summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2022-10-12Merge tag 'for-linus-6.1-rc1-tag' of ↵Linus Torvalds12-242/+313
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen updates from Juergen Gross: - Some minor typo fixes - A fix of the Xen pcifront driver for supporting the device model to run in a Linux stub domain - A cleanup of the pcifront driver - A series to enable grant-based virtio with Xen on x86 - A cleanup of Xen PV guests to distinguish between safe and faulting MSR accesses - Two fixes of the Xen gntdev driver - Two fixes of the new xen grant DMA driver * tag 'for-linus-6.1-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: Kconfig: Fix spelling mistake "Maxmium" -> "Maximum" xen/pv: support selecting safe/unsafe msr accesses xen/pv: refactor msr access functions to support safe and unsafe accesses xen/pv: fix vendor checks for pmu emulation xen/pv: add fault recovery control to pmu msr accesses xen/virtio: enable grant based virtio on x86 xen/virtio: use dom0 as default backend for CONFIG_XEN_VIRTIO_FORCE_GRANT xen/virtio: restructure xen grant dma setup xen/pcifront: move xenstore config scanning into sub-function xen/gntdev: Accommodate VMA splitting xen/gntdev: Prevent leaking grants xen/virtio: Fix potential deadlock when accessing xen_grant_dma_devices xen/virtio: Fix n_pages calculation in xen_grant_dma_map(unmap)_page() xen/xenbus: Fix spelling mistake "hardward" -> "hardware" xen-pcifront: Handle missed Connected state
2022-10-12Merge tag 'mm-hotfixes-stable-2022-10-11' of ↵Linus Torvalds6-24/+52
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc hotfixes from Andrew Morton: "Five hotfixes - three for nilfs2, two for MM. For are cc:stable, one is not" * tag 'mm-hotfixes-stable-2022-10-11' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: nilfs2: fix leak of nilfs_root in case of writer thread creation failure nilfs2: fix NULL pointer dereference at nilfs_bmap_lookup_at_level() nilfs2: fix use-after-free bug of struct nilfs_root mm/damon/core: initialize damon_target->list in damon_new_target() mm/hugetlb: fix races when looking up a CONT-PTE/PMD size hugetlb page
2022-10-12Merge tag 'mm-nonmm-stable-2022-10-11' of ↵Linus Torvalds154-618/+1145
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-MM updates from Andrew Morton: - hfs and hfsplus kmap API modernization (Fabio Francesco) - make crash-kexec work properly when invoked from an NMI-time panic (Valentin Schneider) - ntfs bugfixes (Hawkins Jiawei) - improve IPC msg scalability by replacing atomic_t's with percpu counters (Jiebin Sun) - nilfs2 cleanups (Minghao Chi) - lots of other single patches all over the tree! * tag 'mm-nonmm-stable-2022-10-11' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (71 commits) include/linux/entry-common.h: remove has_signal comment of arch_do_signal_or_restart() prototype proc: test how it holds up with mapping'less process mailmap: update Frank Rowand email address ia64: mca: use strscpy() is more robust and safer init/Kconfig: fix unmet direct dependencies ia64: update config files nilfs2: replace WARN_ONs by nilfs_error for checkpoint acquisition failure fork: remove duplicate included header files init/main.c: remove unnecessary (void*) conversions proc: mark more files as permanent nilfs2: remove the unneeded result variable nilfs2: delete unnecessary checks before brelse() checkpatch: warn for non-standard fixes tag style usr/gen_init_cpio.c: remove unnecessary -1 values from int file ipc/msg: mitigate the lock contention with percpu counter percpu: add percpu_counter_add_local and percpu_counter_sub_local fs/ocfs2: fix repeated words in comments relay: use kvcalloc to alloc page array in relay_alloc_page_array proc: make config PROC_CHILDREN depend on PROC_FS fs: uninline inode_maybe_inc_iversion() ...
2022-10-12Merge tag 'loongarch-6.1' of ↵Linus Torvalds61-685/+5355
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch updates from Huacai Chen: - Use EXPLICIT_RELOCS (ABIv2.0) - Use generic BUG() handler - Refactor TLB/Cache operations - Add qspinlock support - Add perf events support - Add kexec/kdump support - Add BPF JIT support - Add ACPI-based laptop driver - Update the default config file * tag 'loongarch-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (25 commits) LoongArch: Update Loongson-3 default config file LoongArch: Add ACPI-based generic laptop driver LoongArch: Add BPF JIT support LoongArch: Add some instruction opcodes and formats LoongArch: Move {signed,unsigned}_imm_check() to inst.h LoongArch: Add kdump support LoongArch: Add kexec support LoongArch: Use generic BUG() handler LoongArch: Add SysRq-x (TLB Dump) support LoongArch: Add perf events support LoongArch: Add qspinlock support LoongArch: Use TLB for ioremap() LoongArch: Support access filter to /dev/mem interface LoongArch: Refactor cache probe and flush methods LoongArch: mm: Refactor TLB exception handlers LoongArch: Support R_LARCH_GOT_PC_{LO12,HI20} in modules LoongArch: Support PC-relative relocations in modules LoongArch: Define ELF relocation types added in ABIv2.0 LoongArch: Adjust symbol addressing for AS_HAS_EXPLICIT_RELOCS LoongArch: Add Kconfig option AS_HAS_EXPLICIT_RELOCS ...
2022-10-12Merge tag 'irq-core-2022-10-12' of ↵Linus Torvalds21-127/+788
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull interrupt updates from Thomas Gleixner: "Core code: - Provide a generic wrapper which can be utilized in drivers to handle the problem of force threaded demultiplex interrupts on RT enabled kernels. This avoids conditionals and horrible quirks in drivers all over the place - Fix up affected pinctrl and GPIO drivers to make them cleanly RT safe Interrupt drivers: - A new driver for the FSL MU platform specific MSI implementation - Make irqchip_init() available for pure ACPI based systems - Provide a functional DT binding for the Realtek RTL interrupt chip - The usual DT updates and small code improvements all over the place" * tag 'irq-core-2022-10-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits) irqchip: IMX_MU_MSI should depend on ARCH_MXC irqchip/imx-mu-msi: Fix wrong register offset for 8ulp irqchip/ls-extirq: Fix invalid wait context by avoiding to use regmap dt-bindings: irqchip: Describe the IMX MU block as a MSI controller irqchip: Add IMX MU MSI controller driver dt-bindings: irqchip: renesas,irqc: Add r8a779g0 support irqchip/gic-v3: Fix typo in comment dt-bindings: interrupt-controller: ti,sci-intr: Fix missing reg property in the binding dt-bindings: irqchip: ti,sci-inta: Fix warning for missing #interrupt-cells irqchip: Allow extra fields to be passed to IRQCHIP_PLATFORM_DRIVER_END platform-msi: Export symbol platform_msi_create_irq_domain() irqchip/realtek-rtl: use parent interrupts dt-bindings: interrupt-controller: realtek,rtl-intc: require parents irqchip/realtek-rtl: use irq_domain_add_linear() irqchip: Make irqchip_init() usable on pure ACPI systems bcma: gpio: Use generic_handle_irq_safe() gpio: mlxbf2: Use generic_handle_irq_safe() platform/x86: intel_int0002_vgpio: Use generic_handle_irq_safe() ssb: gpio: Use generic_handle_irq_safe() pinctrl: amd: Use generic_handle_irq_safe() ...
