summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2019-06-26pwm: meson: Add the per-channel register offsets and bits in a structMartin Blumenstingl1-56/+34
Introduce struct meson_pwm_channel_data which contains the per-channel offsets for the PWM register and REG_MISC_AB bits. Replace the existing switch (pwm->hwpwm) statements with an access to the new struct. This simplifies the code and will make it easier to implement pwm_ops.get_state() because the switch-case which all per-channel registers and offsets (as previously implemented in meson_pwm_enable()) doesn't have to be duplicated. No functional changes intended. Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-26pwm: meson: Add the meson_pwm_channel data to struct meson_pwmMartin Blumenstingl1-15/+10
Make struct meson_pwm_channel accessible from struct meson_pwm. PWM core has a limitation: per-channel data can only be set after pwmchip_add() is called. However, pwmchip_add() internally calls pwm_ops.get_state(). If pwm_ops.get_state() needs access to the per-channel data it has to obtain it from struct pwm_chip and struct pwm_device's hwpwm information. Add a struct meson_pwm_channel for each PWM channel to struct meson_pwm so the pwm_ops.get_state() callback can be implemented as it needs access to the clock from struct meson_pwm_channel. Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-26pwm: meson: Pass struct pwm_device to meson_pwm_calc()Martin Blumenstingl1-3/+3
meson_pwm_calc() is the last function that accepts a struct meson_pwm_channel. meson_pwm_enable(), meson_pwm_disable() and meson_pwm_apply() for example are all taking a struct pwm_device as parameter. When they need the struct meson_pwm_channel these functions simply call pwm_get_chip_data() internally. Make meson_pwm_calc() consistent with the other functions in the meson-pwm driver by passing struct pwm_device to it as well. The value of the "id" parameter is actually pwm->hwpwm, but the driver never read the "id" parameter, which is why there's no replacement for it in the new code. No functional changes. Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-26pwm: meson: Don't duplicate the polarity internallyMartin Blumenstingl1-15/+8
Let meson_pwm_calc() use the polarity from struct pwm_state directly. This removes a level of indirection where meson_pwm_apply() first had to set a driver-internal inverter mask which was then only used by meson_pwm_calc(). Instead of adding the polarity as parameter to meson_pwm_calc() switch to struct pwm_state directly to make it easier to see where the parameters are actually coming from. Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-26pwm: meson: Change MISC_CLK_SEL_WIDTH to MISC_CLK_SEL_MASKMartin Blumenstingl1-2/+2
MISC_CLK_SEL_WIDTH is only used in one place where it's converted into a bit-mask. Rename and change the macro to be a bit-mask so that conversion is not needed anymore. No functional changes intended. Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-26pwm: meson: Use GENMASK and FIELD_PREP for the lo and hi valuesMartin Blumenstingl1-2/+6
meson_pwm_calc() ensures that "lo" is always less than 16 bits wide (otherwise it would overflow into the "hi" part of the REG_PWM_{A,B} register). Use GENMASK and FIELD_PREP for the lo and hi values to make it easier to spot how wide these are internally. Additionally this is a preparation step for the .get_state() implementation where the GENMASK() for lo and hi becomes handy because it can be used with FIELD_GET() to extract the values from the register REG_PWM_{A,B} register. No functional changes intended. Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-26pwm: meson: Use devm_clk_get_optional() to get the input clockMartin Blumenstingl1-8/+3
Simplify the code which fetches the input clock for a PWM channel by using devm_clk_get_optional(). This comes with a small functional change: previously all errors except EPROBE_DEFER were ignored. Now all other errors are also treated as errors. If no input clock is present devm_clk_get_optional() will return NULL instead of an error which matches the behavior of the old code. Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-26pwm: meson: Unify the parameter list of meson_pwm_{enable, disable}Martin Blumenstingl1-8/+7
This is a preparation for a future cleanup. Pass struct pwm_device instead of passing the individual values required by each function as these can be obtained for each struct pwm_device instance. As a nice side-effect the driver now uses "switch (pwm->hwpwm)" everywhere. Before some functions used "switch (id)" while others used "switch (pwm->hwpwm)". No functional changes. Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-26pwm: jz4740: Force TCU2 channels to return to their init levelPaul Cercueil1-1/+9
When the PWM mode of TCU2 channels is disabled, their corresponding pin does not always return to its initial level. Force this by using a small trick: we set duty > period, which is an invalid configuration for the hardware, which then correctly resets the pin to the initial level. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-25pwm: jz4740: Apply configuration atomicallyPaul Cercueil1-25/+12
This is cleaner, more future-proof, and incidentally it also fixes the PWM resetting its config when stopped/started several times. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-25pwm: jz4740: Remove unused devicetree compatible stringsPaul Cercueil1-2/+0
Right now none of the Ingenic-based boards probe this driver from devicetree. This driver defined three compatible strings for the exact same behaviour. Before these strings are used, we can remove two of them. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-25dt-bindings: pwm: jz47xx: Remove unused compatible stringsPaul Cercueil1-4/+1
Right now none of the Ingenic-based boards probe this driver from devicetree. This driver defined three compatible strings for the exact same behaviour. Before these strings are used, we can remove two of them. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-25pwm: meson: Fix the G12A AO clock parents orderNeil Armstrong1-2/+11
