summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2021-02-25drm/atomic: Pass the full state to planes atomic disable and updateMaxime Ripard58-123/+207
The current atomic helpers have either their object state being passed as an argument or the full atomic state. The former is the pattern that was done at first, before switching to the latter for new hooks or when it was needed. Let's convert the remaining helpers to provide a consistent interface, this time with the planes atomic_update and atomic_disable. The conversion was done using the coccinelle script below, built tested on all the drivers. @@ identifier plane, plane_state; symbol state; @@ struct drm_plane_helper_funcs { ... void (*atomic_update)(struct drm_plane *plane, - struct drm_plane_state *plane_state); + struct drm_atomic_state *state); ... } @@ identifier plane, plane_state; symbol state; @@ struct drm_plane_helper_funcs { ... void (*atomic_disable)(struct drm_plane *plane, - struct drm_plane_state *plane_state); + struct drm_atomic_state *state); ... } @ plane_atomic_func @ identifier helpers; identifier func; @@ ( static const struct drm_plane_helper_funcs helpers = { ..., .atomic_update = func, ..., }; | static const struct drm_plane_helper_funcs helpers = { ..., .atomic_disable = func, ..., }; ) @@ struct drm_plane_helper_funcs *FUNCS; identifier f; identifier crtc_state; identifier plane, plane_state, state; expression e; @@ f(struct drm_crtc_state *crtc_state) { ... struct drm_atomic_state *state = e; <+... ( - FUNCS->atomic_disable(plane, plane_state) + FUNCS->atomic_disable(plane, state) | - FUNCS->atomic_update(plane, plane_state) + FUNCS->atomic_update(plane, state) ) ...+> } @@ identifier plane_atomic_func.func; identifier plane; symbol state; @@ func(struct drm_plane *plane, - struct drm_plane_state *state) + struct drm_plane_state *old_plane_state) { <... - state + old_plane_state ...> } @ ignores_old_state @ identifier plane_atomic_func.func; identifier plane, old_state; @@ func(struct drm_plane *plane, struct drm_plane_state *old_state) { ... when != old_state } @ adds_old_state depends on plane_atomic_func && !ignores_old_state @ identifier plane_atomic_func.func; identifier plane, plane_state; @@ func(struct drm_plane *plane, struct drm_plane_state *plane_state) { + struct drm_plane_state *plane_state = drm_atomic_get_old_plane_state(state, plane); ... } @ depends on plane_atomic_func @ identifier plane_atomic_func.func; identifier plane, plane_state; @@ func(struct drm_plane *plane, - struct drm_plane_state *plane_state + struct drm_atomic_state *state ) { ... } @ include depends on adds_old_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && adds_old_state @ @@ + #include <drm/drm_atomic.h> #include <drm/...> @@ identifier plane_atomic_func.func; identifier plane, state; identifier plane_state; @@ func(struct drm_plane *plane, struct drm_atomic_state *state) { ... struct drm_plane_state *plane_state = drm_atomic_get_old_plane_state(state, plane); <+... - plane_state->state + state ...+> } Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-9-maxime@cerno.tech
2021-02-24drm: Rename plane->state variables in atomic update and disableMaxime Ripard30-347/+355
Some drivers are storing the plane->state pointer in atomic_update and atomic_disable in a variable simply called state, while the state passed as an argument is called old_state. In order to ease subsequent reworks and to avoid confusing or inconsistent names, let's rename those variables to new_state. This was done using the following coccinelle script, plus some manual changes for mtk and tegra. @ plane_atomic_func @ identifier helpers; identifier func; @@ ( static const struct drm_plane_helper_funcs helpers = { ..., .atomic_disable = func, ..., }; | static const struct drm_plane_helper_funcs helpers = { ..., .atomic_update = func, ..., }; ) @ moves_new_state_old_state @ identifier plane_atomic_func.func; identifier plane; symbol old_state; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *old_state) { ... - struct drm_plane_state *state = plane->state; + struct drm_plane_state *new_state = plane->state; ... } @ depends on moves_new_state_old_state @ identifier plane_atomic_func.func; identifier plane; identifier old_state; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *old_state) { <... - state + new_state ...> } @ moves_new_state_oldstate @ identifier plane_atomic_func.func; identifier plane; symbol oldstate; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *oldstate) { ... - struct drm_plane_state *state = plane->state; + struct drm_plane_state *newstate = plane->state; ... } @ depends on moves_new_state_oldstate @ identifier plane_atomic_func.func; identifier plane; identifier old_state; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *old_state) { <... - state + newstate ...> } @ moves_new_state_old_pstate @ identifier plane_atomic_func.func; identifier plane; symbol old_pstate; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *old_pstate) { ... - struct drm_plane_state *state = plane->state; + struct drm_plane_state *new_pstate = plane->state; ... } @ depends on moves_new_state_old_pstate @ identifier plane_atomic_func.func; identifier plane; identifier old_pstate; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *old_pstate) { <... - state + new_pstate ...> } Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-8-maxime@cerno.tech
