| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
CHECKSUM_COMPLETE signals that skb->csum stores the sum over the
entire packet. It does not imply that an embedded l4 checksum
field has been validated.
Fixes: 682f048bd494 ("af_packet: pass checksum validation status to the user")
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20221128161812.640098-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The cited commit adds a for loop to check if each port supports lag
or not. But dev is not initialized correctly. Fix it by initializing
dev for each iteration.
Fixes: e87c6a832f88 ("net/mlx5: E-switch, Fix duplicate lag creation")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reported-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20221129093006.378840-2-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This reverts commit c0071be0e16c461680d87b763ba1ee5e46548fde.
The cited commit removed the validity checks which initialized the
window_sz and never removed the use of the now uninitialized variable,
so now we are left with wrong value in the window size and the following
clang warning: [-Wuninitialized]
drivers/net/ethernet/mellanox/mlx5/core/en_accel/macsec.c:232:45:
warning: variable 'window_sz' is uninitialized when used here
MLX5_SET(macsec_aso, aso_ctx, window_size, window_sz);
Revet at this time to address the clang issue due to lack of time to
test the proper solution.
Fixes: c0071be0e16c ("net/mlx5e: MACsec, remove replay window size limitation in offload path")
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reported-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20221129093006.378840-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
rhashtable_lookup_fast() returns NULL when failed instead of error
pointer.
Fixes: 396b80cb5cc8 ("net: marvell: prestera: Add neighbour cache accounting")
Fixes: 0a23ae237171 ("net: marvell: prestera: Add router nexthops ABI")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Link: https://lore.kernel.org/r/20221125012751.23249-1-shangxiaojing@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
syzbot reported use-after-free in tun_detach() [1]. This causes call
trace like below:
==================================================================
BUG: KASAN: use-after-free in notifier_call_chain+0x1ee/0x200 kernel/notifier.c:75
Read of size 8 at addr ffff88807324e2a8 by task syz-executor.0/3673
CPU: 0 PID: 3673 Comm: syz-executor.0 Not tainted 6.1.0-rc5-syzkaller-00044-gcc675d22e422 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xd1/0x138 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:284 [inline]
print_report+0x15e/0x461 mm/kasan/report.c:395
kasan_report+0xbf/0x1f0 mm/kasan/report.c:495
notifier_call_chain+0x1ee/0x200 kernel/notifier.c:75
call_netdevice_notifiers_info+0x86/0x130 net/core/dev.c:1942
call_netdevice_notifiers_extack net/core/dev.c:1983 [inline]
call_netdevice_notifiers net/core/dev.c:1997 [inline]
netdev_wait_allrefs_any net/core/dev.c:10237 [inline]
netdev_run_todo+0xbc6/0x1100 net/core/dev.c:10351
tun_detach drivers/net/tun.c:704 [inline]
tun_chr_close+0xe4/0x190 drivers/net/tun.c:3467
__fput+0x27c/0xa90 fs/file_table.c:320
task_work_run+0x16f/0x270 kernel/task_work.c:179
exit_task_work include/linux/task_work.h:38 [inline]
do_exit+0xb3d/0x2a30 kernel/exit.c:820
do_group_exit+0xd4/0x2a0 kernel/exit.c:950
get_signal+0x21b1/0x2440 kernel/signal.c:2858
arch_do_signal_or_restart+0x86/0x2300 arch/x86/kernel/signal.c:869
exit_to_user_mode_loop kernel/entry/common.c:168 [inline]
exit_to_user_mode_prepare+0x15f/0x250 kernel/entry/common.c:203
__syscall_exit_to_user_mode_work kernel/entry/common.c:285 [inline]
syscall_exit_to_user_mode+0x1d/0x50 kernel/entry/common.c:296
do_syscall_64+0x46/0xb0 arch/x86/entry/common.c:86
entry_SYSCALL_64_after_hwframe+0x63/0xcd
The cause of the issue is that sock_put() from __tun_detach() drops
last reference count for struct net, and then notifier_call_chain()
from netdev_state_change() accesses that struct net.
This patch fixes the issue by calling sock_put() from tun_detach()
after all necessary accesses for the struct net has done.
