summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2019-01-29scsi: 53c700: pass correct "dev" to dma_alloc_attrs()Dan Carpenter1-1/+1
The "hostdata->dev" pointer is NULL here. We set "hostdata->dev = dev;" later in the function and we also use "hostdata->dev" when we call dma_free_attrs() in NCR_700_release(). This bug predates git version control. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-29scsi: bnx2fc: Fix error handling in probe()Dan Carpenter1-2/+2
There are two issues here. First if cmgr->hba is not set early enough then it leads to a NULL dereference. Second if we don't completely initialize cmgr->io_bdt_pool[] then we end up dereferencing uninitialized pointers. Fixes: 853e2bd2103a ("[SCSI] bnx2fc: Broadcom FCoE offload driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-29scsi: scsi_debug: fix write_same with virtual_gb problemDouglas Gilbert1-20/+21
The WRITE SAME(10) and (16) implementations didn't take account of the buffer wrap required when the virtual_gb parameter is greater than 0. Fix that and rename the fake_store() function to lba2fake_store() to lessen confusion with the global fake_storep pointer. Bump version date. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reported-by: Bart Van Assche <bvanassche@acm.org> Tested by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-29scsi: libfc: free skb when receiving invalid flogi respMing Lu1-3/+3
The issue to be fixed in this commit is when libfc found it received a invalid FLOGI response from FC switch, it would return without freeing the fc frame, which is just the skb data. This would cause memory leak if FC switch keeps sending invalid FLOGI responses. This fix is just to make it execute `fc_frame_free(fp)` before returning from function `fc_lport_flogi_resp`. Signed-off-by: Ming Lu <ming.lu@citrix.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-29scsi: zfcp: fix sysfs block queue limit output for max_segment_sizeSteffen Maier2-1/+2
Since v2.6.35 commit 683229845f17 ("[SCSI] zfcp: Report scatter-gather limits to SCSI and block layer"), zfcp set dma_parms.max_segment_size == PAGE_SIZE (but without using the setter dma_set_max_seg_size()) and scsi_host_template.dma_boundary == PAGE_SIZE - 1. v5.0-rc1 commit 50c2e9107f17 ("scsi: introduce a max_segment_size host_template parameters") introduced a new field scsi_host_template.max_segment_size. If an LLDD such as zfcp does not set it, scsi_host_alloc() uses BLK_MAX_SEGMENT_SIZE = 65536 for Scsi_Host.max_segment_size. __scsi_init_queue() announced the minimum of Scsi_Host.max_segment_size and dma_parms.max_segment_size to the block layer. For zfcp: min(65536, 4096) == 4096 which was still good. v5.0 commit a8cf59a6692c ("scsi: communicate max segment size to the DMA mapping code") announces Scsi_Host.max_segment_size to the block layer and overwrites dma_parms.max_segment_size with Scsi_Host.max_segment_size. For zfcp dma_parms.max_segment_size == Scsi_Host.max_segment_size == 65536 which is also reflected in block queue limits. $ cd /sys/bus/ccw/drivers/zfcp $ cd 0.0.3c40/host5/rport-5:0-4/target5:0:4/5:0:4:10/block/sdi/queue $ cat max_segment_size 65536 Zfcp I/O still works because dma_boundary implicitly still keeps the effective max segment size <= PAGE_SIZE. However, dma_boundary does not seem visible to user space, but max_segment_size is visible and shows a misleading wrong value. Fix it and inherit the stable tag of a8cf59a6692c. Devices on our bus ccw support DMA but no DMA mapping. Of multiple device types on the ccw bus, only zfcp needs dma_parms for SCSI limits. So, leave dma_parms setup in zfcp and do not move it to the bus. Signed-off-by: Steffen Maier <maier@linux.ibm.com> Fixes: 50c2e9107f ("scsi: introduce a max_segment_size host_template parameters") Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-22scsi: ufs: Use explicit access size in ufshcd_dump_regsMarc Gonzalez1-2/+8
memcpy_fromio() doesn't provide any control over access size. For example, on arm64, it is implemented using readb and readq. This may trigger a synchronous external abort: [ 3.729943] Internal error: synchronous external abort: 96000210 [#1] PREEMPT SMP [ 3.737000] Modules linked in: [ 3.744371] CPU: 2 PID: 1 Comm: swapper/0 Tainted: G S 4.20.0-rc4 #16 [ 3.747413] Hardware name: Qualcomm Technologies, Inc. MSM8998 v1 MTP (DT) [ 3.755295] pstate: 00000005 (nzcv daif -PAN -UAO) [ 3.761978] pc : __memcpy_fromio+0x68/0x80 [ 3.766718] lr : ufshcd_dump_regs+0x50/0xb0 [ 3.770767] sp : ffff00000807ba00 [ 3.774830] x29: ffff00000807ba00 x28: 00000000fffffffb [ 3.778344] x27: ffff0000089db068 x26: ffff8000f6e58000 [ 3.783728] x25: 000000000000000e x24: 0000000000000800 [ 3.789023] x23: ffff8000f6e587c8 x22: 0000000000000800 [ 3.794319] x21: ffff000008908368 x20: ffff8000f6e1ab80 [ 3.799615] x19: 000000000000006c x18: ffffffffffffffff [ 3.804910] x17: 0000000000000000 x16: 0000000000000000 [ 3.810206] x15: ffff000009199648 x14: ffff000089244187 [ 3.815502] x13: ffff000009244195 x12: ffff0000091ab000 [ 3.820797] x11: 0000000005f5e0ff x10: ffff0000091998a0 [ 3.826093] x9 : 0000000000000000 x8 : ffff8000f6e1ac00 [ 3.831389] x7 : 0000000000000000 x6 : 0000000000000068 [ 3.836676] x5 : ffff8000f6e1abe8 x4 : 0000000000000000 [ 3.841971] x3 : ffff00000928c868 x2 : ffff8000f6e1abec [ 3.847267] x1 : ffff00000928c868 x0 : ffff8000f6e1abe8 [ 3.852567] Process swapper/0 (pid: 1, stack limit = 0x(____ptrval____)) [ 3.857900] Call trace: [ 3.864473] __memcpy_fromio+0x68/0x80 [ 3.866683] ufs_qcom_dump_dbg_regs+0x1c0/0x370 [ 3.870522] ufshcd_print_host_regs+0x168/0x190 [ 3.874946] ufshcd_init+0xd4c/0xde0 [ 3.879459] ufshcd_pltfrm_init+0x3c8/0x550 [ 3.883264] ufs_qcom_probe+0x24/0x60 [ 3.887188] platform_drv_probe+0x50/0xa0 Assuming aligned 32-bit registers, let's use readl, after making sure that 'offset' and 'len' are indeed multiples of 4. Fixes: ba80917d9932d ("scsi: ufs: ufshcd_dump_regs to use memcpy_fromio") Cc: <stable@vger.kernel.org> Signed-off-by: Marc Gonzalez <marc.w.gonzalez@free.fr> Acked-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Jeffrey Hugo <jhugo@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Evan Green <evgreen@chromium.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-22scsi: tcmu: fix use after freeXiubo Li1-1/+2