2021-02-24drm: Store new plane state in a variable for atomic_update and disableMaxime Ripard22-126/+151
In order to store the new plane state in a subsequent helper, let's move the plane->state dereferences into a variable. This was done using the following coccinelle script, plus some hand changes for vmwgfx: @ plane_atomic_func @ identifier helpers; identifier func; @@ ( static const struct drm_plane_helper_funcs helpers = { ..., .atomic_disable = func, ..., }; | static const struct drm_plane_helper_funcs helpers = { ..., .atomic_update = func, ..., }; ) @ has_new_state_old_state @ identifier plane_atomic_func.func; identifier plane; identifier new_state; symbol old_state; @@ func(struct drm_plane *plane, struct drm_plane_state *old_state) { ... struct drm_plane_state *new_state = plane->state; ... } @ depends on !has_new_state_old_state @ identifier plane_atomic_func.func; identifier plane; symbol old_state; @@ func(struct drm_plane *plane, struct drm_plane_state *old_state) { + struct drm_plane_state *new_state = plane->state; <+... - plane->state + new_state ...+> } @ has_new_state_state @ identifier plane_atomic_func.func; identifier plane; identifier new_state; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *state) { ... struct drm_plane_state *new_state = plane->state; ... } @ depends on !has_new_state_state @ identifier plane_atomic_func.func; identifier plane; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *state) { + struct drm_plane_state *new_plane_state = plane->state; <+... - plane->state + new_plane_state ...+> } @ has_new_state_old_s @ identifier plane_atomic_func.func; identifier plane; identifier new_state; symbol old_s; @@ func(struct drm_plane *plane, struct drm_plane_state *old_s) { ... struct drm_plane_state *new_state = plane->state; ... } @ depends on !has_new_state_old_s @ identifier plane_atomic_func.func; identifier plane; symbol old_s; @@ func(struct drm_plane *plane, struct drm_plane_state *old_s) { + struct drm_plane_state *new_s = plane->state; <+... - plane->state + new_s ...+> } Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://lore.kernel.org/r/20210219120032.260676-1-maxime@cerno.tech
2021-02-24drm: Use state helper instead of plane state pointer in atomic_checkMaxime Ripard5-13/+21
Many drivers reference the plane->state pointer in order to get the current plane state in their atomic_check hook, which would be the old plane state in the global atomic state since _swap_state hasn't happened when atomic_check is run. Use the drm_atomic_get_old_plane_state helper to get that state to make it more obvious. This was made using the coccinelle script below: @ plane_atomic_func @ identifier helpers; identifier func; @@ static struct drm_plane_helper_funcs helpers = { ..., .atomic_check = func, ..., }; @ replaces_old_state @ identifier plane_atomic_func.func; identifier plane, state, plane_state; @@ func(struct drm_plane *plane, struct drm_atomic_state *state) { ... - struct drm_plane_state *plane_state = plane->state; + struct drm_plane_state *plane_state = drm_atomic_get_old_plane_state(state, plane); ... } @@ identifier plane_atomic_func.func; identifier plane, state, plane_state; @@ func(struct drm_plane *plane, struct drm_atomic_state *state) { struct drm_plane_state *plane_state = drm_atomic_get_old_plane_state(state, plane); <... - plane->state + plane_state ...> } @ adds_old_state @ identifier plane_atomic_func.func; identifier plane, state; @@ func(struct drm_plane *plane, struct drm_atomic_state *state) { + struct drm_plane_state *old_plane_state = drm_atomic_get_old_plane_state(state, plane); <... - plane->state + old_plane_state ...> } @ include depends on adds_old_state || replaces_old_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && (adds_old_state || replaces_old_state) @ @@ + #include <drm/drm_atomic.h> #include <drm/...> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-6-maxime@cerno.tech
2021-02-24drm: Use the state pointer directly in planes atomic_checkMaxime Ripard35-42/+41
Now that atomic_check takes the global atomic state as a parameter, we don't need to go through the pointer in the plane state. This was done using the following coccinelle script: @ plane_atomic_func @ identifier helpers; identifier func; @@ static struct drm_plane_helper_funcs helpers = { ..., .atomic_check = func, ..., }; @@ identifier plane_atomic_func.func; identifier plane, state; identifier plane_state; @@ func(struct drm_plane *plane, struct drm_atomic_state *state) { ... - struct drm_plane_state *plane_state = drm_atomic_get_new_plane_state(state, plane); <... when != plane_state - plane_state->state + state ...> } @@ identifier plane_atomic_func.func; identifier plane, state; identifier plane_state; @@ func(struct drm_plane *plane, struct drm_atomic_state *state) { ... struct drm_plane_state *plane_state = drm_atomic_get_new_plane_state(state, plane); <... - plane_state->state + state ...> } Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-5-maxime@cerno.tech
2021-02-24drm/atomic: Pass the full state to planes atomic_checkMaxime Ripard51-60/+164
