| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Now that we're using a rw_semaphore we no longer need to indicate if a
lock is blocking or not, nor do we need to flip the entire path from
blocking to spinning. Remove these helpers and all the places they are
called.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The context structure unnecessarily stores copy of the checksum size,
that can be now easily obtained from fs_info.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The state structure unnecessarily stores copy of the checksum size, that
can be now easily obtained from fs_info.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Remove local variable that is then used just once and replace it with
fs_info::csum_size.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The fs_info value is 32bit, switch also the local u16 variables. This
leads to a better assembly code generated due to movzwl.
This simple change will shave some bytes on x86_64 and release config:
text data bss dec hex filename
1090000 17980 14912 1122892 11224c pre/btrfs.ko
1089794 17980 14912 1122686 11217e post/btrfs.ko
DELTA: -206
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
btrfs_get_16 shows up in the system performance profiles (helper to read
16bit values from on-disk structures). This is partially because of the
checksum size that's frequently read along with data reads/writes, other
u16 uses are from item size or directory entries.
Replace all calls to btrfs_super_csum_size by the cached value from
fs_info.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
btrfs_csum_bytes_to_leaves shows up in system profiles, which makes it a
candidate for optimizations. After the 64bit division has been replaced
by shift, there's still a calculation done each time the function is
called: checksums per leaf.
As this is a constant value for the entire filesystem lifetime, we
can calculate it once at mount time and reuse. This also allows to
reduce the division to 64bit/32bit as we know the constant will always
fit the 32bit type.
Replace the open-coded rounding up with a macro that internally handles
the 64bit division and as it's now a short function, make it static
inline (slight code increase, slight stack usage reduction).
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
In many places we need the checksum size and it is inefficient to read
it from the raw superblock. Store the value into fs_info, actual use
will be in followup patches. The size is u32 as it allows to generate
better assembly than with u16.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The value of super_block::s_blocksize_bits is the same as
fs_info::sectorsize_bits, but we don't need to do the extra dereferences
in many functions and storing the bits as u32 (in fs_info) generates
shorter assembly.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Change free_space_bitmap_size to take btrfs_fs_info so we can get the
sectorsize_bits to do calculations.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We do a lot of calculations where we divide or multiply by sectorsize.
We also know and make sure that sectorsize is a power of two, so this
means all divisions can be turned to shifts and avoid eg. expensive
u64/u32 divisions.
The type is u32 as it's more register friendly on x86_64 compared to u8
and the resulting assembly is smaller (movzbl vs movl).
There's also superblock s_blocksize_bits but it's usually one more
pointer dereference farther than fs_info.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The variable @page_size in submit_extent_page() is not related to page
size.
It can already be smaller than PAGE_SIZE, so rename it to io_size to
reduce confusion, this is especially important for later subpage
support.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
If we're reading partial page, btrfs will warn about this as read/write
is always done in sector size, which now equals page size.
But for the upcoming subpage read-only support, our data read is only
aligned to sectorsize, which can be smaller than page size.
Thus here we change the warning condition to check it against
sectorsize, the behavior is not changed for regular sectorsize ==
PAGE_SIZE case, and won't report error for subpage read.
Also, pass the proper start/end with bv_offset for check_data_csum() to
handle.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Function process_pages_contig() does not only handle page locking but
also other operations. Rename the local variable pages_locked to
pages_processed to reduce confusion.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
For check_data_csum(), the page we're using is directly from the inode
mapping, thus it has valid page_offset().
We can use (page_offset() + pg_off) to replace @start parameter
completely, while the @len should always be sectorsize.
Since we're here, also add some comment, as there are quite some
confusion in words like start/offset, without explaining whether it's
file_offset or logical bytenr.
This should not affect the existing behavior, as for current sectorsize
== PAGE_SIZE case, @pgoff should always be 0, and len is always
PAGE_SIZE (or sectorsize from the dio read path).
Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
All callers of btrfs_wq_submit_bio() pass struct inode as @private_data,
so there is no need for it to be (void *), replace it with "struct inode
*inode".
While we can extract fs_info from struct inode, also remove the @fs_info
parameter.
Since we're here, also replace all the (void *private_data) into (struct
inode *inode).
Reviewed-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The @failed_start parameter is only paired with @exclusive_bits, and
those parameters are only used for EXTENT_LOCKED bit, which have their
own wrappers lock_extent_bits().
Thus for regular set_extent_bit() calls, the failed_start makes no
sense, just sink the parameter.
Also, since @failed_start and @exclusive_bits are used in pairs, add
an assert to make it obvious.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The pitfall here is, if the parameter @bits has multiple bits set, we
will return the first range which just has one of the specified bits
set.
This is a little tricky if we want an exact match. Anyway, update the
comment to make that clear.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The return value of that function is completely wrong.
That function only returns 0 if the extent buffer doesn't need to be
submitted. The "ret = 1" and "ret = 0" are determined by the return
value of "test_and_clear_bit(EXTENT_BUFFER_DIRTY, &eb->bflags)".
