summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2016-09-20xtensa: xtfpga: group platform_* functions togetherMax Filippov1-24/+22
Group platform_* functions together and turn two separate #ifdef/#ifndef blocks into single #ifdef/#else. No functional changes. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2016-09-20xtensa: rearrange CCOUNT calibrationMax Filippov4-44/+41
DT-enabled kernel should have a CPU node connected to a clock. This clock is the CCOUNT clock. Use old platform_calibrate_ccount call as a fallback when CPU node cannot be found or has no clock and in non-DT-enabled configurations. Drop no longer needed code that updates CPU clock-frequency property in the DT; drop DT-related code from the platform_calibrate_ccount too. Move of_clk_init to the top of time_init, so that clocks are initialized before CCOUNT calibration is attempted. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2016-09-20xtensa: xtfpga: use clock provider, don't update DTMax Filippov2-9/+35
Instead of querying hardcoded FPGA frequency register and then updating clock-frequency property in specificly named DT nodes in machine setup code register a clock provider that returns fixed-rate clock, configured by register specified in DT. This way we have less magic/hardcoded names and use more existing common clock framework code. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Tested-by: Guenter Roeck <linux@roeck-us.net>
2016-09-19xtensa: Tweak xuartps UART driver Rx watermark for Cadence CSP config.Scott Telford1-1/+1
Add module parameter xilinx_uartps.rx_trigger_level=32 to command line options for CSP to set Rx watermark for xuartps driver lower than the default value, to avoid UART overruns at 115200 bps. Signed-off-by: Scott Telford <stelford@cadence.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2016-09-11xtensa: initialize MMU before jumping to reset vectorMax Filippov1-0/+108
When reset is simulated MMU need to be brought into its initial state, because that's what bootloaders/OS kernels assume. This is especially important for MMUv3 because TLB state when the kernel is running is significatly different from its reset state. With this change it is possible to boot linux and get back to U-Boot repeatedly. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2016-09-11xtensa: fix icountlevel setting in cpu_resetMax Filippov1-1/+1
icountlevel SR value specifies lowest intlevel that does not do instruction counting, so to disable instruction counting completely it must be set to 0, not to 15. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2016-09-11xtensa: extract common CPU reset code into separate functionMax Filippov5-60/+32
platform_restart implementatations do the same thing to reset CPU. Don't duplicate that code, move it to a function and call it from platform_restart. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2016-09-09xtensa: Added Cadence CSP kernel configuration for XtensaScott Telford5-0/+1106
Added defconfig, device tree and Xtensa variant header files for the Cadence Configurable System Platform "xt_lnx" processor configuration. Signed-off-by: Scott Telford <stelford@cadence.com> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2016-09-09xtensa: fix default kernel load addressMax Filippov1-2/+4
Make default kernel load address 0xd0003000 for MMUv2 cores and 0x60003000 for noMMU cores. Don't initialize MMU inside vmlinux for predefined MMUv2 cores (it's noop anyway). This fixes the following defconfig build error: arch/xtensa/kernel/built-in.o: In function `fast_alloca': (.text+0x99a): dangerous relocation: j: cannot encode: _WindowUnderflow12 arch/xtensa/kernel/built-in.o: In function `fast_alloca': (.text+0x99d): dangerous relocation: j: cannot encode: _WindowUnderflow8 arch/xtensa/kernel/built-in.o: In function `fast_alloca': (.text+0x9a0): dangerous relocation: j: cannot encode: _WindowUnderflow4 arch/xtensa/kernel/built-in.o: In function `window_overflow_restore_a0_fixup': (.text+0x23a3): dangerous relocation: j: cannot encode: (.DoubleExceptionVector.text+0x104) arch/xtensa/kernel/built-in.o: In function `window_overflow_restore_a0_fixup': (.text+0x23c1): dangerous relocation: j: cannot encode: (.DoubleExceptionVector.text+0x104) arch/xtensa/kernel/built-in.o: In function `window_overflow_restore_a0_fixup': (.text+0x23dd): dangerous relocation: j: cannot encode: (.DoubleExceptionVector.text+0x104) With this change all xtensa defconfigs build correctly. Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2016-08-03Merge tag 'xtensa-for-next-20160731' of ↵Chris Zankel23-455/+449
git://github.com/jcmvbkbc/linux-xtensa into for_next Xtensa improvements for 4.8: - add new kernel memory layouts for MMUv3 cores: with 256MB and 512MB KSEG size, starting at physical address other than 0; - make kernel load address configurable; - clean up kernel memory layout macros; - drop sysmem early allocator and switch to memblock; - enable kmemleak and memory reservation from the device tree; - wire up new syscalls: userfaultfd, membarrier, mlock2, copy_file_range, preadv2 and pwritev2.
