summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2014-03-14Merge tag 'v3.14-rc6' into develLinus Walleij1429-8922/+17373
Linux 3.14-rc6
2014-03-14gpio: clamp returned values to the boolean rangeAlexandre Courbot1-6/+6
Nothing prevents GPIO drivers from returning values outside the boolean range, and as it turns out a few drivers are actually doing so. These values were passed as-is to unsuspecting consumers and created confusion. This patch makes the internal _gpiod_get_raw_value() function return a bool, effectively clamping the GPIO value to the boolean range no matter what the driver does. While we are at it, we also change the value parameter of _gpiod_set_raw_value() to bool type before drivers start doing funny things with it as well. Another way to fix this would be to change the prototypes of the driver interface to use bool directly, but this would require a huge cross-systems patch so this simpler solution is preferred. Changes since v1: - Change local variable type to bool as well, use boolean values in code - Also change prototype of open drain/open source setting functions since they are only called from _gpiod_set_raw_value() This probably calls for a larger booleanization of gpiolib, but let's keep that for a latter change - right now we need to address the issue of non-boolean values returned by drivers. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-13gpio / ACPI: Rework ACPI GPIO event handlingMika Westerberg2-86/+131
The current ACPI GPIO event handling code was never tested against real hardware with functioning GPIO triggered events (at the time such hardware wasn't available). Thus it misses certain things like requesting the GPIOs properly, passing correct flags to the interrupt handler and so on. This patch reworks ACPI GPIO event handling so that we: 1) Use struct acpi_gpio_event for all GPIO signaled events. 2) Switch to use GPIO descriptor API and request GPIOs by calling gpiochip_request_own_desc() that we added in a previous patch. 3) Pass proper flags from ACPI GPIO resource to request_threaded_irq(). Also instead of open-coding the _AEI iteration loop we can use acpi_walk_resources(). This simplifies the code a bit and fixes memory leak that was caused by missing kfree() for buffer returned by acpi_get_event_resources(). Since the remove path now calls gpiochip_free_own_desc() which takes GPIO spinlock we need to call acpi_gpiochip_remove() outside of that lock (analogous to acpi_gpiochip_add() path where the lock is released before those funtions are called). Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-13gpio / ACPI: Rename acpi_gpio_evt_pin to acpi_gpio_eventMika Westerberg1-20/+19
In order to consolidate _Exx, _Lxx and _EVT to use the same structure make the structure name to reflect that we are dealing with any event, not just _EVT. This is just rename, no functional changes. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-13gpio / ACPI: Allocate ACPI specific data directly in acpi_gpiochip_add()Mika Westerberg1-42/+64
We are going to add more ACPI specific data to accompany GPIO chip so instead of allocating it per each use-case we allocate it once when acpi_gpiochip_add() is called and release it when acpi_gpiochip_remove() is called. Doing this allows us to add more ACPI specific data by merely adding new fields to struct acpi_gpio_chip. In addition we embed evt_pins member directly to the structure instead of having it as a pointer. This simplifies the code a bit since we don't need to check against NULL. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-13gpiolib: Allow GPIO chips to request their own GPIOsMika Westerberg2-27/+76
Sometimes it is useful to allow GPIO chips themselves to request GPIOs they own through gpiolib API. One use case is ACPI ASL code that should be able to toggle GPIOs through GPIO operation regions. We can't use gpio_request() because it will pin the module to the kernel forever (it calls try_module_get()). To solve this we move module refcount manipulation to gpiod_request() and let __gpiod_request() handle the actual request. This changes the sequence a bit as now try_module_get() is called outside of gpio_lock (I think this is safe, try_module_get() handles serialization it needs already). Then we provide gpiolib internal functions gpiochip_request/free_own_desc() that do the same as gpio_request() but don't manipulate module refrence count. This allows the GPIO chip driver to request and free descriptors it owns without being pinned to the kernel forever. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-12MAINTAINERS: Add Broadcom GPIO maintainerMarkus Mayer1-0/+7
List myself as maintainer for Broadcom's Kona GPIO driver. Signed-off-by: Markus Mayer <markus.mayer@linaro.org> Acked-by: Christian Daudt <bcm@fixthebug.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-12gpio: Spelling s/than/that/Geert Uytterhoeven1-1/+1
Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-gpio@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-12gpio: cs5535: Simplify dependenciesJean Delvare1-1/+1
The bus and architecture dependencies are already on MFD_CS5535, so there is no need to repeat them here. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Alexandre Courbot <gnurou@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-12gpio: mcp23s08: trivial: fixed coding style issuesGary Servin1-11/+11
This coding style issue was detected using the checkpatch.pl script Signed-off-by: Gary Servin <garyservin@gmail.com> Reviewed-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-12gpio: max732x: Fix possible NULL pointer dereference on i2c_new_dummy errorKrzysztof Kozlowski1-0/+7
In max732x_probe() driver allocates dummy I2C device (if number of ports is greater than 8) with i2c_new_dummy() but it does not check the return value of this call. In case of error (i2c_new_device(): memory allocation failure or I2C address cannot be used) this function returns NULL which is later dereferenced by i2c_smbus_read_byte() (called from max732x_readb()). Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-12gpio: max732x: Fix I2C dummy device resource leak on probe failureKrzysztof Kozlowski1-0/+2
In max732x_probe() driver allocates dummy I2C device (if number of ports is greater than 8) however it is not unregistered if probe fails later. Fix the leak by unregistering dummy I2C device if it was allocated. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-11devicetree: bindings: gpio-davinic: fix documentationLad, Prabhakar1-0/+21
This patch adds missing #gpio-cells and also adds a usage example for leds. Reported-by: Alexander Holler <holler@ahsoftware.de> Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-11gpio: davinci: fix gpio selection for OFAlexander Holler1-0/+24
The driver missed an of_xlate function to translate gpio numbers as found in the DT to the correct chip and number. While there I've set #gpio_cells to a fixed value of 2. I've used gpio-pxa.c as template for those changes and tested my changes successfully on a da850 board using entries for gpio-leds in a DT. So I didn't reinvent the wheel but just copied and tested stuff. Thanks to Grygorii Strashko for the hint to the existing code in gpio-pxa. Signed-off-by: Alexander Holler <holler@ahsoftware.de> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-09Linux 3.14-rc6v3.14-rc6Linus Torvalds1-1/+1
2014-03-09Merge tag 'fixes-for-linus' of ↵Linus Torvalds19-53/+146
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from from Olof Johansson: "A collection of fixes for ARM platforms. A little large due to us missing to do one last week, but there's nothing in particular here that is in itself large and scary. Mostly a handful of smaller fixes all over the place. The majority is made up of fixes for OMAP, but there are a few for others as well. In particular, there was a decision to rename a binding for the Broadcom pinctrl block that we need to go in before the final release since we then treat it as ABI" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: dts: omap3-gta04: Add ti,omap36xx to compatible property to avoid problems with booting ARM: tegra: add LED options back into tegra_defconfig ARM: dts: omap3-igep: fix boot fail due wrong compatible match ARM: OMAP3: Fix pinctrl interrupts for core2 pinctrl: Rename Broadcom Capri pinctrl binding pinctrl: refer to updated dt binding string. Update dtsi with new pinctrl compatible string ARM: OMAP: Kill warning in CPUIDLE code with !CONFIG_SMP ARM: OMAP2+: Add support for thumb mode on DT booted N900 ARM: OMAP2+: clock: fix clkoutx2 with CLK_SET_RATE_PARENT ARM: OMAP4: hwmod: Fix SOFTRESET logic for OMAP4 ARM: DRA7: hwmod data: correct the sysc data for spinlock ARM: OMAP5: PRM: Fix reboot handling ARM: sunxi: dt: Change the touchscreen compatibles ARM: sun7i: dt: Fix interrupt trigger types
2014-03-09Merge tag 'nfs-for-3.14-5' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds6-31/+37
Pull NFS client bugfixes from Trond Myklebust: "Highlights include: - Fix another nfs4_sequence corruptor in RELEASE_LOCKOWNER - Fix an Oopsable delegation callback race - Fix another bad stateid infinite loop - Fail the data server I/O is the stateid represents a lost lock - Fix an Oopsable sunrpc trace event" * tag 'nfs-for-3.14-5' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: SUNRPC: Fix oops when trace sunrpc_task events in nfs client NFSv4: Fail the truncate() if the lock/open stateid is invalid NFSv4.1 Fail data server I/O if stateid represents a lost lock NFSv4: Fix the return value of nfs4_select_rw_stateid NFSv4: nfs4_stateid_is_current should return 'true' for an invalid stateid NFS: Fix a delegation callback race NFSv4: Fix another nfs4_sequence corruptor
