summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2008-09-08netns bridge: cleanup bridges during netns stopAlexey Dobriyan3-9/+19
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: Stephen Hemminger <shemming@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-08netns bridge: allow bridges in netns!Alexey Dobriyan7-34/+25
Bridge as netdevice doesn't cross netns boundaries. Bridge ports and bridge itself live in same netns. Notifiers are fixed. netns propagated from userspace socket for setup and teardown. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: Stephen Hemminger <shemming@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-08warn: Turn the netdev timeout WARN_ON() into a WARN()Arjan van de Ven2-2/+11
this patch turns the netdev timeout WARN_ON_ONCE() into a WARN_ONCE(), so that the device and driver names are inside the warning message. This helps automated tools like kerneloops.org to collect the data and do statistics, as well as making it more likely that humans cut-n-paste the important message as part of a bugreport. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-08Merge branch 'master' of ↵David S. Miller78-6424/+7632
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2008-09-08net: Enable TSO if supported by at least one deviceHerbert Xu1-0/+6
As it stands users of netdev_compute_features (e.g., bridges/bonding) will only enable TSO if all consituent devices support it. This is unnecessarily pessimistic since even on devices that do not support hardware TSO and SG, emulated TSO still performs to a par with TSO off. This patch enables TSO if at least on constituent device supports it in hardware. The direct beneficiaries will be virtualisation that uses bridging since this means that TSO will always be enabled for communication from the host to the guests. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-09-08iwlwifi: enable packet injection for iwlagnStefanik Gábor3-14/+10
Handle station IDs of transmitted packets when in monitor mode, and remove the various anti-injection checks from the iwl4965 driver. This makes injection work on iwl4965 and iwl5000. Tested on both cards. Note: To inject management frames with encryption, HW crypto support must be disabled using the "swcrypto=1" modparam (or "swcrypto50=1" for iwl5000). Otherwise most management frames won't be transmitted. Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-08iwl3945: enable active scanning on active channelsAbhijeet Kolekar1-28/+26
This patch enables active scanning on active channels. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-08iwlwifi: remove bad language from the commentsTomas Winkler1-2/+1
This patch removes bad language in the comments in iwl-agn-rs.c. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-08iwlwifi: take a fresh set of supported rates at each cycleEmmanuel Grumbach1-0/+1
This patch fixes regression in iwlwifi IBSS rate scaling caused by the patch named "mac80211: eliminate IBSS warning in rate_lowest_index()" by Vladimir Koutny <vlado@work.ksp.sk>. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-08iwlwifi: fix host command header according the HW specTomas Winkler3-14/+16
This patch aligns definition of host command with the spec. The inaccuracies weren't critical though. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-08iwlwifi: allow association on radar channel in power saveEmmanuel Grumbach4-7/+61
This patch disables power save upon association and enables it back after association. This allows to associate to AP on a radar channel if power save is enabled. Radar and passive channels are not allowed for TX (required for association) unless RX is received but PS may close the radio and no RX will be received effectively failing association. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-08iwlwifi: cleanup PCI register handlingTomas Winkler6-34/+31
This patch cleans up pci registers handling. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-08iwlwifi: fix strict_strtoul error checkingEmmanuel Grumbach1-3/+3
This patch fixes handling of strcit_strtoul return value "0 == sucess". Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-08iwlwifi: generic init calibrations frameworkTomas Winkler6-81/+90
This patch allows variable number of init calibrations and allows addition new HW. This patch also fixes critical bug. Only last calibration result was applied. On reception of one calibration result all the calibration was freed. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-08iwlwifi: remove rfkill warning from iwl-ioTomas Winkler2-36/+0
The patch removes the warning since registers might be accessed also during rfkill. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-08iwlwifi: replace readl and writel with io/read/write/32Tomas Winkler2-5/+5
This patch replaces readl and writel with more cross platform ioread32 and iowrite32. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-08iwlwifi: use strict_strtoul instead of simple_strtoulTomas Winkler1-17/+32
This patch makes use of strict_srtoul in sysfs code. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-08iwl3945: avoid redundant iwl3945_get_active_dwell_timeAbhijeet Kolekar1-4/+3
iwl3945_get_active_dwell_time is called twice within the same context. The patch removes one instance. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-08iwl3945: removed bg_post_associate workAbhijeet Kolekar2-18/+1
This patch removes bg_post_associate work. A direct call iwl3945_post_associate is made to avoid the waiting by userspace programs. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-08iwl3945: replace association and beacon hooks with bss_info_changed cbAbhijeet Kolekar1-81/+0
