summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2016-12-08ser_gigaset: return -ENOMEM on error instead of successDan Carpenter1-1/+3
If we can't allocate the resources in gigaset_initdriver() then we should return -ENOMEM instead of zero. Fixes: 2869b23e4b95 ("[PATCH] drivers/isdn/gigaset: new M101 driver (v2)") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-08NET: usb: cdc_mbim: add quirk for supporting Telit LE922ADaniele Palmas3-6/+32
Telit LE922A MBIM based composition does not work properly with altsetting toggle done in cdc_ncm_bind_common. This patch adds CDC_MBIM_FLAG_AVOID_ALTSETTING_TOGGLE quirk to avoid this procedure that, instead, is mandatory for other modems. Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Reviewed-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-07phy: Don't increment MDIO bus refcount unless it's a different ownerFlorian Fainelli1-3/+13
Commit 3e3aaf649416 ("phy: fix mdiobus module safety") fixed the way we dealt with MDIO bus module reference count, but sort of introduced a regression in that, if an Ethernet driver registers its own MDIO bus driver, as is common, we will end up with the Ethernet driver's module->refnct set to 1, thus preventing this driver from any removal. Fix this by comparing the network device's device driver owner against the MDIO bus driver owner, and only if they are different, increment the MDIO bus module refcount. Fixes: 3e3aaf649416 ("phy: fix mdiobus module safety") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-07netvsc: reduce maximum GSO sizestephen hemminger1-0/+5
Hyper-V (and Azure) support using NVGRE which requires some extra space for encapsulation headers. Because of this the largest allowed TSO packet is reduced. For older releases, hard code a fixed reduced value. For next release, there is a better solution which uses result of host offload negotiation. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-07drivers: net: cpsw-phy-sel: Clear RGMII_IDMODE on "rgmii" linksAlex1-0/+1
Support for setting the RGMII_IDMODE bit was added in the commit referenced below. However, that commit did not add the symmetrical clearing of the bit by way of setting it in "mask". Add it here. Note that the documentation marks clearing this bit as "reserved", however, according to TI, support for delaying the clock does exist in the MAC, although it is not officially supported. We tested this on a board with an RGMII to RGMII link that will not work unless this bit is cleared. Fixes: 0fb26c3063ea ("drivers: net: cpsw-phy-sel: add support to configure rgmii internal delay") Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-07Merge tag 'linux-can-fixes-for-4.9-20161207' of ↵David S. Miller2-0/+4
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2016-12-07 Andrey Konovalov triggered a warning in the CAN RAW layer, which is fixed by a patch by me. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-07can: raw: raw_setsockopt: limit number of can_filter that can be setMarc Kleine-Budde2-0/+4
This patch adds a check to limit the number of can_filters that can be set via setsockopt on CAN_RAW sockets. Otherwise allocations > MAX_ORDER are not prevented resulting in a warning. Reference: https://lkml.org/lkml/2016/12/2/230 Reported-by: Andrey Konovalov <andreyknvl@google.com> Tested-by: Andrey Konovalov <andreyknvl@google.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2016-12-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds1-1/+2
Pull sparc fix from David Miller: "A use-before-NULL-check from Dan Carpenter" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: dbri: move dereference after check for NULL
2016-12-06dbri: move dereference after check for NULLDan Carpenter1-1/+2
We accidentally introduced a dereference before the NULL check in xmit_descs() as part of silencing a GCC warning. Fixes: 16f46050e709 ("dbri: Fix compiler warning") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds36-117/+194