2014-03-09Merge tag 'usb-3.14-rc6' of ↵Linus Torvalds4-19/+11
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are 4 USB fixes for your current tree. Two of them are reverts to hopefully resolve the nasty XHCI regressions we have been having on some types of devices. The other two are quirks for some Logitech video devices" * tag 'usb-3.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: Revert "USBNET: ax88179_178a: enable tso if usb host supports sg dma" Revert "xhci 1.0: Limit arbitrarily-aligned scatter gather." usb: Make DELAY_INIT quirk wait 100ms between Get Configuration requests usb: Add device quirk for Logitech HD Pro Webcams C920 and C930e
2014-03-09Merge tag 'staging-3.15-rc6' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver tree fix from Greg KH: "Here is a single staging driver fix for your tree. It resolves an issue with arbritary writes to memory if a specific driver is loaded" * tag 'staging-3.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging/cxt1e1/linux.c: Correct arbitrary memory write in c4_ioctl()
2014-03-09KEYS: Make the keyring cycle detector ignore other keyrings of the same nameDavid Howells1-1/+5
This fixes CVE-2014-0102. The following command sequence produces an oops: keyctl new_session i=`keyctl newring _ses @s` keyctl link @s $i The problem is that search_nested_keyrings() sees two keyrings that have matching type and description, so keyring_compare_object() returns true. s_n_k() then passes the key to the iterator function - keyring_detect_cycle_iterator() - which *should* check to see whether this is the keyring of interest, not just one with the same name. Because assoc_array_find() will return one and only one match, I assumed that the iterator function would only see an exact match or never be called - but the iterator isn't only called from assoc_array_find()... The oops looks something like this: kernel BUG at /data/fs/linux-2.6-fscache/security/keys/keyring.c:1003! invalid opcode: 0000 [#1] SMP ... RIP: keyring_detect_cycle_iterator+0xe/0x1f ... Call Trace: search_nested_keyrings+0x76/0x2aa __key_link_check_live_key+0x50/0x5f key_link+0x4e/0x85 keyctl_keyring_link+0x60/0x81 SyS_keyctl+0x65/0xe4 tracesys+0xdd/0xe2 The fix is to make keyring_detect_cycle_iterator() check that the key it has is the key it was actually looking for rather than calling BUG_ON(). A testcase has been included in the keyutils testsuite for this: http://git.kernel.org/cgit/linux/kernel/git/dhowells/keyutils.git/commit/?id=891f3365d07f1996778ade0e3428f01878a1790b Reported-by: Tommi Rantala <tt.rantala@gmail.com> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: James Morris <james.l.morris@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-03-09Merge branch 'for-rc6' of ↵Linus Torvalds3-15/+36
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal fixes from Zhang Rui: "Specifics: - Update the help text of INT3403 Thermal driver, which was not friendly to users. From Zhang Rui. - The "type" sysfs attribute of x86_pkg_temp_thermal registered thermal zones includes an instance number, which makes the thermal-to-hwmon bridge fails to group them all in a single hwmon device. Fixed by Jean Delvare. - The hwmon device registered by x86_pkg_temp_thermal driver is redundant because the temperature value reported by x86_pkg_temp_thermal is already reported by the coretemp driver. Fixed by Jean Delvare. - Fix a problem that the cooling device can not be updated properly if it is initialized at max cooling state. From Ni Wade. - Fix a problem that OF registered thermal zones are running without thermal governors. From Zhang Rui. - Commit beeb5a1e0ef7 ("thermal: rcar-thermal: Enable driver compilation with COMPILE_TEST") broke build on archs wihout io memory. Thus make it depend on HAS_IOMEM to bypass build failures. Fixed by Richard Weinberger" * 'for-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: Thermal: thermal zone governor fix Thermal: Allow first update of cooling device state thermal,rcar_thermal: Add dependency on HAS_IOMEM x86_pkg_temp_thermal: Fix the thermal zone type x86_pkg_temp_thermal: Do not expose as a hwmon device Thermal: update INT3404 thermal driver help text
2014-03-09Merge tag 'spi-v3.14-rc5' of ↵Linus Torvalds6-17/+35
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A scattering of driver specific fixes here. The fixes from Axel cover bitrot in apparently unmaintained drivers, the at79 bug is fixing a glitch on /CS during initialisation of some devices which could break some slaves and the remainder are fixes for recently introduced bugs from the past release cycle or so" * tag 'spi-v3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: atmel: add missing spi_master_{resume,suspend} calls to PM callbacks spi: coldfire-qspi: Fix getting correct address for *mcfqspi spi: fsl-dspi: Fix getting correct address for master spi: spi-ath79: fix initial GPIO CS line setup spi: spi-imx: spi_imx_remove: do not disable disabled clocks spi-topcliff-pch: Fix probing when DMA mode is used spi/topcliff-pch: Fix DMA channel
