summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2021-04-21drm: bridge: add it66121 driverPhong LE3-0/+1030
This commit is a simple driver for bridge HMDI it66121. The input format is RBG and there is no color conversion. Audio, HDCP and CEC are not supported yet. Signed-off-by: Phong LE <ple@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210419071223.2673533-3-narmstrong@baylibre.com
2021-04-21dt-bindings: display: bridge: add it66121 bindingsPhong LE1-0/+124
Add the ITE bridge HDMI it66121 bindings. Signed-off-by: Phong LE <ple@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210419071223.2673533-2-narmstrong@baylibre.com
2021-04-20drm/panel: panel-simple: Use runtime pm to avoid excessive unprepare / prepareDouglas Anderson2-21/+73
Unpreparing and re-preparing a panel can be a really heavy operation. Panels datasheets often specify something on the order of 500ms as the delay you should insert after turning off the panel before turning it on again. In addition, turning on a panel can have delays on the order of 100ms - 200ms before the panel will assert HPD (AKA "panel ready"). The above means that we should avoid turning a panel off if we're going to turn it on again shortly. The above becomes a problem when we want to read the EDID of a panel. The way that ordering works is that userspace wants to read the EDID of the panel _before_ fully enabling it so that it can set the initial mode correctly. However, we can't read the EDID until we power it up. This leads to code that does this dance (like ps8640_bridge_get_edid()): 1. When userspace requests EDID / the panel modes (through an ioctl), we power on the panel just enough to read the EDID and then power it off. 2. Userspace then turns the panel on. There's likely not much time between step #1 and #2 and so we want to avoid powering the panel off and on again between those two steps. Let's use Runtime PM to help us. We'll move the existing prepare() and unprepare() to be runtime resume() and runtime suspend(). Now when we want to prepare() or unprepare() we just increment or decrement the refcount. We'll default to a 1 second autosuspend delay which seems sane given the typical delays we see for panels. A few notes: - It seems the existing unprepare() and prepare() are defined to be no-ops if called extra times. We'll preserve that behavior but may try to remove it in a future patch. - This is a slight change in the ABI of simple panel. If something was absolutely relying on the unprepare() to happen instantly that simply won't be the case anymore. I'm not aware of anyone relying on that behavior, but if there is someone then we'll need to figure out how to enable (or disable) this new delayed behavior selectively. - In order for this to work we now have a hard dependency on "PM". From memory this is a legit thing to assume these days and we don't have to find some fallback to keep working if someone wants to build their system without "PM". Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210416153909.v4.7.I9e8bd33b49c496745bfac58ea9ab418bd3b6f5ce@changeid
2021-04-20drm/bridge: ti-sn65dsi86: Get rid of the useless detect() functionDouglas Anderson1-12/+0
If we just leave the detect() function as NULL then the upper layers assume we're always connected. There's no reason for a stub. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210416153909.v4.6.I826adf4faeb7f39f560b387f6b380e639c6986c8@changeid
2021-04-20drm/bridge: ti-sn65dsi86: Move drm_panel_unprepare() to post_disable()Douglas Anderson1-2/+2
We prepared the panel in pre_enable() so we should unprepare it in post_disable() to match. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210416153909.v4.5.Ia75c9ffe2a2582393a8532d244da86f18b4c9b21@changeid
2021-04-20drm/bridge: ti-sn65dsi86: Reorder remove()Douglas Anderson1-7/+8
Let's make the remove() function strictly the reverse of the probe() function so it's easier to reason about. This patch was created by code inspection and should move us closer to a proper remove. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210416153909.v4.4.Ifcf1deaa372eba7eeb4f8eb516c5d15b77a657a9@changeid
2021-04-20drm/bridge: ti-sn65dsi86: Remove incorrectly tagged kerneldoc commentDouglas Anderson1-1/+1
A random comment inside a function had "/**" in front of it. That doesn't make sense. Remove. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210416153909.v4.3.I167766eeaf4c4646a3934c4dd5332decbab6bd68@changeid
2021-04-20drm/bridge: ti-sn65dsi86: Simplify refclk handlingDouglas Anderson1-8/+3