Fixes: 83c1f36f9880 ("tun: send netlink notification when the device is modified")
Reported-by: syzbot+106f9b687cd64ee70cd1@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=96eb7f1ce75ef933697f24eeab928c4a716edefe [1]
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Link: https://lore.kernel.org/r/20221124175134.1589053-1-syoshida@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
I got the following report while doing device(mscc-miim) load test
with CONFIG_OF_UNITTEST and CONFIG_OF_DYNAMIC enabled:
OF: ERROR: memory leak, expected refcount 1 instead of 2,
of_node_get()/of_node_put() unbalanced - destroy cset entry:
attach overlay node /spi/soc@0/mdio@7107009c/ethernet-phy@0
If the 'fwnode' is not an acpi node, the refcount is get in
fwnode_mdiobus_phy_device_register(), but it has never been
put when the device is freed in the normal path. So call
fwnode_handle_put() in phy_device_release() to avoid leak.
If it's an acpi node, it has never been get, but it's put
in the error path, so call fwnode_handle_get() before
phy_device_register() to keep get/put operation balanced.
Fixes: bc1bee3b87ee ("net: mdiobus: Introduce fwnode_mdiobus_register_phy()")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20221124150130.609420-1-yangyingliang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The skb is delivered to netif_rx() which may free it, after calling this,
dereferencing skb may trigger use-after-free.
Fixes: f421436a591d ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20221125075724.27912-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As the call trace shows, the original skb was freed in tipc_msg_validate(),
and dereferencing the old skb cb would cause an use-after-free crash.
BUG: KASAN: use-after-free in tipc_crypto_rcv_complete+0x1835/0x2240 [tipc]
Call Trace:
<IRQ>
tipc_crypto_rcv_complete+0x1835/0x2240 [tipc]
tipc_crypto_rcv+0xd32/0x1ec0 [tipc]
tipc_rcv+0x744/0x1150 [tipc]
...
Allocated by task 47078:
kmem_cache_alloc_node+0x158/0x4d0
__alloc_skb+0x1c1/0x270
tipc_buf_acquire+0x1e/0xe0 [tipc]
tipc_msg_create+0x33/0x1c0 [tipc]
tipc_link_build_proto_msg+0x38a/0x2100 [tipc]
tipc_link_timeout+0x8b8/0xef0 [tipc]
tipc_node_timeout+0x2a1/0x960 [tipc]
call_timer_fn+0x2d/0x1c0
...
Freed by task 47078:
tipc_msg_validate+0x7b/0x440 [tipc]
tipc_crypto_rcv_complete+0x4b5/0x2240 [tipc]
tipc_crypto_rcv+0xd32/0x1ec0 [tipc]
tipc_rcv+0x744/0x1150 [tipc]
This patch fixes it by re-fetching the skb cb from the new allocated skb
after calling tipc_msg_validate().
Fixes: fc1b6d6de220 ("tipc: introduce TIPC encryption & authentication")
Reported-by: Shuang Li <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://lore.kernel.org/r/1b1cdba762915325bd8ef9a98d0276eb673df2a5.1669398403.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Matthieu Baerts says:
====================
mptcp: More fixes for 6.1
Patch 1 makes sure data received after a close will still be processed
and acked as exepected. This is a regression for a commit introduced
in v5.11.
Patch 2 fixes a kernel deadlock found when working on validating TFO
with a listener MPTCP socket. This is not directly linked to TFO but
it is easier to reproduce the issue with it. This fixes a bug introduced
by a commit from v6.0.