2016-07-31xtensa: wire up new syscallsMax Filippov1-1/+14
Wire up userfaultfd, membarrier, mlock2, copy_file_range, preadv2, pwritev2 Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2016-07-24Linux 4.7v4.7Linus Torvalds1-1/+1
2016-07-24xtensa: support reserved-memory DT nodeMax Filippov2-0/+3
This allows reserving regions of physical memory from the device tree. See Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt for more details. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2016-07-24xtensa: drop sysmem and switch to memblockMax Filippov4-292/+40
Memblock is the standard kernel boot-time memory tracker/allocator. Use it instead of the custom sysmem allocator. This allows using kmemleak, CMA and device tree memory reservation. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2016-07-24xtensa: minimize use of PLATFORM_DEFAULT_MEM_{ADDR,SIZE}Max Filippov4-30/+12
Now that the kernel load address and KSEG physical base address have their own Kconfig symbols PLATFORM_DEFAULT_MEM seems redundant. It makes little sense to use it in MMU configurations instead of KSEG_PADDR. In noMMU configurations there's no explicit KSEG, so it's still useful for the early cache initialization and definition of ARCH_PFN_OFFSET, which affects mem_map size. - limit it to noMMU; MMU variants have XCHAL_KSEG_PADDR and XCHAL_KSEG_SIZE; - don't use it to define TASK_SIZE or MAX_LOW_PFN: first doesn't make any difference in noMMU, second is meaningless as there's no high memory; - don't add default physical memory region: memory layout should come from the DT, bootloader tags, or memmap= command line parameter. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2016-07-24xtensa: cleanup MMU setup and kernel layout macrosMax Filippov12-105/+98
Make kernel load address explicit, independent of the selected MMU configuration and configurable from Kconfig. Do not restrict it to the first 512MB of the physical address space. Cleanup kernel memory layout macros: - rename VECBASE_RESET_VADDR to VECBASE_VADDR, XC_VADDR to VECTOR_VADDR; - drop VIRTUAL_MEMORY_ADDRESS and LOAD_MEMORY_ADDRESS; - introduce PHYS_OFFSET and use it in __va and __pa definitions; - synchronize MMU/noMMU vectors, drop unused NMI vector; - replace hardcoded vectors offset of 0x3000 with Kconfig symbol. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2016-07-24xtensa: add alternative kernel memory layoutsMax Filippov9-10/+249
MMUv3 is able to support low memory bigger than 128MB. Implement 256MB and 512MB KSEG layouts: - add Kconfig selector for KSEG layout; - add KSEG base address, size and alignment definitions to arch/xtensa/include/asm/kmem_layout.h; - use new definitions in TLB initialization; - add build time memory map consistency checks. See Documentation/xtensa/mmu.txt for the details of new memory layouts. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2016-07-24xtensa: move kernel mapping addresses into kmem_layout.hMax Filippov5-15/+34
Create a header dedicated to memory layout definitions. Include it from places where these definitions are needed. Express vmalloc area address, VIRTUAL_MEMORY_ADDRESS and KERNELOFFSET through KSEG address. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2016-07-24xtensa: fix __ffs result typeMax Filippov1-1/+1
Make __ffs result type unsigned long to match generic asm implementation. This fixes the following build warning: mm/nobootmem.c: In function '__free_pages_memory': include/linux/kernel.h:742:17: warning: comparison of distinct pointer types lacks a cast (void) (&_min1 == &_min2); \ ^ mm/nobootmem.c:100:11: note: in expansion of macro 'min' order = min(MAX_ORDER - 1UL, __ffs(start)); Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2016-07-24Merge tag 'ceph-for-4.7-rc8' of git://github.com/ceph/ceph-clientLinus Torvalds1-43/+113
Pull ceph fix from Ilya Dryomov: "A fix for a long-standing bug in the incremental osdmap handling code that caused misdirected requests, tagged for stable" The tag is signed with a brand new key - Sage is on vacation and I didn't anticipate this" * tag 'ceph-for-4.7-rc8' of git://github.com/ceph/ceph-client: libceph: apply new_state before new_up_client on incrementals
2016-07-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds64-320/+850
