summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2022-11-29riscv: vdso: fix section overlapping under some conditionsJisheng Zhang1-0/+1
lkp reported a build error, I tried the config and can reproduce build error as below: VDSOLD arch/riscv/kernel/vdso/vdso.so.dbg ld.lld: error: section .note file range overlaps with .text >>> .note range is [0x7C8, 0x803] >>> .text range is [0x800, 0x1993] ld.lld: error: section .text file range overlaps with .dynamic >>> .text range is [0x800, 0x1993] >>> .dynamic range is [0x808, 0x937] ld.lld: error: section .note virtual address range overlaps with .text >>> .note range is [0x7C8, 0x803] >>> .text range is [0x800, 0x1993] Fix it by setting DISABLE_BRANCH_PROFILING which will disable branch tracing for vdso, thus avoid useless _ftrace_annotated_branch section and _ftrace_branch section. Although we can also fix it by removing the hardcoded .text begin address, but I think that's another story and should be put into another patch. Link: https://lore.kernel.org/lkml/202210122123.Cc4FPShJ-lkp@intel.com/#r Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Link: https://lore.kernel.org/r/20221102170254.1925-1-jszhang@kernel.org Fixes: ad5d1122b82f ("riscv: use vDSO common flow to reduce the latency of the time-related functions") Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-11-28riscv: Sync efi page table's kernel mappings before switchingAlexandre Ghiti2-4/+13
The EFI page table is initially created as a copy of the kernel page table. With VMAP_STACK enabled, kernel stacks are allocated in the vmalloc area: if the stack is allocated in a new PGD (one that was not present at the moment of the efi page table creation or not synced in a previous vmalloc fault), the kernel will take a trap when switching to the efi page table when the vmalloc kernel stack is accessed, resulting in a kernel panic. Fix that by updating the efi kernel mappings before switching to the efi page table. Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Fixes: b91540d52a08 ("RISC-V: Add EFI runtime services") Tested-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Reviewed-by: Atish Patra <atishp@rivosinc.com> Link: https://lore.kernel.org/r/20221121133303.1782246-1-alexghiti@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-11-28riscv: Fix NR_CPUS range conditionsSamuel Holland1-3/+3
The conditions reference the symbol SBI_V01, which does not exist. The correct symbol is RISCV_SBI_V01. Fixes: e623715f3d67 ("RISC-V: Increase range and default value of NR_CPUS") Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20221126061557.3541-1-samuel@sholland.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-11-10RISC-V: vdso: Do not add missing symbols to version section in linker scriptNathan Chancellor2-0/+5
Recently, ld.lld moved from '--undefined-version' to '--no-undefined-version' as the default, which breaks the compat vDSO build: ld.lld: error: version script assignment of 'LINUX_4.15' to symbol '__vdso_gettimeofday' failed: symbol not defined ld.lld: error: version script assignment of 'LINUX_4.15' to symbol '__vdso_clock_gettime' failed: symbol not defined ld.lld: error: version script assignment of 'LINUX_4.15' to symbol '__vdso_clock_getres' failed: symbol not defined These symbols are not present in the compat vDSO or the regular vDSO for 32-bit but they are unconditionally included in the version section of the linker script, which is prohibited with '--no-undefined-version'. Fix this issue by only including the symbols that are actually exported in the version section of the linker script. Link: https://github.com/ClangBuiltLinux/linux/issues/1756 Signed-off-by: Nathan Chancellor <nathan@kernel.org> Tested-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20221108171324.3377226-1-nathan@kernel.org/ Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-11-10riscv: fix reserved memory setupConor Dooley2-1/+1
Currently, RISC-V sets up reserved memory using the "early" copy of the device tree. As a result, when trying to get a reserved memory region using of_reserved_mem_lookup(), the pointer to reserved memory regions is using the early, pre-virtual-memory address which causes a kernel panic when trying to use the buffer's name: Unable to handle kernel paging request at virtual address 00000000401c31ac Oops [#1] Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 6.0.0-rc1-00001-g0d9d6953d834 #1 Hardware name: Microchip PolarFire-SoC Icicle Kit (DT) epc : string+0x4a/0xea ra : vsnprintf+0x1e4/0x336 epc : ffffffff80335ea0 ra : ffffffff80338936 sp : ffffffff81203be0 gp : ffffffff812e0a98 tp : ffffffff8120de40 t0 : 0000000000000000 t1 : ffffffff81203e28 t2 : 7265736572203a46 s0 : ffffffff81203c20 s1 : ffffffff81203e28 a0 : ffffffff81203d22 a1 : 0000000000000000 a2 : ffffffff81203d08 a3 : 0000000081203d21 a4 : ffffffffffffffff a5 : 00000000401c31ac a6 : ffff0a00ffffff04 a7 : ffffffffffffffff s2 : ffffffff81203d08 s3 : ffffffff81203d00 s4 : 0000000000000008 s5 : ffffffff000000ff s6 : 0000000000ffffff s7 : 00000000ffffff00 s8 : ffffffff80d9821a s9 : ffffffff81203d22 s10: 0000000000000002 s11: ffffffff80d9821c t3 : ffffffff812f3617 t4 : ffffffff812f3617 t5 : ffffffff812f3618 t6 : ffffffff81203d08 status: 0000000200000100 badaddr: 00000000401c31ac cause: 000000000000000d [<ffffffff80338936>] vsnprintf+0x1e4/0x336 [<ffffffff80055ae2>] vprintk_store+0xf6/0x344 [<ffffffff80055d86>] vprintk_emit+0x56/0x192 [<ffffffff80055ed8>] vprintk_default+0x16/0x1e [<ffffffff800563d2>] vprintk+0x72/0x80 [<ffffffff806813b2>] _printk+0x36/0x50 [<ffffffff8068af48>] print_reserved_mem+0x1c/0x24 [<ffffffff808057ec>] paging_init+0x528/0x5bc [<ffffffff808031ae>] setup_arch+0xd0/0x592 [<ffffffff8080070e>] start_kernel+0x82/0x73c early_init_fdt_scan_reserved_mem() takes no arguments as it operates on initial_boot_params, which is populated by early_init_dt_verify(). On RISC-V, early_init_dt_verify() is called twice. Once, directly, in setup_arch() if CONFIG_BUILTIN_DTB is not enabled and once indirectly, very early in the boot process, by parse_dtb() when it calls early_init_dt_scan_nodes(). This first call uses dtb_early_va to set initial_boot_params, which is not usable later in the boot process when early_init_fdt_scan_reserved_mem() is called. On arm64 for example, the corresponding call to early_init_dt_scan_nodes() uses fixmap addresses and doesn't suffer the same fate. Move early_init_fdt_scan_reserved_mem() further along the boot sequence, after the direct call to early_init_dt_verify() in setup_arch() so that the names use the correct virtual memory addresses. The above supposed that CONFIG_BUILTIN_DTB was not set, but should work equally in the case where it is - unflatted_and_copy_device_tree() also updates initial_boot_params. Reported-by: Valentina Fernandez <valentina.fernandezalanis@microchip.com> Reported-by: Evgenii Shatokhin <e.shatokhin@yadro.com> Link: https://lore.kernel.org/linux-riscv/f8e67f82-103d-156c-deb0-d6d6e2756f5e@microchip.com/ Fixes: 922b0375fc93 ("riscv: Fix memblock reservation for device tree blob") Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Tested-by: Evgenii Shatokhin <e.shatokhin@yadro.com> Link: https://lore.kernel.org/r/20221107151524.3941467-1-conor.dooley@microchip.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-11-10riscv: vdso: fix build with llvmJisheng Zhang1-1/+1
