| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some USB driver fixes fro 4.17-rc6.
They resolve some reported bugs in the musb driver, the xhci driver,
and a number of small fixes for the usbip driver.
All of these have been in linux-next with no reported issues"
* tag 'usb-4.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usbip: usbip_host: fix bad unlock balance during stub_probe()
usbip: usbip_host: fix NULL-ptr deref and use-after-free errors
usbip: usbip_host: run rebind from exit when module is removed
usbip: usbip_host: delete device from busid_table after rebind
usbip: usbip_host: refine probe and disconnect debug msgs to be useful
usb: musb: fix remote wakeup racing with suspend
xhci: Fix USB3 NULL pointer dereference at logical disconnect.
|
|
Pull block fix from Jens Axboe:
"Single fix this time, from Coly, fixing a failure case when
CONFIG_DEBUGFS isn't enabled"
* tag 'for-linus-20180518' of git://git.kernel.dk/linux-block:
bcache: return 0 from bch_debug_init() if CONFIG_DEBUG_FS=n
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A small collection of fixes accumilated since the merge window, all
fairly small and driver specific"
* tag 'spi-fix-v4.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: bcm2835aux: ensure interrupts are enabled for shared handler
spi: bcm-qspi: Always read and set BSPI_MAST_N_BOOT_CTRL
spi: bcm-qspi: Avoid setting MSPI_CDRAM_PCS for spi-nor master
spi: pxa2xx: Allow 64-bit DMA
spi: cadence: Add usleep_range() for cdns_spi_fill_tx_fifo()
spi: sh-msiof: Fix bit field overflow writes to TSCR/RSCR
spi: imx: Update MODULE_DESCRIPTION to "SPI Controller driver"
|
|
Pull mtd fixes from Boris Brezillon:
"NAND fixes:
- Fix read path of the Marvell NAND driver
- Make sure we don't pass a u64 to ndelay()
CFI fix:
- Fix the map_word_andequal() implementation"
* tag 'mtd/fixes-for-4.17-rc6' of git://git.infradead.org/linux-mtd:
mtd: rawnand: Fix return type of __DIVIDE() when called with 32-bit
mtd: rawnand: marvell: Fix read logic for layouts with ->nchunks > 2
mtd: Fix comparison in map_word_andequal()
|
|
git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Pretty quiet week again: one vmwgfx regression fix, one core buffer
overflow fix, one vc4 leak fix and three i915 fixes"
* tag 'drm-fixes-for-v4.17-rc6' of git://people.freedesktop.org/~airlied/linux:
drm/dumb-buffers: Integer overflow in drm_mode_create_ioctl()
drm/i915/gen9: Add WaClearHIZ_WM_CHICKEN3 for bxt and glk
drm/vmwgfx: Set dmabuf_size when vmw_dmabuf_init is successful
drm/vc4: Fix leak of the file_priv that stored the perfmon.
drm/i915/execlists: Use rmb() to order CSB reads
drm/i915/userptr: reject zero user_size
drm: Match sysfs name in link removal to link creation
|
|
ccio_cujo20_fixup() is called by dino_probe() only, which is in init
section already.
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
No other architecture has setup_profiling_timer() in the init section,
thus on parisc we face this section mismatch warning:
Reference from the function devm_device_add_group() to the function .init.text:setup_profiling_timer()
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
The 0-DAY kernel test infrastructure reported that inet_put_port() may
reference the find_pa_parent_type() function, so it can't be moved into the
init section.
Fixes: b86db40e1ecc ("parisc: Move various functions and strings to init section")
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
All T&M instruments should also work with rigol_quirk = 1 code path.
So remove unnecessary code in rigol_quirk = 0 code path to simplify the driver.
Tested-by: Dave Penkler <dpenkler@gmail.com>
Reviewed-by: Steve Bayless <steve_bayless@keysight.com>
Signed-off-by: Guido Kiener <guido.kiener@rohde-schwarz.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The 'tip' prefix probably referred to the -tip tree and is not required,
remove it.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul Turner <pjt@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180515165328.24899-1-bigeasy@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Since the grub_reclaim() function can be made static, make it so.
Silences the following GCC warning (W=1):
kernel/sched/deadline.c:1120:5: warning: no previous prototype for ‘grub_reclaim’ [-Wmissing-prototypes]
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180516200902.959-1-malat@debian.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
kernel/sched/sched.h
In the following commit:
6b55c9654fcc ("sched/debug: Move print_cfs_rq() declaration to kernel/sched/sched.h")
the print_cfs_rq() prototype was added to <kernel/sched/sched.h>,
right next to the prototypes for print_cfs_stats(), print_rt_stats()
and print_dl_stats().
Finish this previous commit and also move related prototypes for
print_rt_rq() and print_dl_rq().
Remove existing extern declarations now that they not needed anymore.
Silences the following GCC warning, triggered by W=1:
kernel/sched/debug.c:573:6: warning: no previous prototype for ‘print_rt_rq’ [-Wmissing-prototypes]
kernel/sched/debug.c:603:6: warning: no previous prototype for ‘print_dl_rq’ [-Wmissing-prototypes]
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180516195348.30426-1-malat@debian.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Userptr IOCTL zero size check (Matt)
- Two hardware quirk fixes (Michel & Chris)
* tag 'drm-intel-fixes-2018-05-17' of git://anongit.freedesktop.org/drm/drm-intel:
drm/i915/gen9: Add WaClearHIZ_WM_CHICKEN3 for bxt and glk
drm/i915/execlists: Use rmb() to order CSB reads
drm/i915/userptr: reject zero user_size
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
"Two k10temp fixes:
- fix race condition when accessing System Management Network
registers
- fix reading critical temperatures on F15h M60h and M70h
Also add PCI ID's for the AMD Raven Ridge root bridge"
* tag 'hwmon-for-linus-v4.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (k10temp) Use API function to access System Management Network
x86/amd_nb: Add support for Raven Ridge CPUs
hwmon: (k10temp) Fix reading critical temperature register
|
|
Rick bisected a regression on large systems which use the x2apic cluster
mode for interrupt delivery to the commit wich reworked the cluster
management.