Pull networking fixes from David Miller: 1) When dcbnl_cee_fill() fails to be able to push a new netlink attribute, it return 0 instead of an error code. From Pan Bian. 2) Two suffix handling fixes to FIB trie code, from Alexander Duyck. 3) bnxt_hwrm_stat_ctx_alloc() goes through all the trouble of setting and maintaining a return code 'rc' but fails to actually return it. Also from Pan Bian. 4) ping socket ICMP handler needs to validate ICMP header length, from Kees Cook. 5) caif_sktinit_module() has this interesting logic: int err = sock_register(...); if (!err) return err; return 0; Just return sock_register()'s return value directly which is the only possible correct thing to do. 6) Two bnx2x driver fixes from Yuval Mintz, return a reasonable estimate from get_ringparam() ethtool op when interface is down and avoid trying to use UDP port based tunneling on 577xx chips. 7) Fix ep93xx_eth crash on module unload from Florian Fainelli. 8) Missing uapi exports, from Stephen Hemminger. 9) Don't schedule work from sk_destruct(), because the socket will be freed upon return from that function. From Herbert Xu. 10) Buggy drivers, of which we know there is at least one, can send a huge packet into the TCP stack but forget to set the gso_size in the SKB, which causes all kinds of problems. Correct this when it happens, and emit a one-time warning with the device name included so that it can be diagnosed more easily. From Marcelo Ricardo Leitner. 11) virtio-net does DMA off the stack causes hiccups with VMAP_STACK, fix from Andy Lutomirski. 12) Fix fec driver compilation with CONFIG_M5272, from Nikita Yushchenko. 13) mlx5 fixes from Kamal Heib, Saeed Mahameed, and Mohamad Haj Yahia. (erroneously flushing queues on error, module parameter validation, etc) * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (34 commits) net/mlx5e: Change the SQ/RQ operational state to positive logic net/mlx5e: Don't flush SQ on error net/mlx5e: Don't notify HW when filling the edge of ICO SQ net/mlx5: Fix query ISSI flow net/mlx5: Remove duplicate pci dev name print net/mlx5: Verify module parameters net: fec: fix compile with CONFIG_M5272 be2net: Add DEVSEC privilege to SET_HSW_CONFIG command. virtio-net: Fix DMA-from-the-stack in virtnet_set_mac_address() tcp: warn on bogus MSS and try to amend it uapi glibc compat: fix outer guard of net device flags enum net: stmmac: clear reset value of snps, wr_osr_lmt/snps, rd_osr_lmt before writing netlink: Do not schedule work from sk_destruct uapi: export nf_log.h uapi: export tc_skbmod.h net: ep93xx_eth: Do not crash unloading module bnx2x: Prevent tunnel config for 577xx bnx2x: Correct ringparam estimate when DOWN isdn: hisax: set error code on failure net: bnx2x: fix improper return value ...
2016-12-06shmem: fix shm fallocate() list corruptionLinus Torvalds1-1/+14
The shmem hole punching with fallocate(FALLOC_FL_PUNCH_HOLE) does not want to race with generating new pages by faulting them in. However, the wait-queue used to delay the page faulting has a serious problem: the wait queue head (in shmem_fallocate()) is allocated on the stack, and the code expects that "wake_up_all()" will make sure that all the queue entries are gone before the stack frame is de-allocated. And that is not at all necessarily the case. Yes, a normal wake-up sequence will remove the wait-queue entry that caused the wakeup (see "autoremove_wake_function()"), but the key wording there is "that caused the wakeup". When there are multiple possible wakeup sources, the wait queue entry may well stay around. And _particularly_ in a page fault path, we may be faulting in new pages from user space while we also have other things going on, and there may well be other pending wakeups. So despite the "wake_up_all()", it's not at all guaranteed that all list entries are removed from the wait queue head on the stack. Fix this by introducing a new wakeup function that removes the list entry unconditionally, even if the target process had already woken up for other reasons. Use that "synchronous" function to set up the waiters in shmem_fault(). This problem has never been seen in the wild afaik, but Dave Jones has reported it on and off while running trinity. We thought we fixed the stack corruption with the blk-mq rq_list locking fix (commit 7fe311302f7d: "blk-mq: update hardware and software queues for sleeping alloc"), but it turns out there was _another_ stack corruptor hiding in the trinity runs. Vegard Nossum (also running trinity) was able to trigger this one fairly consistently, and made us look once again at the shmem code due to the faults often being in that area. Reported-and-tested-by: Vegard Nossum <vegard.nossum@oracle.com>. Reported-by: Dave Jones <davej@codemonkey.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-06Merge branch 'mlx5-fixes'David S. Miller8-42/+53
Saeed Mahameed says: ==================== Mellanox 100G mlx5 fixes 2016-12-04 Some bug fixes for mlx5 core and mlx5e driver. v1->v2: - replace "uint" with "unsigned int" ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-06net/mlx5e: Change the SQ/RQ operational state to positive logicMohamad Haj Yahia5-13/+17