2014-03-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds7-103/+151
Pull SCSI target fixes from Nicholas Bellinger: "This series addresses a number of outstanding issues wrt to active I/O shutdown using iser-target. This includes: - Fix a long standing tpg_state bug where a tpg could be referenced during explicit shutdown (v3.1+ stable) - Use list_del_init for iscsi_cmd->i_conn_node so list_empty checks work as expected (v3.10+ stable) - Fix a isert_conn->state related hung task bug + ensure outstanding I/O completes during session shutdown. (v3.10+ stable) - Fix isert_conn->post_send_buf_count accounting for RDMA READ/WRITEs (v3.10+ stable) - Ignore FRWR completions during active I/O shutdown (v3.12+ stable) - Fix command leakage for interrupt coalescing during active I/O shutdown (v3.13+ stable) Also included is another DIF emulation fix from Sagi specific to v3.14-rc code" * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: Target/sbc: Fix sbc_copy_prot for offset scatters iser-target: Fix command leak for tx_desc->comp_llnode_batch iser-target: Ignore completions for FRWRs in isert_cq_tx_work iser-target: Fix post_send_buf_count for RDMA READ/WRITE iscsi/iser-target: Fix isert_conn->state hung shutdown issues iscsi/iser-target: Use list_del_init for ->i_conn_node iscsi-target: Fix iscsit_get_tpg_from_np tpg_state bug
2014-03-09Revert "ACPI / sleep: pm_power_off needs more sanity checks to be installed"Rafael J. Wysocki1-6/+1
Revert commit 3130497f5bab ("ACPI / sleep: pm_power_off needs more sanity checks to be installed") that breaks power ACPI power off on a lot of systems, because it checks wrong registers. Fixes: 3130497f5bab ("ACPI / sleep: pm_power_off needs more sanity checks to be installed") Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-03-08Merge tag 'omap-for-v3.14/fixes-dt-rc4' of ↵Olof Johansson3-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes From Tony Lindgren: Two omap3430 vs 3630 device tree regression fixes for issues booting 3430 based boards. * tag 'omap-for-v3.14/fixes-dt-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: omap3-gta04: Add ti,omap36xx to compatible property to avoid problems with booting ARM: dts: omap3-igep: fix boot fail due wrong compatible match Signed-off-by: Olof Johansson <olof@lixom.net>
2014-03-08Merge tag 'bcm-for-3.14-pinctrl-reduced-rename' of ↵Olof Johansson352-2153/+3378
git://github.com/broadcom/bcm11351 into fixes Merge 'bcm pinctrl rename' From Christin Daudt: Rename pinctrl dt binding to restore consistency with other bcm mobile bindings. * tag 'bcm-for-3.14-pinctrl-reduced-rename' of git://github.com/broadcom/bcm11351: pinctrl: Rename Broadcom Capri pinctrl binding pinctrl: refer to updated dt binding string. Update dtsi with new pinctrl compatible string + Linux 3.14-rc4 Signed-off-by: Olof Johansson <olof@lixom.net>
2014-03-08Merge tag 'sunxi-fixes-for-3.14' of https://github.com/mripard/linux into fixesOlof Johansson4-9/+9
Allwinner fixes from Maxime Ripard: Two fixes for device trees additions that got added in 3.14. One fixes the interrupt types of some IPs, the other fixes up a compatible that got introduced during 3.14 * tag 'sunxi-fixes-for-3.14' of https://github.com/mripard/linux: ARM: sunxi: dt: Change the touchscreen compatibles ARM: sun7i: dt: Fix interrupt trigger types Signed-off-by: Olof Johansson <olof@lixom.net>
2014-03-08Merge branch 'for-3.14-fixes' of ↵Linus Torvalds1-7/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup fixes from Tejun Heo: "Two cpuset locking fixes from Li. Both tagged for -stable" * 'for-3.14-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cpuset: fix a race condition in __cpuset_node_allowed_softwall() cpuset: fix a locking issue in cpuset_migrate_mm()
2014-03-08Merge branch 'for-3.14-fixes' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata fixes from Tejun Heo: "Just a couple patches blacklisting more broken devices" * 'for-3.14-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: libata: add ATA_HORKAGE_BROKEN_FPDMA_AA quirk for Seagate Momentus SpinPoint M8 (2BA30001) libata: disable queued TRIM for Crucial M500 mSATA SSDs
2014-03-08Merge branch 'for-3.14-fixes' of ↵Linus Torvalds3-11/+29
