Age | Commit message (Collapse) | Author | Files | Lines |
|
Add handler of host SMCs in KVM nVHE trap handler. Forward all SMCs to
EL3 and propagate the result back to EL1. This is done in preparation
for validating host SMCs in KVM protected mode.
The implementation assumes that firmware uses SMCCC v1.2 or older. That
means x0-x17 can be used both for arguments and results, other GPRs are
preserved.
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201202184122.26046-16-dbrazdil@google.com
|
|
When KVM starts validating host's PSCI requests, it will need to map
MPIDR back to the CPU ID. To this end, copy cpu_logical_map into nVHE
hyp memory when KVM is initialized.
Only copy the information for CPUs that are online at the point of KVM
initialization so that KVM rejects CPUs whose features were not checked
against the finalized capabilities.
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201202184122.26046-15-dbrazdil@google.com
|
|
When compiling with __KVM_NVHE_HYPERVISOR__, redefine per_cpu_offset()
to __hyp_per_cpu_offset() which looks up the base of the nVHE per-CPU
region of the given cpu and computes its offset from the
.hyp.data..percpu section.
This enables use of per_cpu_ptr() helpers in nVHE hyp code. Until now
only this_cpu_ptr() was supported by setting TPIDR_EL2.
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201202184122.26046-14-dbrazdil@google.com
|
|
Add rules for renaming the .data..ro_after_init ELF section in KVM nVHE
object files to .hyp.data..ro_after_init, linking it into the kernel
and mapping it in hyp at runtime.
The section is RW to the host, then mapped RO in hyp. The expectation is
that the host populates the variables in the section and they are never
changed by hyp afterwards.
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201202184122.26046-13-dbrazdil@google.com
|
|
MAIR_EL2 and TCR_EL2 are currently initialized from their _EL1 values.
This will not work once KVM starts intercepting PSCI ON/SUSPEND SMCs
and initializing EL2 state before EL1 state.
Obtain the EL1 values during KVM init and store them in the init params
struct. The struct will stay in memory and can be used when booting new
cores.
Take the opportunity to move copying the T0SZ value from idmap_t0sz in
KVM init rather than in .hyp.idmap.text. This avoids the need for the
idmap_t0sz symbol alias.
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201202184122.26046-12-dbrazdil@google.com
|
|
Once we start initializing KVM on newly booted cores before the rest of
the kernel, parameters to __do_hyp_init will need to be provided by EL2
rather than EL1. At that point it will not be possible to pass its three
arguments directly because PSCI_CPU_ON only supports one context
argument.
Refactor __do_hyp_init to accept its parameters in a struct. This
prepares the code for KVM booting cores as well as removes any limits on
the number of __do_hyp_init arguments.
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201202184122.26046-11-dbrazdil@google.com
|
|
KVM precomputes the hyp VA of __kvm_hyp_host_vector, essentially a
constant (minus ASLR), before passing it to __kvm_hyp_init.
Now that we have alternatives for converting kimg VA to hyp VA, replace
this with computing the constant inside __kvm_hyp_init, thus removing
the need for an argument.
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201202184122.26046-10-dbrazdil@google.com
|
|
When a CPU is booted in EL2, the kernel checks for VHE support and
initializes the CPU core accordingly. For nVHE it also installs the stub
vectors and drops down to EL1.
Once KVM gains the ability to boot cores without going through the
kernel entry point, it will need to initialize the CPU the same way.
Extract the relevant bits of el2_setup into an init_el2_state macro
with an argument specifying whether to initialize for VHE or nVHE.
The following ifdefs are removed:
* CONFIG_ARM_GIC_V3 - always selected on arm64
* CONFIG_COMPAT - hstr_el2 can be set even without 32-bit support
No functional change intended. Size of el2_setup increased by
148 bytes due to duplication.
Signed-off-by: David Brazdil <dbrazdil@google.com>
[maz: reworked to fit the new PSTATE initial setup code]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201202184122.26046-9-dbrazdil@google.com
|
|
CPU index should never be negative. Change the signature of
(set_)cpu_logical_map to take an unsigned int.
This still works even if the users treat the CPU index as an int,
and will allow the hypervisor's implementation to check that the index
is valid with a single upper-bound check.
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201202184122.26046-8-dbrazdil@google.com
|
|
Make it possible to retrieve a copy of the psci_0_1_function_ids struct.
This is useful for KVM if it is configured to intercept host's PSCI SMCs.
