| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Convert the various uses of fallthrough comments to fallthrough;
Done via script
Link: https://lore.kernel.org/lkml/b56602fcf79f849e733e7b521bb0e17895d390fa.1582230379.git.joe@perches.com/
And by hand:
net/ipv6/ip6_fib.c has a fallthrough comment outside of an #ifdef block
that causes gcc to emit a warning if converted in-place.
So move the new fallthrough; inside the containing #ifdef/#endif too.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We need to unlock before returning if this allocation fails.
Fixes: 75f36270990c ("octeontx2-pf: Support to enable/disable pause frames via ethtool")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Alex Elder says:
====================
net: fix net-next
David: These patches resolve two issues caused by the IPA driver
being incorporated into net-next. I hope you will merge
them as soon as you can.
The IPA driver was merged into net-next last week, but two problems
arise as a result, affecting net-next and linux-next:
- The patch that defines field_max() was not incorporated into
net-next, but is required by the IPA code
- A patch that updates "sdm845.dtsi" *was* incorporated into
net-next, but other changes to that file in the Qualcomm
for-next branch lead to errors
Bjorn has agreed to incorporate the DTS file change into the
Qualcomm tree after it is reverted from net-next.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This reverts commit 9cc5ae125f0eaee471bc87fb5cbf29385fd9272a.
This commit:
b303f9f0050b arm64: dts: sdm845: Redefine interconnect provider DT nodes
found in the Qualcomm for-next tree removes/redefines the interconnect
provider node(s) used for IPA. I'm not sure whether it technically
conflicts with the IPA change to "sdm845.dtsi" in for-next, but it renders
it broken.
Revert this commit in the for-next tree, with the plan to incorporate
it into the Qualcomm tree instead.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Define FIELD_MAX(), which supplies the maximum value that can be
represented by a field value. Define field_max() as well, to go
along with the lower-case forms of the field mask functions.
Signed-off-by: Alex Elder <elder@linaro.org>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Michal Kubecek says:
====================
ethtool netlink interface, part 3
Implementation of more netlink request types:
- netdev features (ethtool -k/-K, patches 3-6)
- private flags (--show-priv-flags / --set-priv-flags, patches 7-9)
- ring sizes (ethtool -g/-G, patches 10-12)
- channel counts (ethtool -l/-L, patches 13-15)
Patch 1 is a style cleanup suggested in part 2 review and patch 2 updates
the mapping between netdev features and legacy ioctl requests (which are
still used by ethtool for backward compatibility).
Changes in v2:
- fix netdev reference leaks in error path of ethnl_set_rings() and
ethnl_set_channels() (found by Jakub Kicinski)
- use __set_bit() rather than set_bit() (suggested by David Miller)
- in replies to RINGS_GET and CHANNELS_GET requests, omit ring and
channel types not supported by driver/device (suggested by Jakub
Kicinski)
- more descriptive message size calculations in rings_reply_size() and
channels_reply_size() (suggested by Jakub Kicinski)
- coding style cleanup (suggested by Jakub Kicinski)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Send ETHTOOL_MSG_CHANNELS_NTF notification whenever channel counts of
a network device are modified using ETHTOOL_MSG_CHANNELS_SET netlink
message or ETHTOOL_SCHANNELS ioctl request.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Implement CHANNELS_SET netlink request to set channel counts of a network
device. These are traditionally set with ETHTOOL_SCHANNELS ioctl request.
Like the ioctl implementation, the generic ethtool code checks if supplied
values do not exceed driver defined limits; if they do, first offending
attribute is reported using extack. Checks preventing removing channels
used for RX indirection table or zerocopy AF_XDP socket are also
implemented.
Move ethtool_get_max_rxfh_channel() helper into common.c so that it can be
used by both ioctl and netlink code.
v2:
- fix netdev reference leak in error path (found by Jakub Kicinsky)
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Implement CHANNELS_GET request to get channel counts of a network device.
These are traditionally available via ETHTOOL_GCHANNELS ioctl request.
