summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2021-01-21lightnvm: fix memory leak when submit failsPan Bian1-2/+1
The allocated page is not released if error occurs in nvm_submit_io_sync_raw(). __free_page() is moved ealier to avoid possible memory leak issue. Fixes: aff3fb18f957 ("lightnvm: move bad block and chunk state logic to core") Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-21Merge tag 'nvme-5.11-2020-01-21' of git://git.infradead.org/nvme into block-5.11Jens Axboe6-50/+129
Pull NVMe fixes from Christoph: "nvme fixes for 5.11: - fix a status code in nvmet (Chaitanya Kulkarni) - avoid double completions in nvme-rdma/nvme-tcp (Chao Leng) - fix the CMB support to cope with NVMe 1.4 controllers (Klaus Jensen) - fix PRINFO handling in the passthrough ioctl (Revanth Rajashekar) - fix a double DMA unmap in nvme-pci" * tag 'nvme-5.11-2020-01-21' of git://git.infradead.org/nvme: nvme-pci: fix error unwind in nvme_map_data nvme-pci: refactor nvme_unmap_data nvmet: set right status on error in id-ns handler nvme-pci: allow use of cmb on v1.4 controllers nvme-tcp: avoid request double completion for concurrent nvme_tcp_timeout nvme-rdma: avoid request double completion for concurrent nvme_rdma_timeout nvme: check the PRINFO bit before deciding the host buffer length
2021-01-20nvme-pci: fix error unwind in nvme_map_dataChristoph Hellwig1-10/+18
Properly unwind step by step using refactored helpers from nvme_unmap_data to avoid a potential double dma_unmap on a mapping failure. Fixes: 7fe07d14f71f ("nvme-pci: merge nvme_free_iod into nvme_unmap_data") Reported-by: Marc Orr <marcorr@google.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Marc Orr <marcorr@google.com>
2021-01-20nvme-pci: refactor nvme_unmap_dataChristoph Hellwig1-28/+49
Split out three helpers from nvme_unmap_data that will allow finer grained unwinding from nvme_map_data. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Keith Busch <kbusch@kernel.org> Reviewed-by: Marc Orr <marcorr@google.com>
2021-01-20Merge branch 'md-fixes' of ↵Jens Axboe1-0/+2
https://git.kernel.org/pub/scm/linux/kernel/git/song/md into block-5.11 Pull MD fix from Song. * 'md-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md: md: Set prev_flush_start and flush_bio in an atomic way
2021-01-20md: Set prev_flush_start and flush_bio in an atomic wayXiao Ni1-0/+2
One customer reports a crash problem which causes by flush request. It triggers a warning before crash. /* new request after previous flush is completed */ if (ktime_after(req_start, mddev->prev_flush_start)) { WARN_ON(mddev->flush_bio); mddev->flush_bio = bio; bio = NULL; } The WARN_ON is triggered. We use spin lock to protect prev_flush_start and flush_bio in md_flush_request. But there is no lock protection in md_submit_flush_data. It can set flush_bio to NULL first because of compiler reordering write instructions. For example, flush bio1 sets flush bio to NULL first in md_submit_flush_data. An interrupt or vmware causing an extended stall happen between updating flush_bio and prev_flush_start. Because flush_bio is NULL, flush bio2 can get the lock and submit to underlayer disks. Then flush bio1 updates prev_flush_start after the interrupt or extended stall. Then flush bio3 enters in md_flush_request. The start time req_start is behind prev_flush_start. The flush_bio is not NULL(flush bio2 hasn't finished). So it can trigger the WARN_ON now. Then it calls INIT_WORK again. INIT_WORK() will re-initialize the list pointers in the work_struct, which then can result in a corrupted work list and the work_struct queued a second time. With the work list corrupted, it can lead in invalid work items being used and cause a crash in process_one_work. We need to make sure only one flush bio can be handled at one same time. So add spin lock in md_submit_flush_data to protect prev_flush_start and flush_bio in an atomic way. Reviewed-by: David Jeffery <djeffery@redhat.com> Signed-off-by: Xiao Ni <xni@redhat.com> Signed-off-by: Song Liu <songliubraving@fb.com>
2021-01-18nvmet: set right status on error in id-ns handlerChaitanya Kulkarni1-2/+6
The function nvmet_execute_identify_ns() doesn't set the status if call to nvmet_find_namespace() fails. In that case we set the status of the request to the value return by the nvmet_copy_sgl(). Set the status to NVME_SC_INVALID_NS and adjust the code such that request will have the right status on nvmet_find_namespace() failure. Without this patch :- NVME Identify Namespace 3: nsze : 0 ncap : 0 nuse : 0 nsfeat : 0 nlbaf : 0 flbas : 0 mc : 0 dpc : 0 dps : 0 nmic : 0 rescap : 0 fpi : 0 dlfeat : 0 nawun : 0 nawupf : 0 nacwu : 0 nabsn : 0 nabo : 0 nabspf : 0 noiob : 0 nvmcap : 0 mssrl : 0 mcl : 0 msrc : 0 nsattr : 0 nvmsetid: 0 anagrpid: 0 endgid : 0 nguid : 00000000000000000000000000000000 eui64 : 0000000000000000 lbaf 0 : ms:0 lbads:0 rp:0 (in use) With this patch-series :- feb3b88b501e (HEAD -> nvme-5.11) nvmet: remove extra variable in identify ns 6302aa67210a nvmet: remove extra variable in id-desclist ed57951da453 nvmet: remove extra variable in smart log nsid be384b8c24dc nvmet: set right status on error in id-ns handler NVMe status: INVALID_NS: The namespace or the format of that namespace is invalid(0xb) Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-01-18nvme-pci: allow use of cmb on v1.4 controllersKlaus Jensen2-0/+20
