summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2019-06-26scsi: bnx2fc: Only put reference to io_req in bnx2fc_abts_cleanup if cleanup ↵Chad Dupuis1-7/+7
times out In certain tests where the SCSI error handler issues an abort that is already outstanding, we will cleanup the command so that the SCSI error handler can proceed. In some of these cases we were seeing a command mismatch: kernel: scsi host2: bnx2fc: xid:0x42b eh_abort - refcnt = 2 kernel: bnx2fc: eh_abort: io_req (xid = 0x42b) already in abts processing kernel: scsi host2: bnx2fc: xid:0x42b Entered bnx2fc_initiate_cleanup kernel: scsi host2: bnx2fc: xid:0x42b CLEANUP io_req xid = 0x80b kernel: scsi host2: bnx2fc: xid:0x80b cq_compl- cleanup resp rcvd kernel: scsi host2: bnx2fc: xid:0x42b complete - rx_state = 9 kernel: scsi host2: bnx2fc: xid:0x42b Entered process_cleanup_compl refcnt = 2, cmd_type = 1 kernel: scsi host2: bnx2fc: xid:0x42b scsi_done. err_code = 0x7 kernel: scsi host2: bnx2fc: xid:0x42b sc=ffff8807f93dfb80, result=0x7, retries=0, allowed=5 kernel: ------------[ cut here ]------------ kernel: WARNING: at /root/rpmbuild/BUILD/netxtreme2-7.14.43/obj/default/bnx2fc-2.12.1/driver/bnx2fc_io.c:1347 bnx2fc_eh_abort+0x56f/0x680 [bnx2fc]() kernel: xid=0x42b refcount=-1 kernel: Modules linked in: kernel: nls_utf8 isofs sr_mod cdrom tcp_lp dm_round_robin xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 tun bridge ebtable_filter ebtables fuse ip6table_filter ip6_tables iptable_filter bnx2fc(OE) cnic(OE) uio fcoe libfcoe 8021q libfc garp mrp scsi_transport_fc stp llc scsi_tgt vfat fat dm_service_time intel_powerclamp coretemp intel_rapl iosf_mbi kvm_intel kvm irqbypass crc32_pclmul ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd ses enclosure ipmi_ssif i2c_core hpilo hpwdt wmi sg ipmi_devintf pcspkr ipmi_si ipmi_msghandler shpchp acpi_power_meter dm_multipath nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs sd_mod crc_t10dif kernel: crct10dif_generic bnx2x(OE) crct10dif_pclmul crct10dif_common crc32c_intel mdio ptp pps_core libcrc32c smartpqi scsi_transport_sas fjes uas usb_storage dm_mirror dm_region_hash dm_log dm_mod kernel: CPU: 9 PID: 2012 Comm: scsi_eh_2 Tainted: G W OE ------------ 3.10.0-514.el7.x86_64 #1 kernel: Hardware name: HPE Synergy 480 Gen10/Synergy 480 Gen10 Compute Module, BIOS I42 03/21/2018 kernel: ffff8807f25a3d98 0000000015e7fa0c ffff8807f25a3d50 ffffffff81685eac kernel: ffff8807f25a3d88 ffffffff81085820 ffff8807f8e39000 ffff880801ff7468 kernel: ffff880801ff7610 0000000000002002 ffff8807f8e39014 ffff8807f25a3df0 kernel: Call Trace: kernel: [<ffffffff81685eac>] dump_stack+0x19/0x1b kernel: [<ffffffff81085820>] warn_slowpath_common+0x70/0xb0 kernel: [<ffffffff810858bc>] warn_slowpath_fmt+0x5c/0x80 kernel: [<ffffffff8168d842>] ? _raw_spin_lock_bh+0x12/0x50 kernel: [<ffffffffa0549e6f>] bnx2fc_eh_abort+0x56f/0x680 [bnx2fc] kernel: [<ffffffff814570af>] scsi_error_handler+0x59f/0x8b0 kernel: [<ffffffff81456b10>] ? scsi_eh_get_sense+0x250/0x250 kernel: [<ffffffff810b052f>] kthread+0xcf/0xe0 kernel: [<ffffffff810b0460>] ? kthread_create_on_node+0x140/0x140 kernel: [<ffffffff81696418>] ret_from_fork+0x58/0x90 kernel: [<ffffffff810b0460>] ? kthread_create_on_node+0x140/0x140 kernel: ---[ end trace 42deb88f2032b111 ]--- The reason that there was a mismatch is that the SCSI command is actual returned from the cleanup handler. In previous testing, the type of cleanup notification we'd get from the CQE did not trigger the code that returned the SCSI command. To overcome the previous behavior we would put a reference in bnx2fc_abts_cleanup() to account for the SCSI command. However, in cases where the SCSI command is actually off, we end up with an extra put. The fix for this is to only take the extra put in bnx2fc_abts_cleanup if the completion for the cleanup times out. Signed-off-by: Chad Dupuis <cdupuis@marvell.com> Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-26scsi: bnx2fc: Redo setting source FCoE MACChad Dupuis1-16/+40
