summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2010-10-25Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6Linus Torvalds76-767/+1440
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6: (48 commits) [S390] topology: export cpu topology via proc/sysinfo [S390] topology: move topology sysinfo code [S390] topology: clean up facility detection [S390] cleanup facility list handling [S390] enable ARCH_DMA_ADDR_T_64BIT with 64BIT [S390] dasd: ignore unsolicited interrupts for DIAG [S390] kvm: Enable z196 instruction facilities [S390] dasd: fix unsolicited interrupt recognition [S390] dasd: fix use after free in dbf [S390] kvm: Fix badness at include/asm/mmu_context.h:83 [S390] cio: fix I/O cancel function [S390] topology: change default [S390] smp: use correct cpu address in print_cpu_info() [S390] remove ieee_instruction_pointer from thread_struct [S390] cleanup system call parameter setup [S390] correct alignment of cpuid structure [S390] cleanup lowcore access from external interrupts [S390] cleanup lowcore access from program checks [S390] pgtable: move pte_mkhuge() from hugetlb.h to pgtable.h [S390] fix SIGBUS handling ...
2010-10-25Merge branch 'for-linus' of ↵Linus Torvalds479-19477/+37901
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: (365 commits) ALSA: hda - Disable sticky PCM stream assignment for AD codecs ALSA: usb - Creative USB X-Fi volume knob support ALSA: ca0106: Use card specific dac id for mute controls. ALSA: ca0106: Allow different sound cards to use different SPI channel mappings. ALSA: ca0106: Create a nice spot for mapping channels to dacs. ALSA: ca0106: Move enabling of front dac out of hardcoded setup sequence. ALSA: ca0106: Pull out dac powering routine into separate function. ALSA: ca0106 - add Sound Blaster 5.1vx info. ASoC: tlv320dac33: Use usleep_range for delays ALSA: usb-audio: add Novation Launchpad support ALSA: hda - Add workarounds for CT-IBG controllers ALSA: hda - Fix wrong TLV mute bit for STAC/IDT codecs ASoC: tpa6130a2: Error handling for broken chip ASoC: max98088: Staticise m98088_eq_band ASoC: soc-core: Fix codec->name memory leak ALSA: hda - Apply ideapad quirk to Acer laptops with Cxt5066 ALSA: hda - Add some workarounds for Creative IBG ALSA: hda - Fix wrong SPDIF NID assignment for CA0110 ALSA: hda - Fix codec rename rules for ALC662-compatible codecs ALSA: hda - Add alc_init_jacks() call to other codecs ...
2010-10-25Merge branch 'for-upstream' of ↵Linus Torvalds22-8555/+3
git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb * 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb: uwb: Orphan the UWB and WUSB subsystems uwb: Remove the WLP subsystem and drivers
2010-10-25Merge branch 'for_linus' of ↵Linus Torvalds24-1035/+1370
git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86: (44 commits) eeepc-wmi: Add cpufv sysfs interface eeepc-wmi: add additional hotkeys panasonic-laptop: Simplify calls to acpi_pcc_retrieve_biosdata panasonic-laptop: Handle errors properly if they happen intel_pmic_gpio: fix off-by-one value range checking IBM Real-Time "SMI Free" mode driver -v7 Add OLPC XO-1 rfkill driver Move hdaps driver to platform/x86 ideapad-laptop: Fix Makefile intel_pmic_gpio: swap the bits and mask args for intel_scu_ipc_update_register ideapad: Add param: no_bt_rfkill ideapad: Change the driver name to ideapad-laptop ideapad: rewrite the sw rfkill set ideapad: rewrite the hw rfkill notify ideapad: use EC command to control camera ideapad: use return value of _CFG to tell if device exist or not ideapad: make sure we bind on the correct device ideapad: check VPC bit before sync rfkill hw status ideapad: add ACPI helpers dell-laptop: Add debugfs support ...
