summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2019-04-06Revert: parisc: Use F_EXTEND() macro in iosapic codeHelge Deller1-1/+5
Revert parts of commit 97d7e2e3fd8a ("parisc: Use F_EXTEND() macro in iosapic code"). It breaks booting the 32-bit kernel on some machines. Reported-by: Sven Schnelle <svens@stackframe.org> Tested-by: Sven Schnelle <svens@stackframe.org> Fixes: 97d7e2e3fd8a ("parisc: Use F_EXTEND() macro in iosapic code") Signed-off-by: Helge Deller <deller@gmx.de>
2019-04-06fs: stream_open - opener for stream-like files so that read and write can ↵Kirill Smelkov5-5/+389
run simultaneously without deadlock Commit 9c225f2655e3 ("vfs: atomic f_pos accesses as per POSIX") added locking for file.f_pos access and in particular made concurrent read and write not possible - now both those functions take f_pos lock for the whole run, and so if e.g. a read is blocked waiting for data, write will deadlock waiting for that read to complete. This caused regression for stream-like files where previously read and write could run simultaneously, but after that patch could not do so anymore. See e.g. commit 581d21a2d02a ("xenbus: fix deadlock on writes to /proc/xen/xenbus") which fixes such regression for particular case of /proc/xen/xenbus. The patch that added f_pos lock in 2014 did so to guarantee POSIX thread safety for read/write/lseek and added the locking to file descriptors of all regular files. In 2014 that thread-safety problem was not new as it was already discussed earlier in 2006. However even though 2006'th version of Linus's patch was adding f_pos locking "only for files that are marked seekable with FMODE_LSEEK (thus avoiding the stream-like objects like pipes and sockets)", the 2014 version - the one that actually made it into the tree as 9c225f2655e3 - is doing so irregardless of whether a file is seekable or not. See https://lore.kernel.org/lkml/53022DB1.4070805@gmail.com/ https://lwn.net/Articles/180387 https://lwn.net/Articles/180396 for historic context. The reason that it did so is, probably, that there are many files that are marked non-seekable, but e.g. their read implementation actually depends on knowing current position to correctly handle the read. Some examples: kernel/power/user.c snapshot_read fs/debugfs/file.c u32_array_read fs/fuse/control.c fuse_conn_waiting_read + ... drivers/hwmon/asus_atk0110.c atk_debugfs_ggrp_read arch/s390/hypfs/inode.c hypfs_read_iter ... Despite that, many nonseekable_open users implement read and write with pure stream semantics - they don't depend on passed ppos at all. And for those cases where read could wait for something inside, it creates a situation similar to xenbus - the write could be never made to go until read is done, and read is waiting for some, potentially external, event, for potentially unbounded time -> deadlock. Besides xenbus, there are 14 such places in the kernel that I've found with semantic patch (see below): drivers/xen/evtchn.c:667:8-24: ERROR: evtchn_fops: .read() can deadlock .write() drivers/isdn/capi/capi.c:963:8-24: ERROR: capi_fops: .read() can deadlock .write() drivers/input/evdev.c:527:1-17: ERROR: evdev_fops: .read() can deadlock .write() drivers/char/pcmcia/cm4000_cs.c:1685:7-23: ERROR: cm4000_fops: .read() can deadlock .write() net/rfkill/core.c:1146:8-24: ERROR: rfkill_fops: .read() can deadlock .write() drivers/s390/char/fs3270.c:488:1-17: ERROR: fs3270_fops: .read() can deadlock .write() drivers/usb/misc/ldusb.c:310:1-17: ERROR: ld_usb_fops: .read() can deadlock .write() drivers/hid/uhid.c:635:1-17: ERROR: uhid_fops: .read() can deadlock .write() net/batman-adv/icmp_socket.c:80:1-17: ERROR: batadv_fops: .read() can deadlock .write() drivers/media/rc/lirc_dev.c:198:1-17: ERROR: lirc_fops: .read() can deadlock .write() drivers/leds/uleds.c:77:1-17: ERROR: uleds_fops: .read() can deadlock .write() drivers/input/misc/uinput.c:400:1-17: ERROR: uinput_fops: .read() can deadlock .write() drivers/infiniband/core/user_mad.c:985:7-23: ERROR: umad_fops: .read() can deadlock .write() drivers/gnss/core.c:45:1-17: ERROR: gnss_fops: .read() can deadlock .write() In addition to the cases above another regression caused by f_pos locking is that now FUSE filesystems that implement open with FOPEN_NONSEEKABLE flag, can no longer implement bidirectional stream-like files - for the same reason as above e.g. read can deadlock write locking on file.f_pos in the kernel. FUSE's FOPEN_NONSEEKABLE was added in 2008 in a7c1b990f715 ("fuse: implement nonseekable open") to support OSSPD. OSSPD implements /dev/dsp in userspace with FOPEN_NONSEEKABLE flag, with corresponding read and write routines not depending on current position at all, and with both read and write being potentially blocking operations: See https://github.com/libfuse/osspd https://lwn.net/Articles/308445 https://github.com/libfuse/osspd/blob/14a9cff0/osspd.c#L1406 https://github.com/libfuse/osspd/blob/14a9cff0/osspd.c#L1438-L1477 https://github.com/libfuse/osspd/blob/14a9cff0/osspd.c#L1479-L1510 Corresponding libfuse example/test also describes FOPEN_NONSEEKABLE as "somewhat pipe-like files ..." with read handler not using offset. However that test implements only read without write and cannot exercise the deadlock scenario: https://github.com/libfuse/libfuse/blob/fuse-3.4.2-3-ga1bff7d/example/poll.c#L124-L131 https://github.com/libfuse/libfuse/blob/fuse-3.4.2-3-ga1bff7d/example/poll.c#L146-L163 https://github.com/libfuse/libfuse/blob/fuse-3.4.2-3-ga1bff7d/example/poll.c#L209-L216 I've actually hit the read vs write deadlock for real while implementing my FUSE filesystem where there is /head/watch file, for which open creates separate bidirectional socket-like stream in between filesystem and its user with both read and write being later performed simultaneously. And there it is semantically not easy to split the stream into two separate read-only and write-only channels: https://lab.nexedi.com/kirr/wendelin.core/blob/f13aa600/wcfs/wcfs.go#L88-169 Let's fix this regression. The plan is: 1. We can't change nonseekable_open to include &~FMODE_ATOMIC_POS - doing so would break many in-kernel nonseekable_open users which actually use ppos in read/write handlers. 2. Add stream_open() to kernel to open stream-like non-seekable file descriptors. Read and write on such file descriptors would never use nor change ppos. And with that property on stream-like files read and write will be running without taking f_pos lock - i.e. read and write could be running simultaneously. 3. With semantic patch search and convert to stream_open all in-kernel nonseekable_open users for which read and write actually do not depend on ppos and where there is no other methods in file_operations which assume @offset access. 4. Add FOPEN_STREAM to fs/fuse/ and open in-kernel file-descriptors via steam_open if that bit is present in filesystem open reply. It was tempting to change fs/fuse/ open handler to use stream_open instead of nonseekable_open on just FOPEN_NONSEEKABLE flags, but grepping through Debian codesearch shows users of FOPEN_NONSEEKABLE, and in particular GVFS which actually uses offset in its read and write handlers https://codesearch.debian.net/search?q=-%3Enonseekable+%3D https://gitlab.gnome.org/GNOME/gvfs/blob/1.40.0-6-gcbc54396/client/gvfsfusedaemon.c#L1080 https://gitlab.gnome.org/GNOME/gvfs/blob/1.40.0-6-gcbc54396/client/gvfsfusedaemon.c#L1247-1346 https://gitlab.gnome.org/GNOME/gvfs/blob/1.40.0-6-gcbc54396/client/gvfsfusedaemon.c#L1399-1481 so if we would do such a change it will break a real user. 5. Add stream_open and FOPEN_STREAM handling to stable kernels starting from v3.14+ (the kernel where 9c225f2655 first appeared). This will allow to patch OSSPD and other FUSE filesystems that provide stream-like files to return FOPEN_STREAM | FOPEN_NONSEEKABLE in their open handler and this way avoid the deadlock on all kernel versions. This should work because fs/fuse/ ignores unknown open flags returned from a filesystem and so passing FOPEN_STREAM to a kernel that is not aware of this flag cannot hurt. In turn the kernel that is not aware of FOPEN_STREAM will be < v3.14 where just FOPEN_NONSEEKABLE is sufficient to implement streams without read vs write deadlock. This patch adds stream_open, converts /proc/xen/xenbus to it and adds semantic patch to automatically locate in-kernel places that are either required to be converted due to read vs write deadlock, or that are just safe to be converted because read and write do not use ppos and there are no other funky methods in file_operations. Regarding semantic patch I've verified each generated change manually - that it is correct to convert - and each other nonseekable_open instance left - that it is either not correct to convert there, or that it is not converted due to current stream_open.cocci limitations. The script also does not convert files that should be valid to convert, but that currently have .llseek = noop_llseek or generic_file_llseek for unknown reason despite file being opened with nonseekable_open (e.g. drivers/input/mousedev.c) Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Yongzhi Pan <panyongzhi@gmail.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Juergen Gross <jgross@suse.com> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Tejun Heo <tj@kernel.org> Cc: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Nikolaus Rath <Nikolaus@rath.org> Cc: Han-Wen Nienhuys <hanwen@google.com> Signed-off-by: Kirill Smelkov <kirr@nexedi.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-04-06xsysace: Fix error handling in ace_setupGuenter Roeck1-0/+2