The Amlogic G12A and G12B Documentation is wrong, the AO xtal and clk81 clock source order is reversed, and validated when adding DVFS support by using the PWM AO D output to control the CPU supply voltage. The vendor tree also uses the reversed xtal and clk81 order at [1]. [1] https://github.com/hardkernel/linux/blob/odroidn2-4.9.y/drivers/amlogic/pwm/pwm_meson.c#L462 Fixes: f41efceb46e6 ("pwm: meson: Add clock source configuration for Meson G12A") Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-25pwm: meson: Update with SPDX Licence identifierNeil Armstrong1-51/+1
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-25pwm: stm32: Use 3 cells ->of_xlate()Fabrice Gasnier1-0/+2
STM32 Timers support generic 3 cells PWM to encode PWM number, period and polarity. Fixes: 7edf7369205b ("pwm: Add driver for STM32 plaftorm") Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@st.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-25dt-bindings: pwm: stm32: Add #pwm-cellsFabrice Gasnier1-0/+3
STM32 Timers support generic 3 cells PWM bindings to encode PWM number, period and polarity as defined in pwm.txt. Fixes: cd9a99c2f8e8 ("dt-bindings: pwm: Add STM32 bindings") Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-25pwm: Add consumer device linkFabrice Gasnier2-5/+51
Add a device link between the PWM consumer and the PWM provider. This enforces the PWM user to get suspended before the PWM provider. It allows proper synchronization of suspend/resume sequences: the PWM user is responsible for properly stopping PWM, before the provider gets suspended: see [1]. Add the device link in: - of_pwm_get() - pwm_get() - devm_*pwm_get() variants as it requires a reference to the device for the PWM consumer. [1] https://lkml.org/lkml/2019/2/5/770 Suggested-by: Thierry Reding <thierry.reding@gmail.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-25pwm: stm32-lp: Add power management supportFabrice Gasnier1-0/+25
Add suspend/resume PM sleep ops. When going to low power, enforce the PWM channel isn't active. Let the PWM consumers disable it during their own suspend sequence. Only perform a check here, and handle the pinctrl states. See [1]. [1] https://lkml.org/lkml/2019/2/5/770 Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-25dt-bindings: pwm: stm32-lp: Document pin control sleep stateFabrice Gasnier1-3/+6
Add documentation for pin control sleep state on STM32 LPTimer PWM. Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-25pwm: sifive: Add a driver for SiFive SoC PWMYash Shah3-0/+351
Adds a PWM driver for PWM chip present in SiFive's HiFive Unleashed SoC. Signed-off-by: Wesley W. Terpstra <wesley@sifive.com> [Atish: Various fixes and code cleanup] Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Yash Shah <yash.shah@sifive.com> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-06-25pwm: sifive: Add DT documentation for SiFive PWM ControllerYash Shah1-0/+33
DT documentation for PWM controller added. Signed-off-by: Wesley W. Terpstra <wesley@sifive.com> [Atish: Compatible string update] Signed-off-by: Atish Patra <atish.patra@wdc.com> Signed-off-by: Yash Shah <yash.shah@sifive.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
2019-05-19Linux 5.2-rc1v5.2-rc1Linus Torvalds1-2/+2
2019-05-19Merge tag 'upstream-5.2-rc2' of ↵Linus Torvalds3-4/+8
git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs Pull UBIFS fixes from Richard Weinberger: - build errors wrt xattrs - mismerge which lead to a wrong Kconfig ifdef - missing endianness conversion * tag 'upstream-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs: ubifs: Convert xattr inum to host order ubifs: Use correct config name for encryption ubifs: Fix build error without CONFIG_UBIFS_FS_XATTR
2019-05-19Merge branch 'akpm' (patches from Andrew)Linus Torvalds10-257/+889
Merge yet more updates from Andrew Morton: "A few final bits: - large changes to vmalloc, yielding large performance benefits - tweak the console-flush-on-panic code - a few fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: panic: add an option to replay all the printk message in buffer initramfs: don't free a non-existent initrd fs/writeback.c: use rcu_barrier() to wait for inflight wb switches going into workqueue when umount mm/compaction.c: correct zone boundary handling when isolating pages from a pageblock mm/vmap: add DEBUG_AUGMENT_LOWEST_MATCH_CHECK macro mm/vmap: add DEBUG_AUGMENT_PROPAGATE_CHECK macro mm/vmalloc.c: keep track of free blocks for vmap allocation
2019-05-19Merge tag 'kbuild-v5.2-2' of ↵Linus Torvalds74-172/+178
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull more Kbuild updates from Masahiro Yamada: - remove unneeded use of cc-option, cc-disable-warning, cc-ldoption - exclude tracked files from .gitignore - re-enable -Wint-in-bool-context warning - refactor samples/Makefile - stop building immediately if syncconfig fails - do not sprinkle error messages when $(CC) does not exist - move arch/alpha/defconfig to the configs subdirectory - remove crappy header search path manipulation - add comment lines to .config to clarify the end of menu blocks - check uniqueness of module names (adding new warnings intentionally) * tag 'kbuild-v5.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (24 commits) kconfig: use 'else ifneq' for Makefile to improve readability kbuild: check uniqueness of module names kconfig: Terminate menu blocks with a comment in the generated config kbuild: add LICENSES to KBUILD_ALLDIRS kbuild: remove 'addtree' and 'flags' magic for header search paths treewide: prefix header search paths with $(srctree)/ media: prefix header search paths with $(srctree)/ media: remove unneeded header search paths alpha: move arch/alpha/defconfig to arch/alpha/configs/defconfig kbuild: terminate Kconfig when $(CC) or $(LD) is missing kbuild: turn auto.conf.cmd into a mandatory include file .gitignore: exclude .get_maintainer.ignore and .gitattributes kbuild: add all Clang-specific flags unconditionally kbuild: Don't try to add '-fcatch-undefined-behavior' flag kbuild: add some extra warning flags unconditionally kbuild: add -Wvla flag unconditionally arch: remove dangling asm-generic wrappers samples: guard sub-directories with CONFIG options kbuild: re-enable int-in-bool-context warning MAINTAINERS: kbuild: Add pattern for scripts/*vmlinux* ...