2010-10-25Merge branch 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds60-417/+800
* 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6: mtd/m25p80: add support to parse the partitions by OF node of/irq: of_irq.c needs to include linux/irq.h of/mips: Cleanup some include directives/files. of/mips: Add device tree support to MIPS of/flattree: Eliminate need to provide early_init_dt_scan_chosen_arch of/device: Rework to use common platform_device_alloc() for allocating devices of/xsysace: Fix OF probing on little-endian systems of: use __be32 types for big-endian device tree data of/irq: remove references to NO_IRQ in drivers/of/platform.c of/promtree: add package-to-path support to pdt of/promtree: add of_pdt namespace to pdt code of/promtree: no longer call prom_ functions directly; use an ops structure of/promtree: make drivers/of/pdt.c no longer sparc-only sparc: break out some PROM device-tree building code out into drivers/of of/sparc: convert various prom_* functions to use phandle sparc: stop exporting openprom.h header powerpc, of_serial: Endianness issues setting up the serial ports of: MTD: Fix OF probing on little-endian systems of: GPIO: Fix OF probing on little-endian systems
2010-10-25MIPS: MT: Fix build error iFPU affinity codeRalf Baechle1-1/+1
Commit b0ae19811375 ("security: remove unused parameter from security_task_setscheduler()") broke the build of arch/mips/kernel/mips-mt-fpaff.c. The function arguments were unnecessary, not the semicolon ... Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by: James Morris <jmorris@namei.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-25Merge branch 'ieee1394-removal' of ↵Linus Torvalds52-29325/+96
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'ieee1394-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: ieee1394: remove the old IEEE 1394 driver stack ieee1394: move init_ohci1394_dma to drivers/firewire/ Fix trivial change/delete conflict: drivers/ieee1394/eth1394.c is getting removed, but was modified by the networking merge.
2010-10-25Coda: replace BKL with mutexYoshihisa Abe4-50/+70
Replace the BKL with a mutex to protect the venus_comm structure which binds the mountpoint with the character device and holds the upcall queues. Signed-off-by: Yoshihisa Abe <yoshiabe@cs.cmu.edu> Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-25Coda: push BKL regions into coda_upcall()Yoshihisa Abe8-190/+96
Now that shared inode state is locked using the cii->c_lock, the BKL is only used to protect the upcall queues used to communicate with the userspace cache manager. The remaining state is all local and we can push the lock further down into coda_upcall(). Signed-off-by: Yoshihisa Abe <yoshiabe@cs.cmu.edu> Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-25Coda: add spin lock to protect accesses to struct coda_inode_info.Yoshihisa Abe7-17/+58
We mostly need it to protect cached user permissions. The c_flags field is advisory, reading the wrong value is harmless and in the worst case we hit a slow path where we have to make an extra upcall to the userspace cache manager when revalidating a dentry or inode. Signed-off-by: Yoshihisa Abe <yoshiabe@cs.cmu.edu> Signed-off-by: Jan Harkes <jaharkes@cs.cmu.edu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-25Merge branch 'for-linus' of ↵Linus Torvalds75-1845/+5781
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (75 commits) Input: wacom - specify Cinitq supported tools Input: ab8500-ponkey - fix IRQ freeing in error path Input: adp5588-keys - use more obvious i2c_device_id name string Input: ad7877 - switch to using threaded IRQ Input: ad7877 - use attribute group to control visibility of attributes Input: serio - add support for PS2Mult multiplexer protocol Input: wacom - properly enable runtime PM Input: ad7877 - filter events where pressure is beyond the maximum Input: ad7877 - implement EV_KEY:BTN_TOUCH reporting Input: ad7877 - implement specified chip select behavior Input: hp680_ts_input - use cancel_delayed_work_sync() Input: mousedev - correct lockdep annotation Input: ads7846 - switch to using threaded IRQ Input: serio - support multiple child devices per single parent Input: synaptics - simplify pass-through port handling Input: add ROHM BU21013 touch panel controller support Input: omap4-keypad - wake-up on events & long presses Input: omap4-keypad - fix interrupt line configuration Input: omap4-keypad - SYSCONFIG register configuration Input: omap4-keypad - use platform device helpers ...
