: Add netlink net namespace support") introduced an ABI regression: since struct smc_diag_lgrinfo contains an object of type "struct smc_diag_linkinfo", offset of all subsequent members of struct smc_diag_lgrinfo was changed by that change. As result, applications compiled with the old version of struct smc_diag_linkinfo will receive garbage in struct smc_diag_lgrinfo.role if the kernel implements this new version of struct smc_diag_linkinfo. Fix this regression by reverting the part of commit 79d39fc503b4 that changes struct smc_diag_linkinfo. After all, there is SMC_GEN_NETLINK interface which is good enough, so there is probably no need to touch the smc_diag ABI in the first place. Fixes: 79d39fc503b4 ("net/smc: Add netlink net namespace support") Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Reviewed-by: Karsten Graul <kgraul@linux.ibm.com> Link: https://lore.kernel.org/r/20220202030904.GA9742@altlinux.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-02Merge tag 'mlx5-fixes-2022-02-01' of ↵David S. Miller17-55/+102
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5 fixes 2022-02-01 This series provides bug fixes to mlx5 driver. Please pull and let me know if there is any problem. Sorry about the long series, but I had to move the top two patches from net-next to net to help avoiding a build break when kspp branch is merged into linus-next on next merge window. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-01Merge branch '1GbE' of ↵Jakub Kicinski3-19/+44
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-02-01 This series contains updates to e1000e driver only. Sasha removes CSME handshake with TGL platform as this is not supported and is causing hardware unit hangs to be reported. * '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: e1000e: Handshake with CSME starts from ADL platforms e1000e: Separate ADP board type from TGP ==================== Link: https://lore.kernel.org/r/20220201173754.580305-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-01net/mlx5e: Avoid field-overflowing memcpy()Kees Cook2-4/+6
In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memcpy(), memmove(), and memset(), avoid intentionally writing across neighboring fields. Use flexible arrays instead of zero-element arrays (which look like they are always overflowing) and split the cross-field memcpy() into two halves that can be appropriately bounds-checked by the compiler. We were doing: #define ETH_HLEN 14 #define VLAN_HLEN 4 ... #define MLX5E_XDP_MIN_INLINE (ETH_HLEN + VLAN_HLEN) ... struct mlx5e_tx_wqe *wqe = mlx5_wq_cyc_get_wqe(wq, pi); ... struct mlx5_wqe_eth_seg *eseg = &wqe->eth; struct mlx5_wqe_data_seg *dseg = wqe->data; ... memcpy(eseg->inline_hdr.start, xdptxd->data, MLX5E_XDP_MIN_INLINE); target is wqe->eth.inline_hdr.start (which the compiler sees as being 2 bytes in size), but copying 18, intending to write across start (really vlan_tci, 2 bytes). The remaining 16 bytes get written into wqe->data[0], covering byte_count (4 bytes), lkey (4 bytes), and addr (8 bytes). struct mlx5e_tx_wqe { struct mlx5_wqe_ctrl_seg ctrl; /* 0 16 */ struct mlx5_wqe_eth_seg eth; /* 16 16 */ struct mlx5_wqe_data_seg data[]; /* 32 0 */ /* size: 32, cachelines: 1, members: 3 */ /* last cacheline: 32 bytes */ }; struct mlx5_wqe_eth_seg { u8 swp_outer_l4_offset; /* 0 1 */ u8 swp_outer_l3_offset; /* 1 1 */ u8 swp_inner_l4_offset; /* 2 1 */ u8 swp_inner_l3_offset; /* 3 1 */ u8 cs_flags; /* 4 1 */ u8 swp_flags; /* 5 1 */ __be16 mss; /* 6 2 */ __be32 flow_table_metadata; /* 8 4 */ union { struct { __be16 sz; /* 12 2 */ u8 start[2]; /* 14 2 */ } inline_hdr; /* 12 4 */ struct { __be16 type; /* 12 2 */ __be16 vlan_tci; /* 14 2 */ } insert; /* 12 4 */ __be32 trailer; /* 12 4 */ }; /* 12 4 */ /* size: 16, cachelines: 1, members: 9 */ /* last cacheline: 16 bytes */ }; struct mlx5_wqe_data_seg { __be32 byte_count; /* 0 4 */ __be32 lkey; /* 4 4 */ __be64 addr; /* 8 8 */ /* size: 16, cachelines: 1, members: 3 */ /* last cacheline: 16 bytes */ }; So, split the memcpy() so the compiler can reason about the buffer sizes. "pahole" shows no size nor member offset changes to struct mlx5e_tx_wqe nor struct mlx5e_umr_wqe. "objdump -d" shows no meaningful object code changes (i.e. only source line number induced differences and optimizations). Fixes: b5503b994ed5 ("net/mlx5e: XDP TX forwarding support") Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-02-01net/mlx5e: Use struct_group() for memcpy() regionKees Cook2-3/+5
In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memcpy(), memmove(), and memset(), avoid intentionally writing across neighboring fields. Use struct_group() in struct vlan_ethhdr around members h_dest and h_source, so they can be referenced together. This will allow memcpy() and sizeof() to more easily reason about sizes, improve readability, and avoid future warnings about writing beyond the end of h_dest. "pahole" shows no size nor member offset changes to struct vlan_ethhdr. "objdump -d" shows no object code changes. Fixes: 34802a42b352 ("net/mlx5e: Do not modify the TX SKB") Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-02-01net/mlx5e: Avoid implicit modify hdr for decap drop ruleRoi Dayan1-1/+2
Currently the driver adds implicit modify hdr action for decap rules on tunnel devices if the port is an ovs port. This is also done if the action is drop and makes the modify hdr redundant and also the FW doesn't support it and will generate a syndrome. kernel: mlx5_core 0000:08:00.0: mlx5_cmd_check:777:(pid 102063): SET_FLOW_TABLE_ENTRY(0x936) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x8708c3) Fix it by adding the implicit modify hdr only for fwd actions. Fixes: b16eb3c81fe2 ("net/mlx5: Support internal port as decap route device") Fixes: 077cdda764c7 ("net/mlx5e: TC, Fix memory leak with rules with internal port") Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Ariel Levkovich <lariel@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-02-01net/mlx5e: IPsec: Fix tunnel mode crypto offload for non TCP/UDP trafficRaed Salem1-2/+11
IPsec Tunnel mode crypto offload software parser (SWP) setting in data path currently always set the inner L4 offset regardless of the encapsulated L4 header type and whether it exists in the first place, this breaks non TCP/UDP traffic as such. Set the SWP inner L4 offset only when the IPsec tunnel encapsulated L4 header protocol is TCP/UDP. While at it fix inner ip protocol read for setting MLX5_ETH_WQE_SWP_INNER_L4_UDP flag to address the case where the ip header protocol is IPv6. Fixes: f1267798c980 ("net/mlx5: Fix checksum issue of VXLAN and IPsec crypto offload") Signed-off-by: Raed Salem <raeds@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-02-01net/mlx5e: IPsec: Fix crypto offload for non TCP/UDP encapsulated trafficRaed Salem1-3/+6
IPsec crypto offload always set the ethernet segment checksum flags with the inner L4 header checksum flag enabled for encapsulated IPsec offloaded packet regardless of the encapsulated L4 header type, and even if it doesn't exists in the first place, this breaks non TCP/UDP traffic as such. Set the inner L4 checksum flag only when the encapsulated L4 header protocol is TCP/UDP using software parser swp_inner_l4_offset field as indication. Fixes: 5cfb540ef27b ("net/mlx5e: Set IPsec WAs only in IP's non checksum partial case.") Signed-off-by: Raed Salem <raeds@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-02-01net/mlx5e: Don't treat small ceil values as unlimited in HTB offloadMaxim Mikityanskiy1-1/+2