Even after commit 89fd4a1df829 ("riscv: jump_label: mark arguments as const to satisfy asm constraints"), building with CC_OPTIMIZE_FOR_SIZE + LLVM=1 can reproduce below build error: CC arch/riscv/kernel/vdso/vgettimeofday.o In file included from <built-in>:4: In file included from lib/vdso/gettimeofday.c:5: In file included from include/vdso/datapage.h:17: In file included from include/vdso/processor.h:10: In file included from arch/riscv/include/asm/vdso/processor.h:7: In file included from include/linux/jump_label.h:112: arch/riscv/include/asm/jump_label.h:42:3: error: invalid operand for inline asm constraint 'i' " .option push \n\t" ^ 1 error generated. I think the problem is when "-Os" is passed as CFLAGS, it's removed by "CFLAGS_REMOVE_vgettimeofday.o = $(CC_FLAGS_FTRACE) -Os" which is introduced in commit e05d57dcb8c7 ("riscv: Fixup __vdso_gettimeofday broke dynamic ftrace"), thus no optimization at all for vgettimeofday.c arm64 does remove "-Os" as well, but it forces "-O2" after removing "-Os". I compared the generated vgettimeofday.o with "-O2" and "-Os", I think no big performance difference. So let's tell the kbuild not to remove "-Os" rather than follow arm64 style. vdso related performance can be improved a lot when building kernel with CC_OPTIMIZE_FOR_SIZE after this commit, ("-Os" VS no optimization) Fixes: e05d57dcb8c7 ("riscv: Fixup __vdso_gettimeofday broke dynamic ftrace") Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Tested-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20221031182943.2453-1-jszhang@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-11-10riscv: process: fix kernel info leakageJisheng Zhang1-0/+2
thread_struct's s[12] may contain random kernel memory content, which may be finally leaked to userspace. This is a security hole. Fix it by clearing the s[12] array in thread_struct when fork. As for kthread case, it's better to clear the s[12] array as well. Fixes: 7db91e57a0ac ("RISC-V: Task implementation") Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Tested-by: Guo Ren <guoren@kernel.org> Link: https://lore.kernel.org/r/20221029113450.4027-1-jszhang@kernel.org Reviewed-by: Guo Ren <guoren@kernel.org> Link: https://lore.kernel.org/r/CAJF2gTSdVyAaM12T%2B7kXAdRPGS4VyuO08X1c7paE-n4Fr8OtRA@mail.gmail.com/ Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-10-28riscv: dts: sifive unleashed: Add PWM controlled LEDsEmil Renner Berthing1-0/+38
This adds the 4 PWM controlled green LEDs to the HiFive Unleashed device tree. The schematic doesn't specify any special function for the LEDs, so they're added here without any default triggers and named d1, d2, d3 and d4 just like in the schematic. Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Tested-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20221012110928.352910-1-emil.renner.berthing@canonical.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-10-27RISC-V: Fix /proc/cpuinfo cpumask warningAndrew Jones1-0/+3
Commit 78e5a3399421 ("cpumask: fix checking valid cpu range") has started issuing warnings[*] when cpu indices equal to nr_cpu_ids - 1 are passed to cpumask_next* functions. seq_read_iter() and cpuinfo's start and next seq operations implement a pattern like n = cpumask_next(n - 1, mask); show(n); while (1) { ++n; n = cpumask_next(n - 1, mask); if (n >= nr_cpu_ids) break; show(n); } which will issue the warning when reading /proc/cpuinfo. Ensure no warning is generated by validating the cpu index before calling cpumask_next(). [*] Warnings will only appear with DEBUG_PER_CPU_MAPS enabled. Signed-off-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Anup Patel <anup@brainfault.org> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Tested-by: Conor Dooley <conor.dooley@microchip.com> Acked-by: Yury Norov <yury.norov@gmail.com> Link: https://lore.kernel.org/r/20221014155845.1986223-2-ajones@ventanamicro.com/ Fixes: 78e5a3399421 ("cpumask: fix checking valid cpu range") Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-10-27Merge patch series "Fix RISC-V toolchain extension support detection"Palmer Dabbelt3-9/+16
Conor Dooley <conor@kernel.org> says: From: Conor Dooley <conor.dooley@microchip.com> This came up due to a report from Kevin @ kernel-ci, who had been running a mixed configuration of GNU binutils and clang. Their compiler was relatively recent & supports Zicbom but binutils @ 2.35.2 did not. Our current checks for extension support only cover the compiler, but it appears to me that we need to check both the compiler & linker support in case of "pot-luck" configurations that mix different versions of LD,AS,CC etc. Linker support does not seem possible to actually check, since the ISA string is emitted into the object files - so I put in version checks for that. The checks have gotten a bit ugly since 32 & 64 bit support need to be checked independently but ahh well. As I was going, I fell into the trap of there being duplicated checks for CC support in both the Makefile and Kconfig, so as part of renaming the Kconfig symbol to TOOLCHAIN_HAS_FOO, I dropped the extra checks in the Makefile. This has the added advantage of the TOOLCHAIN_HAS_FOO symbol for Zihintpause appearing in .config. I pushed out a version of this that specificly checked for assember support for LKP to test & it looked /okay/ - but I did some more testing today and realised that this is redudant & have since dropped the as check. I tested locally with a fair few different combinations, to try and cover each of AS, LD, CC missing support for the extension. * b4-shazam-merge: riscv: fix detection of toolchain Zihintpause support riscv: fix detection of toolchain Zicbom support Link: https://lore.kernel.org/r/20221006173520.1785507-1-conor@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-10-27riscv: fix detection of toolchain Zihintpause supportConor Dooley3-3/+9
It is not sufficient to check if a toolchain supports a particular extension without checking if the linker supports that extension too. For example, Clang 15 supports Zihintpause but GNU bintutils 2.35.2 does not, leading build errors like so: riscv64-linux-gnu-ld: -march=rv64i2p0_m2p0_a2p0_c2p0_zihintpause2p0: Invalid or unknown z ISA extension: 'zihintpause' Add a TOOLCHAIN_HAS_ZIHINTPAUSE which checks if each of the compiler, assembler and linker support the extension. Replace the ifdef in the vdso with one depending on this new symbol. Fixes: 8eb060e10185 ("arch/riscv: add Zihintpause support") Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20221006173520.1785507-3-conor@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-10-27riscv: fix detection of toolchain Zicbom supportConor Dooley2-6/+7
