summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2018-11-30hfsplus: do not free node before usingPan Bian1-1/+2
hfs_bmap_free() frees node via hfs_bnode_put(node). However it then reads node->this when dumping error message on an error path, which may result in a use-after-free bug. This patch frees node only when it is never used. Link: http://lkml.kernel.org/r/1543053441-66942-1-git-send-email-bianpan2016@163.com Signed-off-by: Pan Bian <bianpan2016@163.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Ernesto A. Fernandez <ernesto.mnd.fernandez@gmail.com> Cc: Joe Perches <joe@perches.com> Cc: Viacheslav Dubeyko <slava@dubeyko.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-30hfs: do not free node before usingPan Bian1-1/+2
hfs_bmap_free() frees the node via hfs_bnode_put(node). However, it then reads node->this when dumping error message on an error path, which may result in a use-after-free bug. This patch frees the node only when it is never again used. Link: http://lkml.kernel.org/r/1542963889-128825-1-git-send-email-bianpan2016@163.com Fixes: a1185ffa2fc ("HFS rewrite") Signed-off-by: Pan Bian <bianpan2016@163.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Joe Perches <joe@perches.com> Cc: Ernesto A. Fernandez <ernesto.mnd.fernandez@gmail.com> Cc: Viacheslav Dubeyko <slava@dubeyko.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-30proc: update MAINTAINERS with proc.txtAlexey Dobriyan1-0/+1
Turns out that /proc has official documentation and people even trying to keep it uptodate. Link: http://lkml.kernel.org/r/20181116134630.GA8004@avx2 Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-30mm/page_alloc.c: fix calculation of pgdat->nr_zonesWei Yang1-1/+3
init_currently_empty_zone() will adjust pgdat->nr_zones and set it to 'zone_idx(zone) + 1' unconditionally. This is correct in the normal case, while not exact in hot-plug situation. This function is used in two places: * free_area_init_core() * move_pfn_range_to_zone() In the first case, we are sure zone index increase monotonically. While in the second one, this is under users control. One way to reproduce this is: ---------------------------- 1. create a virtual machine with empty node1 -m 4G,slots=32,maxmem=32G \ -smp 4,maxcpus=8 \ -numa node,nodeid=0,mem=4G,cpus=0-3 \ -numa node,nodeid=1,mem=0G,cpus=4-7 2. hot-add cpu 3-7 cpu-add [3-7] 2. hot-add memory to nod1 object_add memory-backend-ram,id=ram0,size=1G device_add pc-dimm,id=dimm0,memdev=ram0,node=1 3. online memory with following order echo online_movable > memory47/state echo online > memory40/state After this, node1 will have its nr_zones equals to (ZONE_NORMAL + 1) instead of (ZONE_MOVABLE + 1). Michal said: "Having an incorrect nr_zones might result in all sorts of problems which would be quite hard to debug (e.g. reclaim not considering the movable zone). I do not expect many users would suffer from this it but still this is trivial and obviously right thing to do so backporting to the stable tree shouldn't be harmful (last famous words)" Link: http://lkml.kernel.org/r/20181117022022.9956-1-richard.weiyang@gmail.com Fixes: f1dd2cd13c4b ("mm, memory_hotplug: do not associate hotadded memory to zones until online") Signed-off-by: Wei Yang <richard.weiyang@gmail.com> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Dave Hansen <dave.hansen@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-30mm: use swp_offset as key in shmem_replace_page()Yu Zhao1-2/+4
We changed the key of swap cache tree from swp_entry_t.val to swp_offset. We need to do so in shmem_replace_page() as well. Hugh said: "shmem_replace_page() has been wrong since the day I wrote it: good enough to work on swap "type" 0, which is all most people ever use (especially those few who need shmem_replace_page() at all), but broken once there are any non-0 swp_type bits set in the higher order bits" Link: http://lkml.kernel.org/r/20181121215442.138545-1-yuzhao@google.com Fixes: f6ab1f7f6b2d ("mm, swap: use offset of swap entry as key of swap cache") Signed-off-by: Yu Zhao <yuzhao@google.com> Reviewed-by: Matthew Wilcox <willy@infradead.org> Acked-by: Hugh Dickins <hughd@google.com> Cc: <stable@vger.kernel.org> [4.9+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-30mm: cleancache: fix corruption on missed inode invalidationPavel Tikhomirov1-2/+6
If all pages are deleted from the mapping by memory reclaim and also moved to the cleancache: __delete_from_page_cache (no shadow case) unaccount_page_cache_page cleancache_put_page page_cache_delete mapping->nrpages -= nr (nrpages becomes 0) We don't clean the cleancache for an inode after final file truncation (removal). truncate_inode_pages_final check (nrpages || nrexceptional) is false no truncate_inode_pages no cleancache_invalidate_inode(mapping) These way when reading the new file created with same inode we may get these trash leftover pages from cleancache and see wrong data instead of the contents of the new file. Fix it by always doing truncate_inode_pages which is already ready for nrpages == 0 && nrexceptional == 0 case and just invalidates inode. [akpm@linux-foundation.org: add comment, per Jan] Link: http://lkml.kernel.org/r/20181112095734.17979-1-ptikhomirov@virtuozzo.com Fixes: commit 91b0abe36a7b ("mm + fs: store shadow entries in page cache") Signed-off-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com> Reviewed-by: Vasily Averin <vvs@virtuozzo.com> Reviewed-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Matthew Wilcox <willy@infradead.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-30ocfs2: fix deadlock caused by ocfs2_defrag_extent()Larry Chen1-21/+26