Since NVMe v1.4 the Controller Memory Buffer must be explicitly enabled by the host. Signed-off-by: Klaus Jensen <k.jensen@samsung.com> [hch: avoid a local variable and add a comment] Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-01-18nvme-tcp: avoid request double completion for concurrent nvme_tcp_timeoutChao Leng1-4/+10
Each name space has a request queue, if complete request long time, multi request queues may have time out requests at the same time, nvme_tcp_timeout will execute concurrently. Multi requests in different request queues may be queued in the same tcp queue, multi nvme_tcp_timeout may call nvme_tcp_stop_queue at the same time. The first nvme_tcp_stop_queue will clear NVME_TCP_Q_LIVE and continue stopping the tcp queue(cancel io_work), but the others check NVME_TCP_Q_LIVE is already cleared, and then directly complete the requests, complete request before the io work is completely canceled may lead to a use-after-free condition. Add a multex lock to serialize nvme_tcp_stop_queue. Signed-off-by: Chao Leng <lengchao@huawei.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-01-18nvme-rdma: avoid request double completion for concurrent nvme_rdma_timeoutChao Leng1-4/+11
A crash happens when inject completing request long time(nearly 30s). Each name space has a request queue, when inject completing request long time, multi request queues may have time out requests at the same time, nvme_rdma_timeout will execute concurrently. Multi requests in different request queues may be queued in the same rdma queue, multi nvme_rdma_timeout may call nvme_rdma_stop_queue at the same time. The first nvme_rdma_timeout will clear NVME_RDMA_Q_LIVE and continue stopping the rdma queue(drain qp), but the others check NVME_RDMA_Q_LIVE is already cleared, and then directly complete the requests, complete request before the qp is fully drained may lead to a use-after-free condition. Add a multex lock to serialize nvme_rdma_stop_queue. Signed-off-by: Chao Leng <lengchao@huawei.com> Tested-by: Israel Rukshin <israelr@nvidia.com> Reviewed-by: Israel Rukshin <israelr@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-01-18nvme: check the PRINFO bit before deciding the host buffer lengthRevanth Rajashekar1-2/+15
According to NVMe spec v1.4, section 8.3.1, the PRINFO bit and the metadata size play a vital role in deteriming the host buffer size. If PRIFNO bit is set and MS==8, the host doesn't add the metadata buffer, instead the controller adds it. Signed-off-by: Revanth Rajashekar <revanth.rajashekar@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-01-14Merge tag 'nvme-5.11-2021-01-14' of git://git.infradead.org/nvme into block-5.11Jens Axboe3-13/+18
Pull NVMe fixes from Christoph: "nvme fixes for 5.11: - don't initialize hwmon for discover controllers (Sagi Grimberg) - fix iov_iter handling in nvme-tcp (Sagi Grimberg) - fix a preempt warning in nvme-tcp (Sagi Grimberg) - fix a possible NULL pointer dereference in nvme (Israel Rukshin)" * tag 'nvme-5.11-2021-01-14' of git://git.infradead.org/nvme: nvme: don't intialize hwmon for discovery controllers nvme-tcp: fix possible data corruption with bio merges nvme-tcp: Fix warning with CONFIG_DEBUG_PREEMPT nvmet-rdma: Fix NULL deref when setting pi_enable and traddr INADDR_ANY
2021-01-14nvme: don't intialize hwmon for discovery controllersSagi Grimberg1-3/+8
Discovery controllers usually don't support smart log page command. So when we connect to the discovery controller we see this warning: nvme nvme0: Failed to read smart log (error 24577) nvme nvme0: new ctrl: NQN "nqn.2014-08.org.nvmexpress.discovery", addr 192.168.123.1:8009 nvme nvme0: Removing ctrl: NQN "nqn.2014-08.org.nvmexpress.discovery" Introduce a new helper to understand if the controller is a discovery controller and use this helper to skip nvme_init_hwmon (also use it in other places that we check if the controller is a discovery controller). Fixes: 400b6a7b13a3 ("nvme: Add hardware monitoring support") Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-01-14nvme-tcp: fix possible data corruption with bio mergesSagi Grimberg1-1/+1
When a bio merges, we can get a request that spans multiple bios, and the overall request payload size is the sum of all bios. When we calculate how much we need to send from the existing bio (and bvec), we did not take into account the iov_iter byte count cap. Since multipage bvecs support, bvecs can split in the middle which means that when we account for the last bvec send we should also take the iov_iter byte count cap as it might be lower than the last bvec size. Reported-by: Hao Wang <pkuwangh@gmail.com> Fixes: 3f2304f8c6d6 ("nvme-tcp: add NVMe over TCP host driver") Tested-by: Hao Wang <pkuwangh@gmail.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-01-14nvme-tcp: Fix warning with CONFIG_DEBUG_PREEMPTSagi Grimberg1-1/+1
We shouldn't call smp_processor_id() in a preemptible context, but this is advisory at best, so instead call __smp_processor_id(). Fixes: db5ad6b7f8cd ("nvme-tcp: try to send request in queue_rq context") Reported-by: Or Gerlitz <gerlitz.or@gmail.com> Reported-by: Yi Zhang <yi.zhang@redhat.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-01-14nvmet-rdma: Fix NULL deref when setting pi_enable and traddr INADDR_ANYIsrael Rukshin1-8/+8
When setting port traddr to INADDR_ANY, the listening cm_id->device is NULL. The associate IB device is known only when a connect request event arrives, so checking T10-PI device capability should be done at this stage. Fixes: b09160c3996c ("nvmet-rdma: add metadata/T10-PI support") Signed-off-by: Israel Rukshin <israelr@nvidia.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-01-09bcache: set bcache device into read-only mode for ↵Coly Li1-0/+15