For bnx2fc, the source FCoE MAC is stored in the fcoe_port struct in the data_src_mac field. Currently this is set in fcoe_ctlr_recv_flogi which ends up setting it by simply using fc_fcoe_set_mac() which only uses the default FCF-MAC. We still want to store the source FCoE MAC in port->data_src_mac but we want to snoop the FLOGI response payload so as to set it in the following method: 1. If a granted_mac is found, use that. 2. If not granted_mac is there but there is a FCF-MAP from the FCF then create the MAC from the FCF-MAP and the destination ID from the frame. 3. If there is no FCF-MAP the use the spec. default FCF-MAP and the destination ID from the frame. Signed-off-by: Chad Dupuis <cdupuis@marvell.com> Signed-off-by: Saurav Kashyap <skashyap@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-26scsi: ufshdc-pci: Add Intel PCI IDs for EHLAdrian Hunter1-0/+2
Add more Intel PCI IDs. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-26scsi: ufs-bsg: complete ufs-bsg job only if no errorBean Huo1-1/+3
In the case of UPIU/DME request execution failed in UFS device, ufs_bsg_request() will complete the failed bsg job by calling bsg_job_done(). Meanwhile, it returns this error status to blk-mq layer, then triggers blk-mq completing this request again, this will cause the following panic. Call trace: ll_sc___cmpxchg_case_acq_32+0x4/0x20 complete+0x28/0x70 blk_end_sync_rq+0x24/0x30 blk_mq_end_request+0xb8/0x118 bsg_job_put+0x4c/0x58 bsg_complete+0x20/0x30 blk_done_softirq+0xb4/0xe8 do_softirq+0x154/0x3f0 run_ksoftirqd+0x4c/0x68 smpboot_thread_fn+0x22c/0x268 kthread+0x130/0x138 ret_from_fork+0x10/0x1c Code: f84107fe d65f03c0 d503201f f9800011 (885ffc10) ---[ end trace d92825bff6326e66 ]--- Kernel panic - not syncing: Fatal exception in interrupt This patch is to fix this issue. The solution is to complete the ufs-bsg job only if no error happened. [mkp: commit description tweak] Fixes: df032bf27a41 (scsi: ufs: Add a bsg endpoint that supports UPIUs) Signed-off-by: Bean Huo <beanhuo@micron.com> Reviewed-by: Avri Altman <Avri.Altman@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-26scsi: ufs-bsg: fix typo in ufs_bsg_requestBean Huo1-1/+1
Correct dev_dbg to dev_err, so as to print out the error information in case of DME command failed. Signed-off-by: Bean Huo <beanhuo@micron.com> Reviewed-by: Avri Altman <Avri.Altman@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-20scsi: virtio_scsi: remove unused 'affinity_hint_set'Dongli Zhang1-3/+0
The 'affinity_hint_set' is not used any longer since commit 0d9f0a52c8b9 ("virtio_scsi: use virtio IRQ affinity"). Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-20scsi: mpt3sas: use DEVICE_ATTR_{RO, RW}Tomas Henzl1-113/+97
Use existing macros. No functional change. [mkp: typo] Signed-off-by: Tomas Henzl <thenzl@redhat.com> Acked-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-20scsi: mpt3sas: make driver options visible in sysTomas Henzl2-14/+14
Support is easier with all driver parameters visible in sysfs. Also I've replaced a constant with an octal permission. Signed-off-by: Tomas Henzl <thenzl@redhat.com> Acked-by: Suganath Prabu <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-20scsi: ufs-qcom: Add support for platforms booting ACPILee Jones1-3/+20
New Qualcomm AArch64 based laptops are now available which use UFS as their primary data storage medium. These devices are supplied with ACPI support out of the box. This patch ensures the Qualcomm UFS driver will be bound when the "QCOM24A5" H/W device is advertised as present. Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-20scsi: megaraid_sas: Use struct_size() helperGustavo A. R. Silva1-4/+2
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct MR_PD_CFG_SEQ_NUM_SYNC { ... struct MR_PD_CFG_SEQ seq[1]; } __packed; Make use of the struct_size() helper instead of an open-coded version in order to avoid any potential type mistakes. So, replace the following form: sizeof(struct MR_PD_CFG_SEQ_NUM_SYNC) + (sizeof(struct MR_PD_CFG_SEQ) * (MAX_PHYSICAL_DEVICES - 1)) with: struct_size(pd_sync, seq, MAX_PHYSICAL_DEVICES - 1) This code was detected with the help of Coccinelle. Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-20scsi: mac_scsi: Treat Last Byte Sent time-out as failureFinn Thain1-1/+4
A system bus error during a PDMA send operation can result in bytes being lost. Theoretically that could cause the target to remain in DATA OUT phase and the initiator (expecting a phase change) would time-out waiting for the Last Byte Sent flag. Should that happen, fail the transfer so the core driver will stop using PDMA with this target. Cc: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Tested-by: Stan Johnson <userm57@yahoo.com> Tested-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-20scsi: mac_scsi: Enable PDMA on Mac IIfxFinn Thain2-10/+47
