summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2017-04-08nvmem: imx-ocotp: clear error bit after reading locked valuesRichard Leitner1-3/+38
When reading a "read locked" value from the OCOTP controller on i.MX6 SoC's an error bit is set. This bit has to be cleared by software before any new write, read or reload access can be issued. Therefore clear it after we detect such an "locked read". Signed-off-by: Richard Leitner <richard.leitner@skidata.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08nvmem: octop: Add i.MX7D supportPeng Fan1-0/+1
Add i.MX7D support. There is 16 banks, each bank 4 words. Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08dt-bindings: imx-ocotp: add compatible string for i.MX7D/SPeng Fan1-0/+1
Add compatible string for i.MX7D/S Signed-off-by: Peng Fan <peng.fan@nxp.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08dt-bindings: nvmem: Add i.MX IIM binding docSascha Hauer1-0/+22
The IIM is part of the i.MX device trees for long already, add a binding document for it. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08nvmem: Add driver for the i.MX IIMMichael Grzeschik3-0/+186
This adds a readonly nvmem driver for the i.MX IC Identification Module (IIM). The IIM is found on the older i.MX SoCs like the i.MX25, i.MX27, i.MX31, i.MX35, i.MX51 and the i.MX53. The IIM can control up to 8 fuse banks with 256 bit each. Not all of the banks are equipped on the different SoCs. The actual number of fuses differ from 512 on the i.MX27 and 1152 on the i.MX53. The fuses are one time writable, but writing is currently not supported in the driver. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08nvmem: imx-ocotp: fix usage of "dev" pointersRichard Leitner1-1/+3
Assign the correct dev pointer to struct ocotp_priv during probe. This is needed to display dev_* messages correctly. Furthermore harmonize the usage of dev (instead of &pdev->dev) in the probe function. Signed-off-by: Richard Leitner <richard.leitner@skidata.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08nvmem: sunxi-sid: add support for H3's SID controllerIcenowy Zheng2-1/+67
The H3 SoC have a bigger SID controller, which has its direct read address at 0x200 position in the SID block, not 0x0. Also, H3 SID controller has some silicon bug that makes the direct read value wrong at cold boot, add code to workaround the bug. (This bug has already been fixed on A64 and later SoCs) Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08nvmem: sunxi-sid: read NVMEM size from device compatibleIcenowy Zheng1-4/+23
Sometimes the SID device have more memory address space than the real NVMEM size (for the registers used to read/write the SID). Fetch the NVMEM size from device compatible, rather than the memory address space's length, in order to prepare for adding some registers-based read support. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08nvmem: core: Allow allocating several anonymous nvmem devicesAban Bedel1-1/+2
Currently the nvmem core expect the config to provide a name and ID that are then used to create the device name. When no device name is given 'nvmem' is used. However if there is several such anonymous devices they all get named 'nvmem0', which doesn't work. To fix this problem use the ID from the config only when the config also provides a name. When no name is provided take the uinque ID of the nvmem device instead. Signed-off-by: Aban Bedel <albeu@free.fr> Reviewed-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08MAINTAINERS: nvmem: Remove myself from maintainersMaxime Ripard1-1/+0
I've never been really been maintaining nvmem, so make that official. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08fpga: Add support for Xilinx LogiCORE PR DecouplerMoritz Fischer3-0/+172
This adds support for the Xilinx LogiCORE PR Decoupler soft-ip that does decoupling of PR regions in the FPGA fabric during partial reconfiguration. Signed-off-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Cc: Sören Brinkmann <soren.brinkmann@xilinx.com> Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Acked-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08auxdisplay: Move arm-charlcd.c to drivers/auxdisplay folderAndy Shevchenko5-11/+11
It looks like arm-charlcd.c belongs to auxdisplay subsystem. Move it to drivers/auxdisplay folder. No functional changes intended. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08auxdisplay: Move panel.c to drivers/auxdisplay folderAndy Shevchenko5-281/+281
It looks like panel.c belongs to auxdisplay subsystem. Move it to drivers/auxdisplay folder. No functional changes intended. Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08auxdisplay: ht16k33: use le16_to_cpup() to fetch LE16 dataDmitry Torokhov1-4/+8
The data read from the device is 3 little-endian words, so let's annotate them as such and use le16_to_cpu() to convert them to host endianness - it might turn out to be a bit more performant, and it expresses the conversion more clearly. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08auxdisplay: img-ascii-lcd: Fix module autoloadJavier Martinez Canillas1-0/+1
