summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2014-01-30Merge branch 'akpm' (patches from Andrew Morton)Linus Torvalds29-231/+154
Merge misc fixes from Andrew Morton: "A few hotfixes and various leftovers which were awaiting other merges. Mainly movement of zram into mm/" * emailed patches fron Andrew Morton <akpm@linux-foundation.org>: (25 commits) memcg: fix mutex not unlocked on memcg_create_kmem_cache fail path Documentation/filesystems/vfs.txt: update file_operations documentation mm, oom: base root bonus on current usage mm: don't lose the SOFT_DIRTY flag on mprotect mm/slub.c: fix page->_count corruption (again) mm/mempolicy.c: fix mempolicy printing in numa_maps zram: remove zram->lock in read path and change it with mutex zram: remove workqueue for freeing removed pending slot zram: introduce zram->tb_lock zram: use atomic operation for stat zram: remove unnecessary free zram: delay pending free request in read path zram: fix race between reset and flushing pending work zsmalloc: add maintainers zram: add zram maintainers zsmalloc: add copyright zram: add copyright zram: remove old private project comment zram: promote zram from staging zsmalloc: move it under mm ...
2014-01-30x86, x32: Correct invalid use of user timespec in the kernelPaX Team1-7/+2
The x32 case for the recvmsg() timout handling is broken: asmlinkage long compat_sys_recvmmsg(int fd, struct compat_mmsghdr __user *mmsg, unsigned int vlen, unsigned int flags, struct compat_timespec __user *timeout) { int datagrams; struct timespec ktspec; if (flags & MSG_CMSG_COMPAT) return -EINVAL; if (COMPAT_USE_64BIT_TIME) return __sys_recvmmsg(fd, (struct mmsghdr __user *)mmsg, vlen, flags | MSG_CMSG_COMPAT, (struct timespec *) timeout); ... The timeout pointer parameter is provided by userland (hence the __user annotation) but for x32 syscalls it's simply cast to a kernel pointer and is passed to __sys_recvmmsg which will eventually directly dereference it for both reading and writing. Other callers to __sys_recvmmsg properly copy from userland to the kernel first. The bug was introduced by commit ee4fa23c4bfc ("compat: Use COMPAT_USE_64BIT_TIME in net/compat.c") and should affect all kernels since 3.4 (and perhaps vendor kernels if they backported x32 support along with this code). Note that CONFIG_X86_X32_ABI gets enabled at build time and only if CONFIG_X86_X32 is enabled and ld can build x32 executables. Other uses of COMPAT_USE_64BIT_TIME seem fine. This addresses CVE-2014-0038. Signed-off-by: PaX Team <pageexec@freemail.hu> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: <stable@vger.kernel.org> # v3.4+ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-30Merge branch 'x86-asmlinkage-for-linus' of ↵Linus Torvalds10-34/+37
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 asmlinkage (LTO) changes from Peter Anvin: "This patchset adds more infrastructure for link time optimization (LTO). This patchset was pulled into my tree late because of a miscommunication (part of the patchset was picked up by other maintainers). However, the patchset is strictly build-related and seems to be okay in testing" * 'x86-asmlinkage-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, asmlinkage, xen: Fix type of NMI x86, asmlinkage, xen, kvm: Make {xen,kvm}_lock_spinning global and visible x86: Use inline assembler instead of global register variable to get sp x86, asmlinkage, paravirt: Make paravirt thunks global x86, asmlinkage, paravirt: Don't rely on local assembler labels x86, asmlinkage, lguest: Fix C functions used by inline assembler
2014-01-30Merge branch 'x86-build-for-linus' of ↵Linus Torvalds8-43/+91
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 build bits from Peter Anvin: "Various build-related minor bits. Most of this is work by David Woodhouse to be able to compile the early boot code with clang/llvm; we have also managed to push an actual -m16 option into gcc 4.9 so this makes us use that option if available instead of hacking it. The balance is a patch from Michael Davidson to the relocs program to help manual debugging. None of these should change the actual compiled binary with currently released compilers" * 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, build: Build 16-bit code with -m16 where possible x86, boot: Fix word-size assumptions in has_eflag() inline asm x86, boot: Use __attribute__((used)) to ensure videocard structs are emitted x86: Remove duplication of 16-bit CFLAGS x86, relocs: Add manual debug mode
2014-01-30Merge tag 'late-dt-for-linus' of ↵Linus Torvalds8-12/+310
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC late changes from Kevin Hilman: "These are changes that arrived a little late but were considered self-contained enough to still go in for v3.14. They are all device tree updtes this time around, and mainly for Broadcom SoCs" * tag 'late-dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: moxart: move fixed rate clock child node to board level dts clk: bcm281xx: define kona clock binding ARM: dts: add usb udc support to bcm281xx ARM: dts: Specify clocks for timer on bcm11351 Documentation: dt: kona-timer: Add clocks property ARM: dts: Specify clocks for SDHCIs on bcm11351 Documentation: dt: kona-sdhci: Add clocks property ARM: dts: Specify clocks for UARTs on bcm11351 ARM: dts: bcm281xx: Add i2c busses ARM: dts: Declare clocks as fixed on bcm11351 ARM: dts: bcm28155-ap: Enable all the i2c busses
2014-01-30Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds224-3316/+6635
Pull MIPS updates from Ralf Baechle: "The most notable new addition inside this pull request is the support for MIPS's latest and greatest core called "inter/proAptiv". The patch series describes this core as follows. "The interAptiv is a power-efficient multi-core microprocessor for use in system-on-chip (SoC) applications. The interAptiv combines a multi-threading pipeline with a coherence manager to deliver improved computational throughput and power efficiency. The interAptiv can contain one to four MIPS32R3 interAptiv cores, system level coherence manager with L2 cache, optional coherent I/O port, and optional floating point unit." The platform specific patches touch all 3 Broadcom families. It adds support for the new Broadcom/Netlogix XLP9xx Soc, building a common BCM63XX SMP kernel for all BCM63XX SoCs regardless of core type/count and full gpio button/led descriptions for BCM47xx. The rest of the series are cleanups and bug fixes that are MIPS generic and consist largely of changes that Imgtec/MIPS had published in their linux-mti-3.10.git stable tree. Random other cleanups and patches preparing code to be merged in 3.15" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (139 commits) mips: select ARCH_MIGHT_HAVE_PC_SERIO mips: delete non-required instances of include <linux/init.h> MIPS: KVM: remove shadow_tlb code MIPS: KVM: use common EHINV aware UNIQUE_ENTRYHI mips/ide: flush dcache also if icache does not snoop dcache MIPS: BCM47XX: fix position of cpu_wait disabling MIPS: BCM63XX: select correct MIPS_L1_CACHE_SHIFT value MIPS: update MIPS_L1_CACHE_SHIFT based on MIPS_L1_CACHE_SHIFT_<N> MIPS: introduce MIPS_L1_CACHE_SHIFT_<N> MIPS: ZBOOT: gather string functions into string.c arch/mips/pci: don't check resource with devm_ioremap_resource arch/mips/lantiq/xway: don't check resource with devm_ioremap_resource bcma: gpio: don't cast u32 to unsigned long ssb: gpio: add own IRQ domain MIPS: BCM47XX: fix sparse warnings in board.c MIPS: BCM47XX: add board detection for Linksys WRT54GS V1 MIPS: BCM47XX: fix detection for some boards MIPS: BCM47XX: Enable buttons support on SSB MIPS: BCM47XX: Convert WNDR4500 to new syntax MIPS: BCM47XX: Use "timer" trigger for status LEDs ...
