summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2009-08-11ia64: boolean __test_and_clear_bitJohannes Weiner1-1/+1
__test_and_clear_bit() returns a bitfield with the tested-for bit set. Make it consistent with the other bitops - of ia64 but also every other architecture - and return a boolean value. Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Fenghua Yu <fenghua.yu@intel.com>
2009-08-11Bug Fix arch/ia64/kernel/pci-dma.c: fix recursive dma_supported() call in ↵Fenghua Yu1-5/+0
iommu_dma_supported() In commit 160c1d8e40866edfeae7d68816b7005d70acf391, dma_ops->dma_supported = iommu_dma_supported; This dma_ops->dma_supported is first called in platform_dma_init() during kernel boot. Then dma_ops->dma_supported will be called recursively in iommu_dma_supported. Kernel can not boot because kernel can not get out of iommu_dma_supported until it runs out of stack memory. Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
2009-08-11x86: Clear incorrectly forced X86_FEATURE_LAHF_LM flagKevin Winchester1-0/+7
Due to an erratum with certain AMD Athlon 64 processors, the BIOS may need to force enable the LAHF_LM capability. Unfortunately, in at least one case, the BIOS does this even for processors that do not support the functionality. Add a specific check that will clear the feature bit for processors known not to support the LAHF/SAHF instructions. Signed-off-by: Kevin Winchester <kjwinchester@gmail.com> Acked-by: Borislav Petkov <petkovbb@googlemail.com> LKML-Reference: <4A80A5AD.2000209@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-11x86, mce: therm_throt - change when we print messagesDmitry Torokhov1-7/+11
My Latitude d630 seems to be handling thermal events in SMI by lowering the max frequency of the CPU till it cools down but still leaks the "everything is normal" events. This spams the console and with high priority printks. Adjust therm_throt driver to only print messages about the fact that temperatire returned back to normal when leaving the throttling state. Also lower the severity of "back to normal" message from KERN_CRIT to KERN_INFO. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Acked-by: H. Peter Anvin <hpa@zytor.com> LKML-Reference: <20090810051513.0558F526EC9@mailhub.coreip.homeip.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-11ALSA: hda - Don't override ADC definitions for ALC codecsTakashi Iwai1-6/+12
ALC269 and ALC861-VD parsers override the ADC definitions unconditionally without checking the spec definition. This causes the problem when any inconsistent ADC is set up in the device quirk (like ALC272 with digital-mic). This patch avoids the overriding by adding the proper checks. Reference: Novell bnc#529467 https://bugzilla.novell.com/show_bug.cgi?id=529467 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-10Merge branch 'for-linus' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: SELinux: fix memory leakage in /security/selinux/hooks.c
2009-08-11SELinux: fix memory leakage in /security/selinux/hooks.cJames Morris1-1/+2
Fix memory leakage in /security/selinux/hooks.c The buffer always needs to be freed here; we either error out or allocate more memory. Reported-by: iceberg <strakh@ispras.ru> Signed-off-by: James Morris <jmorris@namei.org> Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
2009-08-10PM / Driver Core: Kill dev_pm_ops platform warning for nowMagnus Damm1-3/+0
Commit 783ea7d4eeefe895f2731fe73ac951e94418927b (Driver Core: Rework platform suspend/resume, print warning) added a warning message printed for platform drivers that use the legacy PM callbacks rather than struct dev_pm_ops. Unfortunately, this resulted in some confusion and made some people try to convert drivers by replacing the old callbacks with struct dev_pm_ops in automatic way, which generally is not a good idea. Remove the platform device runtime dev_pm_ops warning for now, because it's annoying to users and it's not really necessary right now. [rjw: Modified the changelog to be more informative.] Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2009-08-10pty: fix data loss when stopped (^S/^Q)Linus Torvalds1-0/+2