The clock framework makes it simple to deal with an optional clock. You can call clk_get_optional() and if the clock isn't specified it'll just return NULL without complaint. It's valid to pass NULL to enable/disable/prepare/unprepare. Let's make use of this to simplify things a tiny bit. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Robert Foss <robert.foss@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210416153909.v4.2.Ic9c04f960190faad5290738b2a35d73661862735@changeid
2021-04-20drm/bridge: Fix the stop condition of drm_bridge_chain_pre_enable()Douglas Anderson1-0/+3
The drm_bridge_chain_pre_enable() is not the proper opposite of drm_bridge_chain_post_disable(). It continues along the chain to _before_ the starting bridge. Let's fix that. Fixes: 05193dc38197 ("drm/bridge: Make the bridge chain a double-linked list") Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210416153909.v4.1.If62a003f76a2bc4ccc6c53565becc05d2aad4430@changeid
2021-04-20drm/meson: dw-hdmi: disable DW-HDMI CEC sub-driverNeil Armstrong1-0/+1
On the Amlogic SoCs, the DW-HDMI HW support is here but the DW-HDMI CEC signal is not connected to a physical pin, leading to confusion when the dw-hdmi cec controller can't communicate on the bus. Disable it to avoid exposing a non-functinal bus. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Link: https://patchwork.freedesktop.org/patch/msgid/20210416092737.1971876-3-narmstrong@baylibre.com
2021-04-20drm/bridge/synopsys: dw-hdmi: Add an option to suppress loading CEC driverJernej Skrabec2-1/+3
This adds DW-HDMI driver a glue option to disable loading of the CEC sub-driver. On some SoCs, the CEC functionality is enabled in the IP config bits, but the CEC bus is non-functional like on Amlogic SoCs, where the CEC config bit is set but the DW-HDMI CEC signal is not connected to a physical pin, leading to some confusion when the DW-HDMI CEC controller can't communicate on the bus. Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Link: https://patchwork.freedesktop.org/patch/msgid/20210416092737.1971876-2-narmstrong@baylibre.com
2021-04-20drm/drm_bufs.c: In switch, add break in default caseFabio M. De Francesco1-1/+1
Added a "break" in the default case of a switch select statement. GCC complains, although this "break" is not strictly necessary for the code to work as expected. Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210417161552.6571-1-fmdefrancesco@gmail.com
2021-04-20drm/exynos: Don't set allow_fb_modifiers explicitlyDaniel Vetter1-2/+0
Since commit 890880ddfdbe256083170866e49c87618b706ac7 Author: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Date: Fri Jan 4 09:56:10 2019 +0100 drm: Auto-set allow_fb_modifiers when given modifiers at plane init this is done automatically as part of plane init, if drivers set the modifier list correctly. Which is the case here. Acked-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Inki Dae <inki.dae@samsung.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20210413094904.3736372-3-daniel.vetter@ffwll.ch
2021-04-19drm/bridge/sii8620: fix dependency on extconRobert Foss1-1/+1
The DRM_SIL_SII8620 kconfig has a weak `imply` dependency on EXTCON, which causes issues when sii8620 is built as a builtin and EXTCON is built as a module. The symptoms are 'undefined reference' errors caused by the symbols in EXTCON not being available to the sii8620 driver. Fixes: 688838442147 ("drm/bridge/sii8620: use micro-USB cable detection logic to detect MHL") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Robert Foss <robert.foss@linaro.org> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210419090124.153560-1-robert.foss@linaro.org
2021-04-19drm/amdgpu: check base size instead of mem.num_pagesChristian König1-4/+3
Drop some ussage of mem in the code. Signed-off-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210413135248.1266-2-christian.koenig@amd.com Reviewed-by: Matthew Auld <matthew.auld@intel.com>
2021-04-19drm/nouveau: use bo->base.size instead of mem->num_pagesChristian König3-9/+8
Change a couple of cases where it makes more sense to use the base size instead of the number of pages in the resource. Signed-off-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210413135248.1266-1-christian.koenig@amd.com Reviewed-by: Matthew Auld <matthew.auld@intel.com>
2021-04-19drm/ttm: warn stricter about freeing pinned BOsChristian König1-1/+3
So far we only warned when the BOs where pinned and not idle. Also warn if we see a pinned BO in general. Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Leo Liu <leo.liu@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210415084730.2057-3-christian.koenig@amd.com