Add support for Apple's custom "SCSI DMA" chip. This patch doesn't make use of its DMA capability. Just the PDMA capability is sufficient to improve sequential read throughput by a factor of 5. Cc: Michael Schmitz <schmitzmic@gmail.com> Cc: Joshua Thompson <funaho@jurai.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Tested-by: Stan Johnson <userm57@yahoo.com> Tested-by: Michael Schmitz <schmitzmic@gmail.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-20scsi: mac_scsi: Fix pseudo DMA implementation, take 2Finn Thain1-153/+218
A system bus error during a PDMA transfer can mess up the calculation of the transfer residual (the PDMA handshaking hardware lacks a byte counter). This results in data corruption. The algorithm in this patch anticipates a bus error by starting each transfer with a MOVE.B instruction. If a bus error is caught the transfer will be retried. If a bus error is caught later in the transfer (for a MOVE.W instruction) the transfer gets failed and subsequent requests for that target will use PIO instead of PDMA. This avoids the "!REQ and !ACK" error so the severity level of that message is reduced to KERN_DEBUG. Cc: Michael Schmitz <schmitzmic@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: stable@vger.kernel.org # v4.14+ Fixes: 3a0f64bfa907 ("mac_scsi: Fix pseudo DMA implementation") Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Reported-by: Chris Jones <chris@martin-jones.com> Tested-by: Stan Johnson <userm57@yahoo.com> Tested-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-20scsi: mac_scsi: Increase PIO/PDMA transfer length thresholdFinn Thain1-2/+2
Some targets introduce delays when handshaking the response to certain commands. For example, a disk may send a 96-byte response to an INQUIRY command (or a 24-byte response to a MODE SENSE command) too slowly. Apparently the first 12 or 14 bytes are handshaked okay but then the system bus error timeout is reached while transferring the next word. Since the scsi bus phase hasn't changed, the driver then sets the target borken flag to prevent further PDMA transfers. The driver also logs the warning, "switching to slow handshake". Raise the PDMA threshold to 512 bytes so that PIO transfers will be used for these commands. This default is sufficiently low that PDMA will still be used for READ and WRITE commands. The existing threshold (16 bytes) was chosen more or less at random. However, best performance requires the threshold to be as low as possible. Those systems that don't need the PIO workaround at all may benefit from mac_scsi.setup_use_pdma=1 Cc: Michael Schmitz <schmitzmic@gmail.com> Cc: stable@vger.kernel.org # v4.14+ Fixes: 3a0f64bfa907 ("mac_scsi: Fix pseudo DMA implementation") Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Tested-by: Stan Johnson <userm57@yahoo.com> Tested-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-20scsi: NCR5380: Handle PDMA failure reliablyFinn Thain1-4/+2
A PDMA error is handled in the core driver by setting the device's 'borken' flag and aborting the command. Unfortunately, do_abort() is not dependable. Perform a SCSI bus reset instead, to make sure that the command fails and gets retried. Cc: Michael Schmitz <schmitzmic@gmail.com> Cc: stable@vger.kernel.org # v4.20+ Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Tested-by: Stan Johnson <userm57@yahoo.com> Tested-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-20scsi: NCR5380: Always re-enable reselection interruptFinn Thain1-10/+2
The reselection interrupt gets disabled during selection and must be re-enabled when hostdata->connected becomes NULL. If it isn't re-enabled a disconnected command may time-out or the target may wedge the bus while trying to reselect the host. This can happen after a command is aborted. Fix this by enabling the reselection interrupt in NCR5380_main() after calls to NCR5380_select() and NCR5380_information_transfer() return. Cc: Michael Schmitz <schmitzmic@gmail.com> Cc: stable@vger.kernel.org # v4.9+ Fixes: 8b00c3d5d40d ("ncr5380: Implement new eh_abort_handler") Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Tested-by: Stan Johnson <userm57@yahoo.com> Tested-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-20Revert "scsi: ncr5380: Increase register polling limit"Finn Thain1-1/+1
