summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2016-09-08Merge tag 'armsoc-fixes' of ↵Linus Torvalds37-109/+172
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "This is a slightly larger batch of fixes that we've been sitting on a few -rcs. Most of them are simple oneliners, but there are two sets that are slightly larger and worth pointing out: - A set of patches to OMAP to deal with hwmod for RTC on am33xx (beaglebone SoC, among others). It's the only clock that ever has a valid offset of 0, so a new flag needed introduction once this problem was discovered. - A collection of CCI fixes for performance counters discovered once people started using it on X-Gene CPUs" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (37 commits) arm-cci: pmu: Fix typo in event name Revert "ARM: tegra: fix erroneous address in dts" ARM: dts: imx6qdl: Fix SPDIF regression ARM: imx6: add missing BM_CLPCR_BYPASS_PMIC_READY setting for imx6sx ARM: dts: imx7d-sdb: fix ti,x-plate-ohms property name ARM: dts: kirkwood: Fix PCIe label on OpenRD ARM: kirkwood: ib62x0: fix size of u-boot environment partition bus: arm-ccn: make event groups reliable bus: arm-ccn: fix hrtimer registration bus: arm-ccn: fix PMU interrupt flags ARM: tegra: Correct polarity for Tegra114 PMIC interrupt MAINTAINERS: add tree entry for ARM/UniPhier architecture ARM: sun5i: Fix typo in trip point temperature MAINTAINERS: Switch to kernel.org account for Krzysztof Kozlowski ARM: imx6ul: populates platform device at .init_machine bus: arm-ccn: Add missing event attribute exclusions for host/guest bus: arm-ccn: Correct required arguments for XP PMU events bus: arm-ccn: Fix XP watchpoint settings bitmask bus: arm-ccn: Do not attempt to configure XPs for cycle counter bus: arm-ccn: Fix PMU handling of MN ...
2016-09-08staging: android: ion: Pull out ion ioctls to a separate fileLaura Abbott4-205/+245
The number of Ion ioctls may continue to grow along with necessary validation. Pull it out into a separate file for easier management and review. Signed-off-by: Laura Abbott <labbott@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-08Documentation: i2c: slave-interface: add note for driver developmentWolfram Sang1-0/+5
Make it clear that adding slave support shall not disable master functionality. We can have both, so we should. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-09-08i2c: mux: demux-pinctrl: run properly with multiple instancesWolfram Sang1-4/+10
We can't use a static property for all the changesets, so we now create dynamic ones for each changeset. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Fixes: 50a5ba87690814 ("i2c: mux: demux-pinctrl: add driver") Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2016-09-08ALSA: rawmidi: Fix possible deadlock with virmidi registrationTakashi Iwai1-1/+3
When a seq-virmidi driver is initialized, it registers a rawmidi instance with its callback to create an associated seq kernel client. Currently it's done throughly in rawmidi's register_mutex context. Recently it was found that this may lead to a deadlock another rawmidi device that is being attached with the sequencer is accessed, as both open with the same register_mutex. This was actually triggered by syzkaller, as Dmitry Vyukov reported: ====================================================== [ INFO: possible circular locking dependency detected ] 4.8.0-rc1+ #11 Not tainted ------------------------------------------------------- syz-executor/7154 is trying to acquire lock: (register_mutex#5){+.+.+.}, at: [<ffffffff84fd6d4b>] snd_rawmidi_kernel_open+0x4b/0x260 sound/core/rawmidi.c:341 but task is already holding lock: (&grp->list_mutex){++++.+}, at: [<ffffffff850138bb>] check_and_subscribe_port+0x5b/0x5c0 sound/core/seq/seq_ports.c:495 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&grp->list_mutex){++++.+}: [<ffffffff8147a3a8>] lock_acquire+0x208/0x430 kernel/locking/lockdep.c:3746 [<ffffffff863f6199>] down_read+0x49/0xc0 kernel/locking/rwsem.c:22 [< inline >] deliver_to_subscribers sound/core/seq/seq_clientmgr.c:681 [<ffffffff85005c5e>] snd_seq_deliver_event+0x35e/0x890 sound/core/seq/seq_clientmgr.c:822 [<ffffffff85006e96>] > snd_seq_kernel_client_dispatch+0x126/0x170 sound/core/seq/seq_clientmgr.c:2418 [<ffffffff85012c52>] snd_seq_system_broadcast+0xb2/0xf0 sound/core/seq/seq_system.c:101 [<ffffffff84fff70a>] snd_seq_create_kernel_client+0x24a/0x330 sound/core/seq/seq_clientmgr.c:2297 [< inline >] snd_virmidi_dev_attach_seq sound/core/seq/seq_virmidi.c:383 [<ffffffff8502d29f>] snd_virmidi_dev_register+0x29f/0x750 sound/core/seq/seq_virmidi.c:450 [<ffffffff84fd208c>] snd_rawmidi_dev_register+0x30c/0xd40 sound/core/rawmidi.c:1645 [<ffffffff84f816d3>] __snd_device_register.part.0+0x63/0xc0 sound/core/device.c:164 [< inline >] __snd_device_register sound/core/device.c:162 [<ffffffff84f8235d>] snd_device_register_all+0xad/0x110 sound/core/device.c:212 [<ffffffff84f7546f>] snd_card_register+0xef/0x6c0 sound/core/init.c:749 [<ffffffff85040b7f>] snd_virmidi_probe+0x3ef/0x590 sound/drivers/virmidi.c:123 [<ffffffff833ebf7b>] platform_drv_probe+0x8b/0x170 drivers/base/platform.c:564 ...... -> #0 (register_mutex#5){+.