It is not sufficient to check if a toolchain supports a particular extension without checking if the linker supports that extension too. For example, Clang 15 supports Zicbom but GNU bintutils 2.35.2 does not, leading build errors like so: riscv64-linux-gnu-ld: -march=rv64i2p0_m2p0_a2p0_c2p0_zicbom1p0_zihintpause2p0: Invalid or unknown z ISA extension: 'zicbom' Convert CC_HAS_ZICBOM to TOOLCHAIN_HAS_ZICBOM & check if the linker also supports Zicbom. Reported-by: Kevin Hilman <khilman@baylibre.com> Link: https://github.com/ClangBuiltLinux/linux/issues/1714 Link: https://storage.kernelci.org/next/master/next-20220920/riscv/defconfig+CONFIG_EFI=n/clang-16/logs/kernel.log Fixes: 1631ba1259d6 ("riscv: Add support for non-coherent devices using zicbom extension") Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20221006173520.1785507-2-conor@kernel.org [Palmer: Check for ld-2.38, not 2.39, as 2.38 no longer errors.] Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-10-27riscv: mm: add missing memcpy in kasan_initQinglin Pan1-1/+6
Hi Atish, It seems that the panic is due to the missing memcpy during kasan_init. Could you please check whether this patch is helpful? When doing kasan_populate, the new allocated base_pud/base_p4d should contain kasan_early_shadow_{pud, p4d}'s content. Add the missing memcpy to avoid page fault when read/write kasan shadow region. Tested on: - qemu with sv57 and CONFIG_KASAN on. - qemu with sv48 and CONFIG_KASAN on. Signed-off-by: Qinglin Pan <panqinglin2020@iscas.ac.cn> Tested-by: Atish Patra <atishp@rivosinc.com> Fixes: 8fbdccd2b173 ("riscv: mm: Support kasan for sv57") Link: https://lore.kernel.org/r/20221009083050.3814850-1-panqinglin2020@iscas.ac.cn Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-10-25MAINTAINERS: git://github.com -> https://github.com for sifivePalmer Dabbelt1-1/+1
Github deprecated the git:// links about a year ago, so let's move to the https:// URLs instead. Reported-by: Conor Dooley <conor.dooley@microchip.com> Link: https://github.blog/2021-09-01-improving-git-protocol-security-github/ Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-10-25riscv: jump_label: mark arguments as const to satisfy asm constraintsJisheng Zhang1-4/+4
Samuel reported that the static branch usage in cpu_relax() breaks building with CONFIG_CC_OPTIMIZE_FOR_SIZE: In file included from <command-line>: ./arch/riscv/include/asm/jump_label.h: In function 'cpu_relax': ././include/linux/compiler_types.h:285:33: warning: 'asm' operand 0 probably does not match constraints 285 | #define asm_volatile_goto(x...) asm goto(x) | ^~~ ./arch/riscv/include/asm/jump_label.h:41:9: note: in expansion of macro 'asm_volatile_goto' 41 | asm_volatile_goto( | ^~~~~~~~~~~~~~~~~ ././include/linux/compiler_types.h:285:33: error: impossible constraint in 'asm' 285 | #define asm_volatile_goto(x...) asm goto(x) | ^~~ ./arch/riscv/include/asm/jump_label.h:41:9: note: in expansion of macro 'asm_volatile_goto' 41 | asm_volatile_goto( | ^~~~~~~~~~~~~~~~~ make[1]: *** [scripts/Makefile.build:249: arch/riscv/kernel/vdso/vgettimeofday.o] Error 1 make: *** [arch/riscv/Makefile:128: vdso_prepare] Error 2 Maybe "-Os" prevents GCC from detecting that the key/branch arguments can be treated as constants and used as immediate operands. Inspired by x86's commit 864b435514b2("x86/jump_label: Mark arguments as const to satisfy asm constraints"), and as pointed out by Steven: "The "i" constraint needs to be a constant.", let's do similar modifications to riscv. Tested by CC_OPTIMIZE_FOR_SIZE + gcc and CC_OPTIMIZE_FOR_SIZE + clang. Link: https://lore.kernel.org/linux-riscv/20220922060958.44203-1-samuel@sholland.org/ Link: https://lore.kernel.org/all/20210212094059.5f8d05e8@gandalf.local.home/ Fixes: 8eb060e10185 ("arch/riscv: add Zihintpause support") Reported-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20221008145437.491-1-jszhang@kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-10-16Linux 6.1-rc1v6.1-rc1Linus Torvalds1-2/+2
2022-10-16Merge tag 'random-6.1-rc1-for-linus' of ↵Linus Torvalds185-421/+378
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random Pull more random number generator updates from Jason Donenfeld: "This time with some large scale treewide cleanups. The intent of this pull is to clean up the way callers fetch random integers. The current rules for doing this right are: - If you want a secure or an insecure random u64, use get_random_u64() - If you want a secure or an insecure random u32, use get_random_u32() The old function prandom_u32() has been deprecated for a while now and is just a wrapper around get_random_u32(). Same for get_random_int(). - If you want a secure or an insecure random u16, use get_random_u16() - If you want a secure or an insecure random u8, use get_random_u8() - If you want secure or insecure random bytes, use get_random_bytes(). The old function prandom_bytes() has been deprecated for a while now and has long been a wrapper around get_random_bytes() - If you want a non-uniform random u32, u16, or u8 bounded by a certain open interval maximum, use prandom_u32_max() I say "non-uniform", because it doesn't do any rejection sampling or divisions. Hence, it stays within the prandom_*() namespace, not the get_random_*() namespace. I'm currently investigating a "uniform" function for 6.2. We'll see what comes of that. By applying these rules uniformly, we get several benefits: - By using prandom_u32_max() with an upper-bound that the compiler can prove at compile-time is ≤65536 or ≤256, internally get_random_u16() or get_random_u8() is used, which wastes fewer batched random bytes, and hence has higher throughput. - By using prandom_u32_max() instead of %, when the upper-bound is not a constant, division is still avoided, because prandom_u32_max() uses a faster multiplication-based trick instead. - By using get_random_u16() or get_random_u8() in cases where the return value is intended to indeed be a u16 or a u8, we waste fewer batched random bytes, and hence have higher throughput. This series was originally done by hand while I was on an airplane without Internet. Later, Kees and I worked on retroactively figuring out what could be done with Coccinelle and what had to be done manually, and then we split things up based on that. So while this touches a lot of files, the actual amount of code that's hand fiddled is comfortably small" * tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: prandom: remove unused functions treewide: use get_random_bytes() when possible treewide: use get_random_u32() when possible treewide: use get_random_{u8,u16}() when possible, part 2 treewide: use get_random_{u8,u16}() when possible, part 1 treewide: use prandom_u32_max() when possible, part 2 treewide: use prandom_u32_max() when possible, part 1