BCH_FEATURE_INCOMPAT_OBSO_LARGE_BUCKET If BCH_FEATURE_INCOMPAT_OBSO_LARGE_BUCKET is set in incompat feature set, it means the cache device is created with obsoleted layout with obso_bucket_site_hi. Now bcache does not support this feature bit, a new BCH_FEATURE_INCOMPAT_LOG_LARGE_BUCKET_SIZE incompat feature bit is added for a better layout to support large bucket size. For the legacy compatibility purpose, if a cache device created with obsoleted BCH_FEATURE_INCOMPAT_OBSO_LARGE_BUCKET feature bit, all bcache devices attached to this cache set should be set to read-only. Then the dirty data can be written back to backing device before re-create the cache device with BCH_FEATURE_INCOMPAT_LOG_LARGE_BUCKET_SIZE feature bit by the latest bcache-tools. This patch checks BCH_FEATURE_INCOMPAT_OBSO_LARGE_BUCKET feature bit when running a cache set and attach a bcache device to the cache set. If this bit is set, - When run a cache set, print an error kernel message to indicate all following attached bcache device will be read-only. - When attach a bcache device, print an error kernel message to indicate the attached bcache device will be read-only, and ask users to update to latest bcache-tools. Such change is only for cache device whose bucket size >= 32MB, this is for the zoned SSD and almost nobody uses such large bucket size at this moment. If you don't explicit set a large bucket size for a zoned SSD, such change is totally transparent to your bcache device. Fixes: ffa470327572 ("bcache: add bucket_size_hi into struct cache_sb_disk for large bucket") Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-09bcache: introduce BCH_FEATURE_INCOMPAT_LOG_LARGE_BUCKET_SIZE for large bucketColy Li4-8/+29
When large bucket feature was added, BCH_FEATURE_INCOMPAT_LARGE_BUCKET was introduced into the incompat feature set. It used bucket_size_hi (which was added at the tail of struct cache_sb_disk) to extend current 16bit bucket size to 32bit with existing bucket_size in struct cache_sb_disk. This is not a good idea, there are two obvious problems, - Bucket size is always value power of 2, if store log2(bucket size) in existing bucket_size of struct cache_sb_disk, it is unnecessary to add bucket_size_hi. - Macro csum_set() assumes d[SB_JOURNAL_BUCKETS] is the last member in struct cache_sb_disk, bucket_size_hi was added after d[] which makes csum_set calculate an unexpected super block checksum. To fix the above problems, this patch introduces a new incompat feature bit BCH_FEATURE_INCOMPAT_LOG_LARGE_BUCKET_SIZE, when this bit is set, it means bucket_size in struct cache_sb_disk stores the order of power-of-2 bucket size value. When user specifies a bucket size larger than 32768 sectors, BCH_FEATURE_INCOMPAT_LOG_LARGE_BUCKET_SIZE will be set to incompat feature set, and bucket_size stores log2(bucket size) more than store the real bucket size value. The obsoleted BCH_FEATURE_INCOMPAT_LARGE_BUCKET won't be used anymore, it is renamed to BCH_FEATURE_INCOMPAT_OBSO_LARGE_BUCKET and still only recognized by kernel driver for legacy compatible purpose. The previous bucket_size_hi is renmaed to obso_bucket_size_hi in struct cache_sb_disk and not used in bcache-tools anymore. For cache device created with BCH_FEATURE_INCOMPAT_LARGE_BUCKET feature, bcache-tools and kernel driver still recognize the feature string and display it as "obso_large_bucket". With this change, the unnecessary extra space extend of bcache on-disk super block can be avoided, and csum_set() may generate expected check sum as well. Fixes: ffa470327572 ("bcache: add bucket_size_hi into struct cache_sb_disk for large bucket") Signed-off-by: Coly Li <colyli@suse.de> Cc: stable@vger.kernel.org # 5.9+ Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-09bcache: check unsupported feature sets for bcache registerColy Li2-0/+29
This patch adds the check for features which is incompatible for current supported feature sets. Now if the bcache device created by bcache-tools has features that current kernel doesn't support, read_super() will fail with error messoage. E.g. if an unsupported incompatible feature detected, bcache register will fail with dmesg "bcache: register_bcache() error : Unsupported incompatible feature found". Fixes: d721a43ff69c ("bcache: increase super block version for cache device and backing device") Fixes: ffa470327572 ("bcache: add bucket_size_hi into struct cache_sb_disk for large bucket") Signed-off-by: Coly Li <colyli@suse.de> Cc: stable@vger.kernel.org # 5.9+ Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-09bcache: fix typo from SUUP to SUPP in features.hColy Li1-3/+3
This patch fixes the following typos, from BCH_FEATURE_COMPAT_SUUP to BCH_FEATURE_COMPAT_SUPP from BCH_FEATURE_INCOMPAT_SUUP to BCH_FEATURE_INCOMPAT_SUPP from BCH_FEATURE_INCOMPAT_SUUP to BCH_FEATURE_RO_COMPAT_SUPP Fixes: d721a43ff69c ("bcache: increase super block version for cache device and backing device") Fixes: ffa470327572 ("bcache: add bucket_size_hi into struct cache_sb_disk for large bucket") Signed-off-by: Coly Li <colyli@suse.de> Cc: stable@vger.kernel.org # 5.9+ Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-09bcache: set pdev_set_uuid before scond loop iterationYi Li1-1/+1