If xace hardware reports a bad version number, the error handling code in ace_setup() calls put_disk(), followed by queue cleanup. However, since the disk data structure has the queue pointer set, put_disk() also cleans and releases the queue. This results in blk_cleanup_queue() accessing an already released data structure, which in turn may result in a crash such as the following. [ 10.681671] BUG: Kernel NULL pointer dereference at 0x00000040 [ 10.681826] Faulting instruction address: 0xc0431480 [ 10.682072] Oops: Kernel access of bad area, sig: 11 [#1] [ 10.682251] BE PAGE_SIZE=4K PREEMPT Xilinx Virtex440 [ 10.682387] Modules linked in: [ 10.682528] CPU: 0 PID: 1 Comm: swapper Tainted: G W 5.0.0-rc6-next-20190218+ #2 [ 10.682733] NIP: c0431480 LR: c043147c CTR: c0422ad8 [ 10.682863] REGS: cf82fbe0 TRAP: 0300 Tainted: G W (5.0.0-rc6-next-20190218+) [ 10.683065] MSR: 00029000 <CE,EE,ME> CR: 22000222 XER: 00000000 [ 10.683236] DEAR: 00000040 ESR: 00000000 [ 10.683236] GPR00: c043147c cf82fc90 cf82ccc0 00000000 00000000 00000000 00000002 00000000 [ 10.683236] GPR08: 00000000 00000000 c04310bc 00000000 22000222 00000000 c0002c54 00000000 [ 10.683236] GPR16: 00000000 00000001 c09aa39c c09021b0 c09021dc 00000007 c0a68c08 00000000 [ 10.683236] GPR24: 00000001 ced6d400 ced6dcf0 c0815d9c 00000000 00000000 00000000 cedf0800 [ 10.684331] NIP [c0431480] blk_mq_run_hw_queue+0x28/0x114 [ 10.684473] LR [c043147c] blk_mq_run_hw_queue+0x24/0x114 [ 10.684602] Call Trace: [ 10.684671] [cf82fc90] [c043147c] blk_mq_run_hw_queue+0x24/0x114 (unreliable) [ 10.684854] [cf82fcc0] [c04315bc] blk_mq_run_hw_queues+0x50/0x7c [ 10.685002] [cf82fce0] [c0422b24] blk_set_queue_dying+0x30/0x68 [ 10.685154] [cf82fcf0] [c0423ec0] blk_cleanup_queue+0x34/0x14c [ 10.685306] [cf82fd10] [c054d73c] ace_probe+0x3dc/0x508 [ 10.685445] [cf82fd50] [c052d740] platform_drv_probe+0x4c/0xb8 [ 10.685592] [cf82fd70] [c052abb0] really_probe+0x20c/0x32c [ 10.685728] [cf82fda0] [c052ae58] driver_probe_device+0x68/0x464 [ 10.685877] [cf82fdc0] [c052b500] device_driver_attach+0xb4/0xe4 [ 10.686024] [cf82fde0] [c052b5dc] __driver_attach+0xac/0xfc [ 10.686161] [cf82fe00] [c0528428] bus_for_each_dev+0x80/0xc0 [ 10.686314] [cf82fe30] [c0529b3c] bus_add_driver+0x144/0x234 [ 10.686457] [cf82fe50] [c052c46c] driver_register+0x88/0x15c [ 10.686610] [cf82fe60] [c09de288] ace_init+0x4c/0xac [ 10.686742] [cf82fe80] [c0002730] do_one_initcall+0xac/0x330 [ 10.686888] [cf82fee0] [c09aafd0] kernel_init_freeable+0x34c/0x478 [ 10.687043] [cf82ff30] [c0002c6c] kernel_init+0x18/0x114 [ 10.687188] [cf82ff40] [c000f2f0] ret_from_kernel_thread+0x14/0x1c [ 10.687349] Instruction dump: [ 10.687435] 3863ffd4 4bfffd70 9421ffd0 7c0802a6 93c10028 7c9e2378 93e1002c 38810008 [ 10.687637] 7c7f1b78 90010034 4bfffc25 813f008c <81290040> 75290100 4182002c 80810008 [ 10.688056] ---[ end trace 13c9ff51d41b9d40 ]--- Fix the problem by setting the disk queue pointer to NULL before calling put_disk(). A more comprehensive fix might be to rearrange the code to check the hardware version before initializing data structures, but I don't know if this would have undesirable side effects, and it would increase the complexity of backporting the fix to older kernels. Fixes: 74489a91dd43a ("Add support for Xilinx SystemACE CompactFlash interface") Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-06null_blk: prevent crash from bad home_node valueJohn Pittman1-0/+5
At module load, if the selected home_node value is greater than the available numa nodes, the system will crash in __alloc_pages_nodemask() due to a bad paging request. Prevent this user error crash by detecting the bad value, logging an error, and setting g_home_node back to the default of NUMA_NO_NODE. Signed-off-by: John Pittman <jpittman@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-06Merge tag 'rtc-5.1-2' of ↵Linus Torvalds4-5/+12
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC fixes from Alexandre Belloni: - Various alarm fixes for da9063, cros-ec and sh - sd3078 manufacturer name fix as this was introduced this cycle * tag 'rtc-5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: rtc: da9063: set uie_unsupported when relevant rtc: sd3078: fix manufacturer name rtc: sh: Fix invalid alarm warning for non-enabled alarm rtc: cros-ec: Fail suspend/resume if wake IRQ can't be configured
2019-04-06i2c: imx: don't leak the i2c adapter on errorLaurentiu Tudor1-1/+3
Make sure to free the i2c adapter on the error exit path. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Fixes: e1ab9a468e3b ("i2c: imx: improve the error handling in i2c_imx_dma_request()") Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-04-05Merge branch 'akpm' (patches from Andrew)Linus Torvalds18-59/+163
Merge misc fixes from Andrew Morton: "14 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: kernel/sysctl.c: fix out-of-bounds access when setting file-max mm/util.c: fix strndup_user() comment sh: fix multiple function definition build errors MAINTAINERS: add maintainer and replacing reviewer ARM/NUVOTON NPCM MAINTAINERS: fix bad pattern in ARM/NUVOTON NPCM mm: writeback: use exact memcg dirty counts psi: clarify the units used in pressure files mm/huge_memory.c: fix modifying of page protection by insert_pfn_pmd() hugetlbfs: fix memory leak for resv_map mm: fix vm_fault_t cast in VM_FAULT_GET_HINDEX() lib/lzo: fix bugs for very short or empty input include/linux/bitrev.h: fix constant bitrev kmemleak: powerpc: skip scanning holes in the .bss section lib/string.c: implement a basic bcmp
2019-04-05kernel/sysctl.c: fix out-of-bounds access when setting file-maxWill Deacon1-1/+2
Commit 32a5ad9c2285 ("sysctl: handle overflow for file-max") hooked up min/max values for the file-max sysctl parameter via the .extra1 and .extra2 fields in the corresponding struct ctl_table entry. Unfortunately, the minimum value points at the global 'zero' variable, which is an int. This results in a KASAN splat when accessed as a long by proc_doulongvec_minmax on 64-bit architectures: | BUG: KASAN: global-out-of-bounds in __do_proc_doulongvec_minmax+0x5d8/0x6a0 | Read of size 8 at addr ffff2000133d1c20 by task systemd/1 | | CPU: 0 PID: 1 Comm: systemd Not tainted 5.1.0-rc3-00012-g40b114779944 #2 | Hardware name: linux,dummy-virt (DT) | Call trace: | dump_backtrace+0x0/0x228 | show_stack+0x14/0x20 | dump_stack+0xe8/0x124 | print_address_description+0x60/0x258 | kasan_report+0x140/0x1a0 | __asan_report_load8_noabort+0x18/0x20 | __do_proc_doulongvec_minmax+0x5d8/0x6a0 | proc_doulongvec_minmax+0x4c/0x78 | proc_sys_call_handler.isra.19+0x144/0x1d8 | proc_sys_write+0x34/0x58 | __vfs_write+0x54/0xe8 | vfs_write+0x124/0x3c0 | ksys_write+0xbc/0x168 | __arm64_sys_write+0x68/0x98 | el0_svc_common+0x100/0x258 | el0_svc_handler+0x48/0xc0 | el0_svc+0x8/0xc | | The buggy address belongs to the variable: | zero+0x0/0x40 | | Memory state around the buggy address: | ffff2000133d1b00: 00 00 00 00 00 00 00 00 fa fa fa fa 04 fa fa fa | ffff2000133d1b80: fa fa fa fa 04 fa fa fa fa fa fa fa 04 fa fa fa | >ffff2000133d1c00: fa fa fa fa 04 fa fa fa fa fa fa fa 00 00 00 00 | ^ | ffff2000133d1c80: fa fa fa fa 00 fa fa fa fa fa fa fa 00 00 00 00 | ffff2000133d1d00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Fix the splat by introducing a unsigned long 'zero_ul' and using that instead. Link: http://lkml.kernel.org/r/20190403153409.17307-1-will.deacon@arm.com Fixes: 32a5ad9c2285 ("sysctl: handle overflow for file-max") Signed-off-by: Will Deacon <will.deacon@arm.com> Acked-by: Christian Brauner <christian@brauner.io> Cc: Kees Cook <keescook@chromium.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Matteo Croce <mcroce@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-04-05mm/util.c: fix strndup_user() commentAndrew Morton1-1/+1