When using the negative logic (i.e. FLUSH state), after the RQ/SQ reopen we will have a time interval that the RQ/SQ is not really ready and the state indicates that its not in FLUSH state because the initial SQ/RQ struct memory starts as zeros. Now we changed the state to indicate if the SQ/RQ is opened and we will set the READY state after finishing preparing all the SQ/RQ resources. Fixes: 6e8dd6d6f4bd ("net/mlx5e: Don't wait for SQ completions on close") Fixes: f2fde18c52a7 ("net/mlx5e: Don't wait for RQ completions on close") Signed-off-by: Mohamad Haj Yahia <mohamad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-06net/mlx5e: Don't flush SQ on errorSaeed Mahameed1-1/+0
We are doing SQ descriptors cleanup in driver. Fixes: 6e8dd6d6f4bd ("net/mlx5e: Don't wait for SQ completions on close") Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-06net/mlx5e: Don't notify HW when filling the edge of ICO SQSaeed Mahameed1-1/+1
We are going to do this a couple of steps ahead anyway. Fixes: d3c9bc2743dc ("net/mlx5e: Added ICO SQs") Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-06net/mlx5: Fix query ISSI flowKamal Heib3-11/+14
In old FWs query ISSI command is not supported and for some of those FWs it might fail with status other than "MLX5_CMD_STAT_BAD_OP_ERR". In such case instead of failing the driver load, we will treat any FW status other than 0 for Query ISSI FW command as ISSI not supported and assume ISSI=0 (most basic driver/FW interface). In case of driver syndrom (query ISSI failure by driver) we will fail driver load. Fixes: f62b8bb8f2d3 ('net/mlx5: Extend mlx5_core to support ConnectX-4 Ethernet functionality') Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-06net/mlx5: Remove duplicate pci dev name printKamal Heib1-4/+4
Remove duplicate pci dev name printing from mlx5_core_warn/dbg. Fixes: 5a7883989b1c ('net/mlx5_core: Improve mlx5 messages') Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-06net/mlx5: Verify module parametersKamal Heib2-12/+17
Verify the mlx5_core module parameters by making sure that they are in the expected range and if they aren't restore them to their default values. Fixes: 9603b61de1ee ('mlx5: Move pci device handling from mlx5_ib to mlx5_core') Signed-off-by: Kamal Heib <kamalh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-06net: fec: fix compile with CONFIG_M5272Nikita Yushchenko1-3/+10
Commit 80cca775cdc4 ("net: fec: cache statistics while device is down") introduced unconditional statistics-related actions. However, when driver is compiled with CONFIG_M5272, staticsics-related definitions do not exist, which results into build errors. Fix that by adding explicit handling of !defined(CONFIG_M5272) case. Fixes: 80cca775cdc4 ("net: fec: cache statistics while device is down") Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-06be2net: Add DEVSEC privilege to SET_HSW_CONFIG command.Venkat Duvvuru1-1/+2
OPCODE_COMMON_GET_FN_PRIVILEGES is returning only DEVSEC privilege (Unrestricted Administrative Privilege) for Lancer NIC functions. So, driver is failing SET_HSW_CONFIG command, as DEVSEC privilege was not set in the privilege bitmap. This patch fixes the problem by setting DEVSEC privilege in SET_HSW_CONFIG’s privilege bitmap. Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com> Signed-off-by: Suresh Reddy <suresh.reddy@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-06virtio-net: Fix DMA-from-the-stack in virtnet_set_mac_address()Andy Lutomirski1-5/+14
With CONFIG_VMAP_STACK=y, virtnet_set_mac_address() can be passed a pointer to the stack and it will OOPS. Copy the address to the heap to prevent the crash. Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Laura Abbott <labbott@redhat.com> Reported-by: zbyszek@in.waw.pl Signed-off-by: Andy Lutomirski <luto@kernel.org> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-06tcp: warn on bogus MSS and try to amend itMarcelo Ricardo Leitner1-1/+21
