summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2015-02-17sg: fix unkillable I/O wait deadlock with scsi-mqTony Battersby1-3/+14
When using the write()/read() interface for submitting commands, the SCSI generic driver does not call blk_put_request() on a completed SCSI command until userspace calls read() to get the command completion. Since scsi-mq uses a fixed number of preallocated requests, this makes it possible for userspace to exhaust the entire preallocated supply of requests. For places in the kernel that call blk_get_request() with GFP_KERNEL, this can cause the calling process to deadlock in a permanent unkillable I/O wait in blk_get_request() -> ... -> bt_get(). For places in the kernel that call blk_get_request() with GFP_ATOMIC, this can cause blk_get_request() always to return -EWOULDBLOCK. Note that these problems happen only if scsi-mq is enabled. Prevent the problems by calling blk_put_request() as soon as the SCSI command completes instead of waiting for userspace to call read(). Cc: <stable@vger.kernel.org> # 3.17+ Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Tested-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2015-02-15sg: fix read() error reportingTony Battersby1-3/+3
Fix SCSI generic read() incorrectly returning success after detecting an error. Cc: <stable@vger.kernel.org> Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2015-02-15wd719x: add missing .module to wd719x_templateOndrej Zary1-0/+1
wd719x_template is missing the .module field, causing module refcount not to work, allowing to rmmod the driver while in use (mounted filesystem), causing an oops. Set .module to THIS_MODULE to fix the problem. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Cc: <stable@vger.kernel.org> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2015-02-15hpsa: correct compiler warnings introduced by hpsa-add-local-workqueue patchDon Brace1-3/+1
Correct compiler warning introduced by hpsa-add-local-workqueue patch 6636e7f455b33b957c5ee016daa6de46148026ab hpsa: Use local workqueues instead of system workqueues Suggested-by: Kees Cook <keescook@chromium.org> Reviewed-by: Scott Teel <scott.teel@pmcs.com> Reviewed-by: Webb Scales <webbnh@hp.com> Signed-off-by: Don Brace <don.brace@pmcs.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2015-02-15fixed invalid assignment of 64bit mask to host dma_boundary for scatter ↵Minh Duc Tran1-1/+0
gather segment boundary limit. In reference to bug https://bugzilla.redhat.com/show_bug.cgi?id=1097141 Assert is seen with AMD cpu whenever calling pci_alloc_consistent. [ 29.406183] ------------[ cut here ]------------ [ 29.410505] kernel BUG at lib/iommu-helper.c:13! Signed-off-by: Minh Tran <minh.tran@emulex.com> Fixes: 6733b39a1301b0b020bbcbf3295852e93e624cb1 Cc: <stable@vger.kernel.org> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2015-02-06fcoe: Transition maintainership to VasuRobert Love1-1/+1
Acked-by: Vasu Dev <vasu.dev@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2015-02-05am53c974: remove left-over debugging codeHannes Reinecke1-6/+0
A shost_printk() statement was left over from debugging. It can safely be removed; the same information is displayed in the debugging message some lines further down. Cc: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-02-04scsi_logging: return void for dev_printk() functionsHannes Reinecke2-15/+11
dev_printk() is now a void function, so the related functions scmd_printk() and sdev_prefix_printk() should be made void, too. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Hannes Reinecke <hare@suse.de> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2015-02-02scsi: print single-character strings with seq_putcRasmus Villemoes15-45/+45
Using seq_putc to print a single character saves at least a strlen() call and a memory access, and may also give a small .text reduction. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-02-02scsi: merge consecutive seq_puts callsRasmus Villemoes4-35/+21
Consecutive seq_puts calls with literal strings may be replaced by a single call, saving a little .text. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-02-02scsi: replace seq_printf with seq_putsRasmus Villemoes21-138/+136
Using seq_printf to print a simple string is a lot more expensive than it needs to be, since seq_puts exists. Replace seq_printf with seq_puts when possible. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-02-02aha152x: replace seq_printf with seq_putsRasmus Villemoes1-124/+124