2022-10-12LoongArch: Update Loongson-3 default config fileHuacai Chen1-8/+55
1, Enable ZBOOT, KEXEC and BPF_JIT; 2, Add more patition types; 3, Add some USB Type-C options; 4, Add some common network options; 5, Add some Bluetooth device drivers; 6, Remove obsolete config options (for some detailed information, see Link). Link: https://lore.kernel.org/kernel-janitors/20220929090645.1389-1-lukas.bulwahn@gmail.com/ Co-developed-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Co-developed-by: Youling Tang <tangyouling@loongson.cn> Signed-off-by: Youling Tang <tangyouling@loongson.cn> Co-developed-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-10-12LoongArch: Add ACPI-based generic laptop driverJianmin Lv5-0/+659
This add ACPI-based generic laptop driver for Loongson-3. Some of the codes are derived from drivers/platform/x86/thinkpad_acpi.c. Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-10-12LoongArch: Add BPF JIT supportTiezhu Yang7-0/+1700
BPF programs are normally handled by a BPF interpreter, add BPF JIT support for LoongArch to allow the kernel to generate native code when a program is loaded into the kernel. This will significantly speed-up processing of BPF programs. Co-developed-by: Youling Tang <tangyouling@loongson.cn> Signed-off-by: Youling Tang <tangyouling@loongson.cn> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-10-12LoongArch: Add some instruction opcodes and formatsTiezhu Yang1-5/+174
According to the "Table of Instruction Encoding" in LoongArch Reference Manual [1], add some instruction opcodes and formats which are used in the BPF JIT for LoongArch. [1] https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html#table-of-instruction-encoding Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-10-12LoongArch: Move {signed,unsigned}_imm_check() to inst.hTiezhu Yang2-10/+10
{signed,unsigned}_imm_check() will also be used in the bpf jit, so move them from module.c to inst.h, this is preparation for later patches. Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-10-12LoongArch: Add kdump supportYouling Tang9-8/+227
This patch adds support for kdump. In kdump case the normal kernel will reserve a region for the crash kernel and jump there on panic. Arch-specific functions are added to allow for implementing a crash dump file interface, /proc/vmcore, which can be viewed as a ELF file. A user-space tool, such as kexec-tools, is responsible for allocating a separate region for the core's ELF header within the crash kdump kernel memory and filling it in when executing kexec_load(). Then, its location will be advertised to the crash dump kernel via a command line argument "elfcorehdr=", and the crash dump kernel will preserve this region for later use with arch_reserve_vmcore() at boot time. At the same time, the crash kdump kernel is also limited within the "crashkernel" area via a command line argument "mem=", so as not to destroy the original kernel dump data. In the crash dump kernel environment, /proc/vmcore is used to access the primary kernel's memory with copy_oldmem_page(). I tested kdump on LoongArch machines (Loongson-3A5000) and it works as expected (suggested crashkernel parameter is "crashkernel=512M@2560M"), you may test it by triggering a crash through /proc/sysrq-trigger: $ sudo kexec -p /boot/vmlinux-kdump --reuse-cmdline --append="nr_cpus=1" # echo c > /proc/sysrq-trigger Signed-off-by: Youling Tang <tangyouling@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-10-12LoongArch: Add kexec supportYouling Tang6-1/+400
Add three new files, kexec.h, machine_kexec.c and relocate_kernel.S to the LoongArch architecture, so as to add support for the kexec re-boot mechanism (CONFIG_KEXEC) on LoongArch platforms. Kexec supports loading vmlinux.elf in ELF format and vmlinux.efi in PE format. I tested kexec on LoongArch machines (Loongson-3A5000) and it works as expected: $ sudo kexec -l /boot/vmlinux.efi --reuse-cmdline $ sudo kexec -e Signed-off-by: Youling Tang <tangyouling@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-10-12LoongArch: Use generic BUG() handlerYouling Tang4-12/+84
Inspired by commit 9fb7410f955("arm64/BUG: Use BRK instruction for generic BUG traps"), do similar for LoongArch to use generic BUG() handler. This patch uses the BREAK software breakpoint instruction to generate a trap instead, similarly to most other arches, with the generic BUG code generating the dmesg boilerplate. This allows bug metadata to be moved to a separate table and reduces the amount of inline code at BUG() and WARN() sites. This also avoids clobbering any registers before they can be dumped. To mitigate the size of the bug table further, this patch makes use of the existing infrastructure for encoding addresses within the bug table as 32-bit relative pointers instead of absolute pointers. (Note: this limits the max kernel size to 2GB.) Before patch: [ 3018.338013] lkdtm: Performing direct entry BUG [ 3018.342445] Kernel bug detected[#5]: [ 3018.345992] CPU: 2 PID: 865 Comm: cat Tainted: G D 6.0.0-rc6+ #35 After patch: [ 125.585985] lkdtm: Performing direct entry BUG [ 125.590433] ------------[ cut here ]------------ [ 125.595020] kernel BUG at drivers/misc/lkdtm/bugs.c:78! [ 125.600211] Oops - BUG[#1]: [ 125.602980] CPU: 3 PID: 410 Comm: cat Not tainted 6.0.0-rc6+ #36 Out-of-line file/line data information obtained compared to before. Signed-off-by: Youling Tang <tangyouling@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-10-12LoongArch: Add SysRq-x (TLB Dump) supportHuacai Chen2-0/+67
Add SysRq-x (TLB Dump) support for LoongArch, which is useful for debugging. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-10-12LoongArch: Add perf events supportHuacai Chen6-1/+987
The perf events infrastructure of LoongArch is very similar to old MIPS- based Loongson, so most of the codes are derived from MIPS. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-10-12LoongArch: Add qspinlock supportHuacai Chen4-3/+26
