summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2009-01-16Merge branch 'misc' into releaseLen Brown12-10/+23
2009-01-16Merge branch 'thinkpad-acpi' into releaseLen Brown3-155/+791
2009-01-16Merge branches 'bugzilla-11884' and 'bugzilla-8544' into releaseLen Brown2-47/+42
2009-01-16ACPI: rename main.c to sleep.cLen Brown2-1/+1
Signed-off-by: Len Brown <len.brown@intel.com>
2009-01-16dell-laptop: move to drivers/platform/x86/ from drivers/misc/Len Brown4-2/+14
Signed-off-by: Len Brown <len.brown@intel.com>
2009-01-16eeepc-laptop: enable Bluetooth ACPI detailsJonathan McDowell1-2/+2
Although rfkill support for the EEE bluetooth device has been added to 2.6.28-rc the appropriate ACPI accessor definitions were not added, so the support was non functional. The patch below adds the get and set accessors and has been verified to work on an EEE 901. Signed-off-by: Jonathan McDowell <noodles@earth.li> Acked-by: Matthew Garrett <mjg@redhat.com> Acked-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Len Brown <len.brown@intel.com>
2009-01-16ACPI: fix ACPI_FADT_S4_RTC_WAKE commentDavid Brownell1-1/+1
Make the comment for ACPI_FADT_S4_RTC_WAKE match the ACPI spec; that bit has nothing to do with status bits. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Len Brown <len.brown@intel.com>
2009-01-16kprobes: check CONFIG_FREEZER instead of CONFIG_PMMasami Hiramatsu3-3/+3
Check CONFIG_FREEZER instead of CONFIG_PM because kprobe booster depends on freeze_processes() and thaw_processes() when CONFIG_PREEMPT=y. This fixes a linkage error which occurs when CONFIG_PREEMPT=y, CONFIG_PM=y and CONFIG_FREEZER=n. Reported-by: Cheng Renquan <crquan@gmail.com> Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Len Brown <len.brown@intel.com>
2009-01-16PM: Fix freezer compilation if PM_SLEEP is unsetRafael J. Wysocki1-1/+2
Freezer fails to compile if with the following configuration settings: CONFIG_CGROUPS=y CONFIG_CGROUP_FREEZER=y CONFIG_MODULES=y CONFIG_FREEZER=y CONFIG_PM=y CONFIG_PM_SLEEP=n Fix this by making process.o compilation depend on CONFIG_FREEZER. Reported-by: Cheng Renquan <crquan@gmail.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Len Brown <len.brown@intel.com>
2009-01-16thermal fixup for broken BIOS which has invalid trip points.Zhang Rui1-4/+12
ACPI thermal driver only re-evaluate VALID trip points. For the broken BIOS show in http://bugzilla.kernel.org/show_bug.cgi?id=8544 the active[0] is set to invalid at boot time and it will not be re-evaluated again. We can still get a single warning message at boot time. http://marc.info/?l=linux-kernel&m=120496222629983&w=2 http://bugzilla.kernel.org/show_bug.cgi?id=12203 Signed-off-by: Zhang Rui<rui.zhang@intel.com> Tested-by: Márton Németh <nm127@freemail.hu> Signed-off-by: Len Brown <len.brown@intel.com>
2009-01-16ACPI: EC: Don't trust ECDT tables from ASUSAlexey Starikovskiy1-44/+30
http://bugzilla.kernel.org/show_bug.cgi?id=9399 http://bugzilla.kernel.org/show_bug.cgi?id=11880 Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2009-01-16ACPI: EC: Limit workaround for ASUS notebooks even moreAlexey Starikovskiy1-1/+2
References: http://bugzilla.kernel.org/show_bug.cgi?id=11884 Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2009-01-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstableLinus Torvalds3-7/+11
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable: Btrfs: fix ioctl arg size (userland incompatible change!) Btrfs: Clear the device->running_pending flag before bailing on congestion
2009-01-16Btrfs: fix ioctl arg size (userland incompatible change!)Chris Mason2-7/+10
The structure used to send device in btrfs ioctl calls was not properly aligned, and so 32 bit ioctls would not work properly on 64 bit kernels. We could fix this with compat ioctls, but we're just one byte away and it doesn't make sense at this stage to carry about the compat ioctls forever at this stage in the project. This patch brings the ioctl arg up to an evenly aligned 4k. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-01-16Btrfs: Clear the device->running_pending flag before bailing on congestionChris Mason1-0/+1