The kerneldoc misdescribes strndup_user()'s return value. Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Timur Tabi <timur@freescale.com> Cc: Mihai Caraman <mihai.caraman@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-04-05sh: fix multiple function definition build errorsRandy Dunlap1-2/+2
Many of the sh CPU-types have their own plat_irq_setup() and arch_init_clk_ops() functions, so these same (empty) functions in arch/sh/boards/of-generic.c are not needed and cause build errors. If there is some case where these empty functions are needed, they can be retained by marking them as "__weak" while at the same time making builds that do not need them succeed. Fixes these build errors: arch/sh/boards/of-generic.o: In function `plat_irq_setup': (.init.text+0x134): multiple definition of `plat_irq_setup' arch/sh/kernel/cpu/sh2/setup-sh7619.o:(.init.text+0x30): first defined here arch/sh/boards/of-generic.o: In function `arch_init_clk_ops': (.init.text+0x118): multiple definition of `arch_init_clk_ops' arch/sh/kernel/cpu/sh2/clock-sh7619.o:(.init.text+0x0): first defined here Link: http://lkml.kernel.org/r/9ee4e0c5-f100-86a2-bd4d-1d3287ceab31@infradead.org Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kbuild test robot <lkp@intel.com> Cc: Takashi Iwai <tiwai@suse.de> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-04-05MAINTAINERS: add maintainer and replacing reviewer ARM/NUVOTON NPCMTomer Maimon1-1/+2
Add Tali Perry as Nuvoton NPCM maintainer, replace Brendan Higgins Nuvoton NPCM reviewer with Benjamin Fair. Link: http://lkml.kernel.org/r/20190328235752.334462-2-tmaimon77@gmail.com Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> Reviewed-by: Brendan Higgins <brendanhiggins@google.com> Reviewed-by: Benjamin Fair <benjaminfair@google.com> Reviewed-by: Mukesh Ojha <mojha@codeaurora.org> Cc: Joe Perches <joe@perches.com> Cc: Avi Fishman <avifishman70@gmail.com> Cc: Patrick Venture <venture@google.com> Cc: Nancy Yuen <yuenn@google.com> Cc: Tali Perry <tali.perry1@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-04-05MAINTAINERS: fix bad pattern in ARM/NUVOTON NPCMTomer Maimon1-1/+1
In the process of upstreaming architecture support for ARM/NUVOTON NPCM include/dt-bindings/clock/nuvoton,npcm7xx-clks.h was renamed include/dt-bindings/clock/nuvoton,npcm7xx-clock.h without updating MAINTAINERS. This updates the MAINTAINERS pattern to match the new name of this file. Link: http://lkml.kernel.org/r/20190328235752.334462-1-tmaimon77@gmail.com Fixes: 6a498e06ba22 ("MAINTAINERS: Add entry for the Nuvoton NPCM architecture") Signed-off-by: Brendan Higgins <brendanhiggins@google.com> Signed-off-by: Tomer Maimon <tmaimon77@gmail.com> Reported-by: Joe Perches <joe@perches.com> Reviewed-by: Benjamin Fair <benjaminfair@google.com> Cc: Avi Fishman <avifishman70@gmail.com> Cc: Mukesh Ojha <mojha@codeaurora.org> Cc: Nancy Yuen <yuenn@google.com> Cc: Patrick Venture <venture@google.com> Cc: Tali Perry <tali.perry1@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-04-05mm: writeback: use exact memcg dirty countsGreg Thelen2-3/+22
Since commit a983b5ebee57 ("mm: memcontrol: fix excessive complexity in memory.stat reporting") memcg dirty and writeback counters are managed as: 1) per-memcg per-cpu values in range of [-32..32] 2) per-memcg atomic counter When a per-cpu counter cannot fit in [-32..32] it's flushed to the atomic. Stat readers only check the atomic. Thus readers such as balance_dirty_pages() may see a nontrivial error margin: 32 pages per cpu. Assuming 100 cpus: 4k x86 page_size: 13 MiB error per memcg 64k ppc page_size: 200 MiB error per memcg Considering that dirty+writeback are used together for some decisions the errors double. This inaccuracy can lead to undeserved oom kills. One nasty case is when all per-cpu counters hold positive values offsetting an atomic negative value (i.e. per_cpu[*]=32, atomic=n_cpu*-32). balance_dirty_pages() only consults the atomic and does not consider throttling the next n_cpu*32 dirty pages. If the file_lru is in the 13..200 MiB range then there's absolutely no dirty throttling, which burdens vmscan with only dirty+writeback pages thus resorting to oom kill. It could be argued that tiny containers are not supported, but it's more subtle. It's the amount the space available for file lru that matters. If a container has memory.max-200MiB of non reclaimable memory, then it will also suffer such oom kills on a 100 cpu machine. The following test reliably ooms without this patch. This patch avoids oom kills. $ cat test mount -t cgroup2 none /dev/cgroup cd /dev/cgroup echo +io +memory > cgroup.subtree_control mkdir test cd test echo 10M > memory.max (echo $BASHPID > cgroup.procs && exec /memcg-writeback-stress /foo) (echo $BASHPID > cgroup.procs && exec dd if=/dev/zero of=/foo bs=2M count=100) $ cat memcg-writeback-stress.c /* * Dirty pages from all but one cpu. * Clean pages from the non dirtying cpu. * This is to stress per cpu counter imbalance. * On a 100 cpu machine: * - per memcg per cpu dirty count is 32 pages for each of 99 cpus * - per memcg atomic is -99*32 pages * - thus the complete dirty limit: sum of all counters 0 * - balance_dirty_pages() only sees atomic count -99*32 pages, which * it max()s to 0. * - So a workload can dirty -99*32 pages before balance_dirty_pages() * cares. */ #define _GNU_SOURCE #include <err.h> #include <fcntl.h> #include <sched.h> #include <stdlib.h> #include <stdio.h> #include <sys/stat.h> #include <sys/sysinfo.h> #include <sys/types.h> #include <unistd.h> static char *buf; static int bufSize; static void set_affinity(int cpu) { cpu_set_t affinity; CPU_ZERO(&affinity); CPU_SET(cpu, &affinity); if (sched_setaffinity(0, sizeof(affinity), &affinity)) err(1, "sched_setaffinity"); } static void dirty_on(int output_fd, int cpu) { int i, wrote; set_affinity(cpu); for (i = 0; i < 32; i++) { for (wrote = 0; wrote < bufSize; ) { int ret = write(output_fd, buf+wrote, bufSize-wrote); if (ret == -1) err(1, "write"); wrote += ret; } } } int main(int argc, char **argv) { int cpu, flush_cpu = 1, output_fd; const char *output; if (argc != 2) errx(1, "usage: output_file"); output = argv[1]; bufSize = getpagesize(); buf = malloc(getpagesize()); if (buf == NULL) errx(1, "malloc failed"); output_fd = open(output, O_CREAT|O_RDWR); if (output_fd == -1) err(1, "open(%s)", output); for (cpu = 0; cpu < get_nprocs(); cpu++) { if (cpu != flush_cpu) dirty_on(output_fd, cpu); } set_affinity(flush_cpu); if (fsync(output_fd)) err(1, "fsync(%s)", output); if (close(output_fd)) err(1, "close(%s)", output); free(buf); } Make balance_dirty_pages() and wb_over_bg_thresh() work harder to collect exact per memcg counters. This avoids the aforementioned oom kills. This does not affect the overhead of memory.stat, which still reads the single atomic counter. Why not use percpu_counter? memcg already handles cpus going offline, so no need for that overhead from percpu_counter. And the percpu_counter spinlocks are more heavyweight than is required. It probably also makes sense to use exact dirty and writeback counters in memcg oom reports. But that is saved for later. Link: http://lkml.kernel.org/r/20190329174609.164344-1-gthelen@google.com Signed-off-by: Greg Thelen <gthelen@google.com> Reviewed-by: Roman Gushchin <guro@fb.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: <stable@vger.kernel.org> [4.16+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-04-05psi: clarify the units used in pressure filesWaiman Long1-6/+6
The output of the PSI files show a bunch of numbers with no unit. The psi.txt documentation file also does not indicate what units are used. One can only find out by looking at the source code. The units are percentage for the averages and useconds for the total. Make the information easier to find by documenting the units in psi.txt. Link: http://lkml.kernel.org/r/20190402193810.3450-1-longman@redhat.com Signed-off-by: Waiman Long <longman@redhat.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org> Cc: Tejun Heo <tj@kernel.org> Cc: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-04-05mm/huge_memory.c: fix modifying of page protection by insert_pfn_pmd()Aneesh Kumar K.V1-0/+36