The problem is caused by a missing initialization of the clusterid field
in the shared cluster data structures. So all structures end up with
cluster ID 0 which only allows sharing between all CPUs which belong to
cluster 0. All other CPUs with a cluster ID > 0 cannot share the data
structure because they cannot find existing data with their cluster
ID. This causes malfunction with IPIs because IPIs are sent to the wrong
cluster and the caller waits for ever that the target CPU handles the IPI.
Add the missing initialization when a upcoming CPU is the first in a
cluster so that the later booting CPUs can find the data and share it for
proper operation.
Fixes: 023a611748fd ("x86/apic/x2apic: Simplify cluster management")
Reported-by: Rick Warner <rick@microway.com>
Bisected-by: Rick Warner <rick@microway.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Rick Warner <rick@microway.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1805171418210.1947@nanos.tec.linutronix.de
|
|
Pull kvm fixes from Paolo Bonzini:
- ARM/ARM64 locking fixes
- x86 fixes: PCID, UMIP, locking
- improved support for recent Windows version that have a 2048 Hz APIC
timer
- rename KVM_HINTS_DEDICATED CPUID bit to KVM_HINTS_REALTIME
- better behaved selftests
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvm: rename KVM_HINTS_DEDICATED to KVM_HINTS_REALTIME
KVM: arm/arm64: VGIC/ITS save/restore: protect kvm_read_guest() calls
KVM: arm/arm64: VGIC/ITS: protect kvm_read_guest() calls with SRCU lock
KVM: arm/arm64: VGIC/ITS: Promote irq_lock() in update_affinity
KVM: arm/arm64: Properly protect VGIC locks from IRQs
KVM: X86: Lower the default timer frequency limit to 200us
KVM: vmx: update sec exec controls for UMIP iff emulating UMIP
kvm: x86: Suppress CR3_PCID_INVD bit only when PCIDs are enabled
KVM: selftests: exit with 0 status code when tests cannot be run
KVM: hyperv: idr_find needs RCU protection
x86: Delay skip of emulated hypercall instruction
KVM: Extend MAX_IRQ_ROUTES to 4096 for all archs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"We have a core fix in the compat code for covering a potential race
(double references), but it's a very minor change.
The rest are all small device-specific quirks, as well as a correction
of the new UAC3 support code"
* tag 'sound-4.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: usb-audio: Use Class Specific EP for UAC3 devices.
ALSA: hda/realtek - Clevo P950ER ALC1220 Fixup
ALSA: usb: mixer: volume quirk for CM102-A+/102S+
ALSA: hda: Add Lenovo C50 All in one to the power_save blacklist
ALSA: control: fix a redundant-copy issue
|
|
KVM_HINTS_DEDICATED seems to be somewhat confusing:
Guest doesn't really care whether it's the only task running on a host
CPU as long as it's not preempted.
And there are more reasons for Guest to be preempted than host CPU
sharing, for example, with memory overcommit it can get preempted on a
memory access, post copy migration can cause preemption, etc.
Let's call it KVM_HINTS_REALTIME which seems to better
match what guests expect.
Also, the flag most be set on all vCPUs - current guests assume this.
Note so in the documentation.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Martin Schwidefsky:
- a fix for the vfio ccw translation code
- update an incorrect email address in the MAINTAINERS file
- fix a division by zero oops in the cpum_sf code found by trinity
- two fixes for the error handling of the qdio code
- several spectre related patches to convert all left-over indirect
branches in the kernel to expoline branches
- update defconfigs to avoid warnings due to the netfilter Kconfig
changes
- avoid several compiler warnings in the kexec_file code for s390
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/qdio: don't release memory in qdio_setup_irq()
s390/qdio: fix access to uninitialized qdio_q fields
s390/cpum_sf: ensure sample frequency of perf event attributes is non-zero
s390: use expoline thunks in the BPF JIT
s390: extend expoline to BC instructions
s390: remove indirect branch from do_softirq_own_stack
s390: move spectre sysfs attribute code
s390/kernel: use expoline for indirect branches
s390/ftrace: use expoline for indirect branches
s390/lib: use expoline for indirect branches
s390/crc32-vx: use expoline for indirect branches
s390: move expoline assembler macros to a header
vfio: ccw: fix cleanup if cp_prefetch fails
s390/kexec_file: add declaration of purgatory related globals
s390: update defconfigs
MAINTAINERS: update s390 zcrypt maintainers email address
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull SELinux fixes from Paul Moore:
"A small pull request to fix a few regressions in the SELinux/SCTP code
with applications that call bind() with AF_UNSPEC/INADDR_ANY.
The individual commit descriptions have more information, but the
commits themselves should be self explanatory"
* tag 'selinux-pr-20180516' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: correctly handle sa_family cases in selinux_sctp_bind_connect()
selinux: fix address family in bind() and connect() to match address/port
selinux: add AF_UNSPEC and INADDR_ANY checks to selinux_socket_bind()
|
|
proc_pid_cmdline_read() and environ_read() directly access the target
process' VM to retrieve the command line and environment. If this
process remaps these areas onto a file via mmap(), the requesting
process may experience various issues such as extra delays if the
underlying device is slow to respond.
Let's simply refuse to access file-backed areas in these functions.