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20201202184122.26046-7-dbrazdil@google.com
|
|
Small refactor that replaces array of v0.1 function IDs indexed by an
enum of function-name constants with a struct of function IDs "indexed"
by field names. This is done in preparation for exposing the IDs to
other parts of the kernel. Exposing a struct avoids the need for
bounds checking.
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20201202184122.26046-6-dbrazdil@google.com
|
|
Refactor implementation of v0.1+ functions (CPU_SUSPEND, CPU_OFF,
CPU_ON, MIGRATE) to have two functions psci_0_1_foo / psci_0_2_foo that
select the function ID and call a common helper __psci_foo.
This is a small cleanup so that the function ID array is only used for
v0.1 configurations.
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20201202184122.26046-5-dbrazdil@google.com
|
|
KVM's host PSCI SMC filter needs to be aware of the PSCI version of the
system but currently it is impossible to distinguish between v0.1 and
PSCI disabled because both have get_version == NULL.
Populate get_version for v0.1 with a function that returns a constant.
psci_opt.get_version is currently unused so this has no effect on
existing functionality.
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20201202184122.26046-4-dbrazdil@google.com
|
|
Expose the boolean value whether the system is running with KVM in
protected mode (nVHE + kernel param). CPU capability was selected over
a global variable to allow use in alternatives.
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201202184122.26046-3-dbrazdil@google.com
|
|
Add an early parameter that allows users to select the mode of operation
for KVM/arm64.
For now, the only supported value is "protected". By passing this flag
users opt into the hypervisor placing additional restrictions on the
host kernel. These allow the hypervisor to spawn guests whose state is
kept private from the host. Restrictions will include stage-2 address
translation to prevent host from accessing guest memory, filtering its
SMC calls, etc.
Without this parameter, the default behaviour remains selecting VHE/nVHE
based on hardware support and CONFIG_ARM64_VHE.
Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201202184122.26046-2-dbrazdil@google.com
|
|
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Now that the PAN toggling has been removed, the only user of
__system_matches_cap() is has_generic_auth(), which is only built when
CONFIG_ARM64_PTR_AUTH is selected, and Qian reports that this results in
a build-time warning when CONFIG_ARM64_PTR_AUTH is not selected:
| arch/arm64/kernel/cpufeature.c:2649:13: warning: '__system_matches_cap' defined but not used [-Wunused-function]
| static bool __system_matches_cap(unsigned int n)
| ^~~~~~~~~~~~~~~~~~~~
It's tricky to restructure things to prevent this, so let's mark
__system_matches_cap() as __maybe_unused, as we used to do for the other
user of __system_matches_cap() which we just removed.
Reported-by: Qian Cai <qcai@redhat.com>
Suggested-by: Qian Cai <qcai@redhat.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20201203152403.26100-1-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Now that arm64 no longer uses UAO, remove the vestigal feature detection
code and Kconfig text.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201202131558.39270-13-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Some code (e.g. futex) needs to make privileged accesses to userspace
memory, and uses uaccess_{enable,disable}_privileged() in order to
permit this. All other uaccess primitives use LDTR/STTR, and never need
to toggle PAN.
Remove the redundant PAN toggling.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201202131558.39270-12-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Now that set_fs() is gone, addr_limit_user_check() is redundant. Remove
the checks and associated thread flag.
To ensure that _TIF_WORK_MASK can be used as an immediate value in an
AND instruction (as it is in `ret_to_user`), TIF_MTE_ASYNC_FAULT is
renumbered to keep the constituent bits of _TIF_WORK_MASK contiguous.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201202131558.39270-11-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Now that the uaccess primitives dont take addr_limit into account, we
have no need to manipulate this via set_fs() and get_fs(). Remove
support for these, along with some infrastructure this renders
redundant.
We no longer need to flip UAO to access kernel memory under KERNEL_DS,
and head.S unconditionally clears UAO for all kernel configurations via
an ERET in init_kernel_el. Thus, we don't need to dynamically flip UAO,
nor do we need to context-switch it. However, we still need to adjust
PAN during SDEI entry.
Masking of __user pointers no longer needs to use the dynamic value of
addr_limit, and can use a constant derived from the maximum possible
userspace task size. A new TASK_SIZE_MAX constant is introduced for
this, which is also used by core code. In configurations supporting
52-bit VAs, this may include a region of unusable VA space above a
48-bit TTBR0 limit, but never includes any portion of TTBR1.
Note that TASK_SIZE_MAX is an exclusive limit, while USER_DS and
KERNEL_DS were inclusive limits, and is converted to a mask by
subtracting one.
