| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC updates from Olof Johansson:
"A few SoC (code) changes have queued up this cycle, mostly for minor
changes and some refactoring and cleanup of legacy platforms. This
branch also contains a few of the fixes that weren't sent in by the
end of the release (all fairly minor).
- Adding an additional maintainer for the TEE subsystem (Sumit Garg)
- Quite a significant modernization of the IXP4xx platforms by Linus
Walleij, revisiting with a new PCI host driver/binding, removing
legacy mach/* include dependencies and moving platform
detection/config to drivers/soc. Also some updates/cleanup of
platform data.
- Core power domain support for Tegra platforms, and some
improvements in build test coverage by adding stubs for compile
test targets.
- A handful of updates to i.MX platforms, adding legacy (non-PSCI)
SMP support on i.MX7D, SoC ID setup for i.MX50, removal of platform
data and board fixups for iMX6/7.
... and a few smaller changes and fixes for Samsung, OMAP, Allwinner,
Rockchip"
* tag 'arm-soc-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (53 commits)
MAINTAINERS: Add myself as TEE subsystem reviewer
ixp4xx: fix spelling mistake in Kconfig "Devce" -> "Device"
hw_random: ixp4xx: Add OF support
hw_random: ixp4xx: Add DT bindings
hw_random: ixp4xx: Turn into a module
hw_random: ixp4xx: Use SPDX license tag
hw_random: ixp4xx: enable compile-testing
pata: ixp4xx: split platform data to its own header
soc: ixp4xx: move cpu detection to linux/soc/ixp4xx/cpu.h
PCI: ixp4xx: Add a new driver for IXP4xx
PCI: ixp4xx: Add device tree bindings for IXP4xx
ARM/ixp4xx: Make NEED_MACH_IO_H optional
ARM/ixp4xx: Move the virtual IObases
MAINTAINERS: ARM/MStar/Sigmastar SoCs: Add a link to the MStar tree
ARM: debug: add UART early console support for MSTAR SoCs
ARM: dts: ux500: Fix LED probing
ARM: imx: add smp support for imx7d
ARM: imx6q: drop of_platform_default_populate() from init_machine
arm64: dts: rockchip: Update RK3399 PCI host bridge window to 32-bit address memory
soc/tegra: fuse: Fix Tegra234-only builds
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock fix from Mike Rapoport:
"This is a fix for the rework of ARM's pfn_valid() implementation
merged during this merge window.
Don't abuse pfn_valid() to check if pfn is in RAM
The semantics of pfn_valid() is to check presence of the memory map
for a PFN and not whether a PFN is in RAM. The memory map may be
present for a hole in the physical memory and if such hole corresponds
to an MMIO range, __arm_ioremap_pfn_caller() will produce a WARN() and
fail.
Use memblock_is_map_memory() instead of pfn_valid() to check if a PFN
is in RAM or not"
* tag 'fixes-2021-07-09' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
arm: ioremap: don't abuse pfn_valid() to check if pfn is in RAM
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu
Pull percpu fix from Dennis Zhou:
"This is just a single change to fix percpu depopulation. The code
relied on depopulation code written specifically for the free path and
relied on vmalloc to do the tlb flush lazily. As we're modifying the
backing pages during the lifetime of a chunk, we need to also flush
the tlb accordingly.
Guenter Roeck reported this issue in [1] on mips. I believe we just
happen to be lucky given the much larger chunk sizes on x86 and
consequently less churning of this memory"
Link: https://lore.kernel.org/lkml/20210702191140.GA3166599@roeck-us.net/ [1]
* 'for-5.14-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu:
percpu: flush tlb in pcpu_reclaim_populated()
|
|
Mat Martineau says:
====================
mptcp: Connection and accounting fixes
Here are some miscellaneous fixes for MPTCP:
Patch 1 modifies an MPTCP hash so it doesn't depend on one of skb->dev
and skb->sk being non-NULL.
Patch 2 removes an extra destructor call when rejecting a join due to
port mismatch.
Patches 3 and 5 more cleanly handle error conditions with MP_JOIN and
syncookies, and update a related self test.
Patch 4 makes sure packets that trigger a subflow TCP reset during MPTCP
option header processing are correctly dropped.
Patch 6 addresses a rmem accounting issue that could keep packets in
subflow receive buffers longer than necessary, delaying MPTCP-level
ACKs.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After commit 879526030c8b ("mptcp: protect the rx path with
the msk socket spinlock") the rmem currently used by a given
msk is really sk_rmem_alloc - rmem_released.
