summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2011-08-25drbd: Request lookup code cleanup (3)Andreas Gruenbacher1-22/+6
Get rid of the ar_id_to_req() and ack_id_to_req() wrappers. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-08-25drbd: Request lookup code cleanup (2)Andreas Gruenbacher1-25/+24
Unify the ar_id_to_req() and ack_id_to_req() functions: make both fail if the consistency check fails. Move the request lookup code now duplicated in both functions into its own function. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-08-25drbd: Request lookup code cleanup (1)Andreas Gruenbacher2-26/+27
Move _ar_id_to_req() to drbd_receiver.c and mark it non-inline. Remove the leading underscores from _ar_id_to_req() and _ack_id_to_req(). Mark ar_hash_slot() inline. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-08-25drbd: Update outdated commentAndreas Gruenbacher1-2/+2
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-08-25drbd: Move drbd_free_tl_hash() to drbd_main()Andreas Gruenbacher3-31/+30
This is the only place where this function is used. Make it static. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-08-25drbd: Magic reserved block_id value cleanupAndreas Gruenbacher3-20/+7
The ID_VACANT definition has become entirely irrelevant by now. The is_syncer_block_id() macro does not improve the code, so eliminated it. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-08-25drbd: Endianness convert the constants instead of the variablesAndreas Gruenbacher2-2/+2
Converting the constants happens at compile time. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-08-25drbd: Get rid of BE_DRBD_MAGIC and BE_DRBD_MAGIC_BIGAndreas Gruenbacher3-13/+11
Converting the constants happens at compile time. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-08-25drbd: Consistently use block_id == ID_SYNCER for checksum based resync and ↵Andreas Gruenbacher3-5/+7
online verify DRBD_MAGIC has nothing to do with block ids and the funny values computed were not actually used, anyway. Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-08-25drbd: Remove superfluous declarationAndreas Gruenbacher1-1/+0
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-08-25drbd: Get rid of req_validator_fn typedefAndreas Gruenbacher1-4/+2
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com> Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
2011-08-23loop: always allow userspace partitions and optionally support automatic ↵Kay Sievers2-4/+46
scanning Automatic partition scanning can be requested individually per loop device during its setup by setting LO_FLAGS_PARTSCAN. By default, no partition tables are scanned. Userspace can now always add and remove partitions from all loop devices, regardless if the in-kernel partition scanner is enabled or not. The needed partition minor numbers are allocated from the extended minors space, the main loop device numbers will continue to match the loop minors, regardless of the number of partitions used. # grep . /sys/class/block/loop1/loop/* /sys/block/loop1/loop/autoclear:0 /sys/block/loop1/loop/backing_file:/home/kay/data/stuff/part.img /sys/block/loop1/loop/offset:0 /sys/block/loop1/loop/partscan:1 /sys/block/loop1/loop/sizelimit:0 # ls -l /dev/loop* brw-rw---- 1 root disk 7, 0 Aug 14 20:22 /dev/loop0 brw-rw---- 1 root disk 7, 1 Aug 14 20:23 /dev/loop1 brw-rw---- 1 root disk 259, 0 Aug 14 20:23 /dev/loop1p1 brw-rw---- 1 root disk 259, 1 Aug 14 20:23 /dev/loop1p2 brw-rw---- 1 root disk 7, 99 Aug 14 20:23 /dev/loop99 brw-rw---- 1 root disk 259, 2 Aug 14 20:23 /dev/loop99p1 brw-rw---- 1 root disk 259, 3 Aug 14 20:23 /dev/loop99p2 crw------T 1 root root 10, 237 Aug 14 20:22 /dev/loop-control Cc: Karel Zak <kzak@redhat.com> Cc: Davidlohr Bueso <dave@gnu.org> Acked-By: Tejun Heo <tj@kernel.org> Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-08-23Merge branch 'for-3.2/core' into for-3.2/driversJens Axboe4-6/+8
2011-08-23block: add GENHD_FL_NO_PART_SCANTejun Heo4-6/+8