And if we get ret == 1, it's because the extent buffer is dirty, and we
set its status to EXTENT_BUFFER_WRITE_BACK, and continue to page
locking.
While if we get ret == 0, it means the extent is not dirty from the
beginning, so we don't need to write it back.
The caller also follows this, in btree_write_cache_pages(), if
lock_extent_buffer_for_io() returns 0, we just skip the extent buffer
completely.
So the comment is completely wrong.
Since we're here, also change the description a little. The write bio
flushing won't be visible to the caller, thus it's not an major feature.
In the main description, only describe the locking part to make the
point more clear.
For reference, added in commit 2e3c25136adf ("btrfs: extent_io: add
proper error handling to lock_extent_buffer_for_io()")
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Long time ago the explicit casts were necessary for u64 but we don't
need it. Remove casts where the type matches, leaving only cases that
cast sector_t or loff_t.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The drop_level member is used directly unlike all the other int types in
root_item. Add the definition and use it everywhere. The type is u8 so
there's no conversion necessary and the helpers are properly inlined,
this is for consistency.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
For consistency use the available helpers to set flags and limit.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There's one raw use of le->cpu conversion but we have a helper to do
that for us, so use it.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We have helpers to access the on-disk item members, use that for
root_item::ctransid instead of raw le64_to_cpu.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The names in btrfs_lockdep_keysets are generated from a simple pattern
using snprintf but we can generate them directly with some macro magic
and remove the helpers.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
BTRFS_MAX_LEVEL is 8 and the keyset table is supposed to have a key for
each level, but we'll never have more than 8 levels. The values passed
to btrfs_set_buffer_lockdep_class are always derived from a valid extent
buffer. Set the array sizes to the right value.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This effectively reverts 09745ff88d93 ("btrfs: dio iomap DSYNC
workaround") now that the iomap API has been updated to allow
iomap_dio_complete() not to be called under i_rwsem anymore.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
If direct writes are called with O_DIRECT | O_DSYNC, it will result in a
deadlock because iomap_dio_rw() is called under i_rwsem which calls:
iomap_dio_complete()
generic_write_sync()
btrfs_sync_file()
btrfs_sync_file() requires i_rwsem, so call __iomap_dio_rw() with the
i_rwsem locked, and call iomap_dio_complete() after unlocking i_rwsem.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The inode dio_sem can be eliminated because all DIO synchronization is
now performed through inode->i_rwsem that provides the same guarantees.
This reduces btrfs_inode size by 40 bytes.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Direct writes within EOF are safe to be performed with inode shared lock
to improve parallelization with other direct writes or reads because EOF
is not changed and there is no race with truncate().
Direct reads are already performed under shared inode lock.
This patch is precursor to removing btrfs_inode->dio_sem.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Push inode locking and unlocking closer to where we perform the I/O. For
this we need to move the write checks inside the respective functions as
well.
pos is evaluated after generic_write_checks because O_APPEND can change
iocb->ki_pos.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
btrfs_inode_lock/unlock() are wrappers around inode locks, separating
the type of lock and actual locking.
- 0 - default, exclusive lock
- BTRFS_ILOCK_SHARED - for shared locks, for possible parallel DIO
- BTRFS_ILOCK_TRY - for the RWF_NOWAIT sequence
The bits SHARED and TRY can be combined together.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
btrfs_write_check() checks write parameters in one place before
beginning a write. This does away with inode_unlock() after every check.
In the later patches, it will help push inode_lock/unlock() in buffered
and direct write functions respectively.
generic_write_checks needs to be called before as it could truncate
iov_iter and its return used as count.
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
fs_info::fs_state is a filesystem bit check as opposed to inode and can
be performed before we begin with write checks. This eliminates inode
lock/unlock in case the error bit is set.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
While we do this, correct the call to pagecache_isize_extended:
- pagecache_isize_extended needs to be called to the start of the write
as opposed to i_size
- we don't need to check range before the call, this is done in the
function
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The read and write DIO don't have anything in common except for the
call to iomap_dio_rw. Extract the write call into a new function to get
rid of conditional statements for direct write.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Goldwyn Rodrigues <rgoldwyn@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Add
/sys/fs/btrfs/UUID/read_policy
attribute so that the read policy for the raid1, raid1c34 and raid10 can
be tuned.
When this attribute is read, it will show all available policies, with
active policy in [ ]. The read_policy attribute can be written using one
of the items listed in there.
For example:
$ cat /sys/fs/btrfs/UUID/read_policy
[pid]
$ echo pid > /sys/fs/btrfs/UUID/read_policy
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
As of now, we use the pid method to read striped mirrored data, which
means process id determines the stripe id to read. This type of routing
typically helps in a system with many small independent processes tying
to read random data. On the other hand, the pid based read IO policy is
inefficient because if there is a single process trying to read a large
file, the overall disk bandwidth remains underutilized.
