summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2021-06-15mfd: wm831x: Use DEVICE_ATTR_RO macroZhen Lei1-3/+3
Use DEVICE_ATTR_RO macro helper instead of plain DEVICE_ATTR, which makes the code a bit shorter and easier to read. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-15mfd: wm831x: Use DEFINE_RES_IRQ_NAMED() and DEFINE_RES_IRQ() to simplify codeZhen Lei1-212/+36
No functional change. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02dt-bindings: mfd: stm32-timers: Remove #address/size cells from required ↵Alexandre Torgue1-2/+0
properties address-cells and size-cells can't be declared as "required" properties as they are not needed if subnodes don't have a "reg" entry. Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: sun6i-prcm: Use DEFINE_RES_MEM() to simplify codeZhen Lei1-25/+5
No functional change. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: asic3: Use DEFINE_RES_MEM() and DEFINE_RES_IRQ() to simplify codeZhen Lei1-10/+2
No functional change. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: 88pm805: Use DEFINE_RES_IRQ_NAMED() to simplify codeZhen Lei1-21/+8
No functional change. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: 88pm800: Use DEFINE_RES_IRQ_NAMED() to simplify codeZhen Lei1-12/+2
No functional change. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: tps80031: Use DEFINE_RES_IRQ() to simplify codeZhen Lei1-5/+1
No functional change. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: da9055: Use DEFINE_RES_IRQ_NAMED() to simplify codeZhen Lei1-30/+8
No functional change. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: as3722: Use DEFINE_RES_IRQ_NAMED() to simplify codeZhen Lei1-12/+2
No functional change. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: t7l66xb: Use DEFINE_RES_MEM() and DEFINE_RES_IRQ() to simplify codeZhen Lei1-10/+2
No functional change. Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: cros_ec_dev: Load lightbar module only presentGwendal Grignou1-1/+19
The pixel lightbar is only present on chromebook pixel (link), pixel 2 and pixel C. For the latter two, the EC reports its presence. Instead of always loading the lightbar driver on all chromebook, only load it when reported by the EC or Link device. Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: sec: Remove unused platform data membersKrzysztof Kozlowski1-25/+0
The Samsung PMIC drivers for early chipsets like S5M8767 stored quite a lot in platform data (struct sec_platform_data). The s5m8767 regulator driver currently references only some of its fields. Newer regulator drivers (e.g. s2mps11) use even less platform data fields. Clean up the structure to reduce memory footprint and source code size. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: sec: Enable wakeup from suspend via devicetree propertyKrzysztof Kozlowski2-11/+0
Set device wakeup capability from devicetree property (done by drivers core), instead of always setting it to 0 (because value in platform data is not assigned). This should not have visible effect on actual resuming from suspend because the child device - S5M RTC driver - is responsible for waking up and sets device wakeup unconditionally. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: sec: Remove unused irq_base in platform dataKrzysztof Kozlowski3-7/+1
The 'irq_base' field of platform data structure is not assigned, therefore its default value of 0 has no impact and can be safely dropped. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: sec: Remove unused device_type in platform dataKrzysztof Kozlowski2-5/+1
The 'device_type' field of platform data structure is not used and can be safely dropped. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: sec: Remove unused cfg_pmic_irq in platform dataKrzysztof Kozlowski2-4/+0
The 'cfg_pmic_irq' field of platform data structure is not used and can be safely dropped. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: sec: Drop support for board files and require devicetreeKrzysztof Kozlowski2-44/+16
The Samsung PMIC drivers since long time are used only on devicetree platforms (Samsung Exynos) and there are no users with board files. Drop the support for board files entirely and depend on OF for matching. Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: sec: Simplify getting of_device_id match dataKrzysztof Kozlowski1-7/+3
Use of_device_get_match_data() to make the code slightly smaller. There is also no need to wrap it in a check for CONFIG_OF, because dev.of_node will be set only with OF support. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: da9062: Simplify getting of_device_id match dataKrzysztof Kozlowski1-9/+4
Use of_device_get_match_data() to make the code slightly smaller. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: da9052: Simplify getting of_device_id match dataKrzysztof Kozlowski1-7/+2
