summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2013-02-22[SCSI] mvsas: fixed timeout issue when removing moduleXiangliang Yu2-2/+9
Root cause is libsas will clear asd_sas_port phy_mask value in sas_port_deform after triggering destruct workqueue, but the workqueue will send sync cmd and still need phy_mask value. Now, mvsas using asd_sas_phy setting instead of asd_sas_port setting. Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] aacraid: 1024 max outstanding command support for Series 7 and aboveMahesh Rajashekhara2-3/+16
Signed-off-by: Mahesh Rajashekhara <Mahesh_Rajashekhara@pmc-sierra.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] bnx2fc: adjust duplicate testJulia Lawall1-1/+1
Delete successive tests to the same location. The code tested the result of a previous allocation, that itself was already tested. It is changed to test the result of the most recent allocation. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @s exists@ local idexpression y; expression x,e; @@ *if ( \(x == NULL\|IS_ERR(x)\|y != 0\) ) { ... when forall return ...; } ... when != \(y = e\|y += e\|y -= e\|y |= e\|y &= e\|y++\|y--\|&y\) when != \(XT_GETPAGE(...,y)\|WMI_CMD_BUF(...)\) *if ( \(x == NULL\|IS_ERR(x)\|y != 0\) ) { ... when forall return ...; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] qla4xxx: Update driver version to 5.03.00-k4Vikas Chaudhary1-1/+1
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] qla4xxx: Fix return code for qla4xxx_session_get_param.Manish Rangankar1-6/+6
While reading sysfs chap_in_idx and chap_out_idx attribute, if chap authentication is not set we get an error as "Invalid argument". Signed-off-by: Manish Rangankar <manish.rangankar@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] qla4xxx: wait for boot target login response during probe.Manish Rangankar2-4/+84
Boot from SAN fails in some cases where boot target login response is slow. In this case, probe finishes early and triggers init, which doesn't find remote disk to mount root which leads to BFS failure. Signed-off-by: Manish Rangankar <manish.rangankar@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] qla4xxx: Added support for force firmware dumpVikas Chaudhary3-6/+13
This patch force driver to collect firmware dump using following command:- "echo 2 > /sys/class/scsi_host/hostX/device/fw_dump" Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] qla4xxx: Re-register IRQ handler while retrying initialize of adapterPoornima Vonti2-24/+5
Problem: If initialization of adapter fails for some reason, then the interrupt handlers are released. The interrupt handlers are not registered again when initialization of adapter is retried. Solution: Re-register the interrupt handler when adapter initialization is retried. Signed-off-by: Poornima Vonti <poornima.vonti@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] qla4xxx: Throttle active IOCBs to firmware limitsKaren Higgins3-3/+21
Problem: QLA4xxx firmware may assert if given more IOCBs than it can handle. Solution: The driver was updated to throttle the number of active IOCBs based on the total number of IOCB buffers received from get_firmware_status mbx_sts[2]. Signed-off-by: Karen Higgins <karen.higgins@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] qla4xxx: Remove unnecessary code from qla4xxx_init_local_dataKaren Higgins1-5/+2
Removed unnecessary calls to qla4xxx_get_firmware_status from function qla4xxx_init_local_data Signed-off-by: Karen Higgins <karen.higgins@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] qla4xxx: Quiesce driver activities while loopbackNilesh Javali4-3/+45
Quiesce all different activities performed by driver upon the link events while loopback diagnostics is in progress. Signed-off-by: Nilesh Javali <nilesh.javali@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] qla4xxx: Rename MBOX_ASTS_IDC_NOTIFY to ↵Nilesh Javali2-2/+2
MBOX_ASTS_IDC_REQUEST_NOTIFICATION Signed-off-by: Nilesh Javali <nilesh.javali@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] qla4xxx: Add spurious interrupt messages under debug level 2Nilesh Javali1-6/+7
The spurious interrupt messages are seen when interrupt lines are shared between different adapters or modules. Example, interrupt lines are shared between qlcnic and qla4xxx and USB modules, then the console is flooded with flurry of spurious interrupt messages which are expected in such scenario. Hence put these messages under debug level 2 for INTx interrupt mode. Signed-off-by: Nilesh Javali <nilesh.javali@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] cxgb4i: Remove the scsi host device when removing deviceThadeu Lima de Souza Cascardo1-0/+1