There is no need to reassign pdev_set_uuid in the second loop iteration, so move it to the place before second loop. Signed-off-by: Yi Li <yili@winhong.com> Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-08blk-mq-debugfs: Add decode for BLK_MQ_F_TAG_HCTX_SHAREDJohn Garry1-0/+1
Showing the hctx flags for when BLK_MQ_F_TAG_HCTX_SHARED is set gives something like: root@debian:/home/john# more /sys/kernel/debug/block/sda/hctx0/flags alloc_policy=FIFO SHOULD_MERGE|TAG_QUEUE_SHARED|3 Add the decoding for that flag. Fixes: 32bc15afed04b ("blk-mq: Facilitate a shared sbitmap per tagset") Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-08block/rnbd-clt: avoid module unload race with close confirmationJack Wang1-1/+2
We had kernel panic, it is caused by unload module and last close confirmation. call trace: [1196029.743127] free_sess+0x15/0x50 [rtrs_client] [1196029.743128] rtrs_clt_close+0x4c/0x70 [rtrs_client] [1196029.743129] ? rnbd_clt_unmap_device+0x1b0/0x1b0 [rnbd_client] [1196029.743130] close_rtrs+0x25/0x50 [rnbd_client] [1196029.743131] rnbd_client_exit+0x93/0xb99 [rnbd_client] [1196029.743132] __x64_sys_delete_module+0x190/0x260 And in the crashdump confirmation kworker is also running. PID: 6943 TASK: ffff9e2ac8098000 CPU: 4 COMMAND: "kworker/4:2" #0 [ffffb206cf337c30] __schedule at ffffffff9f93f891 #1 [ffffb206cf337cc8] schedule at ffffffff9f93fe98 #2 [ffffb206cf337cd0] schedule_timeout at ffffffff9f943938 #3 [ffffb206cf337d50] wait_for_completion at ffffffff9f9410a7 #4 [ffffb206cf337da0] __flush_work at ffffffff9f08ce0e #5 [ffffb206cf337e20] rtrs_clt_close_conns at ffffffffc0d5f668 [rtrs_client] #6 [ffffb206cf337e48] rtrs_clt_close at ffffffffc0d5f801 [rtrs_client] #7 [ffffb206cf337e68] close_rtrs at ffffffffc0d26255 [rnbd_client] #8 [ffffb206cf337e78] free_sess at ffffffffc0d262ad [rnbd_client] #9 [ffffb206cf337e88] rnbd_clt_put_dev at ffffffffc0d266a7 [rnbd_client] The problem is both code path try to close same session, which lead to panic. To fix it, just skip the sess if the refcount already drop to 0. Fixes: f7a7a5c228d4 ("block/rnbd: client: main functionality") Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com> Reviewed-by: Gioh Kim <gi-oh.kim@cloud.ionos.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-08block/rnbd: Adding name to the Contributors ListSwapnil Ingle1-0/+1
Adding name to the Contributors List Signed-off-by: Swapnil Ingle <ingleswapnil@gmail.com> Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Acked-by: Danil Kipnis <danil.kipnis@cloud.ionos.com> Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-08block/rnbd-clt: Fix sg table use after freeGuoqing Jiang1-8/+7
Since dynamically allocate sglist is used for rnbd_iu, we can't free sg table after send_usr_msg since the callback function (cqe.done) could still access the sglist. Otherwise KASAN reports UAF issue: [ 4856.600257] BUG: KASAN: use-after-free in dma_direct_unmap_sg+0x53/0x290 [ 4856.600772] Read of size 4 at addr ffff888206af3a98 by task swapper/1/0 [ 4856.601729] CPU: 1 PID: 0 Comm: swapper/1 Kdump: loaded Tainted: G W 5.10.0-pserver #5.10.0-1+feature+linux+next+20201214.1025+0910d71 [ 4856.601748] Hardware name: Supermicro Super Server/X11DDW-L, BIOS 3.3 02/21/2020 [ 4856.601766] Call Trace: [ 4856.601785] <IRQ> [ 4856.601822] dump_stack+0x99/0xcb [ 4856.601856] ? dma_direct_unmap_sg+0x53/0x290 [ 4856.601888] print_address_description.constprop.7+0x1e/0x230 [ 4856.601913] ? freeze_kernel_threads+0x73/0x73 [ 4856.601965] ? mark_held_locks+0x29/0xa0 [ 4856.602019] ? dma_direct_unmap_sg+0x53/0x290 [ 4856.602039] ? dma_direct_unmap_sg+0x53/0x290 [ 4856.602079] kasan_report.cold.9+0x37/0x7c [ 4856.602188] ? mlx5_ib_post_recv+0x430/0x520 [mlx5_ib] [ 4856.602209] ? dma_direct_unmap_sg+0x53/0x290 [ 4856.602256] dma_direct_unmap_sg+0x53/0x290 [ 4856.602366] complete_rdma_req+0x188/0x4b0 [rtrs_client] [ 4856.602451] ? rtrs_clt_close+0x80/0x80 [rtrs_client] [ 4856.602535] ? mlx5_ib_poll_cq+0x48b/0x16e0 [mlx5_ib] [ 4856.602589] ? radix_tree_insert+0x3a0/0x3a0 [ 4856.602610] ? do_raw_spin_lock+0x119/0x1d0 [ 4856.602647] ? rwlock_bug.part.1+0x60/0x60 [ 4856.602740] rtrs_clt_rdma_done+0x3f7/0x670 [rtrs_client] [ 4856.602804] ? rtrs_clt_rdma_cm_handler+0xda0/0xda0 [rtrs_client] [ 4856.602857] ? check_flags.part.31+0x6c/0x1f0 [ 4856.602927] ? rcu_read_lock_sched_held+0xaf/0xe0 [ 4856.602963] ? rcu_read_lock_bh_held+0xc0/0xc0 [ 4856.603137] __ib_process_cq+0x10a/0x350 [ib_core] [ 4856.603309] ib_poll_handler+0x41/0x1c0 [ib_core] [ 4856.603358] irq_poll_softirq+0xe6/0x280 [ 4856.603392] ? lockdep_hardirqs_on_prepare+0x111/0x210 [ 4856.603446] __do_softirq+0x10d/0x646 [ 4856.603540] asm_call_irq_on_stack+0x12/0x20 [ 4856.603563] </IRQ> [ 4856.605096] Allocated by task 8914: [ 4856.605510] kasan_save_stack+0x19/0x40 [ 4856.605532] __kasan_kmalloc.constprop.7+0xc1/0xd0 [ 4856.605552] __kmalloc+0x155/0x320 [ 4856.605574] __sg_alloc_table+0x155/0x1c0 [ 4856.605594] sg_alloc_table+0x1f/0x50 [ 4856.605620] send_msg_sess_info+0x119/0x2e0 [rnbd_client] [ 4856.605646] remap_devs+0x71/0x210 [rnbd_client] [ 4856.605676] init_sess+0xad8/0xe10 [rtrs_client] [ 4856.605706] rtrs_clt_reconnect_work+0xd6/0x170 [rtrs_client] [ 4856.605728] process_one_work+0x521/0xa90 [ 4856.605748] worker_thread+0x65/0x5b0 [ 4856.605769] kthread+0x1f2/0x210 [ 4856.605789] ret_from_fork+0x22/0x30 [ 4856.606159] Freed by task 8914: [ 4856.606559] kasan_save_stack+0x19/0x40 [ 4856.606580] kasan_set_track+0x1c/0x30 [ 4856.606601] kasan_set_free_info+0x1b/0x30 [ 4856.606622] __kasan_slab_free+0x108/0x150 [ 4856.606642] slab_free_freelist_hook+0x64/0x190 [ 4856.606661] kfree+0xe2/0x650 [ 4856.606681] __sg_free_table+0xa4/0x100 [ 4856.606707] send_msg_sess_info+0x1d6/0x2e0 [rnbd_client] [ 4856.606733] remap_devs+0x71/0x210 [rnbd_client] [ 4856.606763] init_sess+0xad8/0xe10 [rtrs_client] [ 4856.606792] rtrs_clt_reconnect_work+0xd6/0x170 [rtrs_client] [ 4856.606813] process_one_work+0x521/0xa90 [ 4856.606833] worker_thread+0x65/0x5b0 [ 4856.606853] kthread+0x1f2/0x210 [ 4856.606872] ret_from_fork+0x22/0x30 The solution is to free iu's sgtable after the iu is not used anymore. And also move sg_alloc_table into rnbd_get_iu accordingly. Fixes: 5a1328d0c3a7 ("block/rnbd-clt: Dynamically allocate sglist for rnbd_iu") Signed-off-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-08block/rnbd-srv: Fix use after free in rnbd_srv_sess_dev_force_closeJack Wang1-3/+5
KASAN detect following BUG: [ 778.215311] ================================================================== [ 778.216696] BUG: KASAN: use-after-free in rnbd_srv_sess_dev_force_close+0x38/0x60 [rnbd_server] [ 778.219037] Read of size 8 at addr ffff88b1d6516c28 by task tee/8842 [ 778.220500] CPU: 37 PID: 8842 Comm: tee Kdump: loaded Not tainted 5.10.0-pserver #5.10.0-1+feature+linux+next+20201214.1025+0910d71 [ 778.220529] Hardware name: Supermicro Super Server/X11DDW-L, BIOS 3.3 02/21/2020 [ 778.220555] Call Trace: [ 778.220609] dump_stack+0x99/0xcb [ 778.220667] ? rnbd_srv_sess_dev_force_close+0x38/0x60 [rnbd_server] [ 778.220715] print_address_description.constprop.7+0x1e/0x230 [ 778.220750] ? freeze_kernel_threads+0x73/0x73 [ 778.220896] ? rnbd_srv_sess_dev_force_close+0x38/0x60 [rnbd_server] [ 778.220932] ? rnbd_srv_sess_dev_force_close+0x38/0x60 [rnbd_server] [ 778.220994] kasan_report.cold.9+0x37/0x7c [ 778.221066] ? kobject_put+0x80/0x270 [ 778.221102] ? rnbd_srv_sess_dev_force_close+0x38/0x60 [rnbd_server] [ 778.221184] rnbd_srv_sess_dev_force_close+0x38/0x60 [rnbd_server] [ 778.221240] rnbd_srv_dev_session_force_close_store+0x6a/0xc0 [rnbd_server] [ 778.221304] ? sysfs_file_ops+0x90/0x90 [ 778.221353] kernfs_fop_write+0x141/0x240 [ 778.221451] vfs_write+0x142/0x4d0 [ 778.221553] ksys_write+0xc0/0x160 [ 778.221602] ? __ia32_sys_read+0x50/0x50 [ 778.221684] ? lockdep_hardirqs_on_prepare+0x13d/0x210 [ 778.221718] ? syscall_enter_from_user_mode+0x1c/0x50 [ 778.221821] do_syscall_64+0x33/0x40 [ 778.221862] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 778.221896] RIP: 0033:0x7f4affdd9504 [ 778.221928] Code: 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b3 0f 1f 80 00 00 00 00 48 8d 05 f9 61 0d 00 8b 00 85 c0 75 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 41 54 49 89 d4 55 48 89 f5 53 [ 778.221956] RSP: 002b:00007fffebb36b28 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 778.222011] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f4affdd9504 [ 778.222038] RDX: 0000000000000002 RSI: 00007fffebb36c50 RDI: 0000000000000003 [ 778.222066] RBP: 00007fffebb36c50 R08: 0000556a151aa600 R09: 00007f4affeb1540 [ 778.222094] R10: fffffffffffffc19 R11: 0000000000000246 R12: 0000556a151aa520 [ 778.222121] R13: 0000000000000002 R14: 00007f4affea6760 R15: 0000000000000002 [ 778.222764] Allocated by task 3212: [ 778.223285] kasan_save_stack+0x19/0x40 [ 778.223316] __kasan_kmalloc.constprop.7+0xc1/0xd0 [ 778.223347] kmem_cache_alloc_trace+0x186/0x350 [ 778.223382] rnbd_srv_rdma_ev+0xf16/0x1690 [rnbd_server] [ 778.223422] process_io_req+0x4d1/0x670 [rtrs_server] [ 778.223573] __ib_process_cq+0x10a/0x350 [ib_core] [ 778.223709] ib_cq_poll_work+0x31/0xb0 [ib_core] [ 778.223743] process_one_work+0x521/0xa90 [ 778.223773] worker_thread+0x65/0x5b0 [ 778.223802] kthread+0x1f2/0x210 [ 778.223833] ret_from_fork+0x22/0x30 [ 778.224296] Freed by task 8842: [ 778.224800] kasan_save_stack+0x19/0x40 [ 778.224829] kasan_set_track+0x1c/0x30 [ 778.224860] kasan_set_free_info+0x1b/0x30 [ 778.224889] __kasan_slab_free+0x108/0x150 [ 778.224919] slab_free_freelist_hook+0x64/0x190 [ 778.224947] kfree+0xe2/0x650 [ 778.224982] rnbd_destroy_sess_dev+0x2fa/0x3b0 [rnbd_server] [ 778.225011] kobject_put+0xda/0x270 [ 778.225046] rnbd_srv_sess_dev_force_close+0x30/0x60 [rnbd_server] [ 778.225081] rnbd_srv_dev_session_force_close_store+0x6a/0xc0 [rnbd_server] [ 778.225111] kernfs_fop_write+0x141/0x240 [ 778.225140] vfs_write+0x142/0x4d0 [ 778.225169] ksys_write+0xc0/0x160 [ 778.225198] do_syscall_64+0x33/0x40 [ 778.225227] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 778.226506] The buggy address belongs to the object at ffff88b1d6516c00 which belongs to the cache kmalloc-512 of size 512 [ 778.227464] The buggy address is located 40 bytes inside of 512-byte region [ffff88b1d6516c00, ffff88b1d6516e00) The problem is in the sess_dev release function we call rnbd_destroy_sess_dev, and could free the sess_dev already, but we still set the keep_id in rnbd_srv_sess_dev_force_close, which lead to use after free. To fix it, move the keep_id before the sysfs removal, and cache the rnbd_srv_session for lock accessing, Fixes: 786998050cbc ("block/rnbd-srv: close a mapped device from server side.") Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com> Reviewed-by: Guoqing Jiang <guoqing.jiang@cloud.ionos.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-08block/rnbd: Select SG_POOL for RNBD_CLIENTJack Wang1-0/+1