For this we add a new FOLL_ANON gup flag that is passed to all calls
to access_remote_vm(). The code already takes care of such failures
(including unmapped areas). Accesses via /proc/pid/mem were not
changed though.
This was assigned CVE-2018-1120.
Note for stable backports: the patch may apply to kernels prior to 4.11
but silently miss one location; it must be checked that no call to
access_remote_vm() keeps zero as the last argument.
Reported-by: Qualys Security Advisory <qsa@qualys.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Commit 539d39eb2708 ("bcache: fix wrong return value in bch_debug_init()")
returns the return value of debugfs_create_dir() to bcache_init(). When
CONFIG_DEBUG_FS=n, bch_debug_init() always returns 1 and makes
bcache_init() failedi.
This patch makes bch_debug_init() always returns 0 if CONFIG_DEBUG_FS=n,
so bcache can continue to work for the kernels which don't have debugfs
enanbled.
Changelog:
v4: Add Acked-by from Kent Overstreet.
v3: Use IS_ENABLED(CONFIG_DEBUG_FS) to replace #ifdef DEBUG_FS.
v2: Remove a warning information
v1: Initial version.
Fixes: Commit 539d39eb2708 ("bcache: fix wrong return value in bch_debug_init()")
Cc: stable@vger.kernel.org
Signed-off-by: Coly Li <colyli@suse.de>
Reported-by: Massimo B. <massimo.b@gmx.net>
Reported-by: Kai Krakow <kai@kaishome.de>
Tested-by: Kai Krakow <kai@kaishome.de>
Acked-by: Kent Overstreet <kent.overstreet@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Similarly to opal_event_shutdown, opal_nvram_write can be called in
the crash path with irqs disabled. Special case the delay to avoid
sleeping in invalid context.
Fixes: 3b8070335f75 ("powerpc/powernv: Fix OPAL NVRAM driver OPAL_BUSY loops")
Cc: stable@vger.kernel.org # v3.2
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Add I2C/SMBUS Driver entry for STM32 family from ST Microelectronics.
Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
|
|
We set the BTRFS_BALANCE_RESUME flag in the btrfs_recover_balance()
only, which isn't called during the remount. So when resuming from
the paused balance we hit the bug:
kernel: kernel BUG at fs/btrfs/volumes.c:3890!
::
kernel: balance_kthread+0x51/0x60 [btrfs]
kernel: kthread+0x111/0x130
::
kernel: RIP: btrfs_balance+0x12e1/0x1570 [btrfs] RSP: ffffba7d0090bde8
Reproducer:
On a mounted filesystem:
btrfs balance start --full-balance /btrfs
btrfs balance pause /btrfs
mount -o remount,ro /dev/sdb /btrfs
mount -o remount,rw /dev/sdb /btrfs
To fix this set the BTRFS_BALANCE_RESUME flag in
btrfs_resume_balance_async().
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
When a transaction is aborted btrfs_cleanup_transaction is called to
cleanup all the various in-flight bits and pieces which migth be
active. One of those is delalloc inodes - inodes which have dirty
pages which haven't been persisted yet. Currently the process of
freeing such delalloc inodes in exceptional circumstances such as
transaction abort boiled down to calling btrfs_invalidate_inodes whose
sole job is to invalidate the dentries for all inodes related to a
root. This is in fact wrong and insufficient since such delalloc inodes
will likely have pending pages or ordered-extents and will be linked to
the sb->s_inode_list. This means that unmounting a btrfs instance with
an aborted transaction could potentially lead inodes/their pages
visible to the system long after their superblock has been freed. This
in turn leads to a "use-after-free" situation once page shrink is
triggered. This situation could be simulated by running generic/019
which would cause such inodes to be left hanging, followed by
generic/176 which causes memory pressure and page eviction which lead
to touching the freed super block instance. This situation is
additionally detected by the unmount code of VFS with the following
message:
"VFS: Busy inodes after unmount of Self-destruct in 5 seconds. Have a nice day..."
Additionally btrfs hits WARN_ON(!RB_EMPTY_ROOT(&root->inode_tree));
in free_fs_root for the same reason.
This patch aims to rectify the sitaution by doing the following:
1. Change btrfs_destroy_delalloc_inodes so that it calls
invalidate_inode_pages2 for every inode on the delalloc list, this
ensures that all the pages of the inode are released. This function
boils down to calling btrfs_releasepage. During test I observed cases
where inodes on the delalloc list were having an i_count of 0, so this
necessitates using igrab to be sure we are working on a non-freed inode.
2. Since calling btrfs_releasepage might queue delayed iputs move the
call out to btrfs_cleanup_transaction in btrfs_error_commit_super before
calling run_delayed_iputs for the last time. This is necessary to ensure
that delayed iputs are run.
Note: this patch is tagged for 4.14 stable but the fix applies to older
versions too but needs to be backported manually due to conflicts.
CC: stable@vger.kernel.org # 4.14.x: 2b8773313494: btrfs: Split btrfs_del_delalloc_inode into 2 functions
CC: stable@vger.kernel.org # 4.14.x
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add comment to igrab ]
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
This is in preparation of fixing delalloc inodes leakage on transaction
abort. Also export the new function.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
If a btree block, aka. extent buffer, is not available in the extent
buffer cache, it'll be read out from the disk instead, i.e.
btrfs_search_slot()
read_block_for_search() # hold parent and its lock, go to read child
btrfs_release_path()
read_tree_block() # read child
Unfortunately, the parent lock got released before reading child, so
commit 5bdd3536cbbe ("Btrfs: Fix block generation verification race") had
used 0 as parent transid to read the child block. It forces
read_tree_block() not to check if parent transid is different with the
generation id of the child that it reads out from disk.