ocfs2_defrag_extent may fall into deadlock. ocfs2_ioctl_move_extents ocfs2_ioctl_move_extents ocfs2_move_extents ocfs2_defrag_extent ocfs2_lock_allocators_move_extents ocfs2_reserve_clusters inode_lock GLOBAL_BITMAP_SYSTEM_INODE __ocfs2_flush_truncate_log inode_lock GLOBAL_BITMAP_SYSTEM_INODE As backtrace shows above, ocfs2_reserve_clusters() will call inode_lock against the global bitmap if local allocator has not sufficient cluters. Once global bitmap could meet the demand, ocfs2_reserve_cluster will return success with global bitmap locked. After ocfs2_reserve_cluster(), if truncate log is full, __ocfs2_flush_truncate_log() will definitely fall into deadlock because it needs to inode_lock global bitmap, which has already been locked. To fix this bug, we could remove from ocfs2_lock_allocators_move_extents() the code which intends to lock global allocator, and put the removed code after __ocfs2_flush_truncate_log(). ocfs2_lock_allocators_move_extents() is referred by 2 places, one is here, the other does not need the data allocator context, which means this patch does not affect the caller so far. Link: http://lkml.kernel.org/r/20181101071422.14470-1-lchen@suse.com Signed-off-by: Larry Chen <lchen@suse.com> Reviewed-by: Changwei Ge <ge.changwei@h3c.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <jiangqi903@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-30mm/gup: finish consolidating error handlingJohn Hubbard1-2/+1
Commit df06b37ffe5a ("mm/gup: cache dev_pagemap while pinning pages") attempted to operate on each page that get_user_pages had retrieved. In order to do that, it created a common exit point from the routine. However, one case was missed, which this patch fixes up. Also, there was still an unnecessary shadow declaration (with a different type) of the "ret" variable, which this patch removes. Keith's description of the situation is: This also fixes a potentially leaked dev_pagemap reference count if a failure occurs when an iteration crosses a vma boundary. I don't think it's normal to have different vma's on a users mapped zone device memory, but good to fix anyway. I actually thought that this code: /* first iteration or cross vma bound */ if (!vma || start >= vma->vm_end) { vma = find_extend_vma(mm, start); if (!vma && in_gate_area(mm, start)) { ret = get_gate_page(mm, start & PAGE_MASK, gup_flags, &vma, pages ? &pages[i] : NULL); if (ret) goto out; dealt with the "you're trying to pin the gate page, as part of this call", rather than the generic case of crossing a vma boundary. (I think there's a fine point that I must be overlooking.) But it's still a valid case, either way. Link: http://lkml.kernel.org/r/20181121081402.29641-2-jhubbard@nvidia.com Fixes: df06b37ffe5a4 ("mm/gup: cache dev_pagemap while pinning pages") Signed-off-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Keith Busch <keith.busch@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-30MAINTAINERS: name change for LuisLuis Chamberlain1-6/+6
My name has changed, works better than Global Entry I tell ya. Link: http://lkml.kernel.org/r/20181122003138.7752-1-mcgrof@kernel.org Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-30unifdef: use memcpy instead of strncpyLinus Torvalds1-2/+2
New versions of gcc reasonably warn about the odd pattern of strncpy(p, q, strlen(q)); which really doesn't make sense: the strncpy() ends up being just a slow and odd way to write memcpy() in this case. There was a comment about _why_ the code used strncpy - to avoid the terminating NUL byte, but memcpy does the same and avoids the warning. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-30Merge tag 'char-misc-4.20-rc5' of ↵Linus Torvalds8-25/+67
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc fixes from Greg KH: "Here are a few small char/misc driver fixes for 4.20-rc5 that resolve a number of reported issues. The "largest" here is the thunderbolt patch, which resolves an issue with NVM upgrade, the smallest being some fsi driver fixes. There's also a hyperv bugfix, and the usual binder bugfixes. All of these have been in linux-next with no reported issues" * tag 'char-misc-4.20-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: misc: mic/scif: fix copy-paste error in scif_create_remote_lookup thunderbolt: Prevent root port runtime suspend during NVM upgrade Drivers: hv: vmbus: check the creation_status in vmbus_establish_gpadl() binder: fix race that allows malicious free of live buffer fsi: fsi-scom.c: Remove duplicate header fsi: master-ast-cf: select GENERIC_ALLOCATOR
2018-11-30Merge tag 'driver-core-4.20-rc5' of ↵Linus Torvalds1-2/+8
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fix from Greg KH: "Here is a single driver core fix for 4.20-rc5 It resolves an issue with the data alignment in 'struct devres' for the ARC platform. The full details are in the commit changelog, but the short summary is the change is a single line: - unsigned long long data[]; /* guarantee ull alignment */ + u8 __aligned(ARCH_KMALLOC_MINALIGN) data[]; This has been in linux-next for a while with no reported issues" * tag 'driver-core-4.20-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: devres: Align data[] to ARCH_KMALLOC_MINALIGN
2018-11-30Merge tag 'staging-4.20-rc5' of ↵Linus Torvalds24-72/+103
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging and IIO driver fixes from Greg KH: "Here are some small IIO and staging driver fixes for 4.20-rc5. Nothing major, the IIO fix ended up touching the HID drivers at the same time, but the HID maintainer acked it. The staging fixes are all minor patches for reported issues and regressions, full details are in the shortlog. All of these have been in linux-next for a while with no reported issues" * tag 'staging-4.20-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: iio/hid-sensors: Fix IIO_CHAN_INFO_RAW returning wrong values for signed numbers staging: vchiq_arm: fix compat VCHIQ_IOC_AWAIT_COMPLETION staging: mt7621-pinctrl: fix uninitialized variable ngroups staging: rtl8723bs: Add missing return for cfg80211_rtw_get_station staging: most: use format specifier "%s" in snprintf staging: rtl8723bs: Fix incorrect sense of ether_addr_equal staging: mt7621-dma: fix potentially dereferencing uninitialized 'tx_desc' staging: comedi: clarify/unify macros for NI macro-defined terminals drivers: staging: cedrus: find ctx before dereferencing it ctx staging: rtl8723bs: Fix the return value in case of error in 'rtw_wx_read32()' staging: comedi: ni_mio_common: scale ao INSN_CONFIG_GET_CMD_TIMING_CONSTRAINTS iio:st_magn: Fix enable device after trigger