The safety check in mptcp_data_ready() does not take the above
in due account, as a result legit incoming data is kept in
subflow receive queue with no reason, delaying or blocking
MPTCP-level ack generation.
This change addresses the issue introducing a new helper to fetch
the rmem memory and using it as needed. Additionally add a MIB
counter for the exceptional event described above - the peer is
misbehaving.
Finally, introduce the required annotation when rmem_released is
updated.
Fixes: 879526030c8b ("mptcp: protect the rx path with the msk socket spinlock")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/211
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After patch "mptcp: fix syncookie process if mptcp can not_accept new
subflow", if subflow is limited, MP_JOIN SYN is dropped, and no SYN/ACK
will be replied.
So in case "multiple subflows limited by server", the expected SYN/ACK
number should be 1.
Fixes: 00587187ad30 ("selftests: mptcp: add test cases for mptcp join tests with syn cookies")
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If check_fully_established() causes a subflow reset, it should not
continue to process the packet in tcp_data_queue().
Add a return value to mptcp_incoming_options(), and return false if a
subflow has been reset, else return true. Then drop the packet in
tcp_data_queue()/tcp_rcv_state_process() if mptcp_incoming_options()
return false.
Fixes: d582484726c4 ("mptcp: fix fallback for MP_JOIN subflows")
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Lots of "TCP: tcp_fin: Impossible, sk->sk_state=7" in client side
when doing stress testing using wrk and webfsd.
There are at least two cases may trigger this warning:
1.mptcp is in syncookie, and server recv MP_JOIN SYN request,
in subflow_check_req(), the mptcp_can_accept_new_subflow()
return false, so subflow_init_req_cookie_join_save() isn't
called, i.e. not store the data present in the MP_JOIN syn
request and the random nonce in hash table - join_entries[],
but still send synack. When recv 3rd-ack,
mptcp_token_join_cookie_init_state() will return false, and
3rd-ack is dropped, then if mptcp conn is closed by client,
client will send a DATA_FIN and a MPTCP FIN, the DATA_FIN
doesn't have MP_CAPABLE or MP_JOIN,
so mptcp_subflow_init_cookie_req() will return 0, and pass
the cookie check, MP_JOIN request is fallback to normal TCP.
Server will send a TCP FIN if closed, in client side,
when process TCP FIN, it will do reset, the code path is:
tcp_data_queue()->mptcp_incoming_options()
->check_fully_established()->mptcp_subflow_reset().
mptcp_subflow_reset() will set sock state to TCP_CLOSE,
so tcp_fin will hit TCP_CLOSE, and print the warning.
2.mptcp is in syncookie, and server recv 3rd-ack, in
mptcp_subflow_init_cookie_req(), mptcp_can_accept_new_subflow()
return false, and subflow_req->mp_join is not set to 1,
so in subflow_syn_recv_sock() will not reset the MP_JOIN
subflow, but fallback to normal TCP, and then the same thing
happens when server will send a TCP FIN if closed.
For case1, subflow_check_req() return -EPERM,
then tcp_conn_request() will drop MP_JOIN SYN.
For case2, let subflow_syn_recv_sock() call
mptcp_can_accept_new_subflow(), and do fatal fallback, send reset.
Fixes: 9466a1ccebbe ("mptcp: enable JOIN requests even if cookies are in use")
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In subflow_check_req(), if subflow sport is mismatch, will put msk,
destroy token, and destruct req, then return -EPERM, which can be
done by subflow_req_destructor() via:
tcp_conn_request()
|--__reqsk_free()
|--subflow_req_destructor()
So we should remove these redundant code, otherwise will call
tcp_v4_reqsk_destructor() twice, and may double free
inet_rsk(req)->ireq_opt.
Fixes: 5bc56388c74f ("mptcp: add port number check for MP_JOIN")
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
I did stress test with wrk[1] and webfsd[2] with the assistance of
mptcp-tools[3]:
Server side:
./use_mptcp.sh webfsd -4 -R /tmp/ -p 8099
Client side:
./use_mptcp.sh wrk -c 200 -d 30 -t 4 http://192.168.174.129:8099/
and got the following warning message:
[ 55.552626] TCP: request_sock_subflow: Possible SYN flooding on port 8099. Sending cookies. Check SNMP counters.
[ 55.553024] ------------[ cut here ]------------
[ 55.553027] WARNING: CPU: 0 PID: 10 at net/core/flow_dissector.c:984 __skb_flow_dissect+0x280/0x1650
...