The hardware spec defines max_average_bw == 0 as "unlimited bandwidth". max_average_bw is calculated as `ceil / BYTES_IN_MBIT`, which can become 0 when ceil is small, leading to an undesired effect of having no bandwidth limit. This commit fixes it by rounding up small values of ceil to 1 Mbit/s. Fixes: 214baf22870c ("net/mlx5e: Support HTB offload") Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-02-01net/mlx5: E-Switch, Fix uninitialized variable modactMaor Dickman1-1/+1
The variable modact is not initialized before used in command modify header allocation which can cause command to fail. Fix by initializing modact with zeros. Addresses-Coverity: ("Uninitialized scalar variable") Fixes: 8f1e0b97cc70 ("net/mlx5: E-Switch, Mark miss packets with new chain id mapping") Signed-off-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-02-01net/mlx5e: Fix handling of wrong devices during bond neteventMaor Dickman1-18/+14
Current implementation of bond netevent handler only check if the handled netdev is VF representor and it missing a check if the VF representor is on the same phys device of the bond handling the netevent. Fix by adding the missing check and optimizing the check if the netdev is VF representor so it will not access uninitialized private data and crashes. BUG: kernel NULL pointer dereference, address: 000000000000036c PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI Workqueue: eth3bond0 bond_mii_monitor [bonding] RIP: 0010:mlx5e_is_uplink_rep+0xc/0x50 [mlx5_core] RSP: 0018:ffff88812d69fd60 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff8881cf800000 RCX: 0000000000000000 RDX: ffff88812d69fe10 RSI: 000000000000001b RDI: ffff8881cf800880 RBP: ffff8881cf800000 R08: 00000445cabccf2b R09: 0000000000000008 R10: 0000000000000004 R11: 0000000000000008 R12: ffff88812d69fe10 R13: 00000000fffffffe R14: ffff88820c0f9000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88846fb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000036c CR3: 0000000103d80006 CR4: 0000000000370ea0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: mlx5e_eswitch_uplink_rep+0x31/0x40 [mlx5_core] mlx5e_rep_is_lag_netdev+0x94/0xc0 [mlx5_core] mlx5e_rep_esw_bond_netevent+0xeb/0x3d0 [mlx5_core] raw_notifier_call_chain+0x41/0x60 call_netdevice_notifiers_info+0x34/0x80 netdev_lower_state_changed+0x4e/0xa0 bond_mii_monitor+0x56b/0x640 [bonding] process_one_work+0x1b9/0x390 worker_thread+0x4d/0x3d0 ? rescuer_thread+0x350/0x350 kthread+0x124/0x150 ? set_kthread_struct+0x40/0x40 ret_from_fork+0x1f/0x30 Fixes: 7e51891a237f ("net/mlx5e: Use netdev events to set/del egress acl forward-to-vport rule") Signed-off-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-02-01net/mlx5e: Fix broken SKB allocation in HW-GROKhalid Manaa1-9/+17
In case the HW doesn't perform header-data split, it will write the whole packet into the data buffer in the WQ, in this case the SHAMPO CQE handler couldn't use the header entry to build the SKB, instead it should allocate a new memory to build the SKB using the function: mlx5e_skb_from_cqe_mpwrq_nonlinear. Fixes: f97d5c2a453e ("net/mlx5e: Add handle SHAMPO cqe support") Signed-off-by: Khalid Manaa <khalidm@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-02-01net/mlx5e: Fix wrong calculation of header index in HW_GROKhalid Manaa2-2/+7
The HW doesn't wrap the CQE.shampo.header_index field according to the headers buffer size, instead it always increases it until reaching overflow of u16 size. Thus the mlx5e_handle_rx_cqe_mpwrq_shampo handler should mask the CQE header_index field to find the actual header index in the headers buffer. Fixes: f97d5c2a453e ("net/mlx5e: Add handle SHAMPO cqe support") Signed-off-by: Khalid Manaa <khalidm@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-02-01net/mlx5: Bridge, Fix devlink deadlock on net namespace deletionRoi Dayan1-2/+2
When changing mode to switchdev, rep bridge init registered to netdevice notifier holds the devlink lock and then takes pernet_ops_rwsem. At that time deleting a netns holds pernet_ops_rwsem and then takes the devlink lock. Example sequence is: $ ip netns add foo $ devlink dev eswitch set pci/0000:00:08.0 mode switchdev & $ ip netns del foo deleting netns trace: [ 1185.365555] ? devlink_pernet_pre_exit+0x74/0x1c0 [ 1185.368331] ? mutex_lock_io_nested+0x13f0/0x13f0 [ 1185.370984] ? xt_find_table+0x40/0x100 [ 1185.373244] ? __mutex_lock+0x24a/0x15a0 [ 1185.375494] ? net_generic+0xa0/0x1c0 [ 1185.376844] ? wait_for_completion_io+0x280/0x280 [ 1185.377767] ? devlink_pernet_pre_exit+0x74/0x1c0 [ 1185.378686] devlink_pernet_pre_exit+0x74/0x1c0 [ 1185.379579] ? devlink_nl_cmd_get_dumpit+0x3a0/0x3a0 [ 1185.380557] ? xt_find_table+0xda/0x100 [ 1185.381367] cleanup_net+0x372/0x8e0 changing mode to switchdev trace: [ 1185.411267] down_write+0x13a/0x150 [ 1185.412029] ? down_write_killable+0x180/0x180 [ 1185.413005] register_netdevice_notifier+0x1e/0x210 [ 1185.414000] mlx5e_rep_bridge_init+0x181/0x360 [mlx5_core] [ 1185.415243] mlx5e_uplink_rep_enable+0x269/0x480 [mlx5_core] [ 1185.416464] ? mlx5e_uplink_rep_disable+0x210/0x210 [mlx5_core] [ 1185.417749] mlx5e_attach_netdev+0x232/0x400 [mlx5_core] [ 1185.418906] mlx5e_netdev_attach_profile+0x15b/0x1e0 [mlx5_core] [ 1185.420172] mlx5e_netdev_change_profile+0x15a/0x1d0 [mlx5_core] [ 1185.421459] mlx5e_vport_rep_load+0x557/0x780 [mlx5_core] [ 1185.422624] ? mlx5e_stats_grp_vport_rep_num_stats+0x10/0x10 [mlx5_core] [ 1185.424006] mlx5_esw_offloads_rep_load+0xdb/0x190 [mlx5_core] [ 1185.425277] esw_offloads_enable+0xd74/0x14a0 [mlx5_core] Fix this by registering rep bridges for per net netdev notifier instead of global one, which operats on the net namespace without holding the pernet_ops_rwsem. Fixes: 19e9bfa044f3 ("net/mlx5: Bridge, add offload infrastructure") Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-02-01net/mlx5: Fix offloading with ESWITCH_IPV4_TTL_MODIFY_ENABLEDima Chumak1-3/+4
Only prio 1 is supported for nic mode when there is no ignore flow level support in firmware. But for switchdev mode, which supports fixed number of statically pre-allocated prios, this restriction is not relevant so it can be relaxed. Fixes: d671e109bd85 ("net/mlx5: Fix tc max supported prio for nic mode") Signed-off-by: Dima Chumak <dchumak@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-02-01net/mlx5e: TC, Reject rules with forward and drop actionsRoi Dayan1-0/+6
Such rules are redundant but allowed and passed to the driver. The driver does not support offloading such rules so return an error. Fixes: 03a9d11e6eeb ("net/mlx5e: Add TC drop and mirred/redirect action parsing for SRIOV offloads") Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Oz Shlomo <ozsh@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-02-01net/mlx5: Use del_timer_sync in fw reset flow of halting pollMaher Sanalla1-1/+1