With some architectures like ppc64, set_pmd_at() cannot cope with a situation where there is already some (different) valid entry present. Use pmdp_set_access_flags() instead to modify the pfn which is built to deal with modifying existing PMD entries. This is similar to commit cae85cb8add3 ("mm/memory.c: fix modifying of page protection by insert_pfn()") We also do similar update w.r.t insert_pfn_pud eventhough ppc64 don't support pud pfn entries now. Without this patch we also see the below message in kernel log "BUG: non-zero pgtables_bytes on freeing mm:" Link: http://lkml.kernel.org/r/20190402115125.18803-1-aneesh.kumar@linux.ibm.com Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Reported-by: Chandan Rajendra <chandan@linux.ibm.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Dan Williams <dan.j.williams@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-04-05hugetlbfs: fix memory leak for resv_mapMike Kravetz1-6/+14
When mknod is used to create a block special file in hugetlbfs, it will allocate an inode and kmalloc a 'struct resv_map' via resv_map_alloc(). inode->i_mapping->private_data will point the newly allocated resv_map. However, when the device special file is opened bd_acquire() will set inode->i_mapping to bd_inode->i_mapping. Thus the pointer to the allocated resv_map is lost and the structure is leaked. Programs to reproduce: mount -t hugetlbfs nodev hugetlbfs mknod hugetlbfs/dev b 0 0 exec 30<> hugetlbfs/dev umount hugetlbfs/ resv_map structures are only needed for inodes which can have associated page allocations. To fix the leak, only allocate resv_map for those inodes which could possibly be associated with page allocations. Link: http://lkml.kernel.org/r/20190401213101.16476-1-mike.kravetz@oracle.com Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reported-by: Yufen Yu <yuyufen@huawei.com> Suggested-by: Yufen Yu <yuyufen@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-04-05mm: fix vm_fault_t cast in VM_FAULT_GET_HINDEX()Jann Horn1-1/+1
Symmetrically to VM_FAULT_SET_HINDEX(), we need a force-cast in VM_FAULT_GET_HINDEX() to tell sparse that this is intentional. Sparse complains about the current code when building a kernel with CONFIG_MEMORY_FAILURE: arch/x86/mm/fault.c:1058:53: warning: restricted vm_fault_t degrades to integer Link: http://lkml.kernel.org/r/20190327204117.35215-1-jannh@google.com Fixes: 3d3539018d2c ("mm: create the new vm_fault_t type") Signed-off-by: Jann Horn <jannh@google.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Souptick Joarder <jrdr.linux@gmail.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Rik van Riel <riel@surriel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-04-05lib/lzo: fix bugs for very short or empty inputDave Rodgman3-9/+12
For very short input data (0 - 1 bytes), lzo-rle was not behaving correctly. Fix this behaviour and update documentation accordingly. For zero-length input, lzo v0 outputs an end-of-stream marker only, which was misinterpreted by lzo-rle as a bitstream version number. Ensure bitstream versions > 0 require a minimum stream length of 5. Also fixes a bug in handling the tail for very short inputs when a bitstream version is present. Link: http://lkml.kernel.org/r/20190326165857.34613-1-dave.rodgman@arm.com Signed-off-by: Dave Rodgman <dave.rodgman@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-04-05include/linux/bitrev.h: fix constant bitrevArnd Bergmann1-23/+23
clang points out with hundreds of warnings that the bitrev macros have a problem with constant input: drivers/hwmon/sht15.c:187:11: error: variable '__x' is uninitialized when used within its own initialization [-Werror,-Wuninitialized] u8 crc = bitrev8(data->val_status & 0x0F); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ include/linux/bitrev.h:102:21: note: expanded from macro 'bitrev8' __constant_bitrev8(__x) : \ ~~~~~~~~~~~~~~~~~~~^~~~ include/linux/bitrev.h:67:11: note: expanded from macro '__constant_bitrev8' u8 __x = x; \ ~~~ ^ Both the bitrev and the __constant_bitrev macros use an internal variable named __x, which goes horribly wrong when passing one to the other. The obvious fix is to rename one of the variables, so this adds an extra '_'. It seems we got away with this because - there are only a few drivers using bitrev macros - usually there are no constant arguments to those - when they are constant, they tend to be either 0 or (unsigned)-1 (drivers/isdn/i4l/isdnhdlc.o, drivers/iio/amplifiers/ad8366.c) and give the correct result by pure chance. In fact, the only driver that I could find that gets different results with this is drivers/net/wan/slic_ds26522.c, which in turn is a driver for fairly rare hardware (adding the maintainer to Cc for testing). Link: http://lkml.kernel.org/r/20190322140503.123580-1-arnd@arndb.de Fixes: 556d2f055bf6 ("ARM: 8187/1: add CONFIG_HAVE_ARCH_BITREVERSE to support rbit instruction") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Cc: Zhao Qiang <qiang.zhao@nxp.com> Cc: Yalin Wang <yalin.wang@sonymobile.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-04-05kmemleak: powerpc: skip scanning holes in the .bss sectionCatalin Marinas2-5/+18
Commit 2d4f567103ff ("KVM: PPC: Introduce kvm_tmp framework") adds kvm_tmp[] into the .bss section and then free the rest of unused spaces back to the page allocator. kernel_init kvm_guest_init kvm_free_tmp free_reserved_area free_unref_page free_unref_page_prepare With DEBUG_PAGEALLOC=y, it will unmap those pages from kernel. As the result, kmemleak scan will trigger a panic when it scans the .bss section with unmapped pages. This patch creates dedicated kmemleak objects for the .data, .bss and potentially .data..ro_after_init sections to allow partial freeing via the kmemleak_free_part() in the powerpc kvm_free_tmp() function. Link: http://lkml.kernel.org/r/20190321171917.62049-1-catalin.marinas@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Reported-by: Qian Cai <cai@lca.pw> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Tested-by: Qian Cai <cai@lca.pw> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Avi Kivity <avi@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krcmar <rkrcmar@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-04-05lib/string.c: implement a basic bcmpNick Desaulniers2-0/+23
A recent optimization in Clang (r355672) lowers comparisons of the return value of memcmp against zero to comparisons of the return value of bcmp against zero. This helps some platforms that implement bcmp more efficiently than memcmp. glibc simply aliases bcmp to memcmp, but an optimized implementation is in the works. This results in linkage failures for all targets with Clang due to the undefined symbol. For now, just implement bcmp as a tailcail to memcmp to unbreak the build. This routine can be further optimized in the future. Other ideas discussed: * A weak alias was discussed, but breaks for architectures that define their own implementations of memcmp since aliases to declarations are not permitted (only definitions). Arch-specific memcmp implementations typically declare memcmp in C headers, but implement them in assembly. * -ffreestanding also is used sporadically throughout the kernel. * -fno-builtin-bcmp doesn't work when doing LTO. Link: https://bugs.llvm.org/show_bug.cgi?id=41035 Link: https://code.woboq.org/userspace/glibc/string/memcmp.c.html#bcmp Link: https://github.com/llvm/llvm-project/commit/8e16d73346f8091461319a7dfc4ddd18eedcff13 Link: https://github.com/ClangBuiltLinux/linux/issues/416 Link: http://lkml.kernel.org/r/20190313211335.165605-1-ndesaulniers@google.com Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Reported-by: Nathan Chancellor <natechancellor@gmail.com> Reported-by: Adhemerval Zanella <adhemerval.zanella@linaro.org> Suggested-by: Arnd Bergmann <arnd@arndb.de> Suggested-by: James Y Knight <jyknight@google.com> Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com> Suggested-by: Nathan Chancellor <natechancellor@gmail.com> Suggested-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Tested-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: David Laight <David.Laight@ACULAB.COM> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-04-05Merge tag 'for-5.1/dm-fixes' of ↵Linus Torvalds6-27/+72