====================
Link: https://lore.kernel.org/r/20221128154239.1999234-1-matthieu.baerts@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Matt reported a splat at msk close time:
BUG: sleeping function called from invalid context at net/mptcp/protocol.c:2877
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 155, name: packetdrill
preempt_count: 201, expected: 0
RCU nest depth: 0, expected: 0
4 locks held by packetdrill/155:
#0: ffff888001536990 (&sb->s_type->i_mutex_key#6){+.+.}-{3:3}, at: __sock_release (net/socket.c:650)
#1: ffff88800b498130 (sk_lock-AF_INET){+.+.}-{0:0}, at: mptcp_close (net/mptcp/protocol.c:2973)
#2: ffff88800b49a130 (sk_lock-AF_INET/1){+.+.}-{0:0}, at: __mptcp_close_ssk (net/mptcp/protocol.c:2363)
#3: ffff88800b49a0b0 (slock-AF_INET){+...}-{2:2}, at: __lock_sock_fast (include/net/sock.h:1820)
Preemption disabled at:
0x0
CPU: 1 PID: 155 Comm: packetdrill Not tainted 6.1.0-rc5 #365
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:107 (discriminator 4))
__might_resched.cold (kernel/sched/core.c:9891)
__mptcp_destroy_sock (include/linux/kernel.h:110)
__mptcp_close (net/mptcp/protocol.c:2959)
mptcp_subflow_queue_clean (include/net/sock.h:1777)
__mptcp_close_ssk (net/mptcp/protocol.c:2363)
mptcp_destroy_common (net/mptcp/protocol.c:3170)
mptcp_destroy (include/net/sock.h:1495)
__mptcp_destroy_sock (net/mptcp/protocol.c:2886)
__mptcp_close (net/mptcp/protocol.c:2959)
mptcp_close (net/mptcp/protocol.c:2974)
inet_release (net/ipv4/af_inet.c:432)
__sock_release (net/socket.c:651)
sock_close (net/socket.c:1367)
__fput (fs/file_table.c:320)
task_work_run (kernel/task_work.c:181 (discriminator 1))
exit_to_user_mode_prepare (include/linux/resume_user_mode.h:49)
syscall_exit_to_user_mode (kernel/entry/common.c:130)
do_syscall_64 (arch/x86/entry/common.c:87)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
We can't call mptcp_close under the 'fast' socket lock variant, replace
it with a sock_lock_nested() as the relevant code is already under the
listening msk socket lock protection.
Reported-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/316
Fixes: 30e51b923e43 ("mptcp: fix unreleased socket in accept queue")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
All of the subflows of a msk will be orphaned in mptcp_close(), which
means the subflows are in DEAD state. After then, DATA_FIN will be sent,
and the other side will response with a DATA_ACK for this DATA_FIN.
However, if the other side still has pending data, the data that received
on these subflows will not be passed to the msk, as they are DEAD and
subflow_data_ready() will not be called in tcp_data_ready(). Therefore,
these data can't be acked, and they will be retransmitted again and again,
until timeout.
Fix this by setting ssk->sk_socket and ssk->sk_wq to 'NULL', instead of
orphaning the subflows in __mptcp_close(), as Paolo suggested.
Fixes: e16163b6e2b7 ("mptcp: refactor shutdown and close")
Reviewed-by: Biao Jiang <benbjiang@tencent.com>
Reviewed-by: Mengen Sun <mengensun@tencent.com>
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Reviewed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch changes the reported ethtool statistics for the lan9303
family of parts covered by this driver.
The TxUnderRun statistic label is renamed to RxShort to accurately
reflect what stat the device is reporting. I did not reorder the
statistics as that might cause problems with existing user code that
are expecting the stats at a certain offset.
Fixes: a1292595e006 ("net: dsa: add new DSA switch driver for the SMSC-LAN9303")
Signed-off-by: Jerry Ray <jerry.ray@microchip.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20221128193559.6572-1-jerry.ray@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v6.1
Third, and hopefully final, set of fixes for v6.1. We are marking the
rsi driver as orphan, have some Information Element parsing fixes to
wilc1000 driver and three small fixes to the stack.
* tag 'wireless-2022-11-28' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac8021: fix possible oob access in ieee80211_get_rate_duration
wifi: cfg80211: don't allow multi-BSSID in S1G
wifi: cfg80211: fix buffer overflow in elem comparison
wifi: wilc1000: validate number of channels
wifi: wilc1000: validate length of IEEE80211_P2P_ATTR_CHANNEL_LIST attribute
wifi: wilc1000: validate length of IEEE80211_P2P_ATTR_OPER_CHANNEL attribute
wifi: wilc1000: validate pairwise and authentication suite offsets
MAINTAINERS: mark rsi wifi driver as orphan
====================
Link: https://lore.kernel.org/r/20221128113513.6F459C433C1@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
bpf 2022-11-25
We've added 10 non-merge commits during the last 8 day(s) which contain
a total of 7 files changed, 48 insertions(+), 30 deletions(-).
The main changes are:
1) Several libbpf ringbuf fixes related to probing for its availability,
size overflows when mmaping a 2G ringbuf and rejection of invalid
reservationsizes, from Hou Tao.