On NUMA system, the performance of qspinlock is better than generic spinlock. Below is the UnixBench test results on a 8 nodes (4 cores per node, 32 cores in total) machine. A. With generic spinlock: System Benchmarks Index Values BASELINE RESULT INDEX Dhrystone 2 using register variables 116700.0 449574022.5 38523.9 Double-Precision Whetstone 55.0 85190.4 15489.2 Execl Throughput 43.0 14696.2 3417.7 File Copy 1024 bufsize 2000 maxblocks 3960.0 143157.8 361.5 File Copy 256 bufsize 500 maxblocks 1655.0 37631.8 227.4 File Copy 4096 bufsize 8000 maxblocks 5800.0 444814.2 766.9 Pipe Throughput 12440.0 5047490.7 4057.5 Pipe-based Context Switching 4000.0 2021545.7 5053.9 Process Creation 126.0 23829.8 1891.3 Shell Scripts (1 concurrent) 42.4 33756.7 7961.5 Shell Scripts (8 concurrent) 6.0 4062.9 6771.5 System Call Overhead 15000.0 2479748.6 1653.2 ======== System Benchmarks Index Score 2955.6 B. With qspinlock: System Benchmarks Index Values BASELINE RESULT INDEX Dhrystone 2 using register variables 116700.0 449467876.9 38514.8 Double-Precision Whetstone 55.0 85174.6 15486.3 Execl Throughput 43.0 14769.1 3434.7 File Copy 1024 bufsize 2000 maxblocks 3960.0 146150.5 369.1 File Copy 256 bufsize 500 maxblocks 1655.0 37496.8 226.6 File Copy 4096 bufsize 8000 maxblocks 5800.0 447527.0 771.6 Pipe Throughput 12440.0 5175989.2 4160.8 Pipe-based Context Switching 4000.0 2207747.8 5519.4 Process Creation 126.0 25125.5 1994.1 Shell Scripts (1 concurrent) 42.4 33461.2 7891.8 Shell Scripts (8 concurrent) 6.0 4024.7 6707.8 System Call Overhead 15000.0 2917278.6 1944.9 ======== System Benchmarks Index Score 3040.1 Signed-off-by: Rui Wang <wangrui@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-10-12LoongArch: Use TLB for ioremap()Huacai Chen7-56/+184
We can support more cache attributes (e.g., CC, SUC and WUC) and page protection when we use TLB for ioremap(). The implementation is based on GENERIC_IOREMAP. The existing simple ioremap() implementation has better performance so we keep it and introduce ARCH_IOREMAP to control the selection. We move pagetable_init() earlier to make early ioremap() works, and we modify the PCI ecam mapping because the TLB-based version of ioremap() will actually take the size into account. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-10-12LoongArch: Support access filter to /dev/mem interfaceHuacai Chen3-0/+34
Accidental access to /dev/mem is obviously disastrous, but specific access can be used by people debugging the kernel. So select GENERIC_ LIB_DEVMEM_IS_ALLOWED, as well as define ARCH_HAS_VALID_PHYS_ADDR_RANGE and related helpers, to support access filter to /dev/mem interface. Signed-off-by: Weihao Li <liweihao@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-10-12LoongArch: Refactor cache probe and flush methodsHuacai Chen10-267/+236
Current cache probe and flush methods have some drawbacks: 1, Assume there are 3 cache levels and only 3 levels; 2, Assume L1 = I + D, L2 = V, L3 = S, V is exclusive, S is inclusive. However, the fact is I + D, I + D + V, I + D + S and I + D + V + S are all valid. So, refactor the cache probe and flush methods to adapt more types of cache hierarchy. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-10-12LoongArch: mm: Refactor TLB exception handlersRui Wang1-290/+247
This patch simplifies TLB load, store and modify exception handlers: 1. Reduce instructions, such as alu/csr and memory access; 2. Execute tlb search instruction only in the fast path; 3. Return directly from the fast path for both normal and huge pages; 4. Re-tab the assembly for better vertical alignment. And fixes the concurrent modification issue of fast path for huge pages. This issue will occur in the following steps: CPU-1 (In TLB exception) CPU-2 (In THP splitting) 1: Load PMD entry (HUGE=1) 2: Goto huge path 3: Store PMD entry (HUGE=0) 4: Reload PMD entry (HUGE=0) 5: Fill TLB entry (PA is incorrect) This patch also slightly improves the TLB processing performance: * Normal pages: 2.15%, Huge pages: 1.70%. #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <sys/mman.h> int main(int argc, char *argv[]) { size_t page_size; size_t mem_size; size_t off; void *base; int flags; int i; if (argc < 2) { fprintf(stderr, "%s MEM_SIZE [HUGE]\n", argv[0]); return -1; } page_size = sysconf(_SC_PAGESIZE); flags = MAP_PRIVATE | MAP_ANONYMOUS; mem_size = strtoul(argv[1], NULL, 10); if (argc > 2) flags |= MAP_HUGETLB; for (i = 0; i < 10; i++) { base = mmap(NULL, mem_size, PROT_READ, flags, -1, 0); if (base == MAP_FAILED) { fprintf(stderr, "Map memory failed!\n"); return -1; } for (off = 0; off < mem_size; off += page_size) *(volatile int *)(base + off); munmap(base, mem_size); } return 0; } Signed-off-by: Rui Wang <wangrui@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-10-12LoongArch: Support R_LARCH_GOT_PC_{LO12,HI20} in modulesXi Ruoyao4-7/+99
GCC >= 13 and GNU assembler >= 2.40 use these relocations to address external symbols, so we need to add them. Let the module loader emit GOT entries for data symbols so we would be able to handle GOT relocations. The GOT entry is just the data's symbol address. In module.lds, emit a stub .got section for a section header entry. The actual content of the section entry will be filled at runtime by module_ frob_arch_sections(). Tested-by: WANG Xuerui <git@xen0n.name> Signed-off-by: Xi Ruoyao <xry111@xry111.site> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-10-12LoongArch: Support PC-relative relocations in modulesXi Ruoyao2-1/+75
Binutils >= 2.40 uses R_LARCH_B26 instead of R_LARCH_SOP_PUSH_PLT_PCREL, and R_LARCH_PCALA* instead of R_LARCH_SOP_PUSH_PCREL. Handle R_LARCH_B26 and R_LARCH_PCALA* in the module loader. For R_LARCH_ B26, also create a PLT entry as needed. Tested-by: WANG Xuerui <git@xen0n.name> Signed-off-by: Xi Ruoyao <xry111@xry111.site> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-10-12LoongArch: Define ELF relocation types added in ABIv2.0Xi Ruoyao2-1/+38
These relocation types are used by GNU binutils >= 2.40 and GCC >= 13. Add their definitions so we will be able to use them in later patches. Link: https://github.com/loongson/LoongArch-Documentation/pull/57 Tested-by: WANG Xuerui <git@xen0n.name> Signed-off-by: Xi Ruoyao <xry111@xry111.site> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-10-12LoongArch: Adjust symbol addressing for AS_HAS_EXPLICIT_RELOCSXi Ruoyao4-6/+37