This reverts commit 4822827a69d7cd3bc5a07b7637484ebd2cf88db6. The purpose of that commit was to suppress a timeout warning message which appeared to be caused by target latency. But suppressing the warning is undesirable as the warning may indicate a messed up transfer count. Another problem with that commit is that 15 ms is too long to keep interrupts disabled as interrupt latency can cause system clock drift and other problems. Cc: Michael Schmitz <schmitzmic@gmail.com> Cc: stable@vger.kernel.org Fixes: 4822827a69d7 ("scsi: ncr5380: Increase register polling limit") Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Tested-by: Stan Johnson <userm57@yahoo.com> Tested-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-20scsi: wd719x: Fix resets and abortsOndrej Zary1-12/+30
Host reset oopses because it calls wd719x_chip_init, which calls request_firmware, under a spinlock. Stop the RISC first, then flush active SCBs under a spinlock. Finally call wd719x_chip_init unlocked. Also found and fixed more bugs during tests: Affected active SCBs were not flushed during abort, bus and device reset. This caused problems in a following host reset (hang or oops). Device and bus reset failed under load because the result of the reset command is WD719X_SUE_TERM or WD719X_SUE_RESET. Don't treat these codes as error in wd719x_wait_done. wd719x_direct_cmd for RESET/ABORT commands didn't work properly, causing timeouts. Looks like it was caused by the WD719X_DISABLE_INT bit. Not setting it for RESET/ABORT commands seems to fix the probem. Also lower the log level of the corresponding "direct command completed" message to debug. Unfortunately, my documentation is missing some pages, including page 67 (SPIDER67.gif) about resets :( Reported-by: Hariprasad Kelam <hariprasad.kelam@gmail.com> Signed-off-by: Ondrej Zary <linux@zary.sk> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-20scsi: RDMA/srp: Fix a sleep-in-invalid-context bugBart Van Assche1-19/+2
The previous patch guarantees that srp_queuecommand() does not get invoked while reconnecting occurs. Hence remove the code from srp_queuecommand() that prevents command queueing while reconnecting. This patch avoids that the following can appear in the kernel log: BUG: sleeping function called from invalid context at kernel/locking/mutex.c:747 in_atomic(): 1, irqs_disabled(): 0, pid: 5600, name: scsi_eh_9 1 lock held by scsi_eh_9/5600: #0: (rcu_read_lock){....}, at: [<00000000cbb798c7>] __blk_mq_run_hw_queue+0xf1/0x1e0 Preemption disabled at: [<00000000139badf2>] __blk_mq_delay_run_hw_queue+0x78/0xf0 CPU: 9 PID: 5600 Comm: scsi_eh_9 Tainted: G W 4.15.0-rc4-dbg+ #1 Hardware name: Dell Inc. PowerEdge R720/0VWT90, BIOS 2.5.4 01/22/2016 Call Trace: dump_stack+0x67/0x99 ___might_sleep+0x16a/0x250 [ib_srp] __mutex_lock+0x46/0x9d0 srp_queuecommand+0x356/0x420 [ib_srp] scsi_dispatch_cmd+0xf6/0x3f0 scsi_queue_rq+0x4a8/0x5f0 blk_mq_dispatch_rq_list+0x73/0x440 blk_mq_sched_dispatch_requests+0x109/0x1a0 __blk_mq_run_hw_queue+0x131/0x1e0 __blk_mq_delay_run_hw_queue+0x9a/0xf0 blk_mq_run_hw_queue+0xc0/0x1e0 blk_mq_start_hw_queues+0x2c/0x40 scsi_run_queue+0x18e/0x2d0 scsi_run_host_queues+0x22/0x40 scsi_error_handler+0x18d/0x5f0 kthread+0x11c/0x140 ret_from_fork+0x24/0x30 Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Laurence Oberman <loberman@redhat.com> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Leon Romanovsky <leonro@mellanox.com> Cc: Doug Ledford <dledford@redhat.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-20scsi: Avoid that .queuecommand() gets called for a blocked SCSI deviceBart Van Assche2-6/+24
Several SCSI transport and LLD drivers surround code that does not tolerate concurrent calls of .queuecommand() with scsi_target_block() / scsi_target_unblock(). These last two functions use blk_mq_quiesce_queue() / blk_mq_unquiesce_queue() for scsi-mq request queues to prevent concurrent .queuecommand() calls. However, that is not sufficient to prevent .queuecommand() calls from scsi_send_eh_cmnd(). Hence surround the .queuecommand() call from the SCSI error handler with code that avoids that .queuecommand() gets called in the blocked state. Note: converting the .queuecommand() call in scsi_send_eh_cmnd() into code that calls blk_get_request() + blk_execute_rq() is not an option since scsi_send_eh_cmnd() must be able to make forward progress even if all requests have been allocated. Cc: Ming Lei <ming.lei@redhat.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-20scsi: Restrict user space SCSI device state changes to "running" and "offline"Bart Van Assche1-1/+6