Omit attributes for channel types which are not supported by driver or
device (zero reported for maximum).
v2: (all suggested by Jakub Kicinski)
- minor cleanup in channels_prepare_data()
- more descriptive channels_reply_size()
- omit attributes with zero max count
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Send ETHTOOL_MSG_RINGS_NTF notification whenever ring sizes of a network
device are modified using ETHTOOL_MSG_RINGS_SET netlink message or
ETHTOOL_SRINGPARAM ioctl request.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Implement RINGS_SET netlink request to set ring sizes of a network device.
These are traditionally set with ETHTOOL_SRINGPARAM ioctl request.
Like the ioctl implementation, the generic ethtool code checks if supplied
values do not exceed driver defined limits; if they do, first offending
attribute is reported using extack.
v2:
- fix netdev reference leak in error path (found by Jakub Kicinsky)
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Implement RINGS_GET request to get ring sizes of a network device. These
are traditionally available via ETHTOOL_GRINGPARAM ioctl request.
Omit attributes for ring types which are not supported by driver or device
(zero reported for maximum).
v2: (all suggested by Jakub Kicinski)
- minor cleanup in rings_prepare_data()
- more descriptive rings_reply_size()
- omit attributes with zero max size
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Send ETHTOOL_MSG_PRIVFLAGS_NTF notification whenever private flags of
a network device are modified using ETHTOOL_MSG_PRIVFLAGS_SET netlink
message or ETHTOOL_SPFLAGS ioctl request.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Implement PRIVFLAGS_SET netlink request to set private flags of a network
device. These are traditionally set with ETHTOOL_SPFLAGS ioctl request.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Implement PRIVFLAGS_GET request to get private flags for a network device.
These are traditionally available via ETHTOOL_GPFLAGS ioctl request.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Send ETHTOOL_MSG_FEATURES_NTF notification whenever network device features
are modified using ETHTOOL_MSG_FEATURES_SET netlink message, ethtool ioctl
request or any other way resulting in call to netdev_update_features() or
netdev_change_features()
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Implement FEATURES_SET netlink request to set network device features.
These are traditionally set using ETHTOOL_SFEATURES ioctl request.
Actual change is subject to netdev_change_features() sanity checks so that
it can differ from what was requested. Unlike with most other SET requests,
in addition to error code and optional extack, kernel provides an optional
reply message (ETHTOOL_MSG_FEATURES_SET_REPLY) in the same format but with
different semantics: information about difference between user request and
actual result and difference between old and new state of dev->features.
This reply message can be suppressed by setting ETHTOOL_FLAG_OMIT_REPLY
flag in request header.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Unlike other SET type commands, modifying netdev features is required to
provide a reply telling userspace what was actually changed, compared to
what was requested. For that purpose, the "modified" flag provided by
ethnl_update_bitset() is not sufficient, we need full information which
bits were requested to change.
Therefore provide ethnl_parse_bitset() returning effective value and mask
bitmaps equivalent to the contents of a bitset nested attribute.
v2: use non-atomic __set_bit() (suggested by David Miller)
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Implement FEATURES_GET request to get network device features. These are
traditionally available via ETHTOOL_GFEATURES ioctl request.
v2:
- style cleanup suggested by Jakub Kicinski
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Legacy ioctl request like ETHTOOL_GTXCSUM are still used by ethtool utility
to get values of legacy flags (which rather work as feature groups). These
are calculated from values of actual features and request to set them is
implemented as an attempt to set all features mapping to them but there are
two inconsistencies:
- tx-checksum-fcoe-crc is shown under tx-checksumming but NETIF_F_FCOE_CRC
is not included in ETHTOOL_GTXCSUM/ETHTOOL_STXCSUM
- tx-scatter-gather-fraglist is shown under scatter-gather but
NETIF_F_FRAGLIST is not included in ETHTOOL_GSG/ETHTOOL_SSG
As the mapping in ethtool output is more correct from logical point of
view, fix ethtool_get_feature_mask() to match it.
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Andrew Lunn pointed out that even if it's documented that
ethnl_parse_header() takes reference to network device if it fills it
into the target structure, its name doesn't make it apparent so that
corresponding dev_put() looks like mismatched.