2019-05-19Merge branch 'i2c/for-next' of ↵Linus Torvalds3-13/+111
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "Some I2C core API additions which are kind of simple but enhance error checking for users a lot, especially by returning errno now. There are wrappers to still support the old API but it will be removed once all users are converted" * 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: core: add device-managed version of i2c_new_dummy i2c: core: improve return value handling of i2c_new_device and i2c_new_dummy
2019-05-19Merge tag 'ext4_for_linus_stable' of ↵Linus Torvalds13-65/+107
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 fixes from Ted Ts'o: "Some bug fixes, and an update to the URL's for the final version of Unicode 12.1.0" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: avoid panic during forced reboot due to aborted journal ext4: fix block validity checks for journal inodes using indirect blocks unicode: update to Unicode 12.1.0 final unicode: add missing check for an error return from utf8lookup() ext4: fix miscellaneous sparse warnings ext4: unsigned int compared against zero ext4: fix use-after-free in dx_release() ext4: fix data corruption caused by overlapping unaligned and aligned IO jbd2: fix potential double free ext4: zero out the unused memory region in the extent tree block
2019-05-19Merge tag '5.2-rc-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds8-51/+173
Pull cifs fixes from Steve French: "Minor cleanup and fixes, one for stable, four rdma (smbdirect) related. Also adds SEEK_HOLE support" * tag '5.2-rc-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: add support for SEEK_DATA and SEEK_HOLE Fixed https://bugzilla.kernel.org/show_bug.cgi?id=202935 allow write on the same file cifs: Allocate memory for all iovs in smb2_ioctl cifs: Don't match port on SMBDirect transport cifs:smbd Use the correct DMA direction when sending data cifs:smbd When reconnecting to server, call smbd_destroy() after all MIDs have been called cifs: use the right include for signal_pending() smb3: trivial cleanup to smb2ops.c cifs: cleanup smb2ops.c and normalize strings smb3: display session id in debug data
2019-05-19Merge branch 'perf-core-for-linus' of ↵Linus Torvalds94-214/+5414
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf tooling updates from Ingo Molnar: "perf.data: - Streaming compression of perf ring buffer into PERF_RECORD_COMPRESSED user space records, resulting in ~3-5x perf.data file size reduction on variety of tested workloads what saves storage space on larger server systems where perf.data size can easily reach several tens or even hundreds of GiBs, especially when profiling with DWARF-based stacks and tracing of context switches. perf record: - Improve -user-regs/intr-regs suggestions to overcome errors perf annotate: - Remove hist__account_cycles() from callback, speeding up branch processing (perf record -b) perf stat: - Add a 'percore' event qualifier, e.g.: -e cpu/event=0,umask=0x3,percore=1/, that sums up the event counts for both hardware threads in a core. We can already do this with --per-core, but it's often useful to do this together with other metrics that are collected per hardware thread. I.e. now its possible to do this per-event, and have it mixed with other events not aggregated by core. arm64: - Map Brahma-B53 CPUID to cortex-a53 events. - Add Cortex-A57 and Cortex-A72 events. csky: - Add DWARF register mappings for libdw, allowing --call-graph=dwarf to work on the C-SKY arch. x86: - Add support for recording and printing XMM registers, available, for instance, on Icelake. - Add uncore_upi (Intel's "Ultra Path Interconnect" events) JSON support. UPI replaced the Intel QuickPath Interconnect (QPI) in Xeon Skylake-SP. Intel PT: - Fix instructions sampling rate. - Timestamp fixes. - Improve exported-sql-viewer GUI, allowing, for instance, to copy'n'paste the trees, useful for e-mailing" * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (73 commits) perf stat: Support 'percore' event qualifier perf stat: Factor out aggregate counts printing perf tools: Add a 'percore' event qualifier perf docs: Add description for stderr perf intel-pt: Fix sample timestamp wrt non-taken branches perf intel-pt: Fix improved sample timestamp perf intel-pt: Fix instructions sampling rate perf regs x86: Add X86 specific arch__intr_reg_mask() perf parse-regs: Add generic support for arch__intr/user_reg_mask() perf parse-regs: Split parse_regs perf vendor events arm64: Add Cortex-A57 and Cortex-A72 events perf vendor events arm64: Map Brahma-B53 CPUID to cortex-a53 events perf vendor events arm64: Remove [[:xdigit:]] wildcard perf jevents: Remove unused variable perf test zstd: Fixup verbose mode output perf tests: Implement Zstd comp/decomp integration test perf inject: Enable COMPRESSED record decompression perf report: Implement perf.data record decompression perf record: Implement -z,--compression_level[=<n>] option perf report: Add stub processing of compressed events for -D ...
2019-05-19Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds12-136/+202
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull clocksource updates from Ingo Molnar: "Misc clocksource/clockevent driver updates that came in a bit late but are ready for v5.2" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: misc: atmel_tclib: Do not probe already used TCBs clocksource/drivers/timer-atmel-tcb: Convert tc_clksrc_suspend|resume() to static clocksource/drivers/tcb_clksrc: Rename the file for consistency clocksource/drivers/timer-atmel-pit: Rework Kconfig option clocksource/drivers/tcb_clksrc: Move Kconfig option ARM: at91: Implement clocksource selection clocksource/drivers/tcb_clksrc: Use tcb as sched_clock clocksource/drivers/tcb_clksrc: Stop depending on atmel_tclib ARM: at91: move SoC specific definitions to SoC folder clocksource/drivers/timer-milbeaut: Cleanup common register accesses clocksource/drivers/timer-milbeaut: Add shutdown function clocksource/drivers/timer-milbeaut: Fix to enable one-shot timer clocksource/drivers/tegra: Rework for compensation of suspend time clocksource/drivers/sp804: Add COMPILE_TEST to CONFIG_ARM_TIMER_SP804 clocksource/drivers/sun4i: Add a compatible for suniv dt-bindings: timer: Add Allwinner suniv timer
2019-05-19Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds38-229/+2511
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull IRQ chip updates from Ingo Molnar: "A late irqchips update: - New TI INTR/INTA set of drivers - Rewrite of the stm32mp1-exti driver as a platform driver - Update the IOMMU MSI mapping API to be RT friendly - A number of cleanups and other low impact fixes" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits) iommu/dma-iommu: Remove iommu_dma_map_msi_msg() irqchip/gic-v3-mbi: Don't map the MSI page in mbi_compose_m{b, s}i_msg() irqchip/ls-scfg-msi: Don't map the MSI page in ls_scfg_msi_compose_msg() irqchip/gic-v3-its: Don't map the MSI page in its_irq_compose_msi_msg() irqchip/gicv2m: Don't map the MSI page in gicv2m_compose_msi_msg() iommu/dma-iommu: Split iommu_dma_map_msi_msg() in two parts genirq/msi: Add a new field in msi_desc to store an IOMMU cookie arm64: arch_k3: Enable interrupt controller drivers irqchip/ti-sci-inta: Add msi domain support soc: ti: Add MSI domain bus support for Interrupt Aggregator irqchip/ti-sci-inta: Add support for Interrupt Aggregator driver dt-bindings: irqchip: Introduce TISCI Interrupt Aggregator bindings irqchip/ti-sci-intr: Add support for Interrupt Router driver dt-bindings: irqchip: Introduce TISCI Interrupt router bindings gpio: thunderx: Use the default parent apis for {request,release}_resources genirq: Introduce irq_chip_{request,release}_resource_parent() apis firmware: ti_sci: Add helper apis to manage resources firmware: ti_sci: Add RM mapping table for am654 firmware: ti_sci: Add support for IRQ management firmware: ti_sci: Add support for RM core ops ...