Use of_device_get_match_data() to make the code slightly smaller. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Acked-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: max8998: Simplify getting of_device_id match dataKrzysztof Kozlowski1-5/+3
Use of_device_get_match_data() to make the code slightly smaller. There is also no need to wrap it in a check for CONFIG_OF, because dev.of_node will be set only with OF support. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: max8997: Simplify getting of_device_id match dataKrzysztof Kozlowski1-5/+4
Use of_device_get_match_data() to make the code slightly smaller. There is also no need to wrap it in a check for CONFIG_OF, because dev.of_node will be set only with OF support. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: qcom-spmi-pmic: Add support for four variantssatya priya1-0/+4
Add support for pm8350c, pmk8350, pm7325 and pmr735a PMICS. Signed-off-by: satya priya <skakit@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: pm8008: Add driver for QCOM PM8008 PMICGuru Das Srinagesh3-0/+275
Qualcomm Technologies, Inc. PM8008 is a dedicated camera PMIC that integrates all the necessary power management, housekeeping, and interface support functions into a single IC. Its key features include overtemperature protection, low-dropout linear regulators, GPIOs, and an I2C interface. Add an MFD driver to support it. Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02dt-bindings: mfd: pm8008: Add bindingsGuru Das Srinagesh1-0/+121
Add bindings for the Qualcomm Technologies, Inc. PM8008 MFD driver. Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02dt-bindings: mfd: pm8008: Add IRQ listingGuru Das Srinagesh1-0/+19
Add a header file listing all of the IRQs that Qualcomm Technologies, Inc. PM8008 supports. The constants defined in this file may be used in the client device tree node to specify interrupts. Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: da9063: Propagate errno when I2C mode failsWolfram Sang1-1/+1
Don't hardocde EIO but use the obtained value. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Mark Jonas <mark.jonas@de.bosch.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: bd71828: Fix .n_voltages settingsAxel Lin1-5/+5
Current .n_voltages settings do not cover the latest 2 valid selectors, so it fails to set voltage for the hightest voltage support. The latest linear range has step_uV = 0, so it does not matter if we count the .n_voltages to maximum selector + 1 or the first selector of latest linear range + 1. To simplify calculating the n_voltages, let's just set the .n_voltages to maximum selector + 1. Fixes: 522498f8cb8c ("regulator: bd71828: Basic support for ROHM bd71828 PMIC regulators") Signed-off-by: Axel Lin <axel.lin@ingics.com> Reviewed-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: hisilicon: Use the correct HiSilicon copyrightHao Fang2-2/+2
s/Hisilicon/HiSilicon/ It should use capital S, according to the official website https://www.hisilicon.com/en. Signed-off-by: Hao Fang <fanghao11@huawei.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: cpcap: Fix cpcap dmamask not set warningsTony Lindgren1-0/+4
We have started to get a bunch of pointless dmamask not set warnings that makes the output of dmesg -l err,warn hard to read with many extra warnings: cpcap-regulator cpcap-regulator.0: DMA mask not set cpcap_adc cpcap_adc.0: DMA mask not set cpcap_battery cpcap_battery.0: DMA mask not set cpcap-charger cpcap-charger.0: DMA mask not set cpcap-pwrbutton cpcap-pwrbutton.0: DMA mask not set cpcap-led cpcap-led.0: DMA mask not set cpcap-led cpcap-led.1: DMA mask not set cpcap-led cpcap-led.2: DMA mask not set cpcap-led cpcap-led.3: DMA mask not set cpcap-led cpcap-led.4: DMA mask not set cpcap-rtc cpcap-rtc.0: DMA mask not set cpcap-usb-phy cpcap-usb-phy.0: DMA mask not set This seems to have started with commit 4d8bde883bfb ("OF: Don't set default coherent DMA mask"). We have the parent SPI controller use DMA, while CPCAP driver and it's children do not. For audio, the DMA is handled over I2S bus with the McBSP driver. Cc: Carl Philipp Klemm <philipp@uvos.xyz> Cc: Ivan Jelincic <parazyd@dyne.org> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Cc: Sicelo A. Mhlongo <absicsz@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: arizona: Allow building arizona MFD-core as moduleHans de Goede4-13/+15