2014-01-30Merge tag 'for-3.14' of git://openrisc.net/~jonas/linuxLinus Torvalds2-143/+149
Pull OpenRISC updates from Jonas Bonn: "The interesting change here is a rework of the OpenRISC signal handling to make it more like other architectures in the hopes that this makes it easier for others to comment on and understand. This rework fixes some real bugs, like the fact that syscall restart did not work reliably" * tag 'for-3.14' of git://openrisc.net/~jonas/linux: openrisc: Use get_signal() signal_setup_done() openrisc: Rework signal handling
2014-01-30Merge branch 'next' of ↵Linus Torvalds46-1196/+2234
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull more powerpc bits from Ben Herrenschmidt: "Here are a few more powerpc bits for this merge window. The bulk is made of two pull requests from Scott and Anatolij that I had missed previously (they arrived while I was away). Since both their branches are in -next independently, and the content has been around for a little while, they can still go in. The rest is mostly bug and regression fixes, a small series of cleanups to our pseries cpuidle code (including moving it to the right place), and one new cpuidle bakend for the powernv platform. I also wired up the new sched_attr syscalls" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (37 commits) powerpc: Wire up sched_setattr and sched_getattr syscalls powerpc/hugetlb: Replace __get_cpu_var with get_cpu_var powerpc: Make sure "cache" directory is removed when offlining cpu powerpc/mm: Fix mmap errno when MAP_FIXED is set and mapping exceeds the allowed address space powerpc/powernv/cpuidle: Back-end cpuidle driver for powernv platform. powerpc/pseries/cpuidle: smt-snooze-delay cleanup. powerpc/pseries/cpuidle: Remove MAX_IDLE_STATE macro. powerpc/pseries/cpuidle: Make cpuidle-pseries backend driver a non-module. powerpc/pseries/cpuidle: Use cpuidle_register() for initialisation. powerpc/pseries/cpuidle: Move processor_idle.c to drivers/cpuidle. powerpc: Fix 32-bit frames for signals delivered when transactional powerpc/iommu: Fix initialisation of DART iommu table powerpc/numa: Fix decimal permissions powerpc/mm: Fix compile error of pgtable-ppc64.h powerpc: Fix hw breakpoints on !HAVE_HW_BREAKPOINT configurations clk: corenet: Adds the clock binding powerpc/booke64: Guard e6500 tlb handler with CONFIG_PPC_FSL_BOOK3E powerpc/512x: dts: add MPC5125 clock specs powerpc/512x: clk: support MPC5121/5123/5125 SoC variants powerpc/512x: clk: enforce even SDHC divider values ...