Fixes: a94a2572b977 ("scsi: tcmu: avoid cmd/qfull timers updated whenever a new cmd comes") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: Mike Christie <mchristi@redhat.com> Signed-off-by: Xiubo Li <xiubli@redhat.com> Reviewed-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-22scsi: csiostor: fix NULL pointer dereference in csio_vport_set_state()Varun Prakash1-1/+1
Assign fc_vport to ln->fc_vport before calling csio_fcoe_alloc_vnp() to avoid a NULL pointer dereference in csio_vport_set_state(). ln->fc_vport is dereferenced in csio_vport_set_state(). Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-22scsi: lpfc: nvmet: avoid hang / use-after-free when destroying targetportEwan D. Milne2-4/+6
We cannot wait on a completion object in the lpfc_nvme_targetport structure in the _destroy_targetport() code path because the NVMe/fc transport will free that structure immediately after the .targetport_delete() callback. This results in a use-after-free, and a hang if slub_debug=FZPU is enabled. Fix this by putting the completion on the stack. Signed-off-by: Ewan D. Milne <emilne@redhat.com> Acked-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-22scsi: lpfc: nvme: avoid hang / use-after-free when destroying localportEwan D. Milne2-8/+10
We cannot wait on a completion object in the lpfc_nvme_lport structure in the _destroy_localport() code path because the NVMe/fc transport will free that structure immediately after the .localport_delete() callback. This results in a use-after-free, and a hang if slub_debug=FZPU is enabled. Fix this by putting the completion on the stack. Signed-off-by: Ewan D. Milne <emilne@redhat.com> Acked-by: James Smart <james.smart@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-22scsi: communicate max segment size to the DMA mapping codeChristoph Hellwig5-29/+20
When a host driver sets a maximum segment size we should not only propagate that setting to the block layer, which can merge segments, but also to the DMA mapping layer which can merge segments as well. Fixes: 50c2e9107f ("scsi: introduce a max_segment_size host_template parameters") Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-11scsi: cxgb4i: add wait_for_completion()Varun Prakash4-18/+31
In case of ->set_param() and ->bind_conn() cxgb4i driver does not wait for cmd completion, this can create race conditions, to avoid this add wait_for_completion(). Signed-off-by: Varun Prakash <varun@chelsio.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-11scsi: qla1280: set 64bit coherent maskThomas Bogendoerfer1-1/+1
After Commit 54aed4dd3526 ("MIPS: IP27: use dma_direct_ops") qla1280 driver failed on SGI IP27 machines with qla1280: QLA1040 found on PCI bus 0, dev 0 qla1280 0000:00:00.0: enabling device (0006 -> 0007) qla1280: Failed to get request memory qla1280: probe of 0000:00:00.0 failed with error -12 Reason is that SGI IP27 always generates 64bit DMA addresses and has no fallback mode for 32bit DMA addresses implemented. QLA1280 supports 64bit addressing for all DMA accesses so setting coherent mask to 64bit fixes the issue. Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-11scsi: ufs: Fix geometry descriptor sizeAvri Altman1-1/+1
Albeit we no longer rely on those hard-coded descriptor sizes, we still use them as our defaults, so better get it right. While adding its sysfs entries, we forgot to update the geometry descriptor size. It is 0x48 according to UFS2.1, and wasn't changed in UFS3.0. [mkp: typo] Fixes: c720c091222e (scsi: ufs: sysfs: geometry descriptor) Signed-off-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-11scsi: megaraid_sas: Retry reads of outbound_intr_status regShivasharan S1-1/+2
commit 272652fcbf1a ("scsi: megaraid_sas: add retry logic in megasas_readl") missed changing readl to megasas_readl in megasas_clear_intr_fusion(). For Aero controllers, reads of outbound_intr_status register needs to be retried. Reported-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-11scsi: qedi: Add ep_state for login completion on un-reachable targetsManish Rangankar2-0/+4
When the driver finds invalid destination MAC for the first un-reachable target, and before completes the PATH_REQ operation, set new ep_state to OFFLDCONN_NONE so that as part of driver ep_poll mechanism, the upper open-iscsi layer is notified to complete the login process on the first un-reachable target and thus proceed login to other reachable targets. Signed-off-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-11scsi: ufs: Fix system suspend statusStanley Chu1-0/+2
hba->is_sys_suspended is set after successful system suspend but not clear after successful system resume. According to current behavior, hba->is_sys_suspended will not be set if host is runtime-suspended but not system-suspended. Thus we shall aligh the same policy: clear this flag even if host remains runtime-suspended after ufshcd_system_resume is successfully returned. Simply fix this flag to correct host status logs. Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Reviewed-by: Avri Altman <avri.altman@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-11scsi: qla2xxx: Use correct number of vectors for online CPUsMing Lei3-1/+4