A simple PoC is included in btrfs/124,
0. A two-disk raid1 btrfs,
1. Right after mkfs.btrfs, block A is allocated to be device tree's root.
2. Mount this filesystem and put it in use, after a while, device tree's
root got COW but block A hasn't been allocated/overwritten yet.
3. Umount it and reload the btrfs module to remove both disks from the
global @fs_devices list.
4. mount -odegraded dev1 and write some data, so now block A is allocated
to be a leaf in checksum tree. Note that only dev1 has the latest
metadata of this filesystem.
5. Umount it and mount it again normally (with both disks), since raid1
can pick up one disk by the writer task's pid, if btrfs_search_slot()
needs to read block A, dev2 which does NOT have the latest metadata
might be read for block A, then we got a stale block A.
6. As parent transid is not checked, block A is marked as uptodate and
put into the extent buffer cache, so the future search won't bother
to read disk again, which means it'll make changes on this stale
one and make it dirty and flush it onto disk.
To avoid the problem, parent transid needs to be passed to
read_tree_block().
In order to get a valid parent transid, we need to hold the parent's
lock until finishing reading child.
This patch needs to be slightly adapted for stable kernels, the
&first_key parameter added to read_tree_block() is from 4.16+
(581c1760415c4). The fix is to replace 0 by 'gen'.
Fixes: 5bdd3536cbbe ("Btrfs: Fix block generation verification race")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Incompat flag of LZO/ZSTD compression should be set at:
1. mount time (-o compress/compress-force)
2. when defrag is done
3. when property is set
Currently 3. is missing and this commit adds this.
This could lead to a filesystem that uses ZSTD but is not marked as
such. If a kernel without a ZSTD support encounteres a ZSTD compressed
extent, it will handle that but this could be confusing to the user.
Typically the filesystem is mounted with the ZSTD option, but the
discrepancy can arise when a filesystem is never mounted with ZSTD and
then the property on some file is set (and some new extents are
written). A simple mount with -o compress=zstd will fix that up on an
unpatched kernel.
Same goes for LZO, but this has been around for a very long time
(2.6.37) so it's unlikely that a pre-LZO kernel would be used.
Fixes: 5c1aab1dd544 ("btrfs: Add zstd support")
CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Tomohiro Misono <misono.tomohiro@jp.fujitsu.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add user visible impact ]
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
In commit 471d557afed1 ("Btrfs: fix loss of prealloc extents past i_size
after fsync log replay"), on fsync, we started to always log all prealloc
extents beyond an inode's i_size in order to avoid losing them after a
power failure. However under some cases this can lead to the log replay
code to create duplicate extent items, with different lengths, in the
extent tree. That happens because, as of that commit, we can now log
extent items based on extent maps that are not on the "modified" list
of extent maps of the inode's extent map tree. Logging extent items based
on extent maps is used during the fast fsync path to save time and for
this to work reliably it requires that the extent maps are not merged
with other adjacent extent maps - having the extent maps in the list
of modified extents gives such guarantee.
Consider the following example, captured during a long run of fsstress,
which illustrates this problem.
We have inode 271, in the filesystem tree (root 5), for which all of the
following operations and discussion apply to.
A buffered write starts at offset 312391 with a length of 933471 bytes
(end offset at 1245862). At this point we have, for this inode, the
following extent maps with the their field values:
em A, start 0, orig_start 0, len 40960, block_start 18446744073709551613,
block_len 0, orig_block_len 0
em B, start 40960, orig_start 40960, len 376832, block_start 1106399232,
block_len 376832, orig_block_len 376832
em C, start 417792, orig_start 417792, len 782336, block_start
18446744073709551613, block_len 0, orig_block_len 0
em D, start 1200128, orig_start 1200128, len 835584, block_start
1106776064, block_len 835584, orig_block_len 835584
em E, start 2035712, orig_start 2035712, len 245760, block_start
1107611648, block_len 245760, orig_block_len 245760
Extent map A corresponds to a hole and extent maps D and E correspond to
preallocated extents.
Extent map D ends where extent map E begins (1106776064 + 835584 =
1107611648), but these extent maps were not merged because they are in
the inode's list of modified extent maps.
An fsync against this inode is made, which triggers the fast path
(BTRFS_INODE_NEEDS_FULL_SYNC is not set). This fsync triggers writeback
of the data previously written using buffered IO, and when the respective
ordered extent finishes, btrfs_drop_extents() is called against the
(aligned) range 311296..1249279. This causes a split of extent map D at
btrfs_drop_extent_cache(), replacing extent map D with a new extent map
D', also added to the list of modified extents, with the following
values:
em D', start 1249280, orig_start of 1200128,
block_start 1106825216 (= 1106776064 + 1249280 - 1200128),
orig_block_len 835584,
block_len 786432 (835584 - (1249280 - 1200128))
Then, during the fast fsync, btrfs_log_changed_extents() is called and
extent maps D' and E are removed from the list of modified extents. The
flag EXTENT_FLAG_LOGGING is also set on them. After the extents are logged
clear_em_logging() is called on each of them, and that makes extent map E
to be merged with extent map D' (try_merge_map()), resulting in D' being
deleted and E adjusted to:
em E, start 1249280, orig_start 1200128, len 1032192,
block_start 1106825216, block_len 1032192,
orig_block_len 245760
A direct IO write at offset 1847296 and length of 360448 bytes (end offset
at 2207744) starts, and at that moment the following extent maps exist for
our inode:
em A, start 0, orig_start 0, len 40960, block_start 18446744073709551613,
block_len 0, orig_block_len 0
em B, start 40960, orig_start 40960, len 270336, block_start 1106399232,
block_len 270336, orig_block_len 376832
em C, start 311296, orig_start 311296, len 937984, block_start 1112842240,
block_len 937984, orig_block_len 937984
em E (prealloc), start 1249280, orig_start 1200128, len 1032192,
block_start 1106825216, block_len 1032192, orig_block_len 245760
The dio write results in drop_extent_cache() being called twice. The first
time for a range that starts at offset 1847296 and ends at offset 2035711
(length of 188416), which results in a double split of extent map E,
replacing it with two new extent maps:
em F, start 1249280, orig_start 1200128, block_start 1106825216,
block_len 598016, orig_block_len 598016
em G, start 2035712, orig_start 1200128, block_start 1107611648,
block_len 245760, orig_block_len 1032192
It also creates a new extent map that represents a part of the requested
IO (through create_io_em()):
em H, start 1847296, len 188416, block_start 1107423232, block_len 188416
The second call to drop_extent_cache() has a range with a start offset of
2035712 and end offset of 2207743 (length of 172032). This leads to
replacing extent map G with a new extent map I with the following values:
em I, start 2207744, orig_start 1200128, block_start 1107783680,
block_len 73728, orig_block_len 1032192
It also creates a new extent map that represents the second part of the
requested IO (through create_io_em()):
em J, start 2035712, len 172032, block_start 1107611648, block_len 172032
The dio write set the inode's i_size to 2207744 bytes.