There have been some reports lately about TCP connection stalls caused by NIC drivers that aren't setting gso_size on aggregated packets on rx path. This causes TCP to assume that the MSS is actually the size of the aggregated packet, which is invalid. Although the proper fix is to be done at each driver, it's often hard and cumbersome for one to debug, come to such root cause and report/fix it. This patch amends this situation in two ways. First, it adds a warning on when this situation occurs, so it gives a hint to those trying to debug this. It also limit the maximum probed MSS to the adverised MSS, as it should never be any higher than that. The result is that the connection may not have the best performance ever but it shouldn't stall, and the admin will have a hint on what to look for. Tested with virtio by forcing gso_size to 0. v2: updated msg per David's suggestion v3: use skb_iif to find the interface and also log its name, per Eric Dumazet's suggestion. As the skb may be backlogged and the interface gone by then, we need to check if the number still has a meaning. v4: use helper tcp_gro_dev_warn() and avoid pr_warn_once inside __once, per David's suggestion Cc: Jonathan Maxwell <jmaxwell37@gmail.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-06uapi glibc compat: fix outer guard of net device flags enumJonas Gorski1-2/+2
Fix a wrong condition preventing the higher net device flags IFF_LOWER_UP etc to be defined if net/if.h is included before linux/if.h. The comment makes it clear the intention was to allow partial definition with either parts. This fixes compilation of userspace programs trying to use IFF_LOWER_UP, IFF_DORMANT or IFF_ECHO. Fixes: 4a91cb61bb99 ("uapi glibc compat: fix compile errors when glibc net/if.h included before linux/if.h") Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Reviewed-by: Mikko Rapeli <mikko.rapeli@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-06net: stmmac: clear reset value of snps, wr_osr_lmt/snps, rd_osr_lmt before ↵Niklas Cassel3-2/+8
writing WR_OSR_LMT and RD_OSR_LMT have a reset value of 1. Since the reset value wasn't cleared before writing, the value in the register would be incorrect if specifying an uneven value for snps,wr_osr_lmt/snps,rd_osr_lmt. Zero is a valid value for the properties, since the databook specifies: maximum outstanding requests = WR_OSR_LMT + 1. We do not want to change the behavior for existing users when the property is missing. Therefore, default to 1 if the property is missing, since that is the same as the reset value. Signed-off-by: Niklas Cassel <niklas.cassel@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-05netlink: Do not schedule work from sk_destructHerbert Xu1-17/+15
It is wrong to schedule a work from sk_destruct using the socket as the memory reserve because the socket will be freed immediately after the return from sk_destruct. Instead we should do the deferral prior to sk_free. This patch does just that. Fixes: 707693c8a498 ("netlink: Call cb->done from a worker thread") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Tested-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-05uapi: export nf_log.hstephen hemminger1-0/+1
File is in uapi directory but not being copied on make install_headers Fixes commit 4ec9c8fbbc22 ("netfilter: nft_log: complete NFTA_LOG_FLAGS attr support"). Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-05uapi: export tc_skbmod.hstephen hemminger1-0/+1
Fixes commit 735cffe5d800 ("net_sched: Introduce skbmod action") Not used by iproute2 but maybe in future. Signed-off-by: Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-05net: ep93xx_eth: Do not crash unloading moduleFlorian Fainelli1-0/+4
When we unload the ep93xx_eth, whether we have opened the network interface or not, we will either hit a kernel paging request error, or a simple NULL pointer de-reference because: - if ep93xx_open has been called, we have created a valid DMA mapping for ep->descs, when we call ep93xx_stop, we also call ep93xx_free_buffers, ep->descs now has a stale value - if ep93xx_open has not been called, we have a NULL pointer for ep->descs, so performing any operation against that address just won't work Fix this by adding a NULL pointer check for ep->descs which means that ep93xx_free_buffers() was able to successfully tear down the descriptors and free the DMA cookie as well. Fixes: 1d22e05df818 ("[PATCH] Cirrus Logic ep93xx ethernet driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-05Merge branch 'bnx2x-fixes'David S. Miller2-2/+10
Yuval Mintz says: ==================== bnx2x: fixes series Two unrelated fixes for bnx2x - the first one is nice-to-have, while the other fixes fatal behaviour in older adapters. Please consider applying them to `net'. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-05bnx2x: Prevent tunnel config for 577xxMintz, Yuval1-2/+2