If the driver is built as a module, autoload won't work because the module alias information is not filled. So user-space can't match the registered device with the corresponding module. Export the module alias information using the MODULE_DEVICE_TABLE() macro. Before this patch: $ modinfo drivers/auxdisplay/img-ascii-lcd.ko | grep alias $ After this patch: $ modinfo drivers/auxdisplay/img-ascii-lcd.ko | grep alias alias: of:N*T*Cmti,sead3-lcdC* alias: of:N*T*Cmti,sead3-lcd alias: of:N*T*Cmti,malta-lcdC* alias: of:N*T*Cmti,malta-lcd alias: of:N*T*Cimg,boston-lcdC* alias: of:N*T*Cimg,boston-lcd Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08auxdisplay: ht16k33: don't access uninitialized dataArnd Bergmann1-1/+7
gcc-7.0.1 points out that we copy uninitialized data from the stack into a per-device structure: drivers/auxdisplay/ht16k33.c: In function 'ht16k33_keypad_irq_thread': arch/x86/include/asm/string_32.h:78:16: error: 'new_state' may be used uninitialized in this function [-Werror=maybe-uninitialized] arch/x86/include/asm/string_32.h:79:22: error: '*((void *)&new_state+4)' may be used uninitialized in this function [-Werror=maybe-uninitialized] The access is harmless because we never read the data, but we are better off not doing this, so this changes the code to only copy the data that was actually initialized. To make sure we don't overflow the stack with an incorrect DT, we also need to add a sanity checkin the probe function. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Robin van der Gracht <robin@protonic.nl> Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08auxdisplay: hd44780: Fix DT properties to include units of measurementGeert Uytterhoeven2-7/+9
DT properties specifying physical properties should contain appropriate suffices indicating the units of measurement. Hence amend the HD44780 DT bindings to add "chars" suffixes to the "display-height" and "display-width" properties, and update the driver to parse them. Fixes: dd9502a9e9156dd8 ("dt-bindings: auxdisplay: Add bindings for Hitachi HD44780") Fixes: d47d88361feea2ce ("auxdisplay: Add HD44780 Character LCD support") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08MAINTAINERS: fpga: update email and directory pathsAlan Tull1-2/+3
A few updates: * Updating my email address * Adding another docs directory: Documentation/fpga * Making the include path not specific to fpga-mgr.h only Signed-off-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08MAINTAINERS: Add file patterns for fpga device tree bindingsGeert Uytterhoeven1-0/+1
Submitters of device tree binding documentation may forget to CC the subsystem maintainer if this is missing. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Moritz Fischer <moritz.fischer@ettus.com> Cc: Alan Tull <atull@opensource.altera.com> Cc: Moritz Fischer <moritz.fischer@ettus.com> Cc: linux-fpga@vger.kernel.org Acked-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08fpga pr ip: Platform driver for Altera Partial Reconfiguration IP.Matthew Gerlach3-0/+76
This adds a platform bus driver for a fpga-mgr driver that uses the Altera Partial Reconfiguration IP component. Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com> Acked-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08fpga dt: bindings for Altera Partial Reconfiguration IP.Matthew Gerlach1-0/+12
Device Tree bindings for Altera Partial Reconfiguration IP. Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08fpga pr ip: Core driver support for Altera Partial Reconfiguration IP.Matthew Gerlach4-0/+255
Adding the core functions necessary for a fpga-mgr driver for the Altera Partial IP component. It is intended for these functions to be used by the various bus implementations like the platform bus or the PCIe bus. Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com> Acked-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08fpga: add config complete timeoutAlan Tull2-0/+6
Adding timeout for maximum allowed time for FPGA to go to operating mode after a FPGA region has been programmed. Signed-off-by: Alan Tull <atull@opensource.altera.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08fpga manager: Add Xilinx slave serial SPI driverAnatolij Gustschin3-0/+206
The driver loads FPGA firmware over SPI, using the "slave serial" configuration interface on Xilinx FPGAs. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Moritz Fischer <mdf@kernel.org> Acked-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08dt: bindings: fpga: add xilinx slave-serial binding descriptionAnatolij Gustschin1-0/+44
Add dt binding documentation details for Xilinx FPGA configuration over slave serial interface. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Moritz Fischer <mdf@kernel.org> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08fpga: altera_freeze_bridge: Constify opsMoritz Fischer1-1/+1
The ops are not changing, make them const. Signed-off-by: Moritz Fischer <mdf@kernel.org> Cc: Alan Tull <atull@kernel.org> Cc: linux-kernel@vger.kernel.org Cc: linux-fpga@vger.kernel.org Acked-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08coresight: Fixes coresight DT parse to get correct output port ID.Mike Leach1-1/+1