After the dio write the inode has the following extent maps:
em A, start 0, orig_start 0, len 40960, block_start 18446744073709551613,
block_len 0, orig_block_len 0
em B, start 40960, orig_start 40960, len 270336, block_start 1106399232,
block_len 270336, orig_block_len 376832
em C, start 311296, orig_start 311296, len 937984, block_start 1112842240,
block_len 937984, orig_block_len 937984
em F, start 1249280, orig_start 1200128, len 598016,
block_start 1106825216, block_len 598016, orig_block_len 598016
em H, start 1847296, orig_start 1200128, len 188416,
block_start 1107423232, block_len 188416, orig_block_len 835584
em J, start 2035712, orig_start 2035712, len 172032,
block_start 1107611648, block_len 172032, orig_block_len 245760
em I, start 2207744, orig_start 1200128, len 73728,
block_start 1107783680, block_len 73728, orig_block_len 1032192
Now do some change to the file, like adding a xattr for example and then
fsync it again. This triggers a fast fsync path, and as of commit
471d557afed1 ("Btrfs: fix loss of prealloc extents past i_size after fsync
log replay"), we use the extent map I to log a file extent item because
it's a prealloc extent and it starts at an offset matching the inode's
i_size. However when we log it, we create a file extent item with a value
for the disk byte location that is wrong, as can be seen from the
following output of "btrfs inspect-internal dump-tree":
item 1 key (271 EXTENT_DATA 2207744) itemoff 3782 itemsize 53
generation 22 type 2 (prealloc)
prealloc data disk byte 1106776064 nr 1032192
prealloc data offset 1007616 nr 73728
Here the disk byte value corresponds to calculation based on some fields
from the extent map I:
1106776064 = block_start (1107783680) - 1007616 (extent_offset)
extent_offset = 2207744 (start) - 1200128 (orig_start) = 1007616
The disk byte value of 1106776064 clashes with disk byte values of the
file extent items at offsets 1249280 and 1847296 in the fs tree:
item 6 key (271 EXTENT_DATA 1249280) itemoff 3568 itemsize 53
generation 20 type 2 (prealloc)
prealloc data disk byte 1106776064 nr 835584
prealloc data offset 49152 nr 598016
item 7 key (271 EXTENT_DATA 1847296) itemoff 3515 itemsize 53
generation 20 type 1 (regular)
extent data disk byte 1106776064 nr 835584
extent data offset 647168 nr 188416 ram 835584
extent compression 0 (none)
item 8 key (271 EXTENT_DATA 2035712) itemoff 3462 itemsize 53
generation 20 type 1 (regular)
extent data disk byte 1107611648 nr 245760
extent data offset 0 nr 172032 ram 245760
extent compression 0 (none)
item 9 key (271 EXTENT_DATA 2207744) itemoff 3409 itemsize 53
generation 20 type 2 (prealloc)
prealloc data disk byte 1107611648 nr 245760
prealloc data offset 172032 nr 73728
Instead of the disk byte value of 1106776064, the value of 1107611648
should have been logged. Also the data offset value should have been
172032 and not 1007616.
After a log replay we end up getting two extent items in the extent tree
with different lengths, one of 835584, which is correct and existed
before the log replay, and another one of 1032192 which is wrong and is
based on the logged file extent item:
item 12 key (1106776064 EXTENT_ITEM 835584) itemoff 3406 itemsize 53
refs 2 gen 15 flags DATA
extent data backref root 5 objectid 271 offset 1200128 count 2
item 13 key (1106776064 EXTENT_ITEM 1032192) itemoff 3353 itemsize 53
refs 1 gen 22 flags DATA
extent data backref root 5 objectid 271 offset 1200128 count 1
Obviously this leads to many problems and a filesystem check reports many
errors:
(...)
checking extents
Extent back ref already exists for 1106776064 parent 0 root 5 owner 271 offset 1200128 num_refs 1
extent item 1106776064 has multiple extent items
ref mismatch on [1106776064 835584] extent item 2, found 3
Incorrect local backref count on 1106776064 root 5 owner 271 offset 1200128 found 2 wanted 1 back 0x55b1d0ad7680
Backref 1106776064 root 5 owner 271 offset 1200128 num_refs 0 not found in extent tree
Incorrect local backref count on 1106776064 root 5 owner 271 offset 1200128 found 1 wanted 0 back 0x55b1d0ad4e70
Backref bytes do not match extent backref, bytenr=1106776064, ref bytes=835584, backref bytes=1032192
backpointer mismatch on [1106776064 835584]
checking free space cache
block group 1103101952 has wrong amount of free space
failed to load free space cache for block group 1103101952
checking fs roots
(...)