Pull networking fixes from David Miller: 1) Fix memory leak in nftables, from Liping Zhang. 2) Need to check result of vlan_insert_tag() in batman-adv otherwise we risk NULL skb derefs, from Sven Eckelmann. 3) Check for dev_alloc_skb() failures in cfg80211, from Gregory Greenman. 4) Handle properly when we have ppp_unregister_channel() happening in parallel with ppp_connect_channel(), from WANG Cong. 5) Fix DCCP deadlock, from Eric Dumazet. 6) Bail out properly in UDP if sk_filter() truncates the packet to be smaller than even the space that the protocol headers need. From Michal Kubecek. 7) Similarly for rose, dccp, and sctp, from Willem de Bruijn. 8) Make TCP challenge ACKs less predictable, from Eric Dumazet. 9) Fix infinite loop in bgmac_dma_tx_add() from Florian Fainelli. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (65 commits) packet: propagate sock_cmsg_send() error net/mlx5e: Fix del vxlan port command buffer memset packet: fix second argument of sock_tx_timestamp() net: switchdev: change ageing_time type to clock_t Update maintainer for EHEA driver. net/mlx4_en: Add resilience in low memory systems net/mlx4_en: Move filters cleanup to a proper location sctp: load transport header after sk_filter net/sched/sch_htb: clamp xstats tokens to fit into 32-bit int net: cavium: liquidio: Avoid dma_unmap_single on uninitialized ndata net: nb8800: Fix SKB leak in nb8800_receive() et131x: Fix logical vs bitwise check in et131x_tx_timeout() vlan: use a valid default mtu value for vlan over macsec net: bgmac: Fix infinite loop in bgmac_dma_tx_add() mlxsw: spectrum: Prevent invalid ingress buffer mapping mlxsw: spectrum: Prevent overwrite of DCB capability fields mlxsw: spectrum: Don't emit errors when PFC is disabled mlxsw: spectrum: Indicate support for autonegotiation mlxsw: spectrum: Force link training according to admin state r8152: add MODULE_VERSION ...
2016-07-23Merge branch 'overlayfs-linus' of ↵Linus Torvalds3-32/+29
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs Pull overlayfs fixes from Miklos Szeredi: "This contains a fix for a potential crash/corruption issue and another where the suid/sgid bits weren't cleared on write" * 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: ovl: verify upper dentry in ovl_remove_and_whiteout() ovl: Copy up underlying inode's ->i_mode to overlay inode ovl: handle ATTR_KILL*
2016-07-23Merge branch 'akpm' (patches from Andrew)Linus Torvalds7-27/+92
Merge misc fixes from Andrew Morton: "Five fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: pps: do not crash when failed to register tools/vm/slabinfo: fix an unintentional printf testing/radix-tree: fix a macro expansion bug radix-tree: fix radix_tree_iter_retry() for tagged iterators. mm: memcontrol: fix cgroup creation failure after many small jobs
2016-07-23Merge tag 'drm-fixes-for-v4.7-rc8-intel-kbl' of ↵Linus Torvalds10-61/+295
git://people.freedesktop.org/~airlied/linux Pull intel kabylake drm fixes from Dave Airlie: "As mentioned Intel has gathered all the Kabylake fixes from -next, which we've enabled in 4.7 for the first time, these are pretty much limited in scope to only affects kabylake, which is hw that isn't shipping yet. So I'm mostly okay with it going in now. If we don't land this, it might be a good idea to disable kabylake support in 4.7 before we ship" * tag 'drm-fixes-for-v4.7-rc8-intel-kbl' of git://people.freedesktop.org/~airlied/linux: (28 commits) drm/i915/kbl: Introduce the first official DMC for Kabylake. drm/i915: Introduce Kabypoint PCH for Kabylake H/DT. drm/i915/gen9: implement WaConextSwitchWithConcurrentTLBInvalidate drm/i915/gen9: Add WaFbcHighMemBwCorruptionAvoidance drm/i195/fbc: Add WaFbcNukeOnHostModify drm/i915/gen9: Add WaFbcWakeMemOn drm/i915/gen9: Add WaFbcTurnOffFbcWatermark drm/i915/kbl: Add WaClearSlmSpaceAtContextSwitch drm/i915/gen9: Add WaEnableChickenDCPR drm/i915/kbl: Add WaDisableSbeCacheDispatchPortSharing drm/i915/kbl: Add WaDisableGafsUnitClkGating drm/i915/kbl: Add WaForGAMHang drm/i915: Add WaInsertDummyPushConstP for bxt and kbl drm/i915/kbl: Add WaDisableDynamicCreditSharing drm/i915/kbl: Add WaDisableGamClockGating drm/i915/gen9: Enable must set chicken bits in config0 reg drm/i915/kbl: Add WaDisableLSQCROPERFforOCL drm/i915/kbl: Add WaDisableSDEUnitClockGating drm/i915/kbl: Add WaDisableFenceDestinationToSLM for A0 drm/i915/kbl: Add WaEnableGapsTsvCreditFix ...