2019-05-19Merge branch 'efi-urgent-for-linus' of ↵Linus Torvalds1-2/+6
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI fix from Ingo Molnar: "Fix an EFI-fb regression that affects certain x86 systems" * 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: fbdev/efifb: Ignore framebuffer memmap entries that lack any memory types
2019-05-19Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds9-26/+27
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull core fixes from Ingo Molnar: "This fixes a particularly thorny munmap() bug with MPX, plus fixes a host build environment assumption in objtool" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Allow AR to be overridden with HOSTAR x86/mpx, mm/core: Fix recursive munmap() corruption
2019-05-19Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds25-124/+277
Pull ARM SoC late updates from Olof Johansson: "This is some material that we picked up into our tree late. Most of it are smaller fixes and additions, some defconfig updates due to recent development, etc. Code-wise the largest portion is a series of PM updates for the at91 platform, and those have been in linux-next a while through the at91 tree before we picked them up" * tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (29 commits) arm64: dts: sprd: Add clock properties for serial devices Opt out of scripts/get_maintainer.pl ARM: ixp4xx: Remove duplicated include from common.c soc: ixp4xx: qmgr: Fix an NULL vs IS_ERR() check in probe arm64: tegra: Disable XUSB support on Jetson TX2 arm64: tegra: Enable SMMU translation for PCI on Tegra186 arm64: tegra: Fix insecure SMMU users for Tegra186 arm64: tegra: Select ARM_GIC_PM amba: tegra-ahb: Mark PM functions as __maybe_unused ARM: dts: logicpd-som-lv: Fix MMC1 card detect ARM: mvebu: drop return from void function ARM: mvebu: prefix coprocessor operand with p ARM: mvebu: drop unnecessary label ARM: mvebu: fix a leaked reference by adding missing of_node_put ARM: socfpga_defconfig: enable LTC2497 ARM: mvebu: kirkwood: remove error message when retrieving mac address ARM: at91: sama5: make ov2640 as a module ARM: OMAP1: ams-delta: fix early boot crash when LED support is disabled ARM: at91: remove HAVE_FB_ATMEL for sama5 SoC as they use DRM soc/fsl/qe: Fix an error code in qe_pin_request() ...
2019-05-19Merge tag 'powerpc-5.2-2' of ↵Linus Torvalds4-5/+7
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: "One fix going back to stable, for a bug on 32-bit introduced when we added support for THREAD_INFO_IN_TASK. A fix for a typo in a recent rework of our hugetlb code that leads to crashes on 64-bit when using hugetlbfs with a 4K PAGE_SIZE. Two fixes for our recent rework of the address layout on 64-bit hash CPUs, both only triggered when userspace tries to access addresses outside the user or kernel address ranges. Finally a fix for a recently introduced double free in an error path in our cacheinfo code. Thanks to: Aneesh Kumar K.V, Christophe Leroy, Sachin Sant, Tobin C. Harding" * tag 'powerpc-5.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/cacheinfo: Remove double free powerpc/mm/hash: Fix get_region_id() for invalid addresses powerpc/mm: Drop VM_BUG_ON in get_region_id() powerpc/mm: Fix crashes with hugepages & 4K pages powerpc/32s: fix flush_hash_pages() on SMP
2019-05-19Merge tag 'mips_5.2_2' of ↵Linus Torvalds18-659/+831
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull a few more MIPS updates from Paul Burton: "Some SGI IP27 specific PCI rework and a batch of fixes: - A build fix for BMIPS5000 configurations with CONFIG_HW_PERF_EVENTS=y, which also neatly removes some #ifdefery. - A fix to report supported ISAs correctly on older Ingenic SoCs which incorrectly indicate MIPSr2 support in their cop0 Config register. - Some PCI modernization for SGI IP27 systems as part of ongoing work to support some other SGI systems. - A fix allowing use of appended DTB files with generic kernels. - DMA mask fixes for SGI IP22 & Alchemy systems" * tag 'mips_5.2_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: Alchemy: add DMA masks for on-chip ethernet MIPS: SGI-IP22: provide missing dma_mask/coherent_dma_mask generic: fix appended dtb support MIPS: SGI-IP27: abstract chipset irq from bridge MIPS: SGI-IP27: use generic PCI driver MIPS: Fix Ingenic SoCs sometimes reporting wrong ISA MIPS: perf: Fix build with CONFIG_CPU_BMIPS5000 enabled
2019-05-19Merge tag 'riscv-for-linus-5.2-mw2' of ↵Linus Torvalds36-321/+635
git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux Pull RISC-V updates from Palmer Dabbelt: "This contains an assortment of RISC-V related patches that I'd like to target for the 5.2 merge window. Most of the patches are cleanups, but there are a handful of user-visible changes: - The nosmp and nr_cpus command-line arguments are now supported, which work like normal. - The SBI console no longer installs itself as a preferred console, we rely on standard mechanisms (/chosen, command-line, hueristics) instead. - sfence_remove_sfence_vma{,_asid} now pass their arguments along to the SBI call. - Modules now support BUG(). - A missing sfence.vma during boot has been added. This bug only manifests during boot. - The arch/riscv support for SiFive's L2 cache controller has been merged, which should un-block the EDAC framework work. I've only tested this on QEMU again, as I didn't have time to get things running on the Unleashed. The latest master from this morning merges in cleanly and passes the tests as well" * tag 'riscv-for-linus-5.2-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux: (31 commits) riscv: fix locking violation in page fault handler RISC-V: sifive_l2_cache: Add L2 cache controller driver for SiFive SoCs RISC-V: Add DT documentation for SiFive L2 Cache Controller RISC-V: Avoid using invalid intermediate translations riscv: Support BUG() in kernel module riscv: Add the support for c.ebreak check in is_valid_bugaddr() riscv: support trap-based WARN() riscv: fix sbi_remote_sfence_vma{,_asid}. riscv: move switch_mm to its own file riscv: move flush_icache_{all,mm} to cacheflush.c tty: Don't force RISCV SBI console as preferred console RISC-V: Access CSRs using CSR numbers RISC-V: Add interrupt related SCAUSE defines in asm/csr.h RISC-V: Use tabs to align macro values in asm/csr.h RISC-V: Fix minor checkpatch issues. RISC-V: Support nr_cpus command line option. RISC-V: Implement nosmp commandline option. RISC-V: Add RISC-V specific arch_match_cpu_phys_id riscv: vdso: drop unnecessary cc-ldoption riscv: call pm_power_off from machine_halt / machine_power_off ...
