summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2013-12-10ARM: shmobile: Enable PFC/GPIO on the Koelsch boardMagnus Damm1-0/+1
Enable r8a7791 PFC and GPIO on the Koelsch board. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: bockw: use regulator for MMCIFKuninori Morimoto1-4/+9
When regulators are used with MMC devices, sh_mmcif_plat_data::ocr is not needed, they can be removed from platform data. This patch adds v3.3 regulator settings, and moved fixed-dummy regulator registration position Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10Merge tag 'renesas-cleanup-for-v3.14' into boards-baseSimon Horman13-93/+59
Renesas ARM based SoC cleanups for v3.14 * Tidy up clock table order for r7s72100, r8a7779, r8a7779, r8a7790, sh7372 and sh73a0 SoCs. * Tidy up camera-rcar header for r8a7779 SoC * Tidy up registration of VIN on r8a7779 SoC * Tidy up PFC registration on r8a7790 SoC * Correct typo in clocks for r8a7790 SoC * Don't use named resources for IPMMU, I2C and TMU on sh73a0 SoC * Don't use named resources for MMCIF and SDHI on ape6evm board * Don't use named resources for MMCIF on lager board * Tidy up device registration on lager board * Tidy up headers for bockw board
2013-12-10ARM: shmobile: r8a7779: add HSPI clock support for DTSimon Horman1-0/+3
Based on work for the r8a7778 SoC by Kuninori Morimoto. Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: r8a7740: add FSI clock support for DTKuninori Morimoto1-0/+1
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: r8a7790: add SSI MSTP clocksKuninori Morimoto1-0/+25
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: r8a7778: add HPBIFx DMAEngine supportKuninori Morimoto2-0/+69
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: Select AUTO_ZRELADDR for EMEV2Simon Horman1-0/+1
Since ("ARM: shmobile: Remove legacy KZM9D board code") It is now necessary for AUTO_ZRELADDR to be selected in order for the kernel to build with kzm9d_defconfig. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: r8a7790: tidyup clock table orderKuninori Morimoto1-5/+8
SuperH lookups clock is using CLKDEV_CON/DEV/ICK_ID() macro for a long term. But in these days, the ICK clock is defined in random place. This patch arranges it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: r8a7790: fixup I2C clock sourceKuninori Morimoto1-4/+4
I2C clock is based on P clock, not HP clock Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: r8a7790: care EXTAL divider settingsKuninori Morimoto1-2/+2
EXTAL clock frequency needs 1/2 when (MD14, MD13, MD19) = (1, x, x). Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: Add r8a7791 clocks for thermal devicesMagnus Damm1-0/+4
Add the r8a7791 thermal device as legacy clocks. Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: Add r8a7791 thermal platform deviceMagnus Damm1-0/+12
Add a thermal platform device for the legacy case on the r8a7791 SoC. This keeps the r8a7791 in sync with the r8a7790 sister device. Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: Add r8a7790 clocks for thermal devicesMagnus Damm1-0/+1
Add the r8a7790 DT thermal device to the legacy clocks. Signed-off-by: Magnus Damm <damm@opensource.se> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: Rename ARCH_SHMOBILE to ARCH_SHMOBILE_LEGACYLaurent Pinchart15-21/+26
SH-Mobile platforms are transitioning from non-multiplatform to multiplatform kernel. A new ARCH_SHMOBILE_MULTI configuration symbol has been created to group all multiplatform-enabled SH-Mobile SoCs. The existing ARCH_SHMOBILE configuration symbol groups SoCs that haven't been converted yet. This arrangement works fine for the arch/ code, but lots of drivers needed on both ARCH_SHMOBILE and ARCH_SHMOBILE_MULTI depend on ARCH_SHMOBILE only. In order to avoid changing them, rename ARCH_SHMOBILE to ARCH_SHMOBILE_LEGACY, and create a new boolean ARCH_SHMOBILE configuration symbol that is selected by both ARCH_SHMOBILE_LEGACY and ARCH_SHMOBILE_MULTI. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-10ARM: shmobile: r8a7791: Add DU and LVDS clocksLaurent Pinchart1-1/+9
The ZX parent clock isn't implemented yet, add it as well. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-04ARM: shmobile: Select USE_OF on EMEV2Magnus Damm2-4/+1
Now when the legacy KZM9D board code is gone, make sure USE_OF is selected in case of the EMEV2 SoC. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-04ARM: shmobile: r8a7778: add HSPI clock support for DTKuninori Morimoto1-0/+3
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-04ARM: shmobile: Remove legacy platform devices from EMEV2 SoC codeMagnus Damm2-153/+0
Now when KZM9D legacy C board support code is gone then remove emev2_add_standard_devices() and all the platform devices from setup-emev2.c. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-04ARM: shmobile: Remove legacy KZM9D board codeMagnus Damm4-100/+0
Remove the C and platform device version of KZM9D. The DT version of KZM9D board support can now instead directly be used with SoC specific code in setup-emev2.c. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-04ARM: shmobile: Use ->init_late() in shared EMEV2 caseMagnus Damm1-0/+1
Hook up shmobile_init_late() to enable various code such as suspend-to-RAM and CPUIdle. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-04ARM: shmobile: Add shared EMEV2 code for ->init_machine()Magnus Damm1-0/+12
Add a SoC specific function that initializes clocks and starts DT probing in case of EMEV2. This EMEV2 SoC support code may be built for either legacy SHMOBILE or SMOBILE_MULTI. The change allows us to support existing board specific KZM9D DTB with these SoC specific DT_MACHINE_START() callbacks. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-04ARM: shmobile: Enable MTU2 on r7s72100Magnus Damm2-0/+23
Add MTU2 as r7s72100 system timer. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-04ARM: shmobile: r8a7790: add QSPI supportHiep Cao Minh1-0/+3
Adds support for QSPI on the r8a7790. Signed-off-by: Hiep Cao Minh <cm-hiep@jinso.co.jp> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-04ARM: shmobile: r8a7790: Add USBHS clock supportValentine Barshak1-0/+4