+.+.}: [< inline >] check_prev_add kernel/locking/lockdep.c:1829 [< inline >] check_prevs_add kernel/locking/lockdep.c:1939 [< inline >] validate_chain kernel/locking/lockdep.c:2266 [<ffffffff814791f4>] __lock_acquire+0x4d44/0x4d80 kernel/locking/lockdep.c:3335 [<ffffffff8147a3a8>] lock_acquire+0x208/0x430 kernel/locking/lockdep.c:3746 [< inline >] __mutex_lock_common kernel/locking/mutex.c:521 [<ffffffff863f0ef1>] mutex_lock_nested+0xb1/0xa20 kernel/locking/mutex.c:621 [<ffffffff84fd6d4b>] snd_rawmidi_kernel_open+0x4b/0x260 sound/core/rawmidi.c:341 [<ffffffff8502e7c7>] midisynth_subscribe+0xf7/0x350 sound/core/seq/seq_midi.c:188 [< inline >] subscribe_port sound/core/seq/seq_ports.c:427 [<ffffffff85013cc7>] check_and_subscribe_port+0x467/0x5c0 sound/core/seq/seq_ports.c:510 [<ffffffff85015da9>] snd_seq_port_connect+0x2c9/0x500 sound/core/seq/seq_ports.c:579 [<ffffffff850079b8>] snd_seq_ioctl_subscribe_port+0x1d8/0x2b0 sound/core/seq/seq_clientmgr.c:1480 [<ffffffff84ffe9e4>] snd_seq_do_ioctl+0x184/0x1e0 sound/core/seq/seq_clientmgr.c:2225 [<ffffffff84ffeae8>] snd_seq_kernel_client_ctl+0xa8/0x110 sound/core/seq/seq_clientmgr.c:2440 [<ffffffff85027664>] snd_seq_oss_midi_open+0x3b4/0x610 sound/core/seq/oss/seq_oss_midi.c:375 [<ffffffff85023d67>] snd_seq_oss_synth_setup_midi+0x107/0x4c0 sound/core/seq/oss/seq_oss_synth.c:281 [<ffffffff8501b0a8>] snd_seq_oss_open+0x748/0x8d0 sound/core/seq/oss/seq_oss_init.c:274 [<ffffffff85019d8a>] odev_open+0x6a/0x90 sound/core/seq/oss/seq_oss.c:138 [<ffffffff84f7040f>] soundcore_open+0x30f/0x640 sound/sound_core.c:639 ...... other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&grp->list_mutex); lock(register_mutex#5); lock(&grp->list_mutex); lock(register_mutex#5); *** DEADLOCK *** ====================================================== The fix is to simply move the registration parts in snd_rawmidi_dev_register() to the outside of the register_mutex lock. The lock is needed only to manage the linked list, and it's not necessarily to cover the whole initialization process. Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-09-08ALSA: timer: Fix zero-division by continue of uninitialized instanceTakashi Iwai1-0/+14
When a user timer instance is continued without the explicit start beforehand, the system gets eventually zero-division error like: divide error: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN CPU: 1 PID: 27320 Comm: syz-executor Not tainted 4.8.0-rc3-next-20160825+ #8 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 task: ffff88003c9b2280 task.stack: ffff880027280000 RIP: 0010:[<ffffffff858e1a6c>] [< inline >] ktime_divns include/linux/ktime.h:195 RIP: 0010:[<ffffffff858e1a6c>] [<ffffffff858e1a6c>] snd_hrtimer_callback+0x1bc/0x3c0 sound/core/hrtimer.c:62 Call Trace: <IRQ> [< inline >] __run_hrtimer kernel/time/hrtimer.c:1238 [<ffffffff81504335>] __hrtimer_run_queues+0x325/0xe70 kernel/time/hrtimer.c:1302 [<ffffffff81506ceb>] hrtimer_interrupt+0x18b/0x420 kernel/time/hrtimer.c:1336 [<ffffffff8126d8df>] local_apic_timer_interrupt+0x6f/0xe0 arch/x86/kernel/apic/apic.c:933 [<ffffffff86e13056>] smp_apic_timer_interrupt+0x76/0xa0 arch/x86/kernel/apic/apic.c:957 [<ffffffff86e1210c>] apic_timer_interrupt+0x8c/0xa0 arch/x86/entry/entry_64.S:487 <EOI> ..... Although a similar issue was spotted and a fix patch was merged in commit [6b760bb2c63a: ALSA: timer: fix division by zero after SNDRV_TIMER_IOCTL_CONTINUE], it seems covering only a part of iceberg. In this patch, we fix the issue a bit more drastically. Basically the continue of an uninitialized timer is supposed to be a fresh start, so we do it for user timers. For the direct snd_timer_continue() call, there is no way to pass the initial tick value, so we kick out for the uninitialized case. Reported-by: Dmitry Vyukov <dvyukov@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-09-08dmi-id: don't free dev structure after calling device_registerAllen Hung1-4/+4
dmi_dev is freed in error exit code but, according to the document of device_register, it should never directly free device structure after calling this function, even if it returned an error! Use put_device() instead. Signed-off-by: Allen Hung <allen_hung@dell.com> Signed-off-by: Jean Delvare <jdelvare@suse.de>
2016-09-08xhci: fix null pointer dereference in stop command timeout functionMathias Nyman1-1/+5