The current atomic helpers have either their object state being passed as an argument or the full atomic state. The former is the pattern that was done at first, before switching to the latter for new hooks or when it was needed. Let's convert all the remaining helpers to provide a consistent interface, starting with the planes atomic_check. The conversion was done using the coccinelle script below plus some manual changes for vmwgfx, built tested on all the drivers. @@ identifier plane, plane_state; symbol state; @@ struct drm_plane_helper_funcs { ... int (*atomic_check)(struct drm_plane *plane, - struct drm_plane_state *plane_state); + struct drm_atomic_state *state); ... } @ plane_atomic_func @ identifier helpers; identifier func; @@ static const struct drm_plane_helper_funcs helpers = { ..., .atomic_check = func, ..., }; @@ struct drm_plane_helper_funcs *FUNCS; identifier f; identifier dev; identifier plane, plane_state, state; @@ f(struct drm_device *dev, struct drm_atomic_state *state) { <+... - FUNCS->atomic_check(plane, plane_state) + FUNCS->atomic_check(plane, state) ...+> } @ ignores_new_state @ identifier plane_atomic_func.func; identifier plane, new_plane_state; @@ func(struct drm_plane *plane, struct drm_plane_state *new_plane_state) { ... when != new_plane_state } @ adds_new_state depends on plane_atomic_func && !ignores_new_state @ identifier plane_atomic_func.func; identifier plane, new_plane_state; @@ func(struct drm_plane *plane, struct drm_plane_state *new_plane_state) { + struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state, plane); ... } @ depends on plane_atomic_func @ identifier plane_atomic_func.func; identifier plane, new_plane_state; @@ func(struct drm_plane *plane, - struct drm_plane_state *new_plane_state + struct drm_atomic_state *state ) { ... } @ include depends on adds_new_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && adds_new_state @ @@ + #include <drm/drm_atomic.h> #include <drm/...> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-4-maxime@cerno.tech
2021-02-24drm/atmel-hlcdc: Rename custom plane state variableMaxime Ripard1-59/+59
Subsequent reworks will pass the global atomic state in the function prototype, and atomic_check and atomic_update already have such a variable already. Let's change them to ease the rework. Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-3-maxime@cerno.tech
2021-02-24drm: Rename plane atomic_check state namesMaxime Ripard41-358/+403
Most drivers call the argument to the plane atomic_check hook simply state, which is going to conflict with the global atomic state in a later rework. Let's rename it to new_plane_state (or new_state depending on the convention used in the driver). This was done using the coccinelle script below, and built tested: @ plane_atomic_func @ identifier helpers; identifier func; @@ static const struct drm_plane_helper_funcs helpers = { .atomic_check = func, }; @ has_old_state @ identifier plane_atomic_func.func; identifier plane; expression e; symbol old_state; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *state) { ... struct drm_plane_state *old_state = e; ... } @ depends on has_old_state @ identifier plane_atomic_func.func; identifier plane; symbol old_state; @@ func(struct drm_plane *plane, - struct drm_plane_state *state + struct drm_plane_state *new_state ) { <+... - state + new_state ...+> } @ has_state @ identifier plane_atomic_func.func; identifier plane; symbol state; @@ func(struct drm_plane *plane, struct drm_plane_state *state) { ... } @ depends on has_state @ identifier plane_atomic_func.func; identifier plane; symbol old_state; @@ func(struct drm_plane *plane, - struct drm_plane_state *state + struct drm_plane_state *new_plane_state ) { <+... - state + new_plane_state ...+> } Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-2-maxime@cerno.tech
2021-02-24drm/atomic: Pass the full state to planes async atomic check and updateMaxime Ripard7-73/+90
The current atomic helpers have either their object state being passed as an argument or the full atomic state. The former is the pattern that was done at first, before switching to the latter for new hooks or when it was needed. Let's start convert all the remaining helpers to provide a consistent interface, starting with the planes atomic_async_check and atomic_async_update. The conversion was done using the coccinelle script below, built tested on all the drivers. @@ identifier plane, plane_state; symbol state; @@ struct drm_plane_helper_funcs { ... int (*atomic_async_check)(struct drm_plane *plane, - struct drm_plane_state *plane_state); + struct drm_atomic_state *state); ... } @@ identifier plane, plane_state; symbol state; @@ struct drm_plane_helper_funcs { ... void (*atomic_async_update)(struct drm_plane *plane, - struct drm_plane_state *plane_state); + struct drm_atomic_state *state); ... } @ plane_atomic_func @ identifier helpers; identifier func; @@ ( static const struct drm_plane_helper_funcs helpers = { ..., .atomic_async_check = func, ..., }; | static const struct drm_plane_helper_funcs helpers = { ..., .atomic_async_update = func, ..., }; ) @@ struct drm_plane_helper_funcs *FUNCS; identifier f; identifier dev; identifier plane, plane_state, state; @@ f(struct drm_device *dev, struct drm_atomic_state *state) { <+... - FUNCS->atomic_async_check(plane, plane_state) + FUNCS->atomic_async_check(plane, state) ...