2019-05-19kconfig: use 'else ifneq' for Makefile to improve readabilityMasahiro Yamada1-3/+1
'ifeq ... else ifneq ... endif' notation is supported by GNU Make 3.81 or later, which is the requirement for building the kernel since commit 37d69ee30808 ("docs: bump minimal GNU Make version to 3.81"). Use it to improve the readability. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-05-18panic: add an option to replay all the printk message in bufferFeng Tang5-4/+24
Currently on panic, kernel will lower the loglevel and print out pending printk msg only with console_flush_on_panic(). Add an option for users to configure the "panic_print" to replay all dmesg in buffer, some of which they may have never seen due to the loglevel setting, which will help panic debugging . [feng.tang@intel.com: keep the original console_flush_on_panic() inside panic()] Link: http://lkml.kernel.org/r/1556199137-14163-1-git-send-email-feng.tang@intel.com [feng.tang@intel.com: use logbuf lock to protect the console log index] Link: http://lkml.kernel.org/r/1556269868-22654-1-git-send-email-feng.tang@intel.com Link: http://lkml.kernel.org/r/1556095872-36838-1-git-send-email-feng.tang@intel.com Signed-off-by: Feng Tang <feng.tang@intel.com> Reviewed-by: Petr Mladek <pmladek@suse.com> Cc: Aaro Koskinen <aaro.koskinen@nokia.com> Cc: Petr Mladek <pmladek@suse.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com> Cc: Kees Cook <keescook@chromium.org> Cc: Borislav Petkov <bp@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-18initramfs: don't free a non-existent initrdSteven Price1-1/+1
Since commit 54c7a8916a88 ("initramfs: free initrd memory if opening /initrd.image fails"), the kernel has unconditionally attempted to free the initrd even if it doesn't exist. In the non-existent case this causes a boot-time splat if CONFIG_DEBUG_VIRTUAL is enabled due to a call to virt_to_phys() with a NULL address. Instead we should check that the initrd actually exists and only attempt to free it if it does. Link: http://lkml.kernel.org/r/20190516143125.48948-1-steven.price@arm.com Fixes: 54c7a8916a88 ("initramfs: free initrd memory if opening /initrd.image fails") Signed-off-by: Steven Price <steven.price@arm.com> Reported-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-18fs/writeback.c: use rcu_barrier() to wait for inflight wb switches going ↵Jiufei Xue1-3/+8
into workqueue when umount synchronize_rcu() didn't wait for call_rcu() callbacks, so inode wb switch may not go to the workqueue after synchronize_rcu(). Thus previous scheduled switches was not finished even flushing the workqueue, which will cause a NULL pointer dereferenced followed below. VFS: Busy inodes after unmount of vdd. Self-destruct in 5 seconds. Have a nice day... BUG: unable to handle kernel NULL pointer dereference at 0000000000000278 evict+0xb3/0x180 iput+0x1b0/0x230 inode_switch_wbs_work_fn+0x3c0/0x6a0 worker_thread+0x4e/0x490 ? process_one_work+0x410/0x410 kthread+0xe6/0x100 ret_from_fork+0x39/0x50 Replace the synchronize_rcu() call with a rcu_barrier() to wait for all pending callbacks to finish. And inc isw_nr_in_flight after call_rcu() in inode_switch_wbs() to make more sense. Link: http://lkml.kernel.org/r/20190429024108.54150-1-jiufei.xue@linux.alibaba.com Signed-off-by: Jiufei Xue <jiufei.xue@linux.alibaba.com> Acked-by: Tejun Heo <tj@kernel.org> Suggested-by: Tejun Heo <tj@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-18mm/compaction.c: correct zone boundary handling when isolating pages from a ↵Mel Gorman1-2/+2
pageblock syzbot reported the following error from a tree with a head commit of baf76f0c58ae ("slip: make slhc_free() silently accept an error pointer") BUG: unable to handle kernel paging request at ffffea0003348000 #PF error: [normal kernel read fault] PGD 12c3f9067 P4D 12c3f9067 PUD 12c3f8067 PMD 0 Oops: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 28916 Comm: syz-executor.2 Not tainted 5.1.0-rc6+ #89 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:constant_test_bit arch/x86/include/asm/bitops.h:314 [inline] RIP: 0010:PageCompound include/linux/page-flags.h:186 [inline] RIP: 0010:isolate_freepages_block+0x1c0/0xd40 mm/compaction.c:579 Code: 01 d8 ff 4d 85 ed 0f 84 ef 07 00 00 e8 29 00 d8 ff 4c 89 e0 83 85 38 ff ff ff 01 48 c1 e8 03 42 80 3c 38 00 0f 85 31 0a 00 00 <4d> 8b 2c 24 31 ff 49 c1 ed 10 41 83 e5 01 44 89 ee e8 3a 01 d8 ff RSP: 0018:ffff88802b31eab8 EFLAGS: 00010246 RAX: 1ffffd4000669000 RBX: 00000000000cd200 RCX: ffffc9000a235000 RDX: 000000000001ca5e RSI: ffffffff81988cc7 RDI: 0000000000000001 RBP: ffff88802b31ebd8 R08: ffff88805af700c0 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffea0003348000 R13: 0000000000000000 R14: ffff88802b31f030 R15: dffffc0000000000 FS: 00007f61648dc700(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffea0003348000 CR3: 0000000037c64000 CR4: 00000000001426e0 Call Trace: fast_isolate_around mm/compaction.c:1243 [inline] fast_isolate_freepages mm/compaction.c:1418 [inline] isolate_freepages mm/compaction.c:1438 [inline] compaction_alloc+0x1aee/0x22e0 mm/compaction.c:1550 There is no reproducer and it is difficult to hit -- 1 crash every few days. The issue is very similar to the fix in commit 6b0868c820ff ("mm/compaction.c: correct zone