There are cases where suppressing partition scan is useful - e.g. for lo devices and pseudo SATA devices which advertise to be a disk but get upset on partition scan (some port multiplier control devices show such behavior). This patch adds GENHD_FL_NO_PART_SCAN which suppresses partition scan regardless of the number of possible partitions. disk_partitionable() is renamed to disk_part_scan_enabled() as suppressing partition scan doesn't imply the device can't be partitioned using BLKPG_ADD/DEL_PARTITION calls from userland. show_partition() now directly tests disk_max_parts() to maintain backward-compatibility. -v2: Updated to make it clear that only partition scan is suppressed not partitioning itself as suggested by Kay Sievers. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-08-19loop: add discard support for loop devicesLukas Czerner1-0/+54
This commit adds discard support for loop devices. Discard is usually supported by SSD and thinly provisioned devices as a method for reclaiming unused space. This is no different than trying to reclaim back space which is not used by the file system on the image, but it still occupies space on the host file system. We can do the reclamation on file system which does support hole punching. So when discard request gets to the loop driver we can translate that to punch a hole to the underlying file, hence reclaim the free space. This is very useful for trimming down the size of the image to only what is really used by the file system on that image. Fstrim may be used for that purpose. It has been tested on ext4, xfs and btrfs with the image file systems ext4, ext3, xfs and btrfs. ext4, or ext6 image on ext4 file system has some problems but it seems that ext4 punch hole implementation is somewhat flawed and it is unrelated to this commit. Also this is a very good method of validating file systems punch hole implementation. Note that when encryption is used, discard support is disabled, because using it might leak some information useful for possible attacker. Signed-off-by: Lukas Czerner <lczerner@redhat.com> Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-08-19nbd-replace-some-printk-with-dev_warn-and-dev_info-checkpatch-fixesAndrew Morton1-1/+1
ERROR: code indent should use tabs where possible #30: FILE: drivers/block/nbd.c:578: +^I dev_info(disk_to_dev(lo->disk), "NBD_DISCONNECT\n");$ total: 1 errors, 0 warnings, 35 lines checked NOTE: whitespace errors detected, you may wish to use scripts/cleanpatch or scripts/cleanfile ./patches/nbd-replace-some-printk-with-dev_warn-and-dev_info.patch has style problems, please review. If any of these errors are false positives, please report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Paul Clements <Paul.Clements@steeleye.com> Cc: WANG Cong <amwang@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-08-19nbd: replace some printk with dev_warn() and dev_info()WANG Cong1-6/+5
Signed-off-by: WANG Cong <amwang@redhat.com> Cc: Paul Clements <Paul.Clements@steeleye.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-08-19nbd: lower the loglevel of an error messageWANG Cong1-1/+1
This is only an error, no need to use KERN_CRIT log level. Signed-off-by: WANG Cong <amwang@redhat.com> Cc: Paul Clements <Paul.Clements@steeleye.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-08-19nbd: replace printk KERN_ERR with dev_err()WANG Cong1-25/+25
Signed-off-by: WANG Cong <amwang@redhat.com> Cc: Paul Clements <Paul.Clements@steeleye.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-08-19nbd: replace sysfs_create_file() with device_create_file()WANG Cong1-3/+3
Signed-off-by: WANG Cong <amwang@redhat.com> Cc: Paul Clements <Paul.Clements@steeleye.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-08-19nbd: use task_pid_nr() to get current pidWANG Cong1-1/+1
Signed-off-by: WANG Cong <amwang@redhat.com> Cc: Paul Clements <Paul.Clements@steeleye.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-08-08cciss: add transport mode attribute to sysJoe Handzik2-0/+20
Signed-off-by: Joseph Handzik <joseph.t.handzik@beardog.cce.hp.com> Acked-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-08-08cciss: Adds simple mode functionalityJoseph Handzik3-11/+56
Signed-off-by: Joseph Handzik <joseph.t.handzik@beardog.cce.hp.com> Acked-by: Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by: Jens Axboe <jaxboe@fusionio.com>
2011-08-07Linux 3.1-rc1v3.1-rc1Linus Torvalds1-2/+2
2011-08-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds1-2/+4
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc: Fix build with DEBUG_PAGEALLOC enabled.
