| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
For a sake of code simplification, remove the init and the exit
entries that do nothing.
Notes for readers: actually it's OK to remove *both* init and exit,
but not OK to remove the exit entry. By removing only the exit while
keeping init, the module becomes permanently loaded; i.e. you cannot
unload it any longer!
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
For a sake of code simplification, remove the init and the exit
entries that do nothing.
Notes for readers: actually it's OK to remove *both* init and exit,
but not OK to remove the exit entry. By removing only the exit while
keeping init, the module becomes permanently loaded; i.e. you cannot
unload it any longer!
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
For a sake of code simplification, remove the init and the exit
entries that do nothing.
Notes for readers: actually it's OK to remove *both* init and exit,
but not OK to remove the exit entry. By removing only the exit while
keeping init, the module becomes permanently loaded; i.e. you cannot
unload it any longer!
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
For a sake of code simplification, remove the init and the exit
entries that do nothing.
Notes for readers: actually it's OK to remove *both* init and exit,
but not OK to remove the exit entry. By removing only the exit while
keeping init, the module becomes permanently loaded; i.e. you cannot
unload it any longer!
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
For a sake of code simplification, remove the init and the exit
entries that do nothing.
Notes for readers: actually it's OK to remove *both* init and exit,
but not OK to remove the exit entry. By removing only the exit while
keeping init, the module becomes permanently loaded; i.e. you cannot
unload it any longer!
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Trivial spelling mistake fix in debug message
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Addresses-Coverity-ID: 115075 ("Missing break in switch")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Addresses-Coverity-ID: 402016 ("Missing break in switch")
Addresses-Coverity-ID: 1056542 ("Missing break in switch")
Addresses-Coverity-ID: 1339579 ("Missing break in switch")
Addresses-Coverity-ID: 1369526 ("Missing break in switch")
Addresses-Coverity-ID: 1369529 ("Missing break in switch")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Addresses-Coverity-ID: 1165394 ("Missing break in switch")
Addresses-Coverity-ID: 1167851 ("Missing break in switch")
Addresses-Coverity-ID: 402015 ("Missing break in switch")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Addresses-Coverity-ID: 1468367 ("Missing break in switch")
Addresses-Coverity-ID: 115037 ("Missing break in switch")
Addresses-Coverity-ID: 115038 ("Missing break in switch")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
There was a typo of COPY_USER in the dead code (that is disabled
as default).
Fixes: 4b83eff81c81 ("ALSA: sb: Convert to the new PCM ops")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
sizeof() when applied to a pointer typed expression gives the
size of the pointer, not that of the pointed data.
Fixes: 7edf3b5e6a45 ("ALSA: usb-audio: AudioStreaming Power Domain parsing")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The old ugly macros remained in the code without usage.
Rip them off.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
All usages of mutex in ALSA sequencer core would take too long, hence
we don't have to care about the user interruption that makes things
complicated. Let's replace them with simpler mutex_lock().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The sequencer core module doesn't call some destructors in the error
path of the init code, which may leave some resources.
This patch mainly fix these leaks by calling the destructors
appropriately at alsa_seq_init(). Also the patch brings a few
cleanups along with it, namely:
- Expand the old "if ((err = xxx) < 0)" coding style
- Get rid of empty seq_queue_init() and its caller
- Change snd_seq_info_done() to void
Last but not least, a couple of functions lose __exit annotation since
they are called also in alsa_seq_init().
No functional changes but minor code cleanups.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
There are a few functions that have been commented out for ages.
And also there are functions that do nothing but placeholders.
Let's kill them.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
snd_midi_event_encode_byte() can never fail, and it can return rather
true/false. Change the return type to bool, adjust the argument to
receive a MIDI byte as unsigned char, and adjust the comment
accordingly. This allows callers to drop error checks, which
simplifies the code.
Meanwhile, snd_midi_event_encode() helper is used only in seq_midi.c,
and it can be better folded into it. This will reduce the total
amount of lines in the end.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Addresses-Coverity-ID: 115084 ("Missing break in switch")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Addresses-Coverity-ID: 1357375 ("Missing break in switch")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Pointer 'urb' is being assigned but is never used hence it is
redundant and can be removed.
Cleans up clang warning:
warning: variable 'urb' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Pointer 'dir' is being assigned but is never used hence it is
redundant and can be removed.
Cleans up clang warning:
warning: variable 'dir' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The array pcm_devs is being assigned but is never used hence it is
redundant and can be removed.