Using seq_printf to print a simple string is a lot more expensive than it needs to be, since seq_puts exists. Replace seq_printf with seq_puts when possible. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-02-02advansys: replace seq_printf with seq_putsRasmus Villemoes1-80/+75
Using seq_printf to print a simple string is a lot more expensive than it needs to be, since seq_puts exists. Replace seq_printf with seq_puts when possible. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-02-02scsi: remove SPRINTF macroRasmus Villemoes6-273/+252
The macro SPRINTF doesn't save a lot of typing or make the code more readable, and depending on a specific identifier (m) in the surrounding scope is generally frowned upon. Nuke it. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-02-02sg: remove an unused variableBart Van Assche1-16/+1
The 'data_dir' variable is not used in sg_common_write(), hence remove this variable. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Douglas Gilbert <dgilbert@interlog.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-02-02hpsa: Use local workqueues instead of system workqueuesDon Brace2-14/+56
Suggested-by: Tomas Henzl <thenzl@redhat.com> Reviewed-by: Webb Scales <webbnh@hp.com> Reviewed-by: Kevin Barnett <Kevin.Barnett@pmcs.com> Signed-off-by: Don Brace <don.brace@pmcs.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-02-02hpsa: add in P840ar controller model nameDon Brace1-1/+1
Add in P840ar model name for gen9 Reviewed-by: Scott Teel <scott.teel@pmcs.com> Signed-off-by: Don Brace <don.brace@pmcs.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-02-02hpsa: add in gen9 controller model namesDon Brace1-13/+13
Add in gen9 controller model names Reviewed-by: Scott Teel <scott.teel@pmcs.com> Signed-off-by: Don Brace <don.brace@pmcs.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-02-02hpsa: detect and report failures changing controller transport modesRobert Elliott1-11/+29
Detect failues when attempting to change controller to use simple or performant transport modes (mode change ack) rather than just proceeding ahead after timeouts. Return values are added to: hpsa_put_ctlr_into_performant_mode hpsa_wait_for_mode_change_ack and all their callers check/propagate the result. More consistency in printing errors and whether dev_err is used. Reviewed-by: Scott Teel <scott.teel@pmcs.com> Signed-off-by: Robert Elliott <elliott@hp.com> Signed-off-by: Don Brace <don.brace@pmcs.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-02-02hpsa: shorten the wait for the CISS doorbell mode change ackRobert Elliott1-6/+9
Shorten the wait for the CISS configuration table doorbell mode change acknowledgment from 300-600 s to 20 s, which is the value specified in the CISS specification that should be honored by all controllers. Wait using interruptible msleep() rather than uninterruptible usleep_range(), which triggers rt_sched timeout errors if the wait is long. Reviewed-by: Scott Teel <scott.teel@pmcs.com> Signed-off-by: Robert Elliott <elliott@hp.com> Signed-off-by: Don Brace <don.brace@pmcs.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-02-02hpsa: refactor duplicated scan completion code into a new routineWebb Scales1-24/+16
Hoist the conditional out of do_not_scan_if_controller_locked_up() and place it in the caller (this improves the code structure, making it more consistent with other uses and enabling tail-call optimization); rename the function to hpsa_scan_complete(), and use it at the end of hpsa_scan_start() as well. Reviewed-by: Scott Teel <scott.teel@pmcs.com> Signed-off-by: Webb Scales <webbnh@hp.com> Signed-off-by: Don Brace <don.brace@pmcs.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-02-02hpsa: move SG descriptor set-up out of hpsa_scatter_gather()Webb Scales1-7/+14
Move the code which sets up the SG descriptor out of hpsa_scatter_gather() and into a subroutine where it can be reused (in the next patch). The Ext field is now assigned unconditionally: this makes the refactor much simpler, but more importantly it removes a conditional operation from inside the loop. The case for which the conditional formerly tested is now executed (unconditionally) after the loop is exited. Reviewed-by: Scott Teel <scott.teel@pmcs.com> Signed-off-by: Webb Scales <webbnh@hp.com> Signed-off-by: Don Brace <don.brace@pmcs.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-02-02hpsa: do not use function pointers in fast path command submissionStephen Cameron2-7/+6