Rename the function ethnl_parse_header_dev_get() to indicate that it
takes a reference.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Paul Blakey says:
====================
Introduce connection tracking offload
Background
----------
The connection tracking action provides the ability to associate connection state to a packet.
The connection state may be used for stateful packet processing such as stateful firewalls
and NAT operations.
Connection tracking in TC SW
----------------------------
The CT state may be matched only after the CT action is performed.
As such, CT use cases are commonly implemented using multiple chains.
Consider the following TC filters, as an example:
1. tc filter add dev ens1f0_0 ingress prio 1 chain 0 proto ip flower \
src_mac 24:8a:07:a5:28:01 ct_state -trk \
action ct \
pipe action goto chain 2
2. tc filter add dev ens1f0_0 ingress prio 1 chain 2 proto ip flower \
ct_state +trk+new \
action ct commit \
pipe action tunnel_key set \
src_ip 0.0.0.0 \
dst_ip 7.7.7.8 \
id 98 \
dst_port 4789 \
action mirred egress redirect dev vxlan0
3. tc filter add dev ens1f0_0 ingress prio 1 chain 2 proto ip flower \
ct_state +trk+est \
action tunnel_key set \
src_ip 0.0.0.0 \
dst_ip 7.7.7.8 \
id 98 \
dst_port 4789 \
action mirred egress redirect dev vxlan0
Filter #1 (chain 0) decides, after initial packet classification, to send the packet to the
connection tracking module (ct action).
Once the ct_state is initialized by the CT action the packet processing continues on chain 2.
Chain 2 classifies the packet based on the ct_state.
Filter #2 matches on the +trk+new CT state while filter #3 matches on the +trk+est ct_state.
MLX5 Connection tracking HW offload - MLX5 driver patches
------------------------------
The MLX5 hardware model aligns with the software model by realizing a multi-table
architecture. In SW the TC CT action sets the CT state on the skb. Similarly,
HW sets the CT state on a HW register. Driver gets this CT state while offloading
a tuple with a new ct_metadata action that provides it.
Matches on ct_state are translated to HW register matches.
TC filter with CT action broken to two rules, a pre_ct rule, and a post_ct rule.
pre_ct rule:
Inserted on the corrosponding tc chain table, matches on original tc match, with
actions: any pre ct actions, set fte_id, set zone, and goto the ct table.
The fte_id is a register mapping uniquely identifying this filter.
post_ct_rule:
Inserted in a post_ct table, matches on the fte_id register mapping, with
actions: counter + any post ct actions (this is usally 'goto chain X')
post_ct table is a table that all the tuples inserted to the ct table goto, so
if there is a tuple hit, packet will continue from ct table to post_ct table,
after being marked with the CT state (mark/label..)
This design ensures that the rule's actions and counters will be executed only after a CT hit.
HW misses will continue processing in SW from the last chain ID that was processed in hardware.
The following illustrates the HW model:
+-------------------+ +--------------------+ +--------------+
+ pre_ct (tc chain) +----->+ CT (nat or no nat) +--->+ post_ct +----->
+ original match + | + tuple + zone match + | + fte_id match + |
+-------------------+ | +--------------------+ | +--------------+ |
v v v
set chain miss mapping set mark original
set fte_id set label filter
set zone set established actions
set tunnel_id do nat (if needed)
do decap
To fill CT table, driver registers a CB for flow offload events, for each new
flow table that is passed to it from offloading ct actions. Once a flow offload
event is triggered on this CB, offload this flow to the hardware CT table.
Established events offload
--------------------------
Currently, act_ct maintains an FT instance per ct zone. Flow table entries
are created, per ct connection, when connections enter an established
state and deleted otherwise. Once an entry is created, the FT assumes
ownership of the entries, and manages their aging. FT is used for software
offload of conntrack. FT entries associate 5-tuples with an action list.
The act_ct changes in this patchset:
Populate the action list with a (new) ct_metadata action, providing the
connection's ct state (zone,mark and label), and mangle actions if NAT
is configured.