If explicit relocation hints are used by the toolchain, -Wa,-mla-* options will be useless for the C code. So only use them for the !CONFIG_AS_HAS_EXPLICIT_RELOCS case. Replace "la" with "la.pcrel" in head.S to keep the semantic consistent with new and old toolchains for the low level startup code. For per-CPU variables, the "address" of the symbol is actually an offset from $r21. The value is near the loading address of main kernel image, but far from the loading address of modules. So we use model("extreme") attibute to tell the compiler that a PC-relative addressing with 32-bit offset is not sufficient for local per-CPU variables. The behavior with different assemblers and compilers are summarized in the following table: AS has CC has explicit relocs explicit relocs * Behavior ============================================================== No No Use la.* macros. No change from Linux 6.0. -------------------------------------------------------------- No Yes Disable explicit relocs. No change from Linux 6.0. -------------------------------------------------------------- Yes No Not supported. -------------------------------------------------------------- Yes Yes Enable explicit relocs. No -Wa,-mla* options used. ============================================================== *: We assume CC must have model attribute if it has explicit relocs. Both features are added in GCC 13 development cycle, so any GCC release >= 13 should be OK. Using early GCC 13 development snapshots may produce modules with unsupported relocations. Link: https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=f09482a Link: https://gcc.gnu.org/r13-1834 Link: https://gcc.gnu.org/r13-2199 Tested-by: WANG Xuerui <git@xen0n.name> Signed-off-by: Xi Ruoyao <xry111@xry111.site> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-10-12LoongArch: Add Kconfig option AS_HAS_EXPLICIT_RELOCSXi Ruoyao1-0/+3
GNU as >= 2.40 and GCC >= 13 will support using explicit relocation hints in the assembly code, instead of la.* macros. The usage of explicit relocation hints can improve code generation so it's enabled by default by GCC >= 13. Introduce a Kconfig option AS_HAS_EXPLICIT_RELOCS as the switch for "use explicit relocation hints or not". Tested-by: WANG Xuerui <git@xen0n.name> Signed-off-by: Xi Ruoyao <xry111@xry111.site> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-10-12LoongArch: Kconfig: Fix spelling mistake "delibrately" -> "deliberately"Colin Ian King1-1/+1
There is a spelling mistake in a commented section. Fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-10-12LoongArch: Mark __xchg() and __cmpxchg() as __always_inlineHuacai Chen1-4/+4
Commit ac7c3e4ff401 ("compiler: enable CONFIG_OPTIMIZE_INLINING forcibly") allows compiler to uninline functions marked as 'inline'. In case of __xchg()/__cmpxchg() this would cause to reference BUILD_BUG(), which is an error case for catching bugs and will not happen for correct code, if __xchg()/__cmpxchg() is inlined. This bug can be produced with CONFIG_DEBUG_SECTION_MISMATCH enabled, and the solution is similar to below commits: 46f1619500d0225 ("MIPS: include: Mark __xchg as __always_inline"), 88356d09904bc60 ("MIPS: include: Mark __cmpxchg as __always_inline"). Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-10-12LoongArch: Flush TLB earlier at initializationHuacai Chen1-2/+3
Move local_flush_tlb_all() earlier (just after setup_ptwalker() and before page allocation). This can avoid stale TLB entries misguiding the later page allocation. Without this patch the second kernel of kexec/kdump fails to boot SMP. BTW, move output_pgtable_bits_defines() into tlb_init() since it has nothing to do with tlb handler setup. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-10-12LoongArch: Do not create sysfs control file for io master CPUsTiezhu Yang3-6/+7
Now io master CPUs are not hotpluggable on LoongArch, but in the current code only /sys/devices/system/cpu/cpu0/online is not created. Let us set the hotpluggable field of all the io master CPUs as 0, then prevent to create sysfs control file for all the io master CPUs which confuses some user space tools. This is similar with commit 9cce844abf07 ("MIPS: CPU#0 is not hotpluggable"). Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-10-12LoongArch: Fix cpu name after CPU-hotplugJianmin Lv1-1/+3
Don't overwrite the SMBIOS-provided CPU name on coming back from CPU- hotplug (including S3/S4) if it is already initialized. Reviewed-by: WANG Xuerui <git@xen0n.name> Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2022-10-12Merge tag 'irqchip-fixes-6.1-1' of ↵Thomas Gleixner3-28/+68
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core Pull irqchip fixes from Marc Zyngier: - Fix IMX-MU Kconfig, keeping it private to IMX - Fix a register offset for the same IMX-MU driver - Fix the ls-extirq irqchip driver that would use the wrong flavour of spinlocks Link: https://lore.kernel.org/r/20221012075125.1244143-1-maz@kernel.org
2022-10-12irqchip: IMX_MU_MSI should depend on ARCH_MXCGeert Uytterhoeven1-3/+4
The Freescale/NXP i.MX Messaging Unit is only present on Freescale/NXP i.MX SoCs. Hence add a dependency on ARCH_MXC, to prevent asking the user about this driver when configuring a kernel without Freescale/NXP i.MX SoC family support. While at it, expand "MU" to "Messaging Unit" in the help text. Fixes: 70afdab904d2d1e6 ("irqchip: Add IMX MU MSI controller driver") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/7f3bd932614ddbff46a1b750ef45b231130364ad.1664900434.git.geert+renesas@glider.be
2022-10-12xen: Kconfig: Fix spelling mistake "Maxmium" -> "Maximum"Colin Ian King1-1/+1
There is a spelling mistake in a Kconfig description. Fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Acked-by: Stefano Stabellini <sstabellini@kernel.org> Link: https://lore.kernel.org/r/20221007203500.2756787-1-colin.i.king@gmail.com Signed-off-by: Juergen Gross <jgross@suse.com>
2022-10-11Merge tag 'memblock-v6.1-rc1' of ↵Linus Torvalds8-336/+2662
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock Pull memblock updates from Mike Rapoport: "Test suite improvements: - Added verification that memblock allocations zero the allocated memory - Added more test cases for memblock_add(), memblock_remove(), memblock_reserve() and memblock_free() - Added tests for memblock_*_raw() family - Added tests for NUMA-aware allocations in memblock_alloc_try_nid() and memblock_alloc_try_nid_raw()" * tag 'memblock-v6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock: memblock tests: add generic NUMA tests for memblock_alloc_try_nid* memblock tests: add bottom-up NUMA tests for memblock_alloc_try_nid* memblock tests: add top-down NUMA tests for memblock_alloc_try_nid* memblock tests: add simulation of physical memory with multiple NUMA nodes memblock_tests: move variable declarations to single block memblock tests: remove 'cleared' from comment blocks memblock tests: add tests for memblock_trim_memory memblock tests: add tests for memblock_*bottom_up functions memblock tests: update alloc_nid_api to test memblock_alloc_try_nid_raw memblock tests: update alloc_api to test memblock_alloc_raw memblock tests: add additional tests for basic api and memblock_alloc memblock tests: add labels to verbose output for generic alloc tests memblock tests: update zeroed memory check for memblock_alloc_* tests memblock tests: update tests to check if memblock_alloc zeroed memory memblock tests: update reference to obsolete build option in comments memblock tests: add command line help option