Performance tweak, avoid unnecessary function calls. Reviewed-by: Scott Teel <scott.teel@pmcs.com> Signed-off-by: Don Brace <don.brace@pmcs.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-02-02hpsa: print CDBs instead of kernel virtual addresses for uncommon errorsStephen Cameron1-13/+16
Printing the address of the command pointer is of little value, change to print the CDB. Reviewed-by: Scott Teel <scott.teel@pmcs.com> Signed-off-by: Don Brace <don.brace@pmcs.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-02-02hpsa: do not use a void pointer for scsi_cmd field of struct CommandListStephen Cameron2-4/+4
There's no reason for it to be a void *, it should be a struct scsi_cmnd * Reviewed-by: Scott Teel <scott.teel@pmcs.com> Signed-off-by: Don Brace <don.brace@pmcs.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-02-02hpsa: return failed from device reset/abort handlersDon Brace1-0/+7
Returning failed from the device reset handler will get the device kicked offline, which is fine if the controller is locked up anyhow. Cannot abort a command from a failed controller. Reviewed-by: Scott Teel <scott.teel@pmcs.com> Reviewed-by: Justin Lindley <justin.lindley@pmcs.com> Signed-off-by: Don Brace <don.brace@pmcs.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-02-02hpsa: check for ctlr lockup after command allocation in main io pathStephen Cameron1-1/+8
Command allocation is the thing that takes the longest in the main i/o path, so check for controller lockup immediately after this to prevent submitting commands to locked up controller as much as possible. Reviewed-by: Scott Teel <scott.teel@pmcs.com> Signed-off-by: Don Brace <don.brace@pmcs.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-02-02hpsa: guard against overflowing raid map arrayStephen Cameron1-0/+3
In the code that translates logical drive LBAs to physical drive LBAs if we overflow the raid map disk data array we will get the wrong answers. We do not expect that to happen, but best to be on the safe side and guard against it anyway. Reviewed-by: Scott Teel <scott.teel@pmcs.com> Signed-off-by: Don Brace <don.brace@pmcs.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-02-02hpsa: do not ack controller events on controllers that do not support itStephen Cameron1-0/+3
Acking controller events on controllers that do not support it can cause such controllers to lock up. Reviewed-by: Scott Teel <scott.teel@pmcs.com> Signed-off-by: Joe Handzik <joseph.t.handzik@hp.com> Signed-off-by: Don Brace <don.brace@pmcs.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-02-02hpsa: remove incorrect BUG_ONs checking for raid offload enableStephen Cameron1-4/+0
In set_encrypt_ioaccel2() and in hpsa_scsi_ioaccel_raid_map there were BUG_ONs that looked like this: BUG_ON(!(dev->offload_config && dev->offload_enabled)); But, In hpsa_ack_ctlr_events() we have this, /* Stop sending new RAID offload reqs via the IO accelerator */ scsi_block_requests(h->scsi_host); for (i = 0; i < h->ndevices; i++) h->dev[i]->offload_enabled = 0; hpsa_drain_accel_commands(h); So, we set offload_enabled = 0 for all drives, then do this drain_accel_commands, so that means accel commands could still be in flight, ie. perhaps having just been submitted into hpsa_scsi_ioaccel_raid_map concurrent with ->offload_enabled having just been set to zero. Reviewed-by: Scott Teel <scott.teel@pmcs.com> Signed-off-by: Don Brace <don.brace@pmcs.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-02-02hpsa: do not check for msi(x) in interrupt_pendingStephen Cameron1-3/+0
No need to check whether interrupt pending for MSI(X) and conversely, no need to check whether MSI(X) interrupts are being used when checking if interrupts are pending. Reviewed-by: Scott Teel <scott.teel@pmcs.com> Signed-off-by: Don Brace <don.brace@pmcs.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-02-02hpsa: slightly optimize SA5_performant_completedDon Brace1-4/+4
Reviewed-by: Scott Teel <scott.teel@pmcs.com> Signed-off-by: Don Brace <don.brace@pmcs.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-02-02hpsa: count passthru cmds with atomics, not a spin locked intDon Brace2-36/+6
Performance enhancement. Remove spin_locks from the driver. Reviewed-by: Scott Teel <scott.teel@pmcs.com> Signed-off-by: Don Brace <don.brace@pmcs.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-02-02hpsa: optimize cmd_alloc function by remembering last allocationRobert Elliott2-2/+6