[ 55.553117] CPU: 0 PID: 10 Comm: ksoftirqd/0 Not tainted 5.12.0+ #18
[ 55.553121] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 02/27/2020
[ 55.553124] RIP: 0010:__skb_flow_dissect+0x280/0x1650
...
[ 55.553133] RSP: 0018:ffffb79580087770 EFLAGS: 00010246
[ 55.553137] RAX: 0000000000000000 RBX: ffffffff8ddb58e0 RCX: ffffb79580087888
[ 55.553139] RDX: ffffffff8ddb58e0 RSI: ffff8f7e4652b600 RDI: 0000000000000000
[ 55.553141] RBP: ffffb79580087858 R08: 0000000000000000 R09: 0000000000000008
[ 55.553143] R10: 000000008c622965 R11: 00000000d3313a5b R12: ffff8f7e4652b600
[ 55.553146] R13: ffff8f7e465c9062 R14: 0000000000000000 R15: ffffb79580087888
[ 55.553149] FS: 0000000000000000(0000) GS:ffff8f7f75e00000(0000) knlGS:0000000000000000
[ 55.553152] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 55.553154] CR2: 00007f73d1d19000 CR3: 0000000135e10004 CR4: 00000000003706f0
[ 55.553160] Call Trace:
[ 55.553166] ? __sha256_final+0x67/0xd0
[ 55.553173] ? sha256+0x7e/0xa0
[ 55.553177] __skb_get_hash+0x57/0x210
[ 55.553182] subflow_init_req_cookie_join_save+0xac/0xc0
[ 55.553189] subflow_check_req+0x474/0x550
[ 55.553195] ? ip_route_output_key_hash+0x67/0x90
[ 55.553200] ? xfrm_lookup_route+0x1d/0xa0
[ 55.553207] subflow_v4_route_req+0x8e/0xd0
[ 55.553212] tcp_conn_request+0x31e/0xab0
[ 55.553218] ? selinux_socket_sock_rcv_skb+0x116/0x210
[ 55.553224] ? tcp_rcv_state_process+0x179/0x6d0
[ 55.553229] tcp_rcv_state_process+0x179/0x6d0
[ 55.553235] tcp_v4_do_rcv+0xaf/0x220
[ 55.553239] tcp_v4_rcv+0xce4/0xd80
[ 55.553243] ? ip_route_input_rcu+0x246/0x260
[ 55.553248] ip_protocol_deliver_rcu+0x35/0x1b0
[ 55.553253] ip_local_deliver_finish+0x44/0x50
[ 55.553258] ip_local_deliver+0x6c/0x110
[ 55.553262] ? ip_rcv_finish_core.isra.19+0x5a/0x400
[ 55.553267] ip_rcv+0xd1/0xe0
...
After debugging, I found in __skb_flow_dissect(), skb->dev and skb->sk
are both NULL, then net is NULL, and trigger WARN_ON_ONCE(!net),
actually net is always NULL in this code path, as skb->dev is set to
NULL in tcp_v4_rcv(), and skb->sk is never set.
Code snippet in __skb_flow_dissect() that trigger warning:
975 if (skb) {
976 if (!net) {
977 if (skb->dev)
978 net = dev_net(skb->dev);
979 else if (skb->sk)
980 net = sock_net(skb->sk);
981 }
982 }
983
984 WARN_ON_ONCE(!net);
So, using seq and transport header derived hash.
[1] https://github.com/wg/wrk
[2] https://github.com/ourway/webfsd
[3] https://github.com/pabeni/mptcp-tools
Fixes: 9466a1ccebbe ("mptcp: enable JOIN requests even if cookies are in use")
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Suggested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
commit 03623b4b041c ("rtc: pcf2127: add tamper detection support")
added support for timestamp interrupts. However they are not being
handled in the irq handler. If a timestamp interrupt occurs it
results in kernel disabling the interrupt and displaying the call
trace:
[ 121.145580] irq 78: nobody cared (try booting with the "irqpoll" option)
...
[ 121.238087] [<00000000c4d69393>] irq_default_primary_handler threaded [<000000000a90d25b>] pcf2127_rtc_irq [rtc_pcf2127]
[ 121.248971] Disabling IRQ #78
Handle timestamp interrupts in pcf2127_rtc_irq(). Save time stamp
before clearing TSF1 and TSF2 flags so that it can't be overwritten.
Set a flag to mark if the timestamp is valid and only report to sysfs
if the flag is set. To mimic the hardware behavior, don’t save
another timestamp until the first one has been read by the userspace.