2018-11-30Merge tag 'usb-4.20-rc5' of ↵Linus Torvalds8-85/+86
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY driver fixes from Greg KH: "Here are some small USB and PHY driver fixes for 4.20-rc5 Nothing big at all, just the usual handful of USB fixes for reported issues, along with some gadget and PHY driver bug fixes. All of these have been in linux-next with no reported issues. Note, the USB gadget fixes were in linux-next on its own branch, not in mine, it just got merged into here yesterday and missed linux-next of today" * tag 'usb-4.20-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: gadget: u_ether: fix unsafe list iteration USB: omap_udc: fix rejection of out transfers when DMA is used USB: omap_udc: fix USB gadget functionality on Palm Tungsten E USB: omap_udc: fix omap_udc_start() on 15xx machines USB: omap_udc: fix crashes on probe error and module removal USB: omap_udc: use devm_request_irq() usb: core: quirks: add RESET_RESUME quirk for Cherry G230 Stream series USB: usb-storage: Add new IDs to ums-realtek Revert "usb: dwc3: gadget: skip Set/Clear Halt when invalid" phy: qcom-qusb2: Fix HSTX_TRIM tuning with fused value for SDM845 phy: qcom-qusb2: Use HSTX_TRIM fused value as is dt-bindings: phy-qcom-qmp: Fix several mistakes from prior commits phy: uniphier-pcie: Depend on HAS_IOMEM
2018-11-30Merge tag 'mtd/fixes-for-4.20-rc5' of git://git.infradead.org/linux-mtdLinus Torvalds2-3/+31
Pull mtd fixes from Boris Brezillon: "NAND fix: - Fix BBT cache allocation done in nanddev_bbt_init() SPI NOR fixes: - Fix the erase type selection logic" * tag 'mtd/fixes-for-4.20-rc5' of git://git.infradead.org/linux-mtd: mtd: nand: Fix memory allocation in nanddev_bbt_init() mtd: spi-nor: fix erase_type array to indicate current map conf
2018-11-30test_hexdump: use memcpy instead of strncpyLinus Torvalds1-1/+1
New versions of gcc reasonably warn about the odd pattern of strncpy(p, q, strlen(q)); which really doesn't make sense: the strncpy() ends up being just a slow and odd way to write memcpy() in this case. Apparently there was a patch for this floating around earlier, but it got lost. Acked-again-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-11-30Merge tag 'imx-fixes-4.20-2' of ↵Olof Johansson1-6/+0
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes i.MX fixes for 4.20, round 2: - Reomve non-existing EEPROM device from imx51-zii-rdu1 board. It was added by mistake. * tag 'imx-fixes-4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx51-zii-rdu1: Remove EEPROM node Signed-off-by: Olof Johansson <olof@lixom.net>
2018-11-30MAINTAINERS: Remove unused Qualcomm SoC mailing listAndy Gross1-1/+0
This patch removes the linux-soc mailing list from the Qualcomm SoC entry. We use the linux-msm and there is no need to have the second one and this clears the list for use by others. Signed-off-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2018-11-30Merge tag 'omap-for-v4.20/fixes-rc4' of ↵Olof Johansson6-5/+8
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Few minor fixes for omaps for v4.20-rc cycle This set of fixes contains minor regression fixes for LogicPD dts files for MMC pinctrl and interrupts. There is also one section annotation fix that shows up with Clang, and a fix for an unitialized field for omap1. * tag 'omap-for-v4.20/fixes-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP1: ams-delta: Fix possible use of uninitialized field ARM: dts: am3517-som: Fix WL127x Wifi interrupt ARM: dts: logicpd-somlv: Fix interrupt on mmc3_dat1 ARM: dts: LogicPD Torpedo: Fix mmc3_dat1 interrupt ARM: dts: am3517: Fix pinmuxing for CD on MMC1 ARM: OMAP2+: prm44xx: Fix section annotation on omap44xx_prm_enable_io_wakeup Signed-off-by: Olof Johansson <olof@lixom.net>
2018-11-30Merge tag 'davinci-fixes-for-v4.20' of ↵Olof Johansson9-3/+152
git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into fixes DaVinci: fix GPIO breakage after v4.19 This set of changes is needed to fix the broken GPIO support for DaVinci boards in legacy mode after certain changes made to the GPIO driver in 4.19, namely: commits 587f7a694f01 ("gpio: davinci: Use dev name for label and automatic base selection") and eb3744a2dd01 ("gpio: davinci: Do not assume continuous IRQ numbering"). * tag 'davinci-fixes-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci: ARM: davinci: dm644x: set the GPIO base to 0 ARM: davinci: da830: set the GPIO base to 0 ARM: davinci: dm355: set the GPIO base to 0 ARM: davinci: dm646x: set the GPIO base to 0 ARM: davinci: dm365: set the GPIO base to 0 ARM: davinci: da850: set the GPIO base to 0 gpio: davinci: restore a way to manually specify the GPIO base ARM: davinci: dm644x: define gpio interrupts as separate resources ARM: davinci: dm355: define gpio interrupts as separate resources ARM: davinci: dm646x: define gpio interrupts as separate resources ARM: davinci: dm365: define gpio interrupts as separate resources ARM: davinci: da8xx: define gpio interrupts as separate resources Signed-off-by: Olof Johansson <olof@lixom.net>
2018-11-30Merge tag 'v4.20-rockchip-dts64fixes-1' of ↵Olof Johansson2-13/+1
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into fixes Removal of vdd_log regulator on rk960 to fix a stability issue and fixup of the pcie reset polarity on puma-haikou. * tag 'v4.20-rockchip-dts64fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: Fix PCIe reset polarity for rk3399-puma-haikou. arm64: dts: rockchip: remove vdd_log from rock960 to fix a stability issues Signed-off-by: Olof Johansson <olof@lixom.net>