Empirically, this improves performance slightly (~2% max IOPS) by allowing cmd_alloc to remember where it left off searching for free commands between calls instead of always starting its search at command 0. Reviewed-by: Scott Teel <scott.teel@pmcs.com> Signed-off-by: Robert Elliott <elliott@hp.com> Signed-off-by: Don Brace <don.brace@pmcs.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-02-02hpsa: fix race between abort handler and main i/o pathWebb Scales3-47/+65
This means changing the allocator to reference count commands. The reference count is now the authoritative indicator of whether a command is allocated or not. The h->cmd_pool_bits bitmap is now only a heuristic hint to speed up the allocation process, it is no longer the authoritative record of allocated commands. Since we changed the command allocator to use reference counting as the authoritative indicator of whether a command is allocated, fail_all_outstanding_cmds needs to use the reference count not h->cmd_pool_bits for this purpose. Fix hpsa_drain_accel_commands to use the reference count as the authoritative indicator of whether a command is allocated instead of the h->cmd_pool_bits bitmap. Reviewed-by: Scott Teel <scott.teel@pmcs.com> Signed-off-by: Don Brace <don.brace@pmcs.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-02-02hpsa: honor queue depth of physical devicesDon Brace3-68/+412
When using the ioaccel submission methods, requests destined for RAID volumes are sometimes diverted to physical devices. The OS has no or limited knowledge of these physical devices, so it is up to the driver to avoid pushing the device too hard. It is better to honor the physical device queue limit rather than making the device spew zillions of TASK SET FULL responses. This is so that hpsa based devices support /sys/block/sdNN/device/queue_type of simple, which lets the SCSI midlayer automatically adjust the queue_depth based on TASK SET FULL and GOOD status. Adjust the queue depth for a new device after it is created based on the maximum queue depths of the physical devices that constitute the device. This drops the maximum queue depth from .can_queue of 1024 to something like 174 for single-drive RAID-0, 348 for two-drive RAID-1, etc. It also adjusts for the ratio of data to parity drives. Reviewed-by: Scott Teel <scott.teel@pmcs.com> Signed-off-by: Webb Scales <webbnh@hp.com> Signed-off-by: Don Brace <don.brace@pmcs.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-02-02hpsa: use workqueue to resubmit failed ioaccel commandsDon Brace3-20/+54
Instead of kicking the commands all the way back to the mid layer, use a work queue. This enables having a mechanism for the driver to be able to resubmit the commands down the "normal" raid path without turning off the ioaccel feature entirely whenever an error is encountered on the ioaccel path, and prevent excessive rescanning of devices. Reviewed-by: Scott Teel <scott.teel@pmcs.com> Signed-off-by: Don Brace <don.brace@pmcs.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-02-02hpsa: factor out hpsa_ciss_submit functionStephen Cameron1-59/+67
Factor out the bottom part of the queuecommand function which is the part that builds commands for submitting down the "normal' RAID stack path of a Smart Array. Need to factor this out to improve how commands that were initially sent down one of the "ioaccellerated" paths but which have some sort of error condition are retried down the "normal" path. Reviewed-by: Scott Teel <scott.teel@pmcs.com> Signed-off-by: Don Brace <don.brace@pmcs.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-02-02hpsa: do not request device rescan on every ioaccel path errorStephen Cameron2-13/+2
The original reasoning behind doing this was faulty. An error of some sort would be encountered, accelerated i/o would be disabled for that logical drive, the command would be kicked back out to the SCSI midlayer for a retry, and since i/o accelerator mode was disabled, it would get retried down the RAID path. However, something needs to turn ioaccellerator mode back on, and this rescan request was what did that. However, it was racy, and extremely bad for performance to rescan all devices, so, don't do that. Reviewed-by: Scott Teel <scott.teel@pmcs.com> Signed-off-by: Don Brace <don.brace@pmcs.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-02-02hpsa: do not queue commands internally in driverDon Brace3-295/+38