Commit d945cb9cc ("pty: Rework the pty layer to use the normal buffering logic") dropped the test for 'tty->stopped' in pty_write_room(), which then causes the n_tty line discipline thing to not throttle the data properly when the tty is stopped. So instead of pausing the write due to the tty being stopped, the ldisc layer would go ahead and push it down to the pty. The pty write() routine would then refuse to take the data (because it _did_ check 'stopped'), and the data wouldn't actually be written. This whole stopped test should eventually be moved into the tty ldisc layer rather than have low-level tty drivers care about these things, but right now the fix is to just re-instate the missing pty 'stopped' handling. Reported-and-tested-by: Artur Skawina <art.08.09@gmail.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-08-10ocfs2: Fix possible deadlock when extending quota fileJan Kara2-63/+57
In OCFS2, allocator locks rank above transaction start. Thus we cannot extend quota file from inside a transaction less we could deadlock. We solve the problem by starting transaction not already in ocfs2_acquire_dquot() but only in ocfs2_local_read_dquot() and ocfs2_global_read_dquot() and we allocate blocks to quota files before starting the transaction. In case we crash, quota files will just have a few blocks more but that's no problem since we just use them next time we extend the quota file. Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Joel Becker <joel.becker@oracle.com>
2009-08-10x86: Add reboot quirk for every 5 series MacBook/ProShunichi Fuji1-6/+6
Reboot does not work on my MacBook Pro 13 inch (MacBookPro5,5) too. It seems all unibody MacBook and MacBookPro require PCI reboot handling, i guess. Following model/machine ID list shows unibody MacBook/Pro have the 5 series of model number: http://www.everymac.com/systems/by_capability/macs-by-machine-model-machine-id.html Signed-off-by: Shunichi Fuji <palglowr@gmail.com> Cc: Ozan Çağlayan <ozan@pardus.org.tr> LKML-Reference: <30046e3b0908101134p6487ddbftd8776e4ddef204be@mail.gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-10Merge branch 'perfcounters-fixes-for-linus' of ↵Linus Torvalds19-201/+1212
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (27 commits) perf_counter: Zero dead bytes from ftrace raw samples size alignment perf_counter: Subtract the buffer size field from the event record size perf_counter: Require CAP_SYS_ADMIN for raw tracepoint data perf_counter: Correct PERF_SAMPLE_RAW output perf tools: callchain: Fix bad rounding of minimum rate perf_counter tools: Fix libbfd detection for systems with libz dependency perf: "Longum est iter per praecepta, breve et efficax per exempla" perf_counter: Fix a race on perf_counter_ctx perf_counter: Fix tracepoint sampling to be part of generic sampling perf_counter: Work around gcc warning by initializing tracepoint record unconditionally perf tools: callchain: Fix sum of percentages to be 100% by displaying amount of ignored chains in fractal mode perf tools: callchain: Fix 'perf report' display to be callchain by default perf tools: callchain: Fix spurious 'perf report' warnings: ignore empty callchains perf record: Fix the -A UI for empty or non-existent perf.data perf util: Fix do_read() to fail on EOF instead of busy-looping perf list: Fix the output to not include tracepoints without an id perf_counter/powerpc: Fix oops on cpus without perf_counter hardware support perf stat: Fix tool option consistency: rename -S/--scale to -c/--scale perf report: Add debug help for the finding of symbol bugs - show the symtab origin (DSO, build-id, kernel, etc) perf report: Fix per task mult-counter stat reporting ...
