summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2011-08-24udlfb: Enable fb_defio by defaultBernie Thompson2-10/+18
Enables page fault based detection of mmap writes to the framebuffer, which allows standard fbdev apps (like the generic fbdev xorg driver) to work on DisplayLink devices. Not all bugs are shaken out of the fb_defio path of udlfb, but it's tantalizingly close, so this seems a good time to enable by default. Alternatively, option can be disabled when running with an xorg driver that can more directly communicate damaged regions of the framebuffer via IOCTL. This is a simpler, higher perf option, when available. Signed-off-by: Bernie Thompson <bernie@plugable.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2011-08-24udlfb: Add module option to do without shadow framebufferStuart Hopkins2-2/+13
By default, udlfb allocates a 2nd buffer to shadow what's across the bus on the USB device. It can operate without this shadow, but then it cannot tell which pixels have changed, and must send all. Saves host memory, but worsens the USB 2.0 bus bottleneck. This option allows users in very low memory situations (e.g. bifferboard) to optionally turn off this shadow framebuffer. Signed-off-by: Stuart Hopkins <stuart@linux-depot.com> Signed-off-by: Bernie Thompson <bernie@plugable.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2011-08-24udlfb: fix issues found with Sparse static analysisDr. David Alan Gilbert1-14/+16
Add __user casting, a missing copy_from_user, and proper boolean Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Signed-off-by: Bernie Thompson <bernie@plugable.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2011-08-24udlfb: Search config descriptor if not at device levelAndrew Kephart1-5/+16
For at least one DisplayLink device, the vendor-specific information can be found in the config descriptor instead of as a separate, device-level descriptor. This patch searches the current interface (of the current config descriptor) for the DL vendor-specific descriptor. Signed-off-by: Andrew Kephart <akephart@akephart.org> Signed-off-by: Bernie Thompson <bernie@plugable.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2011-08-24udlfb: add more comprehensive support for DPMS FB_BLANK_* modesBernie Thompson2-24/+74
Fixes earlier problems where monitor would not return from blank Test with any DisplayLink-based USB 2.0 graphics adapter sudo nano /sys/class/graphics/fb?/blank and write out single digit FB_BLANK_* code from include/linux/fb.h Supports on (0), blank (1), suspend (2,3), powerdown (4) Signed-off-by: Bernie Thompson <bernie@plugable.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2011-08-24Merge branch 'pan-fixes' of git://linuxtv.org/pinchartl/fbdev into fbdev-nextFlorian Tobias Schandinat28-106/+92
2011-08-22Linux 3.1-rc3v3.1-rc3Linus Torvalds1-2/+2
2011-08-22Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds6-8/+26
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf tools: Add group event scheduling option to perf record/stat MAINTAINERS: Fix list of perf events source files perf tools: Fix build against newer glibc perf tools: Fix error handling of unknown events perf evlist: Fix missing event name init for default event perf list: Fix exit value
2011-08-22Merge branch 'stable/bug.fixes' of ↵Linus Torvalds5-11/+15
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen * 'stable/bug.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/tracing: Fix tracing config option properly xen: Do not enable PV IPIs when vector callback not present xen/x86: replace order-based range checking of M2P table by linear one xen: xen-selfballoon.c needs more header files
2011-08-22xen/tracing: Fix tracing config option properlyJeremy Fitzhardinge1-1/+1
Steven Rostedt says we should use CONFIG_EVENT_TRACING. Cc:Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-08-22xen: Do not enable PV IPIs when vector callback not presentStefano Stabellini1-2/+2
Fix regression for HVM case on older (<4.1.1) hypervisors caused by commit 99bbb3a84a99cd04ab16b998b20f01a72cfa9f4f Author: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Date: Thu Dec 2 17:55:10 2010 +0000 xen: PV on HVM: support PV spinlocks and IPIs This change replaced the SMP operations with event based handlers without taking into account that this only works when the hypervisor supports callback vectors. This causes unexplainable hangs early on boot for HVM guests with more than one CPU. BugLink: http://bugs.launchpad.net/bugs/791850 CC: stable@kernel.org Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Tested-and-Reported-by: Stefan Bader <stefan.bader@canonical.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-08-21Merge branch 'fixes' of ↵Linus Torvalds1-5/+10
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: core: handle ack_busy when fetching the Config ROM
2011-08-21Btrfs: fix 64 bit divide problemJosef Bacik1-5/+7