Cleans up clang warning:
warning: variable 'pcm_devs' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Variable attn is being assigned but is never used hence it is
redundant and can be removed.
Cleans up clang warning:
warning: variable 'attn' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Pointer 'dma' is being assigned but is never used hence it is
redundant and can be removed.
Cleans up two clang warnings:
warning: variable 'dma' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Variable max_streams is being assigned but is never used hence it is
redundant and can be removed.
Cleans up clang warning:
warning: variable 'max_streams' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Make use of UAC3 Power Domains associated to an Audio Streaming
path within the PCM's logic. This means, when there is no audio
being transferred (pcm is closed), the host will set the Power Domain
associated to that substream to state D1. When audio is being transferred
(from hw_params onwards), the Power Domain will be set to D0 state.
This is the way the host lets the device know which Terminal
is going to be actively used and it is for the device to
manage its own internal resources on that UAC3 Power Domain.
Note the resume method now sets the Power Domain to D1 state as
resuming the device doesn't mean audio streaming will occur.
Signed-off-by: Jorge Sanjuan <jorge.sanjuan@codethink.co.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Set the UAC3 Power Domain state for an Audio Streaming interface
to D2 state before suspending the device (usb_driver callback).
This lets the device know there is no intention to use any of the
Units in the Audio Function and that the host is not going to
even listen for wake-up events (interrupts) on the units.
When the usb_driver gets resumed, the state D0 (fully powered) will
be set. This ties up the UAC3 Power Domains to the runtime PM.
Signed-off-by: Jorge Sanjuan <jorge.sanjuan@codethink.co.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Power Domains in the UAC3 spec are mainly intended to be
associated to an Input or Output Terminal so the host
changes the power state of the entire capture or playback
path within the topology.
This patch adds support for finding Power Domains associated
to an Audio Streaming Interface (bTerminalLink) and adds a
reference to them in the usb audio substreams (snd_usb_substream).
Signed-off-by: Jorge Sanjuan <jorge.sanjuan@codethink.co.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Thee USB Audio Class 3 (UAC3) introduces Power Domains as a new
feature to let a host turn individual parts of an audio function
to different power states via USB requests. This lets the device
get to know a bit amore about what the host is up to in order to
optimize power consumption efficiently.
The Power Domains are optional for UAC3 configuration but all
UAC3 devices shall include at least one BADD configuration where
the support for Power Domains is compulsory.
This patch adds a set of features/helpers to parse these power
domains and change their status.
Signed-off-by: Jorge Sanjuan <jorge.sanjuan@codethink.co.uk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The trigger flag in vmidi object can be referred in different contexts
concurrently, hence it's better to be put with READ_ONCE() and
WRITE_ONCE() macros to assure the accesses.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The virmidi sequencer stuff tries to translate the rawmidi bytes to
sequencer events and deliver the packets at trigger callback. The
amount of the whole process of these translations and deliveries
depends on the incoming rawmidi bytes, and we have no limit for that;
this was the cause of a CPU soft lockup that had been reported and
fixed recently.
Although we've fixed the soft lockup by putting the temporary unlock
and cond_resched(), it's rather a quick band aid. In this patch,
meanwhile, the event parsing and delivery process is offloaded to a
dedicated work, and the trigger callback just kicks it off. It has
three merits, at least:
- The processing is always done in a sleepable context, which can
assure the event delivery with non-atomic flag without hackish
is_atomic() usage.
- Other relevant codes can be simplified, reducing the lines
- It makes me happier
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Pull the latest ALSA sequencer fixes for the further development of
virmidi.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Instead of calling mutex_unlock() at each error path multiple times,
take the standard goto-and-a-single-unlock approach. This will
simplify the code and make easier to find the unbalanced mutex locks.
No functional changes, but only the code readability improvement as a
preliminary work for further changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
On rare occasions, we are still noticing that the internal speaker
spitting out spurious noises even after adding the problematic codec
to the list.
Adding a 10ms artificial delay before rebooting fixes the issue entirely.
Patch for Realtek codecs also adds the same amount of delay after
entering D3.
Signed-off-by: Park Ju Hyung <qkrwngud825@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
As an equivalent codec with CX20724,
CX8200 is also subject to the reboot bug.
Late 2017 and 2018 LG Gram and some HP Spectre laptops are known victims
to this issue, causing extremely loud noises upon reboot.