However, if the alarm irq is not configured, keep the old way of
handling timestamp interrupt in the timestamp0 sysfs calls.
Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Reviewed-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Tested-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210629150643.31551-1-ykaukab@suse.de
|
|
The offset variable is checked by at91_rtc_readalarm(), but this check
is unnecessary because the previous check knew that the value of this
variable was not 0.
This removes that unnecessary offset variable checks.
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210708051340.341345-1-nobuhiro1.iwamatsu@toshiba.co.jp
|
|
s5m_check_peding_alarm_interrupt() in s5m_rtc_read_alarm() gets the return
value, but doesn't use it.
This modifies using the s5m_check_peding_alarm_interrupt()"s return value
as the s5m_rtc_read_alarm()'s return value.
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: linux-samsung-soc@vger.kernel.org
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210708051304.341278-1-nobuhiro1.iwamatsu@toshiba.co.jp
|
|
Use SPDX-License-Identifier instead of a verbose license text.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210707075804.337458-11-nobuhiro1.iwamatsu@toshiba.co.jp
|
|
Use SPDX-License-Identifier instead of a verbose license text.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210707075804.337458-9-nobuhiro1.iwamatsu@toshiba.co.jp
|
|
Use SPDX-License-Identifier instead of a verbose license text.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210707075804.337458-8-nobuhiro1.iwamatsu@toshiba.co.jp
|
|
For C files, use the C99 format (//).
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210707075804.337458-7-nobuhiro1.iwamatsu@toshiba.co.jp
|
|
For C files, use the C99 format (//).
Cc: Orson Zhai <orsonzhai@gmail.com>
Cc: Baolin Wang <baolin.wang7@gmail.com>
Cc: Chunyan Zhang <zhang.lyra@gmail.com>
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210707075804.337458-6-nobuhiro1.iwamatsu@toshiba.co.jp
|
|
Use SPDX-License-Identifier instead of a verbose license text.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210707075804.337458-5-nobuhiro1.iwamatsu@toshiba.co.jp
|
|
Use SPDX-License-Identifier instead of a verbose license text.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210707075804.337458-4-nobuhiro1.iwamatsu@toshiba.co.jp
|
|
Use SPDX-License-Identifier instead of a verbose license text.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210707075804.337458-3-nobuhiro1.iwamatsu@toshiba.co.jp
|
|
Use SPDX-License-Identifier instead of a verbose license text.
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210707075804.337458-2-nobuhiro1.iwamatsu@toshiba.co.jp
|
|
This reverts commit 65db04053efea3f3e412a7e0cc599962999c96b4.
Guenter reported that after 65db04053efe, the ppc:sam460ex qemu emulation
no longer boots from nvme:
nvme nvme0: Device not ready; aborting initialisation, CSTS=0x0
nvme nvme0: Removing after probe failure status: -19
Link: https://lore.kernel.org/r/20210709231529.GA3270116@roeck-us.net
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
After updating the datasheet URL, the PCF85063A datasheet revision
has changed.
Adjust it accordingly.
Reported-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210624120953.2313378-1-festevam@gmail.com
|
|
Take maintainership of the binding as PAvel said he doesn't have the
hardware anymore.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Link: https://lore.kernel.org/r/20210620224030.1115356-1-alexandre.belloni@bootlin.com
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2021-07-09
The following pull-request contains BPF updates for your *net* tree.
We've added 9 non-merge commits during the last 9 day(s) which contain
a total of 13 files changed, 118 insertions(+), 62 deletions(-).
The main changes are:
1) Fix runqslower task->state access from BPF, from SanjayKumar Jeyakumar.
2) Fix subprog poke descriptor tracking use-after-free, from John Fastabend.
3) Fix sparse complaint from prior devmap RCU conversion, from Toke Høiland-Jørgensen.
4) Fix missing va_end in bpftool JIT json dump's error path, from Gu Shengxian.
5) Fix tools/bpf install target from missing runqslower install, from Wei Li.
6) Fix xdpsock BPF sample to unload program on shared umem option, from Wang Hai.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
skb_tunnel_info() returns pointer of lwtstate->data as ip_tunnel_info
type without validation. lwtstate->data can have various types such as
mpls_iptunnel_encap, etc and these are not compatible.
So skb_tunnel_info() should validate before returning that pointer.