This fixes a regression introduced by commit cdcb725c05fe ("Btrfs: check if there is enough space for balancing smarter"). We can't do 64-bit divides on 32-bit architectures. In cases where we need to divide/multiply by 2 we should just left/right shift respectively, and in cases where theres N number of devices use do_div. Also make the counters u64 to match up with rw_devices. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com> Acked-and-tested-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-21Merge branch 'for_linus' of ↵Linus Torvalds5-9/+37
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: flush any pending end_io requests before DIO reads w/dioread_nolock ext4: fix nomblk_io_submit option so it correctly converts uninit blocks ext4: Resolve the hang of direct i/o read in handling EXT4_IO_END_UNWRITTEN. ext4: call ext4_ioend_wait and ext4_flush_completed_IO in ext4_evict_inode ext4: Fix ext4_should_writeback_data() for no-journal mode
2011-08-21Merge branch 'for-linus' of ↵Linus Torvalds9-39/+76
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: sound/aoa/fabrics/layout.c: remove unneeded kfree ALSA: hda - Fix error check from snd_hda_get_conn_index() in patch_cirrus.c ALSA: hda - Don't spew too many ELD errors ALSA: usb-audio - Fix missing mixer dB information ALSA: hda - Add "PCM" volume to vmaster slave list ALSA: hda - Fix duplicated capture-volume creation for ALC268 models ALSA: ac97: Add HP Compaq dc5100 SFF(PT003AW) to Headphone Jack Sense whitelist ALSA: snd_usb_caiaq: track submitted output urbs
2011-08-20pci: fix new kernel-doc warning in pci.cRandy Dunlap1-1/+1
Fix new kernel-doc warning in pci.c: Warning(drivers/pci/pci.c:3259): No description found for parameter 'mps' Warning(drivers/pci/pci.c:3259): Excess function parameter 'rq' description in 'pcie_set_mps' Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-08-20ALSA: sound/aoa/fabrics/layout.c: remove unneeded kfreeJulia Lawall1-1/+1
The label outnodev is only used when kzalloc has not yet taken place or has failed, so there is no need for the call for kfree under this label. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier x; expression E1!=0,E2,E3,E4; statement S; iterator I; @@ ( if (...) { ... when != kfree(x) when != x = E3 when != E3 = x * return ...; } ... when != x = E2 when != I(...,x,...) S if (...) { ... when != x = E4 kfree(x); ... return ...; } ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-20ALSA: hda - Fix error check from snd_hda_get_conn_index() in patch_cirrus.cTakashi Iwai1-3/+5
snd_hda_get_conn_index() returns a negative value while the current code stores it in an unsigned int. It must be stored in a signed integer. Reported-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-20ALSA: hda - Don't spew too many ELD errorsTakashi Iwai1-12/+19
Currently HD-audio driver shows the all error ELD byte as an error in the kernel message. This is annoying when the video driver doesn't set the correct ELD from the beginning. e.g. radeon sends a zero-byte data, but we still check ELD with the fixed 128 byte as a workaround for some broken devices, it spews 128-times errors. For avoiding this, the driver aborts reading when the first byte is invalid. In such a case, the whole data is certainly invalid. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-08-19Merge branch 'for-linus' of ↵Linus Torvalds2-0/+8
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/drm-intel * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/drm-intel: drm/i915: set GFX_MODE to pre-Ivybridge default value even on Ivybridge
2011-08-19ext4: flush any pending end_io requests before DIO reads w/dioread_nolockJiaying Zhang1-2/+7
There is a race between ext4 buffer write and direct_IO read with dioread_nolock mount option enabled. The problem is that we clear PageWriteback flag during end_io time but will do uninitialized-to-initialized extent conversion later with dioread_nolock. If an O_direct read request comes in during this period, ext4 will return zero instead of the recently written data. This patch checks whether there are any pending uninitialized-to-initialized extent conversion requests before doing O_direct read to close the race. Note that this is just a bandaid fix. The fundamental issue is that we clear PageWriteback flag before we really complete an IO, which is problem-prone. To fix the fundamental issue, we may need to implement an extent tree cache that we can use to look up pending to-be-converted extents. Signed-off-by: Jiaying Zhang <jiayingz@google.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: stable@kernel.org
2011-08-19drm/i915: set GFX_MODE to pre-Ivybridge default value even on IvybridgeJesse Barnes2-0/+8