Substitute del_timer() with del_timer_sync() in fw reset polling deactivation flow, in order to prevent a race condition which occurs when del_timer() is called and timer is deactivated while another process is handling the timer interrupt. A situation that led to the following call trace: RIP: 0010:run_timer_softirq+0x137/0x420 <IRQ> recalibrate_cpu_khz+0x10/0x10 ktime_get+0x3e/0xa0 ? sched_clock_cpu+0xb/0xc0 __do_softirq+0xf5/0x2ea irq_exit_rcu+0xc1/0xf0 sysvec_apic_timer_interrupt+0x9e/0xc0 asm_sysvec_apic_timer_interrupt+0x12/0x20 </IRQ> Fixes: 38b9f903f22b ("net/mlx5: Handle sync reset request event") Signed-off-by: Maher Sanalla <msanalla@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-02-01net/mlx5e: Fix module EEPROM queryGal Pressman1-4/+5
When querying the module EEPROM, there was a misusage of the 'offset' variable vs the 'query.offset' field. Fix that by always using 'offset' and assigning its value to 'query.offset' right before the mcia register read call. While at it, the cross-pages read size adjustment was changed to be more intuitive. Fixes: e19b0a3474ab ("net/mlx5: Refactor module EEPROM query") Reported-by: Wang Yugui <wangyugui@e16-tech.com> Signed-off-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-02-01net/mlx5e: TC, Reject rules with drop and modify hdr actionRoi Dayan1-0/+6
This kind of action is not supported by firmware and generates a syndrome. kernel: mlx5_core 0000:08:00.0: mlx5_cmd_check:777:(pid 102063): SET_FLOW_TABLE_ENTRY(0x936) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x8708c3) Fixes: d7e75a325cb2 ("net/mlx5e: Add offloading of E-Switch TC pedit (header re-write) actions") Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Oz Shlomo <ozsh@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-02-01net/mlx5: Bridge, ensure dev_name is null-terminatedVlad Buslov1-1/+1
Even though net_device->name is guaranteed to be null-terminated string of size<=IFNAMSIZ, the test robot complains that return value of netdev_name() can be larger: In file included from include/trace/define_trace.h:102, from drivers/net/ethernet/mellanox/mlx5/core/esw/diag/bridge_tracepoint.h:113, from drivers/net/ethernet/mellanox/mlx5/core/esw/bridge.c:12: drivers/net/ethernet/mellanox/mlx5/core/esw/diag/bridge_tracepoint.h: In function 'trace_event_raw_event_mlx5_esw_bridge_fdb_template': >> drivers/net/ethernet/mellanox/mlx5/core/esw/diag/bridge_tracepoint.h:24:29: warning: 'strncpy' output may be truncated copying 16 bytes from a string of length 20 [-Wstringop-truncation] 24 | strncpy(__entry->dev_name, | ^~~~~~~~~~~~~~~~~~~~~~~~~~ 25 | netdev_name(fdb->dev), | ~~~~~~~~~~~~~~~~~~~~~~ 26 | IFNAMSIZ); | ~~~~~~~~~ This is caused by the fact that default value of IFNAMSIZ is 16, while placeholder value that is returned by netdev_name() for unnamed net devices is larger than that. The offending code is in a tracing function that is only called for mlx5 representors, so there is no straightforward way to reproduce the issue but let's fix it for correctness sake by replacing strncpy() with strscpy() to ensure that resulting string is always null-terminated. Fixes: 9724fd5d9c2a ("net/mlx5: Bridge, add tracepoints") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-02-01net/mlx5: Bridge, take rtnl lock in init error handlerVlad Buslov2-0/+6
The mlx5_esw_bridge_cleanup() is expected to be called with rtnl lock taken, which is true for mlx5e_rep_bridge_cleanup() function but not for error handling code in mlx5e_rep_bridge_init(). Add missing rtnl lock/unlock calls and extend both mlx5_esw_bridge_cleanup() and its dual function mlx5_esw_bridge_init() with ASSERT_RTNL() to verify the invariant from now on. Fixes: 7cd6a54a8285 ("net/mlx5: Bridge, handle FDB events") Fixes: 19e9bfa044f3 ("net/mlx5: Bridge, add offload infrastructure") Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-02-01Merge branch '40GbE' of ↵Jakub Kicinski2-2/+30
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-01-31 This series contains updates to i40e driver only. Jedrzej fixes a condition check which would cause an error when resetting bandwidth when DCB is active with one TC. Karen resolves a null pointer dereference that could occur when removing the driver while VSI rings are being disabled. * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: i40e: Fix reset path while removing the driver i40e: Fix reset bw limit when DCB enabled with 1 TC ==================== Link: https://lore.kernel.org/r/20220201000522.505909-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-01net: macsec: Verify that send_sci is on when setting Tx sci explicitlyLior Nahmanson1-0/+9
When setting Tx sci explicit, the Rx side is expected to use this sci and not recalculate it from the packet.However, in case of Tx sci is explicit and send_sci is off, the receiver is wrongly recalculate the sci from the source MAC address which most likely be different than the explicit sci. Fix by preventing such configuration when macsec newlink is established and return EINVAL error code on such cases. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Lior Nahmanson <liorna@nvidia.com> Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Raed Salem <raeds@nvidia.com> Link: https://lore.kernel.org/r/1643542672-29403-1-git-send-email-raeds@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-01ipheth: fix EOVERFLOW in ipheth_rcvbulk_callbackGeorgi Valkov1-3/+3
When rx_buf is allocated we need to account for IPHETH_IP_ALIGN, which reduces the usable size by 2 bytes. Otherwise we have 1512 bytes usable instead of 1514, and if we receive more than 1512 bytes, ipheth_rcvbulk_callback is called with status -EOVERFLOW, after which the driver malfunctiones and all communication stops. Resolves ipheth 2-1:4.2: ipheth_rcvbulk_callback: urb status: -75 Fixes: f33d9e2b48a3 ("usbnet: ipheth: fix connectivity with iOS 14") Signed-off-by: Georgi Valkov <gvalkov@abv.bg> Tested-by: Jan Kiszka <jan.kiszka@siemens.com> Link: https://lore.kernel.org/all/B60B8A4B-92A0-49B3-805D-809A2433B46C@abv.bg/ Link: https://lore.kernel.org/all/24851bd2769434a5fc24730dce8e8a984c5a4505.1643699778.git.jan.kiszka@siemens.com/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-01tcp: fix mem under-charging with zerocopy sendmsg()Eric Dumazet1-2/+5
We got reports of following warning in inet_sock_destruct() WARN_ON(sk_forward_alloc_get(sk)); Whenever we add a non zero-copy fragment to a pure zerocopy skb, we have to anticipate that whole skb->truesize will be uncharged when skb is finally freed. skb->data_len is the payload length. But the memory truesize estimated by __zerocopy_sg_from_iter() is page aligned. Fixes: 9b65b17db723 ("net: avoid double accounting for pure zerocopy skbs") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Talal Ahmad <talalahmad@google.com> Cc: Arjun Roy <arjunroy@google.com> Cc: Willem de Bruijn <willemb@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Link: https://lore.kernel.org/r/20220201065254.680532-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-01af_packet: fix data-race in packet_setsockopt / packet_setsockoptEric Dumazet1-2/+6