Splat looks like:
BUG: KASAN: slab-out-of-bounds in vxlan_get_route+0x418/0x4b0 [vxlan]
Read of size 2 at addr ffff888106ec2698 by task ping/811
CPU: 1 PID: 811 Comm: ping Not tainted 5.13.0+ #1195
Call Trace:
dump_stack_lvl+0x56/0x7b
print_address_description.constprop.8.cold.13+0x13/0x2ee
? vxlan_get_route+0x418/0x4b0 [vxlan]
? vxlan_get_route+0x418/0x4b0 [vxlan]
kasan_report.cold.14+0x83/0xdf
? vxlan_get_route+0x418/0x4b0 [vxlan]
vxlan_get_route+0x418/0x4b0 [vxlan]
[ ... ]
vxlan_xmit_one+0x148b/0x32b0 [vxlan]
[ ... ]
vxlan_xmit+0x25c5/0x4780 [vxlan]
[ ... ]
dev_hard_start_xmit+0x1ae/0x6e0
__dev_queue_xmit+0x1f39/0x31a0
[ ... ]
neigh_xmit+0x2f9/0x940
mpls_xmit+0x911/0x1600 [mpls_iptunnel]
lwtunnel_xmit+0x18f/0x450
ip_finish_output2+0x867/0x2040
[ ... ]
Fixes: 61adedf3e3f1 ("route: move lwtunnel state to dst_entry")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 28e104d00281 ("net: ip_tunnel: fix mtu calculation") removed
dev->hard_header_len subtraction when calculate MTU for tunnel devices
as there is an overhead for device that has header_ops.
But there are ETHER tunnel devices, like gre_tap or erspan, which don't
have header_ops but set dev->hard_header_len during setup. This makes
pkts greater than (MTU - ETH_HLEN) could not be xmited. Fix it by
subtracting the ETHER tunnel devices' dev->hard_header_len for MTU
calculation.
Fixes: 28e104d00281 ("net: ip_tunnel: fix mtu calculation")
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull io_uring fixes from Jens Axboe:
"A few fixes that should go into this merge.
One fixes a regression introduced in this release, others are just
generic fixes, mostly related to handling fallback task_work"
* tag 'io_uring-5.14-2021-07-09' of git://git.kernel.dk/linux-block:
io_uring: remove dead non-zero 'poll' check
io_uring: mitigate unlikely iopoll lag
io_uring: fix drain alloc fail return code
io_uring: fix exiting io_req_task_work_add leaks
io_uring: simplify task_work func
io_uring: fix stuck fallback reqs
|
|
Pull more block updates from Jens Axboe:
"A combination of changes that ended up depending on both the driver
and core branch (and/or the IDE removal), and a few late arriving
fixes. In detail:
- Fix io ticks wrap-around issue (Chunguang)
- nvme-tcp sock locking fix (Maurizio)
- s390-dasd fixes (Kees, Christoph)
- blk_execute_rq polling support (Keith)
- blk-cgroup RCU iteration fix (Yu)
- nbd backend ID addition (Prasanna)
- Partition deletion fix (Yufen)
- Use blk_mq_alloc_disk for mmc, mtip32xx, ubd (Christoph)
- Removal of now dead block request types due to IDE removal
(Christoph)
- Loop probing and control device cleanups (Christoph)
- Device uevent fix (Christoph)
- Misc cleanups/fixes (Tetsuo, Christoph)"
* tag 'block-5.14-2021-07-08' of git://git.kernel.dk/linux-block: (34 commits)
blk-cgroup: prevent rcu_sched detected stalls warnings while iterating blkgs
block: fix the problem of io_ticks becoming smaller
nvme-tcp: can't set sk_user_data without write_lock
loop: remove unused variable in loop_set_status()
block: remove the bdgrab in blk_drop_partitions
block: grab a device refcount in disk_uevent
s390/dasd: Avoid field over-reading memcpy()
dasd: unexport dasd_set_target_state
block: check disk exist before trying to add partition
ubd: remove dead code in ubd_setup_common
nvme: use return value from blk_execute_rq()
block: return errors from blk_execute_rq()
nvme: use blk_execute_rq() for passthrough commands
block: support polling through blk_execute_rq
block: remove REQ_OP_SCSI_{IN,OUT}
block: mark blk_mq_init_queue_data static
loop: rewrite loop_exit using idr_for_each_entry
loop: split loop_lookup
loop: don't allow deleting an unspecified loop device
loop: move loop_ctl_mutex locking into loop_add
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Just a collection of small fixes here: the most outstanding one is the
re-application of USB-audio lowlatency support that was reverted in
the previous PR. The rest are device-specific quirks/fixes, spelling
fixes and a regression fix for the old intel8x0 driver"
* tag 'sound-fix-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: intel8x0: Fix breakage at ac97 clock measurement
ALSA: usb-audio: Reduce latency at playback start, take#2
ALSA: isa: Fix error return code in snd_cmi8330_probe()
ALSA: emux: fix spelling mistakes
ALSA: usb-audio: fix spelling mistakes
ALSA: bebob: correct duplicated entries with TerraTec OUI
ALSA: usx2y: fix spelling mistakes
ALSA: x86: fix spelling mistakes
ALSA: hda/realtek: fix mute led of the HP Pavilion 15-eh1xxx series
|
|
ASan reported a memory leak for items of the entlist returned from scandir().