Prior to Ivybridge, the GFX_MODE would default to 0x800, meaning that MI_FLUSH would flush the TLBs in addition to the rest of the caches indicated in the MI_FLUSH command. However starting with Ivybridge, the register defaults to 0x2800 out of reset, meaning that to invalidate the TLB we need to use PIPE_CONTROL. Since we're not doing that yet, go back to the old default so things work. v2: don't forget to actually *clear* the new bit Reviewed-by: Eric Anholt <eric@anholt.net> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: Kenneth Graunke <kenneth@whitecape.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-08-19Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds26-135/+800
* 'for-linus' of git://git.kernel.dk/linux-block: (23 commits) Revert "cfq: Remove special treatment for metadata rqs." block: fix flush machinery for stacking drivers with differring flush flags block: improve rq_affinity placement blktrace: add FLUSH/FUA support Move some REQ flags to the common bio/request area allow blk_flush_policy to return REQ_FSEQ_DATA independent of *FLUSH xen/blkback: Make description more obvious. cfq-iosched: Add documentation about idling block: Make rq_affinity = 1 work as expected block: swim3: fix unterminated of_device_id table block/genhd.c: remove useless cast in diskstats_show() drivers/cdrom/cdrom.c: relax check on dvd manufacturer value drivers/block/drbd/drbd_nl.c: use bitmap_parse instead of __bitmap_parse bsg-lib: add module.h include cfq-iosched: Reduce linked group count upon group destruction blk-throttle: correctly determine sync bio loop: fix deadlock when sysfs and LOOP_CLR_FD race against each other loop: add BLK_DEV_LOOP_MIN_COUNT=%i to allow distros 0 pre-allocated loop devices loop: add management interface for on-demand device allocation loop: replace linked list of allocated devices with an idr index ...
2011-08-19Merge branch 'for-linus' of ↵Linus Torvalds9-153/+454
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: OF: Don't crash when bridge parent is NULL. PCI: export pcie_bus_configure_settings symbol PCI: code and comments cleanup PCI: make cardbus-bridge resources optional PCI: make SRIOV resources optional PCI : ability to relocate assigned pci-resources PCI: honor child buses add_size in hot plug configuration PCI: Set PCI-E Max Payload Size on fabric
2011-08-19PCI: OF: Don't crash when bridge parent is NULL.David Daney1-1/+1
In pcibios_get_phb_of_node(), we will crash while booting if bus->bridge->parent is NULL. Check for this case and avoid dereferencing the NULL pointer. Signed-off-by: David Daney <david.daney@cavium.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-08-19staging: xgifb: use display information in info not in var for panningLaurent Pinchart1-16/+6
We must not use any information in the passed var besides xoffset, yoffset and vmode as otherwise applications might abuse it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2011-08-19vt8623fb: use display information in info not in var for panningLaurent Pinchart1-4/+5
We must not use any information in the passed var besides xoffset, yoffset and vmode as otherwise applications might abuse it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2011-08-19vt8500lcdfb: use display information in info not in var for panningLaurent Pinchart1-2/+2
We must not use any information in the passed var besides xoffset, yoffset and vmode as otherwise applications might abuse it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2011-08-19vga16fb: use display information in info not in var for panningLaurent Pinchart1-1/+1
We must not use any information in the passed var besides xoffset, yoffset and vmode as otherwise applications might abuse it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2011-08-19vfb: use display information in info not in var for panningLaurent Pinchart1-2/+2
We must not use any information in the passed var besides xoffset, yoffset and vmode as otherwise applications might abuse it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2011-08-19tridentfb: use display information in info not in var for panningLaurent Pinchart1-2/+2
We must not use any information in the passed var besides xoffset, yoffset and vmode as otherwise applications might abuse it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2011-08-19sm501fb: use display information in info not in var for panningLaurent Pinchart1-3/+3
We must not use any information in the passed var besides xoffset, yoffset and vmode as otherwise applications might abuse it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2011-08-19sisfb: use display information in info not in var for panningLaurent Pinchart1-20/+10
We must not use any information in the passed var besides xoffset, yoffset and vmode as otherwise applications might abuse it. Fix checkpatch.pl warnings in the surrounding code. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2011-08-19savagefb: use display information in info not in var for panningLaurent Pinchart1-9/+7
We must not use any information in the passed var besides xoffset, yoffset and vmode as otherwise applications might abuse it. Also use the aligned fix.line_length and not the (possible) unaligned xres_virtual. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Tormod Volden <debian.tormod@gmail.com>