When SCSI-MQ is enabled, in some case system would present nr_possible_cpus() which is greater than requested vectors by the driver. This results into driver being able to get larger number of MSI-X vectors than actual online CPUs. Driver then uses pci_alloc_irq_vectors_affinity() to assign 1:1 mapping and affinity for each MSI-x vector to CPUs. When the command is submitted using MSI-x vector, assigned to offline CPU, it results in an ABTS and system hang. This hang is result of a driver not being able to process interrupt on a vector assigned to an Off-line CPUs This patch fixes this issue by setting irq_offset value for the blk_mq_pci_map_queues() to use only those CPUs which has CPU mask affinity assigned and are online. By using the irq_offset value, driver will allow online cpumask to decide which vectors are used in blk_mq_pci_map_queues(). Fixes: 5601236b6f794 ("scsi: qla2xxx: Add Block Multi Queue functionality.") Cc: <stable@vger.kernel.org> #4.19 Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Himanshu Madhani <hmadhani@marvell.com> Tested-by: Himanshu Madhani <hmadhani@marvell.com> Reviewed-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Himanshu Madhani <hmadhani@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-11scsi: hisi_sas: Set protection parameters prior to adding SCSI hostJohn Garry1-6/+6
Currently we set the protection parameters after calling scsi_add_host() for v3 hw. They should be set beforehand, so make this change. Appearantly this fixes our DIX issue (not mainline yet) also, but more testing required. Fixes: d6a9000b81be ("scsi: hisi_sas: Add support for DIF feature for v2 hw") Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-11scsi: tcmu: avoid cmd/qfull timers updated whenever a new cmd comesXiubo Li1-27/+61
Currently there is one cmd timeout timer and one qfull timer for each udev, and whenever any new command is coming in we will update the cmd timer or qfull timer. For some corner cases the timers are always working only for the ringbuffer's and full queue's newest cmd. That's to say the timer won't be fired even if one cmd has been stuck for a very long time and the deadline is reached. This fix will keep the cmd/qfull timers to be pended for the oldest cmd in ringbuffer and full queue, and will update them with the next cmd's deadline only when the old cmd's deadline is reached or removed from the ringbuffer and full queue. Signed-off-by: Xiubo Li <xiubli@redhat.com> Acked-by: Mike Christie <mchristi@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-08scsi: isci: initialize shost fully before calling scsi_add_host()Logan Gunthorpe1-7/+7
scsi_mq_setup_tags(), which is called by scsi_add_host(), calculates the command size to allocate based on the prot_capabilities. In the isci driver, scsi_host_set_prot() is called after scsi_add_host() so the command size gets calculated to be smaller than it needs to be. Eventually, scsi_mq_init_request() locates the 'prot_sdb' after the command assuming it was sized correctly and a buffer overrun may occur. However, seeing blk_mq_alloc_rqs() rounds up to the nearest cache line size, the mistake can go unnoticed. The bug was noticed after the struct request size was reduced by commit 9d037ad707ed ("block: remove req->timeout_list") Which likely reduced the allocated space for the request by an entire cache line, enough that the overflow could be hit and it caused a panic, on boot, at: RIP: 0010:t10_pi_complete+0x77/0x1c0 Call Trace: <IRQ> sd_done+0xf5/0x340 scsi_finish_command+0xc3/0x120 blk_done_softirq+0x83/0xb0 __do_softirq+0xa1/0x2e6 irq_exit+0xbc/0xd0 call_function_single_interrupt+0xf/0x20 </IRQ> sd_done() would call scsi_prot_sg_count() which reads the number of entities in 'prot_sdb', but seeing 'prot_sdb' is located after the end of the allocated space it reads a garbage number and erroneously calls t10_pi_complete(). To prevent this, the calls to scsi_host_set_prot() are moved into isci_host_alloc() before the call to scsi_add_host(). Out of caution, also move the similar call to scsi_host_set_guard(). Fixes: 3d2d75254915 ("[SCSI] isci: T10 DIF support") Link: http://lkml.kernel.org/r/da851333-eadd-163a-8c78-e1f4ec5ec857@deltatee.com Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Cc: Intel SCU Linux support <intel-linux-scu@intel.com> Cc: Artur Paszkiewicz <artur.paszkiewicz@intel.com> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Jens Axboe <axboe@kernel.dk> Cc: Jeff Moyer <jmoyer@redhat.com> Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-08scsi: lpfc: lpfc_sli: Mark expected switch fall-throughsGustavo A. R. Silva1-9/+11
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Notice that, in this particular case, I replaced "Drop thru" and "Fall Thru" with "fall through" annotations, which is what GCC is expecting to find. Also, in some cases a dash is added as a token in order to separate the "fall through" annotation from the rest of the comment on the same line, which is what GCC is expecting to find. Addresses-Coverity-ID: 114979 ("Missing break in switch") Addresses-Coverity-ID: 114980 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Dick Kennedy <dick.kennedy@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-08scsi: smartpqi_init: fix boolean expression in pqi_device_remove_startGustavo A. R. Silva1-1/+1
Fix boolean expression by using logical AND operator '&&' instead of bitwise operator '&'. This issue was detected with the help of Coccinelle. Fixes: 1e46731efd9c ("scsi: smartpqi: check for null device pointers") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-08scsi: core: Synchronize request queue PM status only on successful resumeStanley Chu1-11/+15