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - Two queue_limits stacking fixes: disable discards if underlying driver does. And propagate BDI_CAP_STABLE_WRITES to fix sporadic checksum errors. - Fix that reverts a DM core limit that wasn't needed given that dm-crypt was already updated to impose an equivalent limit. - Fix dm-init to properly establish 'const' for __initconst array. - Fix deadlock in DM integrity target that occurs when overlapping IO is being issued to it. And two smaller fixes to the DM integrity target. * tag 'for-5.1/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm integrity: fix deadlock with overlapping I/O dm: disable DISCARD if the underlying storage no longer supports it dm table: propagate BDI_CAP_STABLE_WRITES to fix sporadic checksum errors dm: revert 8f50e358153d ("dm: limit the max bio size as BIO_MAX_PAGES * PAGE_SIZE") dm init: fix const confusion for dm_allowed_targets array dm integrity: make dm_integrity_init and dm_integrity_exit static dm integrity: change memcmp to strncmp in dm_integrity_ctr
2019-04-05Merge tag 'vfio-v5.1-rc4' of git://github.com/awilliam/linux-vfioLinus Torvalds3-3/+17
Pull VFIO fixes from Alex Williamson: - Fix clang printk format errors (Louis Taylor) - Declare structure static to fix sparse warning (Wang Hai) - Limit user DMA mappings per container (CVE-2019-3882) (Alex Williamson) * tag 'vfio-v5.1-rc4' of git://github.com/awilliam/linux-vfio: vfio/type1: Limit DMA mappings per container vfio/spapr_tce: Make symbol 'tce_iommu_driver_ops' static vfio/pci: use correct format characters
2019-04-05Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds2-37/+59
Pull kvm fixes from Paolo Bonzini: "x86 fixes for overflows and other nastiness" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: nVMX: fix x2APIC VTPR read intercept KVM: x86: nVMX: close leak of L0's x2APIC MSRs (CVE-2019-3887) KVM: SVM: prevent DBG_DECRYPT and DBG_ENCRYPT overflow kvm: svm: fix potential get_num_contig_pages overflow
2019-04-05Merge tag 'arm64-fixes' of ↵Linus Torvalds1-0/+6
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fix from Catalin Marinas: "Fix unwind_frame() in the context of pseudo NMI" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: fix wrong check of on_sdei_stack in nmi context
2019-04-05Merge tag 'trace-5.1-rc3' of ↵Linus Torvalds32-722/+247
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull syscall-get-arguments cleanup and fixes from Steven Rostedt: "Andy Lutomirski approached me to tell me that the syscall_get_arguments() implementation in x86 was horrible and gcc certainly gets it wrong. He said that since the tracepoints only pass in 0 and 6 for i and n repectively, it should be optimized for that case. Inspecting the kernel, I discovered that all users pass in 0 for i and only one file passing in something other than 6 for the number of arguments. That code happens to be my own code used for the special syscall tracing. That can easily be converted to just using 0 and 6 as well, and only copying what is needed. Which is probably the faster path anyway for that case. Along the way, a couple of real fixes came from this as the syscall_get_arguments() function was incorrect for csky and riscv. x86 has been optimized to for the new interface that removes the variable number of arguments, but the other architectures could still use some loving and take more advantage of the simpler interface" * tag 'trace-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: syscalls: Remove start and number from syscall_set_arguments() args syscalls: Remove start and number from syscall_get_arguments() args csky: Fix syscall_get_arguments() and syscall_set_arguments() riscv: Fix syscall_get_arguments() and syscall_set_arguments() tracing/syscalls: Pass in hardcoded 6 into syscall_get_arguments() ptrace: Remove maxargs from task_current_syscall()
2019-04-05dm integrity: fix deadlock with overlapping I/OMikulas Patocka1-3/+1
dm-integrity will deadlock if overlapping I/O is issued to it, the bug was introduced by commit 724376a04d1a ("dm integrity: implement fair range locks"). Users rarely use overlapping I/O so this bug went undetected until now. Fix this bug by correcting, likely cut-n-paste, typos in ranges_overlap() and also remove a flawed ranges_overlap() check in remove_range_unlocked(). This condition could leave unprocessed bios hanging on wait_list forever. Cc: stable@vger.kernel.org # v4.19+ Fixes: 724376a04d1a ("dm integrity: implement fair range locks") Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2019-04-05KVM: x86: nVMX: fix x2APIC VTPR read interceptMarc Orr1-1/+1
Referring to the "VIRTUALIZING MSR-BASED APIC ACCESSES" chapter of the SDM, when "virtualize x2APIC mode" is 1 and "APIC-register virtualization" is 0, a RDMSR of 808H should return the VTPR from the virtual APIC page. However, for nested, KVM currently fails to disable the read intercept for this MSR. This means that a RDMSR exit takes precedence over "virtualize x2APIC mode", and KVM passes through L1's TPR to L2, instead of sourcing the value from L2's virtual APIC page. This patch fixes the issue by disabling the read intercept, in VMCS02, for the VTPR when "APIC-register virtualization" is 0. The issue described above and fix prescribed here, were verified with a related patch in kvm-unit-tests titled "Test VMX's virtualize x2APIC mode w/ nested". Signed-off-by: Marc Orr <marcorr@google.com> Reviewed-by: Jim Mattson <jmattson@google.com> Fixes: c992384bde84f ("KVM: vmx: speed up MSR bitmap merge") Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-04-05KVM: x86: nVMX: close leak of L0's x2APIC MSRs (CVE-2019-3887)Marc Orr1-28/+44
The nested_vmx_prepare_msr_bitmap() function doesn't directly guard the x2APIC MSR intercepts with the "virtualize x2APIC mode" MSR. As a result, we discovered the potential for a buggy or malicious L1 to get access to L0's x2APIC MSRs, via an L2, as follows. 1. L1 executes WRMSR(IA32_SPEC_CTRL, 1). This causes the spec_ctrl variable, in nested_vmx_prepare_msr_bitmap() to become true. 2. L1 disables "virtualize x2APIC mode" in VMCS12. 3. L1 enables "APIC-register virtualization" in VMCS12. Now, KVM will set VMCS02's x2APIC MSR intercepts from VMCS12, and then set "virtualize x2APIC mode" to 0 in VMCS02. Oops. This patch closes the leak by explicitly guarding VMCS02's x2APIC MSR intercepts with VMCS12's "virtualize x2APIC mode" control. The scenario outlined above and fix prescribed here, were verified with a related patch in kvm-unit-tests titled "Add leak scenario to virt_x2apic_mode_test". Note, it looks like this issue may have been introduced inadvertently during a merge---see 15303ba5d1cd. Signed-off-by: Marc Orr <marcorr@google.com> Reviewed-by: Jim Mattson <jmattson@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-04-05KVM: SVM: prevent DBG_DECRYPT and DBG_ENCRYPT overflowDavid Rientjes1-3/+9
This ensures that the address and length provided to DBG_DECRYPT and DBG_ENCRYPT do not cause an overflow. At the same time, pass the actual number of pages pinned in memory to sev_unpin_memory() as a cleanup. Reported-by: Cfir Cohen <cfir@google.com> Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-04-05kvm: svm: fix potential get_num_contig_pages overflowDavid Rientjes1-5/+5
get_num_contig_pages() could potentially overflow int so make its type consistent with its usage. Reported-by: Cfir Cohen <cfir@google.com> Cc: stable@vger.kernel.org Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-04-05Merge tag 'mm-compaction-5.1-rc4' of ↵Linus Torvalds1-11/+18
git://git.kernel.org/pub/scm/linux/kernel/git/mel/linux Pull mm/compaction fixes from Mel Gorman: "The merge window for 5.1 introduced a number of compaction-related patches. with intermittent reports of corruption and functional issues. The bugs are due to sloopy checking of zone boundaries and a corner case where invalid indexes are used to access the free lists. Reports are not common but at least two users and 0-day have tripped over them. There is a chance that one of the syzbot reports are related but it has not been confirmed properly. The normal submission path is with Andrew but there have been some delays and I consider them urgent enough that they should be picked up before RC4 to avoid duplicate reports. All of these have been successfully tested on older RC windows. This will make this branch look like a rebase but in fact, they've simply been lifted again from Andrew's tree and placed on a fresh branch. I've no reason to believe that this has invalidated the testing given the lack of change in compaction and the nature of the fixes" * tag 'mm-compaction-5.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mel/linux: mm/compaction.c: abort search if isolation fails mm/compaction.c: correct zone boundary handling when resetting pageblock skip hints
2019-04-05tty: mark Siemens R3964 line discipline as BROKENGreg Kroah-Hartman1-1/+1