So fix this by logging the prealloc extents beyond the inode's i_size
based on searches in the subvolume tree instead of the extent maps.
Fixes: 471d557afed1 ("Btrfs: fix loss of prealloc extents past i_size after fsync log replay")
CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Disabling pm runtime at probe is not sufficient to get BAM working
on remotely controller instances. pm_runtime_get_sync() would return
-EACCES in such cases.
So check if runtime pm is enabled before returning error from bam functions.
Fixes: 5b4a68952a89 ("dmaengine: qcom: bam_dma: disable runtime pm on remote controlled")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
git://people.freedesktop.org/~thomash/linux into drm-fixes
A single fix for a recent regression.
* 'vmwgfx-fixes-4.17' of git://people.freedesktop.org/~thomash/linux:
drm/vmwgfx: Set dmabuf_size when vmw_dmabuf_init is successful
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
- core: Fix regression in dev node offsets (Haneen)
- vc4: Fix memory leak on driver close (Eric)
- dumb-buffers: Prevent overflow in DIV_ROUND_UP() (Dan)
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
* tag 'drm-misc-fixes-2018-05-16' of git://anongit.freedesktop.org/drm/drm-misc:
drm/dumb-buffers: Integer overflow in drm_mode_create_ioctl()
drm/vc4: Fix leak of the file_priv that stored the perfmon.
drm: Match sysfs name in link removal to link creation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"Some of the ftrace internal events use a zero for a data size of a
field event. This is increasingly important for the histogram trigger
work that is being extended.
While auditing trace events, I found that a couple of the xen events
were used as just marking that a function was called, by creating a
static array of size zero. This can play havoc with the tracing
features if these events are used, because a zero size of a static
array is denoted as a special nul terminated dynamic array (this is
what the trace_marker code uses). But since the xen events have no
size, they are not nul terminated, and unexpected results may occur.
As trace events were never intended on being a marker to denote that a
function was hit or not, especially since function tracing and kprobes
can trivially do the same, the best course of action is to simply
remove these events"
* tag 'trace-v4.17-rc4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing/x86/xen: Remove zero data size trace events trace_xen_mmu_flush_tlb{_all}
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull memory barrier for from Steven Rostedt:
"The memory barrier usage in updating the random ptr hash for %p in
vsprintf is incorrect.
Instead of adding the read memory barrier into vsprintf() which will
cause a slight degradation to a commonly used function in the kernel
just to solve a very unlikely race condition that can only happen at
boot up, change the code from using a variable branch to a
static_branch.
Not only does this solve the race condition, it actually will improve
the performance of vsprintf() by removing the conditional branch that
is only needed at boot"
* tag 'trace-v4.17-rc5-vsprintf' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
vsprintf: Replace memory barrier with static_key for random_ptr_key update
|
|
stub_probe() calls put_busid_priv() in an error path when device isn't
found in the busid_table. Fix it by making put_busid_priv() safe to be
called with null struct bus_id_priv pointer.
This problem happens when "usbip bind" is run without loading usbip_host
driver and then running modprobe. The first failed bind attempt unbinds
the device from the original driver and when usbip_host is modprobed,
stub_probe() runs and doesn't find the device in its busid table and calls
put_busid_priv(0 with null bus_id_priv pointer.
usbip-host 3-10.2: 3-10.2 is not in match_busid table... skip!
[ 367.359679] =====================================
[ 367.359681] WARNING: bad unlock balance detected!
[ 367.359683] 4.17.0-rc4+ #5 Not tainted
[ 367.359685] -------------------------------------
[ 367.359688] modprobe/2768 is trying to release lock (
[ 367.359689]
==================================================================
[ 367.359696] BUG: KASAN: null-ptr-deref in print_unlock_imbalance_bug+0x99/0x110
[ 367.359699] Read of size 8 at addr 0000000000000058 by task modprobe/2768
[ 367.359705] CPU: 4 PID: 2768 Comm: modprobe Not tainted 4.17.0-rc4+ #5
Fixes: 22076557b07c ("usbip: usbip_host: fix NULL-ptr deref and use-after-free errors") in usb-linus
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There is a comment here which says that DIV_ROUND_UP() and that's where
the problem comes from. Say you pick:
args->bpp = UINT_MAX - 7;
args->width = 4;
args->height = 1;
The integer overflow in DIV_ROUND_UP() means "cpp" is UINT_MAX / 8 and
because of how we picked args->width that means cpp < UINT_MAX / 4.
I've fixed it by preventing the integer overflow in DIV_ROUND_UP(). I
removed the check for !cpp because it's not possible after this change.
I also changed all the 0xffffffffU references to U32_MAX.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180516140026.GA19340@mwanda
|
|
Reviewing Tobin's patches for getting pointers out early before
entropy has been established, I noticed that there's a lone smp_mb() in
the code. As with most lone memory barriers, this one appears to be
incorrectly used.
We currently basically have this:
get_random_bytes(&ptr_key, sizeof(ptr_key));
/*
* have_filled_random_ptr_key==true is dependent on get_random_bytes().
* ptr_to_id() needs to see have_filled_random_ptr_key==true
* after get_random_bytes() returns.
*/
smp_mb();
WRITE_ONCE(have_filled_random_ptr_key, true);
And later we have:
if (unlikely(!have_filled_random_ptr_key))
return string(buf, end, "(ptrval)", spec);
/* Missing memory barrier here. */
hashval = (unsigned long)siphash_1u64((u64)ptr, &ptr_key);
As the CPU can perform speculative loads, we could have a situation
with the following:
CPU0 CPU1
---- ----
load ptr_key = 0
store ptr_key = random
smp_mb()
store have_filled_random_ptr_key
load have_filled_random_ptr_key = true
BAD BAD BAD! (you're so bad!)