In fact, scandir() returns a malloc'd array of malloc'd dirents.
This patch adds the missing (z)frees.
Fixes: da963834fe6975a1 ("perf test: Iterate over shell tests in alphabetical order")
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Fabian Hemmer <copy@copy.sh>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Remi Bernon <rbernon@codeweavers.com>
Link: http://lore.kernel.org/lkml/20210709163454.672082-1-rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add a test for the newly added perf_evlist__set_leader() function.
Committer testing:
$ cd tools/lib/perf/
$ sudo make tests
[sudo] password for acme:
running static:
- running tests/test-cpumap.c...OK
- running tests/test-threadmap.c...OK
- running tests/test-evlist.c...OK
- running tests/test-evsel.c...OK
running dynamic:
- running tests/test-cpumap.c...OK
- running tests/test-threadmap.c...OK
- running tests/test-evlist.c...OK
- running tests/test-evsel.c...OK
$
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Requested-by: Shunsuke Nakamura <nakamura.shun@fujitsu.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210706151704.73662-8-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
We shouldn't just panic, return a value that doesn't clash with what
perf_evsel__open() was already returning in case of error, i.e. errno
when sys_perf_event_open() fails.
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shunsuke Nakamura <nakamura.shun@fujitsu.com>
Link: http://lore.kernel.org/lkml/YOiOA5zOtVH9IBbE@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Some socket buffers allocated in the fclone cache (in __alloc_skb) can
end-up in the following path[1]:
napi_skb_finish
__kfree_skb_defer
napi_skb_cache_put
The issue is napi_skb_cache_put is not fclone friendly and will put
those skbuff in the skb cache to be reused later, although this cache
only expects skbuff allocated from skbuff_head_cache. When this happens
the skbuff is eventually freed using the wrong origin cache, and we can
see traces similar to:
[ 1223.947534] cache_from_obj: Wrong slab cache. skbuff_head_cache but object is from skbuff_fclone_cache
[ 1223.948895] WARNING: CPU: 3 PID: 0 at mm/slab.h:442 kmem_cache_free+0x251/0x3e0
[ 1223.950211] Modules linked in:
[ 1223.950680] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 5.13.0+ #474
[ 1223.951587] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-3.fc34 04/01/2014
[ 1223.953060] RIP: 0010:kmem_cache_free+0x251/0x3e0
Leading sometimes to other memory related issues.
Fix this by using __kfree_skb for fclone skbuff, similar to what is done
the other place __kfree_skb_defer is called.
[1] At least in setups using veth pairs and tunnels. Building a kernel
with KASAN we can for example see packets allocated in
sk_stream_alloc_skb hit the above path and later the issue arises
when the skbuff is reused.
Fixes: 9243adfc311a ("skbuff: queue NAPI_MERGED_FREE skbs into NAPI cache instead of freeing")
Cc: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
sk_wmem_schedule makes sure that sk_forward_alloc has enough
bytes for charging that is going to be done by sk_mem_charge.
In the transmit zerocopy path, there is sk_mem_charge but there was
no call to sk_wmem_schedule. This change adds that call.
Without this call to sk_wmem_schedule, sk_forward_alloc can go
negetive which is a bug because sk_forward_alloc is a per-socket
space that has been forward charged so this can't be negative.
Fixes: f214f915e7db ("tcp: enable MSG_ZEROCOPY")
Signed-off-by: Talal Ahmad <talalahmad@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Wei Wang <weiwan@google.com>
Reviewed-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
commit e05a90ec9e16 ("net: reflect mark on tcp syn ack packets")
fixed IPv4 only.
This part is for the IPv6 side.
