summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2014-08-28jbd2: fix descriptor block size handling errors with journal_csumDarrick J. Wong6-49/+95
It turns out that there are some serious problems with the on-disk format of journal checksum v2. The foremost is that the function to calculate descriptor tag size returns sizes that are too big. This causes alignment issues on some architectures and is compounded by the fact that some parts of jbd2 use the structure size (incorrectly) to determine the presence of a 64bit journal instead of checking the feature flags. Therefore, introduce journal checksum v3, which enlarges the descriptor block tag format to allow for full 32-bit checksums of journal blocks, fix the journal tag function to return the correct sizes, and fix the jbd2 recovery code to use feature flags to determine 64bitness. Add a few function helpers so we don't have to open-code quite so many pieces. Switching to a 16-byte block size was found to increase journal size overhead by a maximum of 0.1%, to convert a 32-bit journal with no checksumming to a 32-bit journal with checksum v3 enabled. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reported-by: TR Reardon <thomas_reardon@hotmail.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
2014-08-28jbd2: fix infinite loop when recovering corrupt journal blocksDarrick J. Wong1-2/+5
When recovering the journal, don't fall into an infinite loop if we encounter a corrupt journal block. Instead, just skip the block and return an error, which fails the mount and thus forces the user to run a full filesystem fsck. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
2014-08-28ext4: update i_disksize coherently with block allocation on error pathDmitry Monakhov1-2/+8
In case of delalloc block i_disksize may be less than i_size. So we have to update i_disksize each time we allocated and submitted some blocks beyond i_disksize. We weren't doing this on the error paths, so fix this. testcase: xfstest generic/019 Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
2014-08-28dm crypt: fix access beyond the end of allocated spaceMikulas Patocka1-6/+19
The DM crypt target accesses memory beyond allocated space resulting in a crash on 32 bit x86 systems. This bug is very old (it dates back to 2.6.25 commit 3a7f6c990ad04 "dm crypt: use async crypto"). However, this bug was masked by the fact that kmalloc rounds the size up to the next power of two. This bug wasn't exposed until 3.17-rc1 commit 298a9fa08a ("dm crypt: use per-bio data"). By switching to using per-bio data there was no longer any padding beyond the end of a dm-crypt allocated memory block. To minimize allocation overhead dm-crypt puts several structures into one block allocated with kmalloc. The block holds struct ablkcipher_request, cipher-specific scratch pad (crypto_ablkcipher_reqsize(any_tfm(cc))), struct dm_crypt_request and an initialization vector. The variable dmreq_start is set to offset of struct dm_crypt_request within this memory block. dm-crypt allocates the block with this size: cc->dmreq_start + sizeof(struct dm_crypt_request) + cc->iv_size. When accessing the initialization vector, dm-crypt uses the function iv_of_dmreq, which performs this calculation: ALIGN((unsigned long)(dmreq + 1), crypto_ablkcipher_alignmask(any_tfm(cc)) + 1). dm-crypt allocated "cc->iv_size" bytes beyond the end of dm_crypt_request structure. However, when dm-crypt accesses the initialization vector, it takes a pointer to the end of dm_crypt_request, aligns it, and then uses it as the initialization vector. If the end of dm_crypt_request is not aligned on a crypto_ablkcipher_alignmask(any_tfm(cc)) boundary the alignment causes the initialization vector to point beyond the allocated space. Fix this bug by calculating the variable iv_size_padding and adding it to the allocated size. Also correct the alignment of dm_crypt_request. struct dm_crypt_request is specific to dm-crypt (it isn't used by the crypto subsystem at all), so it is aligned on __alignof__(struct dm_crypt_request). Also align per_bio_data_size on ARCH_KMALLOC_MINALIGN, so that it is aligned as if the block was allocated with kmalloc. Reported-by: Krzysztof Kolasa <kkolasa@winsoft.pl> Tested-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2014-08-28Merge tag 'backlight-fixes-3.17' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight Pull backlight fix from Lee Jones: "One simple fix to invalidate GPIO non-request" * tag 'backlight-fixes-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: pwm-backlight: Fix bogus request for GPIO#0 when instantiated from DT
2014-08-28Merge tag 'mfd-fixes-3.17' of ↵Linus Torvalds6-14/+121