2016-07-23Merge tag 'drm-fixes-for-v4.7-rc8-intel' of ↵Linus Torvalds2-1/+7
git://people.freedesktop.org/~airlied/linux Pull drm fixes from Dave Airlie: "Two i915 regression fixes. Intel have submitted some Kabylake fixes I'll send separately, since this is the first kernel with kabylake support and they don't go much outside that area I think they should be fine" * tag 'drm-fixes-for-v4.7-rc8-intel' of git://people.freedesktop.org/~airlied/linux: drm/i915: add missing condition for committing planes on crtc drm/i915: Treat eDP as always connected, again
2016-07-23Merge tag 'm68k-for-v4.8-tag1' of ↵Linus Torvalds23-16/+64
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k upddates from Geert Uytterhoeven: - assorted spelling fixes - defconfig updates * tag 'm68k-for-v4.8-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k/defconfig: Update defconfigs for v4.7-rc2 m68k: Assorted spelling fixes
2016-07-23Merge tag 'armsoc-fixes' of ↵Linus Torvalds9-41/+49
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "A handful of fixes before final release: Marvell Armada: - One to fix a typo in the devicetree specifying memory ranges for the crypto engine - Two to deal with marking PCI and device-memory as strongly ordered to avoid hardware deadlocks, in particular when enabling above crypto driver. - Compile fix for PM Allwinner: - DT clock fixes to deal with u-boot-enabled framebuffer (simplefb). - Make R8 (C.H.I.P. SoC) inherit system compatibility from A13 to make clocks register proper. Tegra: - Fix SD card voltage setting on the Tegra3 Beaver dev board Misc: - Two maintainers updates for STM32 and STi platforms" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: tegra: beaver: Allow SD card voltage to be changed MAINTAINERS: update STi maintainer list MAINTAINERS: update STM32 maintainers list ARM: mvebu: compile pm code conditionally ARM: dts: sun7i: Fix pll3x2 and pll7x2 not having a parent clock ARM: dts: sunxi: Add pll3 to simplefb nodes clocks lists ARM: dts: armada-38x: fix MBUS_ID for crypto SRAM on Armada 385 Linksys ARM: mvebu: map PCI I/O regions strongly ordered ARM: mvebu: fix HW I/O coherency related deadlocks ARM: sunxi/dt: make the CHIP inherit from allwinner,sun5i-a13
2016-07-23Merge branch 'linus' of ↵Linus Torvalds2-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: "This fixes a sporadic build failure in the qat driver as well as a memory corruption bug in rsa-pkcs1pad" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: rsa-pkcs1pad - fix rsa-pkcs1pad request struct crypto: qat - make qat_asym_algs.o depend on asn1 headers
2016-07-23Merge branch 'for-linus' of ↵Linus Torvalds3-3/+8
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull key handling fixes from James Morris: "Quoting David Howells: Here are three miscellaneous fixes: (1) Fix a panic in some debugging code in PKCS#7. This can only happen by explicitly inserting a #define DEBUG into the code. (2) Fix the calculation of the digest length in the PE file parser. This causes a failure where there should be a success. (3) Fix the case where an X.509 cert can be added as an asymmetric key to a trusted keyring with no trust restriction if no AKID is supplied. Bugs (1) and (2) aren't particularly problematic, but (3) allows a security check to be bypassed. Happily, this is a recent regression and never made it into a released kernel" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: KEYS: Fix for erroneous trust of incorrectly signed X.509 certs pefile: Fix the failure of calculation for digest PKCS#7: Fix panic when referring to the empty AKID when DEBUG defined
2016-07-23Merge branch 'for-linus' of ↵Linus Torvalds6-31/+39
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: "A few more fixes for the input subsystem: - restore naming for tsc2005 touchscreens as some userspace match on it - fix out of bound access in legacy keyboard driver - fixup in RMI4 driver Everything is tagged for stable as well" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: tsc200x - report proper input_dev name tty/vt/keyboard: fix OOB access in do_compute_shiftstate() Input: synaptics-rmi4 - fix maximum size check for F12 control register 8