2014-01-30Merge branch 'drop-time' of ↵Linus Torvalds2-5/+3
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull __TIME__/__DATE__ removal from Michal Marek: "This series by Josh finishes the removal of __DATE__ and __TIME__ from the kernel. The last patch adds -Werror=date-time to KBUILD_CFLAGS to stop these from reappearing. Part of the series went through Greg's trees during this merge window, which is why this pull request is not based on v3.13-rc1" * 'drop-time' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: Makefile: Build with -Werror=date-time if the compiler supports it x86: math-emu: Drop already-disabled print of build date net: wireless: brcm80211: Drop debug version with build date/time mtd: denali: Drop print of build date/time
2014-01-30Merge branch 'kbuild' of ↵Linus Torvalds6-24/+23
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kbuild changes from Michal Marek: - fix make -s detection with make-4.0 - fix for scripts/setlocalversion when the kernel repository is a submodule - do not hardcode ';' in macros that expand to assembler code, as some architectures' assemblers use a different character for newline - Fix passing --gdwarf-2 to the assembler * 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: frv: Remove redundant debugging info flag mn10300: Remove redundant debugging info flag kbuild: Fix debugging info generation for .S files arch: use ASM_NL instead of ';' for assembler new line character in the macro kbuild: Fix silent builds with make-4 Fix detectition of kernel git repository in setlocalversion script [take #2]
2014-01-30memcg: fix mutex not unlocked on memcg_create_kmem_cache fail pathVladimir Davydov1-4/+3
Commit 842e2873697e ("memcg: get rid of kmem_cache_dup()") introduced a mutex for memcg_create_kmem_cache() to protect the tmp_name buffer that holds the memcg name. It failed to unlock the mutex if this buffer could not be allocated. This patch fixes the issue by appropriately unlocking the mutex if the allocation fails. Signed-off-by: Vladimir Davydov <vdavydov@parallels.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Glauber Costa <glommer@parallels.com> Acked-by: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-30Documentation/filesystems/vfs.txt: update file_operations documentationRichard Yao1-10/+2
->readv, ->writev and ->sendfile have been removed while ->show_fdinfo has been added. The documentation should reflect this. Signed-off-by: Richard Yao <ryao@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-30mm, oom: base root bonus on current usageDavid Rientjes2-3/+3
A 3% of system memory bonus is sometimes too excessive in comparison to other processes. With commit a63d83f427fb ("oom: badness heuristic rewrite"), the OOM killer tries to avoid killing privileged tasks by subtracting 3% of overall memory (system or cgroup) from their per-task consumption. But as a result, all root tasks that consume less than 3% of overall memory are considered equal, and so it only takes 33+ privileged tasks pushing the system out of memory for the OOM killer to do something stupid and kill dhclient or other root-owned processes. For example, on a 32G machine it can't tell the difference between the 1M agetty and the 10G fork bomb member. The changelog describes this 3% boost as the equivalent to the global overcommit limit being 3% higher for privileged tasks, but this is not the same as discounting 3% of overall memory from _every privileged task individually_ during OOM selection. Replace the 3% of system memory bonus with a 3% of current memory usage bonus. By giving root tasks a bonus that is proportional to their actual size, they remain comparable even when relatively small. In the example above, the OOM killer will discount the 1M agetty's 256 badness points down to 179, and the 10G fork bomb's 262144 points down to 183500 points and make the right choice, instead of discounting both to 0 and killing agetty because it's first in the task list. Signed-off-by: David Rientjes <rientjes@google.com> Reported-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-30mm: don't lose the SOFT_DIRTY flag on mprotectAndrey Vagin1-1/+2
The SOFT_DIRTY bit shows that the content of memory was changed after a defined point in the past. mprotect() doesn't change the content of memory, so it must not change the SOFT_DIRTY bit. This bug causes a malfunction: on the first iteration all pages are dumped. On other iterations only pages with the SOFT_DIRTY bit are dumped. So if the SOFT_DIRTY bit is cleared from a page by mistake, the page is not dumped and its content will be restored incorrectly. This patch does nothing with _PAGE_SWP_SOFT_DIRTY, becase pte_modify() is called only for present pages. Fixes commit 0f8975ec4db2 ("mm: soft-dirty bits for user memory changes tracking"). Signed-off-by: Andrey Vagin <avagin@openvz.org> Acked-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Borislav Petkov <bp@suse.de> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-30mm/slub.c: fix page->_count corruption (again)Dave Hansen1-2/+17
Commit abca7c496584 ("mm: fix slab->page _count corruption when using slub") notes that we can not _set_ a page->counters directly, except when using a real double-cmpxchg. Doing so can lose updates to ->_count. That is an absolute rule: You may not *set* page->counters except via a cmpxchg. Commit abca7c496584 fixed this for the folks who have the slub cmpxchg_double code turned off at compile time, but it left the bad case alone. It can still be reached, and the same bug triggered in two cases: 1. Turning on slub debugging at runtime, which is available on the distro kernels that I looked at. 2. On 64-bit CPUs with no CMPXCHG16B (some early AMD x86-64 cpus, evidently) There are at least 3 ways we could fix this: 1. Take all of the exising calls to cmpxchg_double_slab() and __cmpxchg_double_slab() and convert them to take an old, new and target 'struct page'. 2. Do (1), but with the newly-introduced 'slub_data'. 3. Do some magic inside the two cmpxchg...slab() functions to pull the counters out of new_counters and only set those fields in page->{inuse,frozen,objects}. I've done (2) as well, but it's a bunch more code. This patch is an attempt at (3). This was the most straightforward and foolproof way that I could think to do this. This would also technically allow us to get rid of the ugly #if defined(CONFIG_HAVE_CMPXCHG_DOUBLE) && \ defined(CONFIG_HAVE_ALIGNED_STRUCT_PAGE) in 'struct page', but leaving it alone has the added benefit that 'counters' stays 'unsigned' instead of 'unsigned long', so all the copies that the slub code does stay a bit smaller. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Matt Mackall <mpm@selenic.com> Cc: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-30mm/mempolicy.c: fix mempolicy printing in numa_mapsDavid Rientjes1-1/+1