2021-04-19drm/amdgpu: freeing pinned objects is illegal nowChristian König1-26/+10
We want to drop support in TTM for this. Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Leo Liu <leo.liu@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210415084730.2057-2-christian.koenig@amd.com
2021-04-19drm/amdgpu: make sure we unpin the UVD BOChristian König1-0/+1
Releasing pinned BOs is illegal now. Signed-off-by: Christian König <christian.koenig@amd.com> Acked-by: Leo Liu <leo.liu@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210415084730.2057-1-christian.koenig@amd.com
2021-04-16drm/bridge: lt8912b: fix incorrect handling of of_* return valuesAdrien Grassein1-15/+17
A static analysis shows several issues in the driver code at probing time. DT parsing errors were bad handled and could lead to bugs: - Bad error detection; - Bad release of resources Fixes: 30e2ae943c26 ("drm/bridge: Introduce LT8912B DSI to HDMI bridge") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Suggested-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Adrien Grassein <adrien.grassein@gmail.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210415183639.1487-1-rdunlap@infradead.org Signed-off-by: Robert Foss <robert.foss@linaro.org>
2021-04-16drm: bridge: fix LONTIUM use of mipi_dsi_() functionsRandy Dunlap1-0/+3
The Lontium DRM bridge drivers use mipi_dsi_() function interfaces so they need to select DRM_MIPI_DSI to prevent build errors. ERROR: modpost: "mipi_dsi_attach" [drivers/gpu/drm/bridge/lontium-lt9611uxc.ko] undefined! ERROR: modpost: "mipi_dsi_device_register_full" [drivers/gpu/drm/bridge/lontium-lt9611uxc.ko] undefined! ERROR: modpost: "of_find_mipi_dsi_host_by_node" [drivers/gpu/drm/bridge/lontium-lt9611uxc.ko] undefined! ERROR: modpost: "mipi_dsi_device_unregister" [drivers/gpu/drm/bridge/lontium-lt9611uxc.ko] undefined! ERROR: modpost: "mipi_dsi_detach" [drivers/gpu/drm/bridge/lontium-lt9611uxc.ko] undefined! ERROR: modpost: "mipi_dsi_attach" [drivers/gpu/drm/bridge/lontium-lt9611.ko] undefined! ERROR: modpost: "mipi_dsi_device_register_full" [drivers/gpu/drm/bridge/lontium-lt9611.ko] undefined! ERROR: modpost: "of_find_mipi_dsi_host_by_node" [drivers/gpu/drm/bridge/lontium-lt9611.ko] undefined! ERROR: modpost: "mipi_dsi_device_unregister" [drivers/gpu/drm/bridge/lontium-lt9611.ko] undefined! ERROR: modpost: "mipi_dsi_detach" [drivers/gpu/drm/bridge/lontium-lt9611.ko] undefined! WARNING: modpost: suppressed 5 unresolved symbol warnings because there were too many) Fixes: 23278bf54afe ("drm/bridge: Introduce LT9611 DSI to HDMI bridge") Fixes: 0cbbd5b1a012 ("drm: bridge: add support for lontium LT9611UXC bridge") Fixes: 30e2ae943c26 ("drm/bridge: Introduce LT8912B DSI to HDMI bridge") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Adren Grassein <adrien.grassein@gmail.com> Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Vinod Koul <vkoul@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Adrien Grassein <adrien.grassein@gmail.com> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Robert Foss <robert.foss@linaro.org> Cc: dri-devel@lists.freedesktop.org Cc: stable@vger.kernel.org Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210415183639.1487-1-rdunlap@infradead.org
2021-04-16drm: bridge: fix ANX7625 use of mipi_dsi_() functionsRandy Dunlap1-0/+1
The Analogix DRM ANX7625 bridge driver uses mips_dsi_() function interfaces so it should select DRM_MIPI_DSI to prevent build errors. ERROR: modpost: "mipi_dsi_attach" [drivers/gpu/drm/bridge/analogix/anx7625.ko] undefined! ERROR: modpost: "mipi_dsi_device_register_full" [drivers/gpu/drm/bridge/analogix/anx7625.ko] undefined! ERROR: modpost: "of_find_mipi_dsi_host_by_node" [drivers/gpu/drm/bridge/analogix/anx7625.ko] undefined! ERROR: modpost: "mipi_dsi_device_unregister" [drivers/gpu/drm/bridge/analogix/anx7625.ko] undefined! ERROR: modpost: "mipi_dsi_detach" [drivers/gpu/drm/bridge/analogix/anx7625.ko] undefined! Fixes: 8bdfc5dae4e3 ("drm/bridge: anx7625: Add anx7625 MIPI DSI/DPI to DP") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Robert Foss <robert.foss@linaro.org> Cc: Xin Ji <xji@analogixsemi.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: dri-devel@lists.freedesktop.org Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Robert Foss <robert.foss@linaro.org> Cc: stable@vger.kernel.org Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210415183619.1431-1-rdunlap@infradead.org
2021-04-15drm/imx: Don't set allow_fb_modifiers explicitlyDaniel Vetter2-2/+0