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull mfd fixes from Lee Jones: "Couple of simple fixes due for the 3.17 rcs (and a sneaky document addition that slipped from the previous pull-request)" * tag 'mfd-fixes-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: mfd: twl4030-power: Fix PM idle pin configuration to not conflict with regulators mfd: tc3589x: Add device tree bindings mfd: ab8500-core: Use 'ifdef' for config options mfd: htc-i2cpld: Fix %d confusingly prefixed with 0x in format string mfd: omap-usb-host: Fix %d confusingly prefixed with 0x in format string
2014-08-28Merge tag 'pinctrl-v3.17-2' of ↵Linus Torvalds8-23/+84
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin-control fixes from Linus Walleij: "My first (a bit delayed) pack of pin control fixes for the v3.17 series, only driver fixes: - SH-PFC (Renesas) r8a7791 CAN bus pin group problem - Rockchip (GPIO0 configuration) - Tegra-xusb (interrupt handling) - Exynos (GPIO interrupt locking) - Qualcomm (fix misleading example interrupts) - minor non-critical fixes for abx500 and AT91 also sneaked in, because I initially intended this pull for post RC-1, hope it's still OK" * tag 'pinctrl-v3.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: qcom: apq8064: Correct interrupts in example pinctrl: exynos: Lock GPIOs as interrupts when used as EINTs pinctrl: pinctrl-at91.c: fix decimal printf format specifiers prefixed with 0x pinctrl: abx500: remove useless check pinctrl: tegra-xusb: testing wrong variable in probe() pinctrl: tegra-xusb: fix an off by one test pinctrl: rockchip: fix rk3288 gpio0 configuration sh-pfc: r8a7791: fix CAN pin groups
2014-08-28Merge tag 'for-3.17-rc3' of ↵Linus Torvalds3-7/+10
git://git.kernel.org/pub/scm/linux/kernel/git/sumits/dma-buf Pull dma-buf fixes from Sumit Semwal: "The major changes for 3.17 already went via Greg-KH's tree this time as well; this is a small pull request for dma-buf - all documentation related" * tag 'for-3.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/sumits/dma-buf: dma-buf/fence: Fix one more kerneldoc warning dma-buf/fence: Fix a kerneldoc warning Documentation/dma-buf-sharing.txt: update API descriptions
2014-08-28Merge tag 'sound-3.17-rc3' of ↵Linus Torvalds5-8/+24
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Here contains not many exciting changes but just a few minor ones: An off-by-one proc write fix, a couple of trivial incldue guard fixes, Acer laptop pinconfig fix, and a fix for DSD formats that are still rarely used" * tag 'sound-3.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Set up initial pins for Acer Aspire V5 ALSA: pcm: Fix the silence data for DSD formats ALSA: ctxfi: ct20k1reg: Fix typo in include guard ALSA: hda: ca0132_regs.h: Fix typo in include guard ALSA: core: fix buffer overflow in snd_info_get_line()
2014-08-28Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds18-65/+92
Pull drm fixes from Dave Airlie: "Nothing major, one core oops fixes, some radeon oops fixes, some sti driver fixups, msm driver fixes and a minor Kconfig update for the ww mutex debugging" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/ast: Add missing entry to dclk_table[] drm: fix division-by-zero on dumb_create() ww-mutex: clarify help text for DEBUG_WW_MUTEX_SLOWPATH radeon: Test for PCI root bus before assuming bus->self drm/radeon: handle broken disabled rb mask gracefully (6xx/7xx) (v2) drm/radeon: save/restore the PD addr on suspend/resume drm/msm: Fix missing unlock on error in msm_fbdev_create() drm/msm: fix compile error for non-dt builds drm/msm/mdp4: request vblank during modeset drm/msm: avoid flood of kernel logs on faults drm: sti: Add missing dependency on RESET_CONTROLLER drm: sti: Make of_device_id array const drm: sti: Fix return value check in sti_drm_platform_probe() drm: sti: hda: fix return value check in sti_hda_probe() drm: sti: hdmi: fix return value check in sti_hdmi_probe() drm: sti: tvout: fix return value check in sti_tvout_probe()
2014-08-28mfd: twl4030-power: Fix PM idle pin configuration to not conflict with ↵Tony Lindgren2-11/+11
regulators Commit 43fef47f94a1 (mfd: twl4030-power: Add a configuration to turn off oscillator during off-idle) added support for configuring the PMIC to cut off resources during deeper idle states to save power. This however caused regression for n900 display power that needed the PMIC configuration to be disabled with commit d937678ab625 (ARM: dts: Revert enabling of twl configuration for n900). Turns out the root cause of the problem is that we must use TWL4030_RESCONFIG_UNDEF instead of DEV_GRP_NULL to avoid disabling regulators that may have been enabled before the init function for twl4030-power.c runs. With TWL4030_RESCONFIG_UNDEF we let the regulator framework control the regulators like it should. Here we need to only configure the sys_clken and sys_off_mode triggers for the regulators that cannot be done by the regulator framework as it's not running at that point. This allows us to enable the PMIC configuration for n900. Fixes: 43fef47f94a1 (mfd: twl4030-power: Add a configuration to turn off oscillator during off-idle) Cc: stable@vger.kernel.org # v3.16 Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-08-28mfd: tc3589x: Add device tree bindingsLinus Walleij1-0/+107
