summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2009-03-09ASoC: Add a driver for AK4104 S/PDIF transmitterDaniel Mack4-0/+376
This adds a driver for the SPI connected AK4104 S/PDIF transmitter device. Its features are fairly simple, but as there is need to set up certain bits in the IEC958 information, this better goes into a real driver. Signed-off-by: Daniel Mack <daniel@caiaq.de> Cc: Mark Brown <broonie@sirena.org.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-08ASoC: Remove unneeded forward reference to WM8753 SPI implementationMark Brown1-5/+0
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-08ASoC: bring cs4270 feature/limitations list in syncDaniel Mack1-8/+7
Removes numbers from the list of features/limitations and makes it reflect recent changes to the code. Signed-off-by: Daniel Mack <daniel@caiaq.de> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-07ASoC: Improve pause/unpause performance in Freescale 8610 driversTimur Tabi2-10/+16
Add support for true pause and unpause. Without this, mplayer will drop some audio (less than one second, but still noticeable) when pausing playback. Remove support for PM suspend and resume from the trigger function, since the driver doesn't support PM anyway. Optimize the delay after starting capture. Instead of delaying 1ms, the driver now polls the hardware. The new delay is shorter by over 90% yet still effective. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-07ASoC: Davinci: Fix incorrect machine type for SFFSDR boardHugo Villeneuve1-1/+1
Signed-off-by: Hugo Villeneuve <hugo@hugovil.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-06ASoC: Fix logging severity for some S3C error messagesMark Brown3-3/+3
Upgrade the severity of some failure messages from debug level so they're displayed by default. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-06ASoC: Re-remove hand-rolled pr_debug() macrosMark Brown5-117/+82
The recent set of S3C64xx patches re-added a lot of uses of DBG() that had previously been removed - revert this so the standard pr_debug() macro is used. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-06ASoC: Staticise workqueue function for GPIO jack detectionMark Brown1-1/+1
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-06ASoC: Blackfin: fix typo in MUTE definitionMike Frysinger1-1/+1
Reported-by: Rob Maris <maris.rob@vdi.de> Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-06ASoC: Blackfin: move gpio_err behind the define that is only user of itMike Frysinger1-1/+1
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-06ASoC: Add headset jack detection for SDP3430 machine driverLopez Cruz, Misael1-2/+41
Add headset jack detection for SDP3430 boards using SoC jack reporting interface. Headset detection on SDP3430 board is achieved through TWL4030 GPIO_2 pin. Signed-off-by: Misael Lopez Cruz <x0052729@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-06ASoC: add support for SSI asynchronous mode to the Freescale SSI driversTimur Tabi3-10/+39
Add a new device tree property for the SSI node: "fsl,ssi-asynchronous". If defined, the SSI is programmed into asynchronous mode, otherwise it is programmed into synchronous mode. In asynchronous mode, pin SRCK must be connected to the same clock source as STFS, and pin SRFS must be connected to the same signal as STFS. Asynchronous mode allows playback and capture to use different sample sizes. It also technically allows different sample rates, but the driver does not support that. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-06ASoC: Update Kconfig for Samsung CPUs to reflect S3C64xx supportMark Brown1-3/+3
We now support the 64xx series as well as the 24xx series - make sure people using Kconfig know this. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-06ASoC: Fix memory allocation for snd_soc_dapm_switch namesMark Brown1-4/+3
snd_soc_dapm_switch ends up ends up in dapm_new_mixer() (since a switch is a special case of a mixer with only one input) but this wasn't correctly handled in the code. Also fix the coding style for the switch below while we're here. Reported-by: Joonyoung Shim <dofmind@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-06ASoC: add two more bitfields for PXA SSPDaniel Mack1-0/+5
Add two more bitfields for the PSP register. As they seem to exist for PXA3xx only, define them conditionally. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-06ASoC: Factor out DAPM widget power check into separate functionMark Brown1-121/+137