2011-08-07sh: Fix boot crash related to SCIRafael J. Wysocki1-1/+1
Commit d006199e72a9 ("serial: sh-sci: Regtype probing doesn't need to be fatal.") made sci_init_single() return when sci_probe_regmap() succeeds, although it should return when sci_probe_regmap() fails. This causes systems using the serial sh-sci driver to crash during boot. Fix the problem by using the right return condition. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-07arm: remove stale export of 'sha_transform'Linus Torvalds1-3/+0
The generic library code already exports the generic function, this was left-over from the ARM-specific version that just got removed. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-07arm: remove "optimized" SHA1 routinesLinus Torvalds2-212/+1
Since commit 1eb19a12bd22 ("lib/sha1: use the git implementation of SHA-1"), the ARM SHA1 routines no longer work. The reason? They depended on the larger 320-byte workspace, and now the sha1 workspace is just 16 words (64 bytes). So the assembly version would overwrite the stack randomly. The optimized asm version is also probably slower than the new improved C version, so there's no reason to keep it around. At least that was the case in git, where what appears to be the same assembly language version was removed two years ago because the optimized C BLK_SHA1 code was faster. Reported-and-tested-by: Joachim Eastwood <manabian@gmail.com> Cc: Andreas Schwab <schwab@linux-m68k.org> Cc: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-07fix rcu annotations noise in cred.hAl Viro1-5/+6
task->cred is declared as __rcu, and access to other tasks' ->cred is, indeed, protected. Access to current->cred does not need rcu_dereference() at all, since only the task itself can change its ->cred. sparse, of course, has no way of knowing that... Add force-cast in current_cred(), make current_fsuid() et.al. use it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-07vfs: rename 'do_follow_link' to 'should_follow_link'Linus Torvalds1-2/+2
Al points out that the do_follow_link() helper function really is misnamed - it's about whether we should try to follow a symlink or not, not about actually doing the following. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-07Fix POSIX ACL permission checkAri Savolainen1-1/+1
After commit 3567866bf261: "RCUify freeing acls, let check_acl() go ahead in RCU mode if acl is cached" posix_acl_permission is being called with an unsupported flag and the permission check fails. This patch fixes the issue. Signed-off-by: Ari Savolainen <ari.m.savolainen@gmail.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2011-08-06Merge branch 'for-linus' of git://git.open-osd.org/linux-open-osdLinus Torvalds9-504/+617
* 'for-linus' of git://git.open-osd.org/linux-open-osd: ore: Make ore its own module exofs: Rename raid engine from exofs/ios.c => ore exofs: ios: Move to a per inode components & device-table exofs: Move exofs specific osd operations out of ios.c exofs: Add offset/length to exofs_get_io_state exofs: Fix truncate for the raid-groups case exofs: Small cleanup of exofs_fill_super exofs: BUG: Avoid sbi realloc exofs: Remove pnfs-osd private definitions nfs_xdr: Move nfs4_string definition out of #ifdef CONFIG_NFS_V4
2011-08-06vfs: optimize inode cache access patternsLinus Torvalds4-34/+106
The inode structure layout is largely random, and some of the vfs paths really do care. The path lookup in particular is already quite D$ intensive, and profiles show that accessing the 'inode->i_op->xyz' fields is quite costly. We already optimized the dcache to not unnecessarily load the d_op structure for members that are often NULL using the DCACHE_OP_xyz bits in dentry->d_flags, and this does something very similar for the inode ops that are used during pathname lookup. It also re-orders the fields so that the fields accessed by 'stat' are together at the beginning of the inode structure, and roughly in the order accessed. The effect of this seems to be in the 1-2% range for an empty kernel "make -j" run (which is fairly kernel-intensive, mostly in filename lookup), so it's visible. The numbers are fairly noisy, though, and likely depend a lot on exact microarchitecture. So there's more tuning to be done. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-06vfs: renumber DCACHE_xyz flags, remove some stale onesLinus Torvalds2-18/+14
Gcc tends to generate better code with small integers, including the DCACHE_xyz flag tests - so move the common ones to be first in the list. Also just remove the unused DCACHE_INOTIFY_PARENT_WATCHED and DCACHE_AUTOFS_PENDING values, their users no longer exists in the source tree. And add a "unlikely()" to the DCACHE_OP_COMPARE test, since we want the common case to be a nice straight-line fall-through. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds18-453/+325
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: net: Compute protocol sequence numbers and fragment IDs using MD5. crypto: Move md5_transform to lib/md5.c
2011-08-06ore: Make ore its own moduleBoaz Harrosh3-1/+23