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq Pull workqueue fix from Tejun Heo: "This pull request contains a workqueue usage fix for firewire. For quite a long time now, workqueue only treats two work items identical iff both their addresses and callbacks match. This is to avoid introducing false dependency through the work item being recycled while being executed. This changes non-reentrancy guarantee for the users of PREPARE[_DELAYED]_WORK() - if the function changes, reentrancy isn't guaranteed against the previous instance. Firewire depended on such nonreentrancy guarantee. This is fixed by doing the work item multiplexing from firewire proper while keeping the work function unchanged" * 'for-3.14-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: firewire: don't use PREPARE_DELAYED_WORK
2014-03-08Merge tag 'firewire-fixes' of ↵Linus Torvalds2-16/+5
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394 Pull firewire fixes from Stefan Richter: "Fix a use-after-free regression since v3.4 and an initialization regression since v3.10" * tag 'firewire-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: firewire: ohci: fix probe failure with Agere/LSI controllers firewire: net: fix use after free
2014-03-08Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds1-2/+34
git://git.linaro.org/people/mike.turquette/linux Pull clk driver fix from Mike Turquette: "Single fix for a clock driver merged in 3.14-rc1. Without this fix the CPU frequency cannot be scaled" * tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mike.turquette/linux: clk: shmobile: rcar-gen2: Use kick bit to allow Z clock frequency change
2014-03-08Merge tag 'pm+acpi-3.14-rc6' of ↵Linus Torvalds4-29/+103
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management fixes from Rafael Wysocki: - ACPI tables in some BIOSes list device resources with size equal to 0, which doesn't make sense, so we should ignore them, but instead we try to use them and mangle things completely. Fix from Zhang Rui. - Several models of Samsung laptops accumulate EC events when they are in sleep states which leads to EC buffer overflows that prevent new events from being signaled after system resume or reboot. This has been affecting many users for quite a while and may be addressed by clearing the EC buffer during system resume and system startup on those machines. From Kieran Clancy. - If the ACPI sleep control and status registers are not present (which happens if the Hardware Reduced ACPI mode bit is set in the ACPI tables, but also may result from BIOS bugs), we should not try to use ACPI to power off the system and ACPI S5 should not be listed as supported. Fix from Aubrey Li. - There's a race condition in cpufreq_get() that leads to a kernel crash if that function is called at a wrong time. Fix from Aaron Plattner. - cpufreq policy objects have to be initialized entirely before they are first accessed by their users which isn't the case currently and that potentially leads to various kinds of breakage that is difficult to debug. Fix from Viresh Kumar. - Locking is missing in __cpufreq_add_dev() which leads to a race condition that may trigger a kernel crash. Fix from Viresh Kumar. * tag 'pm+acpi-3.14-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / EC: Clear stale EC events on Samsung systems cpufreq: Initialize governor for a new policy under policy->rwsem cpufreq: Initialize policy before making it available for others to use cpufreq: use cpufreq_cpu_get() to avoid cpufreq_get() race conditions ACPI / sleep: pm_power_off needs more sanity checks to be installed ACPI / resources: ignore invalid ACPI device resources
2014-03-07x86: fix compile error due to X86_TRAP_NMI use in asm filesLinus Torvalds2-2/+2
It's an enum, not a #define, you can't use it in asm files. Introduced in commit 5fa10196bdb5 ("x86: Ignore NMIs that come in during early boot"), and sadly I didn't compile-test things like I should have before pushing out. My weak excuse is that the x86 tree generally doesn't introduce stupid things like this (and the ARM pull afterwards doesn't cause me to do a compile-test either, since I don't cross-compile). Cc: Don Zickus <dzickus@redhat.com> Cc: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-03-07Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds8-7/+37
Pull ARM fixes from Russell King: "A number of ARM updates for -rc, covering mostly ARM specific code, but with one change to modpost.c to allow Thumb section mismatches to be detected. ARM changes include reporting when an attempt is made to boot a LPAE kernel on hardware which does not support LPAE, rather than just being silent about it. A number of other minor fixes are included too" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 7992/1: boot: compressed: ignore bswapsdi2.S ARM: 7991/1: sa1100: fix compile problem on Collie ARM: fix noMMU kallsyms symbol filtering ARM: 7980/1: kernel: improve error message when LPAE config doesn't match CPU ARM: 7964/1: Detect section mismatches in thumb relocations ARM: 7963/1: mm: report both sections from PMD
2014-03-07Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds6-24/+67