The stop endpoint command has its own 5 second timeout timer. If the timeout function is triggered between USB3 and USB2 host removal it will try to call usb_hc_died(xhci_to_hcd(xhci)->primary_hcd) the ->primary_hcd will be set to NULL at USB3 hcd removal. Fix this by first checking if the PCI host is being removed, and also by using only xhci_to_hcd() as it will always return the primary hcd. CC: <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-07Merge branch 'for-rc' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal fix from Zhang Rui: "Only one patch this time, which fixes a crash in rcar_thermal driver. From Dirk Behme" * 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: thermal: rcar_thermal: Fix priv->zone error handling
2016-09-07Merge tag 'sunxi-fixes-for-4.8' of ↵Olof Johansson1-1/+1
https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into fixes Allwinner fixes for 4.8 A single patch fixing a typo in the temperature trip points in the A13 DTSI. * tag 'sunxi-fixes-for-4.8' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: ARM: sun5i: Fix typo in trip point temperature Signed-off-by: Olof Johansson <olof@lixom.net>
2016-09-07arm-cci: pmu: Fix typo in event nameSuzuki K Poulose1-1/+1
For one of the CCI events exposed under sysfs, "snoop" was typo'd as "snopp". Correct this such that users see the expected event name when enumerating events via sysfs. Cc: arm@kernel.org Acked-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-09-07Merge tag 'imx-fixes-4.8-2' of ↵Olof Johansson3-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes i.MX fixes for 4.8, 2nd round: - Fix misspelled "ti,x-plate-ohms" property name of touchscreen controller for imx7d-sdb DTS. - Add missing BM_CLPCR_BYPASS_PMIC_READY setting for i.MX6SX to get suspend/resume work properly. - Fix SPDIF regression on imx6qdl which caused by a clock update on spdif device node. * tag 'imx-fixes-4.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx6qdl: Fix SPDIF regression ARM: imx6: add missing BM_CLPCR_BYPASS_PMIC_READY setting for imx6sx ARM: dts: imx7d-sdb: fix ti,x-plate-ohms property name Signed-off-by: Olof Johansson <olof@lixom.net>
2016-09-07Revert "ARM: tegra: fix erroneous address in dts"Olof Johansson1-2/+2
This reverts commit b5c86b7496d74f6e454bcab5166efa023e1f0459. This is no longer needed due to other changes going into 4.8 to rename the unit addresses on a large number of device nodes. So it was picked up for v4.8-rc1 in error. Reported-by: Ralf Ramsauer <ralf@ramses-pyramidenbau.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2016-09-08powerpc/mm: Don't alias user region to other regions below PAGE_OFFSETPaul Mackerras1-1/+6
In commit c60ac5693c47 ("powerpc: Update kernel VSID range", 2013-03-13) we lost a check on the region number (the top four bits of the effective address) for addresses below PAGE_OFFSET. That commit replaced a check that the top 18 bits were all zero with a check that bits 46 - 59 were zero (performed for all addresses, not just user addresses). This means that userspace can access an address like 0x1000_0xxx_xxxx_xxxx and we will insert a valid SLB entry for it. The VSID used will be the same as if the top 4 bits were 0, but the page size will be some random value obtained by indexing beyond the end of the mm_ctx_high_slices_psize array in the paca. If that page size is the same as would be used for region 0, then userspace just has an alias of the region 0 space. If the page size is different, then no HPTE will be found for the access, and the process will get a SIGSEGV (since hash_page_mm() will refuse to create a HPTE for the bogus address). The access beyond the end of the mm_ctx_high_slices_psize can be at most 5.5MB past the array, and so will be in RAM somewhere. Since the access is a load performed in real mode, it won't fault or crash the kernel. At most this bug could perhaps leak a little bit of information about blocks of 32 bytes of memory located at offsets of i * 512kB past the paca->mm_ctx_high_slices_psize array, for 1 <= i <= 11. Fixes: c60ac5693c47 ("powerpc: Update kernel VSID range") Cc: stable@vger.kernel.org # v3.9+ Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-09-08powerpc/32: Fix again csum_partial_copy_generic()Christophe Leroy1-3/+4
Commit 7aef4136566b0 ("powerpc32: rewrite csum_partial_copy_generic() based on copy_tofrom_user()") introduced a bug when destination address is odd and len is lower than cacheline size. In that case the resulting csum value doesn't have to be rotated one byte because the cache-aligned copy part is skipped so no alignment is performed. Fixes: 7aef4136566b0 ("powerpc32: rewrite csum_partial_copy_generic() based on copy_tofrom_user()") Cc: stable@vger.kernel.org # v4.6+ Reported-by: Alessio Igor Bogani <alessio.bogani@elettra.eu> Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Tested-by: Alessio Igor Bogani <alessio.bogani@elettra.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-09-08powerpc/powernv: Fix corrupted PE allocation bitmap on releasing PEGavin Shan1-1/+2