Fixes: e05a90ec9e16 ("net: reflect mark on tcp syn ack packets")
Signed-off-by: Alexander Ovechkin <ovov@yandex-team.ru>
Acked-by: Dmitry Yakunin <zeil@yandex-team.ru>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fix and cleanup from Steven Rostedt:
"Tracing fix for histograms and a clean up in ftrace:
- Fixed a bug that broke the .sym-offset modifier and added a test to
make sure nothing breaks it again.
- Replace a list_del/list_add() with a list_move()"
* tag 'trace-v5.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace: Use list_move instead of list_del/list_add
tracing/selftests: Add tests to test histogram sym and sym-offset modifiers
tracing/histograms: Fix parsing of "sym-offset" modifier
|
|
Pull virtio,vhost,vdpa updates from Michael Tsirkin:
- Doorbell remapping for ifcvf, mlx5
- virtio_vdpa support for mlx5
- Validate device input in several drivers (for SEV and friends)
- ZONE_MOVABLE aware handling in virtio-mem
- Misc fixes, cleanups
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (48 commits)
virtio-mem: prioritize unplug from ZONE_MOVABLE in Big Block Mode
virtio-mem: simplify high-level unplug handling in Big Block Mode
virtio-mem: prioritize unplug from ZONE_MOVABLE in Sub Block Mode
virtio-mem: simplify high-level unplug handling in Sub Block Mode
virtio-mem: simplify high-level plug handling in Sub Block Mode
virtio-mem: use page_zonenum() in virtio_mem_fake_offline()
virtio-mem: don't read big block size in Sub Block Mode
virtio/vdpa: clear the virtqueue state during probe
vp_vdpa: allow set vq state to initial state after reset
virtio-pci library: introduce vp_modern_get_driver_features()
vdpa: support packed virtqueue for set/get_vq_state()
virtio-ring: store DMA metadata in desc_extra for split virtqueue
virtio: use err label in __vring_new_virtqueue()
virtio_ring: introduce virtqueue_desc_add_split()
virtio_ring: secure handling of mapping errors
virtio-ring: factor out desc_extra allocation
virtio_ring: rename vring_desc_extra_packed
virtio-ring: maintain next in extra state for packed virtqueue
vdpa/mlx5: Clear vq ready indication upon device reset
vdpa/mlx5: Add support for doorbell bypassing
...
|
|
To 2.33
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
priv is netdev private data and it cannot be
used after free_netdev() call. Using priv after free_netdev()
can cause UAF bug. Fix it by moving free_netdev() at the end of the
function.
Fixes: 1e0a8b13d355 ("tlan: cancel work at remove path")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
adpt is netdev private data and it cannot be
used after free_netdev() call. Using adpt after free_netdev()
can cause UAF bug. Fix it by moving free_netdev() at the end of the
function.
Fixes: 54e19bc74f33 ("net: qcom/emac: do not use devm on internal phy pdev")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In case of netdev registration failure the code path will
jump to init_fail label:
init_fail:
netdev_err(ndev, "init failed\n");
moxart_mac_free_memory(ndev);
irq_map_fail:
free_netdev(ndev);
return ret;
So, there is no need to call free_netdev() before jumping
to error handling path, since it can cause UAF or double-free
bug.
Fixes: 6c821bd9edc9 ("net: Add MOXA ART SoCs ethernet driver")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
- Regression fix in drbg due to missing self-test for new default
algorithm
- Add ratelimit on user-triggerable message in qat
- Fix build failure due to missing dependency in sl3516
- Remove obsolete PageSlab checks
- Fix bogus hardware register writes on Kunpeng920 in hisilicon/sec
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: hisilicon/sec - fix the process of disabling sva prefetching
crypto: sl3516 - Add dependency on ARCH_GEMINI
crypto: sl3516 - Typo s/Stormlink/Storlink/
crypto: drbg - self test for HMAC(SHA-512)
crypto: omap - Drop obsolete PageSlab check
crypto: scatterwalk - Remove obsolete PageSlab check
crypto: qat - ratelimit invalid ioctl message and print the invalid cmd
|
|
The optional @ref parameter might contain an NULL node_name, so
prevent dereferencing it in cifs_compose_mount_options().
Addresses-Coverity: 1476408 ("Explicit null dereferenced")
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Add support to set group_fd in perf_evsel__open() and make it follow the
group setup.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Requested-by: Shunsuke Nakamura <nakamura.shun@fujitsu.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210706151704.73662-7-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Support for faster packet signing (using GMAC instead of CMAC) can
now be negotiated to some newer servers, including Windows.
See MS-SMB2 section 2.2.3.17.