2018-11-30Merge tag 'v4.20-rockchip-dts32fixes-1' of ↵Olof Johansson1-1/+5
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into fixes Moving the veyron memory node from memory@0 back to memory, as the firmware on these devices as issues identifying the formally correct node. * tag 'v4.20-rockchip-dts32fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: Remove @0 from the veyron memory node Signed-off-by: Olof Johansson <olof@lixom.net>
2018-11-30Merge tag 'at91-4.20-fixes' of ↵Olof Johansson1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into fixes AT91 fixes for 4.20 - Fix the SMC parent clock * tag 'at91-4.20-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: at91: sama5d2: use the divided clock for SMC Signed-off-by: Olof Johansson <olof@lixom.net>
2018-11-30Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds12-82/+16
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Misc fixes: - MCE related boot crash fix on certain AMD systems - FPU exception handling fix - FPU handling race fix - revert+rewrite of the RSDP boot protocol extension, use boot_params instead - documentation fix" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/MCE/AMD: Fix the thresholding machinery initialization order x86/fpu: Use the correct exception table macro in the XSTATE_OP wrapper x86/fpu: Disable bottom halves while loading FPU registers x86/acpi, x86/boot: Take RSDP address from boot params if available x86/boot: Mostly revert commit ae7e1238e68f2a ("Add ACPI RSDP address to setup_header") x86/ptrace: Fix documentation for tracehook_report_syscall_entry()
2018-11-30Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds21-47/+166
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Misc fixes: - counter freezing related regression fix - uprobes race fix - Intel PMU unusual event combination fix - .. and diverse tooling fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: uprobes: Fix handle_swbp() vs. unregister() + register() race once more perf/x86/intel: Disallow precise_ip on BTS events perf/x86/intel: Add generic branch tracing check to intel_pmu_has_bts() perf/x86/intel: Move branch tracing setup to the Intel-specific source file perf/x86/intel: Fix regression by default disabling perfmon v4 interrupt handling perf tools beauty ioctl: Support new ISO7816 commands tools uapi asm-generic: Synchronize ioctls.h tools arch x86: Update tools's copy of cpufeatures.h tools headers uapi: Synchronize i915_drm.h perf tools: Restore proper cwd on return from mnt namespace tools build feature: Check if get_current_dir_name() is available perf tools: Fix crash on synthesizing the unit
2018-11-30Merge branch 'efi-urgent-for-linus' of ↵Linus Torvalds1-10/+26
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI fix from Ingo Molnar: "An arm64 warning fix" * 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi: Prevent GICv3 WARN() by mapping the memreserve table before first use
2018-11-30Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds1-4/+15
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool fixes from Ingo Molnar: "Two fixes for boundary conditions" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Fix segfault in .cold detection with -ffunction-sections objtool: Fix double-free in .cold detection error path
2018-11-30Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds12-125/+189
Pull vfs fixes from Al Viro: "Assorted fixes all over the place. The iov_iter one is this cycle regression (splice from UDP triggering WARN_ON()), the rest is older" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: afs: Use d_instantiate() rather than d_add() and don't d_drop() afs: Fix missing net error handling afs: Fix validation/callback interaction iov_iter: teach csum_and_copy_to_iter() to handle pipe-backed ones exportfs: do not read dentry after free exportfs: fix 'passing zero to ERR_PTR()' warning aio: fix failure to put the file pointer sysv: return 'err' instead of 0 in __sysv_write_inode
2018-11-30Merge tag 'trace-v4.20-rc4' of ↵Linus Torvalds5-6/+65
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull more tracing fixes from Steven Rostedt: "Two more fixes: - Change idx variable in DO_TRACE macro to __idx to avoid name conflicts. A kvm event had "idx" as a parameter and it confused the macro. - Fix a race where interrupts would be traced when set_graph_function was set. The previous patch set increased a race window that tricked the function graph tracer to think it should trace interrupts when it really should not have. The bug has been there before, but was seldom hit. Only the last patch series made it more common" * tag 'trace-v4.20-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing/fgraph: Fix set_graph_function from showing interrupts tracepoint: Use __idx instead of idx in DO_TRACE macro to make it unique
2018-11-30Merge tag 'trace-v4.20-rc3' of ↵Linus Torvalds17-175/+78