Only the 578xx adapters are capable of configuring UDP ports for the purpose of tunnelling - doing the same on 577xx might lead to a firmware assertion. We're already not claiming support for any related feature for such devices, but we also need to prevent the configuration of the UDP ports to the device in this case. Fixes: f34fa14cc033 ("bnx2x: Add vxlan RSS support") Reported-by: Anikina Anna <anikina@gmail.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-05bnx2x: Correct ringparam estimate when DOWNMintz, Yuval1-0/+8
Until interface is up [and assuming ringparams weren't explicitly configured] when queried for the size of its rings bnx2x would claim they're the maximal size by default. That is incorrect as by default the maximal number of buffers would be equally divided between the various rx rings. This prevents the user from actually setting the number of elements on each rx ring to be of maximal size prior to transitioning the interface into up state. To fix this, make a rough estimation about the number of buffers. It wouldn't always be accurate, but it would be much better than current estimation and would allow users to increase number of buffers during early initialization of the interface. Reported-by: Seymour, Shane <shane.seymour@hpe.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-05isdn: hisax: set error code on failurePan Bian1-0/+1
In function hfc4s8s_probe(), the value of return variable err should be negative on failures. However, when the call to request_region() returns NULL, the value of err is 0. This patch fixes the bug, assigning "-EBUSY" to err on the path that request_region() fails. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=188931 Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-05net: bnx2x: fix improper return valuePan Bian1-0/+1
Macro BNX2X_ALLOC_AND_SET(arr, lbl, func) calls kmalloc() to allocate memory, and jumps to label "lbl" if the allocation fails. Label "lbl" first cleans memory and then returns variable rc. Before calling the macro, the value of variable rc is 0. Because 0 means no error, the callers of bnx2x_init_firmware() may be misled. This patch fixes the bug, assigning "-ENOMEM" to rc before calling macro NX2X_ALLOC_AND_SET(). Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=189141 Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-05net: ethernet: qlogic: set error code on failurePan Bian1-0/+1
When calling dma_mapping_error(), the value of return variable rc is 0. And when the call returns an unexpected value, rc is not set to a negative errno. Thus, it will return 0 on the error path, and its callers cannot detect the bug. This patch fixes the bug, assigning "-ENOMEM" to err. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=189041 Signed-off-by: Pan Bian <bianpan2016@163.com> Acked-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-05atm: fix improper return valuePan Bian1-1/+1
It returns variable "error" when ioremap_nocache() returns a NULL pointer. The value of "error" is 0 then, which will mislead the callers to believe that there is no error. This patch fixes the bug, returning "-ENOMEM". Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=189021 Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-05net: irda: set error code on failuresPan Bian1-0/+1
When the calls to kzalloc() fail, the value of return variable ret may be 0. 0 means success in this context. This patch fixes the bug, assigning "-ENOMEM" to ret before calling kzalloc(). Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=188971 Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-05net: caif: remove ineffective checkPan Bian1-4/+1
The check of the return value of sock_register() is ineffective. "if(!err)" seems to be a typo. It is better to propagate the error code to the callers of caif_sktinit_module(). This patch removes the check statment and directly returns the result of sock_register(). Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=188751 Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-05net: ping: check minimum size on ICMP header lengthKees Cook1-0/+4