2022-10-16Merge tag 'perf-tools-for-v6.1-2-2022-10-16' of ↵Linus Torvalds36-71/+1265
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull more perf tools updates from Arnaldo Carvalho de Melo: - Use BPF CO-RE (Compile Once, Run Everywhere) to support old kernels when using bperf (perf BPF based counters) with cgroups. - Support HiSilicon PCIe Performance Monitoring Unit (PMU), that monitors bandwidth, latency, bus utilization and buffer occupancy. Documented in Documentation/admin-guide/perf/hisi-pcie-pmu.rst. - User space tasks can migrate between CPUs, so when tracing selected CPUs, system-wide sideband is still needed, fix it in the setup of Intel PT on hybrid systems. - Fix metricgroups title message in 'perf list', it should state that the metrics groups are to be used with the '-M' option, not '-e'. - Sync the msr-index.h copy with the kernel sources, adding support for using "AMD64_TSC_RATIO" in filter expressions in 'perf trace' as well as decoding it when printing the MSR tracepoint arguments. - Fix program header size and alignment when generating a JIT ELF in 'perf inject'. - Add multiple new Intel PT 'perf test' entries, including a jitdump one. - Fix the 'perf test' entries for 'perf stat' CSV and JSON output when running on PowerPC due to an invalid topology number in that arch. - Fix the 'perf test' for arm_coresight failures on the ARM Juno system. - Fix the 'perf test' attr entry for PERF_FORMAT_LOST, adding this option to the or expression expected in the intercepted perf_event_open() syscall. - Add missing condition flags ('hs', 'lo', 'vc', 'vs') for arm64 in the 'perf annotate' asm parser. - Fix 'perf mem record -C' option processing, it was being chopped up when preparing the underlying 'perf record -e mem-events' and thus being ignored, requiring using '-- -C CPUs' as a workaround. - Improvements and tidy ups for 'perf test' shell infra. - Fix Intel PT information printing segfault in uClibc, where a NULL format was being passed to fprintf. * tag 'perf-tools-for-v6.1-2-2022-10-16' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (23 commits) tools arch x86: Sync the msr-index.h copy with the kernel sources perf auxtrace arm64: Add support for parsing HiSilicon PCIe Trace packet perf auxtrace arm64: Add support for HiSilicon PCIe Tune and Trace device driver perf auxtrace arm: Refactor event list iteration in auxtrace_record__init() perf tests stat+json_output: Include sanity check for topology perf tests stat+csv_output: Include sanity check for topology perf intel-pt: Fix system_wide dummy event for hybrid perf intel-pt: Fix segfault in intel_pt_print_info() with uClibc perf test: Fix attr tests for PERF_FORMAT_LOST perf test: test_intel_pt.sh: Add 9 tests perf inject: Fix GEN_ELF_TEXT_OFFSET for jit perf test: test_intel_pt.sh: Add jitdump test perf test: test_intel_pt.sh: Tidy some alignment perf test: test_intel_pt.sh: Print a message when skipping kernel tracing perf test: test_intel_pt.sh: Tidy some perf record options perf test: test_intel_pt.sh: Fix return checking again perf: Skip and warn on unknown format 'configN' attrs perf list: Fix metricgroups title message perf mem: Fix -C option behavior for perf mem record perf annotate: Add missing condition flags for arm64 ...
2022-10-16Merge tag 'kbuild-fixes-v6.1' of ↵Linus Torvalds6-11/+18
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Fix CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y compile error for the combination of Clang >= 14 and GAS <= 2.35. - Drop vmlinux.bz2 from the rpm package as it just annoyingly increased the package size. - Fix modpost error under build environments using musl. - Make *.ll files keep value names for easier debugging - Fix single directory build - Prevent RISC-V from selecting the broken DWARF5 support when Clang and GAS are used together. * tag 'kbuild-fixes-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: lib/Kconfig.debug: Add check for non-constant .{s,u}leb128 support to DWARF5 kbuild: fix single directory build kbuild: add -fno-discard-value-names to cmd_cc_ll_c scripts/clang-tools: Convert clang-tidy args to list modpost: put modpost options before argument kbuild: Stop including vmlinux.bz2 in the rpm's Kconfig.debug: add toolchain checks for DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT Kconfig.debug: simplify the dependency of DEBUG_INFO_DWARF4/5
2022-10-16Merge tag 'clk-for-linus' of ↵Linus Torvalds18-129/+1831
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull more clk updates from Stephen Boyd: "This is the final part of the clk patches for this merge window. The clk rate range series needed another week to fully bake. Maxime fixed the bug that broke clk notifiers and prevented this from being included in the first pull request. He also added a unit test on top to make sure it doesn't break so easily again. The majority of the series fixes up how the clk_set_rate_*() APIs work, particularly around when the rate constraints are dropped and how they move around when reparenting clks. Overall it's a much needed improvement to the clk rate range APIs that used to be pretty broken if you looked sideways. Beyond the core changes there are a few driver fixes for a compilation issue or improper data causing clks to fail to register or have the wrong parents. These are good to get in before the first -rc so that the system actually boots on the affected devices" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (31 commits) clk: tegra: Fix Tegra PWM parent clock clk: at91: fix the build with binutils 2.27 clk: qcom: gcc-msm8660: Drop hardcoded fixed board clocks clk: mediatek: clk-mux: Add .determine_rate() callback clk: tests: Add tests for notifiers clk: Update req_rate on __clk_recalc_rates() clk: tests: Add missing test case for ranges clk: qcom: clk-rcg2: Take clock boundaries into consideration for gfx3d clk: Introduce the clk_hw_get_rate_range function clk: Zero the clk_rate_request structure clk: Stop forwarding clk_rate_requests to the parent clk: Constify clk_has_parent() clk: Introduce clk_core_has_parent() clk: Switch from __clk_determine_rate to clk_core_round_rate_nolock clk: Add our request boundaries in clk_core_init_rate_req clk: Introduce clk_hw_init_rate_request() clk: Move clk_core_init_rate_req() from clk_core_round_rate_nolock() to its caller clk: Change clk_core_init_rate_req prototype clk: Set req_rate on reparenting clk: Take into account uncached clocks in clk_set_rate_range() ...