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: "While rewriting the function graph tracer, I discovered a design flaw that was introduced by a patch that tried to fix one bug, but by doing so created another bug. As both bugs corrupt the output (but they do not crash the kernel), I decided to fix the design such that it could have both bugs fixed. The original fix, fixed time reporting of the function graph tracer when doing a max_depth of one. This was code that can test how much the kernel interferes with userspace. But in doing so, it could corrupt the time keeping of the function profiler. The issue is that the curr_ret_stack variable was being used for two different meanings. One was to keep track of the stack pointer on the ret_stack (shadow stack used by the function graph tracer), and the other use case was the graph call depth. Although, the two may be closely related, where they got updated was the issue that lead to the two different bugs that required the two use cases to be updated differently. The big issue with this fix is that it requires changing each architecture. The good news is, I was able to remove a lot of code that was duplicated within the architectures and place it into a single location. Then I could make the fix in one place. I pushed this code into linux-next to let it settle over a week, and before doing so, I cross compiled all the affected architectures to make sure that they built fine. In the mean time, I also pulled in a patch that fixes the sched_switch previous tasks state output, that was not actually correct" * tag 'trace-v4.20-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: sched, trace: Fix prev_state output in sched_switch tracepoint function_graph: Have profiler use curr_ret_stack and not depth function_graph: Reverse the order of pushing the ret_stack and the callback function_graph: Move return callback before update of curr_ret_stack function_graph: Use new curr_ret_depth to manage depth instead of curr_ret_stack function_graph: Make ftrace_push_return_trace() static sparc/function_graph: Simplify with function_graph_enter() sh/function_graph: Simplify with function_graph_enter() s390/function_graph: Simplify with function_graph_enter() riscv/function_graph: Simplify with function_graph_enter() powerpc/function_graph: Simplify with function_graph_enter() parisc: function_graph: Simplify with function_graph_enter() nds32: function_graph: Simplify with function_graph_enter() MIPS: function_graph: Simplify with function_graph_enter() microblaze: function_graph: Simplify with function_graph_enter() arm64: function_graph: Simplify with function_graph_enter() ARM: function_graph: Simplify with function_graph_enter() x86/function_graph: Simplify with function_graph_enter() function_graph: Create function_graph_enter() to consolidate architecture code
2018-11-30ACPI/IORT: Fix iort_get_platform_device_domain() uninitialized pointer valueLorenzo Pieralisi1-1/+1
Running the Clang static analyzer on IORT code detected the following error: Logic error: Branch condition evaluates to a garbage value in iort_get_platform_device_domain() If the named component associated with a given device has no IORT mappings, iort_get_platform_device_domain() exits its MSI mapping loop with msi_parent pointer containing garbage, which can lead to erroneous code path execution. Initialize the msi_parent pointer, fixing the bug. Fixes: d4f54a186667 ("ACPI: platform: setup MSI domain for ACPI based platform device") Reported-by: Patrick Bellasi <patrick.bellasi@arm.com> Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Acked-by: Will Deacon <will.deacon@arm.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2018-11-30Merge tag 'drm-fixes-2018-11-30' of git://anongit.freedesktop.org/drm/drmLinus Torvalds14-33/+110
Pull drm fixes from Dave Airlie: "This weeks instalment of fixes. Looks fairly like business as usual and everything seems to rolling along. There was one MST fix applied and reverted in the misc tree, but otherwise nothing too strange in here. core: - incorrect master setting on error fix i915: - only GVT fixes this week: * one MOCS register load * rpm lock fix * use after free rcar-du: - regression fix for group start amdgpu: - DP MST fix - GPUVM fix for huge pages - RLC fix for vega20 ast: - fix EDID reading stability - ioreg free fix meson: - sleep in irq fix - vblank fixes - array boundary fix" * tag 'drm-fixes-2018-11-30' of git://anongit.freedesktop.org/drm/drm: drm/ast: fixed reading monitor EDID not stable issue drm/ast: Fix incorrect free on ioregs Revert "drm/dp_mst: Skip validating ports during destruction, just ref" drm/amdgpu: Add delay after enable RLC ucode drm/amdgpu: Avoid endless loop in GPUVM fragment processing drm/amdgpu: Cast to uint64_t before left shift drm/meson: add support for 1080p25 mode drm/meson: Fix OOB memory accesses in meson_viu_set_osd_lut() drm/meson: Enable fast_io in meson_dw_hdmi_regmap_config drm/meson: Fixes for drm_crtc_vblank_on/off support drm: set is_master to 0 upon drm_new_set_master() failure drm/dp_mst: Skip validating ports during destruction, just ref drm: rcar-du: Fix DU3 start/stop on M3-N drm/amd/dm: Understand why attaching path/tile properties are needed drm/amd/dm: Don't forget to attach MST encoders drm/i915/gvt: Avoid use-after-free iterating the gtt list drm/i915/gvt: ensure gpu is powered before do i915_gem_gtt_insert drm/i915/gvt: not to touch undefined MOCS registers
2018-11-30Merge branch 'nvme-4.20' of git://git.infradead.org/nvme into for-linusJens Axboe4-4/+11
Pull NVMe fixes from Christoph: "Various fixlets all over." * 'nvme-4.20' of git://git.infradead.org/nvme: nvme-rdma: fix double freeing of async event data nvme: flush namespace scanning work just before removing namespaces nvme: warn when finding multi-port subsystems without multipathing enabled nvme-pci: fix surprise removal nvme-fc: initialize nvme_req(rq)->ctrl after calling __nvme_fc_init_request() nvme: Free ctrl device name on init failure
2018-11-30block: fix single range discard mergeMing Lei1-1/+1