The ability to modify the SCSI device state was introduced by commit 638127e579a4 ("[PATCH] Fix error handler offline behaviour"; v2.6.12). That same commit introduced the following device states: { SDEV_CREATED, "created" }, { SDEV_RUNNING, "running" }, { SDEV_CANCEL, "cancel" }, { SDEV_DEL, "deleted" }, { SDEV_QUIESCE, "quiesce" }, { SDEV_OFFLINE, "offline" }, The SDEV_BLOCK state was introduced later to avoid that an FC cable pull would immediately result in an I/O error (commit 1094e682310e; "[PATCH] suspending I/Os to a device"; v2.6.12). That same patch introduced the ability to set the SDEV_BLOCK state from user space. I'm not sure whether that ability was introduced on purpose or accidentally. Since there is agreement that only writing "running" or "offline" into the SCSI sysfs device state attribute makes sense, restrict sysfs writes to these values. This patch makes sure that SDEV_BLOCK is only used for its original purpose, namely to allow transport drivers and LLDs to block further .queuecommand() calls while transport layer or adapter recovery is in progress. Note: a web search for "/sys/class/scsi_device" AND "device/state" revealed several storage configuration guides. The instructions I found in these guides tell users to write the value "running" or "offline" in the SCSI device state sysfs attribute and no other values. [mkp: typo] Cc: Christoph Hellwig <hch@lst.de> Cc: Ming Lei <ming.lei@redhat.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: James Smart <james.smart@broadcom.com> Cc: Ewan D. Milne <emilne@redhat.com> Cc: Laurence Oberman <loberman@redhat.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-20scsi: cxgb4i: add support for IEEE_8021QAZ_APP_SEL_STREAM selectorVarun Prakash1-2/+7
IEEE_8021QAZ_APP_SEL_STREAM is a valid selector for iSCSI connections, so add code to use IEEE_8021QAZ_APP_SEL_STREAM selector to get priority mask. Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-20scsi: tcmu: Simplify tcmu_update_uio_info()Christophe JAILLET1-9/+7
Use 'kasprintf()' instead of: - snprintf(NULL, 0... - kmalloc(... - snprintf(... This is less verbose and saves 7 bytes (i.e. the space for '/(null)') if 'udev->dev_config' is NULL. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-20scsi: storvsc: Add ability to change scsi queue depthBranden Bonaby1-0/+11
Adding functionality to allow the SCSI queue depth to be changed by utilizing the "scsi_change_queue_depth" function. [mkp: checkpatch] Signed-off-by: Branden Bonaby <brandonbonaby94@gmail.com> Reviewed-by: Michael Kelley <mikelley@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-20scsi: mpt3sas: Mark expected switch fall-throughGustavo A. R. Silva1-0/+1
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warning: drivers/scsi/mpt3sas/mpt3sas_base.c: In function _base_update_ioc_page1_inlinewith_perf_mode : drivers/scsi/mpt3sas/mpt3sas_base.c:4510:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (ioc->high_iops_queues) { ^ drivers/scsi/mpt3sas/mpt3sas_base.c:4530:2: note: here case MPT_PERF_MODE_LATENCY: ^~~~ Warning level 3 was used: -Wimplicit-fallthrough=3 This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough. Fixes: 30cb97023f38 ("scsi: mpt3sas: Introduce perf_mode module parameter") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-20scsi: libsas: aic94xx: hisi_sas: mvsas: pm8001: Use dev_is_expander()John Garry19-61/+35
Many times in libsas, and in LLDDs which use libsas, the check for an expander device is re-implemented or open coded. Use dev_is_expander() instead. We rename this from sas_dev_type_is_expander() to not spill so many lines in referencing. Signed-off-by: John Garry <john.garry@huawei.com> Reviewed-by: Jason Yan <yanaijie@huawei.com> Reviewed-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-18scsi: mpt3sas: Update driver version to 29.100.00.00Suganath Prabu S1-2/+2
Update driver version from 28.100.00.00 to 29.100.00.00 This is equivalent to Phase 10 OOB driver. Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-18scsi: mpt3sas: Introduce perf_mode module parameterSuganath Prabu S1-18/+126