2022-10-11Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds51-511/+991
Pull more kvm updates from Paolo Bonzini: "The main batch of ARM + RISC-V changes, and a few fixes and cleanups for x86 (PMU virtualization and selftests). ARM: - Fixes for single-stepping in the presence of an async exception as well as the preservation of PSTATE.SS - Better handling of AArch32 ID registers on AArch64-only systems - Fixes for the dirty-ring API, allowing it to work on architectures with relaxed memory ordering - Advertise the new kvmarm mailing list - Various minor cleanups and spelling fixes RISC-V: - Improved instruction encoding infrastructure for instructions not yet supported by binutils - Svinval support for both KVM Host and KVM Guest - Zihintpause support for KVM Guest - Zicbom support for KVM Guest - Record number of signal exits as a VCPU stat - Use generic guest entry infrastructure x86: - Misc PMU fixes and cleanups. - selftests: fixes for Hyper-V hypercall - selftests: fix nx_huge_pages_test on TDP-disabled hosts - selftests: cleanups for fix_hypercall_test" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (57 commits) riscv: select HAVE_POSIX_CPU_TIMERS_TASK_WORK RISC-V: KVM: Use generic guest entry infrastructure RISC-V: KVM: Record number of signal exits as a vCPU stat RISC-V: KVM: add __init annotation to riscv_kvm_init() RISC-V: KVM: Expose Zicbom to the guest RISC-V: KVM: Provide UAPI for Zicbom block size RISC-V: KVM: Make ISA ext mappings explicit RISC-V: KVM: Allow Guest use Zihintpause extension RISC-V: KVM: Allow Guest use Svinval extension RISC-V: KVM: Use Svinval for local TLB maintenance when available RISC-V: Probe Svinval extension form ISA string RISC-V: KVM: Change the SBI specification version to v1.0 riscv: KVM: Apply insn-def to hlv encodings riscv: KVM: Apply insn-def to hfence encodings riscv: Introduce support for defining instructions riscv: Add X register names to gpr-nums KVM: arm64: Advertise new kvmarm mailing list kvm: vmx: keep constant definition format consistent kvm: mmu: fix typos in struct kvm_arch KVM: selftests: Fix nx_huge_pages_test on TDP-disabled hosts ...
2022-10-11nilfs2: fix leak of nilfs_root in case of writer thread creation failureRyusuke Konishi1-4/+3
If nilfs_attach_log_writer() failed to create a log writer thread, it frees a data structure of the log writer without any cleanup. After commit e912a5b66837 ("nilfs2: use root object to get ifile"), this causes a leak of struct nilfs_root, which started to leak an ifile metadata inode and a kobject on that struct. In addition, if the kernel is booted with panic_on_warn, the above ifile metadata inode leak will cause the following panic when the nilfs2 kernel module is removed: kmem_cache_destroy nilfs2_inode_cache: Slab cache still has objects when called from nilfs_destroy_cachep+0x16/0x3a [nilfs2] WARNING: CPU: 8 PID: 1464 at mm/slab_common.c:494 kmem_cache_destroy+0x138/0x140 ... RIP: 0010:kmem_cache_destroy+0x138/0x140 Code: 00 20 00 00 e8 a9 55 d8 ff e9 76 ff ff ff 48 8b 53 60 48 c7 c6 20 70 65 86 48 c7 c7 d8 69 9c 86 48 8b 4c 24 28 e8 ef 71 c7 00 <0f> 0b e9 53 ff ff ff c3 48 81 ff ff 0f 00 00 77 03 31 c0 c3 53 48 ... Call Trace: <TASK> ? nilfs_palloc_freev.cold.24+0x58/0x58 [nilfs2] nilfs_destroy_cachep+0x16/0x3a [nilfs2] exit_nilfs_fs+0xa/0x1b [nilfs2] __x64_sys_delete_module+0x1d9/0x3a0 ? __sanitizer_cov_trace_pc+0x1a/0x50 ? syscall_trace_enter.isra.19+0x119/0x190 do_syscall_64+0x34/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd ... </TASK> Kernel panic - not syncing: panic_on_warn set ... This patch fixes these issues by calling nilfs_detach_log_writer() cleanup function if spawning the log writer thread fails. Link: https://lkml.kernel.org/r/20221007085226.57667-1-konishi.ryusuke@gmail.com Fixes: e912a5b66837 ("nilfs2: use root object to get ifile") Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Reported-by: syzbot+7381dc4ad60658ca4c05@syzkaller.appspotmail.com Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-11nilfs2: fix NULL pointer dereference at nilfs_bmap_lookup_at_level()Ryusuke Konishi1-0/+2
If the i_mode field in inode of metadata files is corrupted on disk, it can cause the initialization of bmap structure, which should have been called from nilfs_read_inode_common(), not to be called. This causes a lockdep warning followed by a NULL pointer dereference at nilfs_bmap_lookup_at_level(). This patch fixes these issues by adding a missing sanitiy check for the i_mode field of metadata file's inode. Link: https://lkml.kernel.org/r/20221002030804.29978-1-konishi.ryusuke@gmail.com Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Reported-by: syzbot+2b32eb36c1a825b7a74c@syzkaller.appspotmail.com Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-11nilfs2: fix use-after-free bug of struct nilfs_rootRyusuke Konishi1-1/+16
If the beginning of the inode bitmap area is corrupted on disk, an inode with the same inode number as the root inode can be allocated and fail soon after. In this case, the subsequent call to nilfs_clear_inode() on that bogus root inode will wrongly decrement the reference counter of struct nilfs_root, and this will erroneously free struct nilfs_root, causing kernel oopses. This fixes the problem by changing nilfs_new_inode() to skip reserved inode numbers while repairing the inode bitmap. Link: https://lkml.kernel.org/r/20221003150519.39789-1-konishi.ryusuke@gmail.com Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Reported-by: syzbot+b8c672b0e22615c80fe0@syzkaller.appspotmail.com Reported-by: Khalid Masum <khalid.masum.92@gmail.com> Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-11mm/damon/core: initialize damon_target->list in damon_new_target()SeongJae Park1-0/+1