2) Fix a buggy return pointer in libbpf for attach_raw_tp function,
from Jiri Olsa.
3) Fix a local storage BPF map bug where the value's spin lock field
can get initialized incorrectly, from Xu Kuohai.
4) Two follow-up fixes in kprobe_multi BPF selftests for BPF CI,
from Jiri Olsa.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Make test_bench_attach serial
selftests/bpf: Filter out default_idle from kprobe_multi bench
bpf: Set and check spin lock value in sk_storage_map_test
bpf: Do not copy spin lock field from user in bpf_selem_alloc
libbpf: Check the validity of size in user_ring_buffer__reserve()
libbpf: Handle size overflow for user ringbuf mmap
libbpf: Handle size overflow for ringbuf mmap
libbpf: Use page size as max_entries when probing ring buffer map
bpf, perf: Use subprog name when reporting subprog ksymbol
libbpf: Use correct return pointer in attach_raw_tp
====================
Link: https://lore.kernel.org/r/20221125001034.29473-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the kernel receives a route deletion request from user space it
tries to delete a route that matches the route attributes specified in
the request.
If only prefix information is specified in the request, the kernel
should delete the first matching FIB alias regardless of its associated
FIB info. However, an error is currently returned when the FIB info is
backed by a nexthop object:
# ip nexthop add id 1 via 192.0.2.2 dev dummy10
# ip route add 198.51.100.0/24 nhid 1
# ip route del 198.51.100.0/24
RTNETLINK answers: No such process
Fix by matching on such a FIB info when legacy nexthop attributes are
not specified in the request. An earlier check already covers the case
where a nexthop ID is specified in the request.
Add tests that cover these flows. Before the fix:
# ./fib_nexthops.sh -t ipv4_fcnal
...
TEST: Delete route when not specifying nexthop attributes [FAIL]
Tests passed: 11
Tests failed: 1
After the fix:
# ./fib_nexthops.sh -t ipv4_fcnal
...
TEST: Delete route when not specifying nexthop attributes [ OK ]
Tests passed: 12
Tests failed: 0
No regressions in other tests:
# ./fib_nexthops.sh
...
Tests passed: 228
Tests failed: 0
# ./fib_tests.sh
...
Tests passed: 186
Tests failed: 0
Cc: stable@vger.kernel.org
Reported-by: Jonas Gorski <jonas.gorski@gmail.com>
Tested-by: Jonas Gorski <jonas.gorski@gmail.com>
Fixes: 493ced1ac47c ("ipv4: Allow routes to use nexthop objects")
Fixes: 6bf92d70e690 ("net: ipv4: fix route with nexthop object delete warning")
Fixes: 61b91eb33a69 ("ipv4: Handle attempt to delete multipath route when fib_info contains an nh reference")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20221124210932.2470010-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
M Chetan Kumar says:
====================
net: wwan: iosm: fix build errors & bugs
This patch series fixes iosm driver bugs & build errors.
PATCH1: Fix kernel build robot reported error.
PATCH2: Fix build error reported on armhf while preparing
6.1-rc5 for Debian.
PATCH3: Fix UL throughput crash.
PATCH4: Fix incorrect skb length.
Refer to commit message for details.
Changes since v1:
* PATCH4: Fix sparse warning.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
skb passed to network layer contains incorrect length.
In mux aggregation protocol, the datagram block received
from device contains block signature, packet & datagram
header. The right skb len to be calculated by subracting
datagram pad len from datagram length.
Whereas in mux lite protocol, the skb contains single
datagram so skb len is calculated by subtracting the
packet offset from datagram header.
Fixes: 1f52d7b62285 ("net: wwan: iosm: Enable M.2 7360 WWAN card support")
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Peek throughput UL test is resulting in crash. If the UL
transfer block free list is exhaust, the peeked skb is freed.
In the next transfer freed skb is referred from UL list which
results in crash.
Don't free the skb if UL transfer blocks are unavailable. The
pending skb will be picked for transfer on UL transfer block
available.
Fixes: 1f52d7b62285 ("net: wwan: iosm: Enable M.2 7360 WWAN card support")
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix build error reported on armhf while preparing 6.1-rc5
for Debian.
iosm_ipc_protocol.c:244:36: error: passing argument 3 of
'dma_alloc_coherent' from incompatible pointer type.