2016-07-23Merge branch 'libnvdimm-fixes' of ↵Linus Torvalds2-8/+9
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm fix from Dan Williams: "This contains a regression fix for a problem that was introduced in v4.7-rc6. In 4.7-rc1 we introduced auto-probing for the ACPI DSM (device- specific-method) format that the platform firmware implements for nvdimm devices. We initially fixed a regression in probing the QEMU DSM implementation by making acpi_check_dsm() tolerant of the way QEMU reports the "0 DSMs supported" condition. However, that broke HPE platforms since that tolerance caused the driver to mistakenly match the 1-zero-byte response those platforms give to "unknown" commands. Instead, we simply make the driver tolerant of not finding any supported DSMs. This has been tested to work with both QEMU and HPE platforms. This commit has appeared in a -next release with no reported issues" * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: nfit: make DIMM DSMs optional
2016-07-23Merge tag 'gpio-v4.7-6' of ↵Linus Torvalds1-2/+5
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fix from Linus Walleij: "Compile problem fix for Tegra, Sorry to send this in the last minute but Ingo says this build failure is very prominent so I'm not going to wait for v4.7 before sending it. It is a case of COMPILE_TEST causing more problems than it solves and I'm already swearing about me shooting myself in the foot with that gun :(" * tag 'gpio-v4.7-6' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: tegra: don't auto-enable for COMPILE_TEST
2016-07-23Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds3-6/+5
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Michael Turquette: "Fix a bug in the at91 clk driver, two compile time warnings in sunxi clk drivers, and one bug in a sunxi clk driver introduced in the 4.7 merge window" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: at91: fix clk_programmable_set_parent() clk: sunxi: remove unused variable clk: sunxi: display: Add per-clock flags clk: sunxi: tcon-ch1: Do not return a negative error in get_parent
2016-07-23Merge branch 'for-4.7-fixes' of ↵Linus Torvalds1-0/+6
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata fix from Tejun Heo: "Another fallout from max_sectors bump a couple years ago. The lite-on optical drive times out on large requests" * 'for-4.7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: libata: LITE-ON CX1-JB256-HP needs lower max_sectors
2016-07-23Merge tag 'mmc-v4.7-rc7' of git://git.linaro.org/people/ulf.hansson/mmcLinus Torvalds2-14/+18
Pull MMC fixes from Ulf Hansson: "Here are a few late mmc fixes intended for v4.7 final. MMC core: - Fix eMMC packed command header endianness - Fix free of uninitialized buffer for mmc ioctl MMC host: - pxamci: Fix potential oops in ->probe()" * tag 'mmc-v4.7-rc7' of git://git.linaro.org/people/ulf.hansson/mmc: mmc: pxamci: fix potential oops mmc: block: fix packed command header endianness mmc: block: fix free of uninitialized 'idata->buf'
2016-07-23Merge tag 'sound-4.7-fix2' of ↵Linus Torvalds5-7/+32
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "No surprise, just a few small fixes: a couple of changes are seen in the core part, and both of them are rather for unusual error paths. The rest are the regular HD-audio fixes and one USB-audio regression fix" * tag 'sound-4.7-fix2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: usb-audio: Fix quirks code is not called ALSA: hda: add AMD Stoney PCI ID with proper driver caps ALSA: hda - fix use-after-free after module unload ALSA: pcm: Free chmap at PCM free callback, too ALSA: ctl: Stop notification after disconnection ALSA: hda/realtek - add new pin definition in alc225 pin quirk table
2016-07-23Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds1-35/+39