2010-10-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds168-3056/+7265
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (110 commits) sh: i2c-sh7760: Replase from ctrl_* to __raw_* sh: clkfwk: Shuffle around to match the intc split up. sh: clkfwk: modify for_each_frequency end condition sh: fix clk_get() error handling sh: clkfwk: Fix fault in frequency iterator. sh: clkfwk: Add a helper for rate rounding by divisor ranges. sh: clkfwk: Abstract rate rounding helper. sh: clkfwk: support clock remapping. sh: pci: Convert to upper/lower_32_bits() helpers. sh: mach-sdk7786: Add support for the FPGA SRAM. sh: Provide a generic SRAM pool for tiny memories. sh: pci: Support secondary FPGA-driven PCIe clocks on SDK7786. sh: pci: Support slot 4 routing on SDK7786. sh: Fix up PMB locking. sh: mach-sdk7786: Add support for fpga gpios. sh: use pr_fmt for clock framework, too. sh: remove name and id from struct clk sh: free-without-alloc fix for sh_mobile_lcdcfb sh: perf: Set up perf_max_events. sh: perf: Support SH-X3 hardware counters. ... Fix up trivial conflicts (perf_max_events got removed) in arch/sh/kernel/perf_event.c
2010-10-25Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds8-47/+13
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: Revert "block: fix accounting bug on cross partition merges"
2010-10-25Merge branch 'for-linus' of ↵Linus Torvalds47-215/+707
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: (21 commits) m68knommu: convert to using tracehook_report_syscall_* m68knommu: some boards use fixed phy for FEC ethernet m68knommu: support the external GPIO based interrupts of the 5272 m68knommu: mask of vector bits in exception word properly m68knommu: change to new flag variables m68knommu: Fix MCFUART_TXFIFOSIZE for m548x. m68knommu: add basic mmu-less m548x support m68knommu: .gitignore vmlinux.lds m68knommu: stop using __do_IRQ m68knommu: rename PT_OFF_VECTOR to PT_OFF_FORMATVEC. m68knommu: add support for Coldfire 547x/548x interrupt controller m68k{nommu}: Remove unused DEFINE's from asm-offsets.c m68knommu: whitespace cleanup in 68328/entry.S m68knommu: Document supported chips in intc-2.c and intc-simr.c. m68knommu: fix strace support for 68328/68360 m68knommu: fix default starting date arch/m68knommu: Removing dead 68328_SERIAL_UART2 config option arch/m68knommu: Removing dead RAM_{16,32}_MB config option arch/m68knommu: Removing dead M68KFPU_EMU config option arch/m68knommu: Removing dead RELOCATE config option ...
2010-10-25[S390] topology: export cpu topology via proc/sysinfoHeiko Carstens3-3/+36
Export the cpu configuration topology via sysinfo. Two new lines are introduced: CPU Topology HW: 0 0 0 4 6 4 CPU Topology SW: 0 0 0 0 4 24 The HW line describes the cpu topology nesting levels when the maximum nesting level is used to get the corresponding SYSIB. The SW line describes what Linux is actually using. In this case it supports only two levels (CONFIG_SCHED_BOOK off) and therefore the hardware folded the two lower levels in the SYSIB response block. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25[S390] topology: move topology sysinfo codeHeiko Carstens2-54/+56
Move the topology sysinfo SYSIB definitions to the proper place in asm/sysinfo.h where they should be. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25[S390] topology: clean up facility detectionHeiko Carstens3-9/+10
Move cpu topology facility detection to early setup code where it should be. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25[S390] cleanup facility list handlingMartin Schwidefsky12-74/+66
Store the facility list once at system startup with stfl/stfle and reuse the result for all facility tests. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25[S390] enable ARCH_DMA_ADDR_T_64BIT with 64BITFUJITA Tomonori1-0/+3
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25[S390] dasd: ignore unsolicited interrupts for DIAGStefan Haberland1-9/+14
For the DASD DIAG discipline IO is started through special diagnose calls. Unsolicited interrupts may contain information about the device itself. But this information is not needed because the device is not used directly. Fix the case that an unimplemented dicipline function may be called by ignoring unsolicited interrupts for the DIAG disciplin. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25[S390] kvm: Enable z196 instruction facilitiesChristian Borntraeger1-1/+1
Enable PFPO, floating point extension, distinct-operands, fast-BCR-serialization, high-word, interlocked-access, load/store- on-condition, and population-count facilities for guests. (bits 37, 44 and 45). Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25[S390] dasd: fix unsolicited interrupt recognitionStefan Weinhuber2-41/+40
The dasd interrupt handler needs to distinguish solicited from unsolicited interrupts, as unsolicited interrupts may require special handling (e.g. summary unit checks) and solicited interrupts require proper error recovery for the failed I/O request. The interrupt handler needs to check several bit fields in the interrupt response block (irb) to make this distinction. So far our check of the status control bits has not been specific enough, which may lead to a failed request getting just retried instead of the necessary error recovery. Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25[S390] dasd: fix use after free in dbfSebastian Ott1-1/+0