In pnv_ioda_free_pe(), the PE object (including the associated PE number) is cleared before resetting the corresponding bit in the PE allocation bitmap. It means PE#0 is always released to the bitmap wrongly. This fixes above issue by caching the PE number before the PE object is cleared. Fixes: 1e9167726c41 ("powerpc/powernv: Use PE instead of number during setup and release" Cc: stable@vger.kernel.org # v4.7+ Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-09-08gpio: sa1100: fix irq probing for ucb1x00Russell King1-1/+1
ucb1x00 has used IRQ probing since it's dawn to find the GPIO interrupt that it's connected to. However, commit 23393d49fb75 ("gpio: kill off set_irq_flags usage") broke this by disabling IRQ probing on GPIO interrupts. Fix this. Fixes: 23393d49fb75 ("gpio: kill off set_irq_flags usage") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-08gpio: mcp23s08: make driver depend on OF_GPIOLinus Walleij2-1/+2
The MCP23S08 driver certainly accesses fields inside the struct gpio_chip that are only available under CONFIG_OF_GPIO not just CONFIG_OF, so update the Kconfig and driver to reflect this. Cc: Alexander Stein <alexander.stein@systec-electronic.com> Cc: Phil Reid <preid@electromag.com.au> Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-08Revert "gpio: include <linux/io-mapping.h> in gpiolib-of"Linus Walleij1-1/+0
This reverts commit 7d4defe21c682c934a19fce1ba8b54b7bde61b08. The commit was pointless, manically trembling in the dark for a solution. The real fixes are: commit 048c28c91e56 ("gpio: make any OF dependent driver depend on OF_GPIO") commit 2527ecc9195e ("gpio: Fix OF build problem on UM") Reported-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-07Merge tag 'usercopy-v4.8-rc6-part2' of ↵Linus Torvalds3-28/+48
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull more hardened usercopyfixes from Kees Cook: - force check_object_size() to be inline too - move page-spanning check behind a CONFIG since it's triggering false positives [ Changed the page-spanning config option to depend on EXPERT in the merge. That way it still gets build testing, and you can enable it if you want to, but is never enabled for "normal" configurations ] * tag 'usercopy-v4.8-rc6-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: usercopy: remove page-spanning test for now usercopy: force check_object_size() inline
2016-09-07Merge branch 'for-chris' of ↵Chris Mason2-8/+16
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux into for-linus-4.8
2016-09-07usercopy: remove page-spanning test for nowKees Cook2-26/+46
A custom allocator without __GFP_COMP that copies to userspace has been found in vmw_execbuf_process[1], so this disables the page-span checker by placing it behind a CONFIG for future work where such things can be tracked down later. [1] https://bugzilla.redhat.com/show_bug.cgi?id=1373326 Reported-by: Vinson Lee <vlee@freedesktop.org> Fixes: f5509cc18daa ("mm: Hardened usercopy") Signed-off-by: Kees Cook <keescook@chromium.org>
2016-09-07usercopy: force check_object_size() inlineKees Cook1-2/+2
Just for good measure, make sure that check_object_size() is always inlined too, as already done for copy_*_user() and __copy_*_user(). Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Kees Cook <keescook@chromium.org>
2016-09-07Merge tag 'seccomp-v4.8-rc6' of ↵Linus Torvalds4-18/+10
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull seccomp fixes from Kees Cook: "Fix UM seccomp vs ptrace, after reordering landed" * tag 'seccomp-v4.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: seccomp: Remove 2-phase API documentation um/ptrace: Fix the syscall number update after a ptrace um/ptrace: Fix the syscall_trace_leave call
2016-09-07Merge tag 'usercopy-v4.8-rc6' of ↵Linus Torvalds7-41/+38
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull hardened usercopy fixes from Kees Cook: - inline copy_*_user() for correct use of __builtin_const_p() for hardened usercopy and the recent compile-time checks. - switch hardened usercopy to only check non-const size arguments to avoid meaningless checks on likely-sane const values. - update lkdtm usercopy tests to compenstate for the const checking. * tag 'usercopy-v4.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: lkdtm: adjust usercopy tests to bypass const checks usercopy: fold builtin_const check into inline function x86/uaccess: force copy_*_user() to be inlined
2016-09-07seccomp: Remove 2-phase API documentationMickaël Salaün1-11/+0
Fixes: 8112c4f140fa ("seccomp: remove 2-phase API") Signed-off-by: Mickaël Salaün <mic@digikod.net> Acked-by: Kees Cook <keescook@chromium.org> Cc: Andy Lutomirski <luto@kernel.org> Cc: James Morris <jmorris@namei.org> Signed-off-by: James Morris <james.l.morris@oracle.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2016-09-07um/ptrace: Fix the syscall number update after a ptraceMickaël Salaün3-5/+7