This defines the device tree bindings for the Toshiba TC3589x series of multi-purpose expanders. Only the stuff I can test is defined: GPIO and keypad. Others may implement more subdevices further down the road. This is to complement commit a435ae1d51e2f18414f2a87219fdbe068231e692 "mfd: Enable the tc3589x for Device Tree" which left off the definition of the device tree bindings. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-08-28cfq-iosched: Add comments on update timing of weightToshiaki Makita1-0/+8
Explain that weight has to be updated on activation. This complements previous fix e15693ef18e1 ("cfq-iosched: Fix wrong children_weight calculation"). Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-08-28dma-buf/fence: Fix one more kerneldoc warningThierry Reding1-0/+1
The seqno_fence_init() function's cond argument isn't described in the kerneldoc comment. Fix that to silence a warning when building DocBook documentation. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
2014-08-28dma-buf/fence: Fix a kerneldoc warningThierry Reding1-1/+1
kerneldoc doesn't know how to parse variables, so don't let it try. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
2014-08-28Documentation/dma-buf-sharing.txt: update API descriptionsGioh Kim1-6/+8
Update some descriptions for API arguments and descriptions. Signed-off-by: Gioh Kim <gioh.kim@lge.com> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
2014-08-28drm/ast: Add missing entry to dclk_table[]Y.C. Chen1-0/+1
This avoid reading past the end of the list for certain modes Signed-off-by: Y.C. Chen <yc_chen@aspeedtech.com> Reviewed-by: Egbert Eich <eich@freedesktop.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-08-28Merge branch 'drm-3.17-rc2-sti-fixes' of ↵Dave Airlie5-15/+16
git://git.linaro.org/people/benjamin.gaignard/kernel into drm-fixes I have tested the 6 patches send on mailing list since you merge the sti driver. I haven't seen issue with those patches except for the missing dependency on Kconfig where I have change "depends on" to "select". * 'drm-3.17-rc2-sti-fixes' of git://git.linaro.org/people/benjamin.gaignard/kernel: drm: sti: Add missing dependency on RESET_CONTROLLER drm: sti: Make of_device_id array const drm: sti: Fix return value check in sti_drm_platform_probe() drm: sti: hda: fix return value check in sti_hda_probe() drm: sti: hdmi: fix return value check in sti_hdmi_probe() drm: sti: tvout: fix return value check in sti_tvout_probe()
2014-08-28Merge branch 'msm-fixes-3.17' of ↵Dave Airlie4-5/+6
git://people.freedesktop.org/~robclark/linux into drm-fixes misc msm fixes from Rob. * 'msm-fixes-3.17' of git://people.freedesktop.org/~robclark/linux: drm/msm: Fix missing unlock on error in msm_fbdev_create() drm/msm: fix compile error for non-dt builds drm/msm/mdp4: request vblank during modeset drm/msm: avoid flood of kernel logs on faults
2014-08-28drm: fix division-by-zero on dumb_create()David Herrmann1-1/+2
Kinda unexpected, but DIV_ROUND_UP() can overflow if passed an argument bigger than UINT_MAX - DIVISOR. Fix this by testing for "!cpp" before using it in the following division. Note that DIV_ROUND_UP() is defined as: #define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d)) ..this will obviously overflow if (n + d - 1) is bigger than UINT_MAX. Reported-by: Tommi Rantala <tt.rantala@gmail.com> Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-08-28ww-mutex: clarify help text for DEBUG_WW_MUTEX_SLOWPATHRob Clark1-0/+4
We really don't want distro's enabling this in their kernels. Try and make that more clear. Signed-off-by: Rob Clark <robdclark@gmail.com> Acked-by: Maarten Lankhorst <maarten.lankhorst@canonical.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-08-28Merge branch 'drm-fixes-3.17' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie6-44/+63
into drm-fixes Just a few more radeon fixes for 3.17. * 'drm-fixes-3.17' of git://people.freedesktop.org/~agd5f/linux: radeon: Test for PCI root bus before assuming bus->self drm/radeon: handle broken disabled rb mask gracefully (6xx/7xx) (v2) drm/radeon: save/restore the PD addr on suspend/resume
2014-08-27Merge branch 'sec-v3.17-rc2' of ↵Linus Torvalds1-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/sergeh/linux-security Pull tomoyo fix from Serge Hallyn. * 'sec-v3.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/sergeh/linux-security: tomoyo: Fix pathname calculation breakage.