Since commit 890880ddfdbe256083170866e49c87618b706ac7 Author: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Date: Fri Jan 4 09:56:10 2019 +0100 drm: Auto-set allow_fb_modifiers when given modifiers at plane init this is done automatically as part of plane init, if drivers set the modifier list correctly. Which is the case here for both dcss and imx-drm drivers. Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: linux-arm-kernel@lists.infradead.org Link: https://patchwork.freedesktop.org/patch/msgid/20210413094904.3736372-5-daniel.vetter@ffwll.ch
2021-04-15drm/vc4: Don't set allow_fb_modifiers explicitlyDaniel Vetter1-1/+0
Since commit 890880ddfdbe256083170866e49c87618b706ac7 Author: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Date: Fri Jan 4 09:56:10 2019 +0100 drm: Auto-set allow_fb_modifiers when given modifiers at plane init this is done automatically as part of plane init, if drivers set the modifier list correctly. Which is the case here. Acked-by: Maxime Ripard <maxime@cerno.tech> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Eric Anholt <eric@anholt.net> Cc: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210413094904.3736372-11-daniel.vetter@ffwll.ch
2021-04-15drm/tegra: Don't set allow_fb_modifiers explicitlyDaniel Vetter2-4/+8
Since commit 890880ddfdbe256083170866e49c87618b706ac7 Author: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Date: Fri Jan 4 09:56:10 2019 +0100 drm: Auto-set allow_fb_modifiers when given modifiers at plane init this is done automatically as part of plane init, if drivers set the modifier list correctly. Which is the case here. It was slightly inconsistently though, since planes with only linear modifier support haven't listed that explicitly. Fix that, and cc: stable to allow userspace to rely on this. Again don't backport further than where Paul's patch got added. Cc: stable@vger.kernel.org # v5.1 + Cc: Pekka Paalanen <pekka.paalanen@collabora.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: linux-tegra@vger.kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20210413094904.3736372-10-daniel.vetter@ffwll.ch
2021-04-15drm/virtio: Create Dumb BOs as guest Blobs (v3)Vivek Kasireddy2-0/+11
If support for Blob resources is available, then dumb BOs created by the driver can be considered as guest Blobs. v2: Don't skip transfer and flush commands as part of plane update as the device may have created a shared mapping. (Gerd) v3: Don't create dumb BOs as Guest blobs if Virgl is enabled. (Gurchetan) Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Vivek Kasireddy <vivek.kasireddy@intel.com> Acked-by: Gurchetan Singh <gurchetansingh@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/20210413052614.2486768-1-vivek.kasireddy@intel.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2021-04-14drm/ttm: Don't count pages in SG BOs against pages_limitFelix Kuehling1-9/+18
Pages in SG BOs were not allocated by TTM. So don't count them against TTM's pages limit. Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210414064804.29356-9-Felix.Kuehling@amd.com
2021-04-14drm/aperture: Inline fbdev conflict helpers into aperture helpersThomas Zimmermann2-54/+20
Fbdev's helpers for handling conflicting framebuffer drivers are related to framebuffer apertures, not console emulation. Therefore remove them from drm_fb_helper.h and inline them into the aperture helpers. No functional changes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210412131043.5787-4-tzimmermann@suse.de
2021-04-14drm/aperture: Convert drivers to aperture interfacesThomas Zimmermann19-56/+67
Mass-convert all drivers from FB helpers to aperture interfaces. No functional changes besides checking for returned errno codes. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210412131043.5787-3-tzimmermann@suse.de
2021-04-14drm/aperture: Add infrastructure for aperture ownershipThomas Zimmermann4-1/+158
Platform devices might operate on firmware framebuffers, such as VESA or EFI. Before a native driver for the graphics hardware can take over the device, it has to remove any platform driver that operates on the firmware framebuffer. Aperture helpers provide the infrastructure for native drivers to remove the generic ones. For now, this only concerns generic fbdev drivers. Code for removing these is provided by drm_fb_helper_remove_conflicting_framebuffers() et al. Simply wrap these functions for now. At a later point, code can be added for generic DRM drivers to acquire firmware framebuffers. v2: * fix docs for drm_aperture_remove_framebuffers() Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210412131043.5787-2-tzimmermann@suse.de