As the SDEI entry code repurposes the otherwise unnecessary
pt_regs::orig_addr_limit field to store the TTBR1 of the interrupted
context, for now we rename that to pt_regs::sdei_ttbr1. In future we can
consider factoring that out.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: James Morse <james.morse@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201202131558.39270-10-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Now the uaccess primitives use LDTR/STTR unconditionally, the
uao_{ldp,stp,user_alternative} asm macros are misnamed, and have a
redundant argument. Let's remove the redundant argument and rename these
to user_{ldp,stp,ldst} respectively to clean this up.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Robin Murohy <robin.murphy@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201202131558.39270-9-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
This patch separates arm64's user and kernel memory access primitives
into distinct routines, adding new __{get,put}_kernel_nofault() helpers
to access kernel memory, upon which core code builds larger copy
routines.
The kernel access routines (using LDR/STR) are not affected by PAN (when
legitimately accessing kernel memory), nor are they affected by UAO.
Switching to KERNEL_DS may set UAO, but this does not adversely affect
the kernel access routines.
The user access routines (using LDTR/STTR) are not affected by PAN (when
legitimately accessing user memory), but are affected by UAO. As these
are only legitimate to use under USER_DS with UAO clear, this should not
be problematic.
Routines performing atomics to user memory (futex and deprecated
instruction emulation) still need to transiently clear PAN, and these
are left as-is. These are never used on kernel memory.
Subsequent patches will refactor the uaccess helpers to remove redundant
code, and will also remove the redundant PAN/UAO manipulation.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201202131558.39270-8-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
As a step towards implementing __{get,put}_kernel_nofault(), this patch
splits most user-memory specific logic out of __{get,put}_user(), with
the memory access and fault handling in new __{raw_get,put}_mem()
helpers.
For now the LDR/LDTR patching is left within the *get_mem() helpers, and
will be removed in a subsequent patch.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201202131558.39270-7-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Currently __copy_user_flushcache() open-codes raw_copy_from_user(), and
doesn't use uaccess_mask_ptr() on the user address. Let's have it call
raw_copy_from_user(), which is both a simplification and ensures that
user pointers are masked under speculation.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201202131558.39270-6-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
We currently have many uaccess_*{enable,disable}*() variants, which
subsequent patches will cut down as part of removing set_fs() and
friends. Once this simplification is made, most uaccess routines will
only need to ensure that the user page tables are mapped in TTBR0, as is
currently dealt with by uaccess_ttbr0_{enable,disable}().
The existing uaccess_{enable,disable}() routines ensure that user page
tables are mapped in TTBR0, and also disable PAN protections, which is
necessary to be able to use atomics on user memory, but also permit
unrelated privileged accesses to access user memory.
As preparatory step, let's rename uaccess_{enable,disable}() to
uaccess_{enable,disable}_privileged(), highlighting this caveat and
discouraging wider misuse. Subsequent patches can reuse the
uaccess_{enable,disable}() naming for the common case of ensuring the
user page tables are mapped in TTBR0.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201202131558.39270-5-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
In preparation for removing addr_limit and set_fs() we must decouple the
SDEI PAN/UAO manipulation from the uaccess code, and explicitly
reinitialize these as required.
SDEI enters the kernel with a non-architectural exception, and prior to
the most recent revision of the specification (ARM DEN 0054B), PSTATE
bits (e.g. PAN, UAO) are not manipulated in the same way as for
architectural exceptions. Notably, older versions of the spec can be
read ambiguously as to whether PSTATE bits are inherited unchanged from
the interrupted context or whether they are generated from scratch, with
TF-A doing the latter.
We have three cases to consider:
1) The existing TF-A implementation of SDEI will clear PAN and clear UAO
(along with other bits in PSTATE) when delivering an SDEI exception.
2) In theory, implementations of SDEI prior to revision B could inherit
PAN and UAO (along with other bits in PSTATE) unchanged from the
interrupted context. However, in practice such implementations do not
exist.
3) Going forward, new implementations of SDEI must clear UAO, and
depending on SCTLR_ELx.SPAN must either inherit or set PAN.
As we can ignore (2) we can assume that upon SDEI entry, UAO is always
clear, though PAN may be clear, inherited, or set per SCTLR_ELx.SPAN.
Therefore, we must explicitly initialize PAN, but do not need to do
anything for UAO.