'struct damon_target' creation function, 'damon_new_target()' is not initializing its '->list' field, unlike other DAMON structs creator functions such as 'damon_new_region()'. Normal users of 'damon_new_target()' initializes the field by adding the target to DAMON context's targets list, but some code could access the uninitialized field. This commit avoids the case by initializing the field in 'damon_new_target()'. Link: https://lkml.kernel.org/r/20221002193130.8227-1-sj@kernel.org Fixes: f23b8eee1871 ("mm/damon/core: implement region-based sampling") Signed-off-by: SeongJae Park <sj@kernel.org> Reported-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-11mm/hugetlb: fix races when looking up a CONT-PTE/PMD size hugetlb pageBaolin Wang3-19/+30
On some architectures (like ARM64), it can support CONT-PTE/PMD size hugetlb, which means it can support not only PMD/PUD size hugetlb (2M and 1G), but also CONT-PTE/PMD size(64K and 32M) if a 4K page size specified. So when looking up a CONT-PTE size hugetlb page by follow_page(), it will use pte_offset_map_lock() to get the pte entry lock for the CONT-PTE size hugetlb in follow_page_pte(). However this pte entry lock is incorrect for the CONT-PTE size hugetlb, since we should use huge_pte_lock() to get the correct lock, which is mm->page_table_lock. That means the pte entry of the CONT-PTE size hugetlb under current pte lock is unstable in follow_page_pte(), we can continue to migrate or poison the pte entry of the CONT-PTE size hugetlb, which can cause some potential race issues, even though they are under the 'pte lock'. For example, suppose thread A is trying to look up a CONT-PTE size hugetlb page by move_pages() syscall under the lock, however antoher thread B can migrate the CONT-PTE hugetlb page at the same time, which will cause thread A to get an incorrect page, if thread A also wants to do page migration, then data inconsistency error occurs. Moreover we have the same issue for CONT-PMD size hugetlb in follow_huge_pmd(). To fix above issues, rename the follow_huge_pmd() as follow_huge_pmd_pte() to handle PMD and PTE level size hugetlb, which uses huge_pte_lock() to get the correct pte entry lock to make the pte entry stable. Mike said: Support for CONT_PMD/_PTE was added with bb9dd3df8ee9 ("arm64: hugetlb: refactor find_num_contig()"). Patch series "Support for contiguous pte hugepages", v4. However, I do not believe these code paths were executed until migration support was added with 5480280d3f2d ("arm64/mm: enable HugeTLB migration for contiguous bit HugeTLB pages") I would go with 5480280d3f2d for the Fixes: targe. Link: https://lkml.kernel.org/r/635f43bdd85ac2615a58405da82b4d33c6e5eb05.1662017562.git.baolin.wang@linux.alibaba.com Fixes: 5480280d3f2d ("arm64/mm: enable HugeTLB migration for contiguous bit HugeTLB pages") Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Suggested-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: David Hildenbrand <david@redhat.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-11include/linux/entry-common.h: remove has_signal comment of ↵Tiezhu Yang1-1/+0
arch_do_signal_or_restart() prototype The argument has_signal of arch_do_signal_or_restart() has been removed in commit 8ba62d37949e ("task_work: Call tracehook_notify_signal from get_signal on all architectures"), let us remove the related comment. Link: https://lkml.kernel.org/r/1662090106-5545-1-git-send-email-yangtiezhu@loongson.cn Fixes: 8ba62d37949e ("task_work: Call tracehook_notify_signal from get_signal on all architectures") Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-11proc: test how it holds up with mapping'less processAlexey Dobriyan3-0/+388
Create process without mappings and check /proc/*/maps /proc/*/numa_maps /proc/*/smaps /proc/*/smaps_rollup They must be empty (excluding vsyscall page) or full of zeroes. Retroactively this test should've caught embarassing /proc/*/smaps_rollup oops: [17752.703567] BUG: kernel NULL pointer dereference, address: 0000000000000000 [17752.703580] #PF: supervisor read access in kernel mode [17752.703583] #PF: error_code(0x0000) - not-present page [17752.703587] PGD 0 P4D 0 [17752.703593] Oops: 0000 [#1] PREEMPT SMP PTI [17752.703598] CPU: 0 PID: 60649 Comm: cat Tainted: G W 5.19.9-100.fc35.x86_64 #1 [17752.703603] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./X99 Extreme6/3.1, BIOS P3.30 08/05/2016 [17752.703607] RIP: 0010:show_smaps_rollup+0x159/0x2e0 Note 1: ProtectionKey field in /proc/*/smaps is optional, so check most of its contents, not everything. Note 2: due to the nature of this test, child process hardly can signal its readiness (after unmapping everything!) to parent. I feel like "sleep(1)" is justified. If you know how to do it without sleep please tell me. Note 3: /proc/*/statm is not tested but can be. Link: https://lkml.kernel.org/r/Yz3liL6Dn+n2SD8Q@localhost.localdomain Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-11mailmap: update Frank Rowand email addressFrank Rowand1-0/+1
Frank is no longer at Sony, add an entry for his latest Sony email Link: https://lkml.kernel.org/r/20221001015009.3994518-1-frowand.list@gmail.com Signed-off-by: Frank Rowand <frank.rowand@sony.com> Cc: Tim Bird <Tim.Bird@sony.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-11ia64: mca: use strscpy() is more robust and saferxu xin1-1/+1
The implementation of strscpy() is more robust and safer. That's now the recommended way to copy NUL terminated strings. Link: https://lkml.kernel.org/r/20220930061950.288290-1-xu.xin16@zte.com.cn Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Xu Panda <xu.panda@zte.com.cn> Signed-off-by: xu xin <xu.xin16@zte.com.cn> Cc: Haowen Bai <baihaowen@meizu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-11init/Kconfig: fix unmet direct dependenciesRen Zhijie1-0/+1
Commit 3c07bfce92a5 ("proc: make config PROC_CHILDREN depend on PROC_FS") make config PROC_CHILDREN depend on PROC_FS. When CONFIG_PROC_FS is not set and CONFIG_CHECKPOINT_RESTORE=y, make menuconfig screams like this: WARNING: unmet direct dependencies detected for PROC_CHILDREN Depends on [n]: PROC_FS [=n] Selected by [y]: - CHECKPOINT_RESTORE [=y] CHECKPOINT_RESTORE would select PROC_CHILDREN which depends on PROC_FS, so add depends on PROC_FS to CHECKPOINT_RESTORE to fix this. Link: https://lkml.kernel.org/r/20220929070057.59044-1-renzhijie2@huawei.com Fixes: 3c07bfce92a5 ("proc: make config PROC_CHILDREN depend on PROC_FS") Signed-off-by: Ren Zhijie <renzhijie2@huawei.com> Reviewed-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-11ia64: update config filesLukas Bulwahn5-10/+0
