summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2021-01-07selftests: netfilter: add selftest for ipip pmtu discovery with enabled ↵Florian Westphal2-1/+208
connection tracking Convert Christians bug description into a reproducer. Cc: Shuah Khan <shuah@kernel.org> Reported-by: Christian Perle <christian.perle@secunet.com> Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07docs: octeontx2: tune rst markupLukas Bulwahn1-26/+36
Commit 80b9414832a1 ("docs: octeontx2: Add Documentation for NPA health reporters") added new documentation with improper formatting for rst, and caused a few new warnings for make htmldocs in octeontx2.rst:169--202. Tune markup and formatting for better presentation in the HTML view. Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: George Cherian <george.cherian@marvell.com> Link: https://lore.kernel.org/r/20210106161735.21751-1-lukas.bulwahn@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07tools: selftests: add test for changing routes with PTMU exceptionsSean Tranchetti1-2/+69
Adds new 2 new tests to the PTMU script: pmtu_ipv4/6_route_change. These tests explicitly test for a recently discovered problem in the IPv6 routing framework where PMTU exceptions were not properly released when replacing a route via "ip route change ...". After creating PMTU exceptions, the route from the device A to R1 will be replaced with a new route, then device A will be deleted. If the PMTU exceptions were properly cleaned up by the kernel, this device deletion will succeed. Otherwise, the unregistration of the device will stall, and messages such as the following will be logged in dmesg: unregister_netdevice: waiting for veth_A-R1 to become free. Usage count = 4 Signed-off-by: Sean Tranchetti <stranche@codeaurora.org> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/1609892546-11389-2-git-send-email-stranche@quicinc.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07net: ipv6: fib: flush exceptions when purging routeSean Tranchetti1-3/+2
Route removal is handled by two code paths. The main removal path is via fib6_del_route() which will handle purging any PMTU exceptions from the cache, removing all per-cpu copies of the DST entry used by the route, and releasing the fib6_info struct. The second removal location is during fib6_add_rt2node() during a route replacement operation. This path also calls fib6_purge_rt() to handle cleaning up the per-cpu copies of the DST entries and releasing the fib6_info associated with the older route, but it does not flush any PMTU exceptions that the older route had. Since the older route is removed from the tree during the replacement, we lose any way of accessing it again. As these lingering DSTs and the fib6_info struct are holding references to the underlying netdevice struct as well, unregistering that device from the kernel can never complete. Fixes: 2b760fcf5cfb3 ("ipv6: hook up exception table to store dst cache") Signed-off-by: Sean Tranchetti <stranche@codeaurora.org> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/1609892546-11389-1-git-send-email-stranche@quicinc.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07Merge tag 'linux-can-fixes-for-5.11-20210107' of ↵Jakub Kicinski5-40/+11
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2021-01-07 The first patch is by me for the m_can driver and removes an erroneous m_can_clk_stop() from the driver's unregister function. The second patch targets the tcan4x5x driver, is by me, and fixes the bit timing constant parameters. The next two patches are by me, target the mcp251xfd driver, and fix a race condition in the optimized TEF path (which was added in net-next for v5.11). The similar code in the RX path is changed to look the same, although it doesn't suffer from the race condition. A patch by Lad Prabhakar updates the description and help text for the rcar CAN driver to reflect all supported SoCs. In the last patch Sriram Dash transfers the maintainership of the m_can driver to Pankaj Sharma. * tag 'linux-can-fixes-for-5.11-20210107' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: MAINTAINERS: Update MCAN MMIO device driver maintainer can: rcar: Kconfig: update help description for CAN_RCAR config can: mcp251xfd: mcp251xfd_handle_rxif_ring(): first increment RX tail pointer in HW, then in driver can: mcp251xfd: mcp251xfd_handle_tefif(): fix TEF vs. TX race condition can: tcan4x5x: fix bittiming const, use common bittiming from m_can driver can: m_can: m_can_class_unregister(): remove erroneous m_can_clk_stop() ==================== Link: https://lore.kernel.org/r/20210107103451.183477-1-mkl@pengutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07MAINTAINERS: Update MCAN MMIO device driver maintainerSriram Dash1-1/+1
Update Pankaj Sharma as maintainer for mcan mmio device driver as I will be moving to a different role. Signed-off-by: Sriram Dash <sriram.dash@samsung.com> Acked-by: Pankaj Sharma <pankj.sharma@samsung.com> Link: https://lore.kernel.org/r/20210104123134.16930-1-sriram.dash@samsung.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-01-07can: rcar: Kconfig: update help description for CAN_RCAR configLad Prabhakar1-2/+2