Writing to /proc/dasd/statistics while the debug level of the generic dasd debug entry is set to DBF_DEBUG will lead to an use after free when accessing the debug entry later. Since for the format string "%s" in the s390 dbf only a pointer to the string is stored in the debug feature and the buffer used here is freed afterwards. To fix this just remove the debug message. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25[S390] kvm: Fix badness at include/asm/mmu_context.h:83Christian Borntraeger1-0/+2
commit 050eef364ad700590a605a0749f825cab4834b1e [S390] fix tlb flushing vs. concurrent /proc accesses broke KVM on s390x. On every schedule a Badness at include/asm/mmu_context.h:83 appears. s390_enable_sie replaces the mm on the __running__ task, therefore, we have to increase the attach count of the new mm. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25[S390] cio: fix I/O cancel functionPeter Oberparleiter2-2/+8
Function ccw_device_cancel_halt_clear may cause an unexpected kernel panic if a clear function is currently active at the subchannel for which it is called. In that case, the iretry counter used to determine the number of retries is never initialized, leading to an immediate failure of the function which results in a kernel panic. Fix this by initializing the iretry counter when the function is first called. Also replace the kernel panic with a return code: a single malfunctioning I/O device should not automatically cause a system-wide kernel panic. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25[S390] topology: change defaultHeiko Carstens2-4/+4
Switch default value of the kernel parameter 'topology' from off to on. Various performance measurements have finally shown that there are no (known) regressions anywhere. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25[S390] smp: use correct cpu address in print_cpu_info()Heiko Carstens1-1/+1
Up to now print_cpu_info() uses the cpu address stored in it's local lowcore to print a message to the console. The cpu address in the lowcore is (in this case) however not the physical cpu address of the local cpu. It's the address of the cpu that issued the sigp restart which started the local cpu. Fix this by using the store cpu address instruction instead. It's not that anybody really cares since this is broken since more than ten years... Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25[S390] remove ieee_instruction_pointer from thread_structMartin Schwidefsky4-7/+2
The ieee_instruction_pointer can not be read from user space anymore since git commit 613e1def6b52c399a8b72a5e11bc2e57d2546fb8, the ptrace interface always returns zero. Remove it from the thread_struct. It is still present in the user_regs_struct for compatability reasons. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25[S390] cleanup system call parameter setupMartin Schwidefsky3-9/+5
Do the setup of the stack overflow argument for the sixth system call parameter right before the branch to the system call function. That simplifies the system call parameter access code. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25[S390] correct alignment of cpuid structureMartin Schwidefsky1-1/+1
The store-cpu-id instruction has a minimum alignment of 8. Reflect that in the definition of struct cpuid. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25[S390] cleanup lowcore access from external interruptsMartin Schwidefsky15-49/+57
Read external interrupts parameters from the lowcore in the first level interrupt handler in entry[64].S. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25[S390] cleanup lowcore access from program checksMartin Schwidefsky6-172/+110
Read all required fields for program checks from the lowcore in the first level interrupt handler in entry[64].S. If the context that caused the fault was enabled for interrupts we can now re-enable the irqs in entry[64].S. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25[S390] pgtable: move pte_mkhuge() from hugetlb.h to pgtable.hHeiko Carstens2-26/+28
All architectures besides s390 have pte_mkhuge() defined in pgtable.h. So move the function to pgtable.h on s390 as well. Fixes a compile error introduced with "hugetlb: hugepage migration core" in linux-next which only happens on s390. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25[S390] fix SIGBUS handlingMartin Schwidefsky1-3/+11
Raise SIGBUS with a siginfo structure. Deliver BUS_ADRERR as si_code and the address of the fault in the si_addr field. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25[S390] cio: notify drivers of channel path eventsSebastian Ott5-8/+75
This patch adds a notification mechanism to inform ccw drivers about changes to channel paths, which occured while the device is online. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25[S390] css: update subchannel description after hibernateSebastian Ott1-0/+1
Update the subchannel descriptor while resuming from hibernate in order to obtain current link addresses. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25[S390] css: update descriptor after hibernateSebastian Ott2-2/+12