boundary handling when resetting pageblock skip hints"). When isolating free pages around a target pageblock, the boundary handling is off by one and can stray into the next pageblock. Triggering the syzbot error requires that the end of pageblock is section or zone aligned, and that the next section is unpopulated. A more subtle consequence of the bug is that pageblocks were being improperly used as migration targets which potentially hurts fragmentation avoidance in the long-term one page at a time. A debugging patch revealed that it's definitely possible to stray outside of a pageblock which is not intended. While syzbot cannot be used to verify this patch, it was confirmed that the debugging warning no longer triggers with this patch applied. It has also been confirmed that the THP allocation stress tests are not degraded by this patch. Link: http://lkml.kernel.org/r/20190510182124.GI18914@techsingularity.net Fixes: e332f741a8dd ("mm, compaction: be selective about what pageblocks to clear skip hints") Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Reported-by: syzbot+d84c80f9fe26a0f7a734@syzkaller.appspotmail.com Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Qian Cai <cai@lca.pw> Cc: Michal Hocko <mhocko@suse.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> # v5.1+ Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-18mm/vmap: add DEBUG_AUGMENT_LOWEST_MATCH_CHECK macroUladzislau Rezki (Sony)1-0/+43
This macro adds some debug code to check that vmap allocations are happened in ascending order. By default this option is set to 0 and not active. It requires recompilation of the kernel to activate it. Set to 1, compile the kernel. [urezki@gmail.com: v4] Link: http://lkml.kernel.org/r/20190406183508.25273-4-urezki@gmail.com Link: http://lkml.kernel.org/r/20190402162531.10888-4-urezki@gmail.com Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com> Reviewed-by: Roman Gushchin <guro@fb.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Joel Fernandes <joelaf@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Oleksiy Avramchenko <oleksiy.avramchenko@sonymobile.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Garnier <thgarnie@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-18mm/vmap: add DEBUG_AUGMENT_PROPAGATE_CHECK macroUladzislau Rezki (Sony)1-0/+48
This macro adds some debug code to check that the augment tree is maintained correctly, meaning that every node contains valid subtree_max_size value. By default this option is set to 0 and not active. It requires recompilation of the kernel to activate it. Set to 1, compile the kernel. [urezki@gmail.com: v4] Link: http://lkml.kernel.org/r/20190406183508.25273-3-urezki@gmail.com Link: http://lkml.kernel.org/r/20190402162531.10888-3-urezki@gmail.com Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com> Reviewed-by: Roman Gushchin <guro@fb.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Joel Fernandes <joelaf@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Oleksiy Avramchenko <oleksiy.avramchenko@sonymobile.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Garnier <thgarnie@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-18mm/vmalloc.c: keep track of free blocks for vmap allocationUladzislau Rezki (Sony)2-247/+763
Patch series "improve vmap allocation", v3. Objective --------- Please have a look for the description at: https://lkml.org/lkml/2018/10/19/786 but let me also summarize it a bit here as well. The current implementation has O(N) complexity. Requests with different permissive parameters can lead to long allocation time. When i say "long" i mean milliseconds. Description ----------- This approach organizes the KVA memory layout into free areas of the 1-ULONG_MAX range, i.e. an allocation is done over free areas lookups, instead of finding a hole between two busy blocks. It allows to have lower number of objects which represent the free space, therefore to have less fragmented memory allocator. Because free blocks are always as large as possible. It uses the augment tree where all free areas are sorted in ascending order of va->va_start address in pair with linked list that provides O(1) access to prev/next elements. Since the tree is augment, we also maintain the "subtree_max_size" of VA that reflects a maximum available free block in its left or right sub-tree. Knowing that, we can easily traversal toward the lowest (left most path) free area. Allocation: ~O(log(N)) complexity. It is sequential allocation method therefore tends to maximize locality. The search is done until a first suitable block is large enough to encompass the requested parameters. Bigger areas are split. I copy paste here the description of how the area is split, since i described it in https://lkml.org/lkml/2018/10/19/786 <snip> A free block can be split by three different ways. Their names are FL_FIT_TYPE, LE_FIT_TYPE/RE_FIT_TYPE and NE_FIT_TYPE, i.e. they correspond to how requested size and alignment fit to a free block. FL_FIT_TYPE - in this case a free block is just removed from the free list/tree because it fully fits. Comparing with current design there is an extra work with rb-tree updating. LE_FIT_TYPE/RE_FIT_TYPE - left/right edges fit. In this case what we do is just cutting a free block. It is as fast as a current design. Most of the vmalloc allocations just end up with this case, because the edge is always aligned to 1. NE_FIT_TYPE - Is much less common case. Basically it happens when requested size and alignment does not fit left nor right edges, i.e. it is between them. In this case during splitting we have to build a remaining left free area and place it back to the free list/tree. Comparing with current design there are two extra steps. First one is we have to allocate a new vmap_area structure. Second one we have to insert that remaining free block to the address sorted list/tree. In order to optimize a first case there is