The rcar_can driver also supports RZ/G SoC's, update the description to reflect this. Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20210104090327.6547-1-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-01-07can: mcp251xfd: mcp251xfd_handle_rxif_ring(): first increment RX tail ↵Marc Kleine-Budde1-4/+4
pointer in HW, then in driver The previous patch fixes a TEF vs. TX race condition, by first updating the TEF tail pointer in hardware, and then updating the driver internal pointer. The same pattern exists in the RX-path, too. This should be no problem, as the driver accesses the RX-FIFO from the interrupt handler only, thus the access is properly serialized. Fix the order here, too, so that the TEF- and RX-path look similar. Fixes: 1f652bb6bae7 ("can: mcp25xxfd: rx-path: reduce number of SPI core requests to set UINC bit") Link: https://lore.kernel.org/r/20210105214138.3150886-3-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-01-07can: mcp251xfd: mcp251xfd_handle_tefif(): fix TEF vs. TX race conditionMarc Kleine-Budde1-5/+4
The mcp251xfd driver uses a TX FIFO for sending CAN frames and a TX Event FIFO (TEF) for completed TX-requests. The TEF event handling in the mcp251xfd_handle_tefif() function has a race condition. It first increments the tx-ring's tail counter to signal that there's room in the TX and TEF FIFO, then it increments the TEF FIFO in hardware. A running mcp251xfd_start_xmit() on a different CPU might not stop the txqueue (as the tx-ring still shows free space). The next mcp251xfd_start_xmit() will push a message into the chip and the TX complete event might overflow the TEF FIFO. This patch changes the order to fix the problem. Fixes: 68c0c1c7f966 ("can: mcp251xfd: tef-path: reduce number of SPI core requests to set UINC bit") Link: https://lore.kernel.org/r/20210105214138.3150886-2-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-01-07can: tcan4x5x: fix bittiming const, use common bittiming from m_can driverMarc Kleine-Budde1-26/+0
According to the TCAN4550 datasheet "SLLSF91 - DECEMBER 2018" the tcan4x5x has the same bittiming constants as a m_can revision 3.2.x/3.3.0. The tcan4x5x chip I'm using identifies itself as m_can revision 3.2.1, so remove the tcan4x5x specific bittiming values and rely on the values in the m_can driver, which are selected according to core revision. Fixes: 5443c226ba91 ("can: tcan4x5x: Add tcan4x5x driver to the kernel") Cc: Dan Murphy <dmurphy@ti.com> Reviewed-by: Sean Nyekjaer <sean@geanix.com> Link: https://lore.kernel.org/r/20201215103238.524029-3-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-01-07can: m_can: m_can_class_unregister(): remove erroneous m_can_clk_stop()Marc Kleine-Budde1-2/+0
In m_can_class_register() the clock is started, but stopped on exit. When calling m_can_class_unregister(), the clock is stopped a second time. This patch removes the erroneous m_can_clk_stop() in m_can_class_unregister(). Fixes: f524f829b75a ("can: m_can: Create a m_can platform framework") Cc: Dan Murphy <dmurphy@ti.com> Cc: Sriram Dash <sriram.dash@samsung.com> Reviewed-by: Sean Nyekjaer <sean@geanix.com> Link: https://lore.kernel.org/r/20201215103238.524029-2-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-01-06ptp: ptp_ines: prevent build when HAS_IOMEM is not setRandy Dunlap1-0/+1
ptp_ines.c uses devm_platform_ioremap_resource(), which is only built/available when CONFIG_HAS_IOMEM is enabled. CONFIG_HAS_IOMEM is not enabled for arch/s390/, so builds on S390 have a build error: s390-linux-ld: drivers/ptp/ptp_ines.o: in function `ines_ptp_ctrl_probe': ptp_ines.c:(.text+0x17e6): undefined reference to `devm_platform_ioremap_resource' Prevent builds of ptp_ines.c when HAS_IOMEM is not set. Fixes: bad1eaa6ac31 ("ptp: Add a driver for InES time stamping IP core.") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Link: lore.kernel.org/r/202101031125.ZEFCUiKi-lkp@intel.com Acked-by: Richard Cochran <richardcochran@gmail.com> Link: https://lore.kernel.org/r/20210106042531.1351-1-rdunlap@infradead.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-06net: dsa: fix led_classdev build errorsRandy Dunlap1-0/+1
Fix build errors when LEDS_CLASS=m and NET_DSA_HIRSCHMANN_HELLCREEK=y. This limits the latter to =m when LEDS_CLASS=m. microblaze-linux-ld: drivers/net/dsa/hirschmann/hellcreek_ptp.o: in function `hellcreek_ptp_setup': (.text+0xf80): undefined reference to `led_classdev_register_ext' microblaze-linux-ld: (.text+0xf94): undefined reference to `led_classdev_register_ext' microblaze-linux-ld: drivers/net/dsa/hirschmann/hellcreek_ptp.o: in function `hellcreek_ptp_free': (.text+0x1018): undefined reference to `led_classdev_unregister' microblaze-linux-ld: (.text+0x1024): undefined reference to `led_classdev_unregister' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Link: lore.kernel.org/r/202101060655.iUvMJqS2-lkp@intel.com Cc: Kurt Kanzenbach <kurt@linutronix.de> Link: https://lore.kernel.org/r/20210106021815.31796-1-rdunlap@infradead.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-06net: bareudp: add missing error handling for bareudp_link_config()Jakub Kicinski1-8/+14