Update the channel path descriptors after hibernation. This is done unlocked, since we are the only active task at this time. Note: chsc_determine_base_channel_path_desc is changed to use spin_lock_irqsave, since it's called with interrupts disabled in this case. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25[S390] cio: update descriptor in chsc_chp_varySebastian Ott3-9/+11
Update the channel path descriptor at the beginning of to the vary_on operation. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25[S390] chsc: use the global page to determine the chp desriptorSebastian Ott3-44/+44
chsc_determine_channel_path_desc is called by a wrapper who allocates a response struct. The response data is then memcpy'ed to this response struct by chsc_determine_channel_path_desc. Change chsc_determine_base_channel_path_desc to use the global chsc_page and deliver it to the function doing the actual chsc call. The channel path desriptor is then directly read from the response data. As a result we get rid of the additional allocation for the response struct. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25[S390] chsc: consolidate memory allocationsSebastian Ott3-136/+116
Most wrappers around the channel subsystem call have their own logic to allocate memory (with proper alignment) or use preallocated or static memory. This patch converts most users of the channel subsystem call to use the same preallocated page (proteced by a spinlock). Note: The sei_page which is used in our crw handler to call "store event information" has to coexist, since a) in crw context, while accessing the sei_page, sleeping is allowed (which will conflict with the spinlock protection of the chsc_page) b) in crw context, while accessing the sei_page, channel subsystem calls are allowed (which itself would require the page). Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25[S390] chsc: initialization fixesSebastian Ott3-17/+17
This patch fixes: * kfree vs. free_page usage * structure definition for determine_css_characteristics * naming convention for the chsc init function * deregistration of crw handlers in the cleanup path Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25[S390] cio: add lock to struct channel_pathSebastian Ott2-14/+27
Serialize access to members of struct channel_path with a mutex. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25[S390] cio: fix memleak in resume pathSebastian Ott1-2/+6
If a ccwdevice is lost during hibernation and a different ccwdevice is attached to the same subchannel, we will deregister the old ccw device and register the new one. Since deregistration is not allowed in this context, we handle this action later. However, some parts of the registration process for the new device were started anyway, so that the old device structure is no longer accessible. Fix this by deferring both actions to the afterwards scheduled subchannel event. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25[S390] cio: remove custom implementation of hex_to_bin()Andy Shevchenko1-6/+4
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25[S390] dasd fix dump_sense_dbfStefan Haberland1-6/+10
The dasd_eckd_dump_sense_dbf function uses a macro for s390 debug feature that can handle up to 8 parameters (for the DASD device driver). Fix the function to use only the maximum number of parameters. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25[S390] css: fix sparse warningSebastian Ott1-1/+1
fix this sparse warning: drivers/s390/cio/css.c:580:6: warning: symbol 'css_schedule_eval_all_unreg' was not declared. Should it be static? Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25[S390] hvc_iucv: do not call iucv_unregister if iucv_register failedHendrik Brueckner1-3/+1
If the iucv_register() functions fails, the error recovery calls iucv_unregister() which might cause the following stack backtrace: (<0000000000100ab2> show_trace+0xee/0x144) <00000000004f1842> panic+0xb6/0x248 <00000000001010a6> die+0x15a/0x16c <000000000011d936> do_no_context+0xa6/0xe4 <00000000004f84dc> do_protection_exception+0x2e8/0x3a4 <0000000000113afc> pgm_exit+0x0/0x14 <00000000004e786e> iucv_unregister+0x5a/0x17c (<00000000004e785e> iucv_unregister+0x4a/0x17c) <000000000076de74> hvc_iucv_init+0x228/0x5dc <00000000001000c2> do_one_initcall+0x3e/0x19c <00000000007524a2> kernel_init+0x28e/0x404 <0000000000105dd6> kernel_thread_starter+0x6/0xc <0000000000105dd0> kernel_thread_starter+0x0/0xc Remove the call to iucv_unregister() and remove the goto label as unregistering is the last step in the hvc_iucv initialization. If iucv_register() fails, simply clean up hvc terminals and free resources. Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25[S390] cmm: fix crash on case conversionHeiko Carstens1-1/+6
When the cmm module is compiled into the kernel it will crash when writing to the R/O data section. Reason is the lower to upper case conversion of the "sender" module parameter which ignored the fact that the pointer is preinitialized. Introduced with 41b42876 "cmm, smsgiucv_app: convert sender to uppercase" Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25[S390] drivers/s390/char: Use static const char arraysJoe Perches1-2/+2
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2010-10-25[S390] switch_to: get rid of prev == next checkHeiko Carstens1-2/+0
schedule() makes sure that prev != next before calling switch_to(). Therefore remove the redundant check. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>