So this patch introduces a read policy framework so that we could add
more read policies, such as IO routing based on the device's wait-queue
or manual when we have a read-preferred device or a policy based on the
target storage caching.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Add a generic helper to match the string in a given buffer, and ignore
the leading and trailing whitespace.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ rename variables, add comments ]
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
commit
We do not need anymore to start writeback for delalloc of roots that are
being snapshotted and wait for it to complete. This was done in commit
609e804d771f59 ("Btrfs: fix file corruption after snapshotting due to mix
of buffered/DIO writes") to fix a type of file corruption where files in a
snapshot end up having their i_size updated in a non-ordered way, leaving
implicit file holes, when buffered IO writes that increase a file's size
are followed by direct IO writes that also increase the file's size.
This is not needed anymore because we now have a more generic mechanism
to prevent a non-ordered i_size update since commit 9ddc959e802bf7
("btrfs: use the file extent tree infrastructure"), which addresses this
scenario involving snapshots as well.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Historically we've implemented our own locking because we wanted to be
able to selectively spin or sleep based on what we were doing in the
tree. For instance, if all of our nodes were in cache then there's
rarely a reason to need to sleep waiting for node locks, as they'll
likely become available soon. At the time this code was written the
rw_semaphore didn't do adaptive spinning, and thus was orders of
magnitude slower than our home grown locking.
However now the opposite is the case. There are a few problems with how
we implement blocking locks, namely that we use a normal waitqueue and
simply wake everybody up in reverse sleep order. This leads to some
suboptimal performance behavior, and a lot of context switches in highly
contended cases. The rw_semaphores actually do this properly, and also
have adaptive spinning that works relatively well.
The locking code is also a bit of a bear to understand, and we lose the
benefit of lockdep for the most part because the blocking states of the
lock are simply ad-hoc and not mapped into lockdep.
So rework the locking code to drop all of this custom locking stuff, and
simply use a rw_semaphore for everything. This makes the locking much
simpler for everything, as we can now drop a lot of cruft and blocking
transitions. The performance numbers vary depending on the workload,
because generally speaking there doesn't tend to be a lot of contention
on the btree. However, on my test system which is an 80 core single
socket system with 256GiB of RAM and a 2TiB NVMe drive I get the
following results (with all debug options off):
dbench 200 baseline
Throughput 216.056 MB/sec 200 clients 200 procs max_latency=1471.197 ms
dbench 200 with patch
Throughput 737.188 MB/sec 200 clients 200 procs max_latency=714.346 ms
Previously we also used fs_mark to test this sort of contention, and
those results are far less impressive, mostly because there's not enough
tasks to really stress the locking
fs_mark -d /d[0-15] -S 0 -L 20 -n 100000 -s 0 -t 16
baseline
Average Files/sec: 160166.7
p50 Files/sec: 165832
p90 Files/sec: 123886
p99 Files/sec: 123495
real 3m26.527s
user 2m19.223s
sys 48m21.856s
patched
Average Files/sec: 164135.7
p50 Files/sec: 171095
p90 Files/sec: 122889
p99 Files/sec: 113819
real 3m29.660s
user 2m19.990s
sys 44m12.259s
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Just open code it in its sole caller and remove a level of indirection.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Now that we have the building blocks for some better recovery options
with corrupted file systems, add a rescue=all option to enable all of
the relevant rescue options. This will allow distros to simply default
to rescue=all for the "oh dear lord the world's on fire" recovery
without needing to know all the different options that we have and may
add in the future.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There are cases where you can end up with bad data csums because of
misbehaving applications. This happens when an application modifies a
buffer in-flight when doing an O_DIRECT write. In order to recover the
file we need a way to turn off data checksums so you can copy the file
off, and then you can delete the file and restore it properly later.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
In the face of extent root corruption, or any other core fs wide root
corruption we will fail to mount the file system. This makes recovery
kind of a pain, because you need to fall back to userspace tools to
scrape off data. Instead provide a mechanism to gracefully handle bad
roots, so we can at least mount read-only and possibly recover data from
the file system.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
The standalone option usebackuproot was intended as one-time use and it
was not necessary to keep it in the option list. Now that we're going to
have more rescue options, it's desirable to keep them intact as it could
be confusing why the option disappears.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ remove the btrfs_clear_opt part from open_ctree ]
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We're going to have a lot of rescue options, add a helper to collapse
the /proc/mounts output to rescue=option1:option2:option3 format.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We're going to be adding a variety of different rescue options, we
should advertise which ones we support to make user spaces life easier
in the future.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When we move to being able to handle NULL csum_roots it'll be cleaner to
just check in btrfs_lookup_bio_sums instead of at all of the caller
locations, so push the NODATASUM check into it as well so it's unified.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
We're going to be adding more options that require RDONLY, so add a
helper to do the check and error out if we don't have RDONLY set.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
