summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2012-01-05vmxnet3" make ethtool ops conststephen hemminger1-1/+1
All tables of function pointers should be const to make hacks more difficult. Compile tested only. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Shreyas N Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-05xen-netback: make ops structs conststephen hemminger1-2/+2
All tables of function pointers should be const to make hacks more difficult. Compile tested only. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-05virtio_net: Pass gfp flags when allocating rx buffers.Mike Waychison1-1/+2
Currently, the refill path for RX buffers will always allocate the buffers as GFP_ATOMIC, even if we are in process context. This will fail to apply memory pressure as the worker thread will not contribute to the freeing of memory. Fix this by changing add_recvbuf_small to use the gfp variant allocator, __netdev_alloc_skb_ip_align(). Signed-off-by: Mike Waychison <mikew@google.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-05ixgbe: FCoE: Add support for ndo_get_fcoe_hbainfo() callNeerav Parikh3-1/+90
This patch implements support for ndo_get_fcoe_hbainfo() call in the ixgbe driver. This function will be called by the FCoE protocol stack to obtain device specific information from the underlying device configured to do FCoE. Signed-off-by: Neerav Parikh <Neerav.Parikh@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-05netdev: FCoE: Add new ndo_get_fcoe_hbainfo() callNeerav Parikh1-0/+26
This adds a new ndo_get_fcoe_hbainfo() call in net_device_ops for FCoE protocol stack. If supported by the underlying device, the FCoE protocol stack will call this to get device specific information from the underlying device. This information will then be utilized by the FCoE protocol stack to register Fiber Channel HBA attributes with the Fiber Channel Management Service via Fabric Device Management Interface (FDMI) as per the T11 FC-GS specification. Changes in v2: - As per comments from David Miller aligning the parameters of the ndo_get_fcoe_hbainfo() Signed-off-by: Neerav Parikh <Neerav.Parikh@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-05igb: reset PHY after recovering from PHY power downKoki Sanagi1-0/+1
According to 82576_Datasheet.pdf, PHY setting is lost after PHY power down. So resetting PHY is needed when recovering from PHY power down to set a default setting to PHY register. Owing to this lack, NIC doesn't link up in some rare situation. Signed-off-by: Koki Sanagi <sanagi.koki@jp.fujitsu.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-05igb: add basic runtime PM supportYan, Zheng2-19/+133
Use the runtime power management framework to add basic runtime PM support to the igb driver. Namely, make the driver suspend the device when the link is off and set it up for generating a wakeup event after the link has been detected again. This feature is disabled by default. Based on e1000e's runtime PM code. Changes since v1: Don't suspend the device when shutting down the interface. Avoid race between runtime suspending and ethtool operations. Signed-off-by: Zheng Yan <zheng.z.yan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-05igb: Add support for byte queue limits.Eric Dumazet2-0/+10
This adds support for byte queue limits (BQL) Since this driver collects bytes count in 'bytecount' field, use it also in igb_tx_map() Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-05e1000: cleanup CE4100 MDIO registers accessFlorian Fainelli2-12/+7
A global variable is currently used to hold the virtual address of the CE4100 MDIO base register address. Store the address in the e1000_hw structure and update macros accordingly. Signed-off-by: Florian Fainelli <ffainelli@freebox.fr> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-05e1000: unmap ce4100_gbe_mdio_base_virt in e1000_removeFlorian Fainelli1-0/+2
We are not unmapping ce4100_gbe_mdio_base_virt in exit path in case we are running on a CE4100 adapter, fix that. Signed-off-by: Florian Fainelli <ffainelli@freebox.fr> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-05e1000: fix lockdep splat in shutdown handlerJesse Brandeburg1-7/+1
As reported by Steven Rostedt, e1000 has a lockdep splat added during the recent merge window. The issue is that cancel_delayed_work is called while holding our private mutex. There is no reason that I can see to hold the mutex during pci shutdown, it was more just paranoia that I put the mutex_lock around the call to e1000_down. In a quick survey lots of drivers handle locking differently when being called by the pci layer. The assumption here is that we don't need the mutexes' protection in this function because the driver could not be unloaded while in the shutdown handler which is only called at reboot or poweroff. Reported-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Steven Rostedt <rostedt@goodmis.org> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-05max1111.c: fix checkpatch warningFrans Meulenbroeks1-1/+1
Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-01-05hwmon: (lm75) fix checkpatch warningsFrans Meulenbroeks1-3/+2
Fix checkpatch warnings in lm75.h include file Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-01-05hwmon: (lm80) fix checkpatch messagesFrans Meulenbroeks1-28/+42
Fixed all checkpatch messages except simple_strto* -> kstr* This will be addressed in a separate patch Also left one line-too-long message as it was only a little bit too long and would become less readable compile-tested: no warnings or errors Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-01-05hwmon: replaced strict_str* with kstr*Frans Meulenbroeks37-181/+181