1. Introduce module parameter perf_mode for only Aero/Sea generation HBAs. 2. Update IOC page1 fields according to performance mode. Below are the performance modes that can be enabled with module parameter perf_mode: 0: Balanced - Few high iops reply queues will be enabled. Interrupt coalescing will be enabled only for these high iops reply descriptor queues. 1: Iops - Interrupt coalescing will be enabled on all reply queues. Coalescing timeout is set to 0x20.This is default value for Aero. 2: Latency - Interrupt coalescing will be enabled on all reply queues. Coalescing timeout is set to 0xA. This is a legacy behavior similar to Ventura & Invader HBA series. Default perf mode set by driver will be balanced mode if the following conditions are met: - CPU vendor = Intel; - Aero controller working in 16GT/s pcie speed Performance mode will be set to latency mode for all other cases. 4k Random Read IO performance numbers on 24 SAS SSD drives for above three permormance modes. Performance data is from Intel Skylake and HGST SS300 (drive model SDLL1DLR400GCCA1). IOPs: ----------------------------------------------------------------------- |perf_mode | qd = 1 | qd = 64 | note | |-------------|--------|---------|------------------------------------- |balanced | 259K | 3061k | Provides max performance numbers | | | | | both on lower QD workload & | | | | | also on higher QD workload | |-------------|--------|---------|------------------------------------- |iops | 220K | 3100k | Provides max performance numbers | | | | | only on higher QD workload. | |-------------|--------|---------|------------------------------------- |latency | 246k | 2226k | Provides good performance numbers | | | | | only on lower QD worklaod. | ----------------------------------------------------------------------- Avarage Latency: ----------------------------------------------------- |perf_mode | qd = 1 | qd = 64 | |-------------|--------------|----------------------| |balanced | 92.05 usec | 501.12 usec | |-------------|--------------|----------------------| |iops | 108.40 usec | 498.10 usec | |-------------|--------------|----------------------| |latency | 97.10 usec | 689.26 usec | ----------------------------------------------------- Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-18scsi: mpt3sas: Enable interrupt coalescing on high iopsSuganath Prabu S5-2/+109
Enable interrupt coalescing only on high iops queues. In ioc config page 1, offset 0x14 (ProductSpecific field) is used to determine interrupt coalescing enabled/disabled on per reply descriptor post queue group(8) basis. If 31st bit is zero, then interrupt coalescing is enabled for all reply descriptor post queues. If 31st bit is set to one, then user can enable/disable interrupt coalescing on per reply descriptor post queue group(8) basis. So to enable interrupt coalescing only on first reply descriptor post queue group (i.e. on high iops queues), set bit 0 and 31. This configuration should reset during driver unload or shutdown to the default settings. For this, the driver takes copy of default ioc page 1 and copies back the default or unmodified ioc page1 during unload and shutdown. This means that on next driver load (e.g. if older version driver is loaded by user), current modified changes on ioc page1 won't take effect. Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-18scsi: mpt3sas: Affinity high iops queues IRQs to local nodeSuganath Prabu S1-11/+62
High iops queues are mapped to non-managed irqs. Set affinity of non-managed irqs to local numa node. Low latency queues are mapped to managed irqs. Driver reserves some reply queues for max iops (through pci_alloc_irq_vectors_affinity and .pre_vectors interface). The rest of queues are for low latency. Based on io workload in io submission path, driver will decide which group of reply queues (either high iops queues or low latency queues) to be used. High iops queues will be mapped to local numa node of controller and low latency queues will be mapped to cpus across numa nodes. In general, high iops and low latency queues should fit into 128 reply queues which is the max number of reply queues supported by Aero/Sea. Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-18scsi: mpt3sas: save and use MSI-X index for posting RDSuganath Prabu S3-9/+35