As a result of commit 5606e3877ad8 ("mm: numa: Migrate on reference policy"), /proc/<pid>/numa_maps prints the mempolicy for any <pid> as "prefer:N" for the local node, N, of the process reading the file. This should only be printed when the mempolicy of <pid> is MPOL_PREFERRED for node N. If the process is actually only using the default mempolicy for local node allocation, make sure "default" is printed as expected. Signed-off-by: David Rientjes <rientjes@google.com> Reported-by: Robert Lippert <rlippert@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Acked-by: Mel Gorman <mgorman@suse.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: <stable@vger.kernel.org> [3.7+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-30zram: remove zram->lock in read path and change it with mutexMinchan Kim2-12/+9
Finally, we separated zram->lock dependency from 32bit stat/ table handling so there is no reason to use rw_semaphore between read and write path so this patch removes the lock from read path totally and changes rw_semaphore with mutex. So, we could do old: read-read: OK read-write: NO write-write: NO Now: read-read: OK read-write: OK write-write: NO The below data proves mixed workload performs well 11 times and there is also enhance on write-write path because current rw-semaphore doesn't support SPIN_ON_OWNER. It's side effect but anyway good thing for us. Write-related tests perform better (from 61% to 1058%) but read path has good/bad(from -2.22% to 1.45%) but they are all marginal within stddev. CPU 12 iozone -t -T -l 12 -u 12 -r 16K -s 60M -I +Z -V 0 ==Initial write ==Initial write records: 10 records: 10 avg: 516189.16 avg: 839907.96 std: 22486.53 (4.36%) std: 47902.17 (5.70%) max: 546970.60 max: 909910.35 min: 481131.54 min: 751148.38 ==Rewrite ==Rewrite records: 10 records: 10 avg: 509527.98 avg: 1050156.37 std: 45799.94 (8.99%) std: 40695.44 (3.88%) max: 611574.27 max: 1111929.26 min: 443679.95 min: 980409.62 ==Read ==Read records: 10 records: 10 avg: 4408624.17 avg: 4472546.76 std: 281152.61 (6.38%) std: 163662.78 (3.66%) max: 4867888.66 max: 4727351.03 min: 4058347.69 min: 4126520.88 ==Re-read ==Re-read records: 10 records: 10 avg: 4462147.53 avg: 4363257.75 std: 283546.11 (6.35%) std: 247292.63 (5.67%) max: 4912894.44 max: 4677241.75 min: 4131386.50 min: 4035235.84 ==Reverse Read ==Reverse Read records: 10 records: 10 avg: 4565865.97 avg: 4485818.08 std: 313395.63 (6.86%) std: 248470.10 (5.54%) max: 5232749.16 max: 4789749.94 min: 4185809.62 min: 3963081.34 ==Stride read ==Stride read records: 10 records: 10 avg: 4515981.80 avg: 4418806.01 std: 211192.32 (4.68%) std: 212837.97 (4.82%) max: 4889287.28 max: 4686967.22 min: 4210362.00 min: 4083041.84 ==Random read ==Random read records: 10 records: 10 avg: 4410525.23 avg: 4387093.18 std: 236693.22 (5.37%) std: 235285.23 (5.36%) max: 4713698.47 max: 4669760.62 min: 4057163.62 min: 3952002.16 ==Mixed workload ==Mixed workload records: 10 records: 10 avg: 243234.25 avg: 2818677.27 std: 28505.07 (11.72%) std: 195569.70 (6.94%) max: 288905.23 max: 3126478.11 min: 212473.16 min: 2484150.69 ==Random write ==Random write records: 10 records: 10 avg: 555887.07 avg: 1053057.79 std: 70841.98 (12.74%) std: 35195.36 (3.34%) max: 683188.28 max: 1096125.73 min: 437299.57 min: 992481.93 ==Pwrite ==Pwrite records: 10 records: 10 avg: 501745.93 avg: 810363.09 std: 16373.54 (3.26%) std: 19245.01 (2.37%) max: 518724.52 max: 833359.70 min: 464208.73 min: 765501.87 ==Pread ==Pread records: 10 records: 10 avg: 4539894.60 avg: 4457680.58 std: 197094.66 (4.34%) std: 188965.60 (4.24%) max: 4877170.38 max: 4689905.53 min: 4226326.03 min: 4095739.72 Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Tested-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Jerome Marchand <jmarchan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-30zram: remove workqueue for freeing removed pending slotMinchan Kim2-58/+6
Commit a0c516cbfc74 ("zram: don't grab mutex in zram_slot_free_noity") introduced free request pending code to avoid scheduling by mutex under spinlock and it was a mess which made code lenghty and increased overhead. Now, we don't need zram->lock any more to free slot so this patch reverts it and then, tb_lock should protect it. Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Tested-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Jerome Marchand <jmarchan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-30zram: introduce zram->tb_lockMinchan Kim2-6/+23
Currently, the zram table is protected by zram->lock but it's rather coarse-grained lock and it makes hard for scalibility. Let's use own rwlock instead of depending on zram->lock. This patch adds new locking so obviously, it would make slow but this patch is just prepartion for removing coarse-grained rw_semaphore(ie, zram->lock) which is hurdle about zram scalability. Final patch in this patchset series will remove the lock from read-path and change rw_semaphore with mutex in write path. With bonus, we could drop pending slot free mess in next patch. Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Tested-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Jerome Marchand <jmarchan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-30zram: use atomic operation for statMinchan Kim2-20/+16
Some of fields in zram->stats are protected by zram->lock which is rather coarse-grained so let's use atomic operation without explict locking. This patch is ready for removing dependency of zram->lock in read path which is very coarse-grained rw_semaphore. Of course, this patch adds new atomic operation so it might make slow but my 12CPU test couldn't spot any regression. All gain/lose is marginal within stddev. iozone -t -T -l 12 -u 12 -r 16K -s 60M -I +Z -V 0 ==Initial write ==Initial write records: 50 records: 50 avg: 412875.17 avg: 415638.23 std: 38543.12 (9.34%) std: 36601.11 (8.81%) max: 521262.03 max: 502976.72 min: 343263.13 min: 351389.12 ==Rewrite ==Rewrite records: 50 records: 50 avg: 416640.34 avg: 397914.33 std: 60798.92 (14.59%) std: 46150.42 (11.60%) max: 543057.07 max: 522669.17 min: 304071.67 min: 316588.77 ==Read ==Read records: 50 records: 50 avg: 4147338.63 avg: 4070736.51 std: 179333.25 (4.32%) std: 223499.89 (5.49%) max: 4459295.28 max: 4539514.44 min: 3753057.53 min: 3444686.31 ==Re-read ==Re-read records: 50 records: 50 avg: 4096706.71 avg: 4117218.57 std: 229735.04 (5.61%) std: 171676.25 (4.17%) max: 4430012.09 max: 4459263.94 min: 2987217.80 min: 3666904.28 ==Reverse Read ==Reverse Read records: 50 records: 50 avg: 4062763.83 avg: 4078508.32 std: 186208.46 (4.58%) std: 172684.34 (4.23%) max: 4401358.78 max: 4424757.22 min: 3381625.00 min: 3679359.94 ==Stride read ==Stride read records: 50 records: 