2009-08-10futex: Fix handling of bad requeue syscall pairingDarren Hart1-2/+9
If futex_requeue(requeue_pi=1) finds a futex_q that was created by a call other the futex_wait_requeue_pi(), the q.rt_waiter may be null. If so, this will result in an oops from the following call graph: futex_requeue() rt_mutex_start_proxy_lock() task_blocks_on_rt_mutex() waiter->task dereference OOPS We currently WARN_ON() if this is detected, clearly this is inadequate. If we detect a mispairing in futex_requeue(), bail out, seding -EINVAL to user-space. V2: Fix parenthesis warnings. Signed-off-by: Darren Hart <dvhltc@us.ibm.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: John Kacur <jkacur@redhat.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Dinakar Guniguntala <dino@in.ibm.com> Cc: John Stultz <johnstul@linux.vnet.ibm.com> LKML-Reference: <4A7CA8C0.7010809@us.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-10Merge branch 'irq-fixes-for-linus' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86/irq: Fix move_irq_desc() for nodes without ram
2009-08-10Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds1-7/+22
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Fix serialization in pit_expect_msb()
2009-08-10Merge branch 'for-linus' of ↵Linus Torvalds1-4/+3
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI hotplug: SGI hotplug: do not use hotplug_slot_attr PCI hotplug: SGI hotplug: fix build failure
2009-08-10x86: Fix serialization in pit_expect_msb()Linus Torvalds1-7/+22
Wei Chong Tan reported a fast-PIT-calibration corner-case: | pit_expect_msb() is vulnerable to SMI disturbance corner case | in some platforms which causes /proc/cpuinfo to show wrong | CPU MHz value when quick_pit_calibrate() jumps to success | section. I think that the real issue isn't even an SMI - but the fact that in the very last iteration of the loop, there's no serializing instruction _after_ the last 'rdtsc'. So even in the absense of SMI's, we do have a situation where the cycle counter was read without proper serialization. The last check should be done outside the outer loop, since _inside_ the outer loop, we'll be testing that the PIT has the right MSB value has the right value in the next iteration. So only the _last_ iteration is special, because that's the one that will not check the PIT MSB value any more, and because the final 'get_cycles()' isn't serialized. In other words: - I'd like to move the PIT MSB check to after the last iteration, rather than in every iteration - I think we should comment on the fact that it's also a serializing instruction and so 'fences in' the TSC read. Here's a suggested replacement. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Reported-by: "Tan, Wei Chong" <wei.chong.tan@intel.com> Tested-by: "Tan, Wei Chong" <wei.chong.tan@intel.com> LKML-Reference: <B28277FD4E0F9247A3D55704C440A140D5D683F3@pgsmsx504.gar.corp.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-10Merge branch 'for-linus' of ↵Linus Torvalds3-15/+14
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: mm_for_maps: take ->cred_guard_mutex to fix the race with exec mm_for_maps: shift down_read(mmap_sem) to the caller mm_for_maps: simplify, use ptrace_may_access()
2009-08-10Merge branch 'merge' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/dma: pci_set_dma_mask() shouldn't fail if mask fits in RAM
2009-08-10MN10300: includecheck fix: mn10300, pci.hJaswinder Singh Rajput1-1/+0
Fix the following 'make includecheck' warning: arch/mn10300/include/asm/pci.h: linux/mm.h is included more than once. Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-08-10mempool.c: clean up type-castingFigo.zhang1-2/+2
clean up type-casting twice. "size_t" is typedef as "unsigned long" in 64-bit system, and "unsigned int" in 32-bit system, and the intermediate cast to 'long' is pointless. Signed-off-by: Figo.zhang <figo1802@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-08-10documentation: register ioctl entry of nilfs2Ryusuke Konishi1-0/+1
This will register the ioctl range used by nilfs2 file system to the table listed in Documentation/ioctl/ioctl-number.txt. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-08-10perf_counter: Zero dead bytes from ftrace raw samples size alignmentFrederic Weisbecker1-0/+4