Pass the action's flow table instance as ct action entry parameter,
so when the action is offloaded, the driver may register a callback on
it's block to receive FT flow offload add/del/stats events.
Netilter changes
--------------------------
The netfilter changes export the relevant bits, and add the relevant CBs
to support the above.
Applying this patchset
--------------------------
On top of current net-next ("r8169: simplify getting stats by using netdev_stats_to_stats64"),
pull Saeed's ct-offload branch, from git git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux.git
and fix the following non trivial conflict in fs_core.c as follows:
Then apply this patchset.
Changelog:
v2->v3:
Added the first two patches needed after rebasing on net-next:
"net/mlx5: E-Switch, Enable reg c1 loopback when possible"
"net/mlx5e: en_rep: Create uplink rep root table after eswitch offloads table"
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Clear action, as with software, removes all ct metadata from
the packet.
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Oz Shlomo <ozsh@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Mark packets with a unique tupleid, and on miss use that id to get
the act ct restore_cookie. Using that restore cookie, we ask CT to
restore the relevant info on the SKB.
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Oz Shlomo <ozsh@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Register driver callbacks with the nf flow table platform.
FT add/delete events will create/delete FTE in the CT/CT_NAT tables.
Restoring the CT state on miss will be added in the following patch.
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Oz Shlomo <ozsh@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for offloading tc ct action and ct matches.
We translate the tc filter with CT action the following HW model:
+-------------------+ +--------------------+ +--------------+
+ pre_ct (tc chain) +----->+ CT (nat or no nat) +--->+ post_ct +----->
+ original match + | + tuple + zone match + | + fte_id match + |
+-------------------+ | +--------------------+ | +--------------+ |
v v v
set chain miss mapping set mark original
set fte_id set label filter
set zone set established actions
set tunnel_id do nat (if needed)
do decap
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Oz Shlomo <ozsh@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add relevant getter for ct info dissector.
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, we write chain register mapping on miss from the the last
prio of a chain. It is used to restore the chain in software.
To support re-using the chain register mapping from global tables (such
as CT tuple table) misses, export the chain mapping.
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Oz Shlomo <ozsh@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
FTEs in global tables may match on packets from multiple in_ports.
Provide the capability to omit the in_port match condition.
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Oz Shlomo <ozsh@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, flow tables are automatically connected according to their
<chain,prio,level> tuple.
Introduce global tables which are flow tables that are detached from the
eswitch chains processing, and will be connected by explicitly referencing
them from multiple chains.
Add this new table type, and allow connecting them by refenece.
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Oz Shlomo <ozsh@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pass the zone's flow table instance on the flow action to the drivers.
Thus, allowing drivers to register FT add/del/stats callbacks.
Finally, enable hardware offload on the flow table instance.
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If driver deleted an FT entry, a FT failed to offload, or registered to the
flow table after flows were already added, we still get packets in
software.
For those packets, while restoring the ct state from the flow table
entry, refresh it's hardware offload.
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Provide an API to restore the ct state pointer.
This may be used by drivers to restore the ct state if they
miss in tc chain after they already did the hardware connection
tracking action (ct_metadata action).
For example, consider the following rule on chain 0 that is in_hw,
however chain 1 is not_in_hw:
$ tc filter add dev ... chain 0 ... \
flower ... action ct pipe action goto chain 1
Packets of a flow offloaded (via nf flow table offload) by the driver
hit this rule in hardware, will be marked with the ct metadata action
(mark, label, zone) that does the equivalent of the software ct action,
and when the packet jumps to hardware chain 1, there would be a miss.
CT was already processed in hardware. Therefore, the driver's miss
handling should restore the ct state on the skb, using the provided API,
and continue the packet processing in chain 1.
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
NF flow table API associate 5-tuple rule with an action list by calling
the flow table type action() CB to fill the rule's actions.
In action CB of act_ct, populate the ct offload entry actions with a new
ct_metadata action. Initialize the ct_metadata with the ct mark, label and
zone information. If ct nat was performed, then also append the relevant
packet mangle actions (e.g. ipv4/ipv6/tcp/udp header rewrites).