Update the syscall number after each PTRACE_SETREGS on ORIG_*AX. This is needed to get the potentially altered syscall number in the seccomp filters after RET_TRACE. This fix four seccomp_bpf tests: > [ RUN ] TRACE_syscall.skip_after_RET_TRACE > seccomp_bpf.c:1560:TRACE_syscall.skip_after_RET_TRACE:Expected -1 (18446744073709551615) == syscall(39) (26) > seccomp_bpf.c:1561:TRACE_syscall.skip_after_RET_TRACE:Expected 1 (1) == (*__errno_location ()) (22) > [ FAIL ] TRACE_syscall.skip_after_RET_TRACE > [ RUN ] TRACE_syscall.kill_after_RET_TRACE > TRACE_syscall.kill_after_RET_TRACE: Test exited normally instead of by signal (code: 1) > [ FAIL ] TRACE_syscall.kill_after_RET_TRACE > [ RUN ] TRACE_syscall.skip_after_ptrace > seccomp_bpf.c:1622:TRACE_syscall.skip_after_ptrace:Expected -1 (18446744073709551615) == syscall(39) (26) > seccomp_bpf.c:1623:TRACE_syscall.skip_after_ptrace:Expected 1 (1) == (*__errno_location ()) (22) > [ FAIL ] TRACE_syscall.skip_after_ptrace > [ RUN ] TRACE_syscall.kill_after_ptrace > TRACE_syscall.kill_after_ptrace: Test exited normally instead of by signal (code: 1) > [ FAIL ] TRACE_syscall.kill_after_ptrace Fixes: 26703c636c1f ("um/ptrace: run seccomp after ptrace") Signed-off-by: Mickaël Salaün <mic@digikod.net> Acked-by: Kees Cook <keescook@chromium.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: James Morris <jmorris@namei.org> Cc: user-mode-linux-devel@lists.sourceforge.net Signed-off-by: James Morris <james.l.morris@oracle.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2016-09-07um/ptrace: Fix the syscall_trace_leave callMickaël Salaün1-2/+3
Keep the same semantic as before the commit 26703c636c1f: deallocate audit context and fake a proper syscall exit. This fix a kernel panic triggered by the seccomp_bpf test: > [ RUN ] global.ERRNO_valid > BUG: failure at kernel/auditsc.c:1504/__audit_syscall_entry()! > Kernel panic - not syncing: BUG! Fixes: 26703c636c1f ("um/ptrace: run seccomp after ptrace") Signed-off-by: Mickaël Salaün <mic@digikod.net> Acked-by: Kees Cook <keescook@chromium.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: James Morris <jmorris@namei.org> Cc: user-mode-linux-devel@lists.sourceforge.net Signed-off-by: James Morris <james.l.morris@oracle.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2016-09-07usb: dwc3: pci: fix build warning on !PM_SLEEPFelipe Balbi1-1/+3
When building a kernel with CONFIG_PM_SLEEP=n, we get the following warning: drivers/usb/dwc3/dwc3-pci.c:253:12: warning: 'dwc3_pci_pm_dummy' defined but not used In order to fix this, we should only define dwc3_pci_pm_dummy() when CONFIG_PM_SLEEP is defined. Fixes: f6c274e11e3b ("usb: dwc3: pci: runtime_resume child device") Reported-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-09-06Merge tag 'for-linus' of ↵Linus Torvalds23-177/+226
git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma Pull rdma fixes from Doug Ledford: "This is the second pull request for the rdma subsystem. Most of the patches are small and obvious. I took two patches in that are larger than I wanted this late in the cycle. The first is the hfi1 patch that implements a work queue to test the QSFP read state. I originally rejected the first patch for this (which would have place up to 20 seconds worth of udelays in their probe routine). They then rewrote it the way I wanted (use delayed work tasks to wait asynchronously up to 20 seconds for the QSFP to come alive), so I can't really complain about the size of getting what I asked for :-/. The second is large because it switches the rcu locking in the debugfs code. Since a locking change like this is done all at once, the size it what it is. It resolves a litany of debug messages from the kernel, so I pulled it in for -rc. The rest are all typical -rc worthy patches I think. There will still be a third -rc pull request from the rdma subsystem this release. I hope to have that one ready to go by the end of this week or early next. Summary: - a smattering of small fixes across the core, ipoib, i40iw, isert, cxgb4, and mlx4 - a slightly larger group of fixes to each of mlx5 and hfi1" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: IB/hfi1: Rework debugfs to use SRCU IB/hfi1: Make n_krcvqs be an unsigned long integer IB/hfi1: Add QSFP sanity pre-check IB/hfi1: Fix AHG KDETH Intr shift IB/hfi1: Fix SGE length for misaligned PIO copy IB/mlx5: Don't return errors from poll_cq IB/mlx5: Use TIR number based on selector IB/mlx5: Simplify code by removing return variable IB/mlx5: Return EINVAL when caller specifies too many SGEs IB/mlx4: Don't return errors from poll_cq Revert "IB/mlx4: Return EAGAIN for any error in mlx4_ib_poll_one" IB/ipoib: Fix memory corruption in ipoib cm mode connect flow IB/core: Fix use after free in send_leave function IB/cxgb4: Make _free_qp static to silence build warning IB/isert: Properly release resources on DEVICE_REMOVAL IB/hfi1: Fix the size parameter to find_first_bit IB/mlx5: Fix the size parameter to find_first_bit IB/hfi1: Clean up type used and casting i40iw: Receive notification events correctly i40iw: Update hw_iwarp_state
2016-09-06lkdtm: adjust usercopy tests to bypass const checksKees Cook1-8/+17