There is no reason why the arizona core,irq and codec model specific regmap bits cannot be build as a module. All they do is export symbols which are used by the arizona-spi/i2c and arizona-codec modules, which themselves can be built as module. Change the Kconfig and Makefile arizona bits so that the arizona MFD-core can be built as a module. This is especially useful on x86 platforms with a WM5102 codec, this allows the arizona MFD driver necessary for the WM5102 codec to be enabled in generic distro-kernels without growing the base kernel-image size. Note this also adds an explicit "depends on MFD_ARIZONA" to all the arizona codec Kconfig options. The codec drivers use functions from mfd arizona-core. These new depends are necessary to disallow the codec drivers being builtin when the arizona-core is build as a module, otherwise we end up with missing symbol errors when building vmlinuz. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: db8500-prcmu: Add devicetree bindingsLinus Walleij1-0/+278
This driver was merged in the early days of device tree on Arm in 2012 and somehow we failed to provide bindings for it. Fix it up with some YAML bindings. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: si476x-i2c: Fix incorrectly documented function namesLee Jones1-5/+5
Fixes the following W=1 kernel build warning(s): drivers/mfd/si476x-i2c.c:360: warning: expecting prototype for si476x_drain_rds_fifo(). Prototype was for si476x_core_drain_rds_fifo() instead drivers/mfd/si476x-i2c.c:467: warning: expecting prototype for si476x_get_status(). Prototype was for si476x_core_get_status() instead drivers/mfd/si476x-i2c.c:484: warning: expecting prototype for si476x_get_and_signal_status(). Prototype was for si476x_core_get_and_signal_status() instead drivers/mfd/si476x-i2c.c:555: warning: expecting prototype for si476x_firmware_version_to_revision(). Prototype was for si476x_core_fwver_to_revision() instead drivers/mfd/si476x-i2c.c:619: warning: expecting prototype for si476x_get_revision_info(). Prototype was for si476x_core_get_revision_info() instead Cc: Lee Jones <lee.jones@linaro.org> Cc: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: si476x-cmd: Fix a bunch of incorrectly documented function namesLee Jones1-12/+12
Fixes the following W=1 kernel build warning(s): drivers/mfd/si476x-cmd.c:406: warning: expecting prototype for si476x_cmd_func_info(). Prototype was for si476x_core_cmd_func_info() instead drivers/mfd/si476x-cmd.c:437: warning: expecting prototype for si476x_cmd_set_property(). Prototype was for si476x_core_cmd_set_property() instead drivers/mfd/si476x-cmd.c:463: warning: expecting prototype for si476x_cmd_get_property(). Prototype was for si476x_core_cmd_get_property() instead drivers/mfd/si476x-cmd.c:525: warning: expecting prototype for si476x_cmd_dig_audio_pin_cfg(). Prototype was for si476x_core_cmd_dig_audio_pin_cfg() instead drivers/mfd/si476x-cmd.c:574: warning: expecting prototype for si476x_cmd_zif_pin_cfg(). Prototype was for si476x_core_cmd_zif_pin_cfg() instead drivers/mfd/si476x-cmd.c:631: warning: expecting prototype for si476x_cmd_ic_link_gpo_ctl_pin_cfg(). Prototype was for si476x_core_cmd_ic_link_gpo_ctl_pin_cfg() instead drivers/mfd/si476x-cmd.c:662: warning: expecting prototype for si476x_cmd_ana_audio_pin_cfg(). Prototype was for si476x_core_cmd_ana_audio_pin_cfg() instead drivers/mfd/si476x-cmd.c:697: warning: expecting prototype for si476x_cmd_intb_pin_cfg(). Prototype was for si476x_core_cmd_intb_pin_cfg_a10() instead drivers/mfd/si476x-cmd.c:742: warning: expecting prototype for si476x_cmd_am_rsq_status(). Prototype was for si476x_core_cmd_am_rsq_status() instead drivers/mfd/si476x-cmd.c:874: warning: expecting prototype for si476x_cmd_fm_seek_start(). Prototype was for si476x_core_cmd_fm_seek_start() instead drivers/mfd/si476x-cmd.c:905: warning: expecting prototype for si476x_cmd_fm_rds_status(). Prototype was for si476x_core_cmd_fm_rds_status() instead drivers/mfd/si476x-cmd.c:1050: warning: expecting prototype for si476x_cmd_am_seek_start(). Prototype was for si476x_core_cmd_am_seek_start() instead Cc: Lee Jones <lee.jones@linaro.org> Cc: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: omap-usb-tll: File headers are not good candidates for kernel-docLee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/mfd/omap-usb-tll.c:24: warning: expecting prototype for omap(). Prototype was for USBTLL_DRIVER_NAME() instead Cc: Tony Lindgren <tony@atomide.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Keshava Munegowda <keshava_mgowda@ti.com> Cc: Roger Quadros <rogerq@ti.com> Cc: linux-omap@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: omap-usb-host: File headers are not good candidates for kernel-docLee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/mfd/omap-usb-host.c:26: warning: expecting prototype for omap(). Prototype was for USBHS_DRIVER_NAME() instead Cc: Tony Lindgren <tony@atomide.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Keshava Munegowda <keshava_mgowda@ti.com> Cc: Roger Quadros <rogerq@ti.com> Cc: linux-omap@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: db8500-prcmu: Fix multiple incorrectly documented function namesLee Jones1-3/+3