.dellink does not get called after .newlink fails, bareudp_newlink() must undo what bareudp_configure() has done if bareudp_link_config() fails. v2: call bareudp_dellink(), like bareudp_dev_create() does Fixes: 571912c69f0e ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.") Link: https://lore.kernel.org/r/20210105190725.1736246-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-06net: mvneta: fix error message when MTU too large for XDPMarek Behún1-1/+1
The error message says that "Jumbo frames are not supported on XDP", but the code checks for mtu > MVNETA_MAX_RX_BUF_SIZE, not mtu > 1500. Fix this error message. Signed-off-by: Marek Behún <kabel@kernel.org> Fixes: 0db51da7a8e9 ("net: mvneta: add basic XDP support") Cc: Lorenzo Bianconi <lorenzo@kernel.org> Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Link: https://lore.kernel.org/r/20210105172333.21613-1-kabel@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-05selftests: fix the return value for UDP GRO testPo-Hsu Lin1-0/+34
The udpgro.sh will always return 0 (unless the bpf selftest was not build first) even if there are some failed sub test-cases. Therefore the kselftest framework will report this case is OK. Check and return the exit status of each test to make it easier to spot real failures. Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-01-05net: ethernet: fs_enet: Add missing MODULE_LICENSEMichael Ellerman2-0/+2
Since commit 1d6cd3929360 ("modpost: turn missing MODULE_LICENSE() into error") the ppc32_allmodconfig build fails with: ERROR: modpost: missing MODULE_LICENSE() in drivers/net/ethernet/freescale/fs_enet/mii-fec.o ERROR: modpost: missing MODULE_LICENSE() in drivers/net/ethernet/freescale/fs_enet/mii-bitbang.o Add the missing MODULE_LICENSEs to fix the build. Both files include a copyright header indicating they are GPL v2. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-01-05net: qrtr: fix null-ptr-deref in qrtr_ns_removeQinglang Miao3-9/+16
A null-ptr-deref bug is reported by Hulk Robot like this: -------------- KASAN: null-ptr-deref in range [0x0000000000000128-0x000000000000012f] Call Trace: qrtr_ns_remove+0x22/0x40 [ns] qrtr_proto_fini+0xa/0x31 [qrtr] __x64_sys_delete_module+0x337/0x4e0 do_syscall_64+0x34/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x468ded -------------- When qrtr_ns_init fails in qrtr_proto_init, qrtr_ns_remove which would be called later on would raise a null-ptr-deref because qrtr_ns.workqueue has been destroyed. Fix it by making qrtr_ns_init have a return value and adding a check in qrtr_proto_init. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-01-05net: cdc_ncm: correct overhead in delayed_ndp_sizeJouni K. Seppänen1-2/+6
Aligning to tx_ndp_modulus is not sufficient because the next align call can be cdc_ncm_align_tail, which can add up to ctx->tx_modulus + ctx->tx_remainder - 1 bytes. This used to lead to occasional crashes on a Huawei 909s-120 LTE module as follows: - the condition marked /* if there is a remaining skb [...] */ is true so the swaps happen - skb_out is set from ctx->tx_curr_skb - skb_out->len is exactly 0x3f52 - ctx->tx_curr_size is 0x4000 and delayed_ndp_size is 0xac (note that the sum of skb_out->len and delayed_ndp_size is 0x3ffe) - the for loop over n is executed once - the cdc_ncm_align_tail call marked /* align beginning of next frame */ increases skb_out->len to 0x3f56 (the sum is now 0x4002) - the condition marked /* check if we had enough room left [...] */ is false so we break out of the loop - the condition marked /* If requested, put NDP at end of frame. */ is true so the NDP is written into skb_out - now skb_out->len is 0x4002, so padding_count is minus two interpreted as an unsigned number, which is used as the length argument to memset, leading to a crash with various symptoms but usually including > Call Trace: > <IRQ> > cdc_ncm_fill_tx_frame+0x83a/0x970 [cdc_ncm] > cdc_mbim_tx_fixup+0x1d9/0x240 [cdc_mbim] > usbnet_start_xmit+0x5d/0x720 [usbnet] The cdc_ncm_align_tail call first aligns on a ctx->tx_modulus boundary (adding at most ctx->tx_modulus-1 bytes), then adds ctx->tx_remainder bytes. Alternatively, the next alignment call can occur in cdc_ncm_ndp16 or cdc_ncm_ndp32, in which case at most ctx->tx_ndp_modulus-1 bytes are added. A similar problem has occurred before, and the code is nontrivial to reason about, so add a guard before the crashing call. By that time it is too late to prevent any memory corruption (we'll have written past the end of the buffer already) but we can at least try to get a warning written into an on-disk log by avoiding the hard crash caused by padding past the buffer with a huge number of zeros. Signed-off-by: Jouni K. Seppänen <jks@iki.fi> Fixes: 4a0e3e989d66 ("cdc_ncm: Add support for moving NDP to end of NCM frame") Link: https://bugzilla.kernel.org/show_bug.cgi?id=209407 Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-01-05Merge branch 'hns3-fixes'David S. Miller5-8/+18
Huazhong Tan says: ==================== net: hns3: fixes for -net There are some bugfixes for the HNS3 ethernet driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-01-05net: hns3: fix incorrect handling of sctp6 rss tupleJian Shen4-5/+14
For DEVICE_VERSION_V2, the hardware only supports src-ip, dst-ip and verification-tag for rss tuple set of sctp6 packet. For DEVICE_VERSION_V3, the hardware supports src-port and dst-port as well. Currently, when user queries the sctp6 rss tuples info, some unsupported information will be showed on V2. So add a check for hardware version when initializing and queries sctp6 rss tuple to fix this issue. Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-01-05net: hns3: fix the number of queues actually used by ARQYufeng Mo1-2/+2
HCLGE_MBX_MAX_ARQ_MSG_NUM is used to apply memory for the number of queues used by ARQ(Asynchronous Receive Queue), so the head and tail pointers should also use this macro. Fixes: 07a0556a3a73 ("net: hns3: Changes to support ARQ(Asynchronous Receive Queue)") Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-01-05net: hns3: fix a phy loopback fail issueYonglong Liu1-1/+2
When phy driver does not implement the set_loopback interface, phy loopback test will return -EOPNOTSUPP, and the loopback test will fail. So when phy driver does not implement the set_loopback interface, don't do phy loopback test. Fixes: c9765a89d142 ("net: hns3: add phy selftest function") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-01-05docs: net: fix documentation on .ndo_get_statsJakub Kicinski1-2/+2
Fix calling context. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-01-05Merge branch 'stmmac-fixes'David S. Miller1-47/+82
Samuel Holland says: ==================== Fixes for dwmac-sun8i suspend/resume This series fixes issues preventing dwmac-sun8i from working after a suspend/resume cycle. Those issues include the PHY being left powered off, the MAC syscon configuration being reset, and the reference to the reset controller being improperly dropped. They also fix related issues in probe error handling and driver removal. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-01-05net: stmmac: dwmac-sun8i: Balance syscon (de)initializationSamuel Holland1-25/+25
Previously, sun8i_dwmac_set_syscon was called from a chain of functions in several different files: sun8i_dwmac_probe stmmac_dvr_probe stmmac_hw_init stmmac_hwif_init sun8i_dwmac_setup sun8i_dwmac_set_syscon which made the lifetime of the syscon values hard to reason about. Part of the problem is that there is no similar platform driver callback from stmmac_dvr_remove. As a result, the driver unset the syscon value in sun8i_dwmac_exit, but this leaves it uninitialized after a suspend/ resume cycle. It was also unset a second time (outside sun8i_dwmac_exit) in the probe error path. Move the init to the earliest available place in sun8i_dwmac_probe (after stmmac_probe_config_dt, which initializes plat_dat), and the deinit to the corresponding position in the cleanup order. Since priv is not filled in until stmmac_dvr_probe, this requires changing the sun8i_dwmac_set_syscon parameters to priv's two relevant members. Fixes: 9f93ac8d4085 ("net-next: stmmac: Add dwmac-sun8i") Fixes: 634db83b8265 ("net: stmmac: dwmac-sun8i: Handle integrated/external MDIOs") Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-01-05net: stmmac: dwmac-sun8i: Balance internal PHY powerSamuel Holland1-8/+23
sun8i_dwmac_exit calls sun8i_dwmac_unpower_internal_phy, but sun8i_dwmac_init did not call sun8i_dwmac_power_internal_phy. This caused PHY power to remain off after a suspend/resume cycle. Fix this by recording if PHY power should be restored, and if so, restoring it. Fixes: 634db83b8265 ("net: stmmac: dwmac-sun8i: Handle integrated/external MDIOs") Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-01-05net: stmmac: dwmac-sun8i: Balance internal PHY resource referencesSamuel Holland1-6/+21
While stmmac_pltfr_remove calls sun8i_dwmac_exit, the sun8i_dwmac_init and sun8i_dwmac_exit functions are also called by the stmmac_platform suspend/resume callbacks. They may be called many times during the device's lifetime and should not release resources used by the driver. Furthermore, there was no error handling in case registering the MDIO mux failed during probe, and the EPHY clock was never released at all. Fix all of these issues by moving the deinitialization code to a driver removal callback. Also ensure the EPHY is powered down before removal. Fixes: 634db83b8265 ("net: stmmac: dwmac-sun8i: Handle integrated/external MDIOs") Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-01-05net: stmmac: dwmac-sun8i: Fix probe error handlingSamuel Holland1-10/+15
stmmac_pltfr_remove does three things in one function, making it inapproprate for unwinding the steps in the probe function. Currently, a failure before the call to stmmac_dvr_probe would leak OF node references due to missing a call to stmmac_remove_config_dt. And an error in stmmac_dvr_probe would cause the driver to attempt to remove a netdevice that was never added. Fix these by reordering the init and splitting out the error handling steps. Fixes: 9f93ac8d4085 ("net-next: stmmac: Add dwmac-sun8i") Fixes: 40a1dcee2d18 ("net: ethernet: dwmac-sun8i: Use the correct function in exit path") Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-01-05net: vlan: avoid leaks on register_vlan_dev() failuresJakub Kicinski1-1/+2
VLAN checks for NETREG_UNINITIALIZED to distinguish between registration failure and unregistration in progress. Since commit cb626bf566eb ("net-sysfs: Fix reference count leak") registration failure may, however, result in NETREG_UNREGISTERED as well as NETREG_UNINITIALIZED. This fix is similer to cebb69754f37 ("rtnetlink: Fix memory(net_device) leak when ->newlink fails") Fixes: cb626bf566eb ("net-sysfs: Fix reference count leak") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-01-05net: suggest L2 discards be counted towards rx_droppedJakub Kicinski1-2/+3
From the existing definitions it's unclear which stat to use to report filtering based on L2 dst addr in old broadcast-medium Ethernet. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-01-05net/sonic: Fix some resource leaks in error handling pathsChristophe JAILLET2-4/+15
A call to dma_alloc_coherent() is wrapped by sonic_alloc_descriptors(). This is correctly freed in the remove function, but not in the error handling path of the probe function. Fix this by adding the missing dma_free_coherent() call. While at it, rename a label in order to be slightly more informative. Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Chris Zankel <chris@zankel.net> References: commit 10e3cc180e64 ("net/sonic: Fix a resource leak in an error handling path in 'jazz_sonic_probe()'") Fixes: 74f2a5f0ef64 ("xtensa: Add support for the Sonic Ethernet device for the XT2000 board.") Fixes: efcce839360f ("[PATCH] macsonic/jazzsonic network drivers update") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-01-05wan: ds26522: select CONFIG_BITREVERSEArnd Bergmann1-0/+1
Without this, the driver runs into a link failure arm-linux-gnueabi-ld: drivers/net/wan/slic_ds26522.o: in function `slic_ds26522_probe': slic_ds26522.c:(.text+0x100c): undefined reference to `byte_rev_table' arm-linux-gnueabi-ld: slic_ds26522.c:(.text+0x1cdc): undefined reference to `byte_rev_table' arm-linux-gnueabi-ld: drivers/net/wan/slic_ds26522.o: in function `slic_write': slic_ds26522.c:(.text+0x1e4c): undefined reference to `byte_rev_table' Fixes: c37d4a0085c5 ("Maxim/driver: Add driver for maxim ds26522") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-01-05misdn: dsp: select CONFIG_BITREVERSEArnd Bergmann1-0/+1
Without this, we run into a link error arm-linux-gnueabi-ld: drivers/isdn/mISDN/dsp_audio.o: in function `dsp_audio_generate_law_tables': (.text+0x30c): undefined reference to `byte_rev_table' arm-linux-gnueabi-ld: drivers/isdn/mISDN/dsp_audio.o:(.text+0x5e4): more undefined references to `byte_rev_table' follow Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-01-05cfg80211: select CONFIG_CRC32Arnd Bergmann1-0/+1
Without crc32 support, this fails to link: arm-linux-gnueabi-ld: net/wireless/scan.o: in function `cfg80211_scan_6ghz': scan.c:(.text+0x928): undefined reference to `crc32_le' Fixes: c8cb5b854b40 ("nl80211/cfg80211: support 6 GHz scanning") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-01-05wil6210: select CONFIG_CRC32Arnd Bergmann1-0/+1
Without crc32, the driver fails to link: arm-linux-gnueabi-ld: drivers/net/wireless/ath/wil6210/fw.o: in function `wil_fw_verify': fw.c:(.text+0x74c): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/wireless/ath/wil6210/fw.o:fw.c:(.text+0x758): more undefined references to `crc32_le' follow Fixes: 151a9706503f ("wil6210: firmware download") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-01-05can: kvaser_pciefd: select CONFIG_CRC32Arnd Bergmann1-0/+1
Without crc32, this driver fails to link: arm-linux-gnueabi-ld: drivers/net/can/kvaser_pciefd.o: in function `kvaser_pciefd_probe': kvaser_pciefd.c:(.text+0x2b0): undefined reference to `crc32_be' Fixes: 26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-01-05phy: dp83640: select CONFIG_CRC32Arnd Bergmann1-0/+1
Without crc32, this driver fails to link: arm-linux-gnueabi-ld: drivers/net/phy/dp83640.o: in function `match': dp83640.c:(.text+0x476c): undefined reference to `crc32_le' Fixes: 539e44d26855 ("dp83640: Include hash in timestamp/packet matching") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-01-05qed: select CONFIG_CRC32Arnd Bergmann1-0/+1
Without this, the driver fails to link: lpc_eth.c:(.text+0x1934): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/qlogic/qed/qed_debug.o: in function `qed_grc_dump': qed_debug.c:(.text+0x4068): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/qlogic/qed/qed_debug.o: in function `qed_idle_chk_dump': qed_debug.c:(.text+0x51fc): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/qlogic/qed/qed_debug.o: in function `qed_mcp_trace_dump': qed_debug.c:(.text+0x6000): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/qlogic/qed/qed_debug.o: in function `qed_dbg_reg_fifo_dump': qed_debug.c:(.text+0x66cc): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/net/ethernet/qlogic/qed/qed_debug.o:qed_debug.c:(.text+0x6aa4): more undefined references to `crc32_le' follow Fixes: 7a4b21b7d1f0 ("qed: Add nvram selftest") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-01-05Merge tag 'arc-5.11-rc3' of ↵Linus Torvalds2-21/+17
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc Pull ARC updates from Vineet Gupta: "Things are quieter on upstreaming front as we are mostly focusing on ARCv3/ARC64 port. This contains just build system updates from Masahiro Yamada" * tag 'arc-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc: ARC: build: use $(READELF) instead of hard-coded readelf ARC: build: remove unneeded extra-y ARC: build: move symlink creation to arch/arc/Makefile to avoid race ARC: build: add boot_targets to PHONY ARC: build: add uImage.lzma to the top-level target ARC: build: remove non-existing bootpImage from KBUILD_IMAGE
2021-01-05Merge tag 'net-5.11-rc3' of ↵Linus Torvalds92-411/+710
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Networking fixes, including fixes from netfilter, wireless and bpf trees. Current release - regressions: - mt76: fix NULL pointer dereference in mt76u_status_worker and mt76s_process_tx_queue - net: ipa: fix interconnect enable bug Current release - always broken: - netfilter: fixes possible oops in mtype_resize in ipset - ath11k: fix number of coding issues found by static analysis tools and spurious error messages Previous releases - regressions: - e1000e: re-enable s0ix power saving flows for systems with the Intel i219-LM Ethernet controllers to fix power use regression - virtio_net: fix recursive call to cpus_read_lock() to avoid a deadlock - ipv4: ignore ECN bits for fib lookups in fib_compute_spec_dst() - sysfs: take the rtnl lock around XPS configuration - xsk: fix memory leak for failed bind and rollback reservation at NETDEV_TX_BUSY - r8169: work around power-saving bug on some chip versions Previous releases - always broken: - dcb: validate netlink message in DCB handler - tun: fix return value when the number of iovs exceeds MAX_SKB_FRAGS to prevent unnecessary retries - vhost_net: fix ubuf refcount when sendmsg fails - bpf: save correct stopping point in file seq iteration - ncsi: use real net-device for response handler - neighbor: fix div by zero caused by a data race (TOCTOU) - bareudp: fix use of incorrect min_headroom size and a false positive lockdep splat from the TX lock - mvpp2: - clear force link UP during port init procedure in case bootloader had set it - add TCAM entry to drop flow control pause frames - fix PPPoE with ipv6 packet parsing - fix GoP Networking Complex Control config of port 3 - fix pkt coalescing IRQ-threshold configuration - xsk: fix race in SKB mode transmit with shared cq - ionic: account for vlan tag len in rx buffer len - stmmac: ignore the second clock input, current clock framework does not handle exclusive clock use well, other drivers may reconfigure the second clock Misc: - ppp: change PPPIOCUNBRIDGECHAN ioctl request number to follow existing scheme" * tag 'net-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (99 commits) net: dsa: lantiq_gswip: Fix GSWIP_MII_CFG(p) register access net: dsa: lantiq_gswip: Enable GSWIP_MII_CFG_EN also for internal PHYs net: lapb: Decrease the refcount of "struct lapb_cb" in lapb_device_event r8169: work around power-saving bug on some chip versions net: usb: qmi_wwan: add Quectel EM160R-GL selftests: mlxsw: Set headroom size of correct port net: macb: Correct usage of MACB_CAPS_CLK_HW_CHG flag ibmvnic: fix: NULL pointer dereference. docs: networking: packet_mmap: fix old config reference docs: networking: packet_mmap: fix formatting for C macros vhost_net: fix ubuf refcount incorrectly when sendmsg fails bareudp: Fix use of incorrect min_headroom size bareudp: set NETIF_F_LLTX flag net: hdlc_ppp: Fix issues when mod_timer is called while timer is running atlantic: remove architecture depends erspan: fix version 1 check in gre_parse_header() net: hns: fix return value check in __lb_other_process() net: sched: prevent invalid Scell_log shift count net: neighbor: fix a crash caused by mod zero ipv4: Ignore ECN bits for fib lookups in fib_compute_spec_dst() ...
2021-01-05Merge tag 'afs-fixes-04012021' of ↵Linus Torvalds4-31/+51
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull AFS fixes from David Howells: "Two fixes. The first is the fix for the strnlen() array limit check and the second fixes the calculation of the number of dirent records used to represent any particular filename length" * tag 'afs-fixes-04012021' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: afs: Fix directory entry size calculation afs: Work around strnlen() oops with CONFIG_FORTIFIED_SOURCE=y
2021-01-05mm: make wait_on_page_writeback() wait for multiple pending writebacksLinus Torvalds1-1/+1
Ever since commit 2a9127fcf229 ("mm: rewrite wait_on_page_bit_common() logic") we've had some very occasional reports of BUG_ON(PageWriteback) in write_cache_pages(), which we thought we already fixed in commit 073861ed77b6 ("mm: fix VM_BUG_ON(PageTail) and BUG_ON(PageWriteback)"). But syzbot just reported another one, even with that commit in place. And it turns out that there's a simpler way to trigger the BUG_ON() than the one Hugh found with page re-use. It all boils down to the fact that the page writeback is ostensibly serialized by the page lock, but that isn't actually really true. Yes, the people _setting_ writeback all do so under the page lock, but the actual clearing of the bit - and waking up any waiters - happens without any page lock. This gives us this fairly simple race condition: CPU1 = end previous writeback CPU2 = start new writeback under page lock CPU3 = write_cache_pages() CPU1 CPU2 CPU3 ---- ---- ---- end_page_writeback() test_clear_page_writeback(page) ... delayed... lock_page(); set_page_writeback() unlock_page() lock_page() wait_on_page_writeback(); wake_up_page(page, PG_writeback); .. wakes up CPU3 .. BUG_ON(PageWriteback(page)); where the BUG_ON() happens because we woke up the PG_writeback bit becasue of the _previous_ writeback, but a new one had already been started because the clearing of the bit wasn't actually atomic wrt the actual wakeup or serialized by the page lock. The reason this didn't use to happen was that the old logic in waiting on a page bit would just loop if it ever saw the bit set again. The nice proper fix would probably be to get rid of the whole "wait for writeback to clear, and then set it" logic in the writeback path, and replace it with an atomic "wait-to-set" (ie the same as we have for page locking: we set the page lock bit with a single "lock_page()", not with "wait for lock bit to clear and then set it"). However, out current model for writeback is that the waiting for the writeback bit is done by the generic VFS code (ie write_cache_pages()), but the actual setting of the writeback bit is done much later by the filesystem ".writepages()" function. IOW, to make the writeback bit have that same kind of "wait-to-set" behavior as we have for page locking, we'd have to change our roughly ~50 different writeback functions. Painful. Instead, just make "wait_on_page_writeback()" loop on the very unlikely situation that the PG_writeback bit is still set, basically re-instating the old behavior. This is very non-optimal in case of contention, but since we only ever set the bit under the page lock, that situation is controlled. Reported-by: syzbot+2fc0712f8f8b8b8fa0ef@syzkaller.appspotmail.com Fixes: 2a9127fcf229 ("mm: rewrite wait_on_page_bit_common() logic") Acked-by: Hugh Dickins <hughd@google.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-01-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfJakub Kicinski4-6/+21
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Missing sanitization of rateest userspace string, bug has been triggered by syzbot, patch from Florian Westphal. 2) Report EOPNOTSUPP on missing set features in nft_dynset, otherwise error reporting to userspace via EINVAL is misleading since this is reserved for malformed netlink requests. 3) New binaries with old kernels might silently accept several set element expressions. New binaries set on the NFT_SET_EXPR and NFT_DYNSET_F_EXPR flags to request for several expressions per element, hence old kernels which do not support for this bail out with EOPNOTSUPP. * git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf: netfilter: nftables: add set expression flags netfilter: nft_dynset: report EOPNOTSUPP on missing set feature netfilter: xt_RATEEST: reject non-null terminated string from userspace ==================== Link: https://lore.kernel.org/r/20210103192920.18639-1-pablo@netfilter.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-04Merge branch 'net-dsa-lantiq_gswip-two-fixes-for-net-stable'Jakub Kicinski1-20/+7
Martin Blumenstingl says: ==================== net: dsa: lantiq_gswip: two fixes for -net/-stable While testing the lantiq_gswip driver in OpenWrt at least one board had a non-working Ethernet port connected to an internal 100Mbit/s PHY22F GPHY. The problem which could be observed: - the PHY would detect the link just fine - ethtool stats would see the TX counter rise - the RX counter in ethtool was stuck at zero It turns out that two independent patches are needed to fix this: - first we need to enable the MII data lines also for internal PHYs - second we need to program the GSWIP_MII_CFG registers for all ports except the CPU port These two patches have also been tested by back-porting them on top of Linux 5.4.86 in OpenWrt. Special thanks to Hauke for debugging and brainstorming this on IRC with me! ==================== Link: https://lore.kernel.org/r/20210103012544.3259029-1-martin.blumenstingl@googlemail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-04net: dsa: lantiq_gswip: Fix GSWIP_MII_CFG(p) register accessMartin Blumenstingl1-17/+6
There is one GSWIP_MII_CFG register for each switch-port except the CPU port. The register offset for the first port is 0x0, 0x02 for the second, 0x04 for the third and so on. Update the driver to not only restrict the GSWIP_MII_CFG registers to ports 0, 1 and 5. Handle ports 0..5 instead but skip the CPU port. This means we are not overwriting the configuration for the third port (port two since we start counting from zero) with the settings for the sixth port (with number five) anymore. The GSWIP_MII_PCDU(p) registers are not updated because there's really only three (one for each of the following ports: 0, 1, 5). Fixes: 14fceff4771e51 ("net: dsa: Add Lantiq / Intel DSA driver for vrx200") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-04net: dsa: lantiq_gswip: Enable GSWIP_MII_CFG_EN also for internal PHYsMartin Blumenstingl1-3/+1
Enable GSWIP_MII_CFG_EN also for internal PHYs to make traffic flow. Without this the PHY link is detected properly and ethtool statistics for TX are increasing but there's no RX traffic coming in. Fixes: 14fceff4771e51 ("net: dsa: Add Lantiq / Intel DSA driver for vrx200") Suggested-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Hauke Mehrtens <hauke@hauke-m.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-04net: lapb: Decrease the refcount of "struct lapb_cb" in lapb_device_eventXie He1-0/+1
In lapb_device_event, lapb_devtostruct is called to get a reference to an object of "struct lapb_cb". lapb_devtostruct increases the refcount of the object and returns a pointer to it. However, we didn't decrease the refcount after we finished using the pointer. This patch fixes this problem. Fixes: a4989fa91110 ("net/lapb: support netdev events") Cc: Martin Schiller <ms@dev.tdt.de> Signed-off-by: Xie He <xie.he.0141@gmail.com> Link: https://lore.kernel.org/r/20201231174331.64539-1-xie.he.0141@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-04r8169: work around power-saving bug on some chip versionsHeiner Kallweit1-2/+4
A user reported failing network with RTL8168dp (a quite rare chip version). Realtek confirmed that few chip versions suffer from a PLL power-down hw bug. Fixes: 07df5bd874f0 ("r8169: power down chip in probe") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/a1c39460-d533-7f9e-fa9d-2b8990b02426@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-04net: usb: qmi_wwan: add Quectel EM160R-GLBjørn Mork1-0/+1
New modem using ff/ff/30 for QCDM, ff/00/00 for AT and NMEA, and ff/ff/ff for RMNET/QMI. T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=5000 MxCh= 0 D: Ver= 3.20 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=2c7c ProdID=0620 Rev= 4.09 S: Manufacturer=Quectel S: Product=EM160R-GL S: SerialNumber=e31cedc1 C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=896mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms Signed-off-by: Bjørn Mork <bjorn@mork.no> Link: https://lore.kernel.org/r/20201230152451.245271-1-bjorn@mork.no Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-16 07:36:42 +0000