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Peter Anvin: "A small collection of minor fixes. The FPU stuff is still pending, I fear. I haven't heard anything from Suresh so I suspect I'm going to have to dig into the init specifics myself and fix up the patchset" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Ignore NMIs that come in during early boot x86, trace: Further robustify CR2 handling vs tracing x86, trace: Fix CR2 corruption when tracing page faults x86/efi: Quirk out SGI UV
2014-03-07Merge branch 'merge' of ↵Linus Torvalds2-0/+10
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull power fixes from Ben Herrenschmidt: "Here are a couple of powerpc fixes for 3.14. One is (another!) nasty TM problem, we can crash the kernel by forking inside a transaction. The other one is a simple fix for an alignment issue which can hurt in LE mode" * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: Align p_dyn, p_rela and p_st symbols powerpc/tm: Fix crash when forking inside a transaction
2014-03-07Merge tag 'trace-fixes-v3.14-rc5' of ↵Linus Torvalds3-1/+22
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fix from Steven Rostedt: "In the past, I've had lots of reports about trace events not working. Developers would say they put a trace_printk() before and after the trace event but when they enable it (and the trace event said it was enabled) they would see the trace_printks but not the trace event. I was not able to reproduce this, but that's because I wasn't looking at the right location. Recently, another bug came up that showed the issue. If your kernel supports signed modules but allows for non-signed modules to be loaded, then when one is, the kernel will silently set the MODULE_FORCED taint on the module. Although, this taint happens without the need for insmod --force or anything of the kind, it labels the module with that taint anyway. If this tainted module has tracepoints, the tracepoints will be ignored because of the MODULE_FORCED taint. But no error message will be displayed. Worse yet, the event infrastructure will still be created letting users enable the trace event represented by the tracepoint, although that event will never actually be enabled. This is because the tracepoint infrastructure allows for non-existing tracepoints to be enabled for new modules to arrive and have their tracepoints set. Although there are several things wrong with the above, this change only addresses the creation of the trace event files for tracepoints that are not created when a module is loaded and is tainted. This change will print an error message about the module being tainted and not the trace events will not be created, and it does not create the trace event infrastructure" * tag 'trace-fixes-v3.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Do not add event files for modules that fail tracepoints
2014-03-07Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: - a bugfix for a long standing waitqueue race - a trivial fix for a missing include * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Include missing header file in irqdomain.c genirq: Remove racy waitqueue_active check
2014-03-07SUNRPC: Fix oops when trace sunrpc_task events in nfs clientDitang Chen1-2/+2
When tracking sunrpc_task events in nfs client, the clnt pointer may be NULL. [ 139.269266] BUG: unable to handle kernel NULL pointer dereference at 0000000000000004 [ 139.269915] IP: [<ffffffffa026f216>] ftrace_raw_event_rpc_task_running+0x86/0xf0 [sunrpc] [ 139.269915] PGD 1d293067 PUD 1d294067 PMD 0 [ 139.269915] Oops: 0000 [#1] SMP [ 139.269915] Modules linked in: nfsv4 dns_resolver nfs lockd sunrpc fscache sg ppdev e1000 serio_raw pcspkr parport_pc parport i2c_piix4 i2c_core microcode xfs libcrc32c sd_mod sr_mod cdrom ata_generic crc_t10dif crct10dif_common pata_acpi ahci libahci ata_piix libata dm_mirror dm_region_hash dm_log dm_mod [ 139.269915] CPU: 0 PID: 59 Comm: kworker/0:2 Not tainted 3.10.0-84.el7.x86_64 #1 [ 139.269915] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 139.269915] Workqueue: rpciod rpc_async_schedule [sunrpc] [ 139.269915] task: ffff88001b598000 ti: ffff88001b632000 task.ti: ffff88001b632000 [ 139.269915] RIP: 0010:[<ffffffffa026f216>] [<ffffffffa026f216>] ftrace_raw_event_rpc_task_running+0x86/0xf0 [sunrpc] [ 139.269915] RSP: 0018:ffff88001b633d70 EFLAGS: 00010206 [ 139.269915] RAX: ffff88001dfc5338 RBX: ffff88001cc37a00 RCX: ffff88001dfc5334 [ 139.269915] RDX: ffff88001dfc5338 RSI: 0000000000000000 RDI: ffff88001dfc533c [ 139.269915] RBP: ffff88001b633db0 R08: 000000000000002c R09: 000000000000000a [ 139.269915] R10: 0000000000062180 R11: 00000020759fb9dc R12: ffffffffa0292c20 [ 139.269915] R13: ffff88001dfc5334 R14: 0000000000000000 R15: 0000000000000000 [ 139.269915] FS: 0000000000000000(0000) GS:ffff88001fc00000(0000) knlGS:0000000000000000 [ 