50 avg: 4094933.49 avg: 4082170.22 std: 185710.52 (4.54%) std: 196346.68 (4.81%) max: 4478241.25 max: 4460060.97 min: 3732593.23 min: 3584125.78 ==Random read ==Random read records: 50 records: 50 avg: 4031070.04 avg: 4074847.49 std: 192065.51 (4.76%) std: 206911.33 (5.08%) max: 4356931.16 max: 4399442.56 min: 3481619.62 min: 3548372.44 ==Mixed workload ==Mixed workload records: 50 records: 50 avg: 149925.73 avg: 149675.54 std: 7701.26 (5.14%) std: 6902.09 (4.61%) max: 191301.56 max: 175162.05 min: 133566.28 min: 137762.87 ==Random write ==Random write records: 50 records: 50 avg: 404050.11 avg: 393021.47 std: 58887.57 (14.57%) std: 42813.70 (10.89%) max: 601798.09 max: 524533.43 min: 325176.99 min: 313255.34 ==Pwrite ==Pwrite records: 50 records: 50 avg: 411217.70 avg: 411237.96 std: 43114.99 (10.48%) std: 33136.29 (8.06%) max: 530766.79 max: 471899.76 min: 320786.84 min: 317906.94 ==Pread ==Pread records: 50 records: 50 avg: 4154908.65 avg: 4087121.92 std: 151272.08 (3.64%) std: 219505.04 (5.37%) max: 4459478.12 max: 4435857.38 min: 3730512.41 min: 3101101.67 Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Tested-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Jerome Marchand <jmarchan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-30zram: remove unnecessary freeMinchan Kim1-8/+0
Commit a0c516cbfc74 ("zram: don't grab mutex in zram_slot_free_noity") introduced pending zram slot free in zram's write path in case of missing slot free by memory allocation failure in zram_slot_free_notify but it is not necessary because we have already freed the slot right before overwriting. Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Tested-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-30zram: delay pending free request in read pathMinchan Kim1-1/+0
Sergey reported we don't need to handle pending free request every I/O so that this patch removes it in read path while we remain it in write path. Let's consider below example. Swap subsystem ask to zram "A" block free by swap_slot_free_notify but zram had been pended it without real freeing. Swap subsystem allocates "A" block for new data but request pended for a long time just handled and zram blindly free new data on the "A" block. :( That's why we couldn't remove handle pending free request right before zram-write. Signed-off-by: Minchan Kim <minchan@kernel.org> Reported-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Tested-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-30zram: fix race between reset and flushing pending workMinchan Kim1-2/+2
Dan and Sergey reported that there is a racy between reset and flushing of pending work so that it could make oops by freeing zram->meta in reset while zram_slot_free can access zram->meta if new request is adding during the race window. This patch moves flush after taking init_lock so it prevents new request so that it closes the race. Signed-off-by: Minchan Kim <minchan@kernel.org> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Jerome Marchand <jmarchan@redhat.com> Tested-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-30zsmalloc: add maintainersMinchan Kim1-0/+8
tAdd adds maintainer information for zsmalloc into the MAINTAINERS file. Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-30zram: add zram maintainersMinchan Kim1-0/+8
Add maintainer information for zram into the MAINTAINERS file. Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-30zsmalloc: add copyrightMinchan Kim2-0/+2
Add my copyright to the zsmalloc source code which I maintain. Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-30zram: add copyrightMinchan Kim2-0/+2
Add my copyright to the zram source code which I maintain. Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-30zram: remove old private project commentMinchan Kim4-9/+0
Remove the old private compcache project address so upcoming patches should be sent to LKML because we Linux kernel community will take care. Signed-off-by: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-30zram: promote zram from stagingMinchan Kim9-3/+3
Zram has lived in staging for a LONG LONG time and have been fixed/improved by many contributors so code is clean and stable now. Of course, there are lots of product using zram in real practice. The major TV companys have used zram as swap since two years ago and recently our production team released android smart phone with zram which is used as swap, too and recently Android Kitkat start to use zram for small memory smart phone. And there was a report Google released their ChromeOS with zram, too and cyanogenmod have been used zram long time ago. And I heard some disto have used zram block device for tmpfs. In addition, I saw many report from many other peoples. For example, Lubuntu start to use it. The benefit of zram is very clear. With my experience, one of the benefit was to remove jitter of video application with backgroud memory pressure. It would be effect of efficient memory usage by compression but more issue is whether swap is there or not in the system. Recent mobile platforms have used JAVA so there are many anonymous pages. But embedded system normally are reluctant to use eMMC or SDCard as swap because there is wear-leveling and latency issues so if we do not use swap, it means we can't reclaim anoymous pages and at last, we could encounter OOM kill. :( Although we have real storage as swap, it was a problem, too. Because it sometime ends up making system very unresponsible caused by slow swap storage performance. Quote from Luigi on Google "Since Chrome OS was mentioned: the main reason why we don't use swap to a disk (rotating or SSD) is because it doesn't degrade gracefully and leads to a bad interactive experience. Generally we prefer to manage RAM at a higher level, by transparently killing and restarting processes. But we noticed that zram is fast enough to be competitive with the latter, and it lets us make more efficient use of the available RAM. " and he announced. http://www.spinics.net/lists/linux-mm/msg57717.html Other uses case is to use zram for block device. Zram is block device so anyone can format the block device and mount on it so some guys on the internet start zram as /var/tmp. http://forums.gentoo.org/viewtopic-t-838198-start-0.html Let's promote zram and enhance/maintain it instead of removing. Signed-off-by: Minchan Kim <minchan@kernel.org> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Nitin Gupta <ngupta@vflare.org> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: Bob Liu <bob.liu@oracle.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hugh Dickins <hughd@google.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Luigi Semenzato <semenzato@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Seth Jennings <sjenning@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-30zsmalloc: move it under mmMinchan Kim9-34/+28