2022-10-16Merge tag '6.1-rc-smb3-client-fixes-part2' of ↵Linus Torvalds23-726/+922
git://git.samba.org/sfrench/cifs-2.6 Pull more cifs updates from Steve French: - fix a regression in guest mounts to old servers - improvements to directory leasing (caching directory entries safely beyond the root directory) - symlink improvement (reducing roundtrips needed to process symlinks) - an lseek fix (to problem where some dir entries could be skipped) - improved ioctl for returning more detailed information on directory change notifications - clarify multichannel interface query warning - cleanup fix (for better aligning buffers using ALIGN and round_up) - a compounding fix - fix some uninitialized variable bugs found by Coverity and the kernel test robot * tag '6.1-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: smb3: improve SMB3 change notification support cifs: lease key is uninitialized in two additional functions when smb1 cifs: lease key is uninitialized in smb1 paths smb3: must initialize two ACL struct fields to zero cifs: fix double-fault crash during ntlmssp cifs: fix static checker warning cifs: use ALIGN() and round_up() macros cifs: find and use the dentry for cached non-root directories also cifs: enable caching of directories for which a lease is held cifs: prevent copying past input buffer boundaries cifs: fix uninitialised var in smb2_compound_op() cifs: improve symlink handling for smb2+ smb3: clarify multichannel warning cifs: fix regression in very old smb1 mounts cifs: fix skipping to incorrect offset in emit_cached_dirents
2022-10-16Revert "cpumask: fix checking valid cpu range".Tetsuo Handa1-8/+11
This reverts commit 78e5a3399421 ("cpumask: fix checking valid cpu range"). syzbot is hitting WARN_ON_ONCE(cpu >= nr_cpumask_bits) warning at cpu_max_bits_warn() [1], for commit 78e5a3399421 ("cpumask: fix checking valid cpu range") is broken. Obviously that patch hits WARN_ON_ONCE() when e.g. reading /proc/cpuinfo because passing "cpu + 1" instead of "cpu" will trivially hit cpu == nr_cpumask_bits condition. Although syzbot found this problem in linux-next.git on 2022/09/27 [2], this problem was not fixed immediately. As a result, that patch was sent to linux.git before the patch author recognizes this problem, and syzbot started failing to test changes in linux.git since 2022/10/10 [3]. Andrew Jones proposed a fix for x86 and riscv architectures [4]. But [2] and [5] indicate that affected locations are not limited to arch code. More delay before we find and fix affected locations, less tested kernel (and more difficult to bisect and fix) before release. We should have inspected and fixed basically all cpumask users before applying that patch. We should not crash kernels in order to ask existing cpumask users to update their code, even if limited to CONFIG_DEBUG_PER_CPU_MAPS=y case. Link: https://syzkaller.appspot.com/bug?extid=d0fd2bf0dd6da72496dd [1] Link: https://syzkaller.appspot.com/bug?extid=21da700f3c9f0bc40150 [2] Link: https://syzkaller.appspot.com/bug?extid=51a652e2d24d53e75734 [3] Link: https://lkml.kernel.org/r/20221014155845.1986223-1-ajones@ventanamicro.com [4] Link: https://syzkaller.appspot.com/bug?extid=4d46c43d81c3bd155060 [5] Reported-by: Andrew Jones <ajones@ventanamicro.com> Reported-by: syzbot+d0fd2bf0dd6da72496dd@syzkaller.appspotmail.com Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Yury Norov <yury.norov@gmail.com> Cc: Borislav Petkov <bp@alien8.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-10-17lib/Kconfig.debug: Add check for non-constant .{s,u}leb128 support to DWARF5Nathan Chancellor1-2/+7
When building with a RISC-V kernel with DWARF5 debug info using clang and the GNU assembler, several instances of the following error appear: /tmp/vgettimeofday-48aa35.s:2963: Error: non-constant .uleb128 is not supported Dumping the .s file reveals these .uleb128 directives come from .debug_loc and .debug_ranges: .Ldebug_loc0: .byte 4 # DW_LLE_offset_pair .uleb128 .Lfunc_begin0-.Lfunc_begin0 # starting offset .uleb128 .Ltmp1-.Lfunc_begin0 # ending offset .byte 1 # Loc expr size .byte 90 # DW_OP_reg10 .byte 0 # DW_LLE_end_of_list .Ldebug_ranges0: .byte 4 # DW_RLE_offset_pair .uleb128 .Ltmp6-.Lfunc_begin0 # starting offset .uleb128 .Ltmp27-.Lfunc_begin0 # ending offset .byte 4 # DW_RLE_offset_pair .uleb128 .Ltmp28-.Lfunc_begin0 # starting offset .uleb128 .Ltmp30-.Lfunc_begin0 # ending offset .byte 0 # DW_RLE_end_of_list There is an outstanding binutils issue to support a non-constant operand to .sleb128 and .uleb128 in GAS for RISC-V but there does not appear to be any movement on it, due to concerns over how it would work with linker relaxation. To avoid these build errors, prevent DWARF5 from being selected when using clang and an assembler that does not have support for these symbol deltas, which can be easily checked in Kconfig with as-instr plus the small test program from the dwz test suite from the binutils issue. Link: https://sourceware.org/bugzilla/show_bug.cgi?id=27215 Link: https://github.com/ClangBuiltLinux/linux/issues/1719 Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2022-10-17kbuild: fix single directory buildMasahiro Yamada1-0/+2
Commit f110e5a250e3 ("kbuild: refactor single builds of *.ko") was wrong. KBUILD_MODULES _is_ needed for single builds. Otherwise, "make foo/bar/baz/" does not build module objects at all. Fixes: f110e5a250e3 ("kbuild: refactor single builds of *.ko") Reported-by: David Sterba <dsterba@suse.cz> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: David Sterba <dsterba@suse.com>
2022-10-15Merge tag 'slab-for-6.1-rc1-hotfix' of ↵Linus Torvalds2-19/+19
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab Pull slab hotfix from Vlastimil Babka: "A single fix for the common-kmalloc series, for warnings on mips and sparc64 reported by Guenter Roeck" * tag 'slab-for-6.1-rc1-hotfix' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab: mm/slab: use kmalloc_node() for off slab freelist_idx_t array allocation
2022-10-15Merge tag 'for-linus' of https://github.com/openrisc/linuxLinus Torvalds2-9/+9
Pull OpenRISC updates from Stafford Horne: "I have relocated to London so not much work from me while I get settled. Still, OpenRISC picked up two patches in this window: - Fix for kernel page table walking from Jann Horn - MAINTAINER entry cleanup from Palmer Dabbelt" * tag 'for-linus' of https://github.com/openrisc/linux: MAINTAINERS: git://github -> https://github.com for openrisc openrisc: Fix pagewalk usage in arch_dma_{clear, set}_uncached
2022-10-15Merge tag 'pci-v6.1-fixes-1' of ↵Linus Torvalds1-61/+1
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci fix from Bjorn Helgaas: "Revert the attempt to distribute spare resources to unconfigured hotplug bridges at boot time. This fixed some dock hot-add scenarios, but Jonathan Cameron reported that it broke a topology with a multi-function device where one function was a Switch Upstream Port and the other was an Endpoint" * tag 'pci-v6.1-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: Revert "PCI: Distribute available resources for root buses, too"
2022-10-15mm/slab: use kmalloc_node() for off slab freelist_idx_t array allocationHyeonggon Yoo2-19/+19