Pull NVMe fix from Jens Axboe: "Late addition here, it's basically a revert of a patch that was added in this merge window, but has proven to cause problems. This is swapping out the RCU based namespace protection with a good old mutex instead" * 'for-linus' of git://git.kernel.dk/linux-block: nvme: Remove RCU namespace protection
2016-07-23pps: do not crash when failed to registerJiri Slaby1-1/+1
With this command sequence: modprobe plip modprobe pps_parport rmmod pps_parport the partport_pps modules causes this crash: BUG: unable to handle kernel NULL pointer dereference at (null) IP: parport_detach+0x1d/0x60 [pps_parport] Oops: 0000 [#1] SMP ... Call Trace: parport_unregister_driver+0x65/0xc0 [parport] SyS_delete_module+0x187/0x210 The sequence that builds up to this is: 1) plip is loaded and takes the parport device for exclusive use: plip0: Parallel port at 0x378, using IRQ 7. 2) pps_parport then fails to grab the device: pps_parport: parallel port PPS client parport0: cannot grant exclusive access for device pps_parport pps_parport: couldn't register with parport0 3) rmmod of pps_parport is then killed because it tries to access pardev->name, but pardev (taken from port->cad) is NULL. So add a check for NULL in the test there too. Link: http://lkml.kernel.org/r/20160714115245.12651-1-jslaby@suse.cz Signed-off-by: Jiri Slaby <jslaby@suse.cz> Acked-by: Rodolfo Giometti <giometti@enneenne.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-23tools/vm/slabinfo: fix an unintentional printfDan Carpenter1-1/+2
The curly braces are missing here so we print stuff unintentionally. Fixes: 9da4714a2d44 ('slub: slabinfo update for cmpxchg handling') Link: http://lkml.kernel.org/r/20160715211243.GE19522@mwanda Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Christoph Lameter <cl@linux.com> Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Laura Abbott <labbott@fedoraproject.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-23testing/radix-tree: fix a macro expansion bugDan Carpenter1-1/+1
There are no parentheses around this macro and it causes a problem when we do: index = rand() % THRASH_SIZE; Link: http://lkml.kernel.org/r/20160715210953.GC19522@mwanda Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-23radix-tree: fix radix_tree_iter_retry() for tagged iterators.Andrey Ryabinin1-0/+1
radix_tree_iter_retry() resets slot to NULL, but it doesn't reset tags. Then NULL slot and non-zero iter.tags passed to radix_tree_next_slot() leading to crash: RIP: radix_tree_next_slot include/linux/radix-tree.h:473 find_get_pages_tag+0x334/0x930 mm/filemap.c:1452 .... Call Trace: pagevec_lookup_tag+0x3a/0x80 mm/swap.c:960 mpage_prepare_extent_to_map+0x321/0xa90 fs/ext4/inode.c:2516 ext4_writepages+0x10be/0x2b20 fs/ext4/inode.c:2736 do_writepages+0x97/0x100 mm/page-writeback.c:2364 __filemap_fdatawrite_range+0x248/0x2e0 mm/filemap.c:300 filemap_write_and_wait_range+0x121/0x1b0 mm/filemap.c:490 ext4_sync_file+0x34d/0xdb0 fs/ext4/fsync.c:115 vfs_fsync_range+0x10a/0x250 fs/sync.c:195 vfs_fsync fs/sync.c:209 do_fsync+0x42/0x70 fs/sync.c:219 SYSC_fdatasync fs/sync.c:232 SyS_fdatasync+0x19/0x20 fs/sync.c:230 entry_SYSCALL_64_fastpath+0x23/0xc1 arch/x86/entry/entry_64.S:207 We must reset iterator's tags to bail out from radix_tree_next_slot() and go to the slow-path in radix_tree_next_chunk(). Fixes: 46437f9a554f ("radix-tree: fix race in gang lookup") Link: http://lkml.kernel.org/r/1468495196-10604-1-git-send-email-aryabinin@virtuozzo.com Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> Acked-by: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-23mm: memcontrol: fix cgroup creation failure after many small jobsJohannes Weiner3-24/+87