Clean up config files by: - removing configs that were deleted in the past - removing configs not in tree and without recently pending patches - adding new configs that are replacements for old configs in the file For some detailed information, see Link. Link: https://lore.kernel.org/kernel-janitors/20220929090645.1389-1-lukas.bulwahn@gmail.com/ Link: https://lkml.kernel.org/r/20220929101441.32009-1-lukas.bulwahn@gmail.com Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-11nilfs2: replace WARN_ONs by nilfs_error for checkpoint acquisition failureRyusuke Konishi1-4/+10
If creation or finalization of a checkpoint fails due to anomalies in the checkpoint metadata on disk, a kernel warning is generated. This patch replaces the WARN_ONs by nilfs_error, so that a kernel, booted with panic_on_warn, does not panic. A nilfs_error is appropriate here to handle the abnormal filesystem condition. This also replaces the detected error codes with an I/O error so that neither of the internal error codes is returned to callers. Link: https://lkml.kernel.org/r/20220929123330.19658-1-konishi.ryusuke@gmail.com Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Reported-by: syzbot+fbb3e0b24e8dae5a16ee@syzkaller.appspotmail.com Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-11fork: remove duplicate included header filesXu Panda1-1/+0
linux/sched/mm.h is included more than once. Link: https://lkml.kernel.org/r/20220912071556.16811-1-xu.panda@zte.com.cn Signed-off-by: Xu Panda <xu.panda@zte.com.cn> Reported-by: Zeal Robot <zealci@zte.com.cn> Cc: Andy Lutomirski <luto@kernel.org> Cc: Christian Brauner (Microsoft) <brauner@kernel.org> Cc: "Eric W . Biederman" <ebiederm@xmission.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Liam Howlett <liam.howlett@oracle.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-10-11Merge tag 'perf-tools-for-v6.1-1-2022-10-07' of ↵Linus Torvalds236-5281/+15807
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools updates from Arnaldo Carvalho de Melo: - Add support for AMD on 'perf mem' and 'perf c2c', the kernel enablement patches went via tip. Example: $ sudo perf mem record -- -c 10000 ^C[ perf record: Woken up 227 times to write data ] [ perf record: Captured and wrote 58.760 MB perf.data (836978 samples) ] $ sudo perf mem report -F mem,sample,snoop Samples: 836K of event 'ibs_op//', Event count (approx.): 8418762 Memory access Samples Snoop N/A 700620 N/A L1 hit 126675 N/A L2 hit 424 N/A L3 hit 664 HitM L3 hit 10 N/A Local RAM hit 2 N/A Remote RAM (1 hop) hit 8558 N/A Remote Cache (1 hop) hit 3 N/A Remote Cache (1 hop) hit 2 HitM Remote Cache (2 hops) hit 10 HitM Remote Cache (2 hops) hit 6 N/A Uncached hit 4 N/A $ - "perf lock" improvements: - Add -E/--entries option to limit the number of entries to display, say to ask for just the top 5 contended locks. - Add -q/--quiet option to suppress header and debug messages. - Add a 'perf test' kernel lock contention entry to test 'perf lock'. - "perf lock contention" improvements: - Ask BPF's bpf_get_stackid() to skip some callchain entries. The ones closer to the tooling are bpf related and not that interesting, the ones calling the locking function are the ones we're interested in, example of a full, unskipped callstack: - Allow changing the callstack depth and number of entries to skip. 1 10.74 us 10.74 us 10.74 us spinlock __bpf_trace_contention_begin+0xb 0xffffffffc03b5c47 bpf_prog_bf07ae9e2cbd02c5_contention_begin+0x117 0xffffffffc03b5c47 bpf_prog_bf07ae9e2cbd02c5_contention_begin+0x117 0xffffffffbb8b8e75 bpf_trace_run2+0x35 0xffffffffbb7eab9b __bpf_trace_contention_begin+0xb 0xffffffffbb7ebe75 queued_spin_lock_slowpath+0x1f5 0xffffffffbc1c26ff _raw_spin_lock+0x1f 0xffffffffbb841015 tick_do_update_jiffies64+0x25 0xffffffffbb8409ee tick_irq_enter+0x9e - Show full callstack in verbose mode (-v option), sometimes this is desirable instead of showing just one callstack entry. - Allow multiple time ranges in 'perf record --delay' to help in reducing the amount of data collected from hardware tracing (Intel PT, etc) when there is a rough idea of periods of time where events of interest take time. - Add Intel PT to record only decoder debug messages when error happens. - Improve layout of Intel PT man page. - Add new branch types: alignment, data and inst faults and arch specific ones, such as fiq, debug_halt, debug_exit, debug_inst and debug_data on arm64. Kernel enablement went thru the tip tree. - Fix 'perf probe' error log check in 'perf test' when no debuginfo is available. - Fix 'perf stat' aggregation mode logic, it should be looking at the CPU not at the core number. - Fix flags parsing in 'perf trace' filters. - Introduce compact encoding of CPU range encoding on perf.data, to avoid having a bitmap with all the CPUs. - Improvements to the 'perf stat' metrics, including adding "core_wide", and computing "smt" from the CPU topology. - Add support to the new PERF_FORMAT_LOST perf_event_attr.read_format, that allows tooling to ask for the precise number of lost samples for a given event. - Add 'addr' sort key to see just the address of sampled instructions: $ perf record -o- true | perf report -i- -s addr [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.000 MB - ] # Samples: 12 of event 'cycles:u' # Event count (approx.): 252512 # # Overhead Address # ........ .................. 42.96% 0x7f96f08443d7 29.55% 0x7f96f0859b50 14.76% 0x7f96f0852e02 8.30% 0x7f96f0855028 4.43% 0xffffffff8de01087 perf annotate: Toggle full address <-> offset display - Add 'f' hotkey to the 'perf annotate' TUI interface when in 'disassembler output' mode ('o' hotkey) to toggle showing full virtual address or just the offset. - Cache DSO build-ids when synthesizing PERF_RECORD_MMAP records for pre-existing threads, at the start of a 'perf record' session, speeding up that record startup phase. - Add a command line option to specify build ids in 'perf inject'. - Update JSON event files for the Intel alderlake, broadwell, broadwellde, broadwellx, cascadelakex, haswell, haswellx, icelake, icelakex, ivybridge, ivytown, jaketown, sandybridge, sapphirerapids, skylake, skylakex, and tigerlake processors. - Update vendor JSON event files for the ARM Neoverse V1 and E1 platforms. - Add a 'perf test' entry for 'perf mem' where a struct has false sharing and this gets detected in the 'perf mem' output, tested with Intel, AMD and ARM64 systems. - Add a 'perf test' entry to test the resolution of java symbols, where an output like this is expected: 8.18% jshell jitted-50116-29.so [.] Interpreter 