This patch moves zsmalloc under mm directory. Before that, description will explain why we have needed custom allocator. Zsmalloc is a new slab-based memory allocator for storing compressed pages. It is designed for low fragmentation and high allocation success rate on large object, but <= PAGE_SIZE allocations. zsmalloc differs from the kernel slab allocator in two primary ways to achieve these design goals. zsmalloc never requires high order page allocations to back slabs, or "size classes" in zsmalloc terms. Instead it allows multiple single-order pages to be stitched together into a "zspage" which backs the slab. This allows for higher allocation success rate under memory pressure. Also, zsmalloc allows objects to span page boundaries within the zspage. This allows for lower fragmentation than could be had with the kernel slab allocator for objects between PAGE_SIZE/2 and PAGE_SIZE. With the kernel slab allocator, if a page compresses to 60% of it original size, the memory savings gained through compression is lost in fragmentation because another object of the same size can't be stored in the leftover space. This ability to span pages results in zsmalloc allocations not being directly addressable by the user. The user is given an non-dereferencable handle in response to an allocation request. That handle must be mapped, using zs_map_object(), which returns a pointer to the mapped region that can be used. The mapping is necessary since the object data may reside in two different noncontigious pages. The zsmalloc fulfills the allocation needs for zram perfectly [sjenning@linux.vnet.ibm.com: borrow Seth's quote] Signed-off-by: Minchan Kim <minchan@kernel.org> Acked-by: Nitin Gupta <ngupta@vflare.org> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Bob Liu <bob.liu@oracle.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hugh Dickins <hughd@google.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Luigi Semenzato <semenzato@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Pekka Enberg <penberg@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Seth Jennings <sjenning@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-30kernel/smp.c: remove cpumask_ipiRoman Gushchin1-16/+1
After commit 9a46ad6d6df3 ("smp: make smp_call_function_many() use logic similar to smp_call_function_single()"), cfd->cpumask is accessed only in smp_call_function_many(). So there is no more need to copy it into cfd->cpumask_ipi before putting csd into the list. The cpumask_ipi field is obsolete and can be removed. Signed-off-by: Roman Gushchin <klamm@yandex-team.ru> Cc: Ingo Molnar <mingo@kernel.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Wang YanQing <udknight@gmail.com> Cc: Xie XiuQi <xiexiuqi@huawei.com> Cc: Shaohua Li <shli@fusionio.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-30kernel: use lockless list for smp_call_function_singleChristoph Hellwig3-43/+19
Make smp_call_function_single and friends more efficient by using a lockless list. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-30drivers/net/phy/mdio_bus.c: call put_device on device_register() failureLevente Kurusa1-0/+1
It is required to call put_device() if device_register() fails, so that we give up the last reference to the device. Calling put_device allows for mdiobus_release to be executed, kfreeing the bus. Signed-off-by: Levente Kurusa <levex@linux.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: David Daney <david.daney@cavium.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-30drivers/video/backlight/lcd.c: call put_device if device_register failsLevente Kurusa1-1/+1
Currently we kfree the container of the device which failed to register. This is wrong as the last reference is not given up with a put_device call. Also, now that we have put_device() callen, we no longer need the kfree as the new_ld->dev.release function will take care of kfreeing the associated memory. Signed-off-by: Levente Kurusa <levex@linux.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-30memblock, bootmem: restore goal for alloc_lowYinghai Lu1-2/+2
Now we have memblock_virt_alloc_low to replace original bootmem api in swiotlb. But we should not use BOOTMEM_LOW_LIMIT for arch that does not support CONFIG_NOBOOTMEM, as old api take 0. | #define alloc_bootmem_low(x) \ | __alloc_bootmem_low(x, SMP_CACHE_BYTES, 0) |#define alloc_bootmem_low_pages_nopanic(x) \ | __alloc_bootmem_low_nopanic(x, PAGE_SIZE, 0) and we have #define BOOTMEM_LOW_LIMIT __pa(MAX_DMA_ADDRESS) for CONFIG_NOBOOTMEM. Restore goal to 0 to fix ia64 crash, that Tony found. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Reported-by: Tony Luck <tony.luck@gmail.com> Tested-by: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-30Merge branch 'for-3.14/drivers' of git://git.kernel.dk/linux-blockLinus Torvalds39-1895/+2435
Pull block IO driver changes from Jens Axboe: - bcache update from Kent Overstreet. - two bcache fixes from Nicholas Swenson. - cciss pci init error fix from Andrew. - underflow fix in the parallel IDE pg_write code from Dan Carpenter. I'm sure the 1 (or 0) users of that are now happy. - two PCI related fixes for sx8 from Jingoo Han. - floppy init fix for first block read from Jiri Kosina. - pktcdvd error return miss fix from Julia Lawall. - removal of IRQF_SHARED from the SEGA Dreamcast CD-ROM code from Michael Opdenacker. - comment typo fix for the loop driver from Olaf Hering. - potential oops fix for null_blk from Raghavendra K T. - two fixes from Sam Bradshaw (Micron) for the mtip32xx driver, fixing an OOM problem and a problem with handling security locked conditions * 'for-3.14/drivers' of git://git.kernel.dk/linux-block: (47 commits) mg_disk: Spelling s/finised/finished/ null_blk: Null pointer deference problem in alloc_page_buffers mtip32xx: Correctly handle security locked condition mtip32xx: Make SGL container per-command to eliminate high order dma allocation drivers/block/loop.c: fix comment typo in loop_config_discard drivers/block/cciss.c:cciss_init_one(): use proper errnos drivers/block/paride/pg.c: underflow bug in pg_write() drivers/block/sx8.c: remove unnecessary pci_set_drvdata() drivers/block/sx8.c: use module_pci_driver() floppy: bail out in open() if drive is not responding to block0 read bcache: Fix auxiliary search trees for key size > cacheline size bcache: Don't return -EINTR when insert finished bcache: Improve bucket_prio() calculation bcache: Add bch_bkey_equal_header() bcache: update bch_bkey_try_merge bcache: Move insert_fixup() to btree_keys_ops bcache: Convert sorting to btree_keys bcache: Convert debug code to btree_keys bcache: Convert btree_iter to struct btree_keys bcache: Refactor bset_tree sysfs stats ...