2014-08-27ext4: fix transaction issues for ext4_fallocate and ext_zero_rangeDmitry Monakhov1-33/+35
After commit f282ac19d86f we use different transactions for preallocation and i_disksize update which result in complain from fsck after power-failure. spotted by generic/019. IMHO this is regression because fs becomes inconsistent, even more 'e2fsck -p' will no longer works (which drives admins go crazy) Same transaction requirement applies ctime,mtime updates testcase: xfstest generic/019 Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
2014-08-27ext4: fix incorect journal credits reservation in ext4_zero_rangeDmitry Monakhov1-2/+9
Currently we reserve only 4 blocks but in worst case scenario ext4_zero_partial_blocks() may want to zeroout and convert two non adjacent blocks. Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
2014-08-27radeon: Test for PCI root bus before assuming bus->selfAlex Williamson2-2/+10
If we assign a Radeon device to a virtual machine, we can no longer assume a fixed hardware topology, like the GPU having a parent device. This patch simply adds a few pci_is_root_bus() tests to avoid passing a NULL pointer to PCI access functions, allowing the radeon driver to work in a QEMU 440FX machine with an assigned HD8570 on the emulated PCI root bus. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-08-27Merge branch 'for-linus' of ↵Linus Torvalds4-18/+42
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid Pull HID fixes from Jiri Kosina: - fixes for potential memory corruption problems in magicmouse and picolcd drivers (the HW would have to be manufactured to be deliberately evil to trigger those) which were found by Steven Vittitoe - fix for false error message appearing in dmesg from logitech-dj driver, from Benjamin Tissoires * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: picolcd: sanity check report size in raw_event() callback HID: magicmouse: sanity check report size in raw_event() callback HID: logitech-dj: prevent false errors to be shown
2014-08-27Merge branch 'for-linus' of ↵Linus Torvalds17-135/+312
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fixes from Chris Mason: "The biggest of these comes from Liu Bo, who tracked down a hang we've been hitting since moving to kernel workqueues (it's a btrfs bug, not in the generic code). His patch needs backporting to 3.16 and 3.15 stable, which I'll send once this is in. Otherwise these are assorted fixes. Most were integrated last week during KS, but I wanted to give everyone the chance to test the result, so I waited for rc2 to come out before sending" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: (24 commits) Btrfs: fix task hang under heavy compressed write Btrfs: fix filemap_flush call in btrfs_file_release Btrfs: fix crash on endio of reading corrupted block btrfs: fix leak in qgroup_subtree_accounting() error path btrfs: Use right extent length when inserting overlap extent map. Btrfs: clone, don't create invalid hole extent map Btrfs: don't monopolize a core when evicting inode Btrfs: fix hole detection during file fsync Btrfs: ensure tmpfile inode is always persisted with link count of 0 Btrfs: race free update of commit root for ro snapshots Btrfs: fix regression of btrfs device replace Btrfs: don't consider the missing device when allocating new chunks Btrfs: Fix wrong device size when we are resizing the device Btrfs: don't write any data into a readonly device when scrub Btrfs: Fix the problem that the replace destroys the seed filesystem btrfs: Return right extent when fiemap gives unaligned offset and len. Btrfs: fix wrong extent mapping for DirectIO Btrfs: fix wrong write range for filemap_fdatawrite_range() Btrfs: fix wrong missing device counter decrease Btrfs: fix unzeroed members in fs_devices when creating a fs from seed fs ...