0.75% Thread-1 jitted-83602-1670.so [.] jdk.internal.jimage.BasicImageReader.getString(int) - Add tests for the ARM64 CoreSight hardware tracing feature, with specially crafted pureloop, memcpy, thread loop and unroll tread that then gets traced and the output compared with expected output. Documentation explaining it is also included. - Add per thread Intel PT 'perf test' entry to check that PERF_RECORD_TEXT_POKE events are recorded per CPU, resulting in a mixture of per thread and per CPU events and mmaps, verify that this gets all recorded correctly. - Introduce pthread mutex wrappers to allow for building with clang's -Wthread-safety, i.e. using the "guarded_by" "pt_guarded_by" "lockable", "exclusive_lock_function", "exclusive_trylock_function", "exclusive_locks_required", and "no_thread_safety_analysis" compiler function attributes. - Fix empty version number when building outside of a git repo. - Improve feature detection display when multiple versions of a feature are present, such as for binutils libbfd, that has a mix of possible ways to detect according to the Linux distribution. Previously in some cases we had: Auto-detecting system features <SNIP> ... libbfd: [ on ] ... libbfd-liberty: [ on ] ... libbfd-liberty-z: [ on ] <SNIP> Now for this case we show just the main feature: Auto-detecting system features <SNIP> ... libbfd: [ on ] <SNIP> - Remove some unused structs, variables, macros, function prototypes and includes from various places. * tag 'perf-tools-for-v6.1-1-2022-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (169 commits) perf script: Add missing fields in usage hint perf mem: Print "LFB/MAB" for PERF_MEM_LVLNUM_LFB perf mem/c2c: Avoid printing empty lines for unsupported events perf mem/c2c: Add load store event mappings for AMD perf mem/c2c: Set PERF_SAMPLE_WEIGHT for LOAD_STORE events perf mem: Add support for printing PERF_MEM_LVLNUM_{CXL|IO} perf amd ibs: Sync arch/x86/include/asm/amd-ibs.h header with the kernel tools headers UAPI: Sync include/uapi/linux/perf_event.h header with the kernel perf stat: Fix cpu check to use id.cpu.cpu in aggr_printout() perf test coresight: Add relevant documentation about ARM64 CoreSight testing perf test: Add git ignore for tmp and output files of ARM CoreSight tests perf test coresight: Add unroll thread test shell script perf test coresight: Add unroll thread test tool perf test coresight: Add thread loop test shell scripts perf test coresight: Add thread loop test tool perf test coresight: Add memcpy thread test shell script perf test coresight: Add memcpy thread test tool perf test: Add git ignore for perf data generated by the ARM CoreSight tests perf test: Add arm64 asm pureloop test shell script perf test: Add asm pureloop test tool ...
2022-10-11Merge tag 'pci-v6.1-changes' of ↵Linus Torvalds37-642/+1274
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci updates from Bjorn Helgaas: "Resource management: - Distribute spare resources to unconfigured hotplug bridges at boot-time (not just when hot-adding such a bridge), which makes hot-adding devices to docks work better. - Revert to a BAR assignment inherited from firmware only when the address is actually reachable via any upstream bridges, which fixes some cases where firmware doesn't configure all devices. - Add a sysfs interface to resize BARs so this can be done before assigning devices to a VM through VFIO. Power management: - Disable Precision Time Management for all devices on suspend to enable lower-power PM state. We previously did this just for Root Ports, which isn't enough because downstream devices can still generate PTM messages, which cause errors if it's disabled in the Root Port. - Save and restore the ASPM L1 PM Substates configuration for suspend/ resume. Previously this configuration was lost, so L1.x states likely stopped working after resume. - Check whether the L1 PM Substates Capability exists. If it didn't exist, we previously read junk and tried to configure L1 Substates based on that. - Fix the LTR_L1.2_THRESHOLD computation, which previously set a threshold for entering L1.2 that was too low in some cases. - Reduce the delay after transitions to or from D3cold by using usleep_range() rather than msleep(), which often slept for ~19ms instead of the 10ms normally required. The spec says 10ms is enough, but it's possible we could trip over devices that need a little more. Error handling: - Work around a BIOS bug that caused Intel Root Ports to advertise a Root Port Programmed I/O (RP PIO) log size of zero, which caused annoying warnings and prevented the kernel from dumping log registers for DPC errors. Qualcomm PCIe controller driver: - Add support for SC8280XP and SA8540P host controllers and SM8450 endpoint controller. - Disable Master AXI clock on endpoint controllers to save power when link is idle or in L1.x. - Expose link state transition counts via debugfs to help debug issues with low-power states. - Add auto-loading module support. Synopsys DesignWare PCIe controller driver: - Remove a dependency on ZONE_DMA32 by allocating the MSI target page differently. There's more work to do related to eDMA controllers, so it's not completely settled" * tag 'pci-v6.1-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (71 commits) PCI: qcom-ep: Check platform_get_resource_byname() return value PCI: qcom-ep: Add support for SM8450 SoC dt-bindings: PCI: qcom-ep: Add support for SM8450 SoC dt-bindings: PCI: qcom-ep: Define clocks per platform PCI: qcom-ep: Make PERST separation optional dt-bindings: PCI: qcom-ep: Make PERST separation optional PCI: qcom-ep: Disable Master AXI Clock when there is no PCIe traffic PCI: Expose PCIe Resizable BAR support via sysfs PCI/ASPM: Correct LTR_L1.2_THRESHOLD computation PCI/ASPM: Ignore L1 PM Substates if device lacks capability PCI/ASPM: Factor out L1 PM Substates configuration PCI: qcom-ep: Gate Master AXI clock to MHI bus during L1SS PCI: qcom-ep: Expose link transition counts via debugfs PCI: qcom-ep: Disable IRQs during driver remove PCI/ASPM: Save L1 PM Substates Capability for suspend/resume PCI/ASPM: Refactor L1 PM Substates Control Register programming PCI: qcom-ep: Make use of the cached dev pointer PCI: qcom-ep: Rely on the clocks supplied by devicetree PCI: qcom-ep: Add kernel-doc for qcom_pcie_ep structure phy: freescale: imx8m-pcie: Fix the wrong order of phy_init() and phy_power_on() ...
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-06 11:46:40 +0000