Btrfs maintains a queue of async bio submissions so the checksumming threads don't have to wait on get_request_wait. In order to avoid extra wakeups, this code has a running_pending flag that is used to tell new submissions they don't need to wake the thread. When the threads notice congestion on a single device, they may decide to requeue the job and move on to other devices. This makes sure the running_pending flag is cleared before the job is requeued. It should help avoid IO stalls by making sure the task is woken up when new submissions come in. Signed-off-by: Chris Mason <chris.mason@oracle.com>
2009-01-16Merge branch 'merge' of ↵Linus Torvalds24-168/+196
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: serial: Add 16850 uart type support to OF uart driver hvc_console: Remove tty->low_latency powerpc: Get the number of SLBs from "slb-size" property powerpc: is_hugepage_only_range() must account for both 4kB and 64kB slices powerpc/ps3: printing fixups for l64 to ll64 conversion drivers/video powerpc/ps3: Printing fixups for l64 to ll64 conversion drivers/scsi powerpc/ps3: Printing fixups for l64 to ll64 conversion drivers/ps3 powerpc/ps3: Printing fixups for l64 to ll64 conversion sound/ppc powerpc/ps3: Printing fixups for l64 to ll64 conversion drivers/char powerpc/ps3: Printing fixups for l64 to ll64 conversion drivers/block powerpc/ps3: Printing fixups for l64 to ll64 conversion arch/powerpc powerpc/ps3: ps3_repository_read_mm_info() takes u64 * arguments powerpc/ps3: clear_bit()/set_bit() operate on unsigned longs powerpc/ps3: The lv1_ routines have u64 parameters powerpc/ps3: Use dma_addr_t down through the stack powerpc/ps3: set_dabr() takes an unsigned long powerpc: Cleanup from l64 to ll64 change drivers/scsi
2009-01-16Merge branch 'upstream-linus' of ↵Linus Torvalds12-79/+1065
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: sata_fsl: Return non-zero on error in probe() drivers/ata/pata_ali.c: s/isa_bridge/ali_isa_bridge/ to fix alpha build libata: New driver for OCTEON SOC Compact Flash interface (v7). libata: Add another column to the ata_timing table. sata_via: Add VT8261 support pata_atiixp: update port enabledness test handling [libata] get-identity ioctl: Fix use of invalid memory pointer
2009-01-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds24-95/+318
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] Skip deleted devices in __scsi_device_lookup_by_target() [SCSI] Add SUN Universal Xport to no attach blacklist [SCSI] iscsi_tcp: make padbuf non-static [SCSI] mpt fusion: Add Firmware debug support [SCSI] mpt fusion: Add separate msi enable disable for FC,SPI,SAS [SCSI] mpt fusion: Update MPI Headers to version 01.05.19 [SCSI] qla2xxx: Fix ISP restart bug in multiq code
2009-01-16Merge branch 'drm-next' of ↵Linus Torvalds10-69/+406
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/i915: lock correct mutex around object unreference. drm/i915: add support for physical memory objects drm/i915: make LVDS fixed mode a preferred mode drm: handle depth & bpp changes correctly drm: initial KMS config fixes drm/i915: setup sarea properly in master_priv drm/i915: set vblank enabled flag correctly across IRQ install/uninstall drm/i915: don't enable vblanks on disabled pipes
2009-01-16Revert "PCI PM: Register power state of devices during initialization"Linus Torvalds1-6/+2
This reverts commit 98e6e286d7b01deb7453b717aa38ebb69d6cefc0, as Yinghai Lu reports that it breaks kexec with at least the e1000 and e1000e drivers. The reason is that the shutdown sequence puts the hardware into D3 sleep, and the commit causes us to claim that it then is in D0 (running) state just because we don't understand the PM capabilities. Which then later makes "pci_set_power_state()" not do anything, and the device never wakes up properly and just returns 0xff to everything. Reported-by: Yinghai Lu <yinghai@kernel.org> Acked-by: From: Rafael J. Wysocki <rjw@sisk.pl> Cc: Jesse Barnes <jesse.barnes@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-16sata_fsl: Return non-zero on error in probe()Michal Sojka1-1/+1