After commit d6a71648dbc0 ("mm/slab: kmalloc: pass requests larger than order-1 page to page allocator"), SLAB passes large ( > PAGE_SIZE * 2) requests to buddy like SLUB does. SLAB has been using kmalloc caches to allocate freelist_idx_t array for off slab caches. But after the commit, freelist_size can be bigger than KMALLOC_MAX_CACHE_SIZE. Instead of using pointer to kmalloc cache, use kmalloc_node() and only check if the kmalloc cache is off slab during calculate_slab_order(). If freelist_size > KMALLOC_MAX_CACHE_SIZE, no looping condition happens as it allocates freelist_idx_t array directly from buddy. Link: https://lore.kernel.org/all/20221014205818.GA1428667@roeck-us.net/ Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net> Fixes: d6a71648dbc0 ("mm/slab: kmalloc: pass requests larger than order-1 page to page allocator") Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
2022-10-15MAINTAINERS: git://github -> https://github.com for openriscPalmer Dabbelt1-1/+1
Github deprecated the git:// links about a year ago, so let's move to the https:// URLs instead. Reported-by: Conor Dooley <conor.dooley@microchip.com> Link: https://github.blog/2021-09-01-improving-git-protocol-security-github/ Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Stafford Horne <shorne@gmail.com>
2022-10-15smb3: improve SMB3 change notification supportSteve French6-13/+90
Change notification is a commonly supported feature by most servers, but the current ioctl to request notification when a directory is changed does not return the information about what changed (even though it is returned by the server in the SMB3 change notify response), it simply returns when there is a change. This ioctl improves upon CIFS_IOC_NOTIFY by returning the notify information structure which includes the name of the file(s) that changed and why. See MS-SMB2 2.2.35 for details on the individual filter flags and the file_notify_information structure returned. To use this simply pass in the following (with enough space to fit at least one file_notify_information structure) struct __attribute__((__packed__)) smb3_notify { uint32_t completion_filter; bool watch_tree; uint32_t data_len; uint8_t data[]; } __packed; using CIFS_IOC_NOTIFY_INFO 0xc009cf0b or equivalently _IOWR(CIFS_IOCTL_MAGIC, 11, struct smb3_notify_info) The ioctl will block until the server detects a change to that directory or its subdirectories (if watch_tree is set). Acked-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Acked-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-10-15cifs: lease key is uninitialized in two additional functions when smb1Steve French1-2/+2
cifs_open and _cifsFileInfo_put also end up with lease_key uninitialized in smb1 mounts. It is cleaner to set lease key to zero in these places where leases are not supported (smb1 can not return lease keys so the field was uninitialized). Addresses-Coverity: 1514207 ("Uninitialized scalar variable") Addresses-Coverity: 1514331 ("Uninitialized scalar variable") Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-10-15cifs: lease key is uninitialized in smb1 pathsSteve French1-1/+1
It is cleaner to set lease key to zero in the places where leases are not supported (smb1 can not return lease keys so the field was uninitialized). Addresses-Coverity: 1513994 ("Uninitialized scalar variable") Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-10-15smb3: must initialize two ACL struct fields to zeroSteve French1-1/+2
Coverity spotted that we were not initalizing Stbz1 and Stbz2 to zero in create_sd_buf. Addresses-Coverity: 1513848 ("Uninitialized scalar variable") Cc: <stable@vger.kernel.org> Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-10-15cifs: fix double-fault crash during ntlmsspPaulo Alcantara1-7/+9
The crash occurred because we were calling memzero_explicit() on an already freed sess_data::iov[1] (ntlmsspblob) in sess_free_buffer(). Fix this by not calling memzero_explicit() on sess_data::iov[1] as it's already by handled by callers. Fixes: a4e430c8c8ba ("cifs: replace kfree() with kfree_sensitive() for sensitive data") Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de> Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com>
2022-10-15tools arch x86: Sync the msr-index.h copy with the kernel sourcesArnaldo Carvalho de Melo1-0/+18
To pick up the changes in: b8d1d163604bd1e6 ("x86/apic: Don't disable x2APIC if locked") ca5b7c0d9621702e ("perf/x86/amd/lbr: Add LbrExtV2 branch record support") Addressing these tools/perf build warnings: diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h' That makes the beautification scripts to pick some new entries: $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before $ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after $ diff -u before after --- before 2022-10-14 18:06:34.294561729 -0300 +++ after 2022-10-14 18:06:41.285744044 -0300 @@ -264,6 +264,7 @@ [0xc0000102 - x86_64_specific_MSRs_offset] = "KERNEL_GS_BASE", [0xc0000103 - x86_64_specific_MSRs_offset] = "TSC_AUX", [0xc0000104 - x86_64_specific_MSRs_offset] = "AMD64_TSC_RATIO", + [0xc000010e - x86_64_specific_MSRs_offset] = "AMD64_LBR_SELECT", [0xc000010f - x86_64_specific_MSRs_offset] = "AMD_DBG_EXTN_CFG", [0xc0000300 - x86_64_specific_MSRs_offset] = "AMD64_PERF_CNTR_GLOBAL_STATUS", [0xc0000301 - x86_64_specific_MSRs_offset] = "AMD64_PERF_CNTR_GLOBAL_CTL", $ Now one can trace systemwide asking to see backtraces to where that MSR is being read/written, see this example with a previous update: # perf trace -e msr:*_msr/max-stack=32/ --filter="msr>=IA32_U_CET && msr<=IA32_INT_SSP_TAB" ^C# If we use -v (verbose mode) we can see what it does behind the scenes: # perf trace -v -e msr:*_msr/max-stack=32/ --filter="msr>=IA32_U_CET && msr<=IA32_INT_SSP_TAB" Using CPUID AuthenticAMD-25-21-0 0x6a0 0x6a8 New filter for msr:read_msr: (msr>=0x6a0 && msr<=0x6a8) && (common_pid != 597499 && common_pid != 3313) 0x6a0 0x6a8 New filter for msr:write_msr: (msr>=0x6a0 && msr<=0x6a8) && (common_pid != 597499 && common_pid != 3313) mmap size 528384B ^C# Example with a frequent msr: # perf trace -v -e msr:*_msr/max-stack=32/ --filter="msr==IA32_SPEC_CTRL" --max-events 2 Using CPUID AuthenticAMD-25-21-0 0x48 New filter for msr:read_msr: (msr==0x48) && (common_pid != 2612129 && common_pid != 3841) 0x48 New filter for msr:write_msr: (msr==0x48) && (common_pid != 2612129 && common_pid != 3841) mmap size 528384B Looking at the vmlinux_path (8 entries long) symsrc__init: build id mismatch for vmlinux. Using /proc/kcore for kernel data Using /proc/kallsyms for symbols 0.000 Timer/2525383 msr:write_msr(msr: IA32_SPEC_CTRL, val: 6) do_trace_write_msr ([kernel.kallsyms]) do_trace_write_msr ([kernel.kallsyms]) __switch_to_xtra ([kernel.kallsyms]) __switch_to ([kernel.kallsyms]) __schedule ([kernel.kallsyms]) schedule ([kernel.kallsyms]) futex_wait_queue_me ([kernel.kallsyms]) futex_wait ([kernel.kallsyms]) do_futex ([kernel.kallsyms]) __x64_sys_futex ([kernel.kallsyms]) do_syscall_64 ([kernel.kallsyms]) entry_SYSCALL_64_after_hwframe ([kernel.kallsyms]) __futex_abstimed_wait_common64 (/usr/lib64/libpthread-2.33.so) 0.030 :0/0 msr:write_msr(msr: IA32_SPEC_CTRL, val: 2) do_trace_write_msr ([kernel.kallsyms]) do_trace_write_msr ([kernel.kallsyms]) __switch_to_xtra ([kernel.kallsyms]) __switch_to ([kernel.kallsyms]) __schedule ([kernel.kallsyms]) schedule_idle ([kernel.kallsyms]) do_idle ([kernel.kallsyms]) cpu_startup_entry ([kernel.kallsyms]) secondary_startup_64_no_verify ([kernel.kallsyms]) # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Daniel Sneddon <daniel.sneddon@linux.intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sandipan Das <sandipan.das@amd.com> Link: https://lore.kernel.org/lkml/Y0nQkz2TUJxwfXJd@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-10-15perf auxtrace arm64: Add support for parsing HiSilicon PCIe Trace packetQi Liu7-0/+396