The n_r3964 line discipline driver was written in a different time, when SMP machines were rare, and users were trusted to do the right thing. Since then, the world has moved on but not this code, it has stayed rooted in the past with its lovely hand-crafted list structures and loads of "interesting" race conditions all over the place. After attempting to clean up most of the issues, I just gave up and am now marking the driver as BROKEN so that hopefully someone who has this hardware will show up out of the woodwork (I know you are out there!) and will help with debugging a raft of changes that I had laying around for the code, but was too afraid to commit as odds are they would break things. Many thanks to Jann and Linus for pointing out the initial problems in this codebase, as well as many reviews of my attempts to fix the issues. It was a case of whack-a-mole, and as you can see, the mole won. Reported-by: Jann Horn <jannh@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-04-05block: Revert v5.0 blk_mq_request_issue_directly() changesBart Van Assche4-69/+71
blk_mq_try_issue_directly() can return BLK_STS*_RESOURCE for requests that have been queued. If that happens when blk_mq_try_issue_directly() is called by the dm-mpath driver then dm-mpath will try to resubmit a request that is already queued and a kernel crash follows. Since it is nontrivial to fix blk_mq_request_issue_directly(), revert the blk_mq_request_issue_directly() changes that went into kernel v5.0. This patch reverts the following commits: * d6a51a97c0b2 ("blk-mq: replace and kill blk_mq_request_issue_directly") # v5.0. * 5b7a6f128aad ("blk-mq: issue directly with bypass 'false' in blk_mq_sched_insert_requests") # v5.0. * 7f556a44e61d ("blk-mq: refactor the code of issue request directly") # v5.0. Cc: Christoph Hellwig <hch@infradead.org> Cc: Ming Lei <ming.lei@redhat.com> Cc: Jianchao Wang <jianchao.w.wang@oracle.com> Cc: Hannes Reinecke <hare@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Cc: James Smart <james.smart@broadcom.com> Cc: Dongli Zhang <dongli.zhang@oracle.com> Cc: Laurence Oberman <loberman@redhat.com> Cc: <stable@vger.kernel.org> Reported-by: Laurence Oberman <loberman@redhat.com> Tested-by: Laurence Oberman <loberman@redhat.com> Fixes: 7f556a44e61d ("blk-mq: refactor the code of issue request directly") # v5.0. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-05paride/pcd: Fix potential NULL pointer dereference and mem leakYueHaibing1-1/+13
Syzkaller report this: pcd: pcd version 1.07, major 46, nice 0 pcd0: Autoprobe failed pcd: No CD-ROM drive found kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN PTI CPU: 1 PID: 4525 Comm: syz-executor.0 Not tainted 5.1.0-rc3+ #8 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 RIP: 0010:pcd_init+0x95c/0x1000 [pcd] Code: c4 ab f7 48 89 d8 48 c1 e8 03 80 3c 28 00 74 08 48 89 df e8 56 a3 da f7 4c 8b 23 49 8d bc 24 80 05 00 00 48 89 f8 48 c1 e8 03 <80> 3c 28 00 74 05 e8 39 a3 da f7 49 8b bc 24 80 05 00 00 e8 cc b2 RSP: 0018:ffff8881e84df880 EFLAGS: 00010202 RAX: 00000000000000b0 RBX: ffffffffc155a088 RCX: ffffffffc1508935 RDX: 0000000000040000 RSI: ffffc900014f0000 RDI: 0000000000000580 RBP: dffffc0000000000 R08: ffffed103ee658b8 R09: ffffed103ee658b8 R10: 0000000000000001 R11: ffffed103ee658b7 R12: 0000000000000000 R13: ffffffffc155a778 R14: ffffffffc155a4a8 R15: 0000000000000003 FS: 00007fe71bee3700(0000) GS:ffff8881f7300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055a7334441a8 CR3: 00000001e9674003 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: ? 0xffffffffc1508000 ? 0xffffffffc1508000 do_one_initcall+0xbc/0x47d init/main.c:901 do_init_module+0x1b5/0x547 kernel/module.c:3456 load_module+0x6405/0x8c10 kernel/module.c:3804 __do_sys_finit_module+0x162/0x190 kernel/module.c:3898 do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fe71bee2c58 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000020000180 RDI: 0000000000000003 RBP: 00007fe71bee2c70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe71bee36bc R13: 00000000004bcefa R14: 00000000006f6fb0 R15: 0000000000000004 Modules linked in: pcd(+) paride solos_pci atm ts_fsm rtc_mt6397 mac80211 nhc_mobility nhc_udp nhc_ipv6 nhc_hop nhc_dest nhc_fragment nhc_routing 6lowpan rtc_cros_ec memconsole intel_xhci_usb_role_switch roles rtc_wm8350 usbcore industrialio_triggered_buffer kfifo_buf industrialio asc7621 dm_era dm_persistent_data dm_bufio dm_mod tpm gnss_ubx gnss_serial serdev gnss max2165 cpufreq_dt hid_penmount hid menf21bmc_wdt rc_core n_tracesink ide_gd_mod cdns_csi2tx v4l2_fwnode videodev media pinctrl_lewisburg pinctrl_intel iptable_security iptable_raw iptable_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_filter bpfilter ip6_vti ip_vti ip_gre ipip sit tunnel4 ip_tunnel hsr veth netdevsim vxcan batman_adv cfg80211 rfkill chnl_net caif nlmon dummy team bonding vcan bridge stp llc ip6_gre gre ip6_tunnel tunnel6 tun joydev mousedev ppdev kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel aes_x86_64 crypto_simd ide_pci_generic piix input_leds cryptd glue_helper psmouse ide_core intel_agp serio_raw intel_gtt ata_generic i2c_piix4 agpgart pata_acpi parport_pc parport floppy rtc_cmos sch_fq_codel ip_tables x_tables sha1_ssse3 sha1_generic ipv6 [last unloaded: bmc150_magn] Dumping ftrace buffer: (ftrace buffer empty) ---[ end trace d873691c3cd69f56 ]--- If alloc_disk fails in pcd_init_units, cd->disk will be NULL, however in pcd_detect and pcd_exit, it's not check this before free.It may result a NULL pointer dereference. Also when register_blkdev failed, blk_cleanup_queue() and blk_mq_free_tag_set() should be called to free resources. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: 81b74ac68c28 ("paride/pcd: cleanup queues when detection fails") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-04-05syscalls: Remove start and number from syscall_set_arguments() argsSteven Rostedt (VMware)20-304/+88
After removing the start and count arguments of syscall_get_arguments() it seems reasonable to remove them from syscall_set_arguments(). Note, as of today, there are no users of syscall_set_arguments(). But we are told that there will be soon. But for now, at least make it consistent with syscall_get_arguments(). Link: http://lkml.kernel.org/r/20190327222014.GA32540@altlinux.org Cc: Oleg Nesterov <oleg@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Dave Martin <dave.martin@arm.com> Cc: "Dmitry V. Levin" <ldv@altlinux.org> Cc: x86@kernel.org Cc: linux-snps-arc@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-c6x-dev@linux-c6x.org Cc: uclinux-h8-devel@lists.sourceforge.jp Cc: linux-hexagon@vger.kernel.org Cc: linux-ia64@vger.kernel.org Cc: linux-mips@vger.kernel.org Cc: nios2-dev@lists.rocketboards.org Cc: openrisc@lists.librecores.org Cc: linux-parisc@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-riscv@lists.infradead.org Cc: linux-s390@vger.kernel.org Cc: linux-sh@vger.kernel.org Cc: sparclinux@vger.kernel.org Cc: linux-um@lists.infradead.org Cc: linux-xtensa@linux-xtensa.org Cc: linux-arch@vger.kernel.org Acked-by: Max Filippov <jcmvbkbc@gmail.com> # For xtensa changes Acked-by: Will Deacon <will.deacon@arm.com> # For the arm64 bits Reviewed-by: Thomas Gleixner <tglx@linutronix.de> # for x86 Reviewed-by: Dmitry V. Levin <ldv@altlinux.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-04-05syscalls: Remove start and number from syscall_get_arguments() argsSteven Rostedt (Red Hat)29-378/+113
At Linux Plumbers, Andy Lutomirski approached me and pointed out that the function call syscall_get_arguments() implemented in x86 was horribly written and not optimized for the standard case of passing in 0 and 6 for the starting index and the number of system calls to get. When looking at all the users of this function, I discovered that all instances pass in only 0 and 6 for these arguments. Instead of having this function handle different cases that are never used, simply rewrite it to return the first 6 arguments of a system call. This should help out the performance of tracing system calls by ptrace, ftrace and perf. Link: http://lkml.kernel.org/r/20161107213233.754809394@goodmis.org Cc: Oleg Nesterov <oleg@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Dave Martin <dave.martin@arm.com> Cc: "Dmitry V. Levin" <ldv@altlinux.org> Cc: x86@kernel.org Cc: linux-snps-arc@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-c6x-dev@linux-c6x.org Cc: uclinux-h8-devel@lists.sourceforge.jp Cc: linux-hexagon@vger.kernel.org Cc: linux-ia64@vger.kernel.org Cc: linux-mips@vger.kernel.org Cc: nios2-dev@lists.rocketboards.org Cc: openrisc@lists.librecores.org Cc: linux-parisc@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-riscv@lists.infradead.org Cc: linux-s390@vger.kernel.org Cc: linux-sh@vger.kernel.org Cc: sparclinux@vger.kernel.org Cc: linux-um@lists.infradead.org Cc: linux-xtensa@linux-xtensa.org Cc: linux-arch@vger.kernel.org Acked-by: Paul Burton <paul.burton@mips.com> # MIPS parts Acked-by: Max Filippov <jcmvbkbc@gmail.com> # For xtensa changes Acked-by: Will Deacon <will.deacon@arm.com> # For the arm64 bits Reviewed-by: Thomas Gleixner <tglx@linutronix.de> # for x86 Reviewed-by: Dmitry V. Levin <ldv@altlinux.org> Reported-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2019-04-05xen: Prevent buffer overflow in privcmd ioctlDan Carpenter1-0/+3