Prior to commit c0371da6047a ("put iov_iter into msghdr") in v3.19, there was no check that the iovec contained enough bytes for an ICMP header, and the read loop would walk across neighboring stack contents. Since the iov_iter conversion, bad arguments are noticed, but the returned error is EFAULT. Returning EINVAL is a clearer error and also solves the problem prior to v3.19. This was found using trinity with KASAN on v3.18: BUG: KASAN: stack-out-of-bounds in memcpy_fromiovec+0x60/0x114 at addr ffffffc071077da0 Read of size 8 by task trinity-c2/9623 page:ffffffbe034b9a08 count:0 mapcount:0 mapping: (null) index:0x0 flags: 0x0() page dumped because: kasan: bad access detected CPU: 0 PID: 9623 Comm: trinity-c2 Tainted: G BU 3.18.0-dirty #15 Hardware name: Google Tegra210 Smaug Rev 1,3+ (DT) Call trace: [<ffffffc000209c98>] dump_backtrace+0x0/0x1ac arch/arm64/kernel/traps.c:90 [<ffffffc000209e54>] show_stack+0x10/0x1c arch/arm64/kernel/traps.c:171 [< inline >] __dump_stack lib/dump_stack.c:15 [<ffffffc000f18dc4>] dump_stack+0x7c/0xd0 lib/dump_stack.c:50 [< inline >] print_address_description mm/kasan/report.c:147 [< inline >] kasan_report_error mm/kasan/report.c:236 [<ffffffc000373dcc>] kasan_report+0x380/0x4b8 mm/kasan/report.c:259 [< inline >] check_memory_region mm/kasan/kasan.c:264 [<ffffffc00037352c>] __asan_load8+0x20/0x70 mm/kasan/kasan.c:507 [<ffffffc0005b9624>] memcpy_fromiovec+0x5c/0x114 lib/iovec.c:15 [< inline >] memcpy_from_msg include/linux/skbuff.h:2667 [<ffffffc000ddeba0>] ping_common_sendmsg+0x50/0x108 net/ipv4/ping.c:674 [<ffffffc000dded30>] ping_v4_sendmsg+0xd8/0x698 net/ipv4/ping.c:714 [<ffffffc000dc91dc>] inet_sendmsg+0xe0/0x12c net/ipv4/af_inet.c:749 [< inline >] __sock_sendmsg_nosec net/socket.c:624 [< inline >] __sock_sendmsg net/socket.c:632 [<ffffffc000cab61c>] sock_sendmsg+0x124/0x164 net/socket.c:643 [< inline >] SYSC_sendto net/socket.c:1797 [<ffffffc000cad270>] SyS_sendto+0x178/0x1d8 net/socket.c:1761 CVE-2016-8399 Reported-by: Qidan He <i@flanker017.me> Fixes: c319b4d76b9e ("net: ipv4: add IPPROTO_ICMP socket kind") Cc: stable@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-05Merge tag 'powerpc-4.9-7' of ↵Linus Torvalds6-6/+18
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "Four fixes, the first for code we merged this cycle and three that are also going to stable: - On 64-bit Book3E we were not placing the .text section where we said we would in the asm. - We broke building the boot wrapper on some 32-bit toolchains. - Lazy icache flushing was broken on pre-POWER5 machines. - One of the error paths in our EEH code would lead to a deadlock. Thanks to: Andrew Donnellan, Ben Hutchings, Benjamin Herrenschmidt, Nicholas Piggin" * tag 'powerpc-4.9-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64: Fix placement of .text to be immediately following .head.text powerpc/eeh: Fix deadlock when PE frozen state can't be cleared powerpc/mm: Fix lazy icache flush on pre-POWER5 powerpc/boot: Fix build failure in 32-bit boot wrapper
2016-12-05atm: lanai: set error code when ioremap failsPan Bian1-0/+1
In function lanai_dev_open(), when the call to ioremap() fails, the value of return variable result is 0. 0 means no error in this context. This patch fixes the bug, assigning "-ENOMEM" to result when ioremap() returns a NULL pointer. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=188791 Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-05net: usb: set error code when usb_alloc_urb failsPan Bian1-0/+1
In function lan78xx_probe(), variable ret takes the errno code on failures. However, when the call to usb_alloc_urb() fails, its value will keeps 0. 0 indicates success in the context, which is inconsistent with the execution result. This patch fixes the bug, assigning "-ENOMEM" to ret when usb_alloc_urb() returns a NULL pointer. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=188771 Signed-off-by: Pan Bian <bianpan2016@163.com> Acked-by: Woojung Huh <woojung.huh@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-05net: bridge: set error code on failurePan Bian1-0/+1
Function br_sysfs_addbr() does not set error code when the call kobject_create_and_add() returns a NULL pointer. It may be better to return "-ENOMEM" when kobject_create_and_add() fails. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=188781 Signed-off-by: Pan Bian <bianpan2016@163.com> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-05net: af_mpls.c add space before open parenthesisSuraj Deshmukh1-1/+1
Adding space after switch keyword before open parenthesis for readability purpose. This patch fixes the checkpatch.pl warning: space required before the open parenthesis '(' Signed-off-by: Suraj Deshmukh <surajssd009005@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-05netdev: broadcom: propagate error codePan Bian1-1/+1
Function bnxt_hwrm_stat_ctx_alloc() always returns 0, even if the call to _hwrm_send_message() fails. It may be better to propagate the errors to the caller of bnxt_hwrm_stat_ctx_alloc(). Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=188661 Signed-off-by: Pan Bian <bianpan2016@163.com> Acked-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-05Merge branch 'fib-suffix-length-fixes'David S. Miller1-33/+35