a cache with free_vmap objects. Instead of allocating from slab we just take an object from the cache and reuse it. Second one is pretty optimized. Since we know a start point in the tree we do not do a search from the top. Instead a traversal begins from a rb-tree node we split. <snip> De-allocation. ~O(log(N)) complexity. An area is not inserted straight away to the tree/list, instead we identify the spot first, checking if it can be merged around neighbors. The list provides O(1) access to prev/next, so it is pretty fast to check it. Summarizing. If merged then large coalesced areas are created, if not the area is just linked making more fragments. There is one more thing that i should mention here. After modification of VA node, its subtree_max_size is updated if it was/is the biggest area in its left or right sub-tree. Apart of that it can also be populated back to upper levels to fix the tree. For more details please have a look at the __augment_tree_propagate_from() function and the description. Tests and stressing ------------------- I use the "test_vmalloc.sh" test driver available under "tools/testing/selftests/vm/" since 5.1-rc1 kernel. Just trigger "sudo ./test_vmalloc.sh" to find out how to deal with it. Tested on different platforms including x86_64/i686/ARM64/x86_64_NUMA. Regarding last one, i do not have any physical access to NUMA system, therefore i emulated it. The time of stressing is days. If you run the test driver in "stress mode", you also need the patch that is in Andrew's tree but not in Linux 5.1-rc1. So, please apply it: http://git.cmpxchg.org/cgit.cgi/linux-mmotm.git/commit/?id=e0cf7749bade6da318e98e934a24d8b62fab512c After massive testing, i have not identified any problems like memory leaks, crashes or kernel panics. I find it stable, but more testing would be good. Performance analysis -------------------- I have used two systems to test. One is i5-3320M CPU @ 2.60GHz and another is HiKey960(arm64) board. i5-3320M runs on 4.20 kernel, whereas Hikey960 uses 4.15 kernel. I have both system which could run on 5.1-rc1 as well, but the results have not been ready by time i an writing this. Currently it consist of 8 tests. There are three of them which correspond to different types of splitting(to compare with default). We have 3 ones(see above). Another 5 do allocations in different conditions. a) sudo ./test_vmalloc.sh performance When the test driver is run in "performance" mode, it runs all available tests pinned to first online CPU with sequential execution test order. We do it in order to get stable and repeatable results. Take a look at time difference in "long_busy_list_alloc_test". It is not surprising because the worst case is O(N). # i5-3320M How many cycles all tests took: CPU0=646919905370(default) cycles vs CPU0=193290498550(patched) cycles # See detailed table with results here: ftp://vps418301.ovh.net/incoming/vmap_test_results_v2/i5-3320M_performance_default.txt ftp://vps418301.ovh.net/incoming/vmap_test_results_v2/i5-3320M_performance_patched.txt # Hikey960 8x CPUs How many cycles all tests took: CPU0=3478683207 cycles vs CPU0=463767978 cycles # See detailed table with results here: ftp://vps418301.ovh.net/incoming/vmap_test_results_v2/HiKey960_performance_default.txt ftp://vps418301.ovh.net/incoming/vmap_test_results_v2/HiKey960_performance_patched.txt b) time sudo ./test_vmalloc.sh test_repeat_count=1 With this configuration, all tests are run on all available online CPUs. Before running each CPU shuffles its tests execution order. It gives random allocation behaviour. So it is rough comparison, but it puts in the picture for sure. # i5-3320M <default> vs <patched> real 101m22.813s real 0m56.805s user 0m0.011s user 0m0.015s sys 0m5.076s sys 0m0.023s # See detailed table with results here: ftp://vps418301.ovh.net/incoming/vmap_test_results_v2/i5-3320M_test_repeat_count_1_default.txt ftp://vps418301.ovh.net/incoming/vmap_test_results_v2/i5-3320M_test_repeat_count_1_patched.txt # Hikey960 8x CPUs <default> vs <patched> real unknown real 4m25.214s user unknown user 0m0.011s sys unknown sys 0m0.670s I did not manage to complete this test on "default Hikey960" kernel version. After 24 hours it was still running, therefore i had to cancel it. That is why real/user/sys are "unknown". This patch (of 3): Currently an allocation of the new vmap area is done over busy list iteration(complexity O(n)) until a suitable hole is found between two busy areas. Therefore each new allocation causes the list being grown. Due to over fragmented list and different permissive parameters an allocation can take a long time. For example on embedded devices it is milliseconds. This patch organizes the KVA memory layout into free areas of the 1-ULONG_MAX range. It uses an augment red-black tree that keeps blocks sorted by their offsets in pair with linked list keeping the free space in order of increasing addresses. Nodes are augmented with the size of the maximum available free block in its left or right sub-tree. Thus, that allows to take a decision and traversal toward the block that will fit and will have the lowest start address, i.e. it is sequential allocation. Allocation: to allocate a new block a search is done over the tree until a suitable lowest(left most) block is large enough to encompass: the requested size, alignment and vstart point. If the block is bigger than requested size - it is split. De-allocation: when a busy vmap area is freed it can either be merged or inserted to the tree. Red-black tree allows efficiently find a spot whereas a linked list provides a constant-time access to previous and next blocks to check if merging can be done. In case of merging of de-allocated memory chunk a large coalesced area is created. Complexity: ~O(log(N)) [urezki@gmail.com: v3] Link: http://lkml.kernel.org/r/20190402162531.10888-2-urezki@gmail.com [urezki@gmail.com: v4] Link: http://lkml.kernel.org/r/20190406183508.25273-2-urezki@gmail.com Link: http://lkml.kernel.org/r/20190321190327.11813-2-urezki@gmail.com Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com> Reviewed-by: Roman Gushchin <guro@fb.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Thomas Garnier <thgarnie@google.com> Cc: Oleksiy Avramchenko <oleksiy.avramchenko@sonymobile.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Joel Fernandes <joelaf@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-18Merge tag 'perf-core-for-mingo-5.2-20190517' of ↵Ingo Molnar94-214/+5414