Export everything from ore need exporting. Change Kbuild and Kconfig to build ore.ko as an independent module. Import ore from exofs Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2011-08-06exofs: Rename raid engine from exofs/ios.c => oreBoaz Harrosh6-255/+295
ORE stands for "Objects Raid Engine" This patch is a mechanical rename of everything that was in ios.c and its API declaration to an ore.c and an osd_ore.h header. The ore engine will later be used by the pnfs objects layout driver. * File ios.c => ore.c * Declaration of types and API are moved from exofs.h to a new osd_ore.h * All used types are prefixed by ore_ from their exofs_ name. * Shift includes from exofs.h to osd_ore.h so osd_ore.h is independent, include it from exofs.h. Other than a pure rename there are no other changes. Next patch will move the ore into it's own module and will export the API to be used by exofs and later the layout driver Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2011-08-06exofs: ios: Move to a per inode components & device-tableBoaz Harrosh4-183/+218
Exofs raid engine was saving on memory space by having a single layout-info, single pid, and a single device-table, global to the filesystem. Then passing a credential and object_id info at the io_state level, private for each inode. It would also devise this contraption of rotating the device table view for each inode->ino to spread out the device usage. This is not compatible with the pnfs-objects standard, demanding that each inode can have it's own layout-info, device-table, and each object component it's own pid, oid and creds. So: Bring exofs raid engine to be usable for generic pnfs-objects use by: * Define an exofs_comp structure that holds obj_id and credential info. * Break up exofs_layout struct to an exofs_components structure that holds a possible array of exofs_comp and the array of devices + the size of the arrays. * Add a "comps" parameter to get_io_state() that specifies the ids creds and device array to use for each IO. This enables to keep the layout global, but the device-table view, creds and IDs at the inode level. It only adds two 64bit to each inode, since some of these members already existed in another form. * ios raid engine now access layout-info and comps-info through the passed pointers. Everything is pre-prepared by caller for generic access of these structures and arrays. At the exofs Level: * Super block holds an exofs_components struct that holds the device array, previously in layout. The devices there are in device-table order. The device-array is twice bigger and repeats the device-table twice so now each inode's device array can point to a random device and have a round-robin view of the table, making it compatible to previous exofs versions. * Each inode has an exofs_components struct that is initialized at load time, with it's own view of the device table IDs and creds. When doing IO this gets passed to the io_state together with the layout. While preforming this change. Bugs where found where credentials with the wrong IDs where used to access the different SB objects (super.c). As well as some dead code. It was never noticed because the target we use does not check the credentials. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2011-08-06exofs: Move exofs specific osd operations out of ios.cBoaz Harrosh4-73/+79
ios.c will be moving to an external library, for use by the objects-layout-driver. Remove from it some exofs specific functions. Also g_attr_logical_length is used both by inode.c and ios.c move definition to the later, to keep it independent Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2011-08-06exofs: Add offset/length to exofs_get_io_stateBoaz Harrosh3-16/+38
In future raid code we will need to know the IO offset/length and if it's a read or write to determine some of the array sizes we'll need. So add a new exofs_get_rw_state() API for use when writeing/reading. All other simple cases are left using the old way. The major change to this is that now we need to call exofs_get_io_state later at inode.c::read_exec and inode.c::write_exec when we actually know these things. So this patch is kept separate so I can test things apart from other changes. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
2011-08-06net: Compute protocol sequence numbers and fragment IDs using MD5.David S. Miller14-361/+223
Computers have become a lot faster since we compromised on the partial MD4 hash which we use currently for performance reasons. MD5 is a much safer choice, and is inline with both RFC1948 and other ISS generators (OpenBSD, Solaris, etc.) Furthermore, only having 24-bits of the sequence number be truly unpredictable is a very serious limitation. So the periodic regeneration and 8-bit counter have been removed. We compute and use a full 32-bit sequence number. For ipv6, DCCP was found to use a 32-bit truncated initial sequence number (it needs 43-bits) and that is fixed here as well. Reported-by: Dan Kaminsky <dan@doxpara.com> Tested-by: Willy Tarreau <w@1wt.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-06crypto: Move md5_transform to lib/md5.cDavid S. Miller4-92/+102