2014-08-27Merge tag 'trace-fixes-v3.17-rc1-2' of ↵Linus Torvalds1-1/+15
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull trace buffer epoll hang fix from Steven Rostedt: "Josef Bacik found a bug in the ring_buffer_poll_wait() where the condition variable (waiters_pending) was set before being added to the poll queue via poll_wait(). This allowed for a small race window to happen where an event could come in, check the condition variable see it set to true, clear it, and then wake all the waiters. But because the waiter set the variable before adding itself to the queue, the waker could have cleared the variable after it was set and then miss waking it up as it wasn't added to the queue yet. Discussing this bug, we realized that a memory barrier needed to be added too, for the rare case that something polls for a single trace event to happen (and just one, no more to come in), and miss the wakeup due to memory ordering. Ideally, a memory barrier needs to be added on the writer side too, but as that will kill tracing performance and this is for a situation that tracing wasn't even designed for (who traces one instance of an event, use a printk instead!), this isn't worth adding the barrier. But we can in the future add the barrier for when the buffer goes from empty to the first event, as that would cover this case" * tag 'trace-fixes-v3.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: trace: Fix epoll hang when we race with new entries
2014-08-27HID: picolcd: sanity check report size in raw_event() callbackJiri Kosina1-0/+6
The report passed to us from transport driver could potentially be arbitrarily large, therefore we better sanity-check it so that raw_data that we hold in picolcd_pending structure are always kept within proper bounds. Cc: stable@vger.kernel.org Reported-by: Steven Vittitoe <scvitti@google.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-08-27HID: magicmouse: sanity check report size in raw_event() callbackJiri Kosina1-0/+10
The report passed to us from transport driver could potentially be arbitrarily large, therefore we better sanity-check it so that magicmouse_emit_touch() gets only valid values of raw_id. Cc: stable@vger.kernel.org Reported-by: Steven Vittitoe <scvitti@google.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2014-08-27ALSA: hda - Set up initial pins for Acer Aspire V5Takashi Iwai1-0/+18
Acer Aspire V5 doesn't set up the pins correctly at the cold boot while the pins are corrected after the warm reboot. This patch gives the proper pin configs statically in the driver as a workaround. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=81561 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-08-26tomoyo: Fix pathname calculation breakage.Tetsuo Handa1-2/+3
Commit 7177a9c4b509 ("fs: call rename2 if exists") changed "struct inode_operations"->rename == NULL if "struct inode_operations"->rename2 != NULL . TOMOYO needs to check for both ->rename and ->rename2 , or a system on (e.g.) ext4 filesystem won't boot. Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>
2014-08-26Merge branch 'for-linus' of ↵Linus Torvalds7-5/+54
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Martin Schwidefsky: - wire up the system calls seccomp, getrandom and memfd_create - use static system information as input to add_device_randomness - .. and three bug fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/sclp: remove unnecessary XTABS flag s390/3215: fix tty output containing tabs s390: wire up memfd_create syscall s390: add system information as device randomness s390/kdump: Clear subchannel ID to signal non-CCW/SCSI IPL s390: wire up seccomp and getrandom syscalls
2014-08-26Documentation: this_cpu_ops.txt: Update description of this_cpu_opsPranith Kumar1-42/+171
Update the description for per cpu operations to clarify use cases of this_cpu operations and add considerations for remote access. Signed-off-by: Pranith Kumar <bobby.prani@gmail.com> Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-26scripts/kernel-doc: recognize __meminitRandy Dunlap1-0/+1
Fix scripts/kernel-doc to recognize __meminit in a function prototype and to strip it, as done with many other attributes. Fixes this warning: Warning(..//mm/page_alloc.c:2973): cannot understand function prototype: 'void * __meminit alloc_pages_exact_nid(int nid, size_t size, gfp_t gfp_mask) ' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-26drm/radeon: handle broken disabled rb mask gracefully (6xx/7xx) (v2)Alex Deucher2-33/+16
This is a port of cedb655a3a7764c3fd946077944383c9e0e68dd4 to older asics. Fixes a possible divide by 0 if the harvest register is invalid. v2: drop some additional harvest munging. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2014-08-26drm/radeon: save/restore the PD addr on suspend/resumeChristian König4-9/+37
This fixes a problem with GPU resets and TLB flushes on SI/CIK. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2014-08-26cfq-iosched: Fix wrong children_weight calculationToshiaki Makita1-3/+8