The hardened usercopy is now consistently avoiding checks against const sizes, since we really only want to perform runtime bounds checking on lengths that weren't known at build time. To test the hardened usercopy code, we must force the length arguments to be seen as non-const. Signed-off-by: Kees Cook <keescook@chromium.org>
2016-09-06usercopy: fold builtin_const check into inline functionKees Cook5-31/+19
Instead of having each caller of check_object_size() need to remember to check for a const size parameter, move the check into check_object_size() itself. This actually matches the original implementation in PaX, though this commit cleans up the now-redundant builtin_const() calls in the various architectures. Signed-off-by: Kees Cook <keescook@chromium.org>
2016-09-06x86/uaccess: force copy_*_user() to be inlinedKees Cook1-2/+2
As already done with __copy_*_user(), mark copy_*_user() as __always_inline. Without this, the checks for things like __builtin_const_p() won't work consistently in either hardened usercopy nor the recent adjustments for detecting usercopy overflows at compile time. The change in kernel text size is detectable, but very small: text data bss dec hex filename 12118735 5768608 14229504 32116847 1ea106f vmlinux.before 12120207 5768608 14229504 32118319 1ea162f vmlinux.after Signed-off-by: Kees Cook <keescook@chromium.org>
2016-09-06Merge branch 'mailbox-devel' of ↵Linus Torvalds2-5/+7
git://git.linaro.org/landing-teams/working/fujitsu/integration Pull mailbox fixes from Jassi Brar: "Misc fixes for BCM mailbox driver - Fix build warnings by making static functions used within the file. - Check for potential NULL before dereferencing - Fix link error by defining HAS_DMA dependency" * 'mailbox-devel' of git://git.linaro.org/landing-teams/working/fujitsu/integration: fix:mailbox:bcm-pdc-mailbox:mark symbols static where possible mailbox: bcm-pdc: potential NULL dereference in pdc_shutdown() mailbox: Add HAS_DMA Kconfig dependency to BCM_PDC_MBOX
2016-09-06Merge tag 'scsi-fixes' of ↵Linus Torvalds5-22/+10
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is really three fixes, but the SES one comes in a bundle of three (making the replacement API available properly, using it and removing the non-working one). The SES problem causes an oops on hpsa devices because they attach virtual disks to the host which aren't SAS attached (the replacement API ignores them). The other two fixes are fairly minor: the sense key one means we actually resolve a newly added sense key and the RDAC device blacklisting is needed to prevent us annoying the universal XPORT lun of various RDAC arrays" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: sas: remove is_sas_attached() scsi: ses: use scsi_is_sas_rphy instead of is_sas_attached scsi: sas: provide stub implementation for scsi_is_sas_rphy scsi: blacklist all RDAC devices for BLIST_NO_ULD_ATTACH scsi: fix upper bounds check of sense key in scsi_sense_key_string()
2016-09-06Merge tag 'regmap-fix-v4.8-rc5' of ↵Linus Torvalds3-12/+33
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap fixes from Mark Brown: "Several fixes here, the main one being the change from Lars-Peter which I'd been letting soak in -next since the merge window in case it uncovered further issues as it's a minimal fix rather than a change addressing the root cause of the problems (which would've been too invasive for -rc): - The biggest change is a fix from Lars-Peter to ensure that we don't create overlapping rbtree nodes which in turn avoids returning corrupt cache values to users, fixing some issues that were exposed by some recent optimisations with certain access patterns but had been present for a long time. - A fix from Elaine Zhang to stop us updating the cache if we get an I/O error when writing to the hardware. - A fix fromm Maarten ter Huurne to avoid uninitialized defaults in cases where we have non-readable registers but are initializing the cache by reading from the device" * tag 'regmap-fix-v4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: drop cache if the bus transfer error regmap: rbtree: Avoid overlapping nodes regmap: cache: Fix num_reg_defaults computation from reg_defaults_raw
2016-09-06Merge tag 'spi-fix-v4.8-rc5' of ↵Linus Torvalds7-7/+23
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "As well as the usual driver fixes there's a couple of non-trivial core fixes in here: - Fixes for issues reported by Julia Lawall in the changes that were sent last time to fix interaction between the bus lock and the locking done for the SPI thread. I'd let this one cook for a while to make sure nothing else came up in testing. - A fix from Sien Wu for arithmetic overflows when calculating the timeout for larger transfers (espcially common with slow buses with flashes on them)" * tag 'spi-fix-v4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: Prevent unexpected SPI time out due to arithmetic overflow spi: pxa2xx-pci: fix ACPI-based enumeration of SPI devices MAINTAINERS: add myself as Samsung SPI maintainer spi: Drop io_mutex in error paths spi: sh-msiof: Avoid invalid clock generator parameters spi: img-spfi: Remove spi_master_put in img_spfi_remove() spi: mediatek: remove spi_master_put in mtk_spi_remove() spi: qup: Remove spi_master_put in spi_qup_remove()