In the IO submission path _base_get_msix_index is called twice. Initially while getting the smid and subsequently while posting the request descriptor (RD). Refactor code to query msix index only while posting the request descriptor. Save determined msix index in msix_io field. Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-18scsi: mpt3sas: Use high iops queues under some circumstancesSuganath Prabu S2-2/+48
The driver will use round-robin method for io submission in batches within the high iops queues when the number of in-flight ios on the target device is larger than 8. Otherwise the driver will use low latency reply queues. Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-18scsi: mpt3sas: change _base_get_msix_index prototypeSuganath Prabu S1-10/+20
Code refactoring. In function _base_get_msix_index, add scmd as second argument. This change is made in preparation for the next patch where we introduce a new function to get the MSI-X index for high iops queues. Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-18scsi: mpt3sas: Add flag high_iops_queuesSuganath Prabu S2-5/+45
Aero controllers support balanced performance mode through the ability to configure queues with different properties. Reply queues with interrupt coalescing enabled are called "high iops reply queues" and reply queues with interrupt coalescing disabled are called "low latency reply queues". The driver configures a combination of high iops and low latency reply queues if: - HBA is an AERO controller; - MSI-X vectors supported by the HBA is 128; - Total CPU count in the system more than high iops queue count; - Driver is loaded with default max_msix_vectors module parameter; and - System booted in non-kdump mode. Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-18scsi: mpt3sas: Add Atomic RequestDescriptor support on AeroSuganath Prabu S2-9/+111
If the Aero HBA supports Atomic Request Descriptors, it sets the Atomic Request Descriptor Capable bit in the IOCCapabilities field of the IOCFacts Reply message. Driver uses an Atomic Request Descriptor as an alternative method for posting an entry onto a request queue. The posting of an Atomic Request Descriptor is an atomic operation, providing a safe mechanism for multiple processors on the host to post requests without synchronization. This Atomic Request Descriptor format is identical to first 32 bits of Default Request Descriptor and uses only 32 bits. Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-18scsi: mpt3sas: function pointers of request descriptorSuganath Prabu S6-42/+49
This code refactoring introduces function pointers. Host uses Request Descriptors of different types for posting an entry onto a request queue. Based on controller type and capabilities, host can also use atomic descriptors other than normal descriptors. Using function pointer will avoid if-else statements Signed-off-by: Suganath Prabu S <suganath-prabu.subramani@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-18scsi: isci: Grammar s/the its/its/Geert Uytterhoeven1-3/+3
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-18scsi: aic7xxx: Spelling s/configuraion/configuration/Geert Uytterhoeven1-1/+1
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-18scsi: megaraid_sas: Remove unused including <linux/version.h>YueHaibing1-1/+0
Remove including <linux/version.h> that don't need it. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-18scsi: megaraid_sas: use DEVICE_ATTR_{RO, RW}Tomas Henzl1-26/+18
Use existing macros. No functional change. Signed-off-by: Tomas Henzl <thenzl@redhat.com> Acked-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-18scsi: megaraid_sas: use octal permissions instead of constantsTomas Henzl2-11/+11
Checkpatch emits a warning when using symbolic permissions. Use octal permissions instead. No functional change. Signed-off-by: Tomas Henzl <thenzl@redhat.com> Acked-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-18scsi: megaraid_sas: make max_sectors visible in sysTomas Henzl1-1/+1
Support is easier with all driver parameters visible in sysfs. Signed-off-by: Tomas Henzl <thenzl@redhat.com> Acked-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-18scsi: megaraid_sas: remove set but not used variables 'buff_addr' and 'ci_h'YueHaibing1-5/+0