Change phy_ap_shm type from phys_addr_t to dma_addr_t.
Fixes: faed4c6f6f48 ("net: iosm: shared memory protocol")
Reported-by: Bonaccorso Salvatore <carnil@debian.org>
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
sparse warnings - iosm_ipc_mux_codec.c:1474 using plain
integer as NULL pointer.
Use skb_trim() to reset skb tail & len.
Fixes: 9413491e20e1 ("net: iosm: encode or decode datagram")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Tim Harvey reports that link modes which he does not expect to be
supported are being advertised, and this is because of the workaround
we have for PHYs that switch interface modes.
Fix this up by checking whether rate matching will be used for the
requested interface mode, and if rate matching will be used, perform
validation only with the requested interface mode, rather than invoking
this workaround.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In function nixge_hw_dma_bd_release() dereference of NULL pointer
priv->rx_bd_v is possible for the case of its allocation failure in
nixge_hw_dma_bd_init().
Move for() loop with priv->rx_bd_v dereference under the check for
its validity.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 492caffa8a1a ("net: ethernet: nixge: Add support for National Instruments XGE netdev")
Signed-off-by: Yuri Karpov <YKarpov@ispras.ru>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Both p9_fd_create_tcp() and p9_fd_create_unix() will call
p9_socket_open(). If the creation of p9_trans_fd fails,
p9_fd_create_tcp() and p9_fd_create_unix() will return an
error directly instead of releasing the cscoket, which will
result in a socket leak.
This patch adds sock_release() to fix the leak issue.
Fixes: 6b18662e239a ("9p connect fixes")
Signed-off-by: Wang Hai <wanghai38@huawei.com>
ACKed-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The ntb_netdev_init_module() returns the ntb_transport_register_client()
directly without checking its return value, if
ntb_transport_register_client() failed, the NTB client device is not
unregistered.
Fix by unregister NTB client device when ntb_transport_register_client()
failed.
Fixes: 548c237c0a99 ("net: Add support for NTB virtual ethernet device")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The am65_cpsw_nuss_cleanup_ndev() function calls unregister_netdev()
even if register_netdev() fails, which triggers WARN_ON(1) in
unregister_netdevice_many(). To fix it, make sure that
unregister_netdev() is called only on registered netdev.
Compile tested only.
Fixes: 84b4aa493249 ("net: ethernet: ti: am65-cpsw: add multi port support in mac-only mode")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-fixes-2022-11-24
This series provides bug fixes to mlx5 driver.
Focusing on error handling and proper memory management in mlx5, in
general and in the newly added macsec module.
I still have few fixes left in my queue and I hope those will be the
last ones for mlx5 for this cycle.
Please pull and let me know if there is any problem.
Happy thanksgiving.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-11-23 (ixgbevf, i40e, fm10k, iavf, e100)
This series contains updates to various Intel drivers.
Shang XiaoJing fixes init module error path stop to resource leaks for
ixgbevf and i40e.
Yuan Can also does the same for fm10k and iavf.
Wang Hai stops freeing of skb as it was causing use after free error for
e100.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
I got a null-ptr-deref report as following when doing fault injection test:
BUG: kernel NULL pointer dereference, address: 0000000000000058
Oops: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 1 PID: 253 Comm: 507-spi-dm9051 Tainted: G B N 6.1.0-rc3+
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
RIP: 0010:klist_put+0x2d/0xd0
Call Trace:
<TASK>
klist_remove+0xf1/0x1c0
device_release_driver_internal+0x23e/0x2d0
bus_remove_device+0x1bd/0x240
device_del+0x357/0x770
phy_device_remove+0x11/0x30
mdiobus_unregister+0xa5/0x140
release_nodes+0x6a/0xa0
devres_release_all+0xf8/0x150
device_unbind_cleanup+0x19/0xd0
//probe path:
phy_device_register()
device_add()
phy_connect
phy_attach_direct() //set device driver
probe() //it's failed, driver is not bound
device_bind_driver() // probe failed, it's not called
//remove path:
phy_device_remove()
device_del()
device_release_driver_internal()
__device_release_driver() //dev->drv is not NULL
klist_remove() <- knode_driver is not added yet, cause null-ptr-deref
In phy_attach_direct(), after setting the 'dev->driver', probe() fails,
device_bind_driver() is not called, so the knode_driver->n_klist is not
set, then it causes null-ptr-deref in __device_release_driver() while
deleting device. Fix this by setting dev->driver to NULL in the error
path in phy_attach_direct().