2016-09-06Merge tag 'regulator-fix-v4.8-rc5' of ↵Linus Torvalds3-18/+20
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "Two things here, one an e-mail update for Krzysztof Kozlowski and the other a couple of fixes for issues with incorrectly described voltages in a couple of the Qualcomm regulator drivers that were breaking MMC on some platforms" * tag 'regulator-fix-v4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: Change Krzysztof Kozlowski's email to kernel.org regulator: qcom_smd: Fix voltage ranges for pma8084 ftsmps and pldo regulator: qcom_smd: Fix voltage ranges for pm8x41
2016-09-06Merge tag 'pinctrl-v4.8-3' of ↵Linus Torvalds4-13/+12
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: "Nothing special at all, just three SoC-specific driver fixes: - Fix routing problems in pistachio (Imagination) and sunxi (AllWinner) - Fix an interrupt problem in the Cherryview (Intel)" * tag 'pinctrl-v4.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: sunxi: fix uart1 CTS/RTS pins at PG on A23/A33 pinctrl: cherryview: Do not mask all interrupts in probe pinctrl: pistachio: fix mfio pll_lock pinmux
2016-09-06btrfs: introduce tickets_id to determine whether asynchronous metadata ↵Wang Xiaoguang2-5/+7
reclaim work makes progress In btrfs_async_reclaim_metadata_space(), we use ticket's address to determine whether asynchronous metadata reclaim work is making progress. ticket = list_first_entry(&space_info->tickets, struct reserve_ticket, list); if (last_ticket == ticket) { flush_state++; } else { last_ticket = ticket; flush_state = FLUSH_DELAYED_ITEMS_NR; if (commit_cycles) commit_cycles--; } But indeed it's wrong, we should not rely on local variable's address to do this check, because addresses may be same. In my test environment, I dd one 168MB file in a 256MB fs, found that for this file, every time wait_reserve_ticket() called, local variable ticket's address is same, For above codes, assume a previous ticket's address is addrA, last_ticket is addrA. Btrfs_async_reclaim_metadata_space() finished this ticket and wake up it, then another ticket is added, but with the same address addrA, now last_ticket will be same to current ticket, then current ticket's flush work will start from current flush_state, not initial FLUSH_DELAYED_ITEMS_NR, which may result in some enospc issues(I have seen this in my test machine). Signed-off-by: Wang Xiaoguang <wangxg.fnst@cn.fujitsu.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David Sterba <dsterba@suse.com>
2016-09-06Btrfs: remove root_log_ctx from ctx list before btrfs_sync_log returnsChris Mason1-0/+1
We use a btrfs_log_ctx structure to pass information into the tree log commit, and get error values out. It gets added to a per log-transaction list which we walk when things go bad. Commit d1433debe added an optimization to skip waiting for the log commit, but didn't take root_log_ctx out of the list. This patch makes sure we remove things before exiting. Signed-off-by: Chris Mason <clm@fb.com> Fixes: d1433debe7f4346cf9fc0dafc71c3137d2a97bc4 cc: stable@vger.kernel.org # 3.15+
2016-09-06thermal: rcar_thermal: Fix priv->zone error handlingDirk Behme1-0/+1
In case thermal_zone_xxx_register() returns an error, priv->zone isn't NULL any more, but contains the error code. This is passed to thermal_zone_device_unregister(), then. This checks for priv->zone being NULL, but the error code is != NULL. So it works with the error code as a pointer. Crashing immediately. To fix this, reset priv->zone to NULL before entering rcar_gen3_thermal_remove(). Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-06Merge remote-tracking branches 'spi/fix/lock', 'spi/fix/maintainers', ↵Mark Brown7-7/+23
'spi/fix/put', 'spi/fix/pxa2xx', 'spi/fix/sh-msiof' and 'spi/fix/timeout' into spi-linus
2016-09-06Merge remote-tracking branches 'regulator/fix/email' and ↵Mark Brown3-18/+20
'regulator/fix/qcom-smd' into regulator-linus
2016-09-06usb: gadget: prevent potenial null pointer dereference on skb->lenColin Ian King1-1/+1
An earlier fix partially fixed the null pointer dereference on skb->len by moving the assignment of len after the check on skb being non-null, however it failed to remove the erroneous dereference when assigning len. Correctly fix this by removing the initialisation of len as was originally intended. Fixes: 70237dc8efd092 ("usb: gadget: function: f_eem: socket buffer may be NULL") Acked-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-09-06powerpc/powernv: Fix crash on releasing compound PEGavin Shan1-6/+9