By not doing maintaining a list of queued commands, we can eliminate some spin locking in the main i/o path and gain significant improvement in IOPS. Remove the queuing code and the code that calls it; remove now-unused interrupt code; remove DIRECT_LOOKUP_BIT. Now that the passthru commands share the same command pool as the main i/o path, and the total size of the pool is less than or equal to the number of commands that will fit in the hardware fifo, there is no need to check to see if we are exceeding the hardware fifo's depth. Reviewed-by: Scott Teel <scott.teel@pmcs.com> Reviewed-by: Robert Elliott <elliott@hp.com> Signed-off-by: Don Brace <don.brace@pmcs.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-02-02hpsa: get rid of cmd_special_alloc and cmd_special_freeStephen Cameron2-77/+31
We have commands reserved for internal use. This is laying the groundwork for removing the internal queue of commands from the driver so that the locks that protect that queue may be removed. Reviewed-by: Scott Teel <scott.teel@pmcs.com> Signed-off-by: Don Brace <don.brace@pmcs.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-02-02hpsa: reserve some commands for use by driverStephen Cameron2-2/+7
We need to reserve some commands for device rescans, aborts, and the pass through ioctls, etc. so we cannot give them all to the scsi mid layer. This is in preparation for removing cmd_special_alloc and cmd_special_free so that we can stop queuing commands internally in the driver so that we can remove the locks thta protect the queue that we will no longer have. Reviewed-by: Scott Teel <scott.teel@pmcs.com> Signed-off-by: Don Brace <don.brace@pmcs.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-02-02hpsa: avoid unneccesary calls to resource freeing functionsRobert Elliott1-2/+4
If hpsa_allocate_cmd_pool failed, we were calling two functions unnecessarily: hpsa_free_sg_chain_blocks(h); hpsa_free_cmd_pool(h); This didn't cause any problem, as those functions can tolerate being called when what they free hasn't been allocated (relevant pointers would be NULL) but it is potentially confusing. Reviewed-by: Scott Teel <scott.teel@pmcs.com> Signed-off-by: Robert Elliott <elliott@hp.com> Signed-off-by: Don Brace <don.brace@pmcs.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-02-02hpsa: fix memory leak in hpsa_alloc_cmd_poolRobert Elliott1-1/+5
Partial allocation failure wasn't handled correctly Reviewed-by: Scott Teel <scott.teel@pmcs.com> Signed-off-by: Robert Elliott <elliott@hp.com> Signed-off-by: Don Brace <don.brace@pmcs.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-02-02hpsa: report allocation failures while allocating SG chain blocksRobert Elliott1-2/+6
Reviewed-by: Scott Teel <scott.teel@pmcs.com> Signed-off-by: Robert Elliott <elliott@hp.com> Signed-off-by: Don Brace <don.brace@pmcs.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-02-02hpsa: pass error from pci_set_consistent_dma_mask from hpsa_messageRobert Elliott1-1/+1
Return the actual error code instead of a generic error code. Reviewed-by: Scott Teel <scott.teel@pmcs.com> Signed-off-by: Robert Elliott <elliott@hp.com> Signed-off-by: Don Brace <don.brace@pmcs.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-02-02hpsa: rename hpsa_request_irq to hpsa_request_irqsRobert Elliott1-5/+6
Make the function name more descriptive. We use more than one interrupt. Reviewed-by: Scott Teel <scott.teel@pmcs.com> Signed-off-by: Robert Elliott <elliott@hp.com> Signed-off-by: Don Brace <don.brace@pmcs.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-02-02hpsa: report failure to ioremap config tableRobert Elliott1-1/+3
Enhance error reporting. Reviewed-by: Scott Teel <scott.teel@pmcs.com> Signed-off-by: Robert Elliott <elliott@hp.com> Signed-off-by: Don Brace <don.brace@pmcs.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-02-02hpsa: trivial message and comment clean upsStephen Cameron1-11/+10
Cleanup comments to be more specific. Make messages more informational. Reviewed-by: Scott Teel <scott.teel@pmcs.com> Signed-off-by: Robert Elliott <elliott@hp.com> Signed-off-by: Don Brace <don.brace@pmcs.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2015-02-02hpsa: refactor hpsa_find_board_params() to encapsulate legacy testWebb Scales1-9/+21
Encapsulate the conditional predicate which tests for legacy controllers in a separate function and rework the code comments. Reviewed-by: Scott Teel <scott.teel@pmcs.com> Signed-off-by: Webb Scales <webbnh@hp.com> Signed-off-by: Don Brace <don.brace@pmcs.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-09 22:12:04 +0000