The commit 356fd2663cff ("scsi: Set request queue runtime PM status back to active on resume") fixed up the inconsistent RPM status between request queue and device. However changing request queue RPM status shall be done only on successful resume, otherwise status may be still inconsistent as below, Request queue: RPM_ACTIVE Device: RPM_SUSPENDED This ends up soft lockup because requests can be submitted to underlying devices but those devices and their required resource are not resumed. For example, After above inconsistent status happens, IO request can be submitted to UFS device driver but required resource (like clock) is not resumed yet thus lead to warning as below call stack, WARN_ON(hba->clk_gating.state != CLKS_ON); ufshcd_queuecommand scsi_dispatch_cmd scsi_request_fn __blk_run_queue cfq_insert_request __elv_add_request blk_flush_plug_list blk_finish_plug jbd2_journal_commit_transaction kjournald2 We may see all behind IO requests hang because of no response from storage host or device and then soft lockup happens in system. In the end, system may crash in many ways. Fixes: 356fd2663cff (scsi: Set request queue runtime PM status back to active on resume) Cc: stable@vger.kernel.org Signed-off-by: Stanley Chu <stanley.chu@mediatek.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-08scsi: pm80xx: reduce indentationJulia Lawall1-1/+1
Delete tab aligning a statement with the right hand side of a preceding assignment rather than the left hand side. Found with the help of Coccinelle. [mkp: added space] Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-08scsi: qla4xxx: check return code of qla4xxx_copy_from_fwddb_paramYueHaibing1-0/+2
The return code should be check while qla4xxx_copy_from_fwddb_param fails. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-08scsi: megaraid_sas: correct an info messageTomas Henzl1-1/+1
This was apparently forgotten in 894169db1 ("scsi: megaraid_sas: Use 63-bit DMA addressing"). Signed-off-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-08scsi: target/iscsi: fix error msg typo when create lio_qr_cache failedLeo Zhang1-1/+1
Signed-off-by: Leo Zhang <nguzcf@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-08scsi: sd: Fix cache_type_store()Ivan Mironov1-0/+6
Changing of caching mode via /sys/devices/.../scsi_disk/.../cache_type may fail if device responds to MODE SENSE command with DPOFUA flag set, and then checks this flag to be not set on MODE SELECT command. In this scenario, when trying to change cache_type, write always fails: # echo "none" >cache_type bash: echo: write error: Invalid argument And following appears in dmesg: [13007.865745] sd 1:0:1:0: [sda] Sense Key : Illegal Request [current] [13007.865753] sd 1:0:1:0: [sda] Add. Sense: Invalid field in parameter list From SBC-4 r15, 6.5.1 "Mode pages overview", description of DEVICE-SPECIFIC PARAMETER field in the mode parameter header: ... The write protect (WP) bit for mode data sent with a MODE SELECT command shall be ignored by the device server. ... The DPOFUA bit is reserved for mode data sent with a MODE SELECT command. ... The remaining bits in the DEVICE-SPECIFIC PARAMETER byte are also reserved and shall be set to zero. [mkp: shuffled commentary to commit description] Cc: stable@vger.kernel.org Signed-off-by: Ivan Mironov <mironov.ivan@gmail.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-01-06Linux 5.0-rc1v5.0-rc1Linus Torvalds1-3/+3
2019-01-06Merge tag 'kbuild-v4.21-3' of ↵Linus Torvalds94-694/+150
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull more Kbuild updates from Masahiro Yamada: - improve boolinit.cocci and use_after_iter.cocci semantic patches - fix alignment for kallsyms - move 'asm goto' compiler test to Kconfig and clean up jump_label CONFIG option - generate asm-generic wrappers automatically if arch does not implement mandatory UAPI headers - remove redundant generic-y defines - misc cleanups * tag 'kbuild-v4.21-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kconfig: rename generated .*conf-cfg to *conf-cfg kbuild: remove unnecessary stubs for archheader and archscripts kbuild: use assignment instead of define ... endef for filechk_* rules arch: remove redundant UAPI generic-y defines kbuild: generate asm-generic wrappers if mandatory headers are missing arch: remove stale comments "UAPI Header export list" riscv: remove redundant kernel-space generic-y kbuild: change filechk to surround the given command with { } kbuild: remove redundant target cleaning on failure kbuild: clean up rule_dtc_dt_yaml kbuild: remove UIMAGE_IN and UIMAGE_OUT jump_label: move 'asm goto' support test to Kconfig kallsyms: lower alignment on ARM scripts: coccinelle: boolinit: drop warnings on named constants scripts: coccinelle: check for redeclaration kconfig: remove unused "file" field of yylval union nds32: remove redundant kernel-space generic-y nios2: remove unneeded HAS_DMA define
2019-01-06Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds27-166/+620
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf tooling updates form Ingo Molnar: "A final batch of perf tooling changes: mostly fixes and small improvements" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (29 commits) perf session: Add comment for perf_session__register_idle_thread() perf thread-stack: Fix thread stack processing for the idle task perf thread-stack: Allocate an array of thread stacks perf thread-stack: Factor out thread_stack__init() perf thread-stack: Allow for a thread stack array perf thread-stack: Avoid direct reference to the thread's stack perf thread-stack: Tidy thread_stack__bottom() usage perf thread-stack: Simplify some code in thread_stack__process() tools gpio: Allow overriding CFLAGS tools power turbostat: Override CFLAGS assignments and add LDFLAGS to build command tools thermal tmon: Allow overriding CFLAGS assignments tools power x86_energy_perf_policy: Override CFLAGS assignments and add LDFLAGS to build command perf c2c: Increase the HITM ratio limit for displayed cachelines perf c2c: Change the default coalesce setup perf trace beauty ioctl: Beautify USBDEVFS_ commands perf trace beauty: Export function to get the files for a thread perf trace: Wire up ioctl's USBDEBFS_ cmd table generator perf beauty ioctl: Add generator for USBDEVFS_ ioctl commands tools headers uapi: Grab a copy of usbdevice_fs.h perf trace: Store the major number for a file when storing its pathname ...