Fixes: e13934563db0 ("[PATCH] PHY Layer fixup")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix possible out-of-bound access in ieee80211_get_rate_duration routine
as reported by the following UBSAN report:
UBSAN: array-index-out-of-bounds in net/mac80211/airtime.c:455:47
index 15 is out of range for type 'u16 [12]'
CPU: 2 PID: 217 Comm: kworker/u32:10 Not tainted 6.1.0-060100rc3-generic
Hardware name: Acer Aspire TC-281/Aspire TC-281, BIOS R01-A2 07/18/2017
Workqueue: mt76 mt76u_tx_status_data [mt76_usb]
Call Trace:
<TASK>
show_stack+0x4e/0x61
dump_stack_lvl+0x4a/0x6f
dump_stack+0x10/0x18
ubsan_epilogue+0x9/0x43
__ubsan_handle_out_of_bounds.cold+0x42/0x47
ieee80211_get_rate_duration.constprop.0+0x22f/0x2a0 [mac80211]
? ieee80211_tx_status_ext+0x32e/0x640 [mac80211]
ieee80211_calc_rx_airtime+0xda/0x120 [mac80211]
ieee80211_calc_tx_airtime+0xb4/0x100 [mac80211]
mt76x02_send_tx_status+0x266/0x480 [mt76x02_lib]
mt76x02_tx_status_data+0x52/0x80 [mt76x02_lib]
mt76u_tx_status_data+0x67/0xd0 [mt76_usb]
process_one_work+0x225/0x400
worker_thread+0x50/0x3e0
? process_one_work+0x400/0x400
kthread+0xe9/0x110
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x22/0x30
Fixes: db3e1c40cf2f ("mac80211: Import airtime calculation code from mt76")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In S1G beacon frames there shouldn't be multi-BSSID elements
since that's not supported, remove that to avoid a potential
integer underflow and/or misparsing the frames due to the
different length of the fixed part of the frame.
While at it, initialize non_tx_data so we don't send garbage
values to the user (even if it doesn't seem to matter now.)
Reported-and-tested-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de>
Fixes: 9eaffe5078ca ("cfg80211: convert S1G beacon to scan results")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
For vendor elements, the code here assumes that 5 octets
are present without checking. Since the element itself is
already checked to fit, we only need to check the length.
Reported-and-tested-by: Sönke Huster <shuster@seemoo.tu-darmstadt.de>
Fixes: 0b8fb8235be8 ("cfg80211: Parsing of Multiple BSSID information in scanning")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
When the name_assign_type attribute was introduced (commit
685343fc3ba6, "net: add name_assign_type netdev attribute"), the
loopback device was explicitly mentioned as one which would make use
of NET_NAME_PREDICTABLE:
The name_assign_type attribute gives hints where the interface name of a
given net-device comes from. These values are currently defined:
...
NET_NAME_PREDICTABLE:
The ifname has been assigned by the kernel in a predictable way
that is guaranteed to avoid reuse and always be the same for a
given device. Examples include statically created devices like
the loopback device [...]
Switch to that so that reading /sys/class/net/lo/name_assign_type
produces something sensible instead of returning -EINVAL.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, when a FEC device is brought up, the irq coalesce settings
are reset to their default values (1000us, 200 frames). That's
unexpected, and breaks for example use of an appropriate .link file to
make systemd-udev apply the desired
settings (https://www.freedesktop.org/software/systemd/man/systemd.link.html),
or any other method that would do a one-time setup during early boot.
Refactor the code so that fec_restart() instead uses
fec_enet_itr_coal_set(), which simply applies the settings that are
stored in the private data, and initialize that private data with the
default values.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch addresses pfc_alloc_status array overflow occurring for
send queue index value greater than PFC priority. Queue index can be
greater than supported PFC priority for multiple scenarios (e.g. QoS,
during non zero SMQ allocation for a PF/VF).
In those scenarios the API should return default tx scheduler '0'.