+> } @@ struct drm_plane_helper_funcs *FUNCS; identifier f; identifier dev; identifier plane, plane_state, state; @@ f(struct drm_device *dev, struct drm_atomic_state *state) { <+... - FUNCS->atomic_async_update(plane, plane_state) + FUNCS->atomic_async_update(plane, state) ...+> } @@ identifier mtk_plane_atomic_async_update; identifier plane; symbol new_state, state; expression e; @@ void mtk_plane_atomic_async_update(struct drm_plane *plane, struct drm_plane_state *new_state) { ... - struct mtk_plane_state *state = e; + struct mtk_plane_state *new_plane_state = e; <+... - state + new_plane_state ...+> } @@ identifier plane_atomic_func.func; identifier plane; symbol state; @@ func(struct drm_plane *plane, - struct drm_plane_state *state) + struct drm_plane_state *new_plane_state) { <... - state + new_plane_state ...> } @ ignores_new_state @ identifier plane_atomic_func.func; identifier plane, new_plane_state; @@ func(struct drm_plane *plane, struct drm_plane_state *new_plane_state) { ... when != new_plane_state } @ adds_new_state depends on plane_atomic_func && !ignores_new_state @ identifier plane_atomic_func.func; identifier plane, new_plane_state; @@ func(struct drm_plane *plane, struct drm_plane_state *new_plane_state) { + struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state, plane); ... } @ depends on plane_atomic_func @ identifier plane_atomic_func.func; identifier plane, plane_state; @@ func(struct drm_plane *plane, - struct drm_plane_state *plane_state + struct drm_atomic_state *state ) { ... } @ include depends on adds_new_state @ @@ #include <drm/drm_atomic.h> @ no_include depends on !include && adds_new_state @ @@ + #include <drm/drm_atomic.h> #include <drm/...> @@ identifier plane_atomic_func.func; identifier plane, state; identifier plane_state; @@ func(struct drm_plane *plane, struct drm_atomic_state *state) { ... struct drm_plane_state *plane_state = drm_atomic_get_new_plane_state(state, plane); <+... - plane_state->state + state ...+> } Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210219120032.260676-1-maxime@cerno.tech
2021-02-24drm/dp_mst: Set CLEAR_PAYLOAD_ID_TABLE as broadcastWayne Lin1-1/+3
[Why & How] According to DP spec, CLEAR_PAYLOAD_ID_TABLE is a path broadcast request message and current implementation is incorrect. Fix it. Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210224101521.6713-3-Wayne.Lin@amd.com
2021-02-24drm/dp_mst: Revise broadcast msg lct & lcrWayne Lin1-4/+9
[Why & How] According to DP spec, broadcast message LCT equals to 1 and LCR equals to 6. Current implementation is incorrect. Fix it. In addition, revise a bit the hdr->rad handling to include broadcast case. Signed-off-by: Wayne Lin <Wayne.Lin@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210224101521.6713-2-Wayne.Lin@amd.com
2021-02-23drm: Fix HDMI_STATIC_METADATA_TYPE1 constantMario Kleiner1-1/+1
According to the CTA 861.G spec, HDMI_STATIC_METADATA_TYPE1 is not 1, but zero, so fix this enum. While this doesn't cause problems in the kernel yet, as the constant isn't actively used by drivers yet, it did create confusion while debugging HDR problems in yours truly, and also potential bugs in userspace components, as the wrong enum propagates to components, e.g., like it did already into intel-gpu-tools (tests/kms_hdr.c) or is used as wrong reference when writing future new userspace HDR components like compositors. Fixes: fbb5d0353c62 ("drm: Add HDR source metadata property") Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Cc: Uma Shankar <uma.shankar@intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Simon Ser <contact@emersion.fr> Signed-off-by: Simon Ser <contact@emersion.fr> Link: https://patchwork.freedesktop.org/patch/msgid/20210124044010.18678-1-mario.kleiner.de@gmail.com
2021-02-23drm/vkms: Annotate vblank timerDaniel Vetter1-1/+7
This is needed to signal the fences from page flips, annotate it accordingly. We need to annotate entire timer callback since if we get stuck anywhere in there, then the timer stops, and hence fences stop. Just annotating the top part that does the vblank handling isn't enough. Tested-by: Melissa Wen <melissa.srw@gmail.com> Reviewed-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Cc: linux-media@vger.kernel.org Cc: linaro-mm-sig@lists.linaro.org Cc: linux-rdma@vger.kernel.org Cc: amd-gfx@lists.freedesktop.org Cc: intel-gfx@lists.freedesktop.org Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Christian König <christian.koenig@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Cc: Haneen Mohammed <hamohammed.sa@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210121152959.1725404-3-daniel.vetter@ffwll.ch
2021-02-23drm/komeda: Annotate dma-fence critical section in commit pathDaniel Vetter1-0/+3
Like the helpers, nothing special. Well except not, because we the critical section extends until after hw_done(), since that's the last thing which could hold up a subsequent atomic commit. That means the wait_for_flip_done is included, but that's not a problem, we're allowed to call dma_fence_wait() from signalling critical sections. Even on our own fence (which this does), it's just a bit confusing. But in a way those last 2 function calls are already part of the fence signalling critical section for the next atomic commit. Reading this I'm wondering why komeda waits for flip_done() before calling hw_done(), which is a bit backwards (but hey hw can be special). Might be good to throw a comment in there that explains why, because the original commit that added this just doesn't. v2: Small rebase Reviewed-by: James Qian Wang <james.qian.wang@arm.com> (v1) Cc: "James (Qian) Wang" <james.qian.wang@arm.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Mihail Atanassov <mihail.atanassov@arm.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210121152959.1725404-5-daniel.vetter@ffwll.ch