2011-08-19s3fb: use display information in info not in var for panningLaurent Pinchart1-3/+4
We must not use any information in the passed var besides xoffset, yoffset and vmode as otherwise applications might abuse it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2011-08-19s3c-fb: use display information in info not in var for panningLaurent Pinchart1-1/+1
We must not use any information in the passed var besides xoffset, yoffset and vmode as otherwise applications might abuse it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Jingoo Han <jg1.han@samsung.com>
2011-08-19pm3fb: use display information in info not in var for panningLaurent Pinchart1-2/+2
We must not use any information in the passed var besides xoffset, yoffset and vmode as otherwise applications might abuse it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2011-08-19pm2fb: use display information in info not in var for panningLaurent Pinchart1-2/+2
We must not use any information in the passed var besides xoffset, yoffset and vmode as otherwise applications might abuse it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2011-08-19neofb: use display information in info not in var for panningLaurent Pinchart1-2/+2
We must not use any information in the passed var besides xoffset, yoffset and vmode as otherwise applications might abuse it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2011-08-19mx3fb: use display information in info not in var for panningLaurent Pinchart1-3/+3
We must not use any information in the passed var besides xoffset, yoffset and vmode as otherwise applications might abuse it. Also use the aligned fix.line_length and not the (possible) unaligned xres_virtual. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
2011-08-19mb862xxfb: use display information in info not in var for panningLaurent Pinchart1-1/+1
We must not use any information in the passed var besides xoffset, yoffset and vmode as otherwise applications might abuse it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2011-08-19intelfb: use display information in info not in var for panningLaurent Pinchart1-3/+3
We must not use any information in the passed var besides xoffset, yoffset and vmode as otherwise applications might abuse it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2011-08-19imsttfb: use display information in info not in var for panningLaurent Pinchart1-1/+1
We must not use any information in the passed var besides xoffset, yoffset and vmode as otherwise applications might abuse it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2011-08-19hgafb: use display information in info not in var for panningLaurent Pinchart1-2/+2
We must not use any information in the passed var besides xoffset, yoffset and vmode as otherwise applications might abuse it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2011-08-19gxt4500: use display information in info not in var for panningLaurent Pinchart1-2/+2
We must not use any information in the passed var besides xoffset, yoffset and vmode as otherwise applications might abuse it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2011-08-19g364fb: use display information in info not in var for panningLaurent Pinchart1-2/+3
We must not use any information in the passed var besides xoffset, yoffset and vmode as otherwise applications might abuse it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2011-08-19fbdev: unicore32: use display information in info not in var for panningLaurent Pinchart1-2/+2
We must not use any information in the passed var besides xoffset, yoffset and vmode as otherwise applications might abuse it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Guan Xuetao <gxt@mprc.pku.edu.cn> Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
2011-08-19fbdev: da8xx: use display information in info not in var for panningLaurent Pinchart1-2/+2
We must not use any information in the passed var besides xoffset, yoffset and vmode as otherwise applications might abuse it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2011-08-19radeonfb: use display information in info not in var for panningLaurent Pinchart1-5/+5
We must not use any information in the passed var besides xoffset, yoffset and vmode as otherwise applications might abuse it. Also use the aligned fix.line_length and not the (possible) unaligned xres_virtual. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2011-08-19atmel_lcdfb: use display information in info not in var for panningLaurent Pinchart1-6/+9
We must not use any information in the passed var besides xoffset, yoffset and vmode as otherwise applications might abuse it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Reviewed-by: Wolfram Sang <w.sang@pengutronix.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-22 01:55:22 +0000