Let mac80211 and bss_info_changed callback handle the association and beacon changes. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-08iwl3945: fix unbalanced mutexAbhijeet Kolekar1-3/+2
The patch removes unlocking of mutex from post_associate. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-08iwlwifi: align set channel with mac80211Tomas Winkler3-10/+7
This patch makes use of mac80211 defaults for channel and band. Older code that uses G band channel 6 was removed. This patch also changes iwl_set_rxon_channel signature. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-08iwlwifi: allow consecutive scans in unassociated stateRon Rindjunsky1-1/+3
This patch allows consecutive scans requests when driver is in unassociated state. Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: Esti Kummer <ester.kummer@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-08iwlwifi: remove obsolete 4965 forward declarationsRon Rindjunsky1-6/+0
This patch removes unused forward declarations functions. Signed-off-by: Ron Rindjunsky <ron.rindjunsky@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-08iwlwifi: clean up hw scan handlerTomas Winkler1-19/+16
This patch cleans up iwl_mac_hw_scan handler. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-08iwlwifi : Added bss_info_changed callback to 3945Abhijeet Kolekar1-6/+68
Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-08mac80211: add missing kernel-docRandy Dunlap1-0/+1
Fix mac80211 kernel-doc missing struct field: Warning(linux-2.6.27-rc1-git2//net/mac80211/sta_info.h:329): No description found for parameter 'tid_seq[IEEE80211_QOS_CTL_TID_MASK + 1]' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-08mac80211: Fix rate scale initialization in IBSSEmmanuel Grumbach2-30/+64
This patch address some IBSS rate issues introduced or not covered by "mac80211: eliminate IBSS warning in rate_lowest_index()" and "cfg80211 API for channels/bitrates, mac80211 and driver conversion". This patch: 1. Moves addition of IBSS station from prepare_for_handlers to ieee80211_rx_bss_info when triggered from beacon eliminating bogus supported rates. 2. Initialize properly supported rates also in IBSS merging 3. Ensure that mandatory rates are always added into supported rates. This is needed in case when station addition is triggered from non beacon/probe packet. Some management frames need to be sent 4. Remove initialization of supported rates from self rates. This path was dead code after 6bc37c06bc4 and in general incorrect. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Cc: Vladimir Koutny <vlado@work.ksp.sk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-08mac80211: Fix low bit rate in IBSSTomas Winkler1-1/+1
This patch fixes regression in iwlwifi IBSS rate scaling caused by patch: commit 6bc37c06bc424bcf3f944e6a79e2d5bb537e02ed Author: Vladimir Koutny <vlado@work.ksp.sk> Date: Fri Jun 13 16:50:44 2008 +0200 mac80211: eliminate IBSS warning in rate_lowest_index() An IBSS station is added in prepare_for_handlers where the rate scaling was initialized only with single rate matching the received packet. The correct rate scale information should be updated only in ieee80211_rx_bss_info function where beacon is parsed. Because of coding error the rate info was left untouched. If a beacon has triggered the connection the rate remined 1Mbps. This patch fixes this coding error Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Cc: Vladimir Koutny <vlado@work.ksp.sk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-08p54: better firmware supportChristian Lamparter3-48/+103
This patch hopefully contains all necessary changes to support firmwares for all devices up to atleast 2.13.3.0. (or: LowerMAC Protocol Rev: 5.5 ) And this is a big win, since: * newer firmwares are more stable and reliable than the old ones. * no problems anymore with packages > 1399 octets (without lowering the MTU). * monitor mode finally works on USB for more than just a few seconds. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-08p54: set_filter refactoringChristian Lamparter3-29/+28
p54_set_filter has a way too many unnecessary "magic" parameters and values. This patch axes all superfluous parameters and gives most of the magic values appropriate names. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-08b43: Replace hardcoded Analog switchMichael Buesch1-1/+2
Replace a hardcoded Analog switch (which breaks on N-PHY) by a call to the switch_analog PHY operation. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-08b43: Move Analog switching into phy codeMichael Buesch7-20/+30
This moves the Analog switching code into the PHY files. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-05p54usb: support LM87 firmwaresChristian Lamparter5-20/+73
This patch adds the necessary changes to support LM87 firmwares. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-05ath9k: uses/needs led_classdev_[un]registerRandy Dunlap1-0/+3
ath9k uses LED classdev functions, so it needs to either select or depend on them. This patch uses the same selects that ath5k uses... drivers/built-in.o: In function `ath_unregister_led': main.c:(.text+0x138c1d): undefined reference to `led_classdev_unregister' drivers/built-in.o: In function `ath_register_led': main.c:(.text+0x139c16): undefined reference to `led_classdev_register' make[1]: *** [.tmp_vmlinux1] Error 1 Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> cc: Jouni Malinen <jmalinen@atheros.com> Acked-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-05b43: Split PHY alloc and initMichael Buesch11-109/+178