2014-01-30Merge branch 'for-3.14/core' of git://git.kernel.dk/linux-blockLinus Torvalds139-2683/+2144
Pull core block IO changes from Jens Axboe: "The major piece in here is the immutable bio_ve series from Kent, the rest is fairly minor. It was supposed to go in last round, but various issues pushed it to this release instead. The pull request contains: - Various smaller blk-mq fixes from different folks. Nothing major here, just minor fixes and cleanups. - Fix for a memory leak in the error path in the block ioctl code from Christian Engelmayer. - Header export fix from CaiZhiyong. - Finally the immutable biovec changes from Kent Overstreet. This enables some nice future work on making arbitrarily sized bios possible, and splitting more efficient. Related fixes to immutable bio_vecs: - dm-cache immutable fixup from Mike Snitzer. - btrfs immutable fixup from Muthu Kumar. - bio-integrity fix from Nic Bellinger, which is also going to stable" * 'for-3.14/core' of git://git.kernel.dk/linux-block: (44 commits) xtensa: fixup simdisk driver to work with immutable bio_vecs block/blk-mq-cpu.c: use hotcpu_notifier() blk-mq: for_each_* macro correctness block: Fix memory leak in rw_copy_check_uvector() handling bio-integrity: Fix bio_integrity_verify segment start bug block: remove unrelated header files and export symbol blk-mq: uses page->list incorrectly blk-mq: use __smp_call_function_single directly btrfs: fix missing increment of bi_remaining Revert "block: Warn and free bio if bi_end_io is not set" block: Warn and free bio if bi_end_io is not set blk-mq: fix initializing request's start time block: blk-mq: don't export blk_mq_free_queue() block: blk-mq: make blk_sync_queue support mq block: blk-mq: support draining mq queue dm cache: increment bi_remaining when bi_end_io is restored block: fixup for generic bio chaining block: Really silence spurious compiler warnings block: Silence spurious compiler warnings block: Kill bio_pair_split() ...
2014-01-30Merge branch 'for-3.14' of git://linux-nfs.org/~bfields/linuxLinus Torvalds26-393/+284
Pull nfsd updates from Bruce Fields: - Handle some loose ends from the vfs read delegation support. (For example nfsd can stop breaking leases on its own in a fewer places where it can now depend on the vfs to.) - Make life a little easier for NFSv4-only configurations (thanks to Kinglong Mee). - Fix some gss-proxy problems (thanks Jeff Layton). - miscellaneous bug fixes and cleanup * 'for-3.14' of git://linux-nfs.org/~bfields/linux: (38 commits) nfsd: consider CLAIM_FH when handing out delegation nfsd4: fix delegation-unlink/rename race nfsd4: delay setting current_fh in open nfsd4: minor nfs4_setlease cleanup gss_krb5: use lcm from kernel lib nfsd4: decrease nfsd4_encode_fattr stack usage nfsd: fix encode_entryplus_baggage stack usage nfsd4: simplify xdr encoding of nfsv4 names nfsd4: encode_rdattr_error cleanup nfsd4: nfsd4_encode_fattr cleanup minor svcauth_gss.c cleanup nfsd4: better VERIFY comment nfsd4: break only delegations when appropriate NFSD: Fix a memory leak in nfsd4_create_session sunrpc: get rid of use_gssp_lock sunrpc: fix potential race between setting use_gss_proxy and the upcall rpc_clnt sunrpc: don't wait for write before allowing reads from use-gss-proxy file nfsd: get rid of unused function definition Define op_iattr for nfsd4_open instead using macro NFSD: fix compile warning without CONFIG_NFSD_V3 ...
2014-01-30ipmi: Add missing rv in ipmi_parisc_probe()Geert Uytterhoeven1-0/+1
Fix drivers/char/ipmi/ipmi_si_intf.c: In function 'ipmi_parisc_probe': drivers/char/ipmi/ipmi_si_intf.c:2752:2: error: 'rv' undeclared (first use in this function) drivers/char/ipmi/ipmi_si_intf.c:2752:2: note: each undeclared identifier is reported only once for each function it appears in Introduced by commit d02b3709ff8e ("ipmi: Cleanup error return") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-30nfs: fix xattr inode op pointers when disabledChristoph Hellwig1-2/+2
Chris Mason reported a NULL pointer derefernence in generic_getxattr() that was due to sb->s_xattr being NULL. The reason is that the nfs #ifdef's for ACL support were misplaced, and the nfs3 inode operations had the xattr operation pointers set up, even though xattrs were not actually supported. As a result, the xattr code was being called without the infrastructure having been set up. Move the #ifdef's appropriately. Reported-and-tested-by: Chris Mason <clm@fb.com> Acked-by: Al Viro viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-30x86, build: Build 16-bit code with -m16 where possibleDavid Woodhouse1-4/+12
Both clang 3.5 and GCC 4.9 will support this (as of r199754 and r207196 respectively). Both have been tested to produce booting kernels when the 16-bit code is built with -m16. (Modulo LLVM PR3997, at least.) [ hpa: folded test for -m16 into M16_CFLAGS ] Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Link: http://lkml.kernel.org/r/1390997807.20153.133.camel@i7.infradead.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-01-30x86, boot: Fix word-size assumptions in has_eflag() inline asmDavid Woodhouse1-5/+20
Commit dd78b97367bd575918204cc89107c1479d3fc1a7 ("x86, boot: Move CPU flags out of cpucheck") introduced ambiguous inline asm in the has_eflag() function. In 16-bit mode want the instruction to be 'pushfl', but we just say 'pushf' and hope the compiler does what we wanted. When building with 'clang -m16', it won't, because clang doesn't use the horrid '.code16gcc' hack that even 'gcc -m16' uses internally. Say what we mean and don't make the compiler make assumptions. [ hpa: ideally we would be able to use the gcc %zN construct here, but that is broken for 64-bit integers in gcc < 4.5. The code with plain "pushf/popf" is fine for 32- or 64-bit mode, but not for 16-bit mode; in 16-bit mode those are 16-bit instructions in .code16 mode, and 32-bit instructions in .code16gcc mode. ] Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Link: http://lkml.kernel.org/r/1391079628.26079.82.camel@shinybook.infradead.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-01-29x86, asmlinkage, xen: Fix type of NMIAndi Kleen1-2/+2
LTO requires consistent types of symbols over all files. So "nmi" cannot be declared as a char [] here, need to use the correct function type. Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/1382458079-24450-8-git-send-email-andi@firstfloor.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-01-29x86, asmlinkage, xen, kvm: Make {xen,kvm}_lock_spinning global and visibleAndi Kleen2-2/+2