We are going to use this for TCP/IP sequence number and fragment ID generation. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6Linus Torvalds6-18/+14
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: cifs: cope with negative dentries in cifs_get_root cifs: convert prefixpath delimiters in cifs_build_path_to_root CIFS: Fix missing a decrement of inFlight value cifs: demote DFS referral lookup errors to cFYI Revert "cifs: advertise the right receive buffer size to the server"
2011-08-06Merge branch 'pm-fixes' of ↵Linus Torvalds3-9/+14
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6 * 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: PM / Runtime: Allow _put_sync() from interrupts-disabled context PM / Domains: Fix pm_genpd_poweron()
2011-08-06Merge branch 'for_linus' of ↵Linus Torvalds25-84/+799
git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86: (38 commits) acer-wmi: support Lenovo ideapad S205 wifi switch acerhdf.c: spaces in aliased changed to * platform-drivers-x86: ideapad-laptop: add missing ideapad_input_exit in ideapad_acpi_add error path x86 driver: fix typo in TDP override enabling Platform: fix samsung-laptop DMI identification for N150/N210/220/N230 dell-wmi: Add keys for Dell XPS L502X platform-drivers-x86: samsung-q10: make dmi_check_callback return 1 Platform: Samsung Q10 backlight driver platform-drivers-x86: intel_scu_ipc: convert to DEFINE_PCI_DEVICE_TABLE platform-drivers-x86: intel_rar_register: convert to DEFINE_PCI_DEVICE_TABLE platform-drivers-x86: intel_menlow: add missing return AE_OK for intel_menlow_register_sensor() platform-drivers-x86: intel_mid_thermal: fix memory leak platform-drivers-x86: msi-wmi: add missing sparse_keymap_free in msi_wmi_init error path Samsung Laptop platform driver: support N510 asus-wmi: add uwb rfkill support asus-wmi: add gps rfkill support asus-wmi: add CWAP support and clarify the meaning of WAPF bits asus-wmi: return proper value in store_cpufv() asus-wmi: check for temp1 presence asus-wmi: add thermal sensor ...
2011-08-06Merge branch 'stable/bug.fixes' of ↵Linus Torvalds4-8/+7
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen * 'stable/bug.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/trace: Fix compile error when CONFIG_XEN_PRIVILEGED_GUEST is not set xen: Fix misleading WARN message at xen_release_chunk xen: Fix printk() format in xen/setup.c xen/tracing: it looks like we wanted CONFIG_FTRACE xen/self-balloon: Add dependency on tmem. xen/balloon: Fix compile errors - missing header files. xen/grant: Fix compile warning. xen/pciback: remove duplicated #include
2011-08-06Merge branch 'release' of ↵Linus Torvalds1-3/+7
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: Battery: sysfs_remove_battery(): possible circular locking
2011-08-06savagedb: Fix typo causing regression in savage4 series video chip detectionJohn Stanley1-1/+1
Two additional savage4 variants were added, but the S3_SAVAGE4_SERIES macro was incompletely modified, resulting in a false positive detection of a savage4 card regardless of which savage card is actually present. For non-savage4 series cards, such as a Savage/IX-MV card, this results in garbled video and/or a hard-hang at boot time. Fix this by changing an '||' to an '&&' in the S3_SAVAGE4_SERIES macro. Signed-off-by: John P. Stanley <jpsinthemix@verizon.net> Reviewed-by: Tormod Volden <debian.tormod@gmail.com> [ The macros have incomplete parenthesis too, but whatever .. -Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-06CodingStyle: Document the exception of not splitting user-visible strings, ↵Josh Triplett1-16/+7
for grepping Patch reviewers now recommend not splitting long user-visible strings, such as printk messages, even if they exceed 80 columns. This avoids breaking grep. However, that recommendation did not actually appear anywhere in Documentation/CodingStyle. See, for example, the thread at http://news.gmane.org/find-root.php?message_id=%3c1312215262.11635.15.camel%40Joe%2dLaptop%3e Signed-off-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-06vfs: show O_CLOEXE bit properly in /proc/<pid>/fdinfo/<fd> filesLinus Torvalds1-1/+9
The CLOEXE bit is magical, and for performance (and semantic) reasons we don't actually maintain it in the file descriptor itself, but in a separate bit array. Which means that when we show f_flags, the CLOEXE status is shown incorrectly: we show the status not as it is now, but as it was when the file was opened. Fix that by looking up the bit properly in the 'fdt->close_on_exec' bit array. Uli needs this in order to re-implement the pfiles program: "For normal file descriptors (not sockets) this was the last piece of information which wasn't available. This is all part of my 'give Solaris users no reason to not switch' effort. I intend to offer the code to the util-linux-ng maintainers." Requested-by: Ulrich Drepper <drepper@akkadia.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-04 20:16:26 +0000