Essentially simple code motion to facilitate refactoring of the power decisions. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-06ASoC: Fix name of register bit in pxa-sspDaniel Mack2-4/+4
A bit in PXA's SSCR0 register was erroneously named ADC but its name is in fact ACS (audio clock select). Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-06ASoC: TWL4030: Make the HS ramp delay configurablePeter Ujfalusi1-4/+14
Enum type for selecting the desired ramp delay for the headset output. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-06ASoC: Refresh JIVE driverMark Brown1-21/+6
Remove uneeded startup callback and use snd_soc_dapm_nc_pin() Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-06ASoC: Select DMA if I2S is configuredBen Dooks1-0/+4
Select the relevant DMA implementation when the sound driver is selected. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-06ASoC: Add s3c64xx-i2s supportBen Dooks5-1/+261
Add the initial code to support the S3C64XX I2S hardware using the s3c-i2s-v2 core code. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-06ASoC: Split s3c2412-i2s.c into core and SoC specific partsBen Dooks7-593/+767
The S3C2412 I2S (IIS) interface is replicated on further Samsung SoC parts in a broadly compatible way, so split the common code out into a core called s3c-i2s-v2.[ch] so that the newer SoCs such as the S3C6410 can make use of it. As such, all the original s3c2412 functions are currently being left with their original names, and will be renamed later in the series. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-06ASoC: Add JIVE audio supportBen Dooks3-0/+227
Add support for the Jive's WM8750 codec attached via the S3C2412 IIS. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-06ASoC: Add DAPM machine widgets to SDP3430 driverLopez Cruz, Misael1-0/+64
Add DAPM machine domain widgets to SDP3430 machine driver. Interconnection: * Ext Mic: MAINMIC, SUBMIC * Ext Spk: HFL, HFR * Headset Jack: HSMIC, HSOL, HSOR Signed-off-by: Misael Lopez Cruz <x0052729@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-06Merge commit 's3c-iis-header' into HEADMark Brown17-22/+18
2009-03-05S3C: Move <mach/audio.h> to <plat/audio.h>Ben Dooks6-5/+5
The <mach/audio.h> file needs to be common to both ARCH_S3C2410 and ARCH_S3C64XX as they share common driver code, so move it to <plat/audio.h>. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-05S3C24XX: Move and update IIS headersBen Dooks14-17/+13
Move the IIS headers to their correct place. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-04ASoC: wm8510 pll settingsJonas Andersson2-14/+14
When setting WM8510_MCLKDIV the pll was turned off. When setting pll frequency you got twice the expected freq, because the code calculated with postscaler of 8, but the hardware divide by 4. Signed-off-by: Jonas Andersson <jonas@microbit.se> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-04ASoC: Add GPIO support for jack reporting interfaceLopez Cruz, Misael2-0/+161
Add GPIO support to jack reporting framework in ASoC using gpiolib calls. The gpio support exports two new functions: snd_soc_jack_add_gpios and snd_soc_jack_free_gpios. Client drivers using gpio feature must pass an array of jack_gpio pins belonging to a specific jack to the snd_soc_jack_add_gpios function. The framework will request the gpios, set the data direction and request irq. The framework will update power status of related jack_pins when an event on the gpio pins comes according to the reporting bits defined for each gpio. All gpio resources allocated when adding jack_gpio pins can be released using snd_soc_jack_free_gpios function. Signed-off-by: Misael Lopez Cruz <x0052729@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-03ASoC: UDA1380: DATAI is slave onlyPhilipp Zabel1-2/+7
Only allow SND_SOC_DAIFMT_CBS_CFS for the playback DAI. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-03ASoC: Use network mode with 2 slots for 16-bit stereo in pxa-ssp/ZylonitePhilipp Zabel2-4/+6
For consistency with 24-bit and 32-bit modes, don't send 16-bit stereo in one 32-bit transfer. Use 2 slots instead on Zylonite. It should result in exactly the same behaviour. Now it is possible to use 16-bit single slot transfers in pxa-ssp, which are needed for Magician to get two frame clock pulses per sample (one for each channel). Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Tested-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-03ASoC: UDA1380: change decimator/interpolator register handlingPhilipp Zabel1-54/+48