lkp reboot following build error: drivers/block/rnbd/rnbd-clt.c: In function 'rnbd_softirq_done_fn': >> drivers/block/rnbd/rnbd-clt.c:387:2: error: implicit declaration of function 'sg_free_table_chained' [-Werror=implicit-function-declaration] 387 | sg_free_table_chained(&iu->sgt, RNBD_INLINE_SG_CNT); | ^~~~~~~~~~~~~~~~~~~~~ The reason is CONFIG_SG_POOL is not enabled in the config, to avoid such failure, select SG_POOL in Kconfig for RNBD_CLIENT. Fixes: 5a1328d0c3a7 ("block/rnbd-clt: Dynamically allocate sglist for rnbd_iu") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-07block: pre-initialize struct block_device in bdev_alloc_inodeChristoph Hellwig1-2/+3
bdev_evict_inode and bdev_free_inode are also called for the root inode of bdevfs, for which bdev_alloc is never called. Move the zeroing o f struct block_device and the initialization of the bd_bdi field into bdev_alloc_inode to make sure they are initialized for the root inode as well. Fixes: e6cb53827ed6 ("block: initialize struct block_device in bdev_alloc") Reported-by: Alexey Kardashevskiy <aik@ozlabs.ru> Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-07Merge tag 'nvme-5.11-2021-01-07' of git://git.infradead.org/nvme into block-5.11Jens Axboe7-21/+50
Pull NVMe updates from Christoph: "nvme updates for 5.11: - fix a race in the nvme-tcp send code (Sagi Grimberg) - fix a list corruption in an nvme-rdma error path (Israel Rukshin) - avoid a possible double fetch in nvme-pci (Lalithambika Krishnakumar) - add the susystem NQN quirk for a Samsung driver (Gopal Tiwari) - fix two compiler warnings in nvme-fcloop (James Smart) - don't call sleeping functions from irq context in nvme-fc (James Smart) - remove an unused argument (Max Gurtovoy) - remove unused exports (Minwoo Im)" * tag 'nvme-5.11-2021-01-07' of git://git.infradead.org/nvme: nvme: remove the unused status argument from nvme_trace_bio_complete nvmet-rdma: Fix list_del corruption on queue establishment failure nvme: unexport functions with no external caller nvme: avoid possible double fetch in handling CQE nvme-tcp: Fix possible race of io_work and direct send nvme-pci: mark Samsung PM1725a as IGNORE_DEV_SUBNQN nvme-fcloop: Fix sscanf type and list_first_entry_or_null warnings nvme-fc: avoid calling _nvme_fc_abort_outstanding_ios from interrupt context
2021-01-07fs: Fix freeze_bdev()/thaw_bdev() accounting of bd_fsfreeze_sbSatya Tangirala1-0/+2
freeze/thaw_bdev() currently use bdev->bd_fsfreeze_count to infer whether or not bdev->bd_fsfreeze_sb is valid (it's valid iff bd_fsfreeze_count is non-zero). thaw_bdev() doesn't nullify bd_fsfreeze_sb. But this means a freeze_bdev() call followed by a thaw_bdev() call can leave bd_fsfreeze_sb with a non-null value, while bd_fsfreeze_count is zero. If freeze_bdev() is called again, and this time get_active_super() returns NULL (e.g. because the FS is unmounted), we'll end up with bd_fsfreeze_count > 0, but bd_fsfreeze_sb is *untouched* - it stays the same (now garbage) value. A subsequent thaw_bdev() will decide that the bd_fsfreeze_sb value is legitimate (since bd_fsfreeze_count > 0), and attempt to use it. Fix this by always setting bd_fsfreeze_sb to NULL when bd_fsfreeze_count is successfully decremented to 0 in thaw_sb(). Alternatively, we could set bd_fsfreeze_sb to whatever get_active_super() returns in freeze_bdev() whenever bd_fsfreeze_count is successfully incremented to 1 from 0 (which can be achieved cleanly by moving the line currently setting bd_fsfreeze_sb to immediately after the "sync:" label, but it might be a little too subtle/easily overlooked in future). This fixes the currently panicking xfstests generic/085. Fixes: 040f04bd2e82 ("fs: simplify freeze_bdev/thaw_bdev") Signed-off-by: Satya Tangirala <satyat@google.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-06nvme: remove the unused status argument from nvme_trace_bio_completeMax Gurtovoy2-5/+3
The only used argument in this function is the "req". Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com> Reviewed-by: Minwoo Im <minwoo.im.dev@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-01-06nvmet-rdma: Fix list_del corruption on queue establishment failureIsrael Rukshin1-0/+10
When a queue is in NVMET_RDMA_Q_CONNECTING state, it may has some requests at rsp_wait_list. In case a disconnect occurs at this state, no one will empty this list and will return the requests to free_rsps list. Normally nvmet_rdma_queue_established() free those requests after moving the queue to NVMET_RDMA_Q_LIVE state, but in this case __nvmet_rdma_queue_disconnect() is called before. The crash happens at nvmet_rdma_free_rsps() when calling list_del(&rsp->free_list), because the request exists only at the wait list. To fix the issue, simply clear rsp_wait_list when destroying the queue. Signed-off-by: Israel Rukshin <israelr@nvidia.com> Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-01-06nvme: unexport functions with no external callerMinwoo Im2-7/+2
There are no callers for nvme_reset_ctrl_sync() and nvme_alloc_request_qid() so that we keep the symbols exported. Unexport those functions, mark them static and update the header file respectively. Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-01-06nvme: avoid possible double fetch in handling CQELalithambika Krishnakumar1-3/+4