Considering what we need to do:
* When set_fs() is removed, force_uaccess_begin() will have no HW
side-effects. As this only clears UAO, which we can assume has already
been cleared upon entry, this is not a problem. We do not need to add
code to manipulate UAO explicitly.
* PAN may be cleared upon entry (in case 1 above), so where a kernel is
built to use PAN and this is supported by all CPUs, the kernel must
set PAN upon entry to ensure expected behaviour.
* PAN may be inherited from the interrupted context (in case 3 above),
and so where a kernel is not built to use PAN or where PAN support is
not uniform across CPUs, the kernel must clear PAN to ensure expected
behaviour.
This patch reworks the SDEI code accordingly, explicitly setting PAN to
the expected state in all cases. To cater for the cases where the kernel
does not use PAN or this is not uniformly supported by hardware we add a
new cpu_has_pan() helper which can be used regardless of whether the
kernel is built to use PAN.
The existing system_uses_ttbr0_pan() is redefined in terms of
system_uses_hw_pan() both for clarity and as a minor optimization when
HW PAN is not selected.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: James Morse <james.morse@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201202131558.39270-3-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The SDEI support code is split across arch/arm64/ and drivers/firmware/,
largley this is split so that the arch-specific portions are under
arch/arm64, and the management logic is under drivers/firmware/.
However, exception entry fixups are currently under drivers/firmware.
Let's move the exception entry fixups under arch/arm64/. This
de-clutters the management logic, and puts all the arch-specific
portions in one place. Doing this also allows the fixups to be applied
earlier, so things like PAN and UAO will be in a known good state before
we run other logic. This will also make subsequent refactoring easier.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: James Morse <james.morse@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201202131558.39270-2-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
As with SCTLR_ELx and other control registers, some PSTATE bits are
UNKNOWN out-of-reset, and we may not be able to rely on hardware or
firmware to initialize them to our liking prior to entry to the kernel,
e.g. in the primary/secondary boot paths and return from idle/suspend.
It would be more robust (and easier to reason about) if we consistently
initialized PSTATE to a default value, as we do with control registers.
This will ensure that the kernel is not adversely affected by bits it is
not aware of, e.g. when support for a feature such as PAN/UAO is
disabled.
This patch ensures that PSTATE is consistently initialized at boot time
via an ERET. This is not intended to relax the existing requirements
(e.g. DAIF bits must still be set prior to entering the kernel). For
features detected dynamically (which may require system-wide support),
it is still necessary to subsequently modify PSTATE.
As ERET is not always a Context Synchronization Event, an ISB is placed
before each exception return to ensure updates to control registers have
taken effect. This handles the kernel being entered with SCTLR_ELx.EOS
clear (or any future control bits being in an UNKNOWN state).
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201113124937.20574-6-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Let's make SCTLR_ELx initialization a bit clearer by using meaningful
names for the initialization values, following the same scheme for
SCTLR_EL1 and SCTLR_EL2.
These definitions will be used more widely in subsequent patches.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201113124937.20574-5-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
For a while now el2_setup has performed some basic initialization of EL1
even when the kernel is booted at EL1, so the name is a little
misleading. Further, some comments are stale as with VHE it doesn't drop
the CPU to EL1.
To clarify things, rename el2_setup to init_kernel_el, and update
comments to be clearer as to the function's purpose.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201113124937.20574-4-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
To make callsites easier to read, add trivial C wrappers for the
SET_PSTATE_*() helpers, and convert trivial uses over to these. The new
wrappers will be used further in subsequent patches.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201113124937.20574-3-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
For consistency, all tasks have a pt_regs reserved at the highest
portion of their task stack. Among other things, this ensures that a
task's SP is always pointing within its stack rather than pointing
immediately past the end.
While it is never legitimate to ERET from a kthread, we take pains to
initialize pt_regs for kthreads as if this were legitimate. As this is
never legitimate, the effects of an erroneous return are rarely tested.
Let's simplify things by initializing a kthread's pt_regs such that an
ERET is caught as an illegal exception return, and removing the explicit
initialization of other exception context. Note that as
spectre_v4_enable_task_mitigation() only manipulates the PSTATE within
the unused regs this is safe to remove.
As user tasks will have their exception context initialized via
start_thread() or start_compat_thread(), this should only impact cases
where something has gone very wrong and we'd like that to be clearly
indicated.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20201113124937.20574-2-mark.rutland@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Registers x0/x1 get repeateadly pushed and poped during a host
HVC call. Instead, leave the registers on the stack, trading
a store instruction on the fast path for an add on the slow path.