If the UDA1380's interpolator or decimator are set to be clocked from the WSPLL (which syncs to the WSI signal), the DAI link must be running to change the interpolator/decimator registers (which include volume controls and digital mute setting). * Queue work in the alsa PCM_START .trigger to flush registers as soon as the link is running. This replaces the .prepare and .digital_mute callbacks. * Use the SILENCE override instead of MTM for muting and remove its alsa control to avoid confusion. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-03ASoC: Remove version display from the UDA1380 driverPhilipp Zabel1-4/+0
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-03-02ASoC: fix typo and removed unneeded switch case for cs4270Daniel Mack1-3/+1
This removes a misspelled comment and got rid of superfluous switch case. Signed-off-by: Daniel Mack <daniel@caiaq.de> Acked-by: Timur Tabi <timur@freescale.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-02-28ASoC: Add SND_SOC_DAPM_PIN_SWITCH controls for exposing DAPM pinsMark Brown2-0/+82
On some systems it is desirable for control for DAPM pins to be provided to user space. This is the case with things like GSM modems which are controlled primarily from user space, for example. Provide a helper which exposes the state of a DAPM pin to user space for use in cases like this. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-02-28ASoC: Add cs4270 support for slave mode configurationsDaniel Mack1-1/+23
Added support for scenarios where the Cirrus CS4270 audio codec is slave to the bitclk and lrclk. Mixed setups are unsupported. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-02-28ASoC: Fix copyright statements on Simtec filesBen Dooks2-2/+2
Fix the copyright statements in two of the S3C24XX ASoC files that have (c) when we require the full word. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-02-26ASoC: wm8753 - Fix build errorTakashi Iwai1-1/+2
sound/soc/codecs/wm8753.c: In function 'wm8753_probe': sound/soc/codecs/wm8753.c:1577: error: implicit declaration of function 'wm8753_add_controls' Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-24ASoC: Only write back non-default registers when resuming WM8753Mark Brown1-0/+5
This will reduce the number of writes done on resume, allowing that to complete faster (especially on systems with very slow I2C like the current Samsung driver). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-02-24ASoC: Convert WM8753 to register via normal device probeMark Brown3-210/+171
The base support for the only in-tree user, the GTA01, is out of tree and will be updated separately. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-02-24ASoC: Shuffle WM8753 device registration codeMark Brown1-104/+105
This patch should be pure code motion, separating that out from the functional changes to move to new style device registration. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-02-24ASoC: Fix Zylonite voice interface stereo configurationsMark Brown1-3/+2
We always run in the first timeslot of one. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-02-24ASoC: Improve WM9713 voice DAC shutdown procedureMark Brown1-3/+4
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-02-22ASoC: Only unregister drivers we registered for WM8753Mark Brown1-3/+7
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-02-22ASoC: Report I/O errors from WM8753 resetMark Brown1-1/+5
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-02-19ASoC: Disable WM8731 line bypass by defaultMark Brown1-0/+4
This avoids temporarily enabling the ouput stages during startup which can cause audible effets in the output stages. Reported-by: Fredrik Redgård <rik@svep.se> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-02-18ASoC: Add device init/exit annotations to new-style Wolfson CODEC driversMark Brown4-13/+13
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-02-18ASoC: Check for errors when writing WM8731 reset registerMark Brown1-1/+6
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-02-18ASoC: TWL4030: Add digital loopback supportPeter Ujfalusi1-6/+50
This patch adds the digital loopback/bypass support for twl4030 codec. The digital loopback will let the digimic0 (routed in the TX1 capture path inside of TWL4030) data to be routed back to the RX2 playback path (I2S stereo). It can also route the analog capture date routed through the TX1 back to RX2. Effectively the digital loopback is routing the audio from the TX1 capture path to the RX2 playback path. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-02-18ASoC: Implement SPI device unregistration for WM8731Mark Brown1-1/+6
Completely untested. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-20 07:38:14 +0000