2019-01-06Change mincore() to count "mapped" pages rather than "cached" pagesLinus Torvalds1-81/+13
The semantics of what "in core" means for the mincore() system call are somewhat unclear, but Linux has always (since 2.3.52, which is when mincore() was initially done) treated it as "page is available in page cache" rather than "page is mapped in the mapping". The problem with that traditional semantic is that it exposes a lot of system cache state that it really probably shouldn't, and that users shouldn't really even care about. So let's try to avoid that information leak by simply changing the semantics to be that mincore() counts actual mapped pages, not pages that might be cheaply mapped if they were faulted (note the "might be" part of the old semantics: being in the cache doesn't actually guarantee that you can access them without IO anyway, since things like network filesystems may have to revalidate the cache before use). In many ways the old semantics were somewhat insane even aside from the information leak issue. From the very beginning (and that beginning is a long time ago: 2.3.52 was released in March 2000, I think), the code had a comment saying Later we can get more picky about what "in core" means precisely. and this is that "later". Admittedly it is much later than is really comfortable. NOTE! This is a real semantic change, and it is for example known to change the output of "fincore", since that program literally does a mmmap without populating it, and then doing "mincore()" on that mapping that doesn't actually have any pages in it. I'm hoping that nobody actually has any workflow that cares, and the info leak is real. We may have to do something different if it turns out that people have valid reasons to want the old semantics, and if we can limit the information leak sanely. Cc: Kevin Easton <kevin@guarana.org> Cc: Jiri Kosina <jikos@kernel.org> Cc: Masatake YAMATO <yamato@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-06Fix 'acccess_ok()' on alpha and SHLinus Torvalds2-5/+10
Commit 594cc251fdd0 ("make 'user_access_begin()' do 'access_ok()'") broke both alpha and SH booting in qemu, as noticed by Guenter Roeck. It turns out that the bug wasn't actually in that commit itself (which would have been surprising: it was mostly a no-op), but in how the addition of access_ok() to the strncpy_from_user() and strnlen_user() functions now triggered the case where those functions would test the access of the very last byte of the user address space. The string functions actually did that user range test before too, but they did it manually by just comparing against user_addr_max(). But with user_access_begin() doing the check (using "access_ok()"), it now exposed problems in the architecture implementations of that function. For example, on alpha, the access_ok() helper macro looked like this: #define __access_ok(addr, size) \ ((get_fs().seg & (addr | size | (addr+size))) == 0) and what it basically tests is of any of the high bits get set (the USER_DS masking value is 0xfffffc0000000000). And that's completely wrong for the "addr+size" check. Because it's off-by-one for the case where we check to the very end of the user address space, which is exactly what the strn*_user() functions do. Why? Because "addr+size" will be exactly the size of the address space, so trying to access the last byte of the user address space will fail the __access_ok() check, even though it shouldn't. As a result, the user string accessor functions failed consistently - because they literally don't know how long the string is going to be, and the max access is going to be that last byte of the user address space. Side note: that alpha macro is buggy for another reason too - it re-uses the arguments twice. And SH has another version of almost the exact same bug: #define __addr_ok(addr) \ ((unsigned long __force)(addr) < current_thread_info()->addr_limit.seg) so far so good: yes, a user address must be below the limit. But then: #define __access_ok(addr, size) \ (__addr_ok((addr) + (size))) is wrong with the exact same off-by-one case: the case when "addr+size" is exactly _equal_ to the limit is actually perfectly fine (think "one byte access at the last address of the user address space") The SH version is actually seriously buggy in another way: it doesn't actually check for overflow, even though it did copy the _comment_ that talks about overflow. So it turns out that both SH and alpha actually have completely buggy implementations of access_ok(), but they happened to work in practice (although the SH overflow one is a serious serious security bug, not that anybody likely cares about SH security). This fixes the problems by using a similar macro on both alpha and SH. It isn't trying to be clever, the end address is based on this logic: unsigned long __ao_end = __ao_a + __ao_b - !!__ao_b; which basically says "add start and length, and then subtract one unless the length was zero". We can't subtract one for a zero length, or we'd just hit an underflow instead. For a lot of access_ok() users the length is a constant, so this isn't actually as expensive as it initially looks. Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net> Cc: Matt Turner <mattst88@gmail.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-06Merge tag 'fscrypt_for_linus' of ↵Linus Torvalds7-188/+468
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt Pull fscrypt updates from Ted Ts'o: "Add Adiantum support for fscrypt" * tag 'fscrypt_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt: fscrypt: add Adiantum support
2019-01-06Merge tag 'ext4_for_linus_stable' of ↵Linus Torvalds4-10/+19
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 bug fixes from Ted Ts'o: "Fix a number of ext4 bugs" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix special inode number checks in __ext4_iget() ext4: track writeback errors using the generic tracking infrastructure ext4: use ext4_write_inode() when fsyncing w/o a journal ext4: avoid kernel warning when writing the superblock to a dead device ext4: fix a potential fiemap/page fault deadlock w/ inline_data ext4: make sure enough credits are reserved for dioread_nolock writes
2019-01-06Merge tag 'dma-mapping-4.21-1' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds8-275/+215