When packet_setsockopt( PACKET_FANOUT_DATA ) reads po->fanout, no lock is held, meaning that another thread can change po->fanout. Given that po->fanout can only be set once during the socket lifetime (it is only cleared from fanout_release()), we can use READ_ONCE()/WRITE_ONCE() to document the race. BUG: KCSAN: data-race in packet_setsockopt / packet_setsockopt write to 0xffff88813ae8e300 of 8 bytes by task 14653 on cpu 0: fanout_add net/packet/af_packet.c:1791 [inline] packet_setsockopt+0x22fe/0x24a0 net/packet/af_packet.c:3931 __sys_setsockopt+0x209/0x2a0 net/socket.c:2180 __do_sys_setsockopt net/socket.c:2191 [inline] __se_sys_setsockopt net/socket.c:2188 [inline] __x64_sys_setsockopt+0x62/0x70 net/socket.c:2188 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff88813ae8e300 of 8 bytes by task 14654 on cpu 1: packet_setsockopt+0x691/0x24a0 net/packet/af_packet.c:3935 __sys_setsockopt+0x209/0x2a0 net/socket.c:2180 __do_sys_setsockopt net/socket.c:2191 [inline] __se_sys_setsockopt net/socket.c:2188 [inline] __x64_sys_setsockopt+0x62/0x70 net/socket.c:2188 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0x0000000000000000 -> 0xffff888106f8c000 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 14654 Comm: syz-executor.3 Not tainted 5.16.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Fixes: 47dceb8ecdc1 ("packet: add classic BPF fanout mode") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Link: https://lore.kernel.org/r/20220201022358.330621-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-01rtnetlink: make sure to refresh master_dev/m_ops in __rtnl_newlink()Eric Dumazet1-2/+4
While looking at one unrelated syzbot bug, I found the replay logic in __rtnl_newlink() to potentially trigger use-after-free. It is better to clear master_dev and m_ops inside the loop, in case we have to replay it. Fixes: ba7d49b1f0f8 ("rtnetlink: provide api for getting and setting slave info") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20220201012106.216495-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-01net: sched: fix use-after-free in tc_new_tfilter()Eric Dumazet1-4/+7
Whenever tc_new_tfilter() jumps back to replay: label, we need to make sure @q and @chain local variables are cleared again, or risk use-after-free as in [1] For consistency, apply the same fix in tc_ctl_chain() BUG: KASAN: use-after-free in mini_qdisc_pair_swap+0x1b9/0x1f0 net/sched/sch_generic.c:1581 Write of size 8 at addr ffff8880985c4b08 by task syz-executor.4/1945 CPU: 0 PID: 1945 Comm: syz-executor.4 Not tainted 5.17.0-rc1-syzkaller-00495-gff58831fa02d #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_address_description.constprop.0.cold+0x8d/0x336 mm/kasan/report.c:255 __kasan_report mm/kasan/report.c:442 [inline] kasan_report.cold+0x83/0xdf mm/kasan/report.c:459 mini_qdisc_pair_swap+0x1b9/0x1f0 net/sched/sch_generic.c:1581 tcf_chain_head_change_item net/sched/cls_api.c:372 [inline] tcf_chain0_head_change.isra.0+0xb9/0x120 net/sched/cls_api.c:386 tcf_chain_tp_insert net/sched/cls_api.c:1657 [inline] tcf_chain_tp_insert_unique net/sched/cls_api.c:1707 [inline] tc_new_tfilter+0x1e67/0x2350 net/sched/cls_api.c:2086 rtnetlink_rcv_msg+0x80d/0xb80 net/core/rtnetlink.c:5583 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2494 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline] netlink_unicast+0x539/0x7e0 net/netlink/af_netlink.c:1343 netlink_sendmsg+0x904/0xe00 net/netlink/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:705 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:725 ____sys_sendmsg+0x331/0x810 net/socket.c:2413 ___sys_sendmsg+0xf3/0x170 net/socket.c:2467 __sys_sendmmsg+0x195/0x470 net/socket.c:2553 __do_sys_sendmmsg net/socket.c:2582 [inline] __se_sys_sendmmsg net/socket.c:2579 [inline] __x64_sys_sendmmsg+0x99/0x100 net/socket.c:2579 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f2647172059 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f2645aa5168 EFLAGS: 00000246 ORIG_RAX: 0000000000000133 RAX: ffffffffffffffda RBX: 00007f2647285100 RCX: 00007f2647172059 RDX: 040000000000009f RSI: 00000000200002c0 RDI: 0000000000000006 RBP: 00007f26471cc08d R08: 0000000000000000 R09: 0000000000000000 R10: 9e00000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fffb3f7f02f R14: 00007f2645aa5300 R15: 0000000000022000 </TASK> Allocated by task 1944: kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38 kasan_set_track mm/kasan/common.c:45 [inline] set_alloc_info mm/kasan/common.c:436 [inline] ____kasan_kmalloc mm/kasan/common.c:515 [inline] ____kasan_kmalloc mm/kasan/common.c:474 [inline] __kasan_kmalloc+0xa9/0xd0 mm/kasan/common.c:524 kmalloc_node include/linux/slab.h:604 [inline] kzalloc_node include/linux/slab.h:726 [inline] qdisc_alloc+0xac/0xa10 net/sched/sch_generic.c:941 qdisc_create.constprop.0+0xce/0x10f0 net/sched/sch_api.c:1211 tc_modify_qdisc+0x4c5/0x1980 net/sched/sch_api.c:1660 rtnetlink_rcv_msg+0x413/0xb80 net/core/rtnetlink.c:5592 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2494 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline] netlink_unicast+0x539/0x7e0 net/netlink/af_netlink.c:1343 netlink_sendmsg+0x904/0xe00 net/netlink/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:705 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:725 ____sys_sendmsg+0x331/0x810 net/socket.c:2413 ___sys_sendmsg+0xf3/0x170 net/socket.c:2467 __sys_sendmmsg+0x195/0x470 net/socket.c:2553 __do_sys_sendmmsg net/socket.c:2582 [inline] __se_sys_sendmmsg net/socket.c:2579 [inline] __x64_sys_sendmmsg+0x99/0x100 net/socket.c:2579 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae Freed by task 3609: kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38 kasan_set_track+0x21/0x30 mm/kasan/common.c:45 kasan_set_free_info+0x20/0x30 mm/kasan/generic.c:370 ____kasan_slab_free mm/kasan/common.c:366 [inline] ____kasan_slab_free+0x130/0x160 mm/kasan/common.c:328 kasan_slab_free include/linux/kasan.h:236 [inline] slab_free_hook mm/slub.c:1728 [inline] slab_free_freelist_hook+0x8b/0x1c0 mm/slub.c:1754 slab_free mm/slub.c:3509 [inline] kfree+0xcb/0x280 mm/slub.c:4562 rcu_do_batch kernel/rcu/tree.c:2527 [inline] rcu_core+0x7b8/0x1540 kernel/rcu/tree.c:2778 __do_softirq+0x29b/0x9c2 kernel/softirq.c:558 Last potentially related work creation: kasan_save_stack+0x1e/0x40 mm/kasan/common.c:38 __kasan_record_aux_stack+0xbe/0xd0 mm/kasan/generic.c:348 __call_rcu kernel/rcu/tree.c:3026 [inline] call_rcu+0xb1/0x740 kernel/rcu/tree.c:3106 qdisc_put_unlocked+0x6f/0x90 net/sched/sch_generic.c:1109 tcf_block_release+0x86/0x90 net/sched/cls_api.c:1238 tc_new_tfilter+0xc0d/0x2350 net/sched/cls_api.c:2148 rtnetlink_rcv_msg+0x80d/0xb80 net/core/rtnetlink.c:5583 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2494 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline] netlink_unicast+0x539/0x7e0 net/netlink/af_netlink.c:1343 netlink_sendmsg+0x904/0xe00 net/netlink/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:705 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:725 ____sys_sendmsg+0x331/0x810 net/socket.c:2413 ___sys_sendmsg+0xf3/0x170 net/socket.c:2467 __sys_sendmmsg+0x195/0x470 net/socket.c:2553 __do_sys_sendmmsg net/socket.c:2582 [inline] __se_sys_sendmmsg net/socket.c:2579 [inline] __x64_sys_sendmmsg+0x99/0x100 net/socket.c:2579 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae The buggy address belongs to the object at ffff8880985c4800 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 776 bytes inside of 1024-byte region [ffff8880985c4800, ffff8880985c4c00) The buggy address belongs to the page: page:ffffea0002617000 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x985c0 head:ffffea0002617000 order:3 compound_mapcount:0 compound_pincount:0 flags: 0xfff00000010200(slab|head|node=0|zone=1|lastcpupid=0x7ff) raw: 00fff00000010200 0000000000000000 dead000000000122 ffff888010c41dc0 raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected page_owner tracks the page as allocated page last allocated via order 3, migratetype Unmovable, gfp_mask 0x1d20c0(__GFP_IO|__GFP_FS|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_NOMEMALLOC|__GFP_HARDWALL), pid 1941, ts 1038999441284, free_ts 1033444432829 prep_new_page mm/page_alloc.c:2434 [inline] get_page_from_freelist+0xa72/0x2f50 mm/page_alloc.c:4165 __alloc_pages+0x1b2/0x500 mm/page_alloc.c:5389 alloc_pages+0x1aa/0x310 mm/mempolicy.c:2271 alloc_slab_page mm/slub.c:1799 [inline] allocate_slab mm/slub.c:1944 [inline] new_slab+0x28a/0x3b0 mm/slub.c:2004 ___slab_alloc+0x87c/0xe90 mm/slub.c:3018 __slab_alloc.constprop.0+0x4d/0xa0 mm/slub.c:3105 slab_alloc_node mm/slub.c:3196 [inline] slab_alloc mm/slub.c:3238 [inline] __kmalloc+0x2fb/0x340 mm/slub.c:4420 kmalloc include/linux/slab.h:586 [inline] kzalloc include/linux/slab.h:715 [inline] __register_sysctl_table+0x112/0x1090 fs/proc/proc_sysctl.c:1335 neigh_sysctl_register+0x2c8/0x5e0 net/core/neighbour.c:3787 devinet_sysctl_register+0xb1/0x230 net/ipv4/devinet.c:2618 inetdev_init+0x286/0x580 net/ipv4/devinet.c:278 inetdev_event+0xa8a/0x15d0 net/ipv4/devinet.c:1532 notifier_call_chain+0xb5/0x200 kernel/notifier.c:84 call_netdevice_notifiers_info+0xb5/0x130 net/core/dev.c:1919 call_netdevice_notifiers_extack net/core/dev.c:1931 [inline] call_netdevice_notifiers net/core/dev.c:1945 [inline] register_netdevice+0x1073/0x1500 net/core/dev.c:9698 veth_newlink+0x59c/0xa90 drivers/net/veth.c:1722 page last free stack trace: reset_page_owner include/linux/page_owner.h:24 [inline] free_pages_prepare mm/page_alloc.c:1352 [inline] free_pcp_prepare+0x374/0x870 mm/page_alloc.c:1404 free_unref_page_prepare mm/page_alloc.c:3325 [inline] free_unref_page+0x19/0x690 mm/page_alloc.c:3404 release_pages+0x748/0x1220 mm/swap.c:956 tlb_batch_pages_flush mm/mmu_gather.c:50 [inline] tlb_flush_mmu_free mm/mmu_gather.c:243 [inline] tlb_flush_mmu+0xe9/0x6b0 mm/mmu_gather.c:250 zap_pte_range mm/memory.c:1441 [inline] zap_pmd_range mm/memory.c:1490 [inline] zap_pud_range mm/memory.c:1519 [inline] zap_p4d_range mm/memory.c:1540 [inline] unmap_page_range+0x1d1d/0x2a30 mm/memory.c:1561 unmap_single_vma+0x198/0x310 mm/memory.c:1606 unmap_vmas+0x16b/0x2f0 mm/memory.c:1638 exit_mmap+0x201/0x670 mm/mmap.c:3178 __mmput+0x122/0x4b0 kernel/fork.c:1114 mmput+0x56/0x60 kernel/fork.c:1135 exit_mm kernel/exit.c:507 [inline] do_exit+0xa3c/0x2a30 kernel/exit.c:793 do_group_exit+0xd2/0x2f0 kernel/exit.c:935 __do_sys_exit_group kernel/exit.c:946 [inline] __se_sys_exit_group kernel/exit.c:944 [inline] __x64_sys_exit_group+0x3a/0x50 kernel/exit.c:944 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae Memory state around the buggy address: ffff8880985c4a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8880985c4a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8880985c4b00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8880985c4b80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8880985c4c00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc Fixes: 470502de5bdb ("net: sched: unlock rules update API") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Vlad Buslov <vladbu@mellanox.com> Cc: Jiri Pirko <jiri@mellanox.com> Cc: Cong Wang <xiyou.wangcong@gmail.com> Reported-by: syzbot <syzkaller@googlegroups.com> Link: https://lore.kernel.org/r/20220131172018.3704490-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-01ethernet: smc911x: fix indentation in get/set EEPROMJakub Kicinski1-4/+4
Build bot produced a smatch indentation warning, the code looks correct but it mixes spaces and tabs. Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/20220131211730.3940875-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-01e1000e: Handshake with CSME starts from ADL platformsSasha Neftin1-2/+4
Handshake with CSME/AMT on none provisioned platforms during S0ix flow is not supported on TGL platform and can cause to HW unit hang. Update the handshake with CSME flow to start from the ADL platform. Fixes: 3e55d231716e ("e1000e: Add handshake with the CSME to support S0ix") Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-02-01e1000e: Separate ADP board type from TGPSasha Neftin3-17/+40
We have the same LAN controller on different PCH's. Separate ADP board type from a TGP which will allow for specific fixes to be applied for ADP platforms. Suggested-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-02-01net: phy: Fix qca8081 with speeds lower than 2.5Gb/sJonathan McDowell1-13/+13
A typo in qca808x_read_status means we try to set SMII mode on the port rather than SGMII when the link speed is not 2.5Gb/s. This results in no traffic due to the mismatch in configuration between the phy and the mac. v2: Only change interface mode when the link is up Fixes: 79c7bc0521545 ("net: phy: add qca8081 read_status") Cc: stable@vger.kernel.org Signed-off-by: Jonathan McDowell <noodles@earth.li> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-31net: macsec: Fix offload support for NETDEV_UNREGISTER eventLior Nahmanson1-12/+12
Current macsec netdev notify handler handles NETDEV_UNREGISTER event by releasing relevant SW resources only, this causes resources leak in case of macsec HW offload, as the underlay driver was not notified to clean it's macsec offload resources. Fix by calling the underlay driver to clean it's relevant resources by moving offload handling from macsec_dellink() to macsec_common_dellink() when handling NETDEV_UNREGISTER event. Fixes: 3cf3227a21d1 ("net: macsec: hardware offloading infrastructure") Signed-off-by: Lior Nahmanson <liorna@nvidia.com> Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Raed Salem <raeds@nvidia.com> Reviewed-by: Antoine Tenart <atenart@kernel.org> Link: https://lore.kernel.org/r/1643542141-28956-1-git-send-email-raeds@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-31net: stmmac: dump gmac4 DMA registers correctlyCamel Guo2-2/+18
Unlike gmac100, gmac1000, gmac4 has 27 DMA registers and they are located at DMA_CHAN_BASE_ADDR (0x1100). In order for ethtool to dump gmac4 DMA registers correctly, this commit checks if a net_device has gmac4 and uses different logic to dump its DMA registers. This fixes the following KASAN warning, which can normally be triggered by a command similar like "ethtool -d eth0": BUG: KASAN: vmalloc-out-of-bounds in dwmac4_dump_dma_regs+0x6d4/0xb30 Write of size 4 at addr ffffffc010177100 by task ethtool/1839 kasan_report+0x200/0x21c __asan_report_store4_noabort+0x34/0x60 dwmac4_dump_dma_regs+0x6d4/0xb30 stmmac_ethtool_gregs+0x110/0x204 ethtool_get_regs+0x200/0x4b0 dev_ethtool+0x1dac/0x3800 dev_ioctl+0x7c0/0xb50 sock_ioctl+0x298/0x6c4 ... Fixes: fbf68229ffe7 ("net: stmmac: unify registers dumps methods") Signed-off-by: Camel Guo <camelg@axis.com> Link: https://lore.kernel.org/r/20220131083841.3346801-1-camel.guo@axis.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-31net: dsa: mt7530: make NET_DSA_MT7530 select MEDIATEK_GE_PHYArınç ÜNAL1-0/+1
Make MediaTek MT753x DSA driver enable MediaTek Gigabit PHYs driver to properly control MT7530 and MT7531 switch PHYs. A noticeable change is that the behaviour of switchport interfaces going up-down-up-down is no longer there. Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch") Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220129062703.595-1-arinc.unal@arinc9.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-31i40e: Fix reset path while removing the driverKaren Sornek2-1/+19