The "call" variable comes from the user in privcmd_ioctl_hypercall(). It's an offset into the hypercall_page[] which has (PAGE_SIZE / 32) elements. We need to put an upper bound on it to prevent an out of bounds access. Cc: stable@vger.kernel.org Fixes: 1246ae0bb992 ("xen: add variable hypercall caller") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2019-04-05xen: use struct_size() helper in kzalloc()Andrea Righi1-2/+1
struct privcmd_buf_vma_private has a zero-sized array at the end (pages), use the new struct_size() helper to determine the proper allocation size and avoid potential type mistakes. Signed-off-by: Andrea Righi <andrea.righi@canonical.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2019-04-04Merge tag 'drm-fixes-2019-04-05' of git://anongit.freedesktop.org/drm/drmLinus Torvalds11-17/+44
Pull drm fixes from Dave Airlie: "Pretty quiet week, just some amdgpu and i915 fixes. i915: - deadlock fix - gvt fixes amdgpu: - PCIE dpm feature fix - Powerplay fixes" * tag 'drm-fixes-2019-04-05' of git://anongit.freedesktop.org/drm/drm: drm/i915/gvt: Fix kerneldoc typo for intel_vgpu_emulate_hotplug drm/i915/gvt: Correct the calculation of plane size drm/amdgpu: remove unnecessary rlc reset function on gfx9 drm/i915: Always backoff after a drm_modeset_lock() deadlock drm/i915/gvt: do not let pin count of shadow mm go negative drm/i915/gvt: do not deliver a workload if its creation fails drm/amd/display: VBIOS can't be light up HDMI when restart system drm/amd/powerplay: fix possible hang with 3+ 4K monitors drm/amd/powerplay: correct data type to avoid overflow drm/amd/powerplay: add ECC feature bit drm/amd/amdgpu: fix PCIe dpm feature issue (v3)
2019-04-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds122-563/+1096
Pull networking fixes from David Miller: 1) Several hash table refcount fixes in batman-adv, from Sven Eckelmann. 2) Use after free in bpf_evict_inode(), from Daniel Borkmann. 3) Fix mdio bus registration in ixgbe, from Ivan Vecera. 4) Unbounded loop in __skb_try_recv_datagram(), from Paolo Abeni. 5) ila rhashtable corruption fix from Herbert Xu. 6) Don't allow upper-devices to be added to vrf devices, from Sabrina Dubroca. 7) Add qmi_wwan device ID for Olicard 600, from Bjørn Mork. 8) Don't leave skb->next poisoned in __netif_receive_skb_list_ptype, from Alexander Lobakin. 9) Missing IDR checks in mlx5 driver, from Aditya Pakki. 10) Fix false connection termination in ktls, from Jakub Kicinski. 11) Work around some ASPM issues with r8169 by disabling rx interrupt coalescing on certain chips. From Heiner Kallweit. 12) Properly use per-cpu qstat values on NOLOCK qdiscs, from Paolo Abeni. 13) Fully initialize sockaddr_in structures in SCTP, from Xin Long. 14) Various BPF flow dissector fixes from Stanislav Fomichev. 15) Divide by zero in act_sample, from Davide Caratti. 16) Fix bridging multicast regression introduced by rhashtable conversion, from Nikolay Aleksandrov. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (106 commits) ibmvnic: Fix completion structure initialization ipv6: sit: reset ip header pointer in ipip6_rcv net: bridge: always clear mcast matching struct on reports and leaves libcxgb: fix incorrect ppmax calculation vlan: conditional inclusion of FCoE hooks to match netdevice.h and bnx2x sch_cake: Make sure we can write the IP header before changing DSCP bits sch_cake: Use tc_skb_protocol() helper for getting packet protocol tcp: Ensure DCTCP reacts to losses net/sched: act_sample: fix divide by zero in the traffic path net: thunderx: fix NULL pointer dereference in nicvf_open/nicvf_stop net: hns: Fix sparse: some warnings in HNS drivers net: hns: Fix WARNING when remove HNS driver with SMMU enabled net: hns: fix ICMP6 neighbor solicitation messages discard problem net: hns: Fix probabilistic memory overwrite when HNS driver initialized net: hns: Use NAPI_POLL_WEIGHT for hns driver net: hns: fix KASAN: use-after-free in hns_nic_net_xmit_hw() flow_dissector: rst'ify documentation ipv6: Fix dangling pointer when ipv6 fragment net-gro: Fix GRO flush when receiving a GSO packet. flow_dissector: document BPF flow dissector environment ...
2019-04-04xtensa: fix format string warning in init_pmdMax Filippov1-1/+1
Use %lu instead of %zu to fix the following warning introduced with recent memblock refactoring: xtensa/mm/mmu.c:36:9: warning: format '%zu' expects argument of type 'size_t', but argument 3 has type 'long unsigned int Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2019-04-04ibmvnic: Fix completion structure initializationThomas Falcon1-2/+3
Fix device initialization completion handling for vNIC adapters. Initialize the completion structure on probe and reinitialize when needed. This also fixes a race condition during kdump where the driver can attempt to access the completion struct before it is initialized: Unable to handle kernel paging request for data at address 0x00000000 Faulting instruction address: 0xc0000000081acbe0 Oops: Kernel access of bad area, sig: 11 [#1] LE SMP NR_CPUS=2048 NUMA pSeries Modules linked in: ibmvnic(+) ibmveth sunrpc overlay squashfs loop CPU: 19 PID: 301 Comm: systemd-udevd Not tainted 4.18.0-64.el8.ppc64le #1 NIP: c0000000081acbe0 LR: c0000000081ad964 CTR: c0000000081ad900 REGS: c000000027f3f990 TRAP: 0300 Not tainted (4.18.0-64.el8.ppc64le) MSR: 800000010280b033 <SF,VEC,VSX,EE,FP,ME,IR,DR,RI,LE,TM[E]> CR: 28228288 XER: 00000006 CFAR: c000000008008934 DAR: 0000000000000000 DSISR: 40000000 IRQMASK: 1 GPR00: c0000000081ad964 c000000027f3fc10 c0000000095b5800 c0000000221b4e58 GPR04: 0000000000000003 0000000000000001 000049a086918581 00000000000000d4 GPR08: 0000000000000007 0000000000000000 ffffffffffffffe8 d0000000014dde28 GPR12: c0000000081ad900 c000000009a00c00 0000000000000001 0000000000000100 GPR16: 0000000000000038 0000000000000007 c0000000095e2230 0000000000000006 GPR20: 0000000000400140 0000000000000001 c00000000910c880 0000000000000000 GPR24: 0000000000000000 0000000000000006 0000000000000000 0000000000000003 GPR28: 0000000000000001 0000000000000001 c0000000221b4e60 c0000000221b4e58 NIP [c0000000081acbe0] __wake_up_locked+0x50/0x100 LR [c0000000081ad964] complete+0x64/0xa0 Call Trace: [c000000027f3fc10] [c000000027f3fc60] 0xc000000027f3fc60 (unreliable) [c000000027f3fc60] [c0000000081ad964] complete+0x64/0xa0 [c000000027f3fca0] [d0000000014dad58] ibmvnic_handle_crq+0xce0/0x1160 [ibmvnic] [c000000027f3fd50] [d0000000014db270] ibmvnic_tasklet+0x98/0x130 [ibmvnic] [c000000027f3fda0] [c00000000813f334] tasklet_action_common.isra.3+0xc4/0x1a0 [c000000027f3fe00] [c000000008cd13f4] __do_softirq+0x164/0x400 [c000000027f3fef0] [c00000000813ed64] irq_exit+0x184/0x1c0 [c000000027f3ff20] [c0000000080188e8] __do_irq+0xb8/0x210 [c000000027f3ff90] [c00000000802d0a4] call_do_irq+0x14/0x24 [c000000026a5b010] [c000000008018adc] do_IRQ+0x9c/0x130 [c000000026a5b060] [c000000008008ce4] hardware_interrupt_common+0x114/0x120 Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-04ipv6: sit: reset ip header pointer in ipip6_rcvLorenzo Bianconi1-0/+4