This splits the PHY allocation from the PHY init. This is needed in order to properly support Analog handling. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-05p54: move eeprom code into common libraryChristian Lamparter4-235/+137
Both p54pci and p54usb uses a good chunk of device specific code to get the data from the device's eeprom into the drivers memory. So, this patch reduces the code size and will it make life easier if someone wants to implement ethtool eeprom dumping features. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-05p54: enhance firmware parser to reduce memory wasteChristian Lamparter5-27/+69
This patch greatly reduces one of biggest memory waste in the driver. The firmware headers provides the right values for extra head-/tailroom and mtu size which are usually much lower than the old hardcoded ones. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-05p54pci: increase ring buffer index counter when skippingChristian Lamparter1-2/+4
I'm afraid, I forgot to add the following lines to 7262d59366 ("p54pci: rx tasklet refactoring"). These changes are necessary to ensure loop termination. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-05toshiba_acpi: Add support for bluetooth toggling through rfkill (v8)philipl@overt.org2-8/+256
There's been a patch floating around for toshiba_acpi that exports an ad-hoc /proc interface to toggle the bluetooth adapter in a large number of Toshiba laptops. I'm not sure if it's still relevant for the latest models, but it is still required for older models such as my Tecra M3. This change pulls in the low level Toshiba-specific code from the old patch and sets up an rfkill device and a polled input device to track the state of the hardware kill-switch. Signed-off-by: Philip Langdale <philipl@overt.org> Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-05b43: Add LP-PHY radio register definitionsMichael Buesch1-0/+526
This adds definitions for the LP-PHY radios. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-05b43: Add LP-PHY read/write phyopsMichael Buesch1-6/+17
This adds read/write phyops for the LP-PHY and LP-PHY radios. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-05b43: Add LP-PHY templateMichael Buesch6-1/+176
This adds template code for the LP-PHY. No actual functionality is implemented. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-05b43: Move code from nphy.* to phy_n.*Michael Buesch6-5/+5
Sourcecode files for PHY code are named by phy_XXX.{c,h} where XXX is the PHY type. Move the N-PHY code to match the other files. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-05b43: Move remaining code from phy.c to phy_a.cMichael Buesch4-490/+94
This moves the remaining code from phy.c to phy_a.c phy.c is removed. No functional change. Just moving code and removing dead code. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-05cfg80211: keep track of supported interface modesLuis R. Rodriguez17-3/+95
It is obviously good for userspace to know up front which interface modes a given piece of hardware might support (even if adding such an interface might fail later because of concurrency issues), so let's make cfg80211 aware of that. For good measure, disallow adding interfaces in all other modes so drivers don't forget to announce support for one mode when they add it. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Stephen Blackheath <tramp.enshrine.stephen@blacksapphire.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-05ath5k: HW code cleanupNick Kossifidis19-5042/+5435
* No code changes... * Split hw.c to multiple files for better maintenance and add some documentation on each file code is going to grow soon (eeprom.c for example is going to get much stuff currently developed on ath_info) so it's better this way. * Rename following functions to maintain naming scheme: ah_setup_xtx_desc -> ah_setup_mrr_tx_desc (Because xtx doesn't say much, it's actually a multi-rate-retry tx descriptor) ath5k_hw_put_tx/rx_buf - > ath5k_hw_set_tx/rxdp ath5k_hw_get_tx/rx_buf -> ath5k_hw_get_tx/rxdp (We don't put any "buf" we set descriptor pointers on hw) ath5k_hw_tx_start -> ath5k_hw_start_tx_dma ath5k_hw_start_rx -> ath5k_hw_start_rx_dma ath5k_hw_stop_pcu_recv -> ath5k_hw_stop_rx_pcu (It's easier this way to identify them, we also have ath5k_hw_start_rx_pcu which completes the set) ath5k_hw_set_intr -> ath5k_hw_set_imr (As in get_isr we set imr here, not "intr") * Move ath5k_hw_setup_rx_desc on ah->ah_setup_rx_desc so we can include support for different rx descriptors in the future * Further cleanups so that checkpatch doesn't complain (only some > 80 col warnings for eeprom.h and reg.h as usual due to comments) Tested on 5211 and 5213 cards and works ok. Changes-licensed-under: ISC Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Acked-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-05b43: Don't use memcpy for overlapping areasMichael Buesch1-3/+4
It is valid to pass &gphy->rfatt and &gphy->bbatt as rfatt and bbatt pointer arguments to the function. So we have to use memmove for the possibly overlapping memory areas. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-09-03s2io: reindented misleading for loopIlpo Järvinen1-2/+2
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-03[netdrvr] removed unused #include <version.h>Huang Weiyi3-3/+0
The drivers below do not use LINUX_VERSION_CODE nor KERNEL_VERSION. drivers/net/myri10ge/myri10ge.c drivers/net/netxen/netxen_nic_ethtool.c drivers/net/tokenring/lanstreamer.c This patch removes the said #include <version.h>. Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-13 00:40:54 +0000