This is causing mbox errors as otx2_get_smq_idx returing invalid smq value.
Fixes: 99c969a83d82 ("octeontx2-pf: Add egress PFC support")
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, pause frame register GMAC_RX_FLOW_CTRL_RFE is not updated
correctly when 'ethtool -A <IFACE> autoneg off rx off tx off' command
is issued. This fix ensures the flow control change is reflected directly
in the GMAC_RX_FLOW_CTRL_RFE register.
Fixes: 46f69ded988d ("net: stmmac: Use resolved link config in mac_link_up()")
Cc: <stable@vger.kernel.org> # 5.10.x
Signed-off-by: Goh, Wei Sheng <wei.sheng.goh@intel.com>
Signed-off-by: Noor Azura Ahmad Tarmizi <noor.azura.ahmad.tarmizi@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
IPV6 addresses are purged when setting the number of rx/tx
rings using ethtool -G. The function aq_set_ringparam
calls dev_close, which removes the addresses. As a solution,
call an internal function (aq_ndev_close).
Fixes: c1af5427954b ("net: aquantia: Ethtool based ring size configuration")
Signed-off-by: Izabela Bakollari <ibakolla@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Defines prefixed with "CONFIG" should be limited to proper Kconfig options,
that are introduced in a Kconfig file.
Here, constants for bitmap indices of some configs are defined and these
defines begin with the config's name, and are suffixed with BITMAP_IDX.
To avoid defines prefixed with "CONFIG", name these constants
BITMAP_IDX_FOR_CONFIG_XYZ instead of CONFIG_XYZ_BITMAP_IDX.
No functional change.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The watchdog timer is used to monitor whether the process
of transmitting data is timeout. If we use qlcnic driver,
the dev_watchdog() that is the timer handler of watchdog
timer will call qlcnic_tx_timeout() to process the timeout.
But the qlcnic_tx_timeout() calls msleep(), as a result,
the sleep-in-atomic-context bugs will happen. The processes
are shown below:
(atomic context)
dev_watchdog
qlcnic_tx_timeout
qlcnic_83xx_idc_request_reset
qlcnic_83xx_lock_driver
msleep
---------------------------
(atomic context)
dev_watchdog
qlcnic_tx_timeout
qlcnic_83xx_idc_request_reset
qlcnic_83xx_lock_driver
qlcnic_83xx_recover_driver_lock
msleep
Fix by changing msleep() to mdelay(), the mdelay() is
busy-waiting and the bugs could be mitigated.
Fixes: 629263acaea3 ("qlcnic: 83xx CNA inter driver communication mechanism")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
linux-can-fixes-for-6.1-20221124
this is a pull request of 8 patches for net/master.
Ziyang Xuan contributes a patch for the can327, fixing a potential SKB
leak when the netdev is down.
Heiko Schocher's patch for the sja1000 driver fixes the width of the
definition of the OCR_MODE_MASK.
Zhang Changzhong contributes 4 patches. In the sja1000_isa, cc770, and
m_can_pci drivers the error path in the probe() function and in case
of the etas_es58x a function that is called by probe() are fixed.
Jiasheng Jiang add a missing check for the return value of the
devm_clk_get() in the m_can driver.
Yasushi SHOJI's patch for the mcba_usb fixes setting of the external
termination resistor.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is no validation of 'e->no_of_channels' which can trigger an
out-of-bounds write in the following 'memset' call. Validate that the
number of channels does not extends beyond the size of the channel list
element.
Signed-off-by: Phil Turnbull <philipturnbull@github.com>
Tested-by: Ajay Kathat <ajay.kathat@microchip.com>
Acked-by: Ajay Kathat <ajay.kathat@microchip.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221123153543.8568-5-philipturnbull@github.com
|
|
Validate that the IEEE80211_P2P_ATTR_CHANNEL_LIST attribute contains
enough space for a 'struct wilc_attr_oper_ch'. If the attribute is too
small then it can trigger an out-of-bounds write later in the function.
'struct wilc_attr_oper_ch' is variable sized so also check 'attr_len'
does not extend beyond the end of 'buf'.