replaced strict_strtol with kstrtol and replaced strict_strtuol with kstrtuol This satisfies checkpatch -f Compile tested only: no warnings or errors given Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-01-05hwmon: (lm75) fix checkpatch warningFrans Meulenbroeks1-1/+1
Fixed this: WARNING: strict_strtol is obsolete, use kstrtol instead + error = strict_strtol(buf, 10, &temp); by replacing strict_strtol with kstrtol. Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-01-05hwmon: (lm75) added error handlingFrans Meulenbroeks1-7/+16
Add error handling so if lm75_update_device fails an error is returned when reading the value through sysfs. This is closely modeled after the way this is handled in ltc4261. Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-01-05hwmon: (ltc4261) set data->valid to 0 if errorFrans Meulenbroeks1-0/+1
If there is an error it is better to set data->valid to 0 so the next call to ltc4261_update_device will always be executed. Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-01-05hwmon: (f75375s) Add support for F75387SG/RGBjörn Gerhart2-49/+130
Fintek F75387SG/RG is mostly compatible to F75373/F75375. Add support for it to the F75375S driver. Fan support for F75387SG/RG has been implemented but not tested. Cc: Riku Voipio <riku.voipio@iki.fi> Signed-off-by: Bjoern Gerhart <oss@extracloud.de> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-01-05hwmon: (f75375s) Disable setting DC fan control mode for F75373Guenter Roeck1-0/+4
F75373 does not support DC (linear voltage) fan control mode, so don't let the user set it. Cc: Riku Voipio <riku.voipio@iki.fi> Reviewed-by: Bjoern Gerhart <oss@extracloud.de> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-01-05hwmon: (f75375s) Initialize pwmX_mode and pwmX_enable if there is no ↵Guenter Roeck1-2/+26
platform data pwmX_mode and pwmX_enable are not initialized if no platform data is provided to the driver. Read chip configuration at driver initialization time and initialize attributes to reflect chip configuration. Cc: Riku Voipio <riku.voipio@iki.fi> Reviewed-by: Bjoern Gerhart <oss@extracloud.de> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-01-05hwmon: (f75375s) Fix value range for PWM modesGuenter Roeck1-1/+1
Accepted value range for PWM modes was 0..4, even though only 0..3 is subsequently used. Limit permitted value range to 0..3 to avoid unpredictable behavior. Cc: Riku Voipio <riku.voipio@iki.fi> Reviewed-by: Bjoern Gerhart <oss@extracloud.de> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-01-05hwmon: (f75375s) Use standard sysfs attribute namesGuenter Roeck1-19/+19
The driver uses non-standard sysfs attribute names for maximum and target fan speeds, even though standard attibute names for the same values do exist. Replace non-standard attribute names with standard attribute names. Cc: Riku Voipio <riku.voipio@iki.fi> Reviewed-by: Bjoern Gerhart <oss@extracloud.de> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-01-05hwmon: (f75375s) Fix checkpatch errors and warningsGuenter Roeck1-18/+68
Clean up driver to follow current coding style. Cc: Riku Voipio <riku.voipio@iki.fi> Reviewed-by: Bjoern Gerhart <oss@extracloud.de> Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
2012-01-05hwmon: (pmbus/zl6100) Only instantiate external temperature sensor if enabledGuenter Roeck1-5/+14
BMR4xx devices don't have an external temperature sensor, and instantiating it does not provide value anyway if it is disabled. Only instantiate it if it is enabled. Also optimize wait time between I2C chip accesses in the probe function, and replace unnecessary check for support for I2C_FUNC_SMBUS_READ_BYTE_DATA with now required support for I2C_FUNC_SMBUS_READ_WORD_DATA. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Reviewed-by: Robert Coulson <robert.coulson@ericsson.com>
2012-01-05hwmon: (pmbus/zl6100) Add support for Ericsson BMR45[0,1] and BMR46[2,3,4]Guenter Roeck5-8/+22
Add support for Ericsson BMR450, BMR451, BMR462, BMR463, and BMR464, which are based on ZL2005 and ZL2008, to zl6100 driver. Remove BMR450 and BMR451 device IDs from generic PMBus driver. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Reviewed-by: Robert Coulson <robert.coulson@ericsson.com>
2012-01-05hwmon: (pmbus/zl6100) Add support for ZL2005Guenter Roeck3-4/+23
Add explicit support for ZL2005. Functionality is almost the same as with other Zilker Labs / Intersil chips, but limit register detection does not work reliably. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Reviewed-by: Robert Coulson <robert.coulson@ericsson.com>
2012-01-05hwmon: (pmbus/adm1275) Validate device IDGuenter Roeck1-21/+50
Since manufacturer and device ID are known, read and validate it. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> [Dan Carpenter <dan.carpenter@oracle.com>: Fixed memory leak] Reviewed-by: Robert Coulson <robert.coulson@ericsson.com>
2012-01-05Merge branch 'master' of ↵John W. Linville68-2113/+1178
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: drivers/net/wireless/b43legacy/dma.c
2012-01-05ath6kl: revert USB supportJohn W. Linville8-501/+20
The ath6kl driver is causing build failures when the ath6kl bits are not built as modules. A better fix is forthcoming in a future release, but for now lets revert the problematic code. This reverts the following commits: fde57764ef8751b9aca11b6f6221ac5555bda699 d70385a26ad9a122a5450d066550470107b6bc38 59d954dda4b9b3f3e61d4b87a2b26952b8c4c09d Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-05Merge branch 'restart' into for-linusRussell King592-5513/+3087
Conflicts: arch/arm/mach-exynos/cpu.c The changes to arch/arm/mach-exynos/cpu.c were moved to mach-exynos/common.c.