After aligning the ftrace raw samples, there are dead bytes storing random data from the stack. We don't want to leak these to userspace, then zero these out. Before: 0x2de88 [0x50]: event: 9 . . ... raw event: size 80 bytes . 0000: 09 00 00 00 01 00 50 00 d0 c7 00 81 ff ff ff ff ......P........ . 0010: 68 01 00 00 68 01 00 00 2c 00 00 00 00 00 00 00 h...h...,...... . 0020: 2c 00 00 00 2b 00 01 02 68 01 00 00 68 01 00 00 ,...+...h...h.. . 0030: 6b 6f 6e 64 65 6d 61 6e 64 2f 30 00 00 00 00 00 kondemand/0.... . 0040: 68 01 00 00 40 7f 46 81 ff ff ff ff 00 10 1b 7f h...@.F........ ^ ^ ^ ^ Leak After: 0x2d318 [0x50]: event: 9 . . ... raw event: size 80 bytes . 0000: 09 00 00 00 01 00 50 00 d0 c7 00 81 ff ff ff ff ......P........ . 0010: 68 01 00 00 68 01 00 00 68 14 00 00 00 00 00 00 h...h...h...... . 0020: 2c 00 00 00 2b 00 01 02 68 01 00 00 68 01 00 00 ,...+...h...h.. . 0030: 6b 6f 6e 64 65 6d 61 6e 64 2f 30 00 00 00 00 00 kondemand/0.... . 0040: 68 01 00 00 a0 80 46 81 ff ff ff ff 00 00 00 00 h.....F........ ^ ^ ^ ^ Fixed Reported-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1249915116-5210-1-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de>
2009-08-10perf_counter: Subtract the buffer size field from the event record sizeFrederic Weisbecker1-1/+7
We compute the perf raw sample size by aligning the raw ftrace event size plus the buffer size field itself. We do that instead of aligning only the perf raw sample size, so that we might economize some in some cases. But this buffer size field is not stored in the perf raw sample, we must then substract its size from the buffer once we computed the alignment unless we may get a useless u32 field in the buffer. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <20090810141129.GA5124@nowhere> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-10futex: Fix compat_futex to be same as futex for REQUEUE_PIDinakar Guniguntala1-2/+4
Need to add the REQUEUE_PI checks to the compat_sys_futex API as well to ensure 32 bit requeue's work fine on a 64 bit system. Patch is against latest tip Signed-off-by: Dinakar Guniguntala <dino@in.ibm.com> Cc: Darren Hart <dvhltc@us.ibm.com> LKML-Reference: <20090810130142.GA23619@in.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-10locking, sched: Give waitqueue spinlocks their own lockdep classesPeter Zijlstra2-3/+11
Give waitqueue spinlocks their own lockdep classes when they are initialised from init_waitqueue_head(). This means that struct wait_queue::func functions can operate other waitqueues. This is used by CacheFiles to catch the page from a backing fs being unlocked and to wake up another thread to take a copy of it. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Takashi Iwai <tiwai@suse.de> Cc: linux-cachefs@redhat.com Cc: torvalds@osdl.org Cc: akpm@linux-foundation.org LKML-Reference: <20090810113305.17284.81508.stgit@warthog.procyon.org.uk> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-10mm_for_maps: take ->cred_guard_mutex to fix the race with execOleg Nesterov1-11/+11
The problem is minor, but without ->cred_guard_mutex held we can race with exec() and get the new ->mm but check old creds. Now we do not need to re-check task->mm after ptrace_may_access(), it can't be changed to the new mm under us. Strictly speaking, this also fixes another very minor problem. Unless security check fails or the task exits mm_for_maps() should never return NULL, the caller should get either old or new ->mm. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-08-10mm_for_maps: shift down_read(mmap_sem) to the callerOleg Nesterov3-5/+5
mm_for_maps() takes ->mmap_sem after security checks, this looks strange and obfuscates the locking rules. Move this lock to its single caller, m_start(). Signed-off-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-08-10mm_for_maps: simplify, use ptrace_may_access()Oleg Nesterov1-12/+11
It would be nice to kill __ptrace_may_access(). It requires task_lock(), but this lock is only needed to read mm->flags in the middle. Convert mm_for_maps() to use ptrace_may_access(), this also simplifies the code a little bit. Also, we do not need to take ->mmap_sem in advance. In fact I think mm_for_maps() should not play with ->mmap_sem at all, the caller should take this lock. With or without this patch, without ->cred_guard_mutex held we can race with exec() and get the new ->mm but check old creds. Signed-off-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
2009-08-10ALSA: hda - Add missing vmaster initialization for ALC269Takashi Iwai1-0/+2
Without the initialization of vmaster NID, the dB information got confused for ALC269 codec. Reference: Novell bnc#527361 https://bugzilla.novell.com/show_bug.cgi?id=527361 Signed-off-by: Takashi Iwai <tiwai@suse.de> Cc: <stable@kernel.org>