Add support for using 'perf report --dump-raw-trace' to parse PTT packet. Example usage: Output will contain raw PTT data and its textual representation, such as (8DW format): 0 0 0x5810 [0x30]: PERF_RECORD_AUXTRACE size: 0x400000 offset: 0 ref: 0xa5d50c725 idx: 0 tid: -1 cpu: 0 . . ... HISI PTT data: size 4194304 bytes . 00000000: 00 00 00 00 Prefix . 00000004: 08 20 00 60 Header DW0 . 00000008: ff 02 00 01 Header DW1 . 0000000c: 20 08 00 00 Header DW2 . 00000010: 10 e7 44 ab Header DW3 . 00000014: 2a a8 1e 01 Time . 00000020: 00 00 00 00 Prefix . 00000024: 01 00 00 60 Header DW0 . 00000028: 0f 1e 00 01 Header DW1 . 0000002c: 04 00 00 00 Header DW2 . 00000030: 40 00 81 02 Header DW3 . 00000034: ee 02 00 00 Time .... This patch only add basic parsing support according to the definition of the PTT packet described in Documentation/trace/hisi-ptt.rst. And the fields of each packet can be further decoded following the PCIe Spec's definition of TLP packet. Signed-off-by: Qi Liu <liuqi115@huawei.com> Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Bjorn Helgaas <helgaas@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: John Garry <john.garry@huawei.com> Cc: Jonathan Cameron <jonathan.cameron@huawei.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Liu <liuqi6124@gmail.com> Cc: Shameerali Kolothum Thodi <shameerali.kolothum.thodi@huawei.com> Cc: Shaokun Zhang <zhangshaokun@hisilicon.com> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Zeng Prime <prime.zeng@huawei.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-pci@vger.kernel.org Cc: linuxarm@huawei.com Link: https://lore.kernel.org/r/20220927081400.14364-4-yangyicong@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-10-15perf auxtrace arm64: Add support for HiSilicon PCIe Tune and Trace device driverQi Liu7-1/+273
HiSilicon PCIe tune and trace device (PTT) could dynamically tune the PCIe link's events, and trace the TLP headers). This patch add support for PTT device in perf tool, so users could use 'perf record' to get TLP headers trace data. Reviewed-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Qi Liu <liuqi115@huawei.com> Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> Acked-by: John Garry <john.garry@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Bjorn Helgaas <helgaas@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Jonathan Cameron <jonathan.cameron@huawei.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Liu <liuqi6124@gmail.com> Cc: Shameerali Kolothum Thodi <shameerali.kolothum.thodi@huawei.com> Cc: Shaokun Zhang <zhangshaokun@hisilicon.com> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Zeng Prime <prime.zeng@huawei.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-pci@vger.kernel.org Cc: linuxarm@huawei.com Link: https://lore.kernel.org/r/20220927081400.14364-3-yangyicong@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-10-15perf auxtrace arm: Refactor event list iteration in auxtrace_record__init()Qi Liu1-19/+34
Add find_pmu_for_event() and use to simplify logic in auxtrace_record_init(). find_pmu_for_event() will be reused in subsequent patches. Reviewed-by: John Garry <john.garry@huawei.com> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Qi Liu <liuqi115@huawei.com> Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Bjorn Helgaas <helgaas@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Clark <james.clark@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Liu <liuqi6124@gmail.com> Cc: Shameerali Kolothum Thodi <shameerali.kolothum.thodi@huawei.com> Cc: Shaokun Zhang <zhangshaokun@hisilicon.com> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Zeng Prime <prime.zeng@huawei.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-pci@vger.kernel.org Cc: linuxarm@huawei.com Link: https://lore.kernel.org/r/20220927081400.14364-2-yangyicong@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-10-15perf tests stat+json_output: Include sanity check for topologyAthira Rajeev1-4/+39
Testcase stat+json_output.sh fails in powerpc: 86: perf stat JSON output linter : FAILED! The testcase "stat+json_output.sh" verifies perf stat JSON output. The test covers aggregation modes like per-socket, per-core, per-die, -A (no_aggr mode) along with few other tests. It counts expected fields for various commands. For example say -A (i.e, AGGR_NONE mode), expects 7 fields in the output having "CPU" as first field. Same way, for per-socket, it expects the first field in result to point to socket id. The testcases compares the result with expected count. The values for socket, die, core and cpu are fetched from topology directory: /sys/devices/system/cpu/cpu*/topology. For example, socket value is fetched from "physical_package_id" file of topology directory. (cpu__get_topology_int() in util/cpumap.c) If a platform fails to fetch the topology information, values will be set to -1. For example, incase of pSeries platform of powerpc, value for "physical_package_id" is restricted and not exposed. So, -1 will be assigned. Perf code has a checks for valid cpu id in "aggr_printout" (stat-display.c), which displays the fields. So, in cases where topology values not exposed, first field of the output displaying will be empty. This cause the testcase to fail, as it counts number of fields in the output. Incase of -A (AGGR_NONE mode,), testcase expects 7 fields in the output, becos of -1 value obtained from topology files for some, only 6 fields are printed. Hence a testcase failure reported due to mismatch in number of fields in the output. Patch here adds a sanity check in the testcase for topology. Check will help to skip the test if -1 value found. Fixes: 0c343af2a2f82844 ("perf test: JSON format checking") Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com> Suggested-by: Ian Rogers <irogers@google.com> Suggested-by: James Clark <james.clark@arm.com> Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Cc: Claire Jensen <cjense@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nageswara R Sastry <rnsastry@linux.ibm.com> Link: https://lore.kernel.org/r/20221006155149.67205-2-atrajeev@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-10-15perf tests stat+csv_output: Include sanity check for topologyAthira Rajeev1-4/+39