This adds USBHS clock support. Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-04ARM: shmobile: r8a7779: add SDHI clock support for DTKuninori Morimoto1-0/+4
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-04ARM: shmobile: r8a7778: add SDHI clock support for DTKuninori Morimoto1-0/+3
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-04ARM: shmobile: r8a7778: add MMCIF clock support for DTKuninori Morimoto1-0/+1
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-04ARM: shmobile: Select GPIO in case of the r7s72100 SoCMagnus Damm1-0/+1
The r7s72100 contains GPIO controllers so make sure the GPIO subsystem can be built by selecting ARCH_WANT_OPTIONAL_GPIOLIB. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-04ARM: shmobile: r8a73a4: don't use named irq for DMAEngineKuninori Morimoto1-1/+1
sh-dma-engine driver doesn't care irq name. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-04ARM: shmobile: r8a7791 GPIO platform device supportMagnus Damm1-0/+40
Add GPIO controller platform devices for the r8a7791 SoC. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-04ARM: shmobile: Select GPIO in case of the r8a7791 SoCMagnus Damm1-0/+1
Make it possible to build GPIO on r8a7791. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-04ARM: shmobile: r8a7791 PFC platform device supportMagnus Damm2-0/+14
Add a platform device for the r8a7791 PFC device. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-04ARM: shmobile: Select IRQC in case of the r8a7791 SoCMagnus Damm1-0/+1
The r8a7791 contains IRQC hardware so make sure the driver gets built by selecting RENESAS_IRQC. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-04ARM: shmobile: r8a7779: add I2C clock for DTKuninori Morimoto1-0/+4
10e8d4f6dddb0f9dc408c2f2bde8399b243a42ca (ARM: mach-shmobile: r8a7779: Minimal setup using DT) added I2C driver for DT, but it didn't add clock. This patch adds missing clock for I2C Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-12-04ARM: shmobile: r8a7778: add I2C clock for DTKuninori Morimoto1-0/+4
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-11-24ARM: shmobile: sh7372: tidyup clock table orderKuninori Morimoto1-4/+5
SuperH lookups clock is using CLKDEV_CON/DEV/ICK_ID() macro for a long term. But in these days, the ICK clock is defined in random place. This patch arranges it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-11-24ARM: shmobile: r7s72100: tidyup clock table orderKuninori Morimoto1-0/+3
SuperH lookups clock is using CLKDEV_CON/DEV/ICK_ID() macro for a long term. But in these days, the ICK clock is defined in random place. This patch arranges it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-11-24ARM: shmobile: sh73a0: tidyup clock table orderKuninori Morimoto1-6/+8
SuperH lookups clock is using CLKDEV_CON/DEV/ICK_ID() macro for a long term. But in these days, the ICK clock is defined in random place. This patch arranges it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-11-24ARM: shmobile: r8a7779: cleanup registration of sh_ethKuninori Morimoto2-22/+0
sh_eth driver which needs platform data at the time of registration is not used. Now, ARM/shmobile aims to support DT, and the C code base board support will be removed if DT support is completed. Current driver registration method which needs platform data and which is not shared complicates codes. This means legacy C code cleanup after DT supporting will be more complicated This patch removes r8a7779_add_ether_device() Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-11-24ARM: shmobile: r8a7790: Correct typo in clocksSimon Horman1-1/+1
This is the r8a7790 SoC not the r8a77a4 SoC and clocks are updated in r8a7790_clock_init not r8a73a4_clock_init. Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-11-24ARM: shmobile: r8a7779: camera-rcar header cleanupKuninori Morimoto2-1/+1
<linux/platform_data/camera-rcar.h> is needed on Marzen, not setup-r8a7779.c Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-11-24ARM: shmobile: Add r8a7790_register_pfc() functionMagnus Damm1-2/+5
Break out the r8a7790 PFC platform device creation code to increase readability and follow same style as r8a7791. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-11-24ARM: shmobile: Cosmetic update of Lager DT ReferenceMagnus Damm1-3/+2
Clean up the Lager DT reference board code to make it match Koelsch DT reference including using the rcar-gen2 header. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-11-24ARM: shmobile: r8a7779: cleanup registration of VINKuninori Morimoto3-41/+22
VIN driver which needs platform data at the time of registration is used from Marzen only. Now, ARM/shmobile aims to support DT, and the C code base board support will be removed if DT support is completed. Current driver registration method which needs platform data and which is not shared complicates codes. This means legacy C code cleanup after DT supporting will be more complicated This patch registers it on board code as cleanup C code Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-11-24ARM: shmobile: bockw: header cleanupKuninori Morimoto1-1/+0
linux/pinctrl/machine.h is no longer needed Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-11-24ARM: shmobile: sh73a0: don't use named resource for IPMMUKuninori Morimoto1-1/+1
shmobile-ipmmu driver doesn't care resource name. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-11-24ARM: shmobile: sh73a0: don't use named resource for I2CKuninori Morimoto1-5/+5
i2c-sh_mobile driver doesn't care resource name. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-11-24ARM: shmobile: sh73a0: don't use named resource for TMUKuninori Morimoto1-2/+2
sh_tmu driver doesn't care resource name. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-11-24ARM: shmobile: lager: don't use named resource for MMCIFKuninori Morimoto1-1/+1
sh_mmcif driver doesn't care resource name. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
generated by cgit v1.2.3 (git 2.39.1) at 2025-02-17 00:57:58 +0000