Pull dma-mapping fixes from Christoph Hellwig: "Fix various regressions introduced in this cycles: - fix dma-debug tracking for the map_page / map_single consolidatation - properly stub out DMA mapping symbols for !HAS_DMA builds to avoid link failures - fix AMD Gart direct mappings - setup the dma address for no kernel mappings using the remap allocator" * tag 'dma-mapping-4.21-1' of git://git.infradead.org/users/hch/dma-mapping: dma-direct: fix DMA_ATTR_NO_KERNEL_MAPPING for remapped allocations x86/amd_gart: fix unmapping of non-GART mappings dma-mapping: remove a few unused exports dma-mapping: properly stub out the DMA API for !CONFIG_HAS_DMA dma-mapping: remove dmam_{declare,release}_coherent_memory dma-mapping: implement dmam_alloc_coherent using dmam_alloc_attrs dma-mapping: implement dma_map_single_attrs using dma_map_page_attrs
2019-01-06Merge tag 'tag-chrome-platform-for-v4.21' of ↵Linus Torvalds3-8/+31
git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform Pull chrome platform updates from Benson Leung: - Changes for EC_MKBP_EVENT_SENSOR_FIFO handling. - Also, maintainership changes. Olofj out, Enric balletbo in. * tag 'tag-chrome-platform-for-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform: MAINTAINERS: add maintainers for ChromeOS EC sub-drivers MAINTAINERS: platform/chrome: Add Enric as a maintainer MAINTAINERS: platform/chrome: remove myself as maintainer platform/chrome: don't report EC_MKBP_EVENT_SENSOR_FIFO as wakeup platform/chrome: straighten out cros_ec_get_{next,host}_event() error codes
2019-01-06Merge tag 'hwlock-v4.21' of git://github.com/andersson/remoteprocLinus Torvalds4-0/+189
Pull hwspinlock updates from Bjorn Andersson: "This adds support for the hardware semaphores found in STM32MP1" * tag 'hwlock-v4.21' of git://github.com/andersson/remoteproc: hwspinlock: fix return value check in stm32_hwspinlock_probe() hwspinlock: add STM32 hwspinlock device dt-bindings: hwlock: Document STM32 hwspinlock bindings
2019-01-06fscrypt: add Adiantum supportEric Biggers7-188/+468
Add support for the Adiantum encryption mode to fscrypt. Adiantum is a tweakable, length-preserving encryption mode with security provably reducible to that of XChaCha12 and AES-256, subject to a security bound. It's also a true wide-block mode, unlike XTS. See the paper "Adiantum: length-preserving encryption for entry-level processors" (https://eprint.iacr.org/2018/720.pdf) for more details. Also see commit 059c2a4d8e16 ("crypto: adiantum - add Adiantum support"). On sufficiently long messages, Adiantum's bottlenecks are XChaCha12 and the NH hash function. These algorithms are fast even on processors without dedicated crypto instructions. Adiantum makes it feasible to enable storage encryption on low-end mobile devices that lack AES instructions; currently such devices are unencrypted. On ARM Cortex-A7, on 4096-byte messages Adiantum encryption is about 4 times faster than AES-256-XTS encryption; decryption is about 5 times faster. In fscrypt, Adiantum is suitable for encrypting both file contents and names. With filenames, it fixes a known weakness: when two filenames in a directory share a common prefix of >= 16 bytes, with CTS-CBC their encrypted filenames share a common prefix too, leaking information. Adiantum does not have this problem. Since Adiantum also accepts long tweaks (IVs), it's also safe to use the master key directly for Adiantum encryption rather than deriving per-file keys, provided that the per-file nonce is included in the IVs and the master key isn't used for any other encryption mode. This configuration saves memory and improves performance. A new fscrypt policy flag is added to allow users to opt-in to this configuration. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-01-05Merge tag 'docs-5.0-fixes' of git://git.lwn.net/linuxLinus Torvalds5-10/+4
Pull documentation fixes from Jonathan Corbet: "A handful of late-arriving documentation fixes" * tag 'docs-5.0-fixes' of git://git.lwn.net/linux: doc: filesystems: fix bad references to nonexistent ext4.rst file Documentation/admin-guide: update URL of LKML information link Docs/kernel-api.rst: Remove blk-tag.c reference
2019-01-05Merge tag 'firewire-update' of ↵Linus Torvalds1-1/+0
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394 Pull firewire fixlet from Stefan Richter: "Remove an explicit dependency in Kconfig which is implied by another dependency" * tag 'firewire-update' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394: firewire: Remove depends on HAS_DMA in case of platform dependency
2019-01-05Merge tag 'for-linus-20190104' of git://git.kernel.dk/linux-blockLinus Torvalds8-97/+101
Pull block updates and fixes from Jens Axboe: - Pulled in MD changes that Shaohua had queued up for 4.21. Unfortunately we lost Shaohua late 2018, I'm sending these in on his behalf. - In conjunction with the above, I added a CREDITS entry for Shaoua. - sunvdc queue restart fix (Ming) * tag 'for-linus-20190104' of git://git.kernel.dk/linux-block: Add CREDITS entry for Shaohua Li block: sunvdc: don't run hw queue synchronously from irq context md: fix raid10 hang issue caused by barrier raid10: refactor common wait code from regular read/write request md: remvoe redundant condition check lib/raid6: add option to skip algo benchmarking lib/raid6: sort algos in rough performance order lib/raid6: check for assembler SSSE3 support lib/raid6: avoid __attribute_const__ redefinition lib/raid6: add missing include for raid6test md: remove set but not used variable 'bi_rdev'
2019-01-05Merge tag 'drm-next-2019-01-05' of git://anongit.freedesktop.org/drm/drmLinus Torvalds51-290/+628
Pull drm fixes from Dave Airlie: "Happy New Year, just decloaking from leave to get some stuff from the last week in before rc1: core: - two regression fixes for damage blob and atomic i915 gvt: - Some missed GVT fixes from the original pull amdgpu: - new PCI IDs - SR-IOV fixes - DC fixes - Vega20 fixes" * tag 'drm-next-2019-01-05' of git://anongit.freedesktop.org/drm/drm: (53 commits) drm: Put damage blob when destroy plane state drm: fix null pointer dereference on null state pointer drm/amdgpu: Add new VegaM pci id drm/ttm: Use drm_debug_printer for all ttm_bo_mem_space_debug output drm/amdgpu: add Vega20 PSP ASD firmware loading drm/amd/display: Fix MST dp_blank REG_WAIT timeout drm/amd/display: validate extended dongle caps drm/amd/display: Use div_u64 for flip timestamp ns to ms drm/amdgpu/uvd:Change uvd ring name convention drm/amd/powerplay: add Vega20 LCLK DPM level setting support drm/amdgpu: print process info when job timeout drm/amdgpu/nbio7.4: add hw bug workaround for vega20 drm/amdgpu/nbio6.1: add hw bug workaround for vega10/12 drm/amd/display: Optimize passive update planes. drm/amd/display: verify lane status before exiting verify link cap drm/amd/display: Fix bug with not updating VSP infoframe drm/amd/display: Add retry to read ddc_clock pin drm/amd/display: Don't skip link training for empty dongle drm/amd/display: Wait edp HPD to high in detect_sink drm/amd/display: fix surface update sequence ...