There are actually two kinds of discard merge: - one is the normal discard merge, just like normal read/write request, and call it single-range discard - another is the multi-range discard, queue_max_discard_segments(rq->q) > 1 For the former case, queue_max_discard_segments(rq->q) is 1, and we should handle this kind of discard merge like the normal read/write request. This patch fixes the following kernel panic issue[1], which is caused by not removing the single-range discard request from elevator queue. Guangwu has one raid discard test case, in which this issue is a bit easier to trigger, and I verified that this patch can fix the kernel panic issue in Guangwu's test case. [1] kernel panic log from Jens's report BUG: unable to handle kernel NULL pointer dereference at 0000000000000148 PGD 0 P4D 0. Oops: 0000 [#1] SMP PTI CPU: 37 PID: 763 Comm: kworker/37:1H Not tainted \ 4.20.0-rc3-00649-ge64d9a554a91-dirty #14 Hardware name: Wiwynn \ Leopard-Orv2/Leopard-DDR BW, BIOS LBM08 03/03/2017 Workqueue: kblockd \ blk_mq_run_work_fn RIP: \ 0010:blk_mq_get_driver_tag+0x81/0x120 Code: 24 \ 10 48 89 7c 24 20 74 21 83 fa ff 0f 95 c0 48 8b 4c 24 28 65 48 33 0c 25 28 00 00 00 \ 0f 85 96 00 00 00 48 83 c4 30 5b 5d c3 <48> 8b 87 48 01 00 00 8b 40 04 39 43 20 72 37 \ f6 87 b0 00 00 00 02 RSP: 0018:ffffc90004aabd30 EFLAGS: 00010246 \ RAX: 0000000000000003 RBX: ffff888465ea1300 RCX: ffffc90004aabde8 RDX: 00000000ffffffff RSI: ffffc90004aabde8 RDI: 0000000000000000 RBP: 0000000000000000 R08: ffff888465ea1348 R09: 0000000000000000 R10: 0000000000001000 R11: 00000000ffffffff R12: ffff888465ea1300 R13: 0000000000000000 R14: ffff888465ea1348 R15: ffff888465d10000 FS: 0000000000000000(0000) GS:ffff88846f9c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000148 CR3: 000000000220a003 CR4: 00000000003606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: blk_mq_dispatch_rq_list+0xec/0x480 ? elv_rb_del+0x11/0x30 blk_mq_do_dispatch_sched+0x6e/0xf0 blk_mq_sched_dispatch_requests+0xfa/0x170 __blk_mq_run_hw_queue+0x5f/0xe0 process_one_work+0x154/0x350 worker_thread+0x46/0x3c0 kthread+0xf5/0x130 ? process_one_work+0x350/0x350 ? kthread_destroy_worker+0x50/0x50 ret_from_fork+0x1f/0x30 Modules linked in: sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel \ kvm switchtec irqbypass iTCO_wdt iTCO_vendor_support efivars cdc_ether usbnet mii \ cdc_acm i2c_i801 lpc_ich mfd_core ipmi_si ipmi_devintf ipmi_msghandler acpi_cpufreq \ button sch_fq_codel nfsd nfs_acl lockd grace auth_rpcgss oid_registry sunrpc nvme \ nvme_core fuse sg loop efivarfs autofs4 CR2: 0000000000000148 \ ---[ end trace 340a1fb996df1b9b ]--- RIP: 0010:blk_mq_get_driver_tag+0x81/0x120 Code: 24 10 48 89 7c 24 20 74 21 83 fa ff 0f 95 c0 48 8b 4c 24 28 65 48 33 0c 25 28 \ 00 00 00 0f 85 96 00 00 00 48 83 c4 30 5b 5d c3 <48> 8b 87 48 01 00 00 8b 40 04 39 43 \ 20 72 37 f6 87 b0 00 00 00 02 Fixes: 445251d0f4d329a ("blk-mq: fix discard merge with scheduler attached") Reported-by: Jens Axboe <axboe@kernel.dk> Cc: Guangwu Zhang <guazhang@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Jianchao Wang <jianchao.w.wang@oracle.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-30stackleak: Disable function tracing and kprobes for stackleak_erase()Alexander Popov1-1/+3
The stackleak_erase() function is called on the trampoline stack at the end of syscall. This stack is not big enough for ftrace and kprobes operations, e.g. it can be exhausted if we use kprobe_events for stackleak_erase(). So let's disable function tracing and kprobes of stackleak_erase(). Reported-by: kernel test robot <lkp@intel.com> Fixes: 10e9ae9fabaf ("gcc-plugins: Add STACKLEAK plugin for tracking the kernel stack") Signed-off-by: Alexander Popov <alex.popov@linux.com> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-11-30Merge tag 'pstore-v4.20-rc5' of ↵Linus Torvalds2-10/+10
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull pstore fix from Kees Cook: "Fix corrupted compression due to unlucky size choice with ECC" * tag 'pstore-v4.20-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: pstore/ram: Correctly calculate usable PRZ bytes
2018-11-30Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds11-123/+121
Pull rdma fixes from Jason Gunthorpe: "This is a bit later than usual for our first -rc but I'm not seeing anything worry-some in the RDMA tree right now. Quiet so far this -rc cycle, only a few internal driver related bugs and a small series fixing ODP bugs found by more advanced testing. A set of small driver and core code fixes: - Small series fixing longtime user triggerable bugs in the ODP processing inside mlx5 and core code - Various small driver malfunctions and crashes (use after, free, error unwind, implementation bugs) - A misfunction of the RDMA GID cache that can be triggered by the administrator" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/mlx5: Initialize return variable in case pagefault was skipped IB/mlx5: Fix page fault handling for MW IB/umem: Set correct address to the invalidation function IB/mlx5: Skip non-ODP MR when handling a page fault RDMA/hns: Bugfix pbl configuration for rereg mr iser: set sector for ambiguous mr status errors RDMA/rdmavt: Fix rvt_create_ah function signature IB/mlx5: Avoid load failure due to unknown link width IB/mlx5: Fix XRC QP support after introducing extended atomic RDMA/bnxt_re: Avoid accessing the device structure after it is freed RDMA/bnxt_re: Fix system hang when registration with L2 driver fails RDMA/core: Add GIDs while changing MAC addr only for registered ndev RDMA/mlx5: Fix fence type for IB_WR_LOCAL_INV WR net/mlx5: Fix XRC SRQ umem valid bits
2018-11-30nvme-rdma: fix double freeing of async event dataPrabhath Sajeepa1-0/+2
Some error paths in configuration of admin queue free data buffer associated with async request SQE without resetting the data buffer pointer to NULL, This buffer is also freed up again if the controller is shutdown or reset. Signed-off-by: Prabhath Sajeepa <psajeepa@purestorage.com> Reviewed-by: Roland Dreier <roland@purestorage.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-11-30nvme: flush namespace scanning work just before removing namespacesSagi Grimberg1-1/+3