2009-08-10perf_counter: Require CAP_SYS_ADMIN for raw tracepoint dataPeter Zijlstra1-0/+8
Raw tracepoint data contains various kernel internals and data from other users, so restrict this to CAP_SYS_ADMIN. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1249896452.17467.75.camel@twins> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-10perf_counter: Correct PERF_SAMPLE_RAW outputPeter Zijlstra3-7/+28
PERF_SAMPLE_* output switches should unconditionally output the correct format, as they are the only way to unambiguously parse the PERF_EVENT_SAMPLE data. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1249896447.17467.74.camel@twins> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-10futex: Update futex_q lock_ptr on requeue proxy lockDarren Hart1-4/+13
futex_requeue() can acquire the lock on behalf of a waiter early on or during the requeue loop if it is uncontended or in the event of a lock steal or owner died. On wakeup, the waiter (in futex_wait_requeue_pi()) cleans up the pi_state owner using the lock_ptr to protect against concurrent access to the pi_state. The pi_state is hung off futex_q's on the requeue target futex hash bucket so the lock_ptr needs to be updated accordingly. The problem manifested by triggering the WARN_ON in lookup_pi_state() about the pid != pi_state->owner->pid. With this patch, the pi_state is properly guarded against concurrent access via the requeue target hb lock. The astute reviewer may notice that there is a window of time between when futex_requeue() unlocks the hb locks and when futex_wait_requeue_pi() will acquire hb2->lock. During this time the pi_state and uval are not in sync with the underlying rtmutex owner (but the uval does indicate there are waiters, so no atomic changes will occur in userspace). However, this is not a problem. Should a contending thread enter lookup_pi_state() and acquire hb2->lock before the ownership is fixed up, it will find the pi_state hung off a waiter's (possibly the pending owner's) futex_q and block on the rtmutex. Once futex_wait_requeue_pi() fixes up the owner, it will also move the pi_state from the old owner's task->pi_state_list to its own. v3: Fix plist lock name for application to mainline (rather than -rt) Compile tested against tip/v2.6.31-rc5. Signed-off-by: Darren Hart <dvhltc@us.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Dinakar Guniguntala <dino@in.ibm.com> Cc: John Stultz <johnstul@linux.vnet.ibm.com> LKML-Reference: <4A7F4EFF.6090903@us.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-10powerpc/dma: pci_set_dma_mask() shouldn't fail if mask fits in RAMBenjamin Herrenschmidt1-3/+3
On an iMac G5, the b43 driver is failing to initialise because trying to set the dma mask to 30-bit fails. Even though there's only 512MiB of RAM in the machine anyway: https://bugzilla.redhat.com/show_bug.cgi?id=514787 We should probably let it succeed if the available RAM in the system doesn't exceed the requested limit. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-08-10Remove deadlock potential in md_openNeilBrown2-8/+20
A recent commit: commit 449aad3e25358812c43afc60918c5ad3819488e7 introduced the possibility of an A-B/B-A deadlock between bd_mutex and reconfig_mutex. __blkdev_get holds bd_mutex while calling md_open which takes reconfig_mutex, do_md_run is always called with reconfig_mutex held, and it now takes bd_mutex in the call the revalidate_disk. This potential deadlock was not caught by lockdep due to the use of mutex_lock_interruptible_nexted which was introduced by commit d63a5a74dee87883fda6b7d170244acaac5b05e8 do avoid a warning of an impossible deadlock. It is quite possible to split reconfig_mutex in to two locks. One protects the array data structures while it is being reconfigured, the other ensures that an array is never even partially open while it is being deactivated. In particular, the second lock prevents an open from completing between the time when do_md_stop checks if there are any active opens, and the time when the array is either set read-only, or when ->pers is set to NULL. So we can be certain that no IO is in flight as the array is being destroyed. So create a new lock, open_mutex, just to ensure exclusion between 'open' and 'stop'. This avoids the deadlock and also avoids the lockdep warning mentioned in commit d63a5a74d Reported-by: "Mike Snitzer" <snitzer@gmail.com> Reported-by: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: NeilBrown <neilb@suse.de>