2021-04-13efifb: Check efifb_pci_dev before using itKai-Heng Feng1-2/+4
On some platforms like Hyper-V and RPi4 with UEFI firmware, efifb is not a PCI device. So make sure efifb_pci_dev is found before using it. Fixes: a6c0fd3d5a8b ("efifb: Ensure graphics device for efifb stays at PCI D0") BugLink: https://bugs.launchpad.net/bugs/1922403 Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210413170508.968148-1-kai.heng.feng@canonical.com
2021-04-13Merge tag 'drm-msm-next-2021-04-11' of ↵Daniel Vetter58-5024/+5287
https://gitlab.freedesktop.org/drm/msm into drm-next msm-next from Rob: * Big DSI phy/pll cleanup. Includes some clk patches, acked by maintainer * Initial support for sc7280 * compatibles fixes for sm8150/sm8250 * cleanups for all dpu gens to use same bandwidth scaling paths (\o/) * various shrinker path lock contention optimizations * unpin/swap support for GEM objects (disabled by default, enable with msm.enable_eviction=1 .. due to various combinations of iommu drivers with older gens I want to get more testing on hw I don't have in front of me before enabling by default) * The usual assortment of misc fixes and cleanups Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvL=4aw15qoY8fbKG9FCgnx8Y-dCtf7xiFwTQSHopwSQg@mail.gmail.com
2021-04-13Merge drm/drm-fixes into drm-nextDaniel Vetter1148-5031/+9427
msm-next pull request has a baseline with stuff from -fixes, roll forward first. Some simple conflicts in amdgpu, ttm and one in i915 where git gets confused and tries to add the same function twice. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2021-04-13Merge tag 'amd-drm-next-5.13-2021-04-12' of ↵Daniel Vetter251-2798/+6567
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-5.13-2021-04-12: amdgpu: - Re-enable GPU reset on VanGogh - Enable DPM flags for SMART_SUSPEND and MAY_SKIP_RESUME - Disentangle HG from vga_switcheroo - S0ix fixes - W=1 fixes - Resource iterator fixes - DMCUB updates - UBSAN fixes - More PM API cleanup - Aldebaran updates - Modifier fixes - Enable VCN load balancing with asymmetric engines - Rework BO structs - Aldebaran reset support - Initial LTTPR display work - Display MALL fixes - Fall back to YCbCr420 when YCbCr444 fails - SR-IOV fixes - RAS updates - Misc cleanups and fixes radeon: - Typo fixes - Fix error handling for firmware on r6xx - Fix a missing check in DP MST handling Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210412220732.3845-1-alexander.deucher@amd.com
2021-04-13drm: bridge: cdns-mhdp8546: Enable HDCPParshuram Thombare5-13/+801
This patch enable HDCP in MHDP driver. Signed-off-by: Parshuram Thombare <pthombar@cadence.com> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/1618078542-30679-1-git-send-email-pthombar@cadence.com
2021-04-13dt-bindings: drm/bridge: MHDP8546 bridge binding changes for HDCPParshuram Thombare1-4/+11
Add binding changes for HDCP in the MHDP8546 DPI/DP bridge binding. Signed-off-by: Parshuram Thombare <pthombar@cadence.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Robert Foss <robert.foss@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/1618078508-30466-1-git-send-email-pthombar@cadence.com
2021-04-12drm: drm_atomic_helper.c: Correct comments formatFabio M. De Francesco1-11/+21
Corrected comments format in accordance to the Linux style guides. Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210412124213.4628-3-fmdefrancesco@gmail.com
2021-04-12drm: drm_atomic_helper.c: Replace "unsigned" with "unsigned int"Fabio M. De Francesco1-4/+4
Replaced "unsigned with "unsigned int" since the latter is preferred. Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210412124213.4628-2-fmdefrancesco@gmail.com
2021-04-12gpu: drm: Replace bare "unsigned" with "unsigned int"Fabio M. De Francesco1-2/+2
Replaced the type "unsigned" with "unsigned int" because it is preferred. Issue detected by checkpatch.pl. Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210412105309.27156-1-fmdefrancesco@gmail.com
2021-04-12drm/ttm: re-add debugfs tt_shrink fileChristian König1-0/+20
That got lost when we moved back to a static limit. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210409130113.1459-2-christian.koenig@amd.com
2021-04-12drm/ttm: fix return value checkChristian König1-1/+1
The function returns the number of swapped pages here. Only abort when we get a negative error code. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210409130113.1459-1-christian.koenig@amd.com
2021-04-11Linux 5.12-rc7v5.12-rc7Linus Torvalds1-1/+1
2021-04-11Merge tag 'for-5.12-rc6-tag' of ↵Linus Torvalds1-11/+42