Testcase stat+csv_output.sh fails in powerpc: 84: perf stat CSV output linter: FAILED! The testcase "stat+csv_output.sh" verifies perf stat CSV output. The test covers aggregation modes like per-socket, per-core, per-die, -A (no_aggr mode) along with few other tests. It counts expected fields for various commands. For example say -A (i.e, AGGR_NONE mode), expects 7 fields in the output having "CPU" as first field. Same way, for per-socket, it expects the first field in result to point to socket id. The testcases compares the result with expected count. The values for socket, die, core and cpu are fetched from topology directory: /sys/devices/system/cpu/cpu*/topology. For example, socket value is fetched from "physical_package_id" file of topology directory. (cpu__get_topology_int() in util/cpumap.c) If a platform fails to fetch the topology information, values will be set to -1. For example, incase of pSeries platform of powerpc, value for "physical_package_id" is restricted and not exposed. So, -1 will be assigned. Perf code has a checks for valid cpu id in "aggr_printout" (stat-display.c), which displays the fields. So, in cases where topology values not exposed, first field of the output displaying will be empty. This cause the testcase to fail, as it counts number of fields in the output. Incase of -A (AGGR_NONE mode,), testcase expects 7 fields in the output, becos of -1 value obtained from topology files for some, only 6 fields are printed. Hence a testcase failure reported due to mismatch in number of fields in the output. Patch here adds a sanity check in the testcase for topology. Check will help to skip the test if -1 value found. Fixes: 7473ee56dbc91c98 ("perf test: Add checking for perf stat CSV output.") Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com> Suggested-by: Ian Rogers <irogers@google.com> Suggested-by: James Clark <james.clark@arm.com> Signed-off-by: Athira Jajeev <atrajeev@linux.vnet.ibm.com> Cc: Claire Jensen <cjense@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: linuxppc-dev@lists.ozlabs.org Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Nageswara R Sastry <rnsastry@linux.ibm.com> Link: https://lore.kernel.org/r/20221006155149.67205-1-atrajeev@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-10-15perf intel-pt: Fix system_wide dummy event for hybridAdrian Hunter1-1/+1
User space tasks can migrate between CPUs, so when tracing selected CPUs, system-wide sideband is still needed, however evlist->core.has_user_cpus is not set in the hybrid case, so check the target cpu_list instead. Fixes: 7d189cadbeebc778 ("perf intel-pt: Track sideband system-wide when needed") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20221012082259.22394-3-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-10-15perf intel-pt: Fix segfault in intel_pt_print_info() with uClibcAdrian Hunter1-2/+7
uClibc segfaulted because NULL was passed as the format to fprintf(). That happened because one of the format strings was missing and intel_pt_print_info() didn't check that before calling fprintf(). Add the missing format string, and check format is not NULL before calling fprintf(). Fixes: 11fa7cb86b56d361 ("perf tools: Pass Intel PT information for decoding MTC and CYC") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20221012082259.22394-2-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-10-15perf test: Fix attr tests for PERF_FORMAT_LOSTJames Clark6-11/+11
Since PERF_FORMAT_LOST was added, the default read format has that bit set, so add it to the tests. Keep the old value as well so that the test still passes on older kernels. This fixes the following failure: expected read_format=0|4, got 20 FAILED './tests/attr/test-record-C0' - match failure Fixes: 85b425f31c8866e0 ("perf record: Set PERF_FORMAT_LOST by default") Signed-off-by: James Clark <james.clark@arm.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20221012094633.21669-2-james.clark@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-10-15perf test: test_intel_pt.sh: Add 9 testsAmmy Yi1-1/+194
Add tests: Test with MTC and TSC disabled Test with branches disabled Test with/without CYC Test recording with sample mode Test with kernel trace Test virtual LBR Test power events Test with TNT packets disabled Test with event_trace These tests mostly check that perf record works with the corresponding Intel PT config terms, sometimes also checking that certain packets do or do not appear in the resulting trace as appropriate. The "Test virtual LBR" is slightly trickier, using a Python script to check that branch stacks are actually synthesized. Signed-off-by: Ammy Yi <ammy.yi@intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20221014170905.64069-8-adrian.hunter@intel.com Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-10-15perf inject: Fix GEN_ELF_TEXT_OFFSET for jitAdrian Hunter1-1/+3
When a program header was added, it moved the text section but GEN_ELF_TEXT_OFFSET was not updated. Fix by adding the program header size and aligning. Fixes: babd04386b1df8c3 ("perf jit: Include program header in ELF files") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Lieven Hey <lieven.hey@kdab.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20221014170905.64069-7-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-10-15perf test: test_intel_pt.sh: Add jitdump testAdrian Hunter1-0/+162
Add a test for decoding self-modifying code using a jitdump file. The test creates a workload that uses self-modifying code and generates its own jitdump file. The result is processed with perf inject --jit and checked for decoding errors. Note the test will fail without patch "perf inject: Fix GEN_ELF_TEXT_OFFSET for jit" applied. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20221014170905.64069-6-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-10-15perf test: test_intel_pt.sh: Tidy some alignmentAdrian Hunter1-3/+3
Tidy alignment of test function lines to make them more readable. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20221014170905.64069-5-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-10-15perf test: test_intel_pt.sh: Print a message when skipping kernel tracingAdrian Hunter1-1/+8
Messages display with the perf test -v option. Add a message to show when skipping a test because the user cannot do kernel tracing. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20221014170905.64069-4-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-10-15perf test: test_intel_pt.sh: Tidy some perf record optionsAdrian Hunter1-4/+12
When not decoding, the options "-B -N --no-bpf-event" speed up perf record. Make a common function for them. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20221014170905.64069-3-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2022-10-15perf test: test_intel_pt.sh: Fix return checking againAdrian Hunter1-4/+3
count_result() does not always reset ret=0 which means the value can spill into the next test result. Fix by explicitly setting it to zero between tests. Committer testing: # perf test "Miscellaneous Intel PT testing" 110: Miscellaneous Intel PT testing : Ok # Tested as well with: # perf test -v "Miscellaneous Intel PT testing" Fixes: fd9b45e39cfaf885 ("perf test: test_intel_pt.sh: Fix return checking") Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20221014170905.64069-2-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-04 02:59:45 +0000