Fixes the following W=1 kernel build warning(s): drivers/mfd/db8500-prcmu.c:624: warning: expecting prototype for prcmu_get_current_mode(). Prototype was for prcmu_get_xp70_current_state() instead drivers/mfd/db8500-prcmu.c:908: warning: expecting prototype for db8500_set_ape_opp(). Prototype was for db8500_prcmu_set_ape_opp() instead drivers/mfd/db8500-prcmu.c:2303: warning: expecting prototype for db8500_prcmu_reset_modem(). Prototype was for db8500_prcmu_modem_reset() instead Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Lee Jones <lee.jones@linaro.org> Cc: Kumar Sanghvi <kumar.sanghvi@stericsson.com> Cc: Sundar Iyer <sundar.iyer@stericsson.com> Cc: Mattias Nilsson <mattias.i.nilsson@stericsson.com> Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: twl-core: Fix incorrect function name twl_regcache_bypass()Lee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/mfd/twl-core.c:496: warning: expecting prototype for twl_regcache_bypass(). Prototype was for twl_set_regcache_bypass() instead Cc: Tony Lindgren <tony@atomide.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Kai Svahn <kai.svahn@nokia.com> Cc: syed khasim <x0khasim@ti.com> Cc: linux-omap@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: wm831x-core: Fix incorrect function name wm831x_reg_unlock()Lee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/mfd/wm831x-core.c:121: warning: expecting prototype for wm831x_reg_unlock(). Prototype was for wm831x_reg_lock() instead Cc: Lee Jones <lee.jones@linaro.org> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: patches@opensource.cirrus.com Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02Revert "MAINTAINERS: Add entry for Intel MAX 10 mfd driver"Lee Jones1-10/+0
This reverts commit 58d91f1c1701de9420acc43a2f4f8004af85c363. This is a duplicate. Reported-by: Russ Weight <russell.h.weight@intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: ioc3: Directly include linux/irqdomain.hMarc Zyngier1-0/+1
This driver include linux/irqdomain.h via a bizarre set of indirection, which we are about to break. Directly include the required file. Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: axp20x: Allow AXP 806 chips without interrupt linesAndre Przywara1-7/+17
Currently the AXP chip requires to have its IRQ line connected to some interrupt controller, and will fail probing when this is not the case. On a new Allwinner SoC (H616) there is no NMI pin anymore, and at least one board does not connect the AXP's IRQ pin to anything else, so the interrupt functionality of the AXP chip is simply not available. Check whether the interrupt line number returned by the platform code is valid, before trying to register the irqchip. If not, we skip this registration, to avoid the driver to bail out completely. Also we need to skip the power key functionality, as this relies on a valid IRQ as well. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: mt6360: Merge different sub-devices I2C read/writeGene Chen2-23/+181
Merge different sub-devices I2C read/write functions into one Regmap, because PMIC and LDO part need CRC bits for access protection. Signed-off-by: Gene Chen <gene_chen@richtek.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: mt6360: Merge header file into driver and remove unuse register defineGene Chen2-241/+47
Merge header file into driver and remove unuse register define Signed-off-by: Gene Chen <gene_chen@richtek.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: mt6360: Fix flow which is used to check ic existGene Chen1-11/+21
Fix flow which is used to check ic exist. Signed-off-by: Gene Chen <gene_chen@richtek.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: mt6360: Remove handle_post_irq callback functionGene Chen2-14/+5
Remove handle_post_irq which is used to retrigger IRQ. Set IRQ level low trigger in dtsi to keep IRQ always be handled. Signed-off-by: Gene Chen <gene_chen@richtek.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: mt6360: Rename mt6360_pmu by mt6360Gene Chen1-21/+20
Rename mt6360_pmu by mt6360, because of including not only PMU part, but also entire MT6360 IC Signed-off-by: Gene Chen <gene_chen@richtek.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: mt6360: Rename mt6360_pmu_data by mt6360_ddataGene Chen2-23/+23
Rename mt6360_pmu_data by mt6360_ddata because of including not only PMU part, but also entire MT6360 IC. Signed-off-by: Gene Chen <gene_chen@richtek.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-06-02mfd: mt6360: Combine mt6360 pmic/ldo resources into mt6360 regulator resourcesGene Chen1-8/+2
Combine mt6360 pmic/ldo resources into mt6360 regulator resources to simplify the similar resources object. Signed-off-by: Gene Chen <gene_chen@richtek.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-05 18:29:06 +0000