Now that we know that this bug is subject to multiple codecs,
fix the comment as well.
Signed-off-by: Park Ju Hyung <qkrwngud825@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
hw_pll_init(), hw_dac_stop(), hw_dac_start() and hw_adc_init()
are never called in atomic context.
They call mdelay() to busily wait, which is not necessary.
mdelay() can be replaced with msleep().
This is found by a static analysis tool named DCNS written by myself.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
hw_pll_init(), hw_reset_dac() and hw_card_init() are never
called in atomic context.
They calls mdelay() to busily wait, which is not necessary.
mdelay() can be replaced with msleep().
This is found by a static analysis tool named DCNS written by myself.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
snd_usb_select_mode_quirk(), snd_usb_set_interface_quirk() and
snd_usb_ctl_msg_quirk() are never called in atomic context.
They call mdelay() to busily wait, which is not necessary.
mdelay() can be replaced with msleep() and usleep_range().
This is found by a static analysis tool named DCNS written by myself.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The data types defined in SB CSP driver code are all in little-endian,
hence the proper type like __le32 should be used.
Spotted by sparse, a warning like:
sound/isa/sb/sb16_csp.c:330:14: warning: cast to restricted __le32
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The DMA address table in atiixp modem driver is in little-endian,
hence we should define it with __le32 properly.
Spotted by sparse, a warning like:
sound/pci/atiixp_modem.c:360:28: warning: incorrect type in assignment (different base types)
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The DMA address table in atiixp driver is in little-endian, hence we should define it with __le32 properly.
Spotted by sparse, a warning like:
sound/pci/atiixp.c:393:28: warning: incorrect type in assignment (different base types)
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The RISC data in bt87x is in little-endian, hence we should define it
with __le32 properly.
Spotted by sparse, a warning like:
sound/pci/bt87x.c:240:17: warning: incorrect type in assignment (different base types)
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Many data fields defined in echoaudio drivers are in little-endian,
hence they should be defined with __le16 or __le32. This makes it
easier to catch the forgotten conversions.
Spotted by sparse, a warning like:
sound/pci/echoaudio/echoaudio_dsp.c:990:36: warning: incorrect type in assignment (different base types)
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The ASSP data passed to maestro3 driver is in little-endian format,
hence the data pointer should be with __le16.
Spotted by sparse, warnings like:
sound/pci/maestro3.c:2128:35: warning: cast to restricted __le16
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The BD address tables in intel8x0m driver are in little-endian, hence
they should be represented as __le32 instead u32.
Spotted by sparse, warnings like:
sound/pci/intel8x0m.c:406:40: warning: incorrect type in assignment (different base types)
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The BD address tables in intel8x0 driver are in little-endian, hence
they should be represented as __le32 instead u32.
Spotted by sparse, warnings like:
sound/pci/intel8x0.c:688:40: warning: incorrect type in assignment (different base types)
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The BDL entries in lola driver are little-endian while we code them as
u32. This leads to sparse warnings like:
sound/pci/lola/lola.c:105:40: warning: incorrect type in assignment (different base types)
sound/pci/lola/lola.c:105:40: expected unsigned int [unsigned] [usertype] <noident>
sound/pci/lola/lola.c:105:40: got restricted __le32 [usertype] <noident>
This patch fixes the declarations to the proper __le32 type.
Also, there was a typo in the original code, where __user was used
that was intended as __iomem. This was caused also by sparse:
sound/pci/lola/lola_mixer.c:132:27: warning: incorrect type in assignment (different address spaces)
Fixed in this patch as well.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The miXart driver deals with big-endian values as raw data, while it
declares most of variables as u32. This leads to sparse warnings like
sound/pci/mixart/mixart.c:1203:23: warning: cast to restricted __be32
Fix them by properly defining the structs and add the explicit cast to
macros.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The SG descriptor of Riptide contains the little-endian values, hence
we need to define with __le32 properly. This fixes sparse warnings
like:
sound/pci/riptide/riptide.c:1112:40: warning: cast to restricted __le32
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The BDL pointer used in snd_hdac_dsp_prepare() should be declared as
__le32, as warned by sparse:
sound/hda/hdac_stream.c:655:47: warning: incorrect type in argument 4 (different base types)
sound/hda/hdac_stream.c:655:47: expected restricted __le32 [usertype] **bdlp
sound/hda/hdac_stream.c:655:47: got unsigned int [usertype] **<noident>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