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Move the setting of SSBS directly into the HVC handler, using
the C helpers rather than the inline asssembly code.
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Directly using the kimage_voffset variable is fine for now, but
will become more problematic as we start distrusting EL1.
Instead, patch the kimage_voffset into the HYP text, ensuring
we don't have to load an untrusted value later on.
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
When building with LTO, there is an increased risk of the compiler
converting an address dependency headed by a READ_ONCE() invocation
into a control dependency and consequently allowing for harmful
reordering by the CPU.
Ensure that such transformations are harmless by overriding the generic
READ_ONCE() definition with one that provides acquire semantics when
building with LTO.
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
In preparation for patching the internals of READ_ONCE() itself, replace
its usage on the alternatives patching patch with a volatile variable
instead.
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Armv8.3 introduced the LDAPR instruction, which provides weaker memory
ordering semantics than LDARi (RCpc vs RCsc). Generally, we provide an
RCsc implementation when implementing the Linux memory model, but LDAPR
can be used as a useful alternative to dependency ordering, particularly
when the compiler is capable of breaking the dependencies.
Since LDAPR is not available on all CPUs, add a cpufeature to detect it at
runtime and allow the instruction to be used with alternative code
patching.
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
asm/alternative.h contains both the macros needed to use alternatives,
as well the type definitions and function prototypes for applying them.
Split the header in two, so that alternatives can be used from core
header files such as linux/compiler.h without the risk of circular
includes
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The uao_* alternative asm macros are only used by the uaccess assembly
routines in arch/arm64/lib/, where they are included indirectly via
asm-uaccess.h. Since they're specific to the uaccess assembly (and will
lose the alternatives in subsequent patches), let's move them into
asm-uaccess.h.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
[will: update #include in mte.S to pull in uao asm macros]
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Now that we can use function pointer, use a dispatch table to call
the individual HVC handlers, leading to more maintainable code.
Further improvements include helpers to declare the mapping of
local variables to values passed in the host context.
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
KVM/arm64 is so far unable to deal with function pointers, as the compiler
will generate the kernel's runtime VA, and not the linear mapping address,
meaning that kern_hyp_va() will give the wrong result.
We so far have been able to use PC-relative addressing, but that's not
always easy to use, and prevents the implementation of things like
the mapping of an index to a pointer.
To allow this, provide a new helper that computes the required
translation from the kernel image to the HYP VA space.
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core documentation fixes from Greg KH:
"Some small Documentation fixes that were fallout from the larger
documentation update we did in 5.10-rc2.
Nothing major here at all, but all of these have been in linux-next
and resolve build warnings when building the documentation files"
* tag 'driver-core-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
Documentation: remove mic/index from misc-devices/index.rst
scripts: get_api.pl: Add sub-titles to ABI output
scripts: get_abi.pl: Don't let ABI files to create subtitles
docs: leds: index.rst: add a missing file
docs: ABI: sysfs-class-net: fix a typo
docs: ABI: sysfs-driver-dma-ioatdma: what starts with /sys
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are a small number of small tty and serial fixes for some
reported problems for the tty core, vt code, and some serial drivers.
They include fixes for:
- a buggy and obsolete vt font ioctl removal
- 8250_mtk serial baudrate runtime warnings
- imx serial earlycon build configuration fix
- txx9 serial driver error path cleanup issues
- tty core fix in release_tty that can be triggered by trying to bind
an invalid serial port name to a speakup console device
Almost all of these have been in linux-next without any problems, the
only one that hasn't, just deletes code :)"
* tag 'tty-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
vt: Disable KD_FONT_OP_COPY
tty: fix crash in release_tty if tty->port is not set
serial: txx9: add missing platform_driver_unregister() on error in serial_txx9_init
tty: serial: imx: enable earlycon by default if IMX_SERIAL_CONSOLE is enabled
serial: 8250_mtk: Fix uart_get_baud_rate warning
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes and new device ids:
- USB gadget fixes for some reported issues
- Fixes for the ever-troublesome apple fastcharge driver, hopefully
we finally have it right.