Fix the crash in kernel while dereferencing the NULL pointer, when the driver is unloaded and simultaneously the VSI rings are being stopped. The hardware requires 50msec in order to finish RX queues disable. For this purpose the driver spins in mdelay function for the operation to be completed. For example changing number of queues which requires reset would fail in the following call stack: 1) i40e_prep_for_reset 2) i40e_pf_quiesce_all_vsi 3) i40e_quiesce_vsi 4) i40e_vsi_close 5) i40e_down 6) i40e_vsi_stop_rings 7) i40e_vsi_control_rx -> disable requires the delay of 50msecs 8) continue back in i40e_down function where i40e_clean_tx_ring(vsi->tx_rings[i]) is going to crash When the driver was spinning vsi_release called i40e_vsi_free_arrays where the vsi->tx_rings resources were freed and the pointer was set to NULL. Fixes: 5b6d4a7f20b0 ("i40e: Fix crash during removing i40e driver") Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com> Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Signed-off-by: Karen Sornek <karen.sornek@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-01-31i40e: Fix reset bw limit when DCB enabled with 1 TCJedrzej Jagielski1-1/+11
There was an AQ error I40E_AQ_RC_EINVAL when trying to reset bw limit as part of bw allocation setup. This was caused by trying to reset bw limit with DCB enabled. Bw limit should not be reset when DCB is enabled. The code was relying on the pf->flags to check if DCB is enabled but if only 1 TC is available this flag will not be set even though DCB is enabled. Add a check for number of TC and if it is 1 don't try to reset bw limit even if pf->flags shows DCB as disabled. Fixes: fa38e30ac73f ("i40e: Fix for Tx timeouts when interface is brought up if DCB is enabled") Suggested-by: Alexander Lobakin <alexandr.lobakin@intel.com> # Flatten the condition Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com> Tested-by: Imam Hassan Reza Biswas <imam.hassan.reza.biswas@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-01-31net/smc: Forward wakeup to smc socket waitqueue after fallbackWen Gu2-16/+137
When we replace TCP with SMC and a fallback occurs, there may be some socket waitqueue entries remaining in smc socket->wq, such as eppoll_entries inserted by userspace applications. After the fallback, data flows over TCP/IP and only clcsocket->wq will be woken up. Applications can't be notified by the entries which were inserted in smc socket->wq before fallback. So we need a mechanism to wake up smc socket->wq at the same time if some entries remaining in it. The current workaround is to transfer the entries from smc socket->wq to clcsock->wq during the fallback. But this may cause a crash like this: general protection fault, probably for non-canonical address 0xdead000000000100: 0000 [#1] PREEMPT SMP PTI CPU: 3 PID: 0 Comm: swapper/3 Kdump: loaded Tainted: G E 5.16.0+ #107 RIP: 0010:__wake_up_common+0x65/0x170 Call Trace: <IRQ> __wake_up_common_lock+0x7a/0xc0 sock_def_readable+0x3c/0x70 tcp_data_queue+0x4a7/0xc40 tcp_rcv_established+0x32f/0x660 ? sk_filter_trim_cap+0xcb/0x2e0 tcp_v4_do_rcv+0x10b/0x260 tcp_v4_rcv+0xd2a/0xde0 ip_protocol_deliver_rcu+0x3b/0x1d0 ip_local_deliver_finish+0x54/0x60 ip_local_deliver+0x6a/0x110 ? tcp_v4_early_demux+0xa2/0x140 ? tcp_v4_early_demux+0x10d/0x140 ip_sublist_rcv_finish+0x49/0x60 ip_sublist_rcv+0x19d/0x230 ip_list_rcv+0x13e/0x170 __netif_receive_skb_list_core+0x1c2/0x240 netif_receive_skb_list_internal+0x1e6/0x320 napi_complete_done+0x11d/0x190 mlx5e_napi_poll+0x163/0x6b0 [mlx5_core] __napi_poll+0x3c/0x1b0 net_rx_action+0x27c/0x300 __do_softirq+0x114/0x2d2 irq_exit_rcu+0xb4/0xe0 common_interrupt+0xba/0xe0 </IRQ> <TASK> The crash is caused by privately transferring waitqueue entries from smc socket->wq to clcsock->wq. The owners of these entries, such as epoll, have no idea that the entries have been transferred to a different socket wait queue and still use original waitqueue spinlock (smc socket->wq.wait.lock) to make the entries operation exclusive, but it doesn't work. The operations to the entries, such as removing from the waitqueue (now is clcsock->wq after fallback), may cause a crash when clcsock waitqueue is being iterated over at the moment. This patch tries to fix this by no longer transferring wait queue entries privately, but introducing own implementations of clcsock's callback functions in fallback situation. The callback functions will forward the wakeup to smc socket->wq if clcsock->wq is actually woken up and smc socket->wq has remaining entries. Fixes: 2153bd1e3d3d ("net/smc: Transfer remaining wait queue entries during fallback") Suggested-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Wen Gu <guwen@linux.alibaba.com> Acked-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-28net: stmmac: properly handle with runtime pm in stmmac_dvr_remove()Jisheng Zhang1-2/+4
There are two issues with runtime pm handling in stmmac_dvr_remove(): 1. the mac is runtime suspended before stopping dma and rx/tx. We need to ensure the device is properly resumed back. 2. the stmmaceth clk enable/disable isn't balanced in both exit and error handling code path. Take the exit code path for example, when we unbind the driver or rmmod the driver module, the mac is runtime suspended as said above, so the stmmaceth clk is disabled, but stmmac_dvr_remove() stmmac_remove_config_dt() clk_disable_unprepare() CCF will complain this time. The error handling code path suffers from the similar situtaion. Here are kernel warnings in error handling code path on Allwinner D1 platform: [ 1.604695] ------------[ cut here ]------------ [ 1.609328] bus-emac already disabled [ 1.613015] WARNING: CPU: 0 PID: 38 at drivers/clk/clk.c:952 clk_core_disable+0xcc/0xec [ 1.621039] CPU: 0 PID: 38 Comm: kworker/u2:1 Not tainted 5.14.0-rc4#1 [ 1.627653] Hardware name: Allwinner D1 NeZha (DT) [ 1.632443] Workqueue: events_unbound deferred_probe_work_func [ 1.638286] epc : clk_core_disable+0xcc/0xec [ 1.642561] ra : clk_core_disable+0xcc/0xec [ 1.646835] epc : ffffffff8023c2ec ra : ffffffff8023c2ec sp : ffffffd00411bb10 [ 1.654054] gp : ffffffff80ec9988 tp : ffffffe00143a800 t0 : ffffffff80ed6a6f [ 1.661272] t1 : ffffffff80ed6a60 t2 : 0000000000000000 s0 : ffffffe001509e00 [ 1.668489] s1 : 0000000000000001 a0 : 0000000000000019 a1 : ffffffff80e80bd8 [ 1.675707] a2 : 00000000ffffefff a3 : 00000000000000f4 a4 : 0000000000000002 [ 1.682924] a5 : 0000000000000001 a6 : 0000000000000030 a7 : 00000000028f5c29 [ 1.690141] s2 : 0000000000000800 s3 : ffffffe001375000 s4 : ffffffe01fdf7a80 [ 1.697358] s5 : ffffffe001375010 s6 : ffffffff8001fc10 s7 : ffffffffffffffff [ 1.704577] s8 : 0000000000000001 s9 : ffffffff80ecb248 s10: ffffffe001b80000 [ 1.711794] s11: ffffffe001b80760 t3 : 0000000000000062 t4 : ffffffffffffffff [ 1.719012] t5 : ffffffff80e0f6d8 t6 : ffffffd00411b8f0 [ 1.724321] status: 8000000201800100 badaddr: 0000000000000000 cause: 0000000000000003 [ 1.732233] [<ffffffff8023c2ec>] clk_core_disable+0xcc/0xec [ 1.737810] [<ffffffff80240430>] clk_disable+0x38/0x78 [ 1.742956] [<ffffffff8001fc0c>] worker_thread+0x1a8/0x4d8 [ 1.748451] [<ffffffff8031a500>] stmmac_remove_config_dt+0x1c/0x4c [ 1.754646] [<ffffffff8031c8ec>] sun8i_dwmac_probe+0x378/0x82c [ 