2019-01-05Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds6-21/+10
Pull rdma fixes from Jason Gunthorpe: "Over the break a few defects were found, so this is a -rc style pull request of various small things that have been posted. - An attempt to shorten RCU grace period driven delays showed crashes during heavier testing, and has been entirely reverted - A missed merge/rebase error between the advise_mr and ib_device_ops series - Some small static analysis driven fixes from Julia and Aditya - Missed ability to create a XRC_INI in the devx verbs interop series" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: infiniband/qedr: Potential null ptr dereference of qp infiniband: bnxt_re: qplib: Check the return value of send_message IB/ipoib: drop useless LIST_HEAD IB/core: Add advise_mr to the list of known ops Revert "IB/mlx5: Fix long EEH recover time with NVMe offloads" IB/mlx5: Allow XRC INI usage via verbs in DEVX context
2019-01-05Merge tag 'fbdev-v4.21' of git://github.com/bzolnier/linuxLinus Torvalds15-47/+71
Pull fbdev updates from Bartlomiej Zolnierkiewicz: "This time the pull request is really small. The most notable changes are fixing fbcon to not cause crash on unregister_framebuffer() operation when there is more than one framebuffer, adding config option to center the bootup logo and making FB_BACKLIGHT config option tristate (which in turn uncovered incorrect FB_BACKLIGHT usage by DRM's nouveau driver). Summary: - fix fbcon to not cause crash on unregister_framebuffer() when there is more than one framebuffer (Noralf Trønnes) - improve support for small rotated displays (Peter Rosin) - fix probe failure handling in udlfb driver (Dan Carpenter) - add config option to center the bootup logo (Peter Rosin) - make FB_BACKLIGHT config option tristate (Rob Clark) - remove superfluous HAS_DMA dependency for goldfishfb driver (Geert Uytterhoeven) - misc fixes (Alexey Khoroshilov, YueHaibing, Colin Ian King, Lubomir Rintel) - misc cleanups (Yangtao Li, Wen Yang) also there is DRM's nouveau driver fix for wrong FB_BACKLIGHT config option usage (FB_BACKLIGHT is for internal fbdev subsystem use only)" * tag 'fbdev-v4.21' of git://github.com/bzolnier/linux: drm/nouveau: fix incorrect FB_BACKLIGHT usage in Kconfig fbdev: fbcon: Fix unregister crash when more than one framebuffer fbdev: Remove depends on HAS_DMA in case of platform dependency pxa168fb: trivial typo fix fbdev: fsl-diu: remove redundant null check on cmap fbdev: omap2: omapfb: convert to DEFINE_SHOW_ATTRIBUTE fbdev: uvesafb: fix spelling mistake "memoery" -> "memory" fbdev: fbmem: add config option to center the bootup logo fbdev: fbmem: make fb_show_logo_line return the end instead of the height video: fbdev: pxafb: Fix "WARNING: invalid free of devm_ allocated data" fbdev: fbmem: behave better with small rotated displays and many CPUs video: clps711x-fb: release disp device node in probe() fbdev: make FB_BACKLIGHT a tristate udlfb: fix some inconsistent NULL checking
2019-01-05Merge branch 'i2c/for-5.0' of ↵Linus Torvalds22-137/+346
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "I2C has only driver updates for you this time. Mostly new IDs/DT compatibles, also SPDX conversions, small cleanups. STM32F7 got FastMode+ and PM support, Axxia some reliabilty improvements" * 'i2c/for-5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (26 commits) i2c: Add Actions Semiconductor Owl family S700 I2C support dt-bindings: i2c: Add S700 support for Actions Semi Soc's i2c: ismt: Add support for Intel Cedar Fork i2c: tegra: Switch to SPDX identifier i2c: tegra: Add missing kerneldoc for some fields i2c: tegra: Cleanup kerneldoc comments i2c: axxia: support sequence command mode dt-bindings: i2c: rcar: Add r8a774c0 support dt-bindings: i2c: sh_mobile: Add r8a774c0 support i2c: sh_mobile: Add support for r8a774c0 (RZ/G2E) i2c: i2c-cros-ec-tunnel: Switch to SPDX identifier. i2c: powermac: Use of_node_name_eq for node name comparisons i2c-axxia: check for error conditions first i2c-axxia: dedicated function to set client addr dt-bindings: i2c: Use correct vendor prefix for Atmel i2c: tegra: replace spin_lock_irqsave with spin_lock in ISR eeprom: at24: add support for 24c2048 dt-bindings: eeprom: at24: add "atmel,24c2048" compatible string i2c: i2c-stm32f7: add PM Runtime support i2c: sh_mobile: add support for r8a77990 (R-Car E3) ...