When doing a hotplug remove of a cxgb4 device, there are still dandling symlinks at /sys/class/scsi_host/hostX to the removed PCI device. The upper layer device may also try to send data, which may crash the system. The DETACH message from the lower level driver is sent to the ULD when the device is removed, when the scsi host should be removed from the system, avoiding any problems. After this patch, there are no more dangling symlinks and many attempts to crash the system while there is SCSI activity and removing the device have failed. Adding the device back again works as expected, with the scsi hosts showing up again. Based on a patch by Karen Xie. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Cc: Karen Xie <kxie@chelsio.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] bfa: fix strncpy() limiter in bfad_start_ops()Dan Carpenter1-1/+1
The closing parenthesis is in the wrong place so it takes the sizeof a pointer instead of the sizeof the buffer minus one. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Anil Gurumurthy <agurumur@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] qla4xxx: Update driver version to 5.03.00-k3Vikas Chaudhary1-1/+1
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] qla4xxx: Correct the validation to check in get_sys_info mailboxNilesh Javali1-2/+2
Check mbox_sts[3] instead of mbox_sts[4] for ISP83xx to validate size of data returned Signed-off-by: Nilesh Javali <nilesh.javali@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] qla4xxx: Pass correct function param to qla4_8xxx_rd_directVikas Chaudhary1-1/+1
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] lpfc 8.3.37: Update lpfc version for 8.3.37 driver releaseJames Smart1-1/+1
Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] lpfc 8.3.37: Fixed infinite loop in lpfc_sli4_fcf_rr_next_index_get.James Smart1-3/+6
Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] lpfc 8.3.37: Fixed crash due to SLI Port invalid resource countJames Smart1-0/+28
Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] lpfc 8.3.37: Provide support for FCoE protocol dual-chute (ULP) operationJames Smart5-84/+369
Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] lpfc 8.3.37: Fixed stale ndlp state when the node is marked for ↵James Smart1-0/+10
deferred removal. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] lpfc 8.3.37: Fix potential memory corruption bugJames Smart1-1/+1
Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] lpfc 8.3.37: Fixed no-context ABTS failed with BA_RJTJames Smart5-83/+168
Fixed no-context ABTS received on unsolicited receive queue failed with BA_RJT Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] lpfc 8.3.37: Removed use of NOP mailboxes for interrupt verificationJames Smart1-153/+26
Removed use of NOP mailboxes for interrupt verification in pci_probe_one_s4 Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] lpfc 8.3.37: Fixed exhausted retry for plogi to nameserver.James Smart1-0/+7
Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] lpfc 8.3.37: Fixed ELS_REC received on the unsolicited receive queueJames Smart2-2/+18
Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] lpfc 8.3.37: Provide support for change_queue_typeJames Smart1-1/+23
Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] ipr: Fix sparse error in ipr driverwenxiong@linux.vnet.ibm.com1-52/+17
This patch fixes the following sparse error: CHECK drivers/scsi/ipr.c spinlock.h:147:9: warning: context imbalance in 'ipr_reset_reload' - unexpected unlock Signed-off-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] ipr: Driver version 2.6.0wenxiong@linux.vnet.ibm.com1-2/+2
Signed-off-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] ipr: Implement block iopollwenxiong@linux.vnet.ibm.com2-49/+178
This patch implements blk iopoll in ipr driver for performance improvement. Signed-off-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] ipr: Reduce lock contentionwenxiong@linux.vnet.ibm.com2-104/+240
This patch reduces lock contention while implementing distributed completion processing. Signed-off-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] ipr: Add support for MSI-X and distributed completionwenxiong@linux.vnet.ibm.com2-192/+594
The new generation IBM SAS Controllers will support MSI-X interrupts and Distributed Completion Processing features. This patch add these support in ipr device driver. Signed-off-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] ipr: Resource path error logging cleanupBrian King2-27/+56
The resource path as displayed by the ipr driver is the location string identifying a location on the SAS fabric. This patch adds the SCSI host number such that error logs can be more easily correlated in multiple adapter configurations. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] ipr: Handler ID memory allocation failure at module load timeBrian King1-0/+7
Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] ipr: Add sereral new CCIN definitions for new adapters supportwenxiong@linux.vnet.ibm.com2-0/+15
Add the appropriate definitions and table entries for new adapter support. Signed-off-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] csiostor: Don't leak mem or fail to release firmware in ↵Jesper Juhl1-6/+9
csio_hw_flash_config() If kzalloc() or csio_hw_check_fwconfig() fail we may leave the csio_hw_flash_config() function without freeing allocated memory or firmware. This should take care of the leaks. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Acked-by: Naresh Kumar Inna <naresh@chelsio.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] bnx2fc: Bumped version to 1.0.13Bhanu Prakash Gollapudi2-2/+2
Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] bnx2fc: Support max IO size to 512KBBhanu Prakash Gollapudi1-1/+1
Increase max_sectors from 512 to 1024 in order to support max IO size of 512KB. Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] bnx2fc: Tx/Rx byte counts reset to 0 when exceeding 32 bit valuesBhanu Prakash Gollapudi2-5/+34
Since the FW counters are 32-bit, accumulate the stats in the driver. [jejb: fix checkpatch warning] Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] bnx2fc: Map the doorbell register between offload and enable requestsBhanu Prakash Gollapudi3-28/+26
We used to map doorbell register after FW enable request is complete. This causes a race condition when unsolicited event is received, and FW sends a CQE for it. Since the doorbell is not mapped, driver does not arm CQ, which means FW will not notify the driver for further CQ completions. To resolve this, map the doorbell between offload and enable, so that driver is ready to receive the unsolicited packets and arm the CQ as soon as FW enable is performed. Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] bnx2fc: Move offload/upload wait logic into a functionBhanu Prakash Gollapudi1-35/+30
Moved the 'waiting for upload/offload completion' logic to respective functions as it is called in multiple places. Also this is done in preperation for the next patch. Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] bnx2fc: support software fcoe targetBhanu Prakash Gollapudi1-1/+3
Software FCoE target always advertises RETRY bit even when there are no tape LUNs behind the target. This causes the driver to enable FW support for sequence level error recovery and perform REC/SRR. This patch arrests the behavior by not enabling SLER feature for this target. Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-29[SCSI] bnx2fc: Remove potential NULL dereferenceJulia Lawall1-2/+4
If the NULL test is necessary, the initialization involving a dereference of the tested value should be moved after the NULL test. The sematic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ type T; expression E; identifier i,fld; statement S; @@ - T i = E->fld; + T i; ... when != E when != i if (E == NULL) S + i = E->fld; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-29[SCSI] bnx2fc: remove useless calls to memset().Cyril Roelandt1-4/+0
These calls are followed by calls to memcpy() on the same memory area, so they can be safely removed. Signed-off-by: Cyril Roelandt <tipecaml@gmail.com> Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-29[SCSI] mpt2sas: fix for driver fails EEH, recovery from injected pci bus errorSreekanth Reddy2-1/+19
This patch stops the driver to invoke kthread (which remove the dead ioc) for some time while EEH recovery has started. [thenzl: add a 'non_operational_loop' reset.] Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com> Signed-off-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-29[SCSI] mpt3sas: remove unused variablesWei Yongjun2-5/+1
The variable 'chain_flags' and 'phy_number' are initialized but never used otherwise, So remove those unused variables. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-29[SCSI] mpt3sas: Remove unneeded version.h header inclusionSachin Kamat5-5/+0
linux/version.h is not necessary as detected by checkversion.pl script. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: "Sreekanth Reddy" <Sreekanth.reddy@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-29[SCSI] bnx2i: fix the bit manipulation when setting the error maskTomas Henzl1-1/+1
The intention in bnx2i_send_fw_iscsi_init_msg was to zero out only the lower 32bits, but instead the whole mask64 is zeroed. This patch fixes it. Signed-off-by: Tomas Henzl <thenzl@redhat.com> Acked-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-07 08:51:07 +0000