Drivers that offload the ft entries may match on the 5-tuple and perform
the action list.
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Let drivers to add their cb allowing them to receive flow offload events
of type TC_SETUP_CLSFLOWER (REPLACE/DEL/STATS) for flows managed by the
flow table.
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The eswitch offloads table, which has the reps (vport) rx miss rules,
was moved from OFFLOADS namespace [0,0] (prio, level), to [1,0], so
the restore table (the new [0,0]) can come before it. The destinations
of these miss rules is the rep root ft (ttc for non uplink reps).
Uplink rep root ft is created as OFFLOADS namespace [0,1], and is used
as a hook to next RX prio (either ethtool or ttc), but this fails to
pass fs_core level's check.
Move uplink rep root ft to OFFLOADS prio 1, level 1 ([1,1]), so it
will keep the same relative position after the restore table
change.
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Enable reg c1 loopback if firmware reports it's supported,
as this is needed for restoring packet metadata (e.g chain).
Also define helper to query if it is enabled.
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
|
|
Kuniyuki Iwashima says:
====================
Improve bind(addr, 0) behaviour.
Currently we fail to bind sockets to ephemeral ports when all of the ports
are exhausted even if all sockets have SO_REUSEADDR enabled. In this case,
we still have a chance to connect to the different remote hosts.
These patches add net.ipv4.ip_autobind_reuse option and fix the behaviour
to fully utilize all space of the local (addr, port) tuples.
Changes in v5:
- Add more description to documents.
- Fix sysctl option to use proc_dointvec_minmax.
- Remove the Fixes: tag and squash two commits.
Changes in v4:
- Add net.ipv4.ip_autobind_reuse option to not change the current behaviour.
- Modify .gitignore for test.
https://lore.kernel.org/netdev/20200308181615.90135-1-kuniyu@amazon.co.jp/
Changes in v3:
- Change the title and write more specific description of the 3rd patch.
- Add a test in tools/testing/selftests/net/ as the 4th patch.
https://lore.kernel.org/netdev/20200229113554.78338-1-kuniyu@amazon.co.jp/
Changes in v2:
- Change the description of the 2nd patch ('localhost' -> 'address').
- Correct the description and the if statement of the 3rd patch.
https://lore.kernel.org/netdev/20200226074631.67688-1-kuniyu@amazon.co.jp/
v1 with tests:
https://lore.kernel.org/netdev/20200220152020.13056-1-kuniyu@amazon.co.jp/
====================
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This commit adds a test to check if we can fully utilize 4-tuples for
connect() when all ephemeral ports are exhausted.
The test program changes the local port range to use only one port and binds
two sockets with or without SO_REUSEADDR and SO_REUSEPORT, and with the same
EUID or with different EUIDs, then do listen().
We should be able to bind only one socket having both SO_REUSEADDR and
SO_REUSEPORT per EUID, which restriction is to prevent unintentional
listen().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
SO_REUSEPORT per EUID.
If there is no TCP_LISTEN socket on a ephemeral port, we can bind multiple
sockets having SO_REUSEADDR to the same port. Then if all sockets bound to
the port have also SO_REUSEPORT enabled and have the same EUID, all of them
can be listened. This is not safe.
Let's say, an application has root privilege and binds sockets to an
ephemeral port with both of SO_REUSEADDR and SO_REUSEPORT. When none of
sockets is not listened yet, a malicious user can use sudo, exhaust
ephemeral ports, and bind sockets to the same ephemeral port, so he or she
can call listen and steal the port.
To prevent this issue, we must not bind more than one sockets that have the
same EUID and both of SO_REUSEADDR and SO_REUSEPORT.
On the other hand, if the sockets have different EUIDs, the issue above does
not occur. After sockets with different EUIDs are bound to the same port and
one of them is listened, no more socket can be listened. This is because the
condition below is evaluated true and listen() for the second socket fails.