While handling the completion queue, keep a local copy of the command id from the DMA-accessible completion entry. This silences a time-of-check to time-of-use (TOCTOU) warning from KF/x[1], with respect to a Thunderclap[2] vulnerability analysis. The double-read impact appears benign. There may be a theoretical window for @command_id to be used as an adversary-controlled array-index-value for mounting a speculative execution attack, but that mitigation is saved for a potential follow-on. A man-in-the-middle attack on the data payload is out of scope for this analysis and is hopefully mitigated by filesystem integrity mechanisms. [1] https://github.com/intel/kernel-fuzzer-for-xen-project [2] http://thunderclap.io/thunderclap-paper-ndss2019.pdf Signed-off-by: Lalithambika Krishna Kumar <lalithambika.krishnakumar@intel.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-01-06nvme-tcp: Fix possible race of io_work and direct sendSagi Grimberg1-1/+11
We may send a request (with or without its data) from two paths: 1. From our I/O context nvme_tcp_io_work which is triggered from: - queue_rq - r2t reception - socket data_ready and write_space callbacks 2. Directly from queue_rq if the send_list is empty (because we want to save the context switch associated with scheduling our io_work). However, given that now we have the send_mutex, we may run into a race condition where none of these contexts will send the pending payload to the controller. Both io_work send path and queue_rq send path opportunistically attempt to acquire the send_mutex however queue_rq only attempts to send a single request, and if io_work context fails to acquire the send_mutex it will complete without rescheduling itself. The race can trigger with the following sequence: 1. queue_rq sends request (no incapsule data) and blocks 2. RX path receives r2t - prepares data PDU to send, adds h2cdata PDU to the send_list and schedules io_work 3. io_work triggers and cannot acquire the send_mutex - because of (1), ends without self rescheduling 4. queue_rq completes the send, and completes ==> no context will send the h2cdata - timeout. Fix this by having queue_rq sending as much as it can from the send_list such that if it still has any left, its because the socket buffer is full and the socket write_space callback will trigger, thus guaranteeing that a context will be scheduled to send the h2cdata PDU. Fixes: db5ad6b7f8cd ("nvme-tcp: try to send request in queue_rq context") Reported-by: Potnuri Bharat Teja <bharat@chelsio.com> Reported-by: Samuel Jones <sjones@kalrayinc.com> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Tested-by: Potnuri Bharat Teja <bharat@chelsio.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-01-06nvme-pci: mark Samsung PM1725a as IGNORE_DEV_SUBNQNGopal Tiwari1-1/+2
A system with more than one of these SSDs will only have one usable. Hence the kernel fails to detect nvme devices due to duplicate cntlids. [ 6.274554] nvme nvme1: Duplicate cntlid 33 with nvme0, rejecting [ 6.274566] nvme nvme1: Removing after probe failure status: -22 Adding the NVME_QUIRK_IGNORE_DEV_SUBNQN quirk to resolves the issue. Signed-off-by: Gopal Tiwari <gtiwari@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-01-06nvme-fcloop: Fix sscanf type and list_first_entry_or_null warningsJames Smart1-3/+4
Kernel robot had the following warnings: >> fcloop.c:1506:6: warning: %x in format string (no. 1) requires >> 'unsigned int *' but the argument type is 'signed int *'. >> [invalidScanfArgType_int] >> if (sscanf(buf, "%x:%d:%d", &opcode, &starting, &amount) != 3) >> ^ Resolve by changing opcode from and int to an unsigned int and >> fcloop.c:1632:32: warning: Uninitialized variable: lport [uninitvar] >> ret = __wait_localport_unreg(lport); >> ^ >> fcloop.c:1615:28: warning: Uninitialized variable: nport [uninitvar] >> ret = __remoteport_unreg(nport, rport); >> ^ These aren't actual issues as the values are assigned prior to use. It appears the tool doesn't understand list_first_entry_or_null(). Regardless, quiet the tool by initializing the pointers to NULL at declaration. Signed-off-by: James Smart <james.smart@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-01-06nvme-fc: avoid calling _nvme_fc_abort_outstanding_ios from interrupt contextJames Smart1-1/+14
Recent patches changed calling sequences. nvme_fc_abort_outstanding_ios used to be called from a timeout or work context. Now it is being called in an io completion context, which can be an interrupt handler. Unfortunately, the abort outstanding ios routine attempts to stop nvme queues and nested routines that may try to sleep, which is in conflict with the interrupt handler. Correct replacing the direct call with a work element scheduling, and the abort outstanding ios routine will be called in the work element. Fixes: 95ced8a2c72d ("nvme-fc: eliminate terminate_io use by nvme_fc_error_recovery") Signed-off-by: James Smart <james.smart@broadcom.com> Reported-by: Daniel Wagner <dwagner@suse.de> Tested-by: Daniel Wagner <dwagner@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-01-05block: fix use-after-free in disk_part_iter_nextMing Lei1-4/+7
Make sure that bdgrab() is done on the 'block_device' instance before referring to it for avoiding use-after-free. Cc: <stable@vger.kernel.org> Reported-by: syzbot+825f0f9657d4e528046e@syzkaller.appspotmail.com Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-05bfq: Fix computation of shallow depthJan Kara1-4/+4
BFQ computes number of tags it allows to be allocated for each request type based on tag bitmap. However it uses 1 << bitmap.shift as number of available tags which is wrong. 'shift' is just an internal bitmap value containing logarithm of how many bits bitmap uses in each bitmap word. Thus number of tags allowed for some request types can be far to low. Use proper bitmap.depth which has the number of tags instead. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-05blk-iocost: fix NULL iocg deref from racing against initializationTejun Heo1-5/+11