139.269915] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 139.269915] CR2: 0000000000000004 CR3: 000000001d290000 CR4: 00000000000006f0 [ 139.269915] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 139.269915] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 139.269915] Stack: [ 139.269915] 000000001b633d98 0000000000000246 ffff88001df1dc00 ffff88001cc37a00 [ 139.269915] ffff88001bc35e60 0000000000000000 ffff88001ffa0a48 ffff88001bc35ee0 [ 139.269915] ffff88001b633e08 ffffffffa02704b5 0000000000010000 ffff88001cc37a70 [ 139.269915] Call Trace: [ 139.269915] [<ffffffffa02704b5>] __rpc_execute+0x1d5/0x400 [sunrpc] [ 139.269915] [<ffffffffa0270706>] rpc_async_schedule+0x26/0x30 [sunrpc] [ 139.269915] [<ffffffff8107867b>] process_one_work+0x17b/0x460 [ 139.269915] [<ffffffff8107942b>] worker_thread+0x11b/0x400 [ 139.269915] [<ffffffff81079310>] ? rescuer_thread+0x3e0/0x3e0 [ 139.269915] [<ffffffff8107fc80>] kthread+0xc0/0xd0 [ 139.269915] [<ffffffff8107fbc0>] ? kthread_create_on_node+0x110/0x110 [ 139.269915] [<ffffffff815d122c>] ret_from_fork+0x7c/0xb0 [ 139.269915] [<ffffffff8107fbc0>] ? kthread_create_on_node+0x110/0x110 [ 139.269915] Code: 4c 8b 45 c8 48 8d 7d d0 89 4d c4 41 89 c9 b9 28 00 00 00 e8 9d b4 e9 e0 48 85 c0 49 89 c5 74 a2 48 89 c7 e8 9d 3f e9 e0 48 89 c2 <41> 8b 46 04 48 8b 7d d0 4c 89 e9 4c 89 e6 89 42 0c 0f b7 83 d4 [ 139.269915] RIP [<ffffffffa026f216>] ftrace_raw_event_rpc_task_running+0x86/0xf0 [sunrpc] [ 139.269915] RSP <ffff88001b633d70> [ 139.269915] CR2: 0000000000000004 [ 140.946406] ---[ end trace ba486328b98d7622 ]--- Signed-off-by: Ditang Chen <chendt.fnst@cn.fujitsu.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-03-08Merge branch 'pm-cpufreq'Rafael J. Wysocki1-28/+23
* pm-cpufreq: cpufreq: Initialize governor for a new policy under policy->rwsem cpufreq: Initialize policy before making it available for others to use cpufreq: use cpufreq_cpu_get() to avoid cpufreq_get() race conditions
2014-03-08Merge branches 'acpi-resources', 'acpi-ec' and 'acpi-sleep'Rafael J. Wysocki3-1/+80
* acpi-resources: ACPI / resources: ignore invalid ACPI device resources * acpi-ec: ACPI / EC: Clear stale EC events on Samsung systems * acpi-sleep: ACPI / sleep: pm_power_off needs more sanity checks to be installed
2014-03-07Merge tag 'dm-3.14-fixes-3' of ↵Linus Torvalds10-112/+425
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - dm-cache memory allocation failure fix - fix DM's Kconfig identation - dm-snapshot metadata corruption fix for bug introduced in 3.14-rc1 - important refcount < 0 fix for the DM persistent data library's space map metadata interface which fixes corruption reported by a few dm-thinp users and last but not least: - more extensive fixes than ideal for dm-thinp's data resize capability (which has had growing pain much like we've seen from -ENOSPC handling of filesystems that mature). The end result is dm-thinp now handles metadata operation failure and no data space error conditions much better than before. * tag 'dm-3.14-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm space map metadata: fix refcount decrement below 0 which caused corruption dm thin: fix Documentation for held metadata root feature dm thin: fix noflush suspend IO queueing dm thin: fix deadlock in __requeue_bio_list dm thin: fix out of data space handling dm thin: ensure user takes action to validate data and metadata consistency dm thin: synchronize the pool mode during suspend dm snapshot: fix metadata corruption dm: fix Kconfig indentation dm cache mq: fix memory allocation failure for large cache devices
2014-03-07x86: Ignore NMIs that come in during early bootH. Peter Anvin2-2/+11
Don Zickus reports: A customer generated an external NMI using their iLO to test kdump worked. Unfortunately, the machine hung. Disabling the nmi_watchdog made things work. I speculated the external NMI fired, caused the machine to panic (as expected) and the perf NMI from the watchdog came in and was latched. My guess was this somehow caused the hang. ---- It appears that the latched NMI stays latched until the early page table generation on 64 bits, which causes exceptions to happen which end in IRET, which re-enable NMI. Therefore, ignore NMIs that come in during early execution, until we have proper exception handling. Reported-and-tested-by: Don Zickus <dzickus@redhat.com> Link: http://lkml.kernel.org/r/1394221143-29713-1-git-send-email-dzickus@redhat.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: <stable@vger.kernel.org> # v3.5+, older with some backport effort
2014-03-07ARM: 7992/1: boot: compressed: ignore bswapsdi2.SMark Rutland1-0/+1