Signed-off-by: Phil Turnbull <philipturnbull@github.com>
Tested-by: Ajay Kathat <ajay.kathat@microchip.com>
Acked-by: Ajay Kathat <ajay.kathat@microchip.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221123153543.8568-4-philipturnbull@github.com
|
|
Validate that the IEEE80211_P2P_ATTR_OPER_CHANNEL attribute contains
enough space for a 'struct struct wilc_attr_oper_ch'. If the attribute is
too small then it triggers an out-of-bounds write later in the function.
Signed-off-by: Phil Turnbull <philipturnbull@github.com>
Tested-by: Ajay Kathat <ajay.kathat@microchip.com>
Acked-by: Ajay Kathat <ajay.kathat@microchip.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221123153543.8568-3-philipturnbull@github.com
|
|
There is no validation of 'offset' which can trigger an out-of-bounds
read when extracting RSN capabilities.
Signed-off-by: Phil Turnbull <philipturnbull@github.com>
Tested-by: Ajay Kathat <ajay.kathat@microchip.com>
Acked-by: Ajay Kathat <ajay.kathat@microchip.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221123153543.8568-2-philipturnbull@github.com
|
|
Microchip USB Analyzer can activate the internal termination resistors
by setting the "termination" option ON, or OFF to to deactivate them.
As I've observed, both with my oscilloscope and captured USB packets
below, you must send "0" to turn it ON, and "1" to turn it OFF.
From the schematics in the user's guide, I can confirm that you must
drive the CAN_RES signal LOW "0" to activate the resistors.
Reverse the argument value of usb_msg.termination to fix this.
These are the two commands sequence, ON then OFF.
> No. Time Source Destination Protocol Length Info
> 1 0.000000 host 1.3.1 USB 46 URB_BULK out
>
> Frame 1: 46 bytes on wire (368 bits), 46 bytes captured (368 bits)
> USB URB
> Leftover Capture Data: a80000000000000000000000000000000000a8
>
> No. Time Source Destination Protocol Length Info
> 2 4.372547 host 1.3.1 USB 46 URB_BULK out
>
> Frame 2: 46 bytes on wire (368 bits), 46 bytes captured (368 bits)
> USB URB
> Leftover Capture Data: a80100000000000000000000000000000000a9
Signed-off-by: Yasushi SHOJI <yashi@spacecubics.com>
Link: https://lore.kernel.org/all/20221124152504.125994-1-yashi@spacecubics.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Since the devm_clk_get may return error,
it should be better to add check for the cdev->hclk,
as same as cdev->cclk.
Fixes: f524f829b75a ("can: m_can: Create a m_can platform framework")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/all/20221123063651.26199-1-jiasheng@iscas.ac.cn
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
In m_can_pci_remove() and error handling path of m_can_pci_probe(),
m_can_class_free_dev() should be called to free resource allocated by
m_can_class_allocate_dev(), otherwise there will be memleak.
Fixes: cab7ffc0324f ("can: m_can: add PCI glue driver for Intel Elkhart Lake")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Link: https://lore.kernel.org/all/1668168684-6390-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
In case of register_candev() fails, clear
es58x_dev->netdev[channel_idx] and add free_candev(). Otherwise
es58x_free_netdevs() will unregister the netdev that has never been
registered.
Fixes: 8537257874e9 ("can: etas_es58x: add core support for ETAS ES58X CAN USB interfaces")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Acked-by: Arunachalam Santhanam <Arunachalam.Santhanam@in.bosch.com>
Acked-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/1668413685-23354-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Add the missing free_cc770dev() before return from cc770_isa_probe()
in the register_cc770dev() error handling case.
In addition, remove blanks before goto labels.
Fixes: 7e02e5433e00 ("can: cc770: legacy CC770 ISA bus driver")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Link: https://lore.kernel.org/all/1668168557-6024-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Add the missing free_sja1000dev() before return from
sja1000_isa_probe() in the register_sja1000dev() error handling case.
In addition, remove blanks before goto labels.
Fixes: 2a6ba39ad6a2 ("can: sja1000: legacy SJA1000 ISA bus driver")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Link: https://lore.kernel.org/all/1668168521-5540-1-git-send-email-zhangchangzhong@huawei.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
bitfield mode in ocr register has only 2 bits not 3, so correct
the OCR_MODE_MASK define.
Signed-off-by: Heiko Schocher <hs@denx.de>
Link: https://lore.kernel.org/all/20221123071636.2407823-1-hs@denx.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