Alexander Duyck says: ==================== IPv4 FIB suffix length fixes In reviewing the patch from Robert Shearman and looking over the code I realized there were a few different bugs we were still carrying in the IPv4 FIB lookup code. These two patches are based off of Robert's original patch, but take things one step further by splitting them up to address two additional issues I found. So first have Robert's original patch which was addressing the fact that us calling update_suffix in resize is expensive when it is called per add. To address that I incorporated the core bit of the patch which was us dropping the update_suffix call from resize. The first patch in the series does a rename and fix on the push_suffix and pull_suffix code. Specifically we drop the need to pass a leaf and secondly we fix things so we pull the suffix as long as the value of the suffix in the node is dropping. The second patch addresses the original issue reported as well as optimizing the code for the fact that update_suffix is only really meant to go through and clean things up when we are decreasing a suffix. I had originally added code for it to somehow cause an increase, but if we push the suffix when a new leaf is added we only ever have to handle pulling down the suffix with update_suffix so I updated the code to reflect that. As far as side effects the only ones I think that will be obvious should be the fact that some routes may be able to be found earlier since before we relied on resize to update the suffix lengths, and now we are updating them before we add or remove the leaf. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-05ipv4: Drop suffix update from resize codeAlexander Duyck1-21/+21
It has been reported that update_suffix can be expensive when it is called on a large node in which most of the suffix lengths are the same. The time required to add 200K entries had increased from around 3 seconds to almost 49 seconds. In order to address this we need to move the code for updating the suffix out of resize and instead just have it handled in the cases where we are pushing a node that increases the suffix length, or will decrease the suffix length. Fixes: 5405afd1a306 ("fib_trie: Add tracking value for suffix length") Reported-by: Robert Shearman <rshearma@brocade.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Reviewed-by: Robert Shearman <rshearma@brocade.com> Tested-by: Robert Shearman <rshearma@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-05ipv4: Drop leaf from suffix pull/push functionsAlexander Duyck1-12/+14
It wasn't necessary to pass a leaf in when doing the suffix updates so just drop it. Instead just pass the suffix and work with that. Since we dropped the leaf there is no need to include that in the name so the names are updated to node_push_suffix and node_pull_suffix. Finally I noticed that the logic for pulling the suffix length back actually had some issues. Specifically it would stop prematurely if there was a longer suffix, but it was not as long as the original suffix. I updated the code to address that in node_pull_suffix. Fixes: 5405afd1a306 ("fib_trie: Add tracking value for suffix length") Suggested-by: Robert Shearman <rshearma@brocade.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Reviewed-by: Robert Shearman <rshearma@brocade.com> Tested-by: Robert Shearman <rshearma@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-05Merge branch 'linus' of ↵Linus Torvalds4-6/+29
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: "This fixes the following issues: - Intermittent build failure in RSA - Memory corruption in chelsio crypto driver - Regression in DRBG due to vmalloced stack" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: rsa - Add Makefile dependencies to fix parallel builds crypto: chcr - Fix memory corruption crypto: drbg - prevent invalid SG mappings
2016-12-04Linux 4.9-rc8v4.9-rc8Linus Torvalds1-1/+1
2016-12-03net: dcb: set error code on failuresPan Bian1-0/+1
In function dcbnl_cee_fill(), returns the value of variable err on errors. However, on some error paths (e.g. nla put fails), its value may be 0. It may be better to explicitly set a negative errno to variable err before returning. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=188881 Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-18 11:27:30 +0000