nvme_stop_ctrl can be called also for reset flow and there is no need to flush the scan_work as namespaces are not being removed. This can cause deadlock in rdma, fc and loop drivers since nvme_stop_ctrl barriers before controller teardown (and specifically I/O cancellation of the scan_work itself) takes place, but the scan_work will be blocked anyways so there is no need to flush it. Instead, move scan_work flush to nvme_remove_namespaces() where it really needs to flush. Reported-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Keith Busch <keith.busch@intel.com> Reviewed by: James Smart <jsmart2021@gmail.com> Tested-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-11-30nvme: warn when finding multi-port subsystems without multipathing enabledChristoph Hellwig1-0/+3
Without CONFIG_NVME_MULTIPATH enabled a multi-port subsystem might show up as invididual devices and cause problems, warn about it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
2018-11-30fscache, cachefiles: remove redundant variable 'cache'Colin Ian King1-3/+0
Variable 'cache' is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'cache' set but not used [-Wunused-but-set-variable] Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David Howells <dhowells@redhat.com>
2018-11-30cachefiles: avoid deprecated get_seconds()Arnd Bergmann1-1/+1
get_seconds() returns an unsigned long can overflow on some architectures and is deprecated because of that. In cachefs, we cast that number to a a 32-bit integer, which will overflow in year 2106 on all architectures. As confirmed by David Howells, the overflow probably isn't harmful in the end, since the timestamps are only used to make the file names unique, but they don't strictly have to be in monotonically increasing order since the files only exist in order to be deleted as quickly as possible. Moving to ktime_get_real_seconds() avoids the deprecated interface. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David Howells <dhowells@redhat.com>
2018-11-30cachefiles: Explicitly cast enumerated type in put_objectNathan Chancellor1-2/+4
Clang warns when one enumerated type is implicitly converted to another. fs/cachefiles/namei.c:247:50: warning: implicit conversion from enumeration type 'enum cachefiles_obj_ref_trace' to different enumeration type 'enum fscache_obj_ref_trace' [-Wenum-conversion] cache->cache.ops->put_object(&xobject->fscache, cachefiles_obj_put_wait_retry); Silence this warning by explicitly casting to fscache_obj_ref_trace, which is also done in put_object. Reported-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: David Howells <dhowells@redhat.com>
2018-11-30fscache: fix race between enablement and dropping of objectNeilBrown1-0/+3
It was observed that a process blocked indefintely in __fscache_read_or_alloc_page(), waiting for FSCACHE_COOKIE_LOOKING_UP to be cleared via fscache_wait_for_deferred_lookup(). At this time, ->backing_objects was empty, which would normaly prevent __fscache_read_or_alloc_page() from getting to the point of waiting. This implies that ->backing_objects was cleared *after* __fscache_read_or_alloc_page was was entered. When an object is "killed" and then "dropped", FSCACHE_COOKIE_LOOKING_UP is cleared in fscache_lookup_failure(), then KILL_OBJECT and DROP_OBJECT are "called" and only in DROP_OBJECT is ->backing_objects cleared. This leaves a window where something else can set FSCACHE_COOKIE_LOOKING_UP and __fscache_read_or_alloc_page() can start waiting, before ->backing_objects is cleared There is some uncertainty in this analysis, but it seems to be fit the observations. Adding the wake in this patch will be handled correctly by __fscache_read_or_alloc_page(), as it checks if ->backing_objects is empty again, after waiting. Customer which reported the hang, also report that the hang cannot be reproduced with this fix. The backtrace for the blocked process looked like: PID: 29360 TASK: ffff881ff2ac0f80 CPU: 3 COMMAND: "zsh" #0 [ffff881ff43efbf8] schedule at ffffffff815e56f1 #1 [ffff881ff43efc58] bit_wait at ffffffff815e64ed #2 [ffff881ff43efc68] __wait_on_bit at ffffffff815e61b8 #3 [ffff881ff43efca0] out_of_line_wait_on_bit at ffffffff815e625e #4 [ffff881ff43efd08] fscache_wait_for_deferred_lookup at ffffffffa04f2e8f [fscache] #5 [ffff881ff43efd18] __fscache_read_or_alloc_page at ffffffffa04f2ffe [fscache] #6 [ffff881ff43efd58] __nfs_readpage_from_fscache at ffffffffa0679668 [nfs] #7 [ffff881ff43efd78] nfs_readpage at ffffffffa067092b [nfs] #8 [ffff881ff43efda0] generic_file_read_iter at ffffffff81187a73 #9 [ffff881ff43efe50] nfs_file_read at ffffffffa066544b [nfs] #10 [ffff881ff43efe70] __vfs_read at ffffffff811fc756 #11 [ffff881ff43efee8] vfs_read at ffffffff811fccfa #12 [ffff881ff43eff18] sys_read at ffffffff811fda62 #13 [ffff881ff43eff50] entry_SYSCALL_64_fastpath at ffffffff815e986e Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: David Howells <dhowells@redhat.com>
2018-11-30fs: fix lost error code in dio_completeMaximilian Heyne1-2/+2
commit e259221763a40403d5bb232209998e8c45804ab8 ("fs: simplify the generic_write_sync prototype") reworked callers of generic_write_sync(), and ended up dropping the error return for the directio path. Prior to that commit, in dio_complete(), an error would be bubbled up the stack, but after that commit, errors passed on to dio_complete were eaten up. This was reported on the list earlier, and a fix was proposed in https://lore.kernel.org/lkml/20160921141539.GA17898@infradead.org/, but never followed up with. We recently hit this bug in our testing where fencing io errors, which were previously erroring out with EIO, were being returned as success operations after this commit. The fix proposed on the list earlier was a little short -- it would have still called generic_write_sync() in case `ret` already contained an error. This fix ensures generic_write_sync() is only called when there's no pending error in the write. Additionally, transferred is replaced with ret to bring this code in line with other callers. Fixes: e259221763a4 ("fs: simplify the generic_write_sync prototype") Reported-by: Ravi Nankani <rnankani@amazon.com> Signed-off-by: Maximilian Heyne <mheyne@amazon.de> Reviewed-by: Christoph Hellwig <hch@lst.de> CC: Torsten Mehlan <tomeh@amazon.de> CC: Uwe Dannowski <uwed@amazon.de> CC: Amit Shah <aams@amazon.de> CC: David Woodhouse <dwmw@amazon.co.uk> CC: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-29tracing/fgraph: Fix set_graph_function from showing interruptsSteven Rostedt (VMware)4-3/+62