2021-02-23drm/malidp: Annotate dma-fence critical section in commit pathDaniel Vetter1-0/+3
Again needs to be put right after the call to drm_atomic_helper_commit_hw_done(), since that's the last thing which can hold up a subsequent atomic commit. No surprises here. Acked-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: "James (Qian) Wang" <james.qian.wang@arm.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Mihail Atanassov <mihail.atanassov@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210121152959.1725404-6-daniel.vetter@ffwll.ch
2021-02-23drm/atmel: Use drm_atomic_helper_commitDaniel Vetter2-112/+2
One of these drivers that predates the nonblocking support in helpers, and hand-rolled its own thing. Entirely not anything specific here, we can just delete it all and replace it with the helper version. Could also perhaps use the drm_mode_config_helper_suspend/resume stuff, for another few lines deleted. But I'm not looking at that stuff, I'm just going through all the atomic commit functions and make sure they have properly annotated dma-fence critical sections everywhere. v2: - Also delete the workqueue (Sam) - drop the @commit kerneldoc, I missed that one. Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Boris Brezillon <bbrezillon@kernel.org> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Cc: linux-arm-kernel@lists.infradead.org Link: https://patchwork.freedesktop.org/patch/msgid/20210121152959.1725404-7-daniel.vetter@ffwll.ch
2021-02-23drm/omapdrm: Annotate dma-fence critical section in commit pathDaniel Vetter1-4/+5
Nothing special, just put the end right after hw_done(). Note that in one path there's a wait for the flip/update to complete. But as far as I understand from comments and code that's only relevant for modesets, and skipped if there wasn't a modeset done on a given crtc. For a bit more clarity pull the hw_done() call out of the if/else, that way it's a bit clearer flow. But happy to shuffle this around as is seen fit. Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210121152959.1725404-9-daniel.vetter@ffwll.ch
2021-02-23drm/tegra: Annotate dma-fence critical section in commit pathDaniel Vetter1-0/+3
Again ends just after drm_atomic_helper_commit_hw_done(), but with the twist that we need to make sure we're only annotate the custom version. And not the other clause which just calls drm_atomic_helper_commit_tail_rpm(), which is already annotated. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Acked-by: Thierry Reding <treding@nvidia.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: linux-tegra@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20210121152959.1725404-11-daniel.vetter@ffwll.ch
2021-02-23drm/tidss: Annotate dma-fence critical section in commit pathDaniel Vetter1-0/+4
Ends right after hw_done(), totally standard case. Acked-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Jyri Sarha <jsarha@ti.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210121152959.1725404-12-daniel.vetter@ffwll.ch
2021-02-23drm/gem: Move drm_gem_fb_prepare_fb() to GEM atomic helpersThomas Zimmermann41-145/+176
The function drm_gem_fb_prepare_fb() is a helper for atomic modesetting, but currently located next to framebuffer helpers. Move it to GEM atomic helpers, rename it slightly and adopt the drivers. Same for the rsp simple-pipe helper. Compile-tested with x86-64, aarch64 and arm. The patch is fairly large, but there are no functional changes. v3: * remove out-comented line in drm_gem_framebuffer_helper.h (Maxime) v2: * rename to drm_gem_plane_helper_prepare_fb() (Daniel) * add tutorial-style documentation Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210222141756.7864-1-tzimmermann@suse.de
2021-02-22drm/ast: fix memory leak when unload the driverTong Zhang1-0/+2
a connector is leaked upon module unload, it seems that we should do similar to sample driver as suggested in drm_drv.c. Adding drm_atomic_helper_shutdown() in ast_pci_remove to prevent leaking. [ 153.822134] WARNING: CPU: 0 PID: 173 at drivers/gpu/drm/drm_mode_config.c:504 drm_mode_config_cle0 [ 153.822698] Modules linked in: ast(-) drm_vram_helper drm_ttm_helper ttm [last unloaded: ttm] [ 153.823197] CPU: 0 PID: 173 Comm: modprobe Tainted: G W 5.11.0-03615-g55f62bc873474 [ 153.823708] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-48-gd9c812dda519-4 [ 153.824333] RIP: 0010:drm_mode_config_cleanup+0x418/0x470 [ 153.824637] Code: 0c 00 00 00 00 48 8b 84 24 a8 00 00 00 65 48 33 04 25 28 00 00 00 75 65 48 81 c0 [ 153.825668] RSP: 0018:ffff888103c9fb70 EFLAGS: 00010212 [ 153.825962] RAX: ffff888102b0d100 RBX: ffff888102b0c298 RCX: ffffffff818d8b2b [ 153.826356] RDX: dffffc0000000000 RSI: 000000007fffffff RDI: ffff888102b0c298 [ 153.826748] RBP: ffff888103c9fba0 R08: 0000000000000001 R09: ffffed1020561857 [ 153.827146] R10: ffff888102b0c2b7 R11: ffffed1020561856 R12: ffff888102b0c000 [ 153.827538] R13: ffff888102b0c2d8 R14: ffff888102b0c2d8 R15: 1ffff11020793f70 [ 153.827935] FS: 00007f24bff456a0(0000) GS:ffff88815b400000(0000) knlGS:0000000000000000 [ 153.828380] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 153.828697] CR2: 0000000001c39018 CR3: 0000000103c90000 CR4: 00000000000006f0 [ 153.829096] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 153.829486] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 153.829883] Call Trace: [ 153.830024] ? drmm_mode_config_init+0x930/0x930 [ 153.830281] ? cpumask_next+0x16/0x20 [ 153.830488] ? mnt_get_count+0x66/0x80 [ 153.830699] ? drm_mode_config_cleanup+0x470/0x470 [ 153.830972] drm_managed_release+0xed/0x1c0 [ 153.831208] drm_dev_release+0x3a/0x50 [ 153.831420] release_nodes+0x39e/0x410 [ 153.831631] ? devres_release+0x40/0x40 [ 153.831852] device_release_driver_internal+0x158/0x270 [ 153.832143] driver_detach+0x76/0xe0 [ 153.832344] bus_remove_driver+0x7e/0x100 [ 153.832568] pci_unregister_driver+0x28/0xf0 [ 153.832821] __x64_sys_delete_module+0x268/0x300 [ 153.833086] ? __ia32_sys_delete_module+0x300/0x300 [ 153.833357] ? call_rcu+0x372/0x4f0 [ 153.833553] ? fpregs_assert_state_consistent+0x4d/0x60 [ 153.833840] ? exit_to_user_mode_prepare+0x2f/0x130 [ 153.834118] do_syscall_64+0x33/0x40 [ 153.834317] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 153.834597] RIP: 0033:0x7f24bfec7cf7 [ 153.834797] Code: 48 89 57 30 48 8b 04 24 48 89 47 38 e9 1d a0 02 00 48 89 f8 48 89 f7 48 89 d6 41 [ 153.835812] RSP: 002b:00007fff72e6cb58 EFLAGS: 00000202 ORIG_RAX: 00000000000000b0 [ 153.836234] RAX: ffffffffffffffda RBX: 00007f24bff45690 RCX: 00007f24bfec7cf7 [ 153.836623] RDX: 00000000ffffffff RSI: 0000000000000080 RDI: 0000000001c2fb10 [ 153.837018] RBP: 0000000001c2fac0 R08: 2f2f2f2f2f2f2f2f R09: 0000000001c2fac0 [ 153.837408] R10: fefefefefefefeff R11: 0000000000000202 R12: 0000000001c2fac0 [ 153.837798] R13: 0000000001c2f9d0 R14: 0000000000000000 R15: 0000000000000001 [ 153.838194] ---[ end trace b92031513bbe596c ]--- [ 153.838441] [drm:drm_mode_config_cleanup] *ERROR* connector VGA-1 leaked! Signed-off-by: Tong Zhang <ztong0001@gmail.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210222023322.984885-1-ztong0001@gmail.com
2021-02-22efifb: Ensure graphics device for efifb stays at PCI D0Kai-Heng Feng1-0/+3
We are seeing root ports on some desktop boards support D3cold for discrete graphics card. So when efifb is in use while graphics device isn't bound to a driver, PCI and ACPI will put the graphics to D3cold when runtime suspend kicks in, makes efifb stop working. So ensure the graphics device won't be runtime suspended, to keep efifb work all the time. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210129084327.986630-1-kai.heng.feng@canonical.com
2021-02-21drm/drv: Remove initialization of static variablesTian Tao1-1/+1
Address the following checkpatch errors: ERROR: do not initialise statics to false Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/1613701811-32037-1-git-send-email-tiantao6@hisilicon.com
2021-02-19drm/qxl: add lock asserts to qxl_bo_vmap_locked + qxl_bo_vunmap_lockedGerd Hoffmann1-0/+4
Try avoid re-introducing locking bugs. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: http://patchwork.freedesktop.org/patch/msgid/20210217123213.2199186-12-kraxel@redhat.com
2021-02-19drm/qxl: rework cursor planeGerd Hoffmann1-115/+133
Add helper functions to create and move the cursor. Create the cursor_bo in prepare_fb callback, in the atomic_commit callback we only send the update command to the host. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: http://patchwork.freedesktop.org/patch/msgid/20210217123213.2199186-11-kraxel@redhat.com
2021-02-19drm/qxl: move shadow handling to new qxl_prepare_shadow()Gerd Hoffmann1-27/+34
Pure code motion, no functional change. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: http://patchwork.freedesktop.org/patch/msgid/20210217123213.2199186-10-kraxel@redhat.com
2021-02-19drm/qxl: fix monitors object vmapGerd Hoffmann1-5/+2
Use the correct vmap variant. We don't hold a reservation here, so we can't use the _locked variant. We can drop the pin because qxl_bo_vmap will do that for us. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: http://patchwork.freedesktop.org/patch/msgid/20210217123213.2199186-9-kraxel@redhat.com
2021-02-19drm/qxl: fix prime vmapGerd Hoffmann1-2/+2
Use the correct vmap variant. We don't have a reservation here, so we can't use the _locked version. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: http://patchwork.freedesktop.org/patch/msgid/20210217123213.2199186-8-kraxel@redhat.com
2021-02-19drm/qxl: add qxl_bo_vmap/qxl_bo_vunmapGerd Hoffmann2-0/+38
Add vmap/vunmap variants which reserve (and pin) the bo. They can be used in case the caller doesn't hold a reservation for the bo. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: http://patchwork.freedesktop.org/patch/msgid/20210217123213.2199186-7-kraxel@redhat.com
2021-02-19drm/qxl: rename qxl_bo_kmap -> qxl_bo_vmap_lockedGerd Hoffmann6-20/+20
Append _locked to Make clear that these functions should be called with reserved bo's only. While being at it also rename kmap -> vmap. No functional change. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: http://patchwork.freedesktop.org/patch/msgid/20210217123213.2199186-6-kraxel@redhat.com