ipip6 tunnels run iptunnel_pull_header on received skbs. This can determine the following use-after-free accessing iph pointer since the packet will be 'uncloned' running pskb_expand_head if it is a cloned gso skb (e.g if the packet has been sent though a veth device) [ 706.369655] BUG: KASAN: use-after-free in ipip6_rcv+0x1678/0x16e0 [sit] [ 706.449056] Read of size 1 at addr ffffe01b6bd855f5 by task ksoftirqd/1/= [ 706.669494] Hardware name: HPE ProLiant m400 Server/ProLiant m400 Server, BIOS U02 08/19/2016 [ 706.771839] Call trace: [ 706.801159] dump_backtrace+0x0/0x2f8 [ 706.845079] show_stack+0x24/0x30 [ 706.884833] dump_stack+0xe0/0x11c [ 706.925629] print_address_description+0x68/0x260 [ 706.982070] kasan_report+0x178/0x340 [ 707.025995] __asan_report_load1_noabort+0x30/0x40 [ 707.083481] ipip6_rcv+0x1678/0x16e0 [sit] [ 707.132623] tunnel64_rcv+0xd4/0x200 [tunnel4] [ 707.185940] ip_local_deliver_finish+0x3b8/0x988 [ 707.241338] ip_local_deliver+0x144/0x470 [ 707.289436] ip_rcv_finish+0x43c/0x14b0 [ 707.335447] ip_rcv+0x628/0x1138 [ 707.374151] __netif_receive_skb_core+0x1670/0x2600 [ 707.432680] __netif_receive_skb+0x28/0x190 [ 707.482859] process_backlog+0x1d0/0x610 [ 707.529913] net_rx_action+0x37c/0xf68 [ 707.574882] __do_softirq+0x288/0x1018 [ 707.619852] run_ksoftirqd+0x70/0xa8 [ 707.662734] smpboot_thread_fn+0x3a4/0x9e8 [ 707.711875] kthread+0x2c8/0x350 [ 707.750583] ret_from_fork+0x10/0x18 [ 707.811302] Allocated by task 16982: [ 707.854182] kasan_kmalloc.part.1+0x40/0x108 [ 707.905405] kasan_kmalloc+0xb4/0xc8 [ 707.948291] kasan_slab_alloc+0x14/0x20 [ 707.994309] __kmalloc_node_track_caller+0x158/0x5e0 [ 708.053902] __kmalloc_reserve.isra.8+0x54/0xe0 [ 708.108280] __alloc_skb+0xd8/0x400 [ 708.150139] sk_stream_alloc_skb+0xa4/0x638 [ 708.200346] tcp_sendmsg_locked+0x818/0x2b90 [ 708.251581] tcp_sendmsg+0x40/0x60 [ 708.292376] inet_sendmsg+0xf0/0x520 [ 708.335259] sock_sendmsg+0xac/0xf8 [ 708.377096] sock_write_iter+0x1c0/0x2c0 [ 708.424154] new_sync_write+0x358/0x4a8 [ 708.470162] __vfs_write+0xc4/0xf8 [ 708.510950] vfs_write+0x12c/0x3d0 [ 708.551739] ksys_write+0xcc/0x178 [ 708.592533] __arm64_sys_write+0x70/0xa0 [ 708.639593] el0_svc_handler+0x13c/0x298 [ 708.686646] el0_svc+0x8/0xc [ 708.739019] Freed by task 17: [ 708.774597] __kasan_slab_free+0x114/0x228 [ 708.823736] kasan_slab_free+0x10/0x18 [ 708.868703] kfree+0x100/0x3d8 [ 708.905320] skb_free_head+0x7c/0x98 [ 708.948204] skb_release_data+0x320/0x490 [ 708.996301] pskb_expand_head+0x60c/0x970 [ 709.044399] __iptunnel_pull_header+0x3b8/0x5d0 [ 709.098770] ipip6_rcv+0x41c/0x16e0 [sit] [ 709.146873] tunnel64_rcv+0xd4/0x200 [tunnel4] [ 709.200195] ip_local_deliver_finish+0x3b8/0x988 [ 709.255596] ip_local_deliver+0x144/0x470 [ 709.303692] ip_rcv_finish+0x43c/0x14b0 [ 709.349705] ip_rcv+0x628/0x1138 [ 709.388413] __netif_receive_skb_core+0x1670/0x2600 [ 709.446943] __netif_receive_skb+0x28/0x190 [ 709.497120] process_backlog+0x1d0/0x610 [ 709.544169] net_rx_action+0x37c/0xf68 [ 709.589131] __do_softirq+0x288/0x1018 [ 709.651938] The buggy address belongs to the object at ffffe01b6bd85580 which belongs to the cache kmalloc-1024 of size 1024 [ 709.804356] The buggy address is located 117 bytes inside of 1024-byte region [ffffe01b6bd85580, ffffe01b6bd85980) [ 709.946340] The buggy address belongs to the page: [ 710.003824] page:ffff7ff806daf600 count:1 mapcount:0 mapping:ffffe01c4001f600 index:0x0 [ 710.099914] flags: 0xfffff8000000100(slab) [ 710.149059] raw: 0fffff8000000100 dead000000000100 dead000000000200 ffffe01c4001f600 [ 710.242011] raw: 0000000000000000 0000000000380038 00000001ffffffff 0000000000000000 [ 710.334966] page dumped because: kasan: bad access detected Fix it resetting iph pointer after iptunnel_pull_header Fixes: a09a4c8dd1ec ("tunnels: Remove encapsulation offloads on decap") Tested-by: Jianlin Shi <jishi@redhat.com> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-04Merge tag 'riscv-for-linus-5.1-rc4' of ↵Linus Torvalds7-14/+37
git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux Pull RISC-V fixes from Palmer Dabbelt: "I dropped the ball a bit here: these patches should all probably have been part of rc2, but I wanted to get around to properly testing them in the various configurations (qemu32, qeum64, unleashed) first. Unfortunately I've been traveling and didn't have time to actually do that, but since these fix concrete bugs and pass my old set of tests I don't want to delay the fixes any longer. There are four independent fixes here: - A fix for the rv32 port that corrects the 64-bit user accesor's fixup label address. - A fix for a regression introduced during the merge window that broke medlow configurations at run time. This patch also includes a fix that disables ftrace for the same set of functions, which was found by inspection at the same time. - A modification of the memory map to avoid overlapping the FIXMAP and VMALLOC regions on systems with small memory maps. - A fix to the module handling code to use the correct syntax for probing Kconfig entries. These have passed my standard test flow, but I didn't have time to expand that testing like I said I would" * tag 'riscv-for-linus-5.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux: RISC-V: Use IS_ENABLED(CONFIG_CMODEL_MEDLOW) RISC-V: Fix FIXMAP_TOP to avoid overlap with VMALLOC area RISC-V: Always compile mm/init.c with cmodel=medany and notrace riscv: fix accessing 8-byte variable from RV32
2019-04-04net: bridge: always clear mcast matching struct on reports and leavesNikolay Aleksandrov1-0/+3
We need to be careful and always zero the whole br_ip struct when it is used for matching since the rhashtable change. This patch fixes all the places which didn't properly clear it which in turn might've caused mismatches. Thanks for the great bug report with reproducing steps and bisection. Steps to reproduce (from the bug report): ip link add br0 type bridge mcast_querier 1 ip link set br0 up ip link add v2 type veth peer name v3 ip link set v2 master br0 ip link set v2 up ip link set v3 up ip addr add 3.0.0.2/24 dev v3 ip netns add test ip link add v1 type veth peer name v1 netns test ip link set v1 master br0 ip link set v1 up ip -n test link set v1 up ip -n test addr add 3.0.0.1/24 dev v1 # Multicast receiver ip netns exec test socat UDP4-RECVFROM:5588,ip-add-membership=224.224.224.224:3.0.0.1,fork - # Multicast sender echo hello | nc -u -s 3.0.0.2 224.224.224.224 5588 Reported-by: liam.mcbirnie@boeing.com Fixes: 19e3a9c90c53 ("net: bridge: convert multicast to generic rhashtable") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-04Merge tag 'pm-5.1-rc4' of ↵Linus Torvalds2-59/+223
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "These fix up the intel_pstate driver after recent changes to prevent it from printing pointless messages and update the turbostat utility (mostly fixes and new hardware support). Specifics: - Make intel_pstate only load on Intel processors and prevent it from printing pointless failure messages (Borislav Petkov). - Update the turbostat utility: * Assorted fixes (Ben Hutchings, Len Brown, Prarit Bhargava). * Support for AMD Fam 17h (Zen) RAPL and package power (Calvin Walton). * Support for Intel Icelake and for systems with more than one die per package (Len Brown). * Cleanups (Len Brown)" * tag 'pm-5.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq/intel_pstate: Load only on Intel hardware tools/power turbostat: update version number tools/power turbostat: Warn on bad ACPI LPIT data tools/power turbostat: Add checks for failure of fgets() and fscanf() tools/power turbostat: Also read package power on AMD F17h (Zen) tools/power turbostat: Add support for AMD Fam 17h (Zen) RAPL tools/power turbostat: Do not display an error on systems without a cpufreq driver tools/power turbostat: Add Die column tools/power turbostat: Add Icelake support tools/power turbostat: Cleanup CNL-specific code tools/power turbostat: Cleanup CC3-skip code tools/power turbostat: Restore ability to execute in topology-order
2019-04-04Merge tag 'acpi-5.1-rc4' of ↵Linus Torvalds1-1/+5
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "Prevent stale GPE events from triggering spurious system wakeups from suspend-to-idle (Furquan Shaikh)" * tag 'acpi-5.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPICA: Clear status of GPEs before enabling them
2019-04-05Merge tag 'drm-intel-fixes-2019-04-04' of ↵Dave Airlie5-11/+11
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes Only one fix for DSC (backoff after drm_modeset_lock deadlock) and GVT's fixes including vGPU display plane size calculation, shadow mm pin count, error recovery path for workload create and one kerneldoc fix. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190404161116.GA14522@intel.com
2019-04-04Merge tag 'mfd-fixes-5.1' of ↵Linus Torvalds3-22/+45
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull mfd fixes from Lee Jones: - Fix failed reads due to enabled IRQs when suspended; twl-core - Fix driver registration when using DT; sprd-sc27xx-spi - Fix `make allyesconfig` on x86_64; SUN6I_PRCM * tag 'mfd-fixes-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: mfd: sun6i-prcm: Allow to compile with COMPILE_TEST mfd: sc27xx: Use SoC compatible string for PMIC devices mfd: twl-core: Disable IRQ while suspended
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-07 17:55:28 +0000