while I was looking over kernel sources I've found this small bug. Formerly, zero was returned even if an error happened. Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-01-16drivers/ata/pata_ali.c: s/isa_bridge/ali_isa_bridge/ to fix alpha buildAndrew Morton1-14/+14
drivers/ata/pata_ali.c:44: error: static declaration of 'isa_bridge' follows non-static declaration arch/alpha/include/asm/pci.h:274: error: previous declaration of 'isa_bridge' was here Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-01-16libata: New driver for OCTEON SOC Compact Flash interface (v7).David Daney3-0/+975
Cavium OCTEON processor support was recently merged, so now we have this CF driver for your consideration. Most OCTEON variants have *no* DMA or interrupt support on the CF interface so for these, only PIO is supported. Although if DMA is available, we do take advantage of it. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-01-16libata: Add another column to the ata_timing table.David Daney2-38/+43
The forthcoming OCTEON SOC Compact Flash driver needs an additional timing value that was not available in the ata_timing table. I add a new column for dmack_hold time. The values were obtained from the Compact Flash specification Rev 4.1. Signed-off-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-01-16sata_via: Add VT8261 supportJosephChan@via.com.tw1-0/+2
Signed-off-by: Joseph Chan <josephchan@via.com.tw> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-01-16pata_atiixp: update port enabledness test handlingTejun Heo1-19/+13
Port enabledness test fits much better into init_one() instead of pre_reset(). The reason why these tests are in pre_reset() is purely historical at this point. Move it to init_one(). This will help further changes. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-01-16[libata] get-identity ioctl: Fix use of invalid memory pointerJeff Garzik5-7/+17
for SAS drivers. Caught by Ke Wei (and team?) at Marvell. Also, move the ata_scsi_ioctl export to libata-scsi.c, as that seems to be the general trend. Acked-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-01-16drm/i915: lock correct mutex around object unreference.Dave Airlie1-6/+11
This makes sure the mutex is held around the unreference. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-01-16drm/i915: add support for physical memory objectsDave Airlie4-13/+233
This is an initial patch to do support for objects which needs physical contiguous main ram, cursors and overlay registers on older chipsets. These objects are bound on cursor bin, like pinning, and we copy the data to/from the backing store object into the real one on attach/detach. notes: possible over the top in attach/detach operations. no overlay support yet. Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-01-16drm/i915: make LVDS fixed mode a preferred modeJesse Barnes1-0/+7
The detected fixed panel mode really is preferred, so mark it as such and add it to the LVDS connector mode list. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-01-16drm: handle depth & bpp changes correctlyJesse Barnes2-15/+35
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-01-16drm: initial KMS config fixesJesse Barnes3-36/+95
When mode setting is first initialized, the driver will call into drm_helper_initial_config() to set up an initial output and framebuffer configuration. This routine is responsible for probing the available connectors, encoders, and crtcs, looking for modes and putting together something reasonable (where reasonable is defined as "allows kernel messages to be visible on as many displays as possible"). However, the code was a bit too aggressive in setting default modes when none were found on a given connector. Even if some connectors had modes, any connectors found lacking modes would have the default 800x600 mode added to their mode list, which in some cases could cause problems