1.760484] [<ffffffff8001fc0c>] worker_thread+0x1a8/0x4d8 [ 1.765975] [<ffffffff8029a6c8>] platform_probe+0x64/0xf0 [ 1.771382] [<ffffffff8029833c>] really_probe.part.0+0x8c/0x30c [ 1.777305] [<ffffffff8029865c>] __driver_probe_device+0xa0/0x148 [ 1.783402] [<ffffffff8029873c>] driver_probe_device+0x38/0x138 [ 1.789324] [<ffffffff802989cc>] __device_attach_driver+0xd0/0x170 [ 1.795508] [<ffffffff802988f8>] __driver_attach_async_helper+0xbc/0xc0 [ 1.802125] [<ffffffff802965ac>] bus_for_each_drv+0x68/0xb4 [ 1.807701] [<ffffffff80298d1c>] __device_attach+0xd8/0x184 [ 1.813277] [<ffffffff802967b0>] bus_probe_device+0x98/0xbc [ 1.818852] [<ffffffff80297904>] deferred_probe_work_func+0x90/0xd4 [ 1.825122] [<ffffffff8001f8b8>] process_one_work+0x1e4/0x390 [ 1.830872] [<ffffffff8001fd80>] worker_thread+0x31c/0x4d8 [ 1.836362] [<ffffffff80026bf4>] kthreadd+0x94/0x188 [ 1.841335] [<ffffffff80026bf4>] kthreadd+0x94/0x188 [ 1.846304] [<ffffffff8001fa60>] process_one_work+0x38c/0x390 [ 1.852054] [<ffffffff80026564>] kthread+0x124/0x160 [ 1.857021] [<ffffffff8002643c>] set_kthread_struct+0x5c/0x60 [ 1.862770] [<ffffffff80001f08>] ret_from_syscall_rejected+0x8/0xc [ 1.868956] ---[ end trace 8d5c6046255f84a0 ]--- [ 1.873675] ------------[ cut here ]------------ [ 1.878366] bus-emac already unprepared [ 1.882378] WARNING: CPU: 0 PID: 38 at drivers/clk/clk.c:810 clk_core_unprepare+0xe4/0x168 [ 1.890673] CPU: 0 PID: 38 Comm: kworker/u2:1 Tainted: G W 5.14.0-rc4 #1 [ 1.898674] Hardware name: Allwinner D1 NeZha (DT) [ 1.903464] Workqueue: events_unbound deferred_probe_work_func [ 1.909305] epc : clk_core_unprepare+0xe4/0x168 [ 1.913840] ra : clk_core_unprepare+0xe4/0x168 [ 1.918375] epc : ffffffff8023d6cc ra : ffffffff8023d6cc sp : ffffffd00411bb10 [ 1.925593] gp : ffffffff80ec9988 tp : ffffffe00143a800 t0 : 0000000000000002 [ 1.932811] t1 : ffffffe01f743be0 t2 : 0000000000000040 s0 : ffffffe001509e00 [ 1.940029] s1 : 0000000000000001 a0 : 000000000000001b a1 : ffffffe00143a800 [ 1.947246] a2 : 0000000000000000 a3 : 00000000000000f4 a4 : 0000000000000001 [ 1.954463] a5 : 0000000000000000 a6 : 0000000005fce2a5 a7 : 0000000000000001 [ 1.961680] s2 : 0000000000000800 s3 : ffffffff80afeb90 s4 : ffffffe01fdf7a80 [ 1.968898] s5 : ffffffe001375010 s6 : ffffffff8001fc10 s7 : ffffffffffffffff [ 1.976115] s8 : 0000000000000001 s9 : ffffffff80ecb248 s10: ffffffe001b80000 [ 1.983333] s11: ffffffe001b80760 t3 : ffffffff80b39120 t4 : 0000000000000001 [ 1.990550] t5 : 0000000000000000 t6 : ffffffe001600002 [ 1.995859] status: 8000000201800120 badaddr: 0000000000000000 cause: 0000000000000003 [ 2.003771] [<ffffffff8023d6cc>] clk_core_unprepare+0xe4/0x168 [ 2.009609] [<ffffffff802403a0>] clk_unprepare+0x24/0x3c [ 2.014929] [<ffffffff8031a508>] stmmac_remove_config_dt+0x24/0x4c [ 2.021125] [<ffffffff8031c8ec>] sun8i_dwmac_probe+0x378/0x82c [ 2.026965] [<ffffffff8001fc0c>] worker_thread+0x1a8/0x4d8 [ 2.032463] [<ffffffff8029a6c8>] platform_probe+0x64/0xf0 [ 2.037871] [<ffffffff8029833c>] really_probe.part.0+0x8c/0x30c [ 2.043795] [<ffffffff8029865c>] __driver_probe_device+0xa0/0x148 [ 2.049892] [<ffffffff8029873c>] driver_probe_device+0x38/0x138 [ 2.055815] [<ffffffff802989cc>] __device_attach_driver+0xd0/0x170 [ 2.061999] [<ffffffff802988f8>] __driver_attach_async_helper+0xbc/0xc0 [ 2.068616] [<ffffffff802965ac>] bus_for_each_drv+0x68/0xb4 [ 2.074193] [<ffffffff80298d1c>] __device_attach+0xd8/0x184 [ 2.079769] [<ffffffff802967b0>] bus_probe_device+0x98/0xbc [ 2.085345] [<ffffffff80297904>] deferred_probe_work_func+0x90/0xd4 [ 2.091616] [<ffffffff8001f8b8>] process_one_work+0x1e4/0x390 [ 2.097367] [<ffffffff8001fd80>] worker_thread+0x31c/0x4d8 [ 2.102858] [<ffffffff80026bf4>] kthreadd+0x94/0x188 [ 2.107830] [<ffffffff80026bf4>] kthreadd+0x94/0x188 [ 2.112800] [<ffffffff8001fa60>] process_one_work+0x38c/0x390 [ 2.118551] [<ffffffff80026564>] kthread+0x124/0x160 [ 2.123520] [<ffffffff8002643c>] set_kthread_struct+0x5c/0x60 [ 2.129268] [<ffffffff80001f08>] ret_from_syscall_rejected+0x8/0xc [ 2.135455] ---[ end trace 8d5c6046255f84a1 ]--- Fixes: 5ec55823438e ("net: stmmac: add clocks management for gmac driver") Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-28Merge tag 'ieee802154-for-net-2022-01-28' of ↵David S. Miller6-10/+20
git://git.kernel.org/pub/scm/linux/kernel/git/sschmidt/wpan Stefan Schmidt says: ==================== pull-request: ieee802154 for net 2022-01-28 An update from ieee802154 for your *net* tree. A bunch of fixes in drivers, all from Miquel Raynal. Clarifying the default channel in hwsim, leak fixes in at86rf230 and ca8210 as well as a symbol duration fix for mcr20a. Topping up the driver fixes with better error codes in nl802154 and a cleanup in MAINTAINERS for an orphaned driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-28gve: fix the wrong AdminQ buffer queue index checkHaiyue Wang1-1/+1
The 'tail' and 'head' are 'unsigned int' type free-running count, when 'head' is overflow, the 'int i (= tail) < u32 head' will be false: Only '- loop 0: idx = 63' result is shown, so it needs to use 'int' type to compare, it can handle the overflow correctly. typedef uint32_t u32; int main() { u32 tail, head; int stail, shead; int i, loop; tail = 0xffffffff; head = 0x00000000; for (i = tail, loop = 0; i < head; i++) { unsigned int idx = i & 63; printf("+ loop %d: idx = %u\n", loop++, idx); } stail = tail; shead = head; for (i = stail, loop = 0; i < shead; i++) { unsigned int idx = i & 63; printf("- loop %d: idx = %u\n", loop++, idx); } return 0; } Fixes: 5cdad90de62c ("gve: Batch AQ commands for creating and destroying queues.") Signed-off-by: Haiyue Wang <haiyue.wang@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-28Merge branch 'ax25-fixes'David S. Miller4-5/+31
Duoming Zhou says: ==================== ax25: fix NPD and UAF bugs when detaching ax25 device There are NPD and UAF bugs when detaching ax25 device, we use lock and refcount to mitigate these bugs. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-28ax25: add refcount in ax25_dev to avoid UAF bugsDuoming Zhou4-2/+25
If we dereference ax25_dev after we call kfree(ax25_dev) in ax25_dev_device_down(), it will lead to concurrency UAF bugs. There are eight syscall functions suffer from UAF bugs, include ax25_bind(), ax25_release(), ax25_connect(), ax25_ioctl(), ax25_getname(), ax25_sendmsg(), ax25_getsockopt() and ax25_info_show(). One of the concurrency UAF can be shown as below: (USE) | (FREE) | ax25_device_event | ax25_dev_device_down ax25_bind | ... ... | kfree(ax25_dev) ax25_fillin_cb() | ... ax25_fillin_cb_from_dev() | ... | The root cause of UAF bugs is that kfree(ax25_dev) in ax25_dev_device_down() is not protected by any locks. When ax25_dev, which there are still pointers point to, is released, the concurrency UAF bug will happen. This patch introduces refcount into ax25_dev in order to guarantee that there are no pointers point to it when ax25_dev is released. Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-28ax25: improve the incomplete fix to avoid UAF and NPD bugsDuoming Zhou1-3/+6