Corrected to get the port numbering to allow programmable replicator driver to operate correctly. By convention, CoreSight devices number ports, not endpoints in the .dts files:- port { reg<N> endpoint { } } Existing code read endpoint number - always 0x0, rather than the correct port number. Signed-off-by: Mike Leach <mike.leach@linaro.org> Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08mei: implement fsyncAlexander Usyskin1-0/+72
When write() returns successfully, it is only assumed that a message was successfully queued. Add fsync syscall implementation to help user-space ensure that all data is written. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08mei: bus: elminate variable length arraysTomas Winkler1-4/+5
Though VLA are supported by CC99 there are many cavities and should be avoided. 'const size_t len = sizeof()' that we used may not be set at the compile time hence generating VLA code. This fixes also sparse warning warning: Variable length array is used type. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08mei: hbm: remove variable length arraysTomas Winkler1-15/+14
Though VLA are supported by CC99 there are many cavities and should be avoided. 'const size_t len = sizeof()' that we used may not be set at the compile time hence generating VLA code. This fixes also sparse warning warning: Variable length array is used type. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08mei: drop amthif internal clientAlexander Usyskin9-507/+15
AMTHIF has special support in the mei drive, it handles multiplexing multiple user space connection above single me client connection. Since there is no additional addressing information there is a strict requirement on the traffic order on each connection and on the "read after write" order within the connection. This creates a lot of complexity mostly because the other client types do not necessarily fall under the same restriction. After carefully studying the use of the AMTHIF client, we came to conclusion that the multiplexing is not really utilized by any application and we may safely remove that support and significantly simplify the driver. Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08mei: add pci driver ops shutdown handler.Tomas Winkler2-3/+57
The shutdown handler quiesces the device, it performs link reset in order to close all connections and notify the device that is not longer managed by the driver. This is essentially a stripped down version of the PCI remove() function where only the necessary amount of work is done to stop any further activity. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08aspeed-lpc-ctrl: include linux/types.h for uapi headerArnd Bergmann1-0/+1
The newly added header file triggers a sanity check: usr/include/linux/aspeed-lpc-ctrl.h:44: found __[us]{8,16,32,64} type without #include <linux/types.h> We should include linux/types.h explicitly to ensure the header can be included from user space. Fixes: 6c4e97678501 ("drivers/misc: Add Aspeed LPC control driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-08drivers/misc: aspeed-lpc-ctrl: fix printk format warning againArnd Bergmann1-2/+1
The format string is still broken after the first attempt to fix it: drivers/misc/aspeed-lpc-ctrl.c: In function 'aspeed_lpc_ctrl_probe': drivers/misc/aspeed-lpc-ctrl.c:232:17: error: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t {aka long long unsigned int}' [-Werror=format=] We can actually just print the resource structure directly here. Fixes: 132c93d4215c ("drivers/misc: Aspeed LPC control fix compile error and warning") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-27Merge 4.11-rc4 into char-misc-nextGreg Kroah-Hartman727-5625/+9277
We want the char-misc fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-26Linux 4.11-rc4v4.11-rc4Linus Torvalds1-1/+1
2017-03-26Merge tag 'char-misc-4.11-rc4' of ↵Linus Torvalds21-88/+111
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "A smattering of different small fixes for some random driver subsystems. Nothing all that major, just resolutions for reported issues and bugs. All have been in linux-next with no reported issues" * tag 'char-misc-4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (21 commits) extcon: int3496: Set the id pin to direction-input if necessary extcon: int3496: Use gpiod_get instead of gpiod_get_index extcon: int3496: Add dependency on X86 as it's Intel specific extcon: int3496: Add GPIO ACPI mapping table extcon: int3496: Rename GPIO pins in accordance with binding vmw_vmci: handle the return value from pci_alloc_irq_vectors correctly ppdev: fix registering same device name parport: fix attempt to write duplicate procfiles auxdisplay: img-ascii-lcd: add missing sentinel entry in img_ascii_lcd_matches Drivers: hv: vmbus: Don't leak memory when a channel is rescinded Drivers: hv: vmbus: Don't leak channel ids Drivers: hv: util: don't forget to init host_ts.lock Drivers: hv: util: move waiting for release to hv_utils_transport itself vmbus: remove hv_event_tasklet_disable/enable vmbus: use rcu for per-cpu channel list mei: don't wait for os version message reply mei: fix deadlock on mei reset intel_th: pci: Add Gemini Lake support intel_th: pci: Add Denverton SOC support intel_th: Don't leak module refcount on failure to activate ...