later down the line. In my case, the LVDS was perfectly available, but the initial config code added 800x600 modes to both of the detected but unavailable HDMI connectors (which are on my non-existent docking station). This ended up preventing later code from setting a mode on my LVDS, which is bad. This patch fixes that behavior by making the initial config code walk through the connectors first, counting the available modes, before it decides to add any default modes to a possibly connected output. It also fixes the logic in drm_target_preferred() that was causing zeroed out modes to be set as the preferred mode for a given connector, even if no modes were available. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Dave Airlie <airlied@linux.ie>
2009-01-16serial: Add 16850 uart type support to OF uart driverMatthias Fuchs1-0/+1
This patch adds support for "ns16850" as supported value of the compatible node in flat device tree uart descriptions. This is needed for example when you have a XR16C2850 uart connected to a PPC405's external bus controller. Signed-off-by: Matthias Fuchs <mfuchs@ma-fu.de> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-01-16hvc_console: Remove tty->low_latencyHendrik Brueckner1-2/+0
This patch removes the tty->low_latency setting. For irq based hvc_console backends the tty->low_latency must be set to 0, because the tty_flip_buffer_push() function must not be called from IRQ context (see drivers/char/tty_buffer.c). For polled backends, the low_latency setting causes the bug trace below, because tty_flip_buffer_push() is called within an atomic context and subsequent calls might sleep due to mutex_lock. BUG: sleeping function called from invalid context at /root/cvs/linux-2.6.git/kernel/mutex.c:207 in_atomic(): 1, irqs_disabled(): 0, pid: 748, name: khvcd 1 lock held by khvcd/748: #0: (hvc_structs_lock){--..}, at: [<00000000002ceb50>] khvcd+0x58/0x12c CPU: 0 Not tainted 2.6.29-rc1git #29 Process khvcd (pid: 748, task: 000000002fb9a480, ksp: 000000002f66bd78) 070000000000000a 000000002f66ba00 0000000000000002 (null) 000000002f66baa0 000000002f66ba18 000000002f66ba18 0000000000104f08 ffffffffffffc000 000000002f66bd78 (null) (null) 000000002f66ba00 000000000000000c 000000002f66ba00 000000002f66ba70 0000000000466af8 0000000000104f08 000000002f66ba00 000000002f66ba50 Call Trace: ([<0000000000104e7c>] show_trace+0x138/0x158) [<0000000000104f62>] show_stack+0xc6/0xf8 [<0000000000105740>] dump_stack+0xb0/0xc0 [<000000000013144a>] __might_sleep+0x14e/0x17c [<000000000045e226>] mutex_lock_nested+0x42/0x3b4 [<00000000002c443e>] echo_char_raw+0x3a/0x9c [<00000000002c688c>] n_tty_receive_buf+0x1154/0x1208 [<00000000002ca0a2>] flush_to_ldisc+0x152/0x220 [<00000000002ca1da>] tty_flip_buffer_push+0x6a/0x90 [<00000000002cea74>] hvc_poll+0x244/0x2c8 [<00000000002ceb68>] khvcd+0x70/0x12c [<000000000015bbd0>] kthread+0x68/0xa0 [<0000000000109d5a>] kernel_thread_starter+0x6/0xc [<0000000000109d54>] kernel_thread_starter+0x0/0xc 1 lock held by khvcd/748: #0: (hvc_structs_lock){--..}, at: [<00000000002ceb50>] khvcd+0x58/0x12c Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-01-16powerpc: Get the number of SLBs from "slb-size" propertyMichael Neuling1-0/+5
The PAPR says that the property for specifying the number of SLBs should be called "slb-size". We currently only look for "ibm,slb-size" because this is what firmware actually presents. This patch makes us look for the "slb-size" property as well and in preference to the "ibm,slb-size". This should future proof us if firmware changes to match PAPR. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-01-16powerpc: is_hugepage_only_range() must account for both 4kB and 64kB slicesDave Kleikamp1-1/+10
powerpc: is_hugepage_only_range() must account for both 4kB and 64kB slices The subpage_prot syscall fails on second and subsequent calls for a given region, because is_hugepage_only_range() is mis-identifying the 4 kB slices when the process has a 64 kB page size. Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-01-16powerpc/ps3: printing fixups for l64 to ll64 conversion drivers/videoStephen Rothwell1-2/+2