Because nothing prevents CPU1 from loading ptr_key before loading
have_filled_random_ptr_key.
But this race is very unlikely, but we can't keep an incorrect smp_mb() in
place. Instead, replace the have_filled_random_ptr_key with a static_branch
not_filled_random_ptr_key, that is initialized to true and changed to false
when we get enough entropy. If the update happens in early boot, the
static_key is updated immediately, otherwise it will have to wait till
entropy is filled and this happens in an interrupt handler which can't
enable a static_key, as that requires a preemptible context. In that case, a
work_queue is used to enable it, as entropy already took too long to
establish in the first place waiting a little more shouldn't hurt anything.
The benefit of using the static key is that the unlikely branch in
vsprintf() now becomes a nop.
Link: http://lkml.kernel.org/r/20180515100558.21df515e@gandalf.local.home
Cc: stable@vger.kernel.org
Fixes: ad67b74d2469d ("printk: hash addresses printed with %p")
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
cleanup_trampoline() relocates the top-level page table out of
trampoline memory. We use 'top_pgtable' as our new top-level page table.
But if the 'top_pgtable' would be referenced from C in a usual way,
the address of the table will be calculated relative to RIP.
After kernel gets relocated, the address will be in the middle of
decompression buffer and the page table may get overwritten.
This leads to a crash.
We calculate the address of other page tables relative to the relocation
address. It makes them safe. We should do the same for 'top_pgtable'.
Calculate the address of 'top_pgtable' in assembly and pass down to
cleanup_trampoline().
Move the page table to .pgtable section where the rest of page tables
are. The section is @nobits so we save 4k in kernel image.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: e9d0e6330eb8 ("x86/boot/compressed/64: Prepare new top-level page table for trampoline")
Link: http://lkml.kernel.org/r/20180516080131.27913-3-kirill.shutemov@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Eric and Hugh have reported instant reboot due to my recent changes in
decompression code.
The root cause is that I didn't realize that we need to adjust GOT to be
able to run C code that early.
The problem is only visible with an older toolchain. Binutils >= 2.24 is
able to eliminate GOT references by replacing them with RIP-relative
address loads:
https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;a=commitdiff;h=80d873266dec
We need to adjust GOT two times:
- before calling paging_prepare() using the initial load address
- before calling C code from the relocated kernel
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Reported-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: 194a9749c73d ("x86/boot/compressed/64: Handle 5-level paging boot if kernel is above 4G")
Link: http://lkml.kernel.org/r/20180516080131.27913-2-kirill.shutemov@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
RWSEM_OWNER_UNKNOWN
The filesystem freezing code needs to transfer ownership of a rwsem
embedded in a percpu-rwsem from the task that does the freezing to
another one that does the thawing by calling percpu_rwsem_release()
after freezing and percpu_rwsem_acquire() before thawing.
However, the new rwsem debug code runs afoul with this scheme by warning
that the task that releases the rwsem isn't the one that acquires it,
as reported by Amir Goldstein:
DEBUG_LOCKS_WARN_ON(sem->owner != get_current())
WARNING: CPU: 1 PID: 1401 at /home/amir/build/src/linux/kernel/locking/rwsem.c:133 up_write+0x59/0x79
Call Trace:
percpu_up_write+0x1f/0x28
thaw_super_locked+0xdf/0x120
do_vfs_ioctl+0x270/0x5f1
ksys_ioctl+0x52/0x71
__x64_sys_ioctl+0x16/0x19
do_syscall_64+0x5d/0x167
entry_SYSCALL_64_after_hwframe+0x49/0xbe
To work properly with the rwsem debug code, we need to annotate that the
rwsem ownership is unknown during the tranfer period until a brave soul
comes forward to acquire the ownership. During that period, optimistic
spinning will be disabled.
Reported-by: Amir Goldstein <amir73il@gmail.com>
Tested-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jan Kara <jack@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Theodore Y. Ts'o <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-fsdevel@vger.kernel.org
Link: http://lkml.kernel.org/r/1526420991-21213-3-git-send-email-longman@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
There are use cases where a rwsem can be acquired by one task, but
released by another task. In thess cases, optimistic spinning may need
to be disabled. One example will be the filesystem freeze/thaw code
where the task that freezes the filesystem will acquire a write lock
on a rwsem and then un-owns it before returning to userspace. Later on,
another task will come along, acquire the ownership, thaw the filesystem
and release the rwsem.
Bit 0 of the owner field was used to designate that it is a reader
owned rwsem. It is now repurposed to mean that the owner of the rwsem
is not known. If only bit 0 is set, the rwsem is reader owned. If bit
0 and other bits are set, it is writer owned with an unknown owner.
One such value for the latter case is (-1L). So we can set owner to 1 for
reader-owned, -1 for writer-owned. The owner is unknown in both cases.
To handle transfer of rwsem ownership, the higher level code should
set the owner field to -1 to indicate a write-locked rwsem with unknown
owner. Optimistic spinning will be disabled in this case.
Once the higher level code figures who the new owner is, it can then
set the owner field accordingly.
Tested-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jan Kara <jack@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Theodore Y. Ts'o <tytso@mit.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: linux-fsdevel@vger.kernel.org
Link: http://lkml.kernel.org/r/1526420991-21213-2-git-send-email-longman@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Factor in clear values wherever required while updating destination
min/max.