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fix from David Sterba: "One more patch that we'd like to get to 5.12 before release. It's changing where and how the superblock is stored in the zoned mode. It is an on-disk format change but so far there are no implications for users as the proper mkfs support hasn't been merged and is waiting for the kernel side to settle. Until now, the superblocks were derived from the zone index, but zone size can differ per device. This is changed to be based on fixed offset values, to make it independent of the device zone size. The work on that got a bit delayed, we discussed the exact locations to support potential device sizes and usecases. (Partially delayed also due to my vacation.) Having that in the same release where the zoned mode is declared usable is highly desired, there are userspace projects that need to be updated to recognize the feature. Pushing that to the next release would make things harder to test" * tag 'for-5.12-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: zoned: move superblock logging zone location
2021-04-11Merge tag 'locking-urgent-2021-04-11' of ↵Linus Torvalds1-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixlets from Ingo Molnar: "Two minor fixes: one for a Clang warning, the other improves an ambiguous/confusing kernel log message" * tag 'locking-urgent-2021-04-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: lockdep: Address clang -Wformat warning printing for %hd lockdep: Add a missing initialization hint to the "INFO: Trying to register non-static key" message
2021-04-11Merge tag 'x86_urgent_for_v5.12-rc7' of ↵Linus Torvalds2-5/+14
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: - Fix the vDSO exception handling return path to disable interrupts again. - A fix for the CE collector to return the proper return values to its callers which are used to convey what the collector has done with the error address. * tag 'x86_urgent_for_v5.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/traps: Correct exc_general_protection() and math_error() return paths RAS/CEC: Correct ce_add_elem()'s returned values
2021-04-11drm/qxl: Use drm_gem_ttm_dumb_map_offset()Thomas Zimmermann5-28/+4
Qxl now uses drm_gem_ttm_dumb_map_offset() to implement struct drm_driver.dumb_map_offset. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210408140139.27731-5-tzimmermann@suse.de
2021-04-11drm/nouveau: Use drm_gem_ttm_dumb_map_offset()Thomas Zimmermann3-21/+2
Nouveau now uses drm_gem_ttm_dumb_map_offset() to implement struct drm_driver.dumb_map_offset. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210408140139.27731-4-tzimmermann@suse.de
2021-04-11drm/vram-helper: Use drm_gem_ttm_dumb_map_offset()Thomas Zimmermann3-54/+3
VRAM helpers now use drm_gem_ttm_dumb_map_offset() to implement struct drm_driver.dumb_map_offset. v2: * update hibmc as well (kernel test robot) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210408140139.27731-3-tzimmermann@suse.de
2021-04-11drm/gem-ttm-helper: Provide helper for struct drm_driver.dumb_map_offsetThomas Zimmermann2-1/+37
Provides an implementation of struct drm_driver.dumb_map_offset that can be used by TTM-based GEM drivers. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210408140139.27731-2-tzimmermann@suse.de
2021-04-10Merge branch 'for-5.12-fixes' of ↵Linus Torvalds3-10/+15
git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu Pull percpu fix from Dennis Zhou: "This contains a fix for sporadically failing atomic percpu allocations. I only caught it recently while I was reviewing a new series [1] and simultaneously saw reports by btrfs in xfstests [2] and [3]. In v5.9, memcg accounting was extended to percpu done by adding a second type of chunk. I missed an interaction with the free page float count used to ensure we can support atomic allocations. If one type of chunk has no free pages, but the other has enough to satisfy the free page float requirement, we will not repopulate the free pages for the former type of chunk. This led to the sporadically failing atomic allocations" Link: https://lore.kernel.org/linux-mm/20210324190626.564297-1-guro@fb.com/ [1] Link: https://lore.kernel.org/linux-mm/20210401185158.3275.409509F4@e16-tech.com/ [2] Link: https://lore.kernel.org/linux-mm/CAL3q7H5RNBjCi708GH7jnczAOe0BLnacT9C+OBgA-Dx9jhB6SQ@mail.gmail.com/ [3] * 'for-5.12-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu: percpu: make pcpu_nr_empty_pop_pages per chunk type
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-17 20:31:14 +0000