This patch adds support for sending the new negotiate context
with the first of three supported signing algorithms (AES-CMAC)
and decoding the response. A followon patch will add support
for sending the other two (including AES-GMAC, which is fastest)
and changing the signing algorithm used based on what was
negotiated.
To allow the client to request GMAC signing set module parameter
"enable_negotiate_signing" to 1.
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilovsky@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Merging in the last batch of fixes that didn't go in before previous
release, just a few smaller DT fixups and a MAINTAINERS update
* arm/fixes: (29 commits)
MAINTAINERS: Add myself as TEE subsystem reviewer
ARM: dts: ux500: Fix LED probing
arm64: dts: rockchip: Update RK3399 PCI host bridge window to 32-bit address memory
arm64: dts: allwinner: a64-sopine-baseboard: change RGMII mode to TXID
arm64: meson: select COMMON_CLK
soc: amlogic: meson-clk-measure: remove redundant dev_err call in meson_msr_probe()
ARM: dts: qcom: sdx55-telit: Represent secure-regions as 64-bit elements
ARM: dts: qcom: sdx55-t55: Represent secure-regions as 64-bit elements
ARM: dts: sun8i: h3: orangepi-plus: Fix ethernet phy-mode
ARM: dts: imx: emcon-avari: Fix nxp,pca8574 #gpio-cells
ARM: dts: imx7d-pico: Fix the 'tuning-step' property
ARM: dts: imx7d-meerkat96: Fix the 'tuning-step' property
arm64: dts: freescale: sl28: var1: fix RGMII clock and voltage
arm64: dts: freescale: sl28: var4: fix RGMII clock and voltage
ARM: imx: pm-imx27: Include "common.h"
arm64: dts: zii-ultra: fix 12V_MAIN voltage
arm64: dts: zii-ultra: remove second GEN_3V3 regulator instance
arm64: dts: ls1028a: fix memory node
optee: use export_uuid() to copy client UUID
arm64: dts: ti: k3*: Introduce reg definition for interrupt routers
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
"We have a handful of new features for 5.14:
- Support for transparent huge pages.
- Support for generic PCI resources mapping.
- Support for the mem= kernel parameter.
- Support for KFENCE.
- A handful of fixes to avoid W+X mappings in the kernel.
- Support for VMAP_STACK based overflow detection.
- An optimized copy_{to,from}_user"
* tag 'riscv-for-linus-5.14-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (37 commits)
riscv: xip: Fix duplicate included asm/pgtable.h
riscv: Fix PTDUMP output now BPF region moved back to module region
riscv: __asm_copy_to-from_user: Optimize unaligned memory access and pipeline stall
riscv: add VMAP_STACK overflow detection
riscv: ptrace: add argn syntax
riscv: mm: fix build errors caused by mk_pmd()
riscv: Introduce structure that group all variables regarding kernel mapping
riscv: Map the kernel with correct permissions the first time
riscv: Introduce set_kernel_memory helper
riscv: Enable KFENCE for riscv64
RISC-V: Use asm-generic for {in,out}{bwlq}
riscv: add ASID-based tlbflushing methods
riscv: pass the mm_struct to __sbi_tlb_flush_range
riscv: Add mem kernel parameter support
riscv: Simplify xip and !xip kernel address conversion macros
riscv: Remove CONFIG_PHYS_RAM_BASE_FIXED
riscv: Only initialize swiotlb when necessary
riscv: fix typo in init.c
riscv: Cleanup unused functions
riscv: mm: Use better bitmap_zalloc()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Fix crashes on 64-bit Book3E due to use of Book3S only mtmsrd
instruction.
Fix "scheduling while atomic" warnings at boot due to preempt count
underflow.
Two commits fixing our handling of BPF atomic instructions.
Fix error handling in xive when allocating an IPI.
Fix lockup on kernel exec fault on 603.
Thanks to Bharata B Rao, Cédric Le Goater, Christian Zigotzky,
Christophe Leroy, Guenter Roeck, Jiri Olsa, Naveen N. Rao, Nicholas
Piggin, and Valentin Schneider"
* tag 'powerpc-5.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/preempt: Don't touch the idle task's preempt_count during hotplug
powerpc/64e: Fix system call illegal mtmsrd instruction
powerpc/xive: Fix error handling when allocating an IPI
powerpc/bpf: Reject atomic ops in ppc32 JIT
powerpc/bpf: Fix detecting BPF atomic instructions
powerpc/mm: Fix lockup on kernel exec fault
|