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-01-16powerpc/ps3: Printing fixups for l64 to ll64 conversion drivers/scsiStephen Rothwell1-3/+3
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-01-16powerpc/ps3: Printing fixups for l64 to ll64 conversion drivers/ps3Stephen Rothwell3-19/+19
Also some min -> mint_t conversion. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-01-16powerpc/ps3: Printing fixups for l64 to ll64 conversion sound/ppcStephen Rothwell1-2/+2
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-01-16powerpc/ps3: Printing fixups for l64 to ll64 conversion drivers/charStephen Rothwell1-9/+9
Also a couple of min -> min_t changes. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-01-16powerpc/ps3: Printing fixups for l64 to ll64 conversion drivers/blockStephen Rothwell1-9/+9
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-01-16powerpc/ps3: Printing fixups for l64 to ll64 conversion arch/powerpcStephen Rothwell7-42/+42
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-01-16powerpc/ps3: ps3_repository_read_mm_info() takes u64 * argumentsStephen Rothwell1-9/+8
Fixes compiler warnings: arch/powerpc/platforms/ps3/mm.c:1205: warning: passing argument 2 of 'ps3_repository_read_mm_info' from incompatible pointer type arch/powerpc/platforms/ps3/mm.c:1205: warning: passing argument 3 of 'ps3_repository_read_mm_info' from incompatible pointer type Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-01-16powerpc/ps3: clear_bit()/set_bit() operate on unsigned longsStephen Rothwell1-1/+3
This fixes these compiler warning: arch/powerpc/platforms/ps3/interrupt.c:109: warning: passing argument 2 of 'clear_bit' from incompatible pointer type arch/powerpc/platforms/ps3/interrupt.c:130: warning: passing argument 2 of 'set_bit' from incompatible pointer type Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-01-16powerpc/ps3: The lv1_ routines have u64 parametersStephen Rothwell5-37/+49
We just fix up the reference parameters as the others are dealt with by arithmetic promotion rules and don't cause warnings. This removes warnings like this: arch/powerpc/platforms/ps3/interrupt.c:327: warning: passing argument 1 of 'lv1_construct_event_receive_port' from incompatible pointer type Also, these: drivers/ps3/ps3-vuart.c:462: warning: passing argument 4 of 'ps3_vuart_raw_read' from incompatible pointer type drivers/ps3/ps3-vuart.c:592: warning: passing argument 4 of 'ps3_vuart_raw_read' from incompatible pointer type Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-01-16powerpc/ps3: Use dma_addr_t down through the stackStephen Rothwell3-21/+23
Push the dma_addr_t type usage all the way down to where the actual values are manipulated. Now that u64 is "unsigned long long", this removes warnings like: arch/powerpc/platforms/ps3/system-bus.c:532: warning: passing argument 4 of 'ps3_dma_map' from incompatible pointer type arch/powerpc/platforms/ps3/system-bus.c:649: warning: passing argument 4 of 'ps3_dma_map' from incompatible pointer type Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-01-16powerpc/ps3: set_dabr() takes an unsigned longStephen Rothwell1-1/+1
Also silences this warning: arch/powerpc/platforms/ps3/setup.c:275: warning: initialization from incompatible pointer type Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Geoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-01-16powerpc: Cleanup from l64 to ll64 change drivers/scsiStephen Rothwell2-10/+10
This is a powerpc specific driver. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-01-15Merge branch 'sched-fixes-for-linus' of ↵Linus Torvalds2-13/+37
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: sched_slice() fixlet sched: fix update_min_vruntime sched: SCHED_OTHER vs SCHED_IDLE isolation sched: SCHED_IDLE weight change sched: fix bandwidth validation for UID grouping Revert "sched: improve preempt debugging"
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-26 15:34:21 +0000