cfq_group_service_tree_add() is applying new_weight at the beginning of the function via cfq_update_group_weight(). This actually allows weight to change between adding it to and subtracting it from children_weight, and triggers WARN_ON_ONCE() in cfq_group_service_tree_del(), or even causes oops by divide error during vfr calculation in cfq_group_service_tree_add(). The detailed scenario is as follows: 1. Create blkio cgroups X and Y as a child of X. Set X's weight to 500 and perform some I/O to apply new_weight. This X's I/O completes before starting Y's I/O. 2. Y starts I/O and cfq_group_service_tree_add() is called with Y. 3. cfq_group_service_tree_add() walks up the tree during children_weight calculation and adds parent X's weight (500) to children_weight of root. children_weight becomes 500. 4. Set X's weight to 1000. 5. X starts I/O and cfq_group_service_tree_add() is called with X. 6. cfq_group_service_tree_add() applies its new_weight (1000). 7. I/O of Y completes and cfq_group_service_tree_del() is called with Y. 8. I/O of X completes and cfq_group_service_tree_del() is called with X. 9. cfq_group_service_tree_del() subtracts X's weight (1000) from children_weight of root. children_weight becomes -500. This triggers WARN_ON_ONCE(). 10. Set X's weight to 500. 11. X starts I/O and cfq_group_service_tree_add() is called with X. 12. cfq_group_service_tree_add() applies its new_weight (500) and adds it to children_weight of root. children_weight becomes 0. Calcularion of vfr triggers oops by divide error. weight should be updated right before adding it to children_weight. Reported-by: Ruki Sekiya <sekiya.ruki@lab.ntt.co.jp> Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Acked-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@fb.com>
2014-08-26drm/msm: Fix missing unlock on error in msm_fbdev_create()Wei Yongjun1-1/+1
Add the missing unlock before return from function msm_fbdev_create() in the error handling case. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Rob Clark <robdclark@gmail.com>
2014-08-26drm/msm: fix compile error for non-dt buildsRob Clark1-2/+1
Signed-off-by: Rob Clark <robdclark@gmail.com>
2014-08-26drm/msm/mdp4: request vblank during modesetRob Clark1-0/+2
This avoids a problem seen with weston (for example) where the display gets stuck in "black screen" if starting weston first thing after boot. Possibly mdp5 needs something similar. The downstream android fbdev driver always requests DMA_E (or DMA_P) when display is active, rather than only enabling it on-demand as the drm driver does, which I believe has the same end result. Signed-off-by: Rob Clark <robdclark@gmail.com>
2014-08-26drm/msm: avoid flood of kernel logs on faultsRob Clark1-2/+2
87e956e9 changed the fault handler to return -ENOSYS, which causes the iommu driver to print out a huge splat. Which wouldn't be quite so bad if nothing ever faulted. But seems like some EXA composite operations generate quite a lot of (seemingly harmless) faults. That is probably a userspace problem, but the huge increase in verbosity from iommu fault dumps makes things kind of unusable. We probably should actually log *some* message (not conditional on drm.debug). But ratelimit it. Signed-off-by: Rob Clark <robdclark@gmail.com>
2014-08-26block: fix error handling in sg_ioSabrina Dubroca1-0/+1
Before commit 2cada584b200 ("block: cleanup error handling in sg_io"), we had ret = 0 before entering the last big if block of sg_io. Since 2cada584b200, ret = -EFAULT, which breaks hdparm: /dev/sda: setting Advanced Power Management level to 0xc8 (200) HDIO_DRIVE_CMD failed: Bad address APM_level = 128 Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Fixes: 2cada584b200 ("block: cleanup error handling in sg_io") Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-08-26drm: sti: Add missing dependency on RESET_CONTROLLERJingoo Han1-0/+1
Add missing dependency on RESET_CONTROLLER in order to fix the following build error. drivers/gpu/drm/sti/sti_hdmi.c: In function 'sti_hdmi_probe' drivers/gpu/drm/sti/sti_hdmi.c:780:2: error: implicit declaration of function 'devm_reset_control_get' [-Werror=implicit-function-declaration] Benjamin Gaignard remark: I have change "depends on" to "select" but keep the original author name. Signed-off-by: Jingoo Han <jg1.han@samsung.com>
2014-08-26drm: sti: Make of_device_id array constKiran Padwal3-3/+3
Make of_device_id array const, because all OF functions handle it as const. Signed-off-by: Kiran Padwal <kiran.padwal@smartplayin.com>
2014-08-26drm: sti: Fix return value check in sti_drm_platform_probe()Wei Yongjun1-2/+2
In case of error, the function platform_device_register_resndata() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
2014-08-26drm: sti: hda: fix return value check in sti_hda_probe()Wei Yongjun1-4/+4
In case of error, the function devm_ioremap_nocache() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
2014-08-26drm: sti: hdmi: fix return value check in sti_hdmi_probe()Wei Yongjun1-4/+4
In case of error, the function devm_ioremap_nocache() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
2014-08-26drm: sti: tvout: fix return value check in sti_tvout_probe()Wei Yongjun1-2/+2
In case of error, the function devm_ioremap_nocache() returns NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check should be replaced with NULL test. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-08 19:57:32 +0000