2019-01-05Merge tag 'pci-v4.21-changes' of ↵Linus Torvalds37-210/+1721
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - Remove unused lists from ASPM pcie_link_state (Frederick Lawler) - Fix Broadcom CNB20LE host bridge unintended sign extension (Colin Ian King) - Expand Kconfig "PF" acronyms (Randy Dunlap) - Update MAINTAINERS for arch/x86/kernel/early-quirks.c (Bjorn Helgaas) - Add missing include to drivers/pci.h (Alexandru Gagniuc) - Override Synopsys USB 3.x HAPS device class so dwc3-haps can claim it instead of xhci (Thinh Nguyen) - Clean up P2PDMA documentation (Randy Dunlap) - Allow runtime PM even if driver doesn't supply callbacks (Jarkko Nikula) - Remove status check after submitting Switchtec MRPC Firmware Download commands to avoid Completion Timeouts (Kelvin Cao) - Set Switchtec coherent DMA mask to allow 64-bit DMA (Boris Glimcher) - Fix Switchtec SWITCHTEC_IOCTL_EVENT_IDX_ALL flag overwrite issue (Joey Zhang) - Enable write combining for Switchtec MRPC Input buffers (Kelvin Cao) - Add Switchtec MRPC DMA mode support (Wesley Sheng) - Skip VF scanning on powerpc, which does this in firmware (Sebastian Ott) - Add Amlogic Meson PCIe controller driver and DT bindings (Yue Wang) - Constify histb dw_pcie_host_ops structure (Julia Lawall) - Support multiple power domains for imx6 (Leonard Crestez) - Constify layerscape driver data (Stefan Agner) - Update imx6 Kconfig to allow imx6 PCIe in imx7 kernel (Trent Piepho) - Support armada8k GPIO reset (Baruch Siach) - Support suspend/resume support on imx6 (Leonard Crestez) - Don't hard-code DesignWare DBI/ATU offst (Stephen Warren) - Skip i.MX6 PHY setup on i.MX7D (Andrey Smirnov) - Remove Jianguo Sun from HiSilicon STB maintainers (Lorenzo Pieralisi) - Mask DesignWare interrupts instead of disabling them to avoid lost interrupts (Marc Zyngier) - Add locking when acking DesignWare interrupts (Marc Zyngier) - Ack DesignWare interrupts in the proper callbacks (Marc Zyngier) - Use devm resource parser in mediatek (Honghui Zhang) - Remove unused mediatek "num-lanes" DT property (Honghui Zhang) - Add UniPhier PCIe controller driver and DT bindings (Kunihiko Hayashi) - Enable MSI for imx6 downstream components (Richard Zhu) * tag 'pci-v4.21-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (40 commits) PCI: imx: Enable MSI from downstream components s390/pci: skip VF scanning PCI/IOV: Add flag so platforms can skip VF scanning PCI/IOV: Factor out sriov_add_vfs() PCI: uniphier: Add UniPhier PCIe host controller support dt-bindings: PCI: Add UniPhier PCIe host controller description PCI: amlogic: Add the Amlogic Meson PCIe controller driver dt-bindings: PCI: meson: add DT bindings for Amlogic Meson PCIe controller arm64: dts: mt7622: Remove un-used property for PCIe arm: dts: mt7623: Remove un-used property for PCIe dt-bindings: PCI: MediaTek: Remove un-used property PCI: mediatek: Remove un-used variant in struct mtk_pcie_port MAINTAINERS: Remove Jianguo Sun from HiSilicon STB DWC entry PCI: dwc: Don't hard-code DBI/ATU offset PCI: imx: Add imx6sx suspend/resume support PCI: armada8k: Add support for gpio controlled reset signal PCI: dwc: Adjust Kconfig to allow IMX6 PCIe host on IMX7 PCI: dwc: layerscape: Constify driver data PCI: imx: Add multi-pd support PCI: Override Synopsys USB 3.x HAPS device class ...
2019-01-05Merge branch 'for-linus' of ↵Linus Torvalds17-61/+720
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID updates from Jiri Kosina: - high-resolution scrolling support that gracefully handles differences between MS and Logitech implementations in HW, from Peter Hutterer and Harry Cutts - MSI IRQ support for intel-ish driver, from Song Hongyan - support for new hardware (Cougar 700K, Odys Winbook 13, ASUS FX503VD, ASUS T101HA) from Daniel M. Lambea, Hans de Goede and Aleix Roca Nonell - other small assorted fixups * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (22 commits) HID: i2c-hid: Add Odys Winbook 13 to descriptor override HID: lenovo: Add checks to fix of_led_classdev_register HID: intel-ish-hid: add MSI interrupt support HID: debug: Change to use DEFINE_SHOW_ATTRIBUTE macro HID: doc: fix wrong data structure reference for UHID_OUTPUT HID: intel-ish-hid: fixes incorrect error handling HID: asus: Add support for the ASUS T101HA keyboard dock HID: logitech: Use LDJ_DEVICE macro for existing Logitech mice HID: logitech: Enable high-resolution scrolling on Logitech mice HID: logitech: Add function to enable HID++ 1.0 "scrolling acceleration" HID: logitech-hidpp: fix typo, hiddpp to hidpp HID: input: use the Resolution Multiplier for high-resolution scrolling HID: core: process the Resolution Multiplier HID: core: store the collections as a basic tree Input: add `REL_WHEEL_HI_RES` and `REL_HWHEEL_HI_RES` HID: input: support Microsoft wireless radio control hotkey HID: use macros in IS_INPUT_APPLICATION HID: asus: Add support for the ASUS FX503VD laptop HID: asus: Add event handler to catch unmapped Asus Vendor UsagePage codes HID: cougar: Add support for Cougar 700K Gaming Keyboard ...
2019-01-05Merge branch 'for-linus' of ↵Linus Torvalds2-0/+9
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching Pull livepatch update from Jiri Kosina: "Return value checking fixup in livepatching samples, from Nicholas Mc Guire" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching: livepatch: check kzalloc return values
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-19 07:05:51 +0000