2009-08-09Merge branch 'for-linus' of git://git.infradead.org/ubi-2.6Linus Torvalds2-1/+13
* 'for-linus' of git://git.infradead.org/ubi-2.6: UBI: compatible fallback in absense of sequence numbers UBI: fix double free on error path
2009-08-09Merge branch 'kvm-updates/2.6.31' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds13-41/+110
* 'kvm-updates/2.6.31' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: Avoid redelivery of edge interrupt before next edge KVM: MMU: limit rmap chain length KVM: ia64: fix build failures due to ia64/unsigned long mismatches KVM: Make KVM_HPAGES_PER_HPAGE unsigned long to avoid build error on powerpc KVM: fix ack not being delivered when msi present KVM: s390: fix wait_queue handling KVM: VMX: Fix locking imbalance on emulation failure KVM: VMX: Fix locking order in handle_invalid_guest_state KVM: MMU: handle n_free_mmu_pages > n_alloc_mmu_pages in kvm_mmu_change_mmu_pages KVM: SVM: force new asid on vcpu migration KVM: x86: verify MTRR/PAT validity KVM: PIT: fix kpit_elapsed division by zero KVM: Fix KVM_GET_MSR_INDEX_LIST
2009-08-09Merge branch 'drm-fixes' of ↵Linus Torvalds3-3/+5
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/i915: silence vblank warnings drm: silence pointless vblank warning. drm: When adding probed modes, preserve duplicate mode types
2009-08-09Merge branch 'timers-fixes-for-linus' of ↵Linus Torvalds1-3/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: posix_cpu_timers_exit_group(): Do not use thread_group_cputimer()
2009-08-09Merge branch 'tracing-fixes-for-linus' of ↵Linus Torvalds10-50/+207
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'tracing-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf_counter: Fix/complete ftrace event records sampling perf_counter, ftrace: Fix perf_counter integration tracing/filters: Always free pred on filter_add_subsystem_pred() failure tracing/filters: Don't use pred on alloc failure ring-buffer: Fix memleak in ring_buffer_free() tracing: Fix recordmcount.pl to handle sections with only weak functions ring-buffer: Fix advance of reader in rb_buffer_peek() tracing: do not use functions starting with .L in recordmcount.pl ring-buffer: do not disable ring buffer on oops_in_progress ring-buffer: fix check of try_to_discard result
2009-08-09Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds5-9/+21
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: fix buffer overflow in efi_init() x86: Add quirk to make Apple MacBookPro5,1 use reboot=pci x86: Fix MSI-X initialization by using online_mask for x2apic target_cpus x86: Fix VMI && stack protector
2009-08-09Merge branch 'core-fixes-for-linus-2' of ↵Linus Torvalds3-7/+6
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: lockdep: Fix typos in documentation lockdep: Fix file mode of lock_stat rtmutex: Avoid deadlock in rt_mutex_start_proxy_lock()
2009-08-09perf tools: callchain: Fix bad rounding of minimum rateFrederic Weisbecker1-2/+3
Sometimes we get callchain branches that have a rate under the limit given by the user. Say you launched: perf record -f -g -a ./hackbench 10 perf report -g fractal,10.0 And you got: 2.33% hackbench [kernel] [k] _spin_lock_irqsave | |--78.57%-- remove_wait_queue | poll_freewait | do_sys_poll | sys_poll | sysenter_dispatch | 0xf7ffa430 | 0x1ffadea3c | |--7.14%-- __up_read | up_read | do_page_fault | page_fault | 0xf7ffa430 | 0xa0df710000000a ... It is abnormal to get a 7.14% branch whereas we passed a 10% filter. The problem is that we round down the minimum threshold. This happens mostly when we have very low number of events. If the total amount of your branch is 4 and you have a subranch of 3 events, filtering to 90% will be computed like follows: limit = 4 * 0.9; The result is about 3.6, but the cast to integer will round down to 3. It means that our filter is actually of 75% We must then explicitly round up the minimum threshold. Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: acme@redhat.com Cc: peterz@infradead.org Cc: efault@gmx.de LKML-Reference: <20090809024235.GA10146@nowhere> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-09perf_counter tools: Fix libbfd detection for systems with libz dependencyMike Galbraith1-0/+4
Due to a libz dependency in some distro's binutils package, C++ demangle support isn't compiled in despite the necessary libraries being available. Fix this by adding a -lz link test to the dependency detection rules. Signed-off-by: Mike Galbraith <efault@gmx.de> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1249733655.6929.5.camel@marge.simson.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-09perf: "Longum est iter per praecepta, breve et efficax per exempla"Carlos R. Mafra1-0/+225