2021-02-19drm/qxl: fix lockdep issue in qxl_alloc_release_reservedGerd Hoffmann1-3/+10
Call qxl_bo_unpin (which does a reservation) without holding the release_mutex lock. Fixes lockdep (correctly) warning on a possible deadlock. Fixes: 65ffea3c6e73 ("drm/qxl: unpin release objects") Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: http://patchwork.freedesktop.org/patch/msgid/20210217123213.2199186-5-kraxel@redhat.com
2021-02-19drm/qxl: use ttm bo prioritiesGerd Hoffmann6-12/+20
Allow to set priorities for buffer objects. Use priority 1 for surface and cursor command releases. Use priority 0 for drawing command releases. That way the short-living drawing commands are first in line when it comes to eviction, making it *much* less likely that ttm_bo_mem_force_space() picks something which can't be evicted and throws an error after waiting a while without success. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: http://patchwork.freedesktop.org/patch/msgid/20210217123213.2199186-4-kraxel@redhat.com
2021-02-19drm/qxl: more fence wait reworkGerd Hoffmann1-6/+2
Move qxl_io_notify_oom() call into wait condition. That way the driver will call it again if one call wasn't enough. Also allows to remove the extra dma_fence_is_signaled() check and the goto. Fixes: 5a838e5d5825 ("drm/qxl: simplify qxl_fence_wait") Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: http://patchwork.freedesktop.org/patch/msgid/20210217123213.2199186-3-kraxel@redhat.com
2021-02-19drm/qxl: properly handle device init failuresGerd Hoffmann2-0/+7
Specifically do not try release resources which where not allocated in the first place. Cc: Tong Zhang <ztong0001@gmail.com> Tested-by: Tong Zhang <ztong0001@gmail.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Link: http://patchwork.freedesktop.org/patch/msgid/20210217123213.2199186-2-kraxel@redhat.com
2021-02-18drm/tilcdc: fix raster control register settingDario Binacchi1-1/+1
The fdd property of the tilcdc_panel_info structure must set the reqdly bit field (bit 12 to 19) of the raster control register. The previous statement set the least significant bit instead. Signed-off-by: Dario Binacchi <dariobin@libero.it> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Jyri Sarha <jyri.sarha@iki.fi> Tested-by: Jyri Sarha <jyri.sarha@iki.fi> Signed-off-by: Jyri Sarha <jyri.sarha@iki.fi> Link: https://patchwork.freedesktop.org/patch/msgid/20210216202225.12861-1-dariobin@libero.it
2021-02-18drm/tilcdc: replace spin_lock_irqsave by spin_lock in hard IRQTian Tao1-5/+4
The code has been in a irq-disabled context since it is hard IRQ. There is no necessity to do it again. Signed-off-by: Tian Tao <tiantao6@hisilicon.com> Reviewed-by: Jyri Sarha <jyri.sarha@iki.fi> Tested-by: Jyri Sarha <jyri.sarha@iki.fi> Signed-off-by: Jyri Sarha <jyri.sarha@iki.fi> Link: https://patchwork.freedesktop.org/patch/msgid/1612751576-42512-1-git-send-email-tiantao6@hisilicon.com
2021-02-18drm/dp_mst: Tune down the WARN modesetting a port with full_pbn=0Imre Deak1-3/+8
It's possible to modeset a connector/mst port that has a 0 full_pbn value: if the sink on the port deasserts its HPD and a branch device reports this via a CSN with the port's ddps=0 and pdt!=NONE the driver clears full_pbn, but the corresponding connector can be still modesetted. This happened on a DELL U2719D monitor as the branch device and an LG 27UL650-W daisy-chained to it, the LG monitor generating a long HPD pulse (doing this for some reason always when waking up from some power saving state). Tune down the WARN about this scenario to a debug message. v2: Use the correct atomic debug message level. (Lyude) References: https://gitlab.freedesktop.org/drm/intel/-/issues/1917 Cc: Lyude Paul <lyude@redhat.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210216123448.410545-1-imre.deak@intel.com
2021-02-18video: fbdev: amba-clcd: Always use msleep() for waitingSebastian Andrzej Siewior1-15/+2
The driver uses in_atomic() to distinguish between mdelay() and msleep(). The usage of in_interrupt() in drivers is phased out and Linus clearly requested that code which changes behaviour depending on context should either be separated or the context be conveyed in an argument passed by the caller, which usually knows the context. I traced the usage of in_interrupt() back to its initial merge: bfe694f833643 ("[ARM] Add ARM AMBA CLCD framebuffer driver.") https://git.kernel.org/history/history/c/bfe694f833643 The driver has been removed and added back in the meantime. I've been looking for the IRQ context as described in the comment and couldn't find it. The functions calling clcdfb_sleep() also call conditionally backlight_update_status() which acquires a mutex. If it is okay to acquire a mutex then it is okay to use msleep() since both functions must be used in preemptible context. Replace clcdfb_sleep() with msleep(). Cc: Peter Collingbourne <pcc@google.com> Cc: Russell King <linux@armlinux.org.uk> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210208223810.388502-4-bigeasy@linutronix.de
2021-02-18video: omapfb: Remove WARN_ON(in_interrupt()).Ahmed S. Darwish1-2/+0