2012-01-05Merge branch 'devel-stable' into for-linusRussell King433-4076/+3321
Conflicts: arch/arm/kernel/setup.c arch/arm/mach-shmobile/board-kota2.c
2012-01-05Merge branches 'fixes' and 'misc' into for-linusRussell King29-507/+922
2012-01-05ARM: 7267/1: Remove BUILD_BUG_ON from asm/bug.hSimon Glass1-1/+0
BUILD_BUG_ON is defined in linux/kernel.h but that is not included by the asm/bug.h header which uses it. This causes a build error: ...include/linux/mtd/map.h: In function 'inline_map_read': ...include/linux/mtd/map.h:408:3: error: implicit declaration of function 'BUILD_BUG_ON' [-Werror=implicit-function-declaration] The check is not essential and is not present for other architectures, so just remove it. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-05ARM: 7269/1: mach-sa1100: fix sched_clock breakageLinus Walleij1-1/+1
Fixed up a simple typo in the runtime sched_clock conversion so we compile again. Cc: Kristoffer Ericson <kristoffer.ericson@gmail.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-05ARM: 7198/1: arm/imx6: add restart support for imx6qShawn Guo4-3/+58
The restart support was missed from the initial imx6q submission. The mxc_restart() does not work for imx6q. Instead, this patch adds the restart for imx6q. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-05ARM: restart: remove the now empty arch_reset()Russell King56-245/+2
Remove the now empty arch_reset() from all the mach/system.h includes, and remove its callsite. Remove arm_machine_restart() as this function no longer does anything useful. For samsung platforms, remove the include of mach/system-reset.h and plat/system-reset.h from their respective mach/system.h headers as these just define their arch_reset functions. As a result, the s3c2410 and plat-samsung system-reset.h files are no longer referenced, so remove these files entirely. Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Jamie Iles <jamie@jamieiles.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-05ARM: restart: remove comments about adding code to arch_reset()Russell King4-7/+0
arch_reset() is deprecated; systems should hook into system restart via the 'restart' method in the platforms machine description record. Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Jamie Iles <jamie@jamieiles.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-05ARM: restart: lpc32xx & u300: remove unnecessary printkRussell King2-3/+0
Remove the: KERN_CRIT "RESET: Rebooting system\n" (lpc32xx) KERN_CRIT "RESET: shutting down/rebooting system\n" (u300) printk from the restart handler; we already print such a message from kernel_restart() in kernel/sys.c: KERN_EMERG "Restarting system.\n" so this is unnecessary. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-05ARM: restart: plat-samsung: remove plat/reset.h and s5p_reset_hookRussell King2-27/+0
Now that s5p_reset_hook is unused, we can get rid of plat/reset.h and the s5p_reset_hook code in plat/system-reset.h. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-05ARM: restart: w90x900: use new restart hookRussell King6-17/+20
Hook these platforms restart code into the new restart hook rather than using arch_reset(). Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-05ARM: restart: Versatile Express: use new restart hookRussell King1-1/+1
Hook the Versatile Express platform restart code into the new restart hook. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-05ARM: restart: versatile: use new restart hookRussell King6-12/+17
Hook these platforms restart code into the new restart hook rather than using arch_reset(). Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-05ARM: restart: u300: use new restart hookRussell King4-23/+24
Hook these platforms restart code into the new restart hook rather than using arch_reset(). Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-05ARM: restart: tegra: use new restart hookRussell King7-5/+10
Hook these platforms restart code into the new restart hook rather than using arch_reset(). Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-05ARM: restart: spear: use new restart hookRussell King9-12/+36
Hook these platforms restart code into the new restart hook rather than using arch_reset(). Acked-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-05ARM: restart: shark: use new restart hookRussell King2-3/+5
Hook the Shark restart code into the new restart hook rather than using arch_reset(). Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-05ARM: restart: sa1100: use new restart hookRussell King16-9/+25
Hook these platforms restart code into the new restart hook rather than using arch_reset(). Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-05ARM: 7252/1: restart: S5PV210: use new restart hookRussell King7-5/+8
Hook these platforms restart code into the new restart hook rather than using arch_reset(). [kgene.kim@samsung.com: according to local header, updated] Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-01-05ARM: 7251/1: restart: S5PC100: use new restart hookKukjin Kim3-0/+12
Hook these platforms restart code into the new restart hook rather than using arch_reset(). Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-06 01:23:48 +0000