These functions are called from inline assembler stubs, thus need to be global and visible. Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/1382458079-24450-7-git-send-email-andi@firstfloor.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-01-29x86: Use inline assembler instead of global register variable to get spAndi Kleen1-3/+5
LTO in gcc 4.6/47. has trouble with global register variables. They were used to read the stack pointer. Use a simple inline assembler statement with a mov instead. This also helps LLVM/clang, which does not support global register variables. [ hpa: Ideally this should become a builtin in both gcc and clang. ] v2: More general asm constraint. Fix description (Jan Beulich) Signed-off-by: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/1382458079-24450-6-git-send-email-andi@firstfloor.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-01-29x86, asmlinkage, paravirt: Make paravirt thunks globalAndi Kleen4-17/+17
The paravirt thunks use a hack of using a static reference to a static function to reference that function from the top level statement. This assumes that gcc always generates static function names in a specific format, which is not necessarily true. Simply make these functions global and asmlinkage or __visible. This way the static __used variables are not needed and everything works. Functions with arguments are __visible to keep the register calling convention on 32bit. Changed in paravirt and in all users (Xen and vsmp) v2: Use __visible for functions with arguments Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Ido Yariv <ido@wizery.com> Signed-off-by: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/1382458079-24450-5-git-send-email-andi@firstfloor.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-01-29x86, asmlinkage, paravirt: Don't rely on local assembler labelsAndi Kleen1-4/+5
The paravirt patching code assumes that it can reference a local assembler label between two different top level assembler statements. This does not work with LTO where the assembler code may end up in different assembler files. Replace it with extern / global /asm linkage labels. This also removes one redundant copy of the macro. Cc: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/1382458079-24450-4-git-send-email-andi@firstfloor.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-01-29x86, asmlinkage, lguest: Fix C functions used by inline assemblerAndi Kleen1-6/+6
- Make the C code used by the paravirt stubs visible - Since they have to be global now, give them a more unique name. Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/1382458079-24450-3-git-send-email-andi@firstfloor.org Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2014-01-29Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds512-11882/+35535
Pull drm updates from Dave Airlie: "Been a bit busy, first week of kids school, and waiting on other trees to go in before I could send this, so its a bit later than I'd normally like. Highlights: - core: timestamp fixes, lots of misc cleanups - new drivers: bochs virtual vga - vmwgfx: major overhaul for their nextgen virt gpu. - i915: runtime D3 on HSW, watermark fixes, power well work, fbc fixes, bdw is no longer prelim. - nouveau: gk110/208 acceleration, more pm groundwork, old overlay support - radeon: dpm rework and clockgating for CIK, pci config reset, big endian fixes - tegra: panel support and DSI support, build as module, prime. - armada, omap, gma500, rcar, exynos, mgag200, cirrus, ast: fixes - msm: hdmi support for mdp5" * 'drm-next' of git://people.freedesktop.org/~airlied/linux: (595 commits) drm/nouveau: resume display if any later suspend bits fail drm/nouveau: fix lock unbalance in nouveau_crtc_page_flip drm/nouveau: implement hooks for needed for drm vblank timestamping support drm/nouveau/disp: add a method to fetch info needed by drm vblank timestamping drm/nv50: fill in crtc mode struct members from crtc_mode_fixup drm/radeon/dce8: workaround for atom BlankCrtc table drm/radeon/DCE4+: clear bios scratch dpms bit (v2) drm/radeon: set si_notify_smc_display_change properly drm/radeon: fix DAC interrupt handling on DCE5+ drm/radeon: clean up active vram sizing drm/radeon: skip async dma init on r6xx drm/radeon/runpm: don't runtime suspend non-PX cards drm/radeon: add ring to fence trace functions drm/radeon: add missing trace point drm/radeon: fix VMID use tracking drm: ast,cirrus,mgag200: use drm_can_sleep drm/gma500: Lock struct_mutex around cursor updates drm/i915: Fix the offset issue for the stolen GEM objects DRM: armada: fix missing DRM_KMS_FB_HELPER select drm/i915: Decouple GPU error reporting from ring initialisation ...
2014-01-29Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds30-202/+1885
Pull slave-dma updates from Vinod Koul: - new driver for BCM2835 used in R-pi - new driver for MOXA ART - dma_get_any_slave_channel API for DT based systems - minor fixes and updates spread acrooss driver [ The fsl-ssi dual fifo mode support addition clashed badly with the other changes to fsl-ssi that came in through the sound merge. I did a very rough cut at fixing up the conflict, but Nicolin Chen (author of both sides) will need to verify and check things ] * 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (36 commits) dmaengine: mmp_pdma: fix mismerge dma: pl08x: Export pl08x_filter_id acpi-dma: align documentation with kernel-doc format dma: fix vchan_cookie_complete() debug print DMA: dmatest: extend the "device" module parameter to 32 characters drivers/dma: fix error return code dma: omap: Set debug level to debugging messages dmaengine: fix kernel-doc style typos for few comments dma: tegra: add support for Tegra148/124 dma: dw: use %pad instead of casting dma_addr_t dma: dw: join split up messages dma: dw: fix style of multiline comment dmaengine: k3dma: fix sparse warnings dma: pl330: Use dma_get_slave_channel() in the of xlate callback dma: pl330: Differentiate between submitted and issued descriptors dmaengine: sirf: Add device_slave_caps interface DMA: Freescale: change BWC from 256 bytes to 1024 bytes dmaengine: Add MOXA ART DMA engine driver dmaengine: Add DMA_PRIVATE to BCM2835 driver dma: imx-sdma: Assign a default script number for ROM firmware cases ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-27 10:44:09 +0000