2017-03-26Merge tag 'driver-core-4.11-rc4' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fix from Greg KH: "Here is a single kernfs fix for 4.11-rc4 that resolves a reported issue. It has been in linux-next with no reported issues" * tag 'driver-core-4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: kernfs: Check KERNFS_HAS_RELEASE before calling kernfs_release_file()
2017-03-26Merge tag 'tty-4.11-rc4' of ↵Linus Torvalds4-75/+30
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver fixes from Greg KH: "Here are some tty and serial driver fixes for 4.11-rc4. One of these fix a long-standing issue in the ldisc code that was found by Dmitry Vyukov with his great fuzzing work. The other fixes resolve other reported issues, and there is one revert of a patch in 4.11-rc1 that wasn't correct. All of these have been in linux-next for a while with no reported issues" * tag 'tty-4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: fix data race in tty_ldisc_ref_wait() tty: don't panic on OOM in tty_set_ldisc() Revert "tty: serial: pl011: add ttyAMA for matching pl011 console" tty: acpi/spcr: QDF2400 E44 checks for wrong OEM revision serial: 8250_dw: Fix breakage when HAVE_CLK=n serial: 8250_dw: Honor clk_round_rate errors in dw8250_set_termios
2017-03-26Merge tag 'staging-4.11-rc4' of ↵Linus Torvalds5-9/+20
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull IIO driver fixes from Greg KH: "Here are some small IIO driver fixes for 4.11-rc4 that resolve a number of tiny reported issues. All of these have been in linux-next for a while with no reported issues" * tag 'staging-4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: iio: imu: st_lsm6dsx: fix FIFO_CTRL2 overwrite during watermark configuration iio: adc: ti_am335x_adc: fix fifo overrun recovery iio: sw-device: Fix config group initialization iio: magnetometer: ak8974: remove incorrect __exit markups iio: hid-sensor-trigger: Change get poll value function order to avoid sensor properties losing after resume from S3
2017-03-26Merge tag 'usb-4.11-rc4' of ↵Linus Torvalds26-247/+141
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY fixes from Greg KH: "Here are a number of small USB and PHY driver fixes for 4.11-rc4. Nothing major here, just an bunch of small fixes, and a handfull of good fixes from Johan for devices with crazy descriptors. There are a few new device ids in here as well. All of these have been in linux-next with no reported issues" * tag 'usb-4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (26 commits) usb: gadget: f_hid: fix: Don't access hidg->req without spinlock held usb: gadget: udc: remove pointer dereference after free usb: gadget: f_uvc: Sanity check wMaxPacketSize for SuperSpeed usb: gadget: f_uvc: Fix SuperSpeed companion descriptor's wBytesPerInterval usb: gadget: acm: fix endianness in notifications usb: dwc3: gadget: delay unmap of bounced requests USB: serial: qcserial: add Dell DW5811e usb: hub: Fix crash after failure to read BOS descriptor ACM gadget: fix endianness in notifications USB: usbtmc: fix probe error path USB: usbtmc: add missing endpoint sanity check USB: serial: option: add Quectel UC15, UC20, EC21, and EC25 modems usb: musb: fix possible spinlock deadlock usb: musb: dsps: fix iounmap in error and exit paths usb: musb: cppi41: don't check early-TX-interrupt for Isoch transfer usb-core: Add LINEAR_FRAME_INTR_BINTERVAL USB quirk uwb: i1480-dfu: fix NULL-deref at probe uwb: hwa-rc: fix NULL-deref at probe USB: wusbcore: fix NULL-deref at probe USB: uss720: fix NULL-deref at probe ...