References: HSDES#1604444184
Signed-off-by: Michel Thierry <michel.thierry@intel.com>
Cc: mesa-dev@lists.freedesktop.org
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180510200708.18097-1-michel.thierry@intel.com
Cc: stable@vger.kernel.org
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180514165445.9198-1-michel.thierry@intel.com
(backported from commit 0c79f9cb77eae28d48a4f9fc1b3341aacbbd260c)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
SOU primary plane prepare_fb hook depends upon dmabuf_size to pin up BO
(and not call a new vmw_dmabuf_init) when a new fb size is same as
current fb. This was changed in a recent commit which is causing
page_flip to fail on VM with low display memory and multi-mon failure
when cycle monitors from secondary display.
Cc: <stable@vger.kernel.org> # 4.14, 4.16
Fixes: 20fb5a635a0c ("drm/vmwgfx: Unpin the screen object backup buffer when not used")
Signed-off-by: Deepak Rawat <drawat@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
|
|
Clock driver is mandatory if the machine is selected.
Then don't use 'bool' and 'depends on' commands, but 'def_bool'
with the machine(s).
Fixes: da32d3539fca ("clk: stm32: add configuration flags for each of the stm32 drivers")
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Acked-by: Alexandre TORGUE <alexandre.torgue@st.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
On i.MX6 ULL using PLL3 seems to cause a freeze when setting
the parent to IMX6UL_CLK_PLL3_USB_OTG. This only seems to appear
since commit 6f9575e55632 ("clk: imx: Add CLK_IS_CRITICAL flag
for busy divider and busy mux"), probably because the clock is
now forced to be on.
Fixes: 6f9575e55632("clk: imx: Add CLK_IS_CRITICAL flag for busy divider and busy mux")
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into fixes
Second set of fixes for TI DaVinci.
They are needed for DM6467 EVM to work. The first patch fixes an
issue with timer interrupt and the second two are needed for video
driver to probe successfully.
* tag 'davinci-fixes-for-v4.17-part-2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: davinci: board-dm646x-evm: set VPIF capture card name
ARM: davinci: board-dm646x-evm: pass correct I2C adapter id for VPIF
ARM: davinci: dm646x: fix timer interrupt generation
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
for_each_cpu() unintuitively reports CPU0 as set independent of the actual
cpumask content on UP kernels. This causes an unexpected PIT interrupt
storm on a UP kernel running in an SMP virtual machine on Hyper-V, and as
a result, the virtual machine can suffer from a strange random delay of 1~20
minutes during boot-up, and sometimes it can hang forever.
Protect if by checking whether the cpumask is empty before entering the
for_each_cpu() loop.
[ tglx: Use !IS_ENABLED(CONFIG_SMP) instead of #ifdeffery ]
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Josh Poulson <jopoulso@microsoft.com>
Cc: "Michael Kelley (EOSG)" <Michael.H.Kelley@microsoft.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: stable@vger.kernel.org
Cc: Rakib Mullick <rakib.mullick@gmail.com>
Cc: Jork Loeser <Jork.Loeser@microsoft.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: KY Srinivasan <kys@microsoft.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Link: https://lkml.kernel.org/r/KL1P15301MB000678289FE55BA365B3279ABF990@KL1P15301MB0006.APCP153.PROD.OUTLOOK.COM
Link: https://lkml.kernel.org/r/KL1P15301MB0006FA63BC22BEB64902EAA0BF930@KL1P15301MB0006.APCP153.PROD.OUTLOOK.COM
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull AFS fixes from David Howells:
"Here's a set of patches that fix a number of bugs in the in-kernel AFS
client, including:
- Fix directory locking to not use individual page locks for
directory reading/scanning but rather to use a semaphore on the
afs_vnode struct as the directory contents must be read in a single
blob and data from different reads must not be mixed as the entire
contents may be shuffled about between reads.
- Fix address list parsing to handle port specifiers correctly.
- Only give up callback records on a server if we actually talked to
that server (we might not be able to access a server).
- Fix some callback handling bugs, including refcounting,
whole-volume callbacks and when callbacks actually get broken in
response to a CB.CallBack op.
- Fix some server/address rotation bugs, including giving up if we
can't probe a server; giving up if a server says it doesn't have a
volume, but there are more servers to try.
- Fix the decoding of fetched statuses to be OpenAFS compatible.
- Fix the handling of server lookups in Cache Manager ops (such as
CB.InitCallBackState3) to use a UUID if possible and to handle no
server being found.
- Fix a bug in server lookup where not all addresses are compared.
- Fix the non-encryption of calls that prevents some servers from
being accessed (this also requires an AF_RXRPC patch that has
already gone in through the net tree).
There's also a patch that adds tracepoints to log Cache Manager ops
that don't find a matching server, either by UUID or by address"
* tag 'afs-fixes-20180514' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
afs: Fix the non-encryption of calls
afs: Fix CB.CallBack handling
afs: Fix whole-volume callback handling
afs: Fix afs_find_server search loop
afs: Fix the handling of an unfound server in CM operations
afs: Add a tracepoint to record callbacks from unlisted servers
afs: Fix the handling of CB.InitCallBackState3 to find the server by UUID
afs: Fix VNOVOL handling in address rotation
afs: Fix AFSFetchStatus decoder to provide OpenAFS compatibility
afs: Fix server rotation's handling of fileserver probe failure
afs: Fix refcounting in callback registration
afs: Fix giving up callbacks on server destruction
afs: Fix address list parsing
afs: Fix directory page locking
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two small driver fixes: aacraid to fix an unknown IU type on task
management functions which causes a firmware fault and vmw_pvscsi to
change a return code to retry the operation instead of causing an
immediate error"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: aacraid: Correct hba_send to include iu_type
scsi: vmw-pvscsi: return DID_BUS_BUSY for adapter-initated aborts
|