A few examples of how 'perf' can be used, from an e-mail by Ingo Molnar http://lkml.org/lkml/2009/8/4/346. Signed-off-by: Carlos R. Mafra <crmafra2@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Valdis.Kletnieks@vt.edu LKML-Reference: <20090805185334.GA4535@Pilar.aei.mpg.de> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-09perf_counter: Fix a race on perf_counter_ctxPeter Zijlstra1-15/+15
While extending perfcounters with BTS hw-tracing, Markus Metzger managed to trigger this warning: [ 995.557128] WARNING: at kernel/perf_counter.c:1191 __perf_counter_task_sched_out+0x48/0x6b() triggers because commit 9f498cc5be7e013d8d6e4c616980ed0ffc8680d2 (perf_counter: Full task tracing) removed clearing of tsk->perf_counter_ctxp out from under ctx->lock which introduced a race (against perf_lock_task_context). Move it back and deal with the exit notification by explicitly passing along the former task context. Reported-by: Markus T Metzger <markus.t.metzger@intel.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1249667341.17467.5.camel@twins> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-09perf_counter: Fix tracepoint sampling to be part of generic samplingFrederic Weisbecker2-15/+15
Based on Peter's comments, make tracepoint sampling generic just like all the other sampling bits are. This is a rename with no code changes: - PERF_SAMPLE_TP_RECORD to PERF_SAMPLE_RAW - struct perf_tracepoint_record to perf_raw_record We want the system in place that transport tracepoints raw samples events into the perf ring buffer to be generalized and usable by any type of counter. Reported-by; Peter Zijlstra <peterz@infradead.org> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1249698400-5441-4-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-09perf_counter: Work around gcc warning by initializing tracepoint record ↵Frederic Weisbecker1-3/+4
unconditionally Despite that the tracepoint record is always present when the PERF_SAMPLE_TP_RECORD flag is set, gcc raises a warning, thinking it might not be initialized: kernel/perf_counter.c: In function ‘perf_counter_output’: kernel/perf_counter.c:2650: warning: ‘tp’ may be used uninitialized in this function Then, initialize it to NULL and always check if it's not NULL before dereference it. Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1249698400-5441-2-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-09perf tools: callchain: Fix sum of percentages to be 100% by displaying ↵Frederic Weisbecker1-3/+44
amount of ignored chains in fractal mode When we filter the callchains below a given percentage, we ignore them and the end result only shows entries that have an upper percentage than the filter threshold. It seems to users then that we have an imbalance in the percentage, as if the sum inside a profiled branch doesn't reach 100%. Since in the past there have been real perf report bugs that showed the same sypmtom, it would be nice to assure the user that the data is perfect and trustable and it all sums up to 100.00%. So fix this by displaying the remaining hits that have been filtered but without more detail than their amount in each branches. Example while filtering below 50%: 7.73% [k] delay_tsc | |--98.22%-- __const_udelay | | | |--86.37%-- ath5k_hw_register_timeout | | ath5k_hw_noise_floor_calibration | | ath5k_hw_reset | | ath5k_reset | | ath5k_config | | ieee80211_hw_config | | | | | |--88.53%-- ieee80211_scan_work | | | worker_thread | | | kthread | | | child_rip | | --11.47%-- [...] | --13.63%-- [...] --1.78%-- [...] Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1249690585-9145-4-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-09perf tools: callchain: Fix 'perf report' display to be callchain by defaultFrederic Weisbecker2-1/+16
If we recorded with -g option to record the callchain, right now we require a -g option to perf report as well - and people reported this as unnecessary complication: the user already specified -g once, no need to require it a second time. So if the recording includes call-chains, display the callchain by default from perf report. ( The user can override this default using "-g none" option from perf report. ) Reported-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Mike Galbraith <efault@gmx.de> LKML-Reference: <1249690585-9145-3-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-19 22:31:06 +0000