Fixes gcc '-Wunused-but-set-variable' warnings: drivers/scsi/megaraid/megaraid_sas_base.c: In function megasas_fw_crash_buffer_show: drivers/scsi/megaraid/megaraid_sas_base.c:3138:16: warning: variable buff_addr set but not used [-Wunused-but-set-variable] drivers/scsi/megaraid/megaraid_sas_base.c: In function megasas_get_pd_list: drivers/scsi/megaraid/megaraid_sas_base.c:4426:13: warning: variable ci_h set but not used [-Wunused-but-set-variable] 'buff_addr' is never used since inroduction in commit fc62b3fc9021 ("megaraid_sas : Firmware crash dump feature support") 'ci_h' is not used since commit 9b3d028f3468 ("scsi: megaraid_sas: Pre-allocate frequently used DMA buffers") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-18scsi: megaraid_sas: remove set but not used variable 'sge_sz'YueHaibing1-11/+0
Fixes gcc '-Wunused-but-set-variable' warning: drivers/scsi/megaraid/megaraid_sas_base.c: In function megasas_create_frame_pool: drivers/scsi/megaraid/megaraid_sas_base.c:4124:6: warning: variable sge_sz set but not used [-Wunused-but-set-variable] It's not used any more since commit 200aed582d61 ("megaraid_sas: endianness related bug fixes and code optimization") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-18scsi: lpfc: Avoid unused function warningsNathan Chancellor1-0/+2
When building powerpc pseries_defconfig or powernv_defconfig: drivers/scsi/lpfc/lpfc_nvmet.c:224:1: error: unused function 'lpfc_nvmet_get_ctx_for_xri' [-Werror,-Wunused-function] drivers/scsi/lpfc/lpfc_nvmet.c:246:1: error: unused function 'lpfc_nvmet_get_ctx_for_oxid' [-Werror,-Wunused-function] These functions are only compiled when CONFIG_NVME_TARGET_FC is enabled. Use that same condition so there is no more warning. While the fixes commit did not introduce these functions, it caused these warnings. Fixes: 4064b27417a7 ("scsi: lpfc: Make some symbols static") Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Acked-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-18scsi: MAINTAINERS: update maintainer for PM8001Jack Wang1-2/+1
Lindar's email addess is bouncing for some time, just remove it. ProfitBricks was rebranded to 1 & 1 Cloud IONOS, so update my email address too. Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-18scsi: ibmvscsi: Don't use rc uninitialized in ibmvscsi_do_workNathan Chancellor1-2/+4
clang warns: drivers/scsi/ibmvscsi/ibmvscsi.c:2126:7: warning: variable 'rc' is used uninitialized whenever switch case is taken [-Wsometimes-uninitialized] case IBMVSCSI_HOST_ACTION_NONE: ^~~~~~~~~~~~~~~~~~~~~~~~~ drivers/scsi/ibmvscsi/ibmvscsi.c:2151:6: note: uninitialized use occurs here if (rc) { ^~ Initialize rc in the IBMVSCSI_HOST_ACTION_UNBLOCK case statement then shuffle IBMVSCSI_HOST_ACTION_NONE down to the default case statement and make it return early so that rc is never used uninitialized in this function. Fixes: 035a3c4046b5 ("scsi: ibmvscsi: redo driver work thread to use enum action states") Link: https://github.com/ClangBuiltLinux/linux/issues/502 Suggested-by: Michael Ellerman <mpe@ellerman.id.au> Suggested-by: Tyrel Datwyler <tyreld@linux.ibm.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Acked-by: Tyrel Datwyler <tyreld@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-18scsi: lpfc: Make some symbols staticYueHaibing3-5/+5
Fix sparse warnings: drivers/scsi/lpfc/lpfc_sli.c:115:1: warning: symbol 'lpfc_sli4_pcimem_bcopy' was not declared. Should it be static? drivers/scsi/lpfc/lpfc_sli.c:7854:1: warning: symbol 'lpfc_sli4_process_missed_mbox_completions' was not declared. Should it be static? drivers/scsi/lpfc/lpfc_nvmet.c:223:27: warning: symbol 'lpfc_nvmet_get_ctx_for_xri' was not declared. Should it be static? drivers/scsi/lpfc/lpfc_nvmet.c:245:27: warning: symbol 'lpfc_nvmet_get_ctx_for_oxid' was not declared. Should it be static? drivers/scsi/lpfc/lpfc_init.c:75:10: warning: symbol 'lpfc_present_cpu' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-18scsi: lpfc: Remove set but not used variables 'qp'YueHaibing1-2/+0
Fixes gcc '-Wunused-but-set-variable' warnings: drivers/scsi/lpfc/lpfc_init.c: In function lpfc_setup_cq_lookup: drivers/scsi/lpfc/lpfc_init.c:9359:30: warning: variable qp set but not used [-Wunused-but-set-variable] It's not used since commit e70596a60f88 ("scsi: lpfc: Fix poor use of hardware queues if fewer irq vectors") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-06-18scsi: qla2xxx: remove double assignment in qla2x00_update_fcportEnzo Matsumiya1-1/+0
Remove double assignment in qla2x00_update_fcport(). Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de> Acked-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-15 01:42:36 +0000