dsi_sync_vc() uses in_interrupt() to create a warning if the function is used in non-preemptible context. The usage of in_interrupt() in drivers is phased out and Linus clearly requested that code which changes behaviour depending on context should either be separated or the context be conveyed in an argument passed by the caller, which usually knows the context. The wait_for_completion() function (used in dsi_sync_vc_vp() and dsi_sync_vc_l4() has already a check if it is invoked from proper context. Remove WARN_ON(in_interrupt()) from the driver. Cc: linux-omap@vger.kernel.org Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210208223810.388502-3-bigeasy@linutronix.de
2021-02-18video: omap: Remove in_interrupt() usage.Ahmed S. Darwish1-14/+28
alloc_req() uses in_interrupt() to detect if it is safe to use down(). The usage of in_interrupt() in drivers is phased out and Linus clearly requested that code which changes behaviour depending on context should either be separated or the context be conveyed in an argument passed by the caller, which usually knows the context. The semaphore is used as a counting semaphore, initialized with the number of slots in the request pool minus IRQ_REQ_POOL_SIZE - which are reserved for the in_interrupt() user to ensure that a request is always available. The preemptible user will block on the semphore waiting for a request to become available in case there are no requests available. Replace in_interrupt() with a `can_sleep' argument to indicate if it is safe to block on the sempahore. Cc: linux-omap@vger.kernel.org Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210208223810.388502-2-bigeasy@linutronix.de
2021-02-17drm: Switch to %p4cc format modifierSakari Ailus25-137/+69
Switch DRM drivers from drm_get_format_name() to %p4cc. This gets rid of a large number of temporary variables at the same time. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210216155723.17109-4-sakari.ailus@linux.intel.com
2021-02-17v4l: ioctl: Use %p4cc printk modifier to print FourCC codesSakari Ailus1-64/+21
Now that we can print FourCC codes directly using printk, make use of the feature in V4L2 core. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Reviewed-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210216155723.17109-3-sakari.ailus@linux.intel.com
2021-02-17lib/vsprintf: Add support for printing V4L2 and DRM fourccsSakari Ailus4-2/+79
Add a printk modifier %p4cc (for pixel format) for printing V4L2 and DRM pixel formats denoted by fourccs. The fourcc encoding is the same for both so the same implementation can be used. Suggested-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210216155723.17109-2-sakari.ailus@linux.intel.com
2021-02-17drm/ast: Move all of the cursor-update functionality to atomic_updateThomas Zimmermann1-44/+22
We used to update the cursor image in prepare_fb. Move all this code to atomic_update (where it belongs). The generic helper for shadow-buffered planes now implement the cursor plane's prepare_fb. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210209134632.12157-11-tzimmermann@suse.de
2021-02-17drm/ast: Store each HW cursor offset after pinning the rsp BOThomas Zimmermann2-10/+12
As HW cursor BOs never move, we can store the offset in VRAM in the cursor-plane's HWC state. This removes the last possible source of runtime errors from atomic_update. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210209134632.12157-10-tzimmermann@suse.de
2021-02-17drm/ast: Map HW cursor BOs permanentlyThomas Zimmermann2-17/+16
The BOs of the hardware cursor are now mapped permanently while the cursor plane is being used. This reduces the CPU overhead of the cursor plane's atomic_update function. The change also resolves a problem with the vmap call in the commit tail. The vmap implementation could acquire the DMA reservation lock on the BO, which is not allowed that late in the atomic update. Removing the vmap call from atomic_update fixes the issue. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210209134632.12157-9-tzimmermann@suse.de
2021-02-17drm/ast: Store cursor BOs in cursor planeThomas Zimmermann2-17/+21
The cursor uses two BOs in video RAM to implement double buffering. Store both in struct ast_cursor_plane. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210209134632.12157-8-tzimmermann@suse.de
2021-02-17drm/ast: Add cursor-plane data structureThomas Zimmermann2-3/+25
Cursor state is currently located throughout struct ast_private. Having struct ast_cursor_plane as dedicated data structure for cursors helps to organize the modesetting code. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210209134632.12157-7-tzimmermann@suse.de
2021-02-17drm/ast: Inline ast cursor-update functions into modesetting codeThomas Zimmermann4-257/+181
The logic for cursor updates is now located in the cursor plane's modesetting code. A number of helper functions remain to modify the rsp registers and image. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210209134632.12157-6-tzimmermann@suse.de
2021-02-17drm/ast: Allocate HW cursor BOs during cursor-plane initializationThomas Zimmermann3-66/+55
The BOs are eventually released by the cursor plane's destroy callback. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210209134632.12157-5-tzimmermann@suse.de
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-05 07:07:02 +0000