The memory controller has quite a bit of state that usually outlives the cgroup and pins its CSS until said state disappears. At the same time it imposes a 16-bit limit on the CSS ID space to economically store IDs in the wild. Consequently, when we use cgroups to contain frequent but small and short-lived jobs that leave behind some page cache, we quickly run into the 64k limitations of outstanding CSSs. Creating a new cgroup fails with -ENOSPC while there are only a few, or even no user-visible cgroups in existence. Although pinning CSSs past cgroup removal is common, there are only two instances that actually need an ID after a cgroup is deleted: cache shadow entries and swapout records. Cache shadow entries reference the ID weakly and can deal with the CSS having disappeared when it's looked up later. They pose no hurdle. Swap-out records do need to pin the css to hierarchically attribute swapins after the cgroup has been deleted; though the only pages that remain swapped out after offlining are tmpfs/shmem pages. And those references are under the user's control, so they are manageable. This patch introduces a private 16-bit memcg ID and switches swap and cache shadow entries over to using that. This ID can then be recycled after offlining when the CSS remains pinned only by objects that don't specifically need it. This script demonstrates the problem by faulting one cache page in a new cgroup and deleting it again: set -e mkdir -p pages for x in `seq 128000`; do [ $((x % 1000)) -eq 0 ] && echo $x mkdir /cgroup/foo echo $$ >/cgroup/foo/cgroup.procs echo trex >pages/$x echo $$ >/cgroup/cgroup.procs rmdir /cgroup/foo done When run on an unpatched kernel, we eventually run out of possible IDs even though there are no visible cgroups: [root@ham ~]# ./cssidstress.sh [...] 65000 mkdir: cannot create directory '/cgroup/foo': No space left on device After this patch, the IDs get released upon cgroup destruction and the cache and css objects get released once memory reclaim kicks in. [hannes@cmpxchg.org: init the IDR] Link: http://lkml.kernel.org/r/20160621154601.GA22431@cmpxchg.org Fixes: b2052564e66d ("mm: memcontrol: continue cache reclaim from offlined groups") Link: http://lkml.kernel.org/r/20160617162516.GD19084@cmpxchg.org Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reported-by: John Garcia <john.garcia@mesosphere.io> Reviewed-by: Vladimir Davydov <vdavydov@virtuozzo.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: Nikolay Borisov <kernel@kyup.com> Cc: <stable@vger.kernel.org> [3.19+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-22gpio: tegra: don't auto-enable for COMPILE_TESTArnd Bergmann1-2/+5
I stumbled over a build error with COMPILE_TEST and CONFIG_OF disabled: drivers/gpio/gpio-tegra.c: In function 'tegra_gpio_probe': drivers/gpio/gpio-tegra.c:603:9: error: 'struct gpio_chip' has no member named 'of_node' The problem is that the newly added GPIO_TEGRA Kconfig symbol does not have a dependency on CONFIG_OF. However, there is another problem here as the driver gets enabled unconditionally whenever COMPILE_TEST is set. This fixes both problems, by making the symbol user-visible when COMPILE_TEST is set and default-enabled for ARCH_TEGRA=y. As a side-effect, it is now possible to compile-test a Tegra kernel with GPIO support disabled, which is harmless. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 4dd4dd1d2120 ("gpio: tegra: Allow compile test") Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-07-22libceph: apply new_state before new_up_client on incrementalsIlya Dryomov1-43/+113
Currently, osd_weight and osd_state fields are updated in the encoding order. This is wrong, because an incremental map may look like e.g. new_up_client: { osd=6, addr=... } # set osd_state and addr new_state: { osd=6, xorstate=EXISTS } # clear osd_state Suppose osd6's current osd_state is EXISTS (i.e. osd6 is down). After applying new_up_client, osd_state is changed to EXISTS | UP. Carrying on with the new_state update, we flip EXISTS and leave osd6 in a weird "!EXISTS but UP" state. A non-existent OSD is considered down by the mapping code 2087 for (i = 0; i < pg->pg_temp.len; i++) { 2088 if (ceph_osd_is_down(osdmap, pg->pg_temp.osds[i])) { 2089 if (ceph_can_shift_osds(pi)) 2090 