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: perf.data: Alexey Budankov: - Streaming compression of perf ring buffer into PERF_RECORD_COMPRESSED user space records, resulting in ~3-5x perf.data file size reduction on variety of tested workloads what saves storage space on larger server systems where perf.data size can easily reach several tens or even hundreds of GiBs, especially when profiling with DWARF-based stacks and tracing of context switches. perf record: Arnaldo Carvalho de Melo - Improve -user-regs/intr-regs suggestions to overcome errors. perf annotate: Jin Yao: - Remove hist__account_cycles() from callback, speeding up branch processing (perf record -b). perf stat: - Add a 'percore' event qualifier, e.g.: -e cpu/event=0,umask=0x3,percore=1/, that sums up the event counts for both hardware threads in a core. We can already do this with --per-core, but it's often useful to do this together with other metrics that are collected per hardware thread. I.e. now its possible to do this per-event, and have it mixed with other events not aggregated by core. core libraries: Donald Yandt: - Check for errors when doing fgets(/proc/version). Jiri Olsa: - Speed up report for perf compiled with linbunwind. tools headers: Arnaldo Carvalho de Melo - Update memcpy_64.S, x86's kvm.h and pt_regs.h. arm64: Florian Fainelli: - Map Brahma-B53 CPUID to cortex-a53 events. - Add Cortex-A57 and Cortex-A72 events. csky: Mao Han: - Add DWARF register mappings for libdw, allowing --call-graph=dwarf to work on the C-SKY arch. x86: Andi Kleen/Kan Liang: - Add support for recording and printing XMM registers, available, for instance, on Icelake. Kan Liang: - Add uncore_upi (Intel's "Ultra Path Interconnect" events) JSON support. UPI replaced the Intel QuickPath Interconnect (QPI) in Xeon Skylake-SP. Intel PT: Adrian Hunter . Fix instructions sampling rate. . Timestamp fixes. . Improve exported-sql-viewer GUI, allowing, for instance, to copy'n'paste the trees, useful for e-mailing. Documentation: Thomas Richter: - Add description for 'perf --debug stderr=1', which redirects stderr to stdout. libtraceevent: Tzvetomir Stoyanov: - Add man pages for the various APIs. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-05-18kbuild: check uniqueness of module namesMasahiro Yamada2-0/+17
In the recent build test of linux-next, Stephen saw a build error caused by a broken .tmp_versions/*.mod file: https://lkml.org/lkml/2019/5/13/991 drivers/net/phy/asix.ko and drivers/net/usb/asix.ko have the same basename, and there is a race in generating .tmp_versions/asix.mod Kbuild has not checked this before, and it suddenly shows up with obscure error messages when this kind of race occurs. Non-unique module names cause various sort of problems, but it is not trivial to catch them by eyes. Hence, this script. It checks not only real modules, but also built-in modules (i.e. controlled by tristate CONFIG option, but currently compiled with =y). Non-unique names for built-in modules also cause problems because /sys/modules/ would fall over. For the latest kernel, I tested "make allmodconfig all" (or more quickly "make allyesconfig modules"), and it detected the following: warning: same basename if the following are built as modules: drivers/regulator/88pm800.ko drivers/mfd/88pm800.ko warning: same basename if the following are built as modules: drivers/gpu/drm/bridge/adv7511/adv7511.ko drivers/media/i2c/adv7511.ko warning: same basename if the following are built as modules: drivers/net/phy/asix.ko drivers/net/usb/asix.ko warning: same basename if the following are built as modules: fs/coda/coda.ko drivers/media/platform/coda/coda.ko warning: same basename if the following are built as modules: drivers/net/phy/realtek.ko drivers/net/dsa/realtek.ko Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
2019-05-18kconfig: Terminate menu blocks with a comment in the generated configAlexander Popov1-1/+12
Currently menu blocks start with a pretty header but end with nothing in the generated config. So next config options stick together with the options from the menu block. Let's terminate menu blocks in the generated config with a comment and a newline if needed. Example: ... CONFIG_BPF_STREAM_PARSER=y CONFIG_NET_FLOW_LIMIT=y # # Network testing # CONFIG_NET_PKTGEN=y CONFIG_NET_DROP_MONITOR=y # end of Network testing # end of Networking options CONFIG_HAMRADIO=y ... Signed-off-by: Alexander Popov <alex.popov@linux.com> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-05-18kbuild: add LICENSES to KBUILD_ALLDIRSMasahiro Yamada1-1/+1
For *-pkg targets, the LICENSES directory should be included in the source tarball. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-05-18kbuild: remove 'addtree' and 'flags' magic for header search pathsMasahiro Yamada3-33/+13
The 'addtree' and 'flags' in scripts/Kbuild.include are so compilecated and ugly. As I mentioned in [1], Kbuild should stop automatic prefixing of header search path options. I fixed up (almost) all Makefiles in the kernel. Now 'addtree' and 'flags' have been removed. Kbuild still caters to add $(srctree)/$(src) and $(objtree)/$(obj) to the header search path for O= building, but never touches extra compiler options from ccflags-y etc. [1]: https://patchwork.kernel.org/patch/9632347/ Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-18 06:46:56 +0000