The previous commit 1ade48d0c27d ("ax25: NPD bug when detaching AX25 device") introduce lock_sock() into ax25_kill_by_device to prevent NPD bug. But the concurrency NPD or UAF bug will occur, when lock_sock() or release_sock() dereferences the ax25_cb->sock. The NULL pointer dereference bug can be shown as below: ax25_kill_by_device() | ax25_release() | ax25_destroy_socket() | ax25_cb_del() ... | ... | ax25->sk=NULL; lock_sock(s->sk); //(1) | s->ax25_dev = NULL; | ... release_sock(s->sk); //(2) | ... | The root cause is that the sock is set to null before dereference site (1) or (2). Therefore, this patch extracts the ax25_cb->sock in advance, and uses ax25_list_lock to protect it, which can synchronize with ax25_cb_del() and ensure the value of sock is not null before dereference sites. The concurrency UAF bug can be shown as below: ax25_kill_by_device() | ax25_release() | ax25_destroy_socket() ... | ... | sock_put(sk); //FREE lock_sock(s->sk); //(1) | s->ax25_dev = NULL; | ... release_sock(s->sk); //(2) | ... | The root cause is that the sock is released before dereference site (1) or (2). Therefore, this patch uses sock_hold() to increase the refcount of sock and uses ax25_list_lock to protect it, which can synchronize with ax25_cb_del() in ax25_destroy_socket() and ensure the sock wil not be released before dereference sites. Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-28net: stmmac: dwmac-visconti: No change to ETHER_CLOCK_SEL for unexpected ↵Yuji Ishikawa1-2/+7
speed request. Variable clk_sel_val is not initialized in the default case of the first switch statement. In that case, the function should return immediately without any changes to the hardware. Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: b38dd98ff8d0 ("net: stmmac: Add Toshiba Visconti SoCs glue driver") Signed-off-by: Yuji Ishikawa <yuji2.ishikawa@toshiba.co.jp> Reviewed-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-27net: amd-xgbe: ensure to reset the tx_timer_active flagRaju Rangoju1-0/+2
Ensure to reset the tx_timer_active flag in xgbe_stop(), otherwise a port restart may result in tx timeout due to uncleared flag. Fixes: c635eaacbf77 ("amd-xgbe: Remove Tx coalescing") Co-developed-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Link: https://lore.kernel.org/r/20220127060222.453371-1-Raju.Rangoju@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfJakub Kicinski11-24/+249
Pablo Neira Ayuso says: ==================== Netfilter fixes for net 1) Remove leftovers from flowtable modules, from Geert Uytterhoeven. 2) Missing refcount increment of conntrack template in nft_ct, from Florian Westphal. 3) Reduce nft_zone selftest time, also from Florian. 4) Add selftest to cover stateless NAT on fragments, from Florian Westphal. 5) Do not set net_device when for reject packets from the bridge path, from Phil Sutter. 6) Cancel register tracking info on nft_byteorder operations. 7) Extend nft_concat_range selftest to cover set reload with no elements, from Florian Westphal. 8) Remove useless update of pointer in chain blob builder, reported by kbuild test robot. * git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf: netfilter: nf_tables: remove assignment with no effect in chain blob builder selftests: nft_concat_range: add test for reload with no element add/del netfilter: nft_byteorder: track register operations netfilter: nft_reject_bridge: Fix for missing reply from prerouting selftests: netfilter: check stateless nat udp checksum fixup selftests: netfilter: reduce zone stress test running time netfilter: nft_ct: fix use after free when attaching zone template netfilter: Remove flowtable relics ==================== Link: https://lore.kernel.org/r/20220127235235.656931-1-pablo@netfilter.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-27net: amd-xgbe: Fix skb data length underflowShyam Sundar S K1-1/+11
There will be BUG_ON() triggered in include/linux/skbuff.h leading to intermittent kernel panic, when the skb length underflow is detected. Fix this by dropping the packet if such length underflows are seen because of inconsistencies in the hardware descriptors. Fixes: 622c36f143fc ("amd-xgbe: Fix jumbo MTU processing on newer hardware") Suggested-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Link: https://lore.kernel.org/r/20220127092003.2812745-1-Shyam-sundar.S-k@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-27Merge tag 'net-5.17-rc2' of ↵Linus Torvalds94-397/+811
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from netfilter and can. Current release - new code bugs: - tcp: add a missing sk_defer_free_flush() in tcp_splice_read() - tcp: add a stub for sk_defer_free_flush(), fix CONFIG_INET=n - nf_tables: set last expression in register tracking area - nft_connlimit: fix memleak if nf_ct_netns_get() fails - mptcp: fix removing ids bitmap setting - bonding: use rcu_dereference_rtnl when getting active slave - fix three cases of sleep in atomic context in drivers: lan966x, gve - handful of build fixes for esoteric drivers after netdev->dev_addr was made const Previous releases - regressions: - revert "ipv6: Honor all IPv6 PIO Valid Lifetime values", it broke Linux compatibility with USGv6 tests - procfs: show net device bound packet types - ipv4: fix ip option filtering for locally generated fragments - phy: broadcom: hook up soft_reset for BCM54616S Previous releases - always broken: - ipv4: raw: lock the socket in raw_bind() - ipv4: decrease the use of shared IPID generator to decrease the chance of attackers guessing the values - procfs: fix cross-netns information leakage in /proc/net/ptype - ethtool: fix link extended state for big endian - bridge: vlan: fix single net device option dumping - ping: fix the sk_bound_dev_if match in ping_lookup" * tag 'net-5.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (86 commits) net: bridge: vlan: fix memory leak in __allowed_ingress net: socket: rename SKB_DROP_REASON_SOCKET_FILTER ipv4: remove sparse error in ip_neigh_gw4() ipv4: avoid using shared IP generator for connected sockets ipv4: tcp: send zero IPID in SYNACK messages ipv4: raw: lock the socket in raw_bind() MAINTAINERS: add missing IPv4/IPv6 header paths MAINTAINERS: add more files to eth PHY net: stmmac: dwmac-sun8i: use return val of readl_poll_timeout() net: bridge: vlan: fix single net device option dumping net: stmmac: skip only stmmac_ptp_register when resume from suspend net: stmmac: configure PTP clock source prior to PTP initialization Revert "ipv6: Honor all IPv6 PIO Valid Lifetime values" connector/cn_proc: Use task_is_in_init_pid_ns() pid: Introduce helper task_is_in_init_pid_ns() gve: Fix GFP flags when allocing pages net: lan966x: Fix sleep in atomic context when updating MAC table net: lan966x: Fix sleep in atomic context when injecting frames ethernet: seeq/ether3: don't write directly to netdev->dev_addr ethernet: 8390/etherh: don't write directly to netdev->dev_addr ...
2022-01-27net: bridge: vlan: fix memory leak in __allowed_ingressTim Yi1-3/+3
When using per-vlan state, if vlan snooping and stats are disabled, untagged or priority-tagged ingress frame will go to check pvid state. If the port state is forwarding and the pvid state is not learning/forwarding, untagged or priority-tagged frame will be dropped but skb memory is not freed. Should free skb when __allowed_ingress returns false. Fixes: a580c76d534c ("net: bridge: vlan: add per-vlan state") Signed-off-by: Tim Yi <tim.yi@pica8.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Link: https://lore.kernel.org/r/20220127074953.12632-1-tim.yi@pica8.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-28 23:13:22 +0000