The tracefs file set_graph_function is used to only function graph functions that are listed in that file (or all functions if the file is empty). The way this is implemented is that the function graph tracer looks at every function, and if the current depth is zero and the function matches something in the file then it will trace that function. When other functions are called, the depth will be greater than zero (because the original function will be at depth zero), and all functions will be traced where the depth is greater than zero. The issue is that when a function is first entered, and the handler that checks this logic is called, the depth is set to zero. If an interrupt comes in and a function in the interrupt handler is traced, its depth will be greater than zero and it will automatically be traced, even if the original function was not. But because the logic only looks at depth it may trace interrupts when it should not be. The recent design change of the function graph tracer to fix other bugs caused the depth to be zero while the function graph callback handler is being called for a longer time, widening the race of this happening. This bug was actually there for a longer time, but because the race window was so small it seldom happened. The Fixes tag below is for the commit that widen the race window, because that commit belongs to a series that will also help fix the original bug. Cc: stable@kernel.org Fixes: 39eb456dacb5 ("function_graph: Use new curr_ret_depth to manage depth instead of curr_ret_stack") Reported-by: Joe Lawrence <joe.lawrence@redhat.com> Tested-by: Joe Lawrence <joe.lawrence@redhat.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-11-29tracepoint: Use __idx instead of idx in DO_TRACE macro to make it uniqueZenghui Yu1-3/+3
After enabling KVM event tracing, almost all of trace_kvm_exit()'s printk shows "kvm_exit: IRQ: ..." even if the actual exception_type is NOT IRQ. More specifically, trace_kvm_exit() is defined in virt/kvm/arm/trace.h by TRACE_EVENT. This slight problem may have existed after commit e6753f23d961 ("tracepoint: Make rcuidle tracepoint callers use SRCU"). There are two variables in trace_kvm_exit() and __DO_TRACE() which have the same name, *idx*. Thus the actual value of *idx* will be overwritten when tracing. Fix it by adding a simple prefix. Cc: Joel Fernandes <joel@joelfernandes.org> Cc: Wang Haibin <wanghaibin.wang@huawei.com> Cc: linux-trace-devel@vger.kernel.org Cc: stable@vger.kernel.org Fixes: e6753f23d961 ("tracepoint: Make rcuidle tracepoint callers use SRCU") Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org> Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-11-29afs: Use d_instantiate() rather than d_add() and don't d_drop()David Howells1-3/+1
Use d_instantiate() rather than d_add() and don't d_drop() in afs_vnode_new_inode(). The dentry shouldn't be removed as it's not changing its name. Reported-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-11-29afs: Fix missing net error handlingDavid Howells6-113/+135
kAFS can be given certain network errors (EADDRNOTAVAIL, EHOSTDOWN and ERFKILL) that it doesn't handle in its server/address rotation algorithms. They cause the probing and rotation to abort immediately rather than rotating. Fix this by: (1) Abstracting out the error prioritisation from the VL and FS rotation algorithms into a common function and expand usage into the server probing code. When multiple errors are available, this code selects the one we'd prefer to return. (2) Add handling for EADDRNOTAVAIL, EHOSTDOWN and ERFKILL. Fixes: 0fafdc9f888b ("afs: Fix file locking") Fixes: 0338747d8454 ("afs: Probe multiple fileservers simultaneously") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2018-11-29afs: Fix validation/callback interactionDavid Howells1-6/+12
When afs_validate() is called to validate a vnode (inode), there are two unhandled cases in the fastpath at the top of the function: (1) If the vnode is promised (AFS_VNODE_CB_PROMISED is set), the break counters match and the data has expired, then there's an implicit case in which the vnode needs revalidating. This has no consequences since the default "valid = false" set at the top of the function happens to do the right thing. (2) If the vnode is not promised and it hasn't been deleted (AFS_VNODE_DELETED is not set) then there's a default case we're not handling in which the vnode is invalid. If the vnode is invalid, we need to bring cb_s_break and cb_v_break up to date before we refetch the status. As a consequence, once the server loses track of the client (ie. sufficient time has passed since we last sent it an operation), it will send us a CB.InitCallBackState* operation when we next try to talk to it. This calls afs_init_callback_state() which increments afs_server::cb_s_break, but this then doesn't propagate to the afs_vnode record. The result being that every afs_validate() call thereafter sends a status fetch operation to the server. Clarify and fix this by: (A) Setting valid in all the branches rather than initialising it at the top so that the compiler catches where we've missed. (B) Restructuring the logic in the 'promised' branch so that we set valid to false if the callback is due to expire (or has expired) and so that the final case is that the vnode is still valid. (C) Adding an else-statement that ups cb_s_break and cb_v_break if the promised and deleted cases don't match. Fixes: c435ee34551e ("afs: Overhaul the callback handling") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-03 20:32:03 +0000