When initializing iocost for a queue, its rqos should be registered before the blkcg policy is activated to allow policy data initiailization to lookup the associated ioc. This unfortunately means that the rqos methods can be called on bios before iocgs are attached to all existing blkgs. While the race is theoretically possible on ioc_rqos_throttle(), it mostly happened in ioc_rqos_merge() due to the difference in how they lookup ioc. The former determines it from the passed in @rqos and then bails before dereferencing iocg if the looked up ioc is disabled, which most likely is the case if initialization is still in progress. The latter looked up ioc by dereferencing the possibly NULL iocg making it a lot more prone to actually triggering the bug. * Make ioc_rqos_merge() use the same method as ioc_rqos_throttle() to look up ioc for consistency. * Make ioc_rqos_throttle() and ioc_rqos_merge() test for NULL iocg before dereferencing it. * Explain the danger of NULL iocgs in blk_iocost_init(). Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Jonathan Lemon <bsd@fb.com> Cc: stable@vger.kernel.org # v5.4+ Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-03lightnvm: select CONFIG_CRC32Arnd Bergmann1-0/+1
Without CRC32 support, this fails to link: arm-linux-gnueabi-ld: drivers/lightnvm/pblk-init.o: in function `pblk_init': pblk-init.c:(.text+0x2654): undefined reference to `crc32_le' arm-linux-gnueabi-ld: drivers/lightnvm/pblk-init.o: in function `pblk_exit': pblk-init.c:(.text+0x2a7c): undefined reference to `crc32_le' Fixes: a4bd217b4326 ("lightnvm: physical block device (pblk) target") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-01-03block: rsxx: select CONFIG_CRC32Arnd Bergmann1-0/+1
Without crc32, the driver fails to link: arm-linux-gnueabi-ld: drivers/block/rsxx/config.o: in function `rsxx_load_config': config.c:(.text+0x124): undefined reference to `crc32_le' Fixes: 8722ff8cdbfa ("block: IBM RamSan 70/80 device driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-29block: add debugfs stanza for QUEUE_FLAG_NOWAITAndres Freund1-0/+1
This was missed in 021a24460dc2. Leads to the numeric value of QUEUE_FLAG_NOWAIT (i.e. 29) showing up in /sys/kernel/debug/block/*/state. Fixes: 021a24460dc28e7412aecfae89f60e1847e685c0 Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Cc: Mike Snitzer <snitzer@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andres Freund <andres@anarazel.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-29fs: block_dev.c: fix kernel-doc warnings from struct block_device changesRandy Dunlap1-1/+1
Fix new kernel-doc warnings in fs/block_dev.c: ../fs/block_dev.c:1066: warning: Excess function parameter 'whole' description in 'bd_abort_claiming' ../fs/block_dev.c:1837: warning: Function parameter or member 'dev' not described in 'lookup_bdev' Fixes: 4e7b5671c6a8 ("block: remove i_bdev") Fixes: 37c3fc9abb25 ("block: simplify the block device claiming interface") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Christoph Hellwig <hch@lst.de> Cc: linux-fsdevel@vger.kernel.org Cc: Alexander Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-12-27Linux 5.11-rc1v5.11-rc1Linus Torvalds1-2/+2
2020-12-27proc mountinfo: make splice available againLinus Torvalds1-3/+6
Since commit 36e2c7421f02 ("fs: don't allow splice read/write without explicit ops") we've required that file operation structures explicitly enable splice support, rather than falling back to the default handlers. Most /proc files use the indirect 'struct proc_ops' to describe their file operations, and were fixed up to support splice earlier in commits 40be821d627c..b24c30c67863, but the mountinfo files interact with the VFS directly using their own 'struct file_operations' and got missed as a result. This adds the necessary support for splice to work for /proc/*/mountinfo and friends. Reported-by: Joan Bruguera Micó <joanbrugueram@gmail.com> Reported-by: Jussi Kivilinna <jussi.kivilinna@iki.fi> Link: https://bugzilla.kernel.org/show_bug.cgi?id=209971 Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-27Merge tag 'ntb-5.11' of git://github.com/jonmason/ntbLinus Torvalds4-3/+44
Pull NTB fixes from Jon Mason: "Bug fix for IDT NTB and Intel NTB LTR management support" * tag 'ntb-5.11' of git://github.com/jonmason/ntb: ntb: intel: add Intel NTB LTR vendor support for gen4 NTB ntb: idt: fix error check in ntb_hw_idt.c
2020-12-27Merge branch 'linus' of ↵Linus Torvalds2-2/+4
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: "Fix a number of autobuild failures due to missing Kconfig dependencies" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: qat - add CRYPTO_AES to Kconfig dependencies crypto: keembay - Add dependency on HAS_IOMEM crypto: keembay - CRYPTO_DEV_KEEMBAY_OCS_AES_SM4 should depend on ARCH_KEEMBAY
2020-12-27Merge tag 'objtool-urgent-2020-12-27' of ↵Linus Torvalds4-26/+42
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool fix from Ingo Molnar: "Fix a segfault that occurs when built with Clang" * tag 'objtool-urgent-2020-12-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Fix seg fault with Clang non-section symbols
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-01 18:49:54 +0000