2017-03-26Merge tag 'powerpc-4.11-6' of ↵Linus Torvalds4-14/+26
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull more powerpc fixes from Michael Ellerman: "These are all pretty minor. The fix for idle wakeup would be a bad bug but has not been observed in practice. The update to the gcc-plugins docs was Cc'ed to Kees and Jon, Kees OK'ed it going via powerpc and I didn't hear from Jon. - cxl: Route eeh events to all slices for pci_channel_io_perm_failure state - powerpc/64s: Fix idle wakeup potential to clobber registers - Revert "powerpc/64: Disable use of radix under a hypervisor" - gcc-plugins: update architecture list in documentation Thanks to: Andrew Donnellan, Nicholas Piggin, Paul Mackerras, Vaibhav Jain" * tag 'powerpc-4.11-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: gcc-plugins: update architecture list in documentation Revert "powerpc/64: Disable use of radix under a hypervisor" powerpc/64s: Fix idle wakeup potential to clobber registers cxl: Route eeh events to all slices for pci_channel_io_perm_failure state
2017-03-26Merge tag 'ext4_for_linus_stable' of ↵Linus Torvalds6-50/+47
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 fixes from Ted Ts'o: "Fix a memory leak on an error path, and two races when modifying inodes relating to the inline_data and metadata checksum features" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix two spelling nits ext4: lock the xattr block before checksuming it jbd2: don't leak memory if setting up journal fails ext4: mark inode dirty after converting inline directory
2017-03-25Merge tag 'fscrypt-for-linus_stable' of ↵Linus Torvalds7-71/+15
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt Pull fscrypto fixes from Ted Ts'o: "A code cleanup and bugfix for fs/crypto" * tag 'fscrypt-for-linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt: fscrypt: eliminate ->prepare_context() operation fscrypt: remove broken support for detecting keyring key revocation
2017-03-25Merge tag 'hwmon-for-linus-v4.11-rc4' of ↵Linus Torvalds4-6/+24
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fixes from Guenter Roeck: - bug fixes in asus_atk0110, it87 and max31790 drivers - added missing API definition to hwmon core * tag 'hwmon-for-linus-v4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (asus_atk0110) fix uninitialized data access hwmon: Add missing HWMON_T_ALARM hwmon: (it87) Avoid registering the same chip on both SIO addresses hwmon: (max31790) Set correct PWM value
2017-03-25Merge tag 'for-linus' of ↵Linus Torvalds18-69/+110
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull rdma fixes from Doug Ledford: "This has been a slow -rc cycle for the RDMA subsystem. We really haven't had a lot of rc fixes come in. This pull request is the first of this entire rc cycle and it has all of the suitable fixes so far and it's still only about 20 patches. The fix for the minor breakage cause by the dma mapping patchset is in here, as well as a couple other potential oops fixes, but the rest is more minor. Summary: - fix for dma_ops change in this kernel, resolving the s390, powerpc, and IOMMU operation - a few other oops fixes - the rest are all minor fixes" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: IB/qib: fix false-postive maybe-uninitialized warning RDMA/iser: Fix possible mr leak on device removal event IB/device: Convert ib-comp-wq to be CPU-bound IB/cq: Don't process more than the given budget IB/rxe: increment msn only when completing a request uapi: fix rdma/mlx5-abi.h userspace compilation errors IB/core: Restore I/O MMU, s390 and powerpc support IB/rxe: Update documentation link RDMA/ocrdma: fix a type issue in ocrdma_put_pd_num() IB/rxe: double free on error RDMA/vmw_pvrdma: Activate device on ethernet link up RDMA/vmw_pvrdma: Dont hardcode QP header page RDMA/vmw_pvrdma: Cleanup unused variables infiniband: Fix alignment of mmap cookies to support VIPT caching IB/core: Protect against self-requeue of a cq work item i40iw: Receive netdev events post INET_NOTIFIER state
2017-03-25Merge branch 'stable-4.11' of git://git.infradead.org/users/pcmoore/auditLinus Torvalds3-255/+399
Pull audit fix from Paul Moore: "We've got an audit fix, and unfortunately it is big. While I'm not excited that we need to be sending you something this large during the -rcX phase, it does fix some very real, and very tangled, problems relating to locking, backlog queues, and the audit daemon connection. This code has passed our testsuite without problem and it has held up to my ad-hoc stress tests (arguably better than the existing code), please consider pulling this as fix for the next v4.11-rcX tag" * 'stable-4.11' of git://git.infradead.org/users/pcmoore/audit: audit: fix auditd/kernel connection state tracking
2017-03-25ext4: fix two spelling nitsTheodore Ts'o2-2/+2
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-03-25ext4: lock the xattr block before checksuming itTheodore Ts'o1-34/+31
We must lock the xattr block before calculating or verifying the checksum in order to avoid spurious checksum failures. https://bugzilla.kernel.org/show_bug.cgi?id=193661 Reported-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org
2017-03-25Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds8-8/+25
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "A handful of Sunxi and Rockchip clk driver fixes and a core framework one where we need to copy a string because we can't guarantee it isn't freed sometime later" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: sunxi-ng: fix recalc_rate formula of NKMP clocks clk: sunxi-ng: Fix div/mult settings for osc12M on A64 clk: rockchip: Make uartpll a child of the gpll on rk3036 clk: rockchip: add "," to mux_pll_src_apll_dpll_gpll_usb480m_p on rk3036 clk: core: Copy connection id dt-bindings: arm: update Armada CP110 system controller binding clk: sunxi-ng: sun6i: Fix enable bit offset for hdmi-ddc module clock clk: sunxi: ccu-sun5i needs nkmp clk: sunxi-ng: mp: Adjust parent rate for pre-dividers
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-09 08:14:57 +0000