- More USB core quirks for odd devices
- USB serial driver fixes for some long-standing issues that were
recently found
- some new USB serial driver device ids
All have been in linux-next with no reported issues"
* tag 'usb-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: apple-mfi-fastcharge: fix reference leak in apple_mfi_fc_set_property
usb: mtu3: fix panic in mtu3_gadget_stop()
USB: serial: option: add Telit FN980 composition 0x1055
USB: serial: option: add LE910Cx compositions 0x1203, 0x1230, 0x1231
USB: serial: cyberjack: fix write-URB completion race
USB: Add NO_LPM quirk for Kingston flash drive
USB: serial: option: add Quectel EC200T module support
usb: raw-gadget: fix memory leak in gadget_setup
usb: dwc2: Avoid leaving the error_debugfs label unused
usb: dwc3: ep0: Fix delay status handling
usb: gadget: fsl: fix null pointer checking
usb: gadget: goku_udc: fix potential crashes in probe
usb: dwc3: pci: add support for the Intel Alder Lake-S
|
|
current->group_leader->exit_signal may change during copy_process() if
current->real_parent exits.
Move the assignment inside tasklist_lock to avoid the race.
Signed-off-by: Eddy Wu <eddy_wu@trendmicro.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
It's buggy:
On Fri, Nov 06, 2020 at 10:30:08PM +0800, Minh Yuan wrote:
> We recently discovered a slab-out-of-bounds read in fbcon in the latest
> kernel ( v5.10-rc2 for now ). The root cause of this vulnerability is that
> "fbcon_do_set_font" did not handle "vc->vc_font.data" and
> "vc->vc_font.height" correctly, and the patch
> <https://lkml.org/lkml/2020/9/27/223> for VT_RESIZEX can't handle this
> issue.
>
> Specifically, we use KD_FONT_OP_SET to set a small font.data for tty6, and
> use KD_FONT_OP_SET again to set a large font.height for tty1. After that,
> we use KD_FONT_OP_COPY to assign tty6's vc_font.data to tty1's vc_font.data
> in "fbcon_do_set_font", while tty1 retains the original larger
> height. Obviously, this will cause an out-of-bounds read, because we can
> access a smaller vc_font.data with a larger vc_font.height.
Further there was only one user ever.
- Android's loadfont, busybox and console-tools only ever use OP_GET
and OP_SET
- fbset documentation only mentions the kernel cmdline font: option,
not anything else.
- systemd used OP_COPY before release 232 published in Nov 2016
Now unfortunately the crucial report seems to have gone down with
gmane, and the commit message doesn't say much. But the pull request
hints at OP_COPY being broken
https://github.com/systemd/systemd/pull/3651
So in other words, this never worked, and the only project which
foolishly every tried to use it, realized that rather quickly too.
Instead of trying to fix security issues here on dead code by adding
missing checks, fix the entire thing by removing the functionality.
Note that systemd code using the OP_COPY function ignored the return
value, so it doesn't matter what we're doing here really - just in
case a lone server somewhere happens to be extremely unlucky and
running an affected old version of systemd. The relevant code from
font_copy_to_all_vcs() in systemd was:
/* copy font from active VT, where the font was uploaded to */
cfo.op = KD_FONT_OP_COPY;
cfo.height = vcs.v_active-1; /* tty1 == index 0 */
(void) ioctl(vcfd, KDFONTOP, &cfo);
Note this just disables the ioctl, garbage collecting the now unused
callbacks is left for -next.
v2: Tetsuo found the old mail, which allowed me to find it on another
archive. Add the link too.
Acked-by: Peilin Ye <yepeilin.cs@gmail.com>
Reported-by: Minh Yuan <yuanmingbuaa@gmail.com>
References: https://lists.freedesktop.org/archives/systemd-devel/2016-June/036935.html
References: https://github.com/systemd/systemd/pull/3651
Cc: Greg KH <greg@kroah.com>
Cc: Peilin Ye <yepeilin.cs@gmail.com>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://lore.kernel.org/r/20201108153806.3140315-1-daniel.vetter@ffwll.ch
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Pull xfs fixes from Darrick Wong:
- Fix an uninitialized struct problem
- Fix an iomap problem zeroing unwritten EOF blocks
- Fix some clumsy error handling when writeback fails on filesystems
with blocksize < pagesize
- Fix a retry loop not resetting loop variables properly
- Fix scrub flagging rtinherit inodes on a non-rt fs, since the kernel
actually does permit that combination
- Fix excessive page cache flushing when unsharing part of a file
* tag 'xfs-5.10-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: only flush the unshared range in xfs_reflink_unshare
xfs: fix scrub flagging rtinherit even if there is no rt device
xfs: fix missing CoW blocks writeback conversion retry
iomap: clean up writeback state logic on writepage error
iomap: support partial page discard on writeback block mapping failure
xfs: flush new eof page on truncate to avoid post-eof corruption
xfs: set xefi_discard when creating a deferred agfl free log intent item
|