continue; 2091 2092 temp->osds[temp->size++] = CRUSH_ITEM_NONE; and so requests get directed to the second OSD in the set instead of the first, resulting in OSD-side errors like: [WRN] : client.4239 192.168.122.21:0/2444980242 misdirected client.4239.1:2827 pg 2.5df899f2 to osd.4 not [1,4,6] in e680/680 and hung rbds on the client: [ 493.566367] rbd: rbd0: write 400000 at 11cc00000 (0) [ 493.566805] rbd: rbd0: result -6 xferred 400000 [ 493.567011] blk_update_request: I/O error, dev rbd0, sector 9330688 The fix is to decouple application from the decoding and: - apply new_weight first - apply new_state before new_up_client - twiddle osd_state flags if marking in - clear out some of the state if osd is destroyed Fixes: http://tracker.ceph.com/issues/14901 Cc: stable@vger.kernel.org # 3.15+: 6dd74e44dc1d: libceph: set 'exists' flag for newly up osd Cc: stable@vger.kernel.org # 3.15+ Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Josh Durgin <jdurgin@redhat.com>
2016-07-22crypto: rsa-pkcs1pad - fix rsa-pkcs1pad request structHerbert Xu1-2/+2
To allow for child request context the struct akcipher_request child_req needs to be at the end of the structure. Cc: stable@vger.kernel.org Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-22ovl: verify upper dentry in ovl_remove_and_whiteout()Maxim Patlasov1-30/+24
The upper dentry may become stale before we call ovl_lock_rename_workdir. For example, someone could (mistakenly or maliciously) manually unlink(2) it directly from upperdir. To ensure it is not stale, let's lookup it after ovl_lock_rename_workdir and and check if it matches the upper dentry. Essentially, it is the same problem and similar solution as in commit 11f3710417d0 ("ovl: verify upper dentry before unlink and rename"). Signed-off-by: Maxim Patlasov <mpatlasov@virtuozzo.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Cc: <stable@vger.kernel.org>
2016-07-22packet: propagate sock_cmsg_send() errorSoheil Hassas Yeganeh1-3/+1
sock_cmsg_send() can return different error codes and not only -EINVAL, and we should properly propagate them. Fixes: c14ac9451c34 ("sock: enable timestamping using control messages") Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com> Cc: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-21crypto: qat - make qat_asym_algs.o depend on asn1 headersJan Stancek1-0/+1
Parallel build can sporadically fail because asn1 headers may not be built yet by the time qat_asym_algs.o is compiled: drivers/crypto/qat/qat_common/qat_asym_algs.c:55:32: fatal error: qat_rsapubkey-asn1.h: No such file or directory #include "qat_rsapubkey-asn1.h" Cc: stable@vger.kernel.org Signed-off-by: Jan Stancek <jstancek@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2016-07-20Input: tsc200x - report proper input_dev nameMichael Welling4-6/+25
Passes input_id struct to the common probe function for the tsc200x drivers instead of just the bustype. This allows for the use of the product variable to set the input_dev->name variable according to the type of touchscreen used. Note that when we introduced support for TSC2004 we started calling everything TSC200X, so let's keep this quirk. Signed-off-by: Michael Welling <mwelling@ieee.org> Cc: stable@vger.kernel.org Acked-by: Pavel Machek <pavel@ucw.cz> Acked-by: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2016-07-20tty/vt/keyboard: fix OOB access in do_compute_shiftstate()Dmitry Torokhov1-21/+9
The size of individual keymap in drivers/tty/vt/keyboard.c is NR_KEYS, which is currently 256, whereas number of keys/buttons in input device (and therefor in key_down) is much larger - KEY_CNT - 768, and that can cause out-of-bound access when we do sym = U(key_maps[0][k]); with large 'k'. To fix it we should not attempt iterating beyond smaller of NR_KEYS and KEY_CNT. Also while at it let's switch to for_each_set_bit() instead of open-coding it. Reported-by: Sasha Levin <sasha.levin@oracle.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-17 18:40:24 +0000