} else if (!reuseport_ok ||
!reuseport || !sk2->sk_reuseport ||
rcu_access_pointer(sk->sk_reuseport_cb) ||
(sk2->sk_state != TCP_TIME_WAIT &&
!uid_eq(uid, sock_i_uid(sk2)))) {
if (inet_rcv_saddr_equal(sk, sk2, true))
break;
}
Therefore, on the same port, we cannot do listen() for multiple sockets with
different EUIDs and any other listen syscalls fail, so the problem does not
happen. In this case, we can still call connect() for other sockets that
cannot be listened, so we have to succeed to call bind() in order to fully
utilize 4-tuples.
Summarizing the above, we should be able to bind only one socket having
SO_REUSEADDR and SO_REUSEPORT per EUID.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
exhausted.
Commit aacd9289af8b82f5fb01bcdd53d0e3406d1333c7 ("tcp: bind() use stronger
condition for bind_conflict") introduced a restriction to forbid to bind
SO_REUSEADDR enabled sockets to the same (addr, port) tuple in order to
assign ports dispersedly so that we can connect to the same remote host.
The change results in accelerating port depletion so that we fail to bind
sockets to the same local port even if we want to connect to the different
remote hosts.
You can reproduce this issue by following instructions below.
1. # sysctl -w net.ipv4.ip_local_port_range="32768 32768"
2. set SO_REUSEADDR to two sockets.
3. bind two sockets to (localhost, 0) and the latter fails.
Therefore, when ephemeral ports are exhausted, bind(0) should fallback to
the legacy behaviour to enable the SO_REUSEADDR option and make it possible
to connect to different remote (addr, port) tuples.
This patch allows us to bind SO_REUSEADDR enabled sockets to the same
(addr, port) only when net.ipv4.ip_autobind_reuse is set 1 and all
ephemeral ports are exhausted. This also allows connect() and listen() to
share ports in the following way and may break some applications. So the
ip_autobind_reuse is 0 by default and disables the feature.
1. setsockopt(sk1, SO_REUSEADDR)
2. setsockopt(sk2, SO_REUSEADDR)
3. bind(sk1, saddr, 0)
4. bind(sk2, saddr, 0)
5. connect(sk1, daddr)
6. listen(sk2)
If it is set 1, we can fully utilize the 4-tuples, but we should use
IP_BIND_ADDRESS_NO_PORT for bind()+connect() as possible.
The notable thing is that if all sockets bound to the same port have
both SO_REUSEADDR and SO_REUSEPORT enabled, we can bind sockets to an
ephemeral port and also do listen().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When we get an ephemeral port, the relax is false, so the SO_REUSEADDR
conditions may be evaluated twice. We do not need to check the conditions
again.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Jakub Kicinski says:
====================
ethtool: consolidate irq coalescing - part 4
Convert more drivers following the groundwork laid in a recent
patch set [1] and continued in [2], [3]. The aim of the effort
is to consolidate irq coalescing parameter validation in the core.
This set converts 15 drivers in drivers/net/ethernet - remaining
Intel drivers, Freescale/NXP, and others.
2 more conversion sets to come.
[1] https://lore.kernel.org/netdev/20200305051542.991898-1-kuba@kernel.org/
[2] https://lore.kernel.org/netdev/20200306010602.1620354-1-kuba@kernel.org/
[3] https://lore.kernel.org/netdev/20200310021512.1861626-1-kuba@kernel.org/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.
This driver did not previously reject unsupported parameters.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.
This driver did not previously reject unsupported parameters.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.
This driver was rejecting almost all unsupported
parameters already, it was only missing a check
for tx_max_coalesced_frames_irq.
As a side effect of these changes the error code for
unsupported params changes from ENOTSUPP to EOPNOTSUPP.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.
This driver did not previously reject unsupported parameters.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.
This driver was rejecting almost all unsupported
parameters already, it was only missing a check
for tx_max_coalesced_frames_irq.
As a side effect of these changes the error code for
unsupported params changes from ENOTSUPP to EOPNOTSUPP.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Set ethtool_ops->supported_coalesce_params to let
the core reject unsupported coalescing parameters.
This driver did not previously reject unsupported parameters.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