The compound PE is created to accommodate the devices attached to one specific PCI bus that consume multiple M64 segments. The compound PE is made up of one master PE and possibly multiple slave PEs. The slave PEs should be destroyed when releasing the master PE. A kernel crash happens when derferencing @pe->pdev on releasing the slave PE in pnv_ioda_deconfigure_pe(). # echo 0 > /sys/bus/pci/slots/C7/power iommu: Removing device 0000:01:00.1 from group 0 iommu: Removing device 0000:01:00.0 from group 0 Unable to handle kernel paging request for data at address 0x00000010 Faulting instruction address: 0xc00000000005d898 cpu 0x1: Vector: 300 (Data Access) at [c000000fe8217620] pc: c00000000005d898: pnv_ioda_release_pe+0x288/0x610 lr: c00000000005dbdc: pnv_ioda_release_pe+0x5cc/0x610 sp: c000000fe82178a0 msr: 9000000000009033 dar: 10 dsisr: 40000000 current = 0xc000000fe815ab80 paca = 0xc00000000ff00400 softe: 0 irq_happened: 0x01 pid = 2709, comm = sh Linux version 4.8.0-rc5-gavin-00006-g745efdb (gwshan@gwshan) \ (gcc version 4.9.3 (Buildroot 2016.02-rc2-00093-g5ea3bce) ) #586 SMP \ Tue Sep 6 13:37:29 AEST 2016 enter ? for help [c000000fe8217940] c00000000005d684 pnv_ioda_release_pe+0x74/0x610 [c000000fe82179e0] c000000000034460 pcibios_release_device+0x50/0x70 [c000000fe8217a10] c0000000004aba80 pci_release_dev+0x50/0xa0 [c000000fe8217a40] c000000000704898 device_release+0x58/0xf0 [c000000fe8217ac0] c000000000470510 kobject_release+0x80/0xf0 [c000000fe8217b00] c000000000704dd4 put_device+0x24/0x40 [c000000fe8217b20] c0000000004af94c pci_remove_bus_device+0x12c/0x150 [c000000fe8217b60] c000000000034244 pci_hp_remove_devices+0x94/0xd0 [c000000fe8217ba0] c0000000004ca444 pnv_php_disable_slot+0x64/0xb0 [c000000fe8217bd0] c0000000004c88c0 power_write_file+0xa0/0x190 [c000000fe8217c50] c0000000004c248c pci_slot_attr_store+0x3c/0x60 [c000000fe8217c70] c0000000002d6494 sysfs_kf_write+0x94/0xc0 [c000000fe8217cb0] c0000000002d50f0 kernfs_fop_write+0x180/0x260 [c000000fe8217d00] c0000000002334a0 __vfs_write+0x40/0x190 [c000000fe8217d90] c000000000234738 vfs_write+0xc8/0x240 [c000000fe8217de0] c000000000236250 SyS_write+0x60/0x110 [c000000fe8217e30] c000000000009524 system_call+0x38/0x108 It fixes the kernel crash by bypassing releasing resources (DMA, IO and memory segments, PELTM) because there are no resources assigned to the slave PE. Fixes: c5f7700bbd2e ("powerpc/powernv: Dynamically release PE") Reported-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-09-06powerpc/xics/opal: Fix processor numbers in OPAL ICPBenjamin Herrenschmidt1-5/+7
When using the OPAL ICP backend we incorrectly pass Linux CPU numbers rather than HW CPU numbers to OPAL. Fixes: d74361881f0d ("powerpc/xics: Add ICP OPAL backend") Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-09-06powerpc/pseries: Fix little endian build with CONFIG_KEXEC=nThiago Jung Bauermann1-1/+1
On ppc64le, builds with CONFIG_KEXEC=n fail with: arch/powerpc/platforms/pseries/setup.c: In function ‘pseries_big_endian_exceptions’: arch/powerpc/platforms/pseries/setup.c:403:13: error: implicit declaration of function ‘kdump_in_progress’ if (rc && !kdump_in_progress()) This is because pseries/setup.c includes <linux/kexec.h>, but kdump_in_progress() is defined in <asm/kexec.h>. This is a problem because the former only includes the latter if CONFIG_KEXEC_CORE=y. Fix it by including <asm/kexec.h> directly, as is done in powernv/setup.c. Fixes: d3cbff1b5a90 ("powerpc: Put exception configuration in a common place") Signed-off-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-09-05iio:core: fix IIO_VAL_FRACTIONAL sign handlingGregor Boirie1-3/+2
7985e7c100 ("iio: Introduce a new fractional value type") introduced a new IIO_VAL_FRACTIONAL value type meant to represent rational type numbers expressed by a numerator and denominator combination. Formating of IIO_VAL_FRACTIONAL values relies upon do_div() usage. This fails handling negative values properly since parameters are reevaluated as unsigned values. Fix this by using div_s64_rem() instead. Computed integer part will carry properly signed value. Formatted fractional part will always be positive. Fixes: 7985e7c100 ("iio: Introduce a new fractional value type") Signed-off-by: Gregor Boirie <gregor.boirie@parrot.com> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-09-05iio: ensure ret is initialized to zero before entering do loopColin Ian King1-2/+2
A recent fix to iio_buffer_read_first_n_outer removed ret from being set by a return from wait_event_interruptible and also added a continue in a loop which causes the variable ret to not be set when it reaches the end of the loop. Fix this by initializing ret to zero. Also remove extraneous white space at the end of the loop. Fixes: fcf68f3c0bb2a5 ("fix sched WARNING "do not call blocking ops when !TASK_RUNNING") Signed-off-by: Colin Ian King <colin.king@canonical.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
generated by cgit v1.2.3 (git 2.39.1) at 2025-02-18 19:15:38 +0000