Commit 017f161a55b4 (ARM: 7877/1: use built-in byte swap function) added bswapsdi2.{o,S} to arch/arm/boot/compressed/Makefile, but didn't update the .gitignore. Thus after a a build git status shows bswapsdi2.S as a new file, which is a little annoying. This patch updates arch/arm/boot/compressed/.gitignore to ignore bswapsdi2.S, as we already do for ashldi3.S and others. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Kim Phillips <kim.phillips@freescale.com> Cc: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-03-07ARM: 7991/1: sa1100: fix compile problem on CollieLinus Walleij1-0/+2
Due to a problem in the MFD Kconfig it was not possible to compile the UCB battery driver for the Collie SA1100 system, in turn making it impossible to compile in the battery driver. (See patch "mfd: include all drivers in subsystem menu".) After fixing the MFD Kconfig (separate patch) a compile error appears in the Collie battery driver due to the <mach/collie.h> implicitly requiring <mach/hardware.h> through <linux/gpio.h> via <mach/gpio.h> prior to commit 40ca061b "ARM: 7841/1: sa1100: remove complex GPIO interface". Fix this up by including the required header into <mach/collie.h>. Cc: stable@vger.kernel.org Cc: Andrea Adami <andrea.adami@gmail.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-03-07ARM: fix noMMU kallsyms symbol filteringRussell King2-6/+5
With noMMU, CONFIG_PAGE_OFFSET was not being set correctly. As there's no MMU, PAGE_OFFSET should be equal to PHYS_OFFSET in all cases. This commit makes that explicit. Since we do this, we don't need to mess around in asm/memory.h with ifdefs to sort this out, so let's get rid of that, and there's no point offering the "Memory split" option for noMMU as that's meaningless there. Fixes: b9b32bf70f2f ("ARM: use linker magic for vectors and vector stubs") Cc: <stable@vger.kernel.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-03-07Revert "USBNET: ax88179_178a: enable tso if usb host supports sg dma"Mathias Nyman1-8/+0
This reverts commit 3804fad45411b48233b48003e33a78f290d227c8. This commit, together with commit 247bf557273dd775505fb9240d2d152f4f20d304 "xhci 1.0: Limit arbitrarily-aligned scatter gather." were origially added to get xHCI 1.0 hosts and usb ethernet ax88179_178a devices working together with scatter gather. xHCI 1.0 hosts pose some requirement on how transfer buffers are aligned, setting this requirement for 1.0 hosts caused USB 3.0 mass storage devices to fail more frequently. USB 3.0 mass storage devices used to work before 3.14-rc1. Theoretically, the TD fragment rules could have caused an occasional disk glitch. Now the devices *will* fail, instead of theoretically failing. >From a user perspective, this looks like a regression; the USB device obviously fails on 3.14-rc1, and may sometimes silently fail on prior kernels. The proper soluition is to implement the TD fragment rules for xHCI 1.0 hosts, but for now, revert this patch until scatter gather can be properly supported. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-07Revert "xhci 1.0: Limit arbitrarily-aligned scatter gather."Mathias Nyman1-11/+3
This reverts commit 247bf557273dd775505fb9240d2d152f4f20d304. This commit, together with commit 3804fad45411b48233b48003e33a78f290d227c8 "USBNET: ax88179_178a: enable tso if usb host supports sg dma" were origially added to get xHCI 1.0 hosts and usb ethernet ax88179_178a devices working together with scatter gather. xHCI 1.0 hosts pose some requirement on how transfer buffers are aligned, setting this requirement for 1.0 hosts caused USB 3.0 mass storage devices to fail more frequently. USB 3.0 mass storage devices used to work before 3.14-rc1. Theoretically, the TD fragment rules could have caused an occasional disk glitch. Now the devices *will* fail, instead of theoretically failing. >From a user perspective, this looks like a regression; the USB device obviously fails on 3.14-rc1, and may sometimes silently fail on prior kernels. The proper soluition is to implement the TD fragment rules required, but for now this patch needs to be reverted to get USB 3.0 mass storage devices working at the level they used to. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-03-07usb: Make DELAY_INIT quirk wait 100ms between Get Configuration requestsJulius Werner1-0/+4
The DELAY_INIT quirk only reduces the frequency of enumeration failures with the Logitech HD Pro C920 and C930e webcams, but does not quite eliminate them. We have found that adding a delay of 100ms between the first and second Get Configuration request makes the device enumerate perfectly reliable even after several weeks of extensive testing. The reasons for that are anyone's guess, but since the DELAY_INIT quirk already delays enumeration by a whole second, wating for another 10th of that isn't really a big deal for the one other device that uses it, and it will resolve the problems with these